New translations flashing-ntrboot-(3ds-multi-system).md (Lithuanian)

docs/lt_LT/flashing-ntrboot-(3ds-multi-system).md

@@ -0,0 +1,60 @@
+# Flashing ntrboot (3DS Multi System)
+
+## Required Reading
+
+Before proceeding, ensure you have read all of the information on [ntrboot](ntrboot).
+
+This method requires temporary access to a second 3DS family console that is already running boot9strap. This does not require your flashcart to support either 3DS's version.
+
+::: danger
+
+Note that in some rare circumstances, it may be possible for the flashing process to **brick** a counterfeit flashcart and render it permanently unusable. This is unlikely, but nevertheless, only original listed flashcarts are supported. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](https://www.nds-card.com/)).
+
+:::
+
+## What You Need
+
+- Your ntrboot compatible flashcart
+- Two 3DS family consoles
+    - **The source 3DS**: the 3DS family console that is already running boot9strap
+    - **The target 3DS**: the 3DS family console on stock firmware
+- The v1.3 release of [boot9strap-ntr](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) (direct download)
+- The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) (`ntrboot_flasher.firm`)
+
+## Instructions
+
+### Section I - Prep Work
+
+1. Power off **the source 3DS**
+2. Insert **the source 3DS**'s SD card into your computer
+3. Create a folder named `ntrboot` on the root of your SD card
+4. Copy `boot9strap_ntr.firm` and `boot9strap_ntr.firm.sha` from the boot9strap ntr `.zip` to the `/ntrboot/` folder on your SD card
+5. Copy `ntrboot_flasher.firm` to the `/luma/payloads/` folder on **the source 3DS**'s SD card
+6. Reinsert **the source 3DS**'s SD card back into **the source 3DS**
+7. Insert your ntrboot compatible DS / DSi flashcart into **the source 3DS**
+
+### Section II - Flashing ntrboot
+
+1. Launch the Luma3DS chainloader by holding (Start) during boot on **the source 3DS**
+2. Select "ntrboot_flasher"
+3. Read the red screen warning
+4. Press (A) to continue
+5. Select your flashcart
+    - If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option
+6. Select "Dump Flash"
+7. Wait until the process is completed
+8. Press (A) to continue
+9. Press (A) to return to the main menu
+10. Select "Inject Ntrboot"
+11. Press (A) for retail unit ntrboot
+12. Wait until the process is completed
+13. Press (A) to return to the main menu
+14. Press (B) to power off **the source 3DS**
+
+___
+
+::: tip
+
+Continue to [Installing boot9strap (ntrboot)](installing-boot9strap-\(ntrboot\))
+
+:::