Move remaining pages to VitePress

docs/ro_RO/formatting-sd-(linux).md

@@ -0,0 +1,41 @@
+---
+title: "Formatting SD (Linux)"
+---
+
+{% include toc title="Cuprins" %}
+
+### Lectură obligatorie
+
+This is an add-on section for formatting an SD card to work with the 3DS.
+
+If the 3DS already recognizes the SD card, this guide is not required.
+
+Această pagină este doar pentru utilizatorii de Linux. If you are not on Linux, check out the [Formatting SD (Windows)](formatting-sd-(windows)) or [Formatting SD (Mac)](formatting-sd-(mac)) pages.
+
+### Instrucțiuni
+
+1. Make sure your SD card is **not** inserted
+1. Launch the Linux Terminal
+1. Type `watch "lsblk"`
+1. Introduceți cardul SD în calculator
+1. Observe the output. It should match something like this:
+```
+NAME        MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT
+mmcblk0     179:0    0   3,8G  0 disk
+└─mmcblk0p1 179:1    0   3,7G  0 part /run/media/user/FFFF-FFFF
+```
+1. Take note of the device name. In our example above, it was `mmcblk0p1`
+    + If `RO` is set to 1, make sure the lock switch is not slid down
+1. Hit CTRL + C to exit the menu
+1. Type in the following for your SD card:
+    + 2GB or lower: `sudo mkfs.fat /dev/(device name from above) -s 64 -F 16`
+        + This creates a single FAT16 partition with 32 KB cluster size on the SD card
+    + 4GB - 128GB: `sudo mkfs.fat /dev/(device name from above) -s 64 -F 32`
+        + This creates a single FAT32 partition with 32 KB cluster size on the SD card
+    + 128GB or higher: `sudo mkfs.fat /dev/(device name from above) -s 128 -F 32`
+        + This creates a single FAT32 partition with 64 KB cluster size on the SD card
+
+### Troubleshooting
+
+* SD card remains undetected by console or continues to display the wrong capacity after formatting
+    + Your SD card may be partitioned or have unallocated space. Follow the instructions [here](https://wiki.hacks.guide/wiki/SD_Clean/Linux) to reformat your SD card.