diff --git a/_data/navigation/it_IT.yml b/_data/navigation/it_IT.yml
index f0dca5db5a..9fac6f9e40 100644
--- a/_data/navigation/it_IT.yml
+++ b/_data/navigation/it_IT.yml
@@ -86,29 +86,29 @@ sidebar_pages:
     title: BannerBomb3 + Fredtool (TWN)
     url: bannerbomb3-fredtool-(twn)
   - 
-    title: Installing boot9strap (Hardmod)
+    title: Installazione di boot9strap (Hardmod)
     url: installing-boot9strap-(hardmod)
   - 
-    title: Installing boot9strap (SafeB9SInstaller)
+    title: Installazione di boot9strap (SafeB9SInstaller)
     url: installing-boot9strap-(safeb9sinstaller)
   - 
-    title: Installing boot9strap (ntrboot)
+    title: Installazione di boot9strap (ntrboot)
     url: installing-boot9strap-(ntrboot)
   - 
-    title: Installing boot9strap (Soundhax)
+    title: Installazione di boot9strap (Soundhax)
     url: installing-boot9strap-(soundhax)
   - 
-    title: Installing boot9strap (Fredtool)
+    title: Installazione di boot9strap (Fredtool)
     url: installing-boot9strap-(fredtool)
   - 
-    title: Installing boot9strap (USM)
+    title: Installazione di boot9strap (USM)
     url: installing-boot9strap-(usm)
   - 
-    title: Installing boot9strap (PicHaxx)
+    title: Installazione di boot9strap (PicHaxx)
     url: installing-boot9strap-(pichaxx)
   - 
-    title: Installing boot9strap (kartdlphax)
+    title: Installazione di boot9strap (kartdlphax)
     url: installing-boot9strap-(kartdlphax)
   - 
-    title: Finalizing Setup
+    title: Completamento dell'installazione
     url: finalizing-setup
diff --git a/_data/navigation/ko_KR.yml b/_data/navigation/ko_KR.yml
index 4e5a4eb58c..f3cf78a1d4 100644
--- a/_data/navigation/ko_KR.yml
+++ b/_data/navigation/ko_KR.yml
@@ -86,16 +86,16 @@ sidebar_pages:
     title: BannerBomb3 + Fredtool (TWN)
     url: bannerbomb3-fredtool-(twn)
   - 
-    title: Installing boot9strap (Hardmod)
+    title: boot9strap 설치 (하드모드)
     url: installing-boot9strap-(hardmod)
   - 
-    title: Installing boot9strap (SafeB9SInstaller)
+    title: boot9strap 설치 (SafeB9SInstaller)
     url: installing-boot9strap-(safeb9sinstaller)
   - 
-    title: Installing boot9strap (ntrboot)
+    title: boot9strap 설치 (ntrboot)
     url: installing-boot9strap-(ntrboot)
   - 
-    title: Installing boot9strap (Soundhax)
+    title: boot9strap 설치 (Soundhax)
     url: installing-boot9strap-(soundhax)
   - 
     title: boot9strap 설치 (Fredtool)
@@ -104,11 +104,11 @@ sidebar_pages:
     title: boot9strap 설치 (USM)
     url: installing-boot9strap-(usm)
   - 
-    title: Installing boot9strap (PicHaxx)
+    title: boot9strap 설치 (PicHaxx)
     url: installing-boot9strap-(pichaxx)
   - 
     title: boot9strap 설치 (kartdlphax)
     url: installing-boot9strap-(kartdlphax)
   - 
-    title: Finalizing Setup
+    title: 마무리 단계
     url: finalizing-setup
diff --git a/_data/navigation/nl_NL.yml b/_data/navigation/nl_NL.yml
index 71da570cbb..c19c465661 100644
--- a/_data/navigation/nl_NL.yml
+++ b/_data/navigation/nl_NL.yml
@@ -35,7 +35,7 @@ top:
     title: Deze website gebruikt cookies om de voortgang op de zijbalk bij te houden en de site te verbeteren.
 bottom:
   - 
-    title: Voor Engelse support kan je voor hulp vragen in <a href="https://discord.gg/MWxPgEp"> Nintendo Homebrew op Discord</a>.
+    title: Voor hulp in het Engels kan je terecht bij <a href="https://discord.gg/MWxPgEp">Nintendo Homebrew op Discord</a>.
   - 
     title: 'Vind je dit een goede handleiding? We accepteren <a href="contribute#donations">donaties</a>.'
 footer:
diff --git a/_pages/it_IT/bannerbomb3-fredtool-(twn).txt b/_pages/it_IT/bannerbomb3-fredtool-(twn).txt
index 7272229e3f..54862ce4d4 100644
--- a/_pages/it_IT/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/it_IT/bannerbomb3-fredtool-(twn).txt
@@ -8,19 +8,19 @@ title: "BannerBomb3 + Fredtool (TWN)"
 
 Per eseguire un dump dei DSiWare di sistema, approfittiamo di una falla di sicurezza nella sezione Gestione Nintendo DSiWare dell'applicazione Impostazioni della console.
 
-To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.
+Per realizzare l'obiettivo, utilizziamo la chiave di cifratura della tua console (movable.sed) per generare un backup DSiWare che induce la console a creare un dump dell'applicazione Impostazioni Internet DSi nella directory principale della scheda SD.
 
-Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
+Una volta ottenuto un backup DSiWare, si può initiettare nella "Modalità download" un titolo DSiWare utilizzabile per installare un custom firmware.
 
-These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
+Queste istruzioni sono solo per le console taiwanesi (come indicato da una T alla fine della versione di sistema, ad esempio 11.15.0-39T)! Se la tua console proviene da qualsiasi altra regione, [scegli un altro metodo](seedminer#next-steps).
 {: .notice--warning}
 
-### What you need
+### Cosa serve
 
-- Your `movable.sed` file completing [Seedminer](seedminer)
-- The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
-- The latest release of [b9stool](https://github.com/zoogie/b9sTool/releases/latest)
-- The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
+- Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer)
+- L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+- L'ultima versione di [b9stool](https://github.com/zoogie/b9sTool/releases/latest)
+- L'ultima versione di [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
 
 #### Sezione I - Controllo del CFW
 
@@ -40,71 +40,71 @@ Se visualizzi un menu di configurazione, hai già un CFW e continuando con quest
     + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
 1. Copia il file `boot.nds` (B9STool) nella directory principale della tua scheda SD
 1. Copia la cartella `private` presente nell'archivio `.zip` di Frogminer_save nella directory principale della tua scheda SD
-1. Keep your SD card in your computer - there are more things to do in the next section
+1. Tieni la scheda SD nel tuo computer - ci sono altre cose da fare nella prossima sezione
 
 ![]({{ "/images/screenshots/fredtool-root-layout.png" | absolute_url }})
 {: .notice--info}
 
-#### Section III - BannerBomb3
+#### Sezione III - BannerBomb3
 
-1. Open the [DSIHaxInjector V2](https://jenkins.nelthorya.net/job/DSIHaxInjector%20v2/build?delay=0sec) website on your computer
-1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
-1. Under the "MovableSed" field, upload your `movable.sed`using the "Browse..." option
-1. Click "Build"
-1. Wait a few seconds, then click "Last build (#number) x sec ago"
-1. Click the "output_(name).zip" link
+1. Apri il sito [DSIHaxInjector V2](https://jenkins.nelthorya.net/job/DSIHaxInjector%20v2/build?delay=0sec) sul tuo computer
+1. Sotto il campo "Username" inserisci un nome alfanumerico qualunque (senza spazi o caratteri speciali)
+1. Sotto il campo "MovableSed", carica il tuo file `movable.sed` cliccando sull'opzione "Browse..."
+1. Clicca "Build"
+1. Attendi alcuni secondi, quindi fai clic su "Last build (#number) x sec ago"
+1. Clicca il link "output_(name).zip"
 1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 
-    +  `<ID0>` is the same as the one you used in Seedminer
-    + `<ID1>` is a 32-character folder inside of `<ID0>`
-    + If the `Nintendo DSiWare` folder does not exist, then create it
-1. If there is anything currently in the `Nintendo DSiWare` folder, move it elsewhere for safekeeping
-1. Open the output_(name) `.zip` file and navigate to `China_Taiwan` -> `output_setup`
-1. Copy all six `.bin` files to the `Nintendo DSiWare` folder
+    + `<ID0>` è lo stesso utilizzato in Seedminer
+    + `<ID1>` è una cartella dal nome lungo 32 caratteri all'interno di `<ID0>`
+    + Se la cartella `Nintendo DSiWare` non esiste, creala
+1. Se la cartella `Nintendo DSiWare` contiene qualcosa, spostalo altrove per sicurezza
+1. Apri il file `.zip` output_(nome) e naviga su `China_Taiwan` -> `output_setup`
+1. Copia tutti i sei file `.bin` nella cartella `Nintendo DSiWare`
 1. Reinserisci la scheda SD nella tua console
 1. Accendi la console
 1. Avvia "Impostazioni della console"
-1. Navigate to `Data Management` -> `DSiWare` -> `SD Card` -> (page 2)
-1. Take note of what number is on the DSiWare title on the second page (it will be a number between 1 and 6)
+1. Entra in `Gestione dati` -> `DSiWare` -> `Scheda SD` -> (pagina 2)
+1. Prendi nota del numero sul titolo DSiWare nella seconda pagina (sarà un numero compreso tra 1 e 6)
 1. Spegni il tuo 3DS
 1. Inserisci la scheda SD nel tuo computer
 1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 
-1. Open the output_(name) `.zip` file and navigate to `China_Taiwan` -> `output_hax`
-1. Copy the `.bin` file that is the same number as the one that was on the second page of the DSiWare Management menu to the `Nintendo DSiWare` folder, and overwrite when prompted
+1. Apri il file `.zip` output_(nome) e naviga su `China_Taiwan` -> `output_hax`
+1. Copia il file `.bin` con lo stesso numero di quello nella seconda pagina del menu "Gestione Nintendo DSiWare" nella cartella `Nintendo DSiWare`, e sovrascrivi quando richiesto
 1. Accendi la console
 1. Avvia "Impostazioni della console"
-1. Navigate to `Data Management` -> `DSiWare` -> `SD Card`
-1. Wait a while
-     + The following should happen, in this order: A progress swirl, a short freeze, the bottom screen turning purple, the music stopping, then the device showing an error message and rebooting
-    + If you did not see the purple screen, then something went wrong
-1. You should now have the file `42383821.bin` on the root of your SD card
+1. Entra in `Gestione Dati` -> `DSiWare` -> `Scheda SD`
+1. Attendi
+     + Dovrebbero succedere in ordine le seguenti cose: Una barra di caricamento, un breve blocco, lo schermo inferiore viola, l'arresto della musica, infine la console mostrerà un errore e si riavvierà
+    + Se non hai visto lo schermo viola, qualcosa è andato storto
+1. Ora dovresti avere il file `42383821.bin` nella directory principale della tua scheda SD
 1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 
-1. Delete all of the `.bin` files in the `Nintendo DSiWare` folder
+1. Elimina tutti i file `.bin` dalla cartella `Nintendo DSiWare`
 
-#### Section IV - Fredtool
+#### Sezione IV - Fredtool
 
-1. Open the [DSIHaxInjector_new](https://jenkins.nelthorya.net/job/DSIHaxInjector_new/build?delay=0sec) website on your computer
-1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
-    + You might want to put in a different name to differentiate it from BannerBomb3's output
-1. Under the "DSiBin" field, upload your `42383821.bin` file using the first "Browse..." option
-1. Under the "MovableSed" field, upload your `movable.sed` file using the second "Browse..." option
-1. Under the "InjectionTarget" field, set the injection target to `DSdownloadplay`(NOT memorypit)
-1. Click "Build"
-1. Wait a few seconds, then click "Last build (#number) x sec ago"
-1. Click the "output_(name).zip" link
+1. Apri il sito [DSIHaxInjector_new](https://jenkins.nelthorya.net/job/DSIHaxInjector_new/build?delay=0sec) sul tuo computer
+1. Sotto il campo "Username" inserisci un nome alfanumerico qualunque (senza spazi o caratteri speciali)
+    + Ti conviene inserire un nome diverso per differenziarlo dall'output di BannerBomb3
+1. Sul campo "DSiBin", carica il tuo file `42383821.bin` usando la prima opzione "Browse..."
+1. Sul campo "MovableSed", carica il tuo file `movable.sed` usando la seconda opzione "Browse..."
+1. Sul campo "InjectionTarget", imposta l'obiettivo dell'iniezione su `DSdownloadplay` (NON memorypit)
+1. Clicca "Build"
+1. Attendi alcuni secondi, quindi fai clic su "Last build (#number) x sec ago"
+1. Clicca il link "output_(name).zip"
 1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 
-1. Copy the `484E4441.bin`  file from the `hax` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
+1. Copia il file `484E4441.bin` dalla cartella `hax` dall'archivio DSiWare appena scaricato (`output_(name).zip`) nella cartella `Nintendo DSiWare`
 1. Reinserisci la scheda SD nella tua console
 1. Accendi la console
 1. Avvia "Impostazioni della console"
 1. Entra in `Gestione dati` -> `DSiWare`
-1. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
-1. Select “Copy”, then select “OK”
-1. Exit System Settings
-1. Launch Download Play on your device (the orange icon with a 3DS on it)
+1. Nella sezione "Scheda SD", scegli il titolo "Haxxxxxxxxx!"
+1. Seleziona "Copia", quindi "OK”
+1. Esci da Impostazioni della console
+1. Avvia Download Play sulla tua console (l'icona arancione con un 3DS)
 1. Seleziona "Nintendo DS" 
-1. If the exploit was successful, your 3DS will have loaded into the JPN version of Flipnote Studio
+1. Se l'exploit ha avuto successo, la tua console avrà caricato la versione JPN di Flipnote Studio
 
-#### Section V - Flipnote Exploit
+#### Sezione V - Exploit Flipnote
 
 Se desideri una guida visiva per questa parte, è disponibile [qui](https://zoogie.github.io/web/flipnote_directions/).
 {: .notice--info}
@@ -120,35 +120,35 @@ Se desideri una guida visiva per questa parte, è disponibile [qui](https://zoog
 1. Scorri a sinistra fino a visualizzare la bobina "1/3"
 1. Seleziona il quarto riquadro con la lettera "A" all'interno
 1. Se l'exploit ha avuto successo, la tua console avrà caricato b9sTool
-1. Using the D-Pad, move to “Install boot9strap”
-    + If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
+1. Usando il D-Pad, vai su "Install boot9strap”
+    + Se salti questo passaggio, la console si riavvierà nel menu HOME senza aver installato boot9strap, e sarà necessario riaprire l'applicazione Modalità download DS e ricominciare dall'inizio di questa sezione
 1. Premi (A), quindi premi START e SELECT contemporaneamente per avviare il processo
-1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+1. Al termine, quando lo schermo inferiore presenterà la scritta "done.", esci da b9sTool, quindi spegni la console
     + Potresti dover forzare lo spegnimento tenendo premuto il pulsante di accensione
     + Se sei nel menu di configurazione di Luma, continua senza spegnere la console
 
-#### Section VI - Configuring Luma3DS
+#### Sezione VI - Configurare Luma3DS
 
 1. Avvia la tua console tenendo premuto (Select) per avviare il menu delle opzioni di Luma
-    + If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
-    + If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
+    + Se riscontri problemi all'avvio del menu di configurazione di Luma, [segui questa guida per risolvere il problema](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+    + Se la luce blu del tuo 3DS si accende e si spegne, ti manca il file `boot.firm` nella directory principale della tua scheda SD
 1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni:
     + “Show NAND or user string in System Settings”
 1. Premi (Start) per salvare e riavviare il 3DS
 
-#### Section VII - Restoring DS Download Play
+#### Sezione VII - Ripristino della Modalità Download DS
 
 1. Spegni il tuo 3DS
 1. Inserisci la scheda SD nel tuo computer
 1. Nella tua scheda SD, entra in `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 
-1. Copy the `484E4441.bin`  file from the `clean` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
+1. Copia il file `484E4441.bin` dalla cartella `clean` dall'archivio DSiWare appena scaricato (`output_(name).zip) nella cartella `Nintendo DSiWare`
 1. Reinserisci la scheda SD nella tua console
 1. Accendi la console
 1. Avvia "Impostazioni della console"
 1. Entra in `Gestione dati` -> `DSiWare`
-1. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
-1. Select “Copy”, then select “OK”
-1. Exit System Settings
+1. Nella sezione "Scheda SD", scegli il titolo "Haxxxxxxxxx!"
+1. Seleziona "Copia", quindi "OK”
+1. Esci da Impostazioni della console
 1. Spegni il tuo 3DS
 
 ___
diff --git a/_pages/it_IT/bannerbomb3.txt b/_pages/it_IT/bannerbomb3.txt
index 21871aa0ab..8212b3fb1c 100644
--- a/_pages/it_IT/bannerbomb3.txt
+++ b/_pages/it_IT/bannerbomb3.txt
@@ -12,7 +12,7 @@ Per realizzare l'obiettivo, utilizziamo la chiave di cifratura della tua console
 
 Queste istruzioni funzionano su console americane, europee, giapponesi e coreane, indicate rispettivamente dalle lettere U, E, J o K dopo la versione del sistema operativo.
 
-If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
+Se hai una console taiwanese (indicata da una T dopo la versione di sistema), segui invece [questa pagina](bannerbomb3-fredtool-(twn)).
 {: ..notice--warning}
 
 ### Cosa serve
diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt
index 71f30bcd1f..e8f75c227c 100644
--- a/_pages/it_IT/finalizing-setup.txt
+++ b/_pages/it_IT/finalizing-setup.txt
@@ -32,7 +32,7 @@ Se la tua precedente installazione CFW era basata su EmuNAND e desideri spostare
 * La versione 3.7.4 di [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/tag/v3.7.4) (il file `.cia`)
 * L'ultima versione di [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest) (il file `.cia`)
 * L'ultima versione di [Universal-Updater](https://github.com/Universal-Team/Universal-Updater/releases/latest) (il file `.cia`)
-* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) (get **both** the `.cia` and `.3dsx` files)
+* L'ultima versione di [FBI](https://github.com/Steveice10/FBI/releases/latest) (**entrambi** i file `.cia` e `.3dsx`)
 * L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) (il file `.zip` di GodMode9)
 
 ### Istruzioni
@@ -85,9 +85,9 @@ Questi screenshot indicano la minima struttura che la scheda SD deve avere per p
 
 1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina
 1. Seleziona "Miscellaneous options"
-1. Select "Dump DSP firmware"
+1. Seleziona "Dump DSP firmware"
 1. Premi (B) per continuare
-1. Select "Nullify user time offset"
+1. Seleziona "Nullify user time offset"
 1. Premi (B) per continuare
 1. Premi (B) per tornare al menu principale di Rosalina
 1. Premi (B) per uscire dal menu di Rosalina
diff --git a/_pages/it_IT/restoring-updating-cfw.txt b/_pages/it_IT/restoring-updating-cfw.txt
index 65d6b73b70..83ab32d97f 100644
--- a/_pages/it_IT/restoring-updating-cfw.txt
+++ b/_pages/it_IT/restoring-updating-cfw.txt
@@ -8,7 +8,7 @@ title: "Ripristinare / Aggiornare il CFW"
 
 Questa pagina prepara una console con un'installazione moderna preesistente di boot9strap alla reinstallazione e/o aggiornamento delle applicazioni del custom firmware. Può anche essere utilizzata in caso di perdita o corruzione della scheda SD.
 
-Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS will be unable to recognize it. If your SD card is not yet properly formatted, use one of these pages to format it, depending on your operating system: [Windows](formatting-sd-(windows)), [Mac](formatting-sd-(mac)), [Linux](formatting-sd-(linux)).
+La scheda SD deve essere formattata come FAT32 per seguire questa guida, altrimenti il 3DS non sarà in grado di riconoscerla. Se la scheda SD non è ancora formattata correttamente, utilizzare una di queste pagine per formattarla, a seconda del sistema operativo: [Windows](formatting-sd-(windows)), [Mac](formatting-sd-(mac)), [Linux](formatting-sd-(linux)).
 
 ### Cosa serve
 * L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
@@ -28,7 +28,7 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
 
 #### Sezione II - Configurare Luma3DS
 
-1. Press and hold (Select), and while holding (Select), power on your device
+1. Premi (Select) e accendi la console continuando a tenerlo premuto
 	* Adesso dovresti visualizzare la schermata di configurazione di Luma3DS
 1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni:
 	* **"Show NAND or user string in System Settings"**
diff --git a/_pages/it_IT/seedminer.txt b/_pages/it_IT/seedminer.txt
index d55ec25372..9ede935f48 100644
--- a/_pages/it_IT/seedminer.txt
+++ b/_pages/it_IT/seedminer.txt
@@ -73,16 +73,16 @@ Prosegui con l'[Installazione di boot9strap (PicHaxx)](installing-boot9strap-(pi
 
 Seedminer utilizza il tuo file `movable.sed` per sfruttare gli exploit presenti nel firmware SAFE_MODE presente in ogni console 3DS.
 
-This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
+Queste istruzioni sono consigliate solo se per qualche motivo non sei in grado di seguire il metodo PicHaxx + universal-otherapp, come l'impossibilità di accedere all'eShop o l'utilizzo di un 3DS coreano.
 
 Prosegui con l'[Installazione di boot9strap (USM)](installing-boot9strap-(usm))
 {: .notice--warning}
 
 ___
 
-#### Taiwan consoles only
+#### Solo per console dal Taiwan
 
-If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.**
+Se hai una console Taiwanese (indicata con una T al termine della versione del sistema, come ad esempio 11.15.0-39**T**), devi seguire queste istruzioni. **Console di altre regioni possono non seguire queste istruzioni.**
 
-Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn))
+Prosegui con [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn))
 {: .notice--warning}
\ No newline at end of file
diff --git a/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt b/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt
index 9e8b49a21f..c0ee87d6ec 100644
--- a/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/ko_KR/bannerbomb3-fredtool-(twn).txt
@@ -8,19 +8,19 @@ title: "BannerBomb3 + Fredtool (TWN)"
 
 시스템 DSiWare를 덤프 하기 위해, DSiWare 데이터 관리 설정 창에 취약점을 악용합니다.
 
-To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.
+이것은 시스템의 암호화 키 (movable.sed)를 이용해 DSiWare 백업을 만들어 DSi 인터넷 설정을 SD 카드 루트에 덤프할 수 있도록 만듭니다.
 
 Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
 
 These instructions are for Taiwanese consoles ONLY (as indicated by a T at the end of the system version, e.g. 11.15.0-39T)! If your console is from any other region, [choose another method](seedminer#next-steps).
 {: .notice--warning}
 
-### What you need
+### 준비물
 
-- Your `movable.sed` file completing [Seedminer](seedminer)
-- The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
-- The latest release of [b9stool](https://github.com/zoogie/b9sTool/releases/latest)
-- The latest release of [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
+- [Seedminer](seedminer)에서 받은 `movable.sed` 파일
+- 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+- 최신 버전의 [b9stool](https://github.com/zoogie/b9sTool/releases/latest)
+- 최신 버전의 [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
 
 #### 섹션 I - CFW 확인
 
@@ -45,7 +45,7 @@ These instructions are for Taiwanese consoles ONLY (as indicated by a T at the e
 ![]({{ "/images/screenshots/fredtool-root-layout.png" | absolute_url }})
 {: .notice--info}
 
-#### Section III - BannerBomb3
+#### 섹션 III - BannerBomb3
 
 1. Open the [DSIHaxInjector V2](https://jenkins.nelthorya.net/job/DSIHaxInjector%20v2/build?delay=0sec) website on your computer
 1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
@@ -55,8 +55,8 @@ These instructions are for Taiwanese consoles ONLY (as indicated by a T at the e
 1. Click the "output_(name).zip" link
 1. SD 카드의 `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 폴더로 이동해 주세요 
     +  `<ID0>` is the same as the one you used in Seedminer
-    + `<ID1>` is a 32-character folder inside of `<ID0>`
-    + If the `Nintendo DSiWare` folder does not exist, then create it
+    + 이 `<ID1>`은 `<ID0>` 폴더 안에 존재하는 32자리의 이름을 갖춘 폴더입니다
+    + 만약 `Nintendo DSiWare` 폴더가 존재하지 않다면, 만들어 주세요
 1. If there is anything currently in the `Nintendo DSiWare` folder, move it elsewhere for safekeeping
 1. Open the output_(name) `.zip` file and navigate to `China_Taiwan` -> `output_setup`
 1. Copy all six `.bin` files to the `Nintendo DSiWare` folder
@@ -80,7 +80,7 @@ These instructions are for Taiwanese consoles ONLY (as indicated by a T at the e
 1. SD 카드의 `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 폴더로 이동해 주세요 
 1. Delete all of the `.bin` files in the `Nintendo DSiWare` folder
 
-#### Section IV - Fredtool
+##### 섹션 IV - Fredtool
 
 1. Open the [DSIHaxInjector_new](https://jenkins.nelthorya.net/job/DSIHaxInjector_new/build?delay=0sec) website on your computer
 1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
@@ -97,14 +97,14 @@ These instructions are for Taiwanese consoles ONLY (as indicated by a T at the e
 1. 기기를 시작해 주세요.
 1. 기기에서 본체 설정을 열어 주세요
 1. `데이터 관리` -> `DSiWare` 메뉴를 열어 주세요
-1. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
-1. Select “Copy”, then select “OK”
-1. Exit System Settings
+1. "SD 카드" 섹션에서 "Haxxxxxxxxx!" 타이틀을 선택해 주세요
+1. "Copy"를 선택한 후 "OK"를 선택해 주세요
+1. 본체 설정을 종료해 주세요
 1. Launch Download Play on your device (the orange icon with a 3DS on it)
 1. "Nintendo DS"를 선택해 주세요 
-1. If the exploit was successful, your 3DS will have loaded into the JPN version of Flipnote Studio
+1. 만약 익스플로잇이 성공적이었다면, 기기는 JPN 버전의 Flipnote Studio를 실행할 겁니다
 
-#### Section V - Flipnote Exploit
+#### 섹션 V - Flipnote 익스플로잇
 
 만약 이 섹션의 비주얼 가이드를 선호한다면, [여기서] (https://zoogie.github.io/web/flipnote_directions/) 그 중 하나를 보실 수가 있습니다.
 {: .notice--info}
@@ -121,16 +121,16 @@ These instructions are for Taiwanese consoles ONLY (as indicated by a T at the e
 1. "A"가 들어가 있는 네 번째 버튼을 눌러 주세요
 1. 익스플로잇이 성공적이었다면 b9sTool을 실행했을 것입니다
 1. Using the D-Pad, move to “Install boot9strap”
-    + If you miss this step, the system will exit to home menu instead of installing boot9strap and you will need to open DS Download Play and start over from the beginning of this section
-1. Press (A), then press START and SELECT at the same time to begin the process
-1. Once completed and the bottom screen says “done.”, exit b9sTool, then power off your device
+    + 이 댄계을 놓쳤다면, 시스템은 boot9strap을 설치하는 대신 HOME 메뉴로 나갈 것이고, 다시 DS 다운로드 플레이를 열어서 섹션 V의 처음부터 시작해야 할 것입니다
+1. (A) 버튼을 누른 후, START와 SELECT를 동시에 눌러 작업을 실행해 주세요
+1. 완료되고 아래 화면에 "done."이라고 표시되면, b9sTool를 종료하고 기기의 전원을 꺼 주세요
     + 전원버튼을 계속 눌러 강제종료를 해야 할 수도 있습니다
-    + If you see the Luma Configuration screen, continue with the guide without powering off
+    + Luma3DS 설정 메뉴가 표시되면, 전원을 끄지 말고 그냥 진행해 주세요
 
-#### Section VI - Configuring Luma3DS
+#### 섹션 VI - Luma3DS 설정
 
 1. (Select) 를 누른 채 기기를 부팅해 LumaDS 설정 메뉴로 들어가 주세요
-    + If you encounter issues launching the Luma configuration menu, follow [this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+    + 만약 Luma3DS 설정 메뉴가 표시 안되면, [이 문제 해결 가이드 (영어)](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)를 참고해 주시기 바랍니다
     + If the blue light on your 3DS powers on and off, you are missing `boot.firm` from the root of your SD card
 1. (A) 버튼과 십자 패드을 이용해 다음 설정을 설정해 주세요:
     + “Show NAND or user string in System Settings”
@@ -146,9 +146,9 @@ These instructions are for Taiwanese consoles ONLY (as indicated by a T at the e
 1. 기기를 시작해 주세요.
 1. 기기에서 본체 설정을 열어 주세요
 1. `데이터 관리` -> `DSiWare` 메뉴를 열어 주세요
-1. Under the “SD Card” section, select the “Haxxxxxxxxx!” title
-1. Select “Copy”, then select “OK”
-1. Exit System Settings
+1. "SD 카드" 섹션에서 "Haxxxxxxxxx!" 타이틀을 선택해 주세요
+1. "Copy"를 선택한 후 "OK"를 선택해 주세요
+1. 본체 설정을 종료해 주세요
 1. 기기를 종료해 주세요
 
 ___
diff --git a/_pages/ko_KR/bannerbomb3.txt b/_pages/ko_KR/bannerbomb3.txt
index 610712a187..0bac59b2d6 100644
--- a/_pages/ko_KR/bannerbomb3.txt
+++ b/_pages/ko_KR/bannerbomb3.txt
@@ -12,7 +12,7 @@ title: "BannerBomb3"
 
 이 설명서는 미주, 유럽, 일본, 그리고 한국 지역 기기들 (시스템 버전 다음 글짜가 U, E, J, 아니면 K 인 경우) 와 호환됩니다.
 
-If you have a Taiwanese console (indicated by a T after the system version), follow [this page](bannerbomb3-fredtool-(twn)) instead.
+만약 대만 지역 (TWN, 버전 끝에 T 글자가 표시됨)기기를 소유하고 계시다면, [이 페이지](bannerbomb3-fredtool-(twn))를 진행해 주시기 바랍니다.
 {: ..notice--warning}
 
 ### 준비물
diff --git a/_pages/ko_KR/installing-boot9strap-(fredtool).txt b/_pages/ko_KR/installing-boot9strap-(fredtool).txt
index 17618b43f6..59fbc5203c 100644
--- a/_pages/ko_KR/installing-boot9strap-(fredtool).txt
+++ b/_pages/ko_KR/installing-boot9strap-(fredtool).txt
@@ -83,15 +83,15 @@ title: "boot9strap 설치 (Fredtool)"
 1. 익스플로잇이 성공적이었다면 b9sTool을 실행했을 것입니다
 1. 십자 패드를 사용해서, "Install boot9strap"으로 이동해 주세요.
   + 이 스텝을 놓쳤다면, 시스템은 boot9strap을 설치하는 대신 HOME 메뉴로 나갈 것이고, 다시 DS 소프트웨어용 설정을 열어서 섹션 III의 처음부터 시작해야 할 것입니다
-1. Press (A), then press START and SELECT at the same time to begin the process
-1. Once completed and the bottom screen says "done.", exit b9sTool, then power off your device
+1. (A) 버튼을 누른 후, START와 SELECT를 동시에 눌러 작업을 실행해 주세요
+1. 완료되고 아래 화면에 "done."이라고 표시되면, b9sTool를 종료하고 기기의 전원을 꺼 주세요
   + 전원버튼을 계속 눌러 강제종료를 해야 할 수도 있습니다
-  + If you see the Luma Configuration screen, continue with the guide without powering off
+  + Luma3DS 설정 메뉴가 표시되면, 전원을 끄지 말고 그냥 진행해 주세요
 
 #### 섹션 V - Luma3DS 설정
 
 1. (Select) 를 누른 채 기기를 부팅해 LumaDS 설정 메뉴로 들어가 주세요
-  + If you encounter issues launching the Luma configuration menu, [follow this troubleshooting guide](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)
+  + 만약 Luma3DS 설정 메뉴가 표시 안되면, [이 문제 해결 가이드 (영어)](https://github.com/zoogie/b9sTool/blob/master/TROUBLESHOOTING.md)를 참고해 주시기 바랍니다
 1. (A) 버튼과 십자 패드을 이용해 다음 설정을 설정해 주세요:
   + **"Show NAND or user string in System Settings"**
 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요
diff --git a/_pages/ko_KR/installing-boot9strap-(hardmod).txt b/_pages/ko_KR/installing-boot9strap-(hardmod).txt
index bb2bebc1c4..b3abac89d1 100644
--- a/_pages/ko_KR/installing-boot9strap-(hardmod).txt
+++ b/_pages/ko_KR/installing-boot9strap-(hardmod).txt
@@ -91,7 +91,7 @@ title: "boot9strap 설치 (하드모드)"
 1. (A) 버튼과 십자 패드을 이용해 다음 설정을 설정해 주세요:
   + **"Show NAND or user string in System Settings"**
 1. (Start)를 눌러 저장하고 기기를 다시 시작해 주세요
-  + If you get an error, just continue to the next page
+  + 만약 오류가 나더라도 그냥 다음으로 넘어가 주세요
 
 이제 기기는 SD 카드가 삽입되 있는 한 Luma3DS를 기본으로 부팅 됩니다.
   + Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다.
diff --git a/_pages/ko_KR/region-changing.txt b/_pages/ko_KR/region-changing.txt
index 3b9760d83e..870002fab1 100644
--- a/_pages/ko_KR/region-changing.txt
+++ b/_pages/ko_KR/region-changing.txt
@@ -8,7 +8,7 @@ title: "지역 변경"
 
 이 페이지는 CFW SysNAND의 지역을 변경하는 방법을 안내하는 부가 섹션입니다. 이 작업은 바꾸고자 하는 지역의 11.15.0 CTRTransfer 이미지를 설치합니다.
 
-Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)을 지원하기 때문에, 지역 변경은 거의 불필요하다는 점을 참고해 주시기 바랍니다. Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Luma3DS가 지역 외 게임들과 [타이틀별 지역 에뮬레이션](https://github.com/LumaTeam/Luma3DS/wiki/Optional-features)을 지원하기 때문에, 지역 변경은 거의 불필요하다는 점을 참고해 주시기 바랍니다. 또한, 다른 지역의 NDS게임을 실행하는 것 또한 [TWiLight Menu++](https://github.com/DS-Homebrew/TWiLightMenu/releases)에 의해 지원됩니다.
 
 만약 여러분의 SD 카드의 `/luma/payloads/` 폴더에 `GodMode9.firm` 외의 페이로드 파일이 있다면, (Start)를 누르면서 부팅할 시에 화면에 표시되는 "chainloader menu" 에서 십자 패드와 (A) 버튼으로 조작하여 "GodMode9"을 선택하여야 합니다.
 
diff --git a/_pages/ko_KR/restoring-updating-cfw.txt b/_pages/ko_KR/restoring-updating-cfw.txt
index 2e47f5bd9e..a1a413e664 100644
--- a/_pages/ko_KR/restoring-updating-cfw.txt
+++ b/_pages/ko_KR/restoring-updating-cfw.txt
@@ -8,7 +8,7 @@ title: "CFW 복구 / 업데이트"
 
 이 문서는 boot9strap이 설치되어 있는 기기의 커스텀 펌웨어 소프트웨어 업데이트 또는 재설치를 준비하기 위한 문서입니다. 만약 SD 카드가 없어지거나 데이터가 손상 되어도 이 작업을 하면 됩니다.
 
-Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS will be unable to recognize it. If your SD card is not yet properly formatted, use one of these pages to format it, depending on your operating system: [Windows](formatting-sd-(windows)), [Mac](formatting-sd-(mac)), [Linux](formatting-sd-(linux)).
+이 작업은 FAT32로 포멧 된 SD 카드가 필요합니다. 이가 없으면 3DS가 인식을 못합니다. SD 카드가 포멧이 안되있으면, 다음 페이지 중 OS에 맞는 작업을 해 주시기 바랍니다: [Windows](formatting-sd-(windows)), [Mac](formatting-sd-(mac)), [Linux](formatting-sd-(linux)).
 
 ### 준비물
 *최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
@@ -19,16 +19,16 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
 #### 섹션 I - 준비 작업
 
 1. SD 카드를 컴퓨터에 삽입해 주세요
-1. Copy `boot.3dsx` and `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+1. Luma3DS `.zip`안에 있는 `boot.3dsx`과 `boot.firm`를 SD 카드의 루트에 복사해 주세요. 이미 존재하는 파일을 덮어쓰기 해 주세요
   + SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 않 들어가 있는 상태의 폴더 입니다
 1. GodMode9 `.zip`안에 압축되있는 `GodMode9.firm` 파일을 SD 카드의 `/luma/payloads/`폴더에 복사해 주세요. 만약 이미 파일이 존재하면 덮어씌워 주세요
   + 'luma' 또는 'payloads' 폴더가 없다면, 만들어 주세요
-1. Copy the `gm9` folder from the GodMode9 `.zip` to the root of your SD card, merging it with any existing folder and replacing any existing files
+1. GodMode9 `.zip`안에 압축되있는 `gm9` 폴더를 SD 카드의 루트에 복사해 주세요. 만약 이미 폴더 밎 파일이 존재하면 덮어씌워 주세요
 1. SD 카드를 기기에 다시 삽입해 주세요
 
 #### 섹션 II - Luma3DS 설정
 
-1. Press and hold (Select), and while holding (Select), power on your device
+1. (Select) 를 길게 누르고, 이 상태에서 전원을 켜 주세요
 	* 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다
 1. (A) 버튼과 십자 패드을 이용해 다음 설정을 설정해 주세요:
 	* **"Show NAND or user string in System Settings"**
@@ -38,7 +38,7 @@ Your SD card must be formatted as FAT32 to follow this guide, or else the 3DS wi
 
 1. 기기를 종료해 주세요
 1. (Start) 를 길게 누르고, 이 상태에서 전원을 켜 주세요. GodMode9이 실행 될 겁니다
-  + If you do not boot into GodMode9, ensure that GodMode9.firm is in `/luma/payloads/` and that `payloads` is correctly spelled
+  + 만약 GodMode9이 실행되지 않을 경우, `GodMode9.firm`이 `/luma/payloads/` 에 존재를 확인하고, `payloads`가 정확히 쓰여 있음을 확인해 주시기 바랍니다
 1. 만약 "RTC date&time seems to be wrong" 메세지가 표시되면 (A) 버튼을 눌러 하고, 날짜와 시간을 고친 다음 (A) 버튼을 눌러 계속해 주세요
 1. (Home)을 눌러 작업 메뉴를 열어 주세요
 1. "Scripts..."를 선택해 주세요
diff --git a/_pages/ko_KR/seedminer.txt b/_pages/ko_KR/seedminer.txt
index c55c4e6b5f..81704556b0 100644
--- a/_pages/ko_KR/seedminer.txt
+++ b/_pages/ko_KR/seedminer.txt
@@ -73,16 +73,16 @@ ___
 
 더 깊은 모딩을 위한 Seedminer의 이 사용법은, 모든 3DS 기기에 존제하는 SAFE_MODE 펌웨어의 익스플로잇을 사용하는 방식입니다.
 
-This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
+이 작업은 PicHaxx + universal-otherapp를 진행하기 불가능한 상황에만 권장합니다 (예: e숍 사용 불가, 또는 KOR 지역 3DS)
 
 [boot9strap 설치 (USM)](installing-boot9strap-(usm))로 계속합니다
 {: .notice--warning}
 
 ___
 
-#### Taiwan consoles only
+#### 대만 (TWN) 기기
 
-If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Other regions may not follow this route.**
+만약 대만 (TWN) 지역 기기 (시스템 버전 끝에 T가 표시됨, 예를 들어 11.15.0-39**T**)을 가지고 계시다면 이 작업을 해야 합니다. **나머지 지역 기기들은 따르면 않됩니다.**
 
-Continue to [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn))
+[BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn))로 계속합니다
 {: .notice--warning}
\ No newline at end of file
diff --git a/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt b/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt
index 94e735b442..8f590596aa 100644
--- a/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/nl_NL/bannerbomb3-fredtool-(twn).txt
@@ -8,7 +8,7 @@ title: "BannerBomb3 + Fredtool (TWN)"
 
 Om DSiWare die op het systeem staat te dumpen naar de SD-kaart, maken we gebruik van een fout in het DSiWare Data Management venster van de Settings applicatie.
 
-To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system to dump the DSi Internet Settings application to the SD root.
+Om dit te bereiken, gebruiken we de encryptiesleutel van je systeem (movable.sed) om een DSiWare back-up te maken die het systeem exploiteert om de DSi Internet Settings applicatie naar de hoofdmap van je SD-kaart te dumpen.
 
 Once you have a DSiWare backup, an exploitable DSiWare title can be injected into DS Download Play, which can be used to install custom firmware.
 
@@ -51,15 +51,15 @@ Als je een configuratiemenu ziet, heb je al CFW en zal het doorgaan met deze ins
 1. Under the "Username" field, enter any alphanumeric name (no spaces or special characters)
 1. Under the "MovableSed" field, upload your `movable.sed`using the "Browse..." option
 1. Klik op "Build"
-1. Wait a few seconds, then click "Last build (#number) x sec ago"
-1. Click the "output_(name).zip" link
+1. Wacht een paar seconden en klik dan op "Last build (#number) x sec ago"
+1. Klik op de "output_(name).zip" link
 1. Navigeer naar `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` op je SD-kaart 
-    +  `<ID0>` is the same as the one you used in Seedminer
-    + `<ID1>` is a 32-character folder inside of `<ID0>`
-    + If the `Nintendo DSiWare` folder does not exist, then create it
+    + `<ID0>' is hetzelfde als degene die je hebt gebruikt in Seedminer
+    + `<ID1>` is een reeks van 32 karakters lang en bevindt zich in `<ID0>`
+    + Als de `Nintendo DSiWare` map niet bestaat, maak deze dan aan
 1. If there is anything currently in the `Nintendo DSiWare` folder, move it elsewhere for safekeeping
-1. Open the output_(name) `.zip` file and navigate to `China_Taiwan` -> `output_setup`
-1. Copy all six `.bin` files to the `Nintendo DSiWare` folder
+1. Open het output_(naam) `.zip` bestand en navigeer naar `China_Taiwan` -> `output_setup`
+1. Kopieer alle zes de `.bin` bestanden naar de `Nintendo DSiWare` map
 1. Stop je SD kaart terug in je 3DS
 1. Zet je 3DS aan
 1. Open System Settings op je apparaat
@@ -68,7 +68,7 @@ Als je een configuratiemenu ziet, heb je al CFW en zal het doorgaan met deze ins
 1. Schakel je 3DS uit
 1. Plaats je SD kaart in je computer
 1. Navigeer naar `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` op je SD-kaart 
-1. Open the output_(name) `.zip` file and navigate to `China_Taiwan` -> `output_hax`
+1. Open de output_(naam) `.zip` bestand en navigeer naar `China_Taiwan` -> `output_hax`
 1. Copy the `.bin` file that is the same number as the one that was on the second page of the DSiWare Management menu to the `Nintendo DSiWare` folder, and overwrite when prompted
 1. Zet je 3DS aan
 1. Open System Settings op je apparaat
@@ -89,15 +89,15 @@ Als je een configuratiemenu ziet, heb je al CFW en zal het doorgaan met deze ins
 1. Under the "MovableSed" field, upload your `movable.sed` file using the second "Browse..." option
 1. Under the "InjectionTarget" field, set the injection target to `DSdownloadplay`(NOT memorypit)
 1. Klik op "Build"
-1. Wait a few seconds, then click "Last build (#number) x sec ago"
-1. Click the "output_(name).zip" link
+1. Wacht een paar seconden en klik dan op "Last build (#number) x sec ago"
+1. Klik op de "output_(name).zip" link
 1. Navigeer naar `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` op je SD-kaart 
 1. Copy the `484E4441.bin`  file from the `hax` folder of the downloaded DSiWare archive (output_(name).zip) to the `Nintendo DSiWare` folder
 1. Stop je SD kaart terug in je 3DS
 1. Zet je 3DS aan
 1. Open System Settings op je apparaat
 1. Navigeer naar `Data Management` -> `DSiWare`
-1. Onder het "SD-kaart" gedeelte selecteer de titel "Haxxxxxxxxx!"
+1. Onder het "SD Card" gedeelte selecteer de titel "Haxxxxxxxxx!"
 1. Selecteer "Copy" en selecteer dan "OK”
 1. Verlaat Systeeminstellingen
 1. Launch Download Play on your device (the orange icon with a 3DS on it)
@@ -146,7 +146,7 @@ Als je liever een visuele handleiding hebt in dit deel, is er [hier](https://zoo
 1. Zet je 3DS aan
 1. Open System Settings op je apparaat
 1. Navigeer naar `Data Management` -> `DSiWare`
-1. Onder het "SD-kaart" gedeelte selecteer de titel "Haxxxxxxxxx!"
+1. Onder het "SD Card" gedeelte selecteer de titel "Haxxxxxxxxx!"
 1. Selecteer "Copy" en selecteer dan "OK”
 1. Verlaat Systeeminstellingen
 1. Schakel je 3DS uit
diff --git a/_pages/nl_NL/move-emunand.txt b/_pages/nl_NL/move-emunand.txt
index 59481445ff..e254511ac1 100644
--- a/_pages/nl_NL/move-emunand.txt
+++ b/_pages/nl_NL/move-emunand.txt
@@ -164,7 +164,7 @@ To identify a `<TitleID>.gbavc.sav` file's Title ID, you can get a listing of al
 1. Houd (R) en (B) gelijkertijd ingedrukt om je SD kaart uit te werpen
 1. Plaats je SD kaart in je computer
 1. Kopieer alle bestanden terug naar je SD kaart
-  + Ensure you replace the `boot.firm` file on your SD card with the one from your backup
+  + Zorg ervoor dat je het `boot.firm` bestand op je SD-kaart vervangt met degene uit je backup
 1. Stop je SD kaart terug in je 3DS
 1. Druk (A) om je SD kaart te remounten
 1. Druk op (Start) om te herstarten
diff --git a/_pages/nl_NL/seedminer.txt b/_pages/nl_NL/seedminer.txt
index ba78aa3d80..f8741c5b1d 100644
--- a/_pages/nl_NL/seedminer.txt
+++ b/_pages/nl_NL/seedminer.txt
@@ -73,7 +73,7 @@ Ga verder naar [boot9strap installeren (PicHaxx)](installing-boot9strap-(pichaxx
 
 Deze methode om Seedminer te gebruiken voor verdere exploitatie maakt gebruik van je `movable.sed` bestand om te profiteren van exploits in de SAFE_MODE firmware aanwezig in alle 3DS consoles.
 
-This route is only recommended if you are for some reason unable to follow the PicHaxx + universal-otherapp route, such as lack of eShop access or using a Korean 3DS.
+Deze route wordt alleen aanbevolen als je om een of andere reden de PicHaxx + universal-otherapp route niet kunt volgen, dit kan door een gebrek aan toegang tot de eShop of als je een Koreaanse 3DS hebt.
 
 Ga verder naar [boot9strap installeren (USM)](installing-boot9strap-(usm))
 {: .notice--warning}
@@ -82,7 +82,7 @@ ___
 
 #### Enkel voor Taiwanese consoles
 
-If you have a Taiwanese device (indicated with a T at the end of the system version, such as 11.15.0-39**T**), you must follow this route. **Andere regio's mogen deze route niet volgen.**
+Als je een Taiwanees apparaat hebt (aangegeven met een T aan het einde van de systeemversie, zoals 11.15.0-39**T**), dan moet je deze route volgen. **Andere regio's mogen deze route niet volgen.**
 
 Ga verder naar [BannerBomb3 + Fredtool (TWN)](bannerbomb3-fredtool-(twn))
 {: .notice--warning}
\ No newline at end of file
diff --git a/_pages/nl_NL/site-navigation.txt b/_pages/nl_NL/site-navigation.txt
index 2b67e04311..38972dae1f 100644
--- a/_pages/nl_NL/site-navigation.txt
+++ b/_pages/nl_NL/site-navigation.txt
@@ -7,7 +7,7 @@ sitemap: false
 ** Aanbevolen **
 
 + [Installatie Voltooien](finalizing-setup)
-+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
++ [Boot9strap installeren (Soundhax)](installing-boot9strap-(soundhax))
 + [Seedminer](seedminer)
 
 {% endcapture %}
@@ -23,7 +23,7 @@ sitemap: false
 + [Controleren op CFW](checking-for-cfw)
 + [Bijdragen](contribute)
 + [CTRTransfer](ctrtransfer)
-+ [Dumping Titles and Game Cartridges](dumping-titles-and-game-cartridges)
++ [Titels en game cartridges dumpen](dumping-titles-and-game-cartridges)
 + [F3 (Linux)](f3-(linux))
 + [F3X (Mac)](f3x-(mac))
 + [F3XSwift (Mac)](f3xswift-(mac))
@@ -32,8 +32,8 @@ sitemap: false
 + [Installatie Voltooien](finalizing-setup)
 + [Ntrboot flashen (een 3DS systeem)](flashing-ntrboot-(3ds-single-system))
 + [Ntrboot flashen (meerdere 3DS systemen)](flashing-ntrboot-(3ds-multi-system))
-+ [Flashing ntrboot (DSi)](flashing-ntrboot-(dsi))
-+ [Flashing ntrboot (NDS)](flashing-ntrboot-(nds))
++ [ntrboot flashen (DSi)](flashing-ntrboot-(dsi))
++ [Ntrboot flashen (NDS)](flashing-ntrboot-(nds))
 + [SD-kaart formatteren (Linux)](formatting-sd-(linux))
 + [SD-kaart formatteren (Mac)](formatting-sd-(mac))
 + [SD-kaart formatteren (Windows)](formatting-sd-(windows))
@@ -56,7 +56,7 @@ sitemap: false
 + [CFW herstellen / bijwerken](restoring-updating-cfw)
 + [Seedminer](seedminer)
 [Probleemoplossing](troubleshooting)
-+ [Uninstall CFW](uninstall-cfw)
-+ [Updating B9S](updating-b9s)
++ [CFW verwijderen](uninstall-cfw)
++ [B9S updaten](updating-b9s)
 {% endcapture %}
 <div class="notice--primary">{{ notice-2 | markdownify }}</div>
diff --git a/_pages/nl_NL/troubleshooting.txt b/_pages/nl_NL/troubleshooting.txt
index cdab93eab7..7357cba269 100644
--- a/_pages/nl_NL/troubleshooting.txt
+++ b/_pages/nl_NL/troubleshooting.txt
@@ -4,11 +4,11 @@ title: "Probleemoplossing"
 
 {% include toc title="Inhoudsopgave"%}
 
-This page offers troubleshooting advice for commonly encountered issues. If you are unable to solve your issue with the advice on this page, please join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and describe your issue, including what you have already tried.
+Deze pagina biedt advies voor het oplossen van problemen die algemeen zijn ondervonden. Als je je probleem niet kunt oplossen met het advies op deze pagina, neem dan deel aan [Nintendo Homebrew op Discord](https://discord.gg/MWxPgEp) en beschrijf je probleem, inclusief wat je al hebt geprobeerd.
 
 ---
 
-## Issues with SafeB9SInstaller
+## Problemen met SafeB9SInstaller
 
 ### SigHaxed FIRM was not installed! Kijk naar het onderste scherm voor meer informatie.
 
@@ -39,7 +39,7 @@ Sluit je aan bij [Nintendo Homebrew op Discord](https://discord.gg/MWxPgEp) voor
 
 Dit gebeurt wanneer je je SD-kaart in meerdere 3DS systemen gebruikt en is bedoeld om te voorkomen dat je per ongeluk gegevens samenvoegt die niet geldig zouden zijn op een ander apparaat. To figure out which long folder name is correct for your 3DS, follow these instructions:
 
-1. Rename the `Nintendo 3DS` folder to `BACKUP_Nintendo 3DS`
+1. Hernoem de `Nintendo 3DS` map naar `BACKUP_Nintendo 3DS`
 1. Stop je SD-kaart terug in je 3DS en zet je 3DS aan
 1. Wait for the device to generate the SD card data
 	+ Your applications will have disappeared. This is normal and will be resolved shortly
@@ -341,7 +341,7 @@ This can occur after a CTRTransfer or region change on Old 3DS / 2DS. You will n
 
 ## Other troubleshooting
 
-### Clear HOME Menu extdata
+### Wis HOME Menu extdata
 
 1. Schakel je 3DS uit
 1. Plaats je SD kaart in je computer
diff --git a/_pages/nl_NL/uninstall-cfw.txt b/_pages/nl_NL/uninstall-cfw.txt
index 5d5b11965a..7c4308eca5 100644
--- a/_pages/nl_NL/uninstall-cfw.txt
+++ b/_pages/nl_NL/uninstall-cfw.txt
@@ -13,10 +13,10 @@ Dit is nooit de oplossing om problemen op te lossen die je mogelijks tegenkomt m
 
 Alle niet-getekende (onwettige) games zullen onbruikbaar worden en zullen handmatig moeten worden verwijderd alvorens dit process te beginnen door de Data Management optie te gebruiken in System Settings. Gebruik een [save manager](https://github.com/FlagBrew/Checkpoint/releases/latest) om de saves van deze niet-gesigneerde (illegale) games te back-uppen.
 
-If you have modified critical system software (such as editing the HOME Menu, unbanning your console, region changing, etc.), uninstalling CFW WILL BRICK your device! Zorg ervoor da je alle secties van deze pagina volgt.
+Als je kritische systeem software hebt gewijzigd (zoals het bewerken van het HOME Menu, het unbannen van je console, het veranderen van de regio, enz.), zal het verwijderen van CFW JE APPARAAT BRICKEN! Zorg ervoor da je alle secties van deze pagina volgt.
 {: .notice--danger}
 
-These instructions will only work on devices with a Luma3DS version of 8.0 or higher. If you have an older version of Luma, you must upgrade your setup before following these instructions. Follow [this page](checking-for-cfw) to find your upgrade instructions.
+Deze instructies werken alleen op apparaten met een Luma3DS versie van 8.0 of hoger. Als je een oudere versie van Luma heeft, moet je de setup upgraden voordat je deze instructies kunt volgen. Volg [deze pagina](checking-for-cfw) om je upgrade instructies te vinden.
 {: .notice--warning}
 
 Merk op dat als je andere payload bestanden dan `GodMode9.firm` in de `/luma/payloads/` map op je SD-kaart hebt, je bij het ingedrukt houden van (Start) bij het opstarten een "chainloader menu" opent die je kan navigeren met de D-Pad en met de (A) knop "GodMode9" kaHin selecteren. Dit geld voor al deze instructies. 
@@ -51,7 +51,7 @@ The purpose of this section is to check whether built-in DS mode applications wi
   + If your console displays the Japanese version of Flipnote Studio, a black screen, or an error message, the test has failed
 1. Schakel je 3DS uit
 
-##### DS Download Play Test
+##### DS Download Play test
 1. Zet je 3DS aan
 1. Start de Download Play applicatie (![]({{ "/images/download-play-icon.png" | absolute_url }}){: height="24px" width="24px"})
 1. Selecteer "Nintendo DS"
@@ -80,11 +80,11 @@ The purpose of this section is to verify that the console will boot and that cri
 1. Selecteer "Other Settings"
 1. Selecteer "Profile"
 1. Selecteer "User Name"
-1. If you are able to enter a new user name, the test was successful
-	+ If the keyboard does not appear, the screen freezes, or the console crashes, the test has failed
+1. Als je een nieuwe gebruikersnaam kunt invoeren, dan was de test succesvol
+	+ Als het toetsenbord niet verschijnt, het scherm bevriest, of de console crasht, is de test mislukt
 1. Schakel je 3DS uit
 
-Als je NIET opstart in het normale 3DS HOME Menu, of System Setting / je toetsenbord is niet toegankelijk, **ga NIET verder met deze instructies**! Join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you.
+Als je NIET opstart in het normale 3DS HOME Menu, of System Setting / je toetsenbord is niet toegankelijk, **ga NIET verder met deze instructies**! Je zou de [Nintendo Homebrew Discord](https://discord.gg/MWxPgEp) moeten joinen en in het Engels vragen of iemand je kan helpen.
 {: .notice--danger}  
 
 #### Deel IV - NAND back-up
@@ -104,7 +104,7 @@ Als je NIET opstart in het normale 3DS HOME Menu, of System Setting / je toetsen
 1. Selecteer "Poweroff system" om je 3DS uit te zetten
 
 #### Deel V - Verwijderen van onwettige inhoud
-This section will remove illegitimate content, like homebrew and dumped cartridges. If you have save data that you care about, back it up with a save manager before continuing!
+Dit deel zal onwettige inhoud verwijderen, zoals homebrew en gedumpte cartridges. Als je gegevens hebt waar je om geeft, zoals gamesaves, maak dan een backup met een save manager voordat je doorgaat!
 {: .notice--warning}
 
 1. Zet je 3DS aan
diff --git a/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt b/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt
index 7825dcf7a2..c1c5e4679a 100644
--- a/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt
+++ b/_pages/zh_CN/bannerbomb3-fredtool-(twn).txt
@@ -12,7 +12,7 @@ title: "BannerBomb3 + Fredtool（仅港台版）"
 
 一旦你得到了 DSiWare 备份，我们将把一个写入了漏洞的 DSiWare 程序注入到“DS 下载通信”程序中，用来安装自制固件。
 
-这些操作*仅限*港台版主机使用！（系统版本号末尾为 T ，如 11.15.0-39T） 如果你的主机不是这个区域的，则请使用[其他的方法](seedminer#下一步)。
+这些操作**仅限**港台版主机使用！（系统版本号末尾为 T ，如 11.15.0-39T） 如果你的主机不是这个区域的，则请使用[其他的方法](seedminer#下一步)。
 {: .notice--warning}
 
 ### 你需要准备点啥？
@@ -62,8 +62,8 @@ title: "BannerBomb3 + Fredtool（仅港台版）"
 1. 将六个 `.bin` 文件复制到 `Nintendo DSiWare` 文件夹中
 1. 将SD卡重新插入你的主机
 1. 启动你的主机
-1. 启动你主机上的 “系统设置(System settings)”
-1. 进入至 `数据管理` -> `DSiWare` -> `SD 卡` -> （第二页）
+1. 启动你主机上的 “主機設定”
+1. 进入至 `資料管理` -> `DSiWare` -> `SD 卡` -> （第二页）
 1. 注意第二页列出的 DSiWare 应用上的标号（在 1 和 6 之间）
 1. 将主机关机
 1. 将你的 SD 卡插入到电脑
@@ -71,11 +71,11 @@ title: "BannerBomb3 + Fredtool（仅港台版）"
 1. 打开 output_(<你的名字>) `.zip`，然后进入到 `China_Taiwan` -> `output_hax`
 1. 从中复制出你在 DSiWare 数据管理第二页中看到的与标号相同的文件，然后复制到 `Nintendo DSiWare` 文件夹。如有提示请选覆盖。
 1. 启动你的主机
-1. 启动你主机上的 “系统设置(System settings)”
-1. 进入至 `数据管理` -> `DSiWare` -> `SD 卡`
+1. 启动你主机上的 “主機設定”
+1. 进入至 `資料管理` -> `DSiWare` -> `SD 卡`
 1. 稍等一下
      + 这时应该会发生以下情况：闪过一段进度，随后主机卡住，下屏变紫，音乐自动停止，然后主机会显示一条错误信息并要求重启
-    + 如果下屏没有变紫，则代表出错了
+    + 如果下屏没有变紫，则代表之前的步骤可能做错了
 1. 现在 SD 卡上的根目录会多出一个 `42383821.bin` 文件
 1. 打开内存卡的 `Nintendo 3DS` -> `<ID0>` -> `<ID1>` -> `Nintendo DSiWare` 文件夹 
 1. 删除 `Nintendo DSiWare` 文件夹中的所有 `.bin` 文件
@@ -95,8 +95,8 @@ title: "BannerBomb3 + Fredtool（仅港台版）"
 1. 从下载的 DSiWare 压缩包 （`output_(<你的名字>).zip`） 里的 `hax` 文件夹复制 `484E4441.bin` 到 `Nintendo DSiWare` 文件夹
 1. 将SD卡重新插入你的主机
 1. 启动你的主机
-1. 启动你主机上的 “系统设置(System settings)”
-1. 进入到 `数据管理(Data Management)` -> `DSiWare`
+1. 启动你主机上的 “主機設定”
+1. 进入到 `資料管理` -> `DSiWare`
 1. 在 “SD 卡” 一栏，选择 “Haxxxxxxxxx!”
 1. 选择 “复制” ，然后选择 “OK”
 1. 退出系统设置
@@ -136,7 +136,7 @@ title: "BannerBomb3 + Fredtool（仅港台版）"
     + “Show NAND or user string in System Settings”
 1. 按下 “Start” 键保存设置并重启
 
-#### 第七步 – 还原“DS下载通信”程序
+#### 第七步 – 还原“DS下载遊戲”程序
 
 1. 将主机关机
 1. 将你的 SD 卡插入到电脑
@@ -144,8 +144,8 @@ title: "BannerBomb3 + Fredtool（仅港台版）"
 1. 下载的 DSiWare 压缩包 （`fredtool.zip`） 里的 `clean` 文件夹复制 `484E4441.bin` 到 `Nintendo DSiWare` 文件夹
 1. 将SD卡重新插入你的主机
 1. 启动你的主机
-1. 启动你主机上的 “系统设置(System settings)”
-1. 进入到 `数据管理(Data Management)` -> `DSiWare`
+1. 启动你主机上的 “主機設定”
+1. 进入到 `資料管理` -> `DSiWare`
 1. 在 “SD 卡” 一栏，选择 “Haxxxxxxxxx!”
 1. 选择 “复制” ，然后选择 “OK”
 1. 退出系统设置
diff --git a/_pages/zh_CN/bannerbomb3.txt b/_pages/zh_CN/bannerbomb3.txt
index 955763d49a..d7758aea33 100644
--- a/_pages/zh_CN/bannerbomb3.txt
+++ b/_pages/zh_CN/bannerbomb3.txt
@@ -40,7 +40,7 @@ title: "BannerBomb3"
 1. 将 SD 卡重新插入你的主机
 1. 启动你的主机
 1. 启动你主机上的 “系统设置(System settings)”
-1. 进入到 `数据管理(Data Management)` -> `DSiWare`
+1. Navigate to `Data Management` -> `DSiWare`
 1. 点击 SD 卡部分
   + 你的主机屏幕应该会开始品红色（粉色 / 紫色）的闪烁，然后在几秒钟后崩溃。 这意味着它生效了
 1. 将主机关机
diff --git a/_pages/zh_CN/installing-boot9strap-(fredtool).txt b/_pages/zh_CN/installing-boot9strap-(fredtool).txt
index f663b2b95b..05fcd257e5 100644
--- a/_pages/zh_CN/installing-boot9strap-(fredtool).txt
+++ b/_pages/zh_CN/installing-boot9strap-(fredtool).txt
@@ -58,7 +58,7 @@ title: "安装 Boot9strap（通过 Fredtool）"
 1. 将 SD 卡重新插入你的主机
 1. 启动你的主机
 1. 启动你主机上的 “系统设置(System settings)”
-1. 进入到 `数据管理(Data Management)` -> `DSiWare`
+1. Navigate to `Data Management` -> `DSiWare`
 1. 在 “SD Card” 一栏，选择 “Haxxxxxxxxx!” 应用
 1. 选择 “Copy” ，然后选择 “OK”
 1. 返回系统设置的主菜单
@@ -109,7 +109,7 @@ title: "安装 Boot9strap（通过 Fredtool）"
 1. 将SD卡重新插入你的主机
 1. 启动你的主机
 1. 启动你主机上的 “系统设置(System settings)”
-1. 进入到 `数据管理(Data Management)` -> `DSiWare`
+1. Navigate to `Data Management` -> `DSiWare`
 1. 在 “SD卡(SD Card)” 一栏，选择 “Nintendo DSi™” 应用
 1. 选择 “Copy” ，然后选择 “OK”
 
diff --git a/_pages/zh_CN/installing-boot9strap-(usm).txt b/_pages/zh_CN/installing-boot9strap-(usm).txt
index 3ebbde3b1e..c42157fe77 100644
--- a/_pages/zh_CN/installing-boot9strap-(usm).txt
+++ b/_pages/zh_CN/installing-boot9strap-(usm).txt
@@ -54,7 +54,7 @@ title: "安装 boot9strap（通过 USM）"
 1. 将SD卡重新插入你的主机
 1. 启动你的主机
 1. 启动你主机上的 “系统设置(System settings)”
-1. 进入到 `数据管理(Data Management)` -> `DSiWare`
+1. Navigate to `Data Management` -> `DSiWare`
 1. 点击 SD 卡部分
   + 主机应该会显示一个菜单
 1. 选择 “Inject haxx”
@@ -89,7 +89,7 @@ title: "安装 boot9strap（通过 USM）"
 #### 第五步 – 还原 WiFi 配置文件
 
 1. 启动你主机上的 “系统设置(System settings)”
-1. 进入到 `数据管理(Data Management)` -> `DSiWare`
+1. Navigate to `Data Management` -> `DSiWare`
 1. 点击 SD 卡部分
   + 你的主机应该会显示一个菜单
 1. 选择 “Restore slots”
diff --git a/_pages/zh_CN/restoring-updating-cfw.txt b/_pages/zh_CN/restoring-updating-cfw.txt
index 9b4c0165e5..ac6c9c535e 100644
--- a/_pages/zh_CN/restoring-updating-cfw.txt
+++ b/_pages/zh_CN/restoring-updating-cfw.txt
@@ -8,7 +8,7 @@ title: "更新/恢复自制固件"
 
 此页面的内容将指导你为已安装最新 boot9strap 固件的主机进行重新安装或升级自制固件应用程序。 当 SD 卡由于意外损坏或丢失时，你也可以使用这个方法来恢复。
 
-你的 SD 卡必须格式化为 FAT32 才能正常进行步骤，否则 3DS 将无法识别它。 If your SD card is not yet properly formatted, use one of these pages to format it, depending on your operating system: [Windows](formatting-sd-(windows)), [Mac](formatting-sd-(mac)), [Linux](formatting-sd-(linux)).
+你的 SD 卡必须格式化为 FAT32 才能正常进行步骤，否则 3DS 将无法识别它。 如果你的 SD 卡格式不对，请根据你当前使用的操作系统使用以下其一方法来格式化：[Windows](formatting-sd-(windows)) [Mac](formatting-sd-(mac)) [Linux](formatting-sd-(linux))。
 
 ### 你需要准备点啥？
 * 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)