diff --git a/_pages/ar_SA/a9lh-to-b9s.txt b/_pages/ar_SA/a9lh-to-b9s.txt
index aa693b8793..d7799c2626 100644
--- a/_pages/ar_SA/a9lh-to-b9s.txt
+++ b/_pages/ar_SA/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/ar_SA/finalizing-setup.txt b/_pages/ar_SA/finalizing-setup.txt
index 955bf39c2e..b117a19abe 100644
--- a/_pages/ar_SA/finalizing-setup.txt
+++ b/_pages/ar_SA/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ar_SA/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ar_SA/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/ar_SA/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/ar_SA/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt b/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt
index 5a75147d11..df642102bd 100644
--- a/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/ar_SA/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/ar_SA/flashing-ntrboot-(nds).txt b/_pages/ar_SA/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/ar_SA/flashing-ntrboot-(nds).txt
+++ b/_pages/ar_SA/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/ar_SA/homebrew-launcher-(soundhax).txt b/_pages/ar_SA/homebrew-launcher-(soundhax).txt
index 49c0f81808..dbdc77d3d1 100644
--- a/_pages/ar_SA/homebrew-launcher-(soundhax).txt
+++ b/_pages/ar_SA/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ar_SA/installing-boot9strap-(hardmod).txt b/_pages/ar_SA/installing-boot9strap-(hardmod).txt
index a86c8d9d62..9ba5a31b79 100644
--- a/_pages/ar_SA/installing-boot9strap-(hardmod).txt
+++ b/_pages/ar_SA/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt b/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ar_SA/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
index 2bfeac8d82..29df08162c 100644
--- a/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ar_SA/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/ar_SA/installing-boot9strap-(pichaxx).txt b/_pages/ar_SA/installing-boot9strap-(pichaxx).txt
index 9f58ed6198..c32ee66b58 100644
--- a/_pages/ar_SA/installing-boot9strap-(pichaxx).txt
+++ b/_pages/ar_SA/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/ar_SA/installing-boot9strap-(soundhax).txt b/_pages/ar_SA/installing-boot9strap-(soundhax).txt
index 3b239e54e4..452c36489d 100644
--- a/_pages/ar_SA/installing-boot9strap-(soundhax).txt
+++ b/_pages/ar_SA/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ar_SA/installing-boot9strap-(usm).txt b/_pages/ar_SA/installing-boot9strap-(usm).txt
index 6b22c1f513..d42d29eafa 100644
--- a/_pages/ar_SA/installing-boot9strap-(usm).txt
+++ b/_pages/ar_SA/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/ar_SA/seedminer.txt b/_pages/ar_SA/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/ar_SA/seedminer.txt
+++ b/_pages/ar_SA/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ar_SA/updating-b9s.txt b/_pages/ar_SA/updating-b9s.txt
index 656f51592a..160e4d1eb6 100644
--- a/_pages/ar_SA/updating-b9s.txt
+++ b/_pages/ar_SA/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/bg_BG/a9lh-to-b9s.txt b/_pages/bg_BG/a9lh-to-b9s.txt
index aa693b8793..d7799c2626 100644
--- a/_pages/bg_BG/a9lh-to-b9s.txt
+++ b/_pages/bg_BG/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/bg_BG/finalizing-setup.txt b/_pages/bg_BG/finalizing-setup.txt
index 955bf39c2e..b117a19abe 100644
--- a/_pages/bg_BG/finalizing-setup.txt
+++ b/_pages/bg_BG/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/bg_BG/flashing-ntrboot-(3ds-multi-system).txt b/_pages/bg_BG/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/bg_BG/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/bg_BG/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/bg_BG/flashing-ntrboot-(3ds-single-system).txt b/_pages/bg_BG/flashing-ntrboot-(3ds-single-system).txt
index 5a75147d11..df642102bd 100644
--- a/_pages/bg_BG/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/bg_BG/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/bg_BG/flashing-ntrboot-(nds).txt b/_pages/bg_BG/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/bg_BG/flashing-ntrboot-(nds).txt
+++ b/_pages/bg_BG/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/bg_BG/homebrew-launcher-(soundhax).txt b/_pages/bg_BG/homebrew-launcher-(soundhax).txt
index 49c0f81808..dbdc77d3d1 100644
--- a/_pages/bg_BG/homebrew-launcher-(soundhax).txt
+++ b/_pages/bg_BG/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/bg_BG/installing-boot9strap-(hardmod).txt b/_pages/bg_BG/installing-boot9strap-(hardmod).txt
index a86c8d9d62..9ba5a31b79 100644
--- a/_pages/bg_BG/installing-boot9strap-(hardmod).txt
+++ b/_pages/bg_BG/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt b/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/bg_BG/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/bg_BG/installing-boot9strap-(ntrboot).txt b/_pages/bg_BG/installing-boot9strap-(ntrboot).txt
index 2bfeac8d82..29df08162c 100644
--- a/_pages/bg_BG/installing-boot9strap-(ntrboot).txt
+++ b/_pages/bg_BG/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/bg_BG/installing-boot9strap-(pichaxx).txt b/_pages/bg_BG/installing-boot9strap-(pichaxx).txt
index 9f58ed6198..c32ee66b58 100644
--- a/_pages/bg_BG/installing-boot9strap-(pichaxx).txt
+++ b/_pages/bg_BG/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/bg_BG/installing-boot9strap-(soundhax).txt b/_pages/bg_BG/installing-boot9strap-(soundhax).txt
index 3b239e54e4..452c36489d 100644
--- a/_pages/bg_BG/installing-boot9strap-(soundhax).txt
+++ b/_pages/bg_BG/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/bg_BG/installing-boot9strap-(usm).txt b/_pages/bg_BG/installing-boot9strap-(usm).txt
index 6b22c1f513..d42d29eafa 100644
--- a/_pages/bg_BG/installing-boot9strap-(usm).txt
+++ b/_pages/bg_BG/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/bg_BG/seedminer.txt b/_pages/bg_BG/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/bg_BG/seedminer.txt
+++ b/_pages/bg_BG/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/bg_BG/updating-b9s.txt b/_pages/bg_BG/updating-b9s.txt
index 656f51592a..160e4d1eb6 100644
--- a/_pages/bg_BG/updating-b9s.txt
+++ b/_pages/bg_BG/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/ca_ES/a9lh-to-b9s.txt b/_pages/ca_ES/a9lh-to-b9s.txt
index 94369241bf..325115b9e1 100644
--- a/_pages/ca_ES/a9lh-to-b9s.txt
+++ b/_pages/ca_ES/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/ca_ES/finalizing-setup.txt b/_pages/ca_ES/finalizing-setup.txt
index 49f5f7d8fd..663368a6b8 100644
--- a/_pages/ca_ES/finalizing-setup.txt
+++ b/_pages/ca_ES/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ca_ES/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ca_ES/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/ca_ES/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/ca_ES/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt b/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt
index 5a75147d11..df642102bd 100644
--- a/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/ca_ES/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/ca_ES/flashing-ntrboot-(nds).txt b/_pages/ca_ES/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/ca_ES/flashing-ntrboot-(nds).txt
+++ b/_pages/ca_ES/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/ca_ES/homebrew-launcher-(soundhax).txt b/_pages/ca_ES/homebrew-launcher-(soundhax).txt
index 49c0f81808..dbdc77d3d1 100644
--- a/_pages/ca_ES/homebrew-launcher-(soundhax).txt
+++ b/_pages/ca_ES/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ca_ES/installing-boot9strap-(hardmod).txt b/_pages/ca_ES/installing-boot9strap-(hardmod).txt
index a86c8d9d62..9ba5a31b79 100644
--- a/_pages/ca_ES/installing-boot9strap-(hardmod).txt
+++ b/_pages/ca_ES/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt b/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ca_ES/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
index 2bfeac8d82..29df08162c 100644
--- a/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ca_ES/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/ca_ES/installing-boot9strap-(pichaxx).txt b/_pages/ca_ES/installing-boot9strap-(pichaxx).txt
index 9f58ed6198..c32ee66b58 100644
--- a/_pages/ca_ES/installing-boot9strap-(pichaxx).txt
+++ b/_pages/ca_ES/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/ca_ES/installing-boot9strap-(soundhax).txt b/_pages/ca_ES/installing-boot9strap-(soundhax).txt
index 3b239e54e4..452c36489d 100644
--- a/_pages/ca_ES/installing-boot9strap-(soundhax).txt
+++ b/_pages/ca_ES/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ca_ES/installing-boot9strap-(usm).txt b/_pages/ca_ES/installing-boot9strap-(usm).txt
index 6b22c1f513..d42d29eafa 100644
--- a/_pages/ca_ES/installing-boot9strap-(usm).txt
+++ b/_pages/ca_ES/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/ca_ES/seedminer.txt b/_pages/ca_ES/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/ca_ES/seedminer.txt
+++ b/_pages/ca_ES/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ca_ES/updating-b9s.txt b/_pages/ca_ES/updating-b9s.txt
index 656f51592a..160e4d1eb6 100644
--- a/_pages/ca_ES/updating-b9s.txt
+++ b/_pages/ca_ES/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/cs_CZ/a9lh-to-b9s.txt b/_pages/cs_CZ/a9lh-to-b9s.txt
index aa693b8793..d7799c2626 100644
--- a/_pages/cs_CZ/a9lh-to-b9s.txt
+++ b/_pages/cs_CZ/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/cs_CZ/finalizing-setup.txt b/_pages/cs_CZ/finalizing-setup.txt
index 955bf39c2e..b117a19abe 100644
--- a/_pages/cs_CZ/finalizing-setup.txt
+++ b/_pages/cs_CZ/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/cs_CZ/flashing-ntrboot-(3ds-multi-system).txt b/_pages/cs_CZ/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/cs_CZ/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/cs_CZ/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt b/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt
index 5a75147d11..df642102bd 100644
--- a/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/cs_CZ/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/cs_CZ/flashing-ntrboot-(nds).txt b/_pages/cs_CZ/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/cs_CZ/flashing-ntrboot-(nds).txt
+++ b/_pages/cs_CZ/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt
index 49c0f81808..dbdc77d3d1 100644
--- a/_pages/cs_CZ/homebrew-launcher-(soundhax).txt
+++ b/_pages/cs_CZ/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
index a86c8d9d62..9ba5a31b79 100644
--- a/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt b/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
index 2bfeac8d82..29df08162c 100644
--- a/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt b/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt
index 9f58ed6198..c32ee66b58 100644
--- a/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt
index 3b239e54e4..452c36489d 100644
--- a/_pages/cs_CZ/installing-boot9strap-(soundhax).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/cs_CZ/installing-boot9strap-(usm).txt b/_pages/cs_CZ/installing-boot9strap-(usm).txt
index 6b22c1f513..d42d29eafa 100644
--- a/_pages/cs_CZ/installing-boot9strap-(usm).txt
+++ b/_pages/cs_CZ/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/cs_CZ/seedminer.txt b/_pages/cs_CZ/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/cs_CZ/seedminer.txt
+++ b/_pages/cs_CZ/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/cs_CZ/updating-b9s.txt b/_pages/cs_CZ/updating-b9s.txt
index 656f51592a..160e4d1eb6 100644
--- a/_pages/cs_CZ/updating-b9s.txt
+++ b/_pages/cs_CZ/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/de_DE/a9lh-to-b9s.txt b/_pages/de_DE/a9lh-to-b9s.txt
index 4acfd1c6ff..327b984b6b 100644
--- a/_pages/de_DE/a9lh-to-b9s.txt
+++ b/_pages/de_DE/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Beachte, dass auf dem New 3DS die `secret_sector.bin` benötigt wird, um den arm
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Anleitung
#### Schritt I - Vorbereitungen
diff --git a/_pages/de_DE/finalizing-setup.txt b/_pages/de_DE/finalizing-setup.txt
index 9756466de6..b30a7cbd0e 100644
--- a/_pages/de_DE/finalizing-setup.txt
+++ b/_pages/de_DE/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/de_DE/flashing-ntrboot-(3ds-multi-system).txt b/_pages/de_DE/flashing-ntrboot-(3ds-multi-system).txt
index deb5443dca..174440f6d2 100644
--- a/_pages/de_DE/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/de_DE/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ In seltenen Fällen ist kann es sein, dass während des Flashens einer gefälsch
* Zwei 3DS Konsolen
+ **Der Quell-3DS**: das System auf dem schon boot9strap läuft
+ **Der Ziel-3DS**: das System mit regulärer Firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Anleitung
diff --git a/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt b/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt
index d3d2e04710..9c45fec0e5 100644
--- a/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/de_DE/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ In seltenen Fällen ist kann es sein, dass während des Flashens einer gefälsch
### Was du brauchst
* Deine ntrboot kompatible Flashkarte
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Anleitung
diff --git a/_pages/de_DE/flashing-ntrboot-(nds).txt b/_pages/de_DE/flashing-ntrboot-(nds).txt
index 238aead804..353297600d 100644
--- a/_pages/de_DE/flashing-ntrboot-(nds).txt
+++ b/_pages/de_DE/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ In manchen seltenen Fällen ist es möglich, das während des Flashens einer gef
* Zwei Geräte
+ **Der Quell-NDS / -NDSL**: Der Nintendo DS oder Nintendo DS Lite, welcher mit deiner Flashkarte kompatibel ist
+ **Der Ziel-3DS**: das Gerät der 3DS-Familie mit regulärer Firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Anleitung
diff --git a/_pages/de_DE/homebrew-launcher-(soundhax).txt b/_pages/de_DE/homebrew-launcher-(soundhax).txt
index 9695e58d71..45c00121a5 100644
--- a/_pages/de_DE/homebrew-launcher-(soundhax).txt
+++ b/_pages/de_DE/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Stelle sicher, dass die Drahtloskommunikation deiner Konsole eingeschaltet ist,
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/de_DE/installing-boot9strap-(hardmod).txt b/_pages/de_DE/installing-boot9strap-(hardmod).txt
index 486f39f4e1..f8f8429c9b 100644
--- a/_pages/de_DE/installing-boot9strap-(hardmod).txt
+++ b/_pages/de_DE/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ Dies funktioniert auf mit New 3DS, New 2DS, Old 3DS und Old 2DS auf *allen* Vers
### Was du brauchst
*Deine NAND-Sicherheitskopie, welche du mit Hilfe deines [Hardmods](https://gbatemp.net/threads/414498/) erstellt hast
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows-Benutzer können die kompilierte `.exe` benutzen, während Mac und Linux-Benutzer [Python 3] (https://www.python.org/downloads/) installiert haben müssen, um die `.py` auszuführen
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/de_DE/installing-boot9strap-(kartdlphax).txt b/_pages/de_DE/installing-boot9strap-(kartdlphax).txt
index b12f53a6fc..45ef694ac7 100644
--- a/_pages/de_DE/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/de_DE/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/de_DE/installing-boot9strap-(ntrboot).txt b/_pages/de_DE/installing-boot9strap-(ntrboot).txt
index b7f63c8b70..28d0523999 100644
--- a/_pages/de_DE/installing-boot9strap-(ntrboot).txt
+++ b/_pages/de_DE/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Ein Magnet, der den Standby-Modus des Geräts auslöst (wenn das Gerät zuklappbar ist)
* Deine ntrboot geflashte Flashkarte
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Anleitung
diff --git a/_pages/de_DE/installing-boot9strap-(pichaxx).txt b/_pages/de_DE/installing-boot9strap-(pichaxx).txt
index 3a2644c5f1..2f8d4b49a9 100644
--- a/_pages/de_DE/installing-boot9strap-(pichaxx).txt
+++ b/_pages/de_DE/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/de_DE/installing-boot9strap-(soundhax).txt b/_pages/de_DE/installing-boot9strap-(soundhax).txt
index ba2e81787c..72fb781a07 100644
--- a/_pages/de_DE/installing-boot9strap-(soundhax).txt
+++ b/_pages/de_DE/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Gehe zu `/SDCARD` und spiele die Datei "<3 nedwill 2016" ab
+ Dies kann einige Versuche benötigen
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/de_DE/installing-boot9strap-(usm).txt b/_pages/de_DE/installing-boot9strap-(usm).txt
index ec648dfc38..705530157f 100644
--- a/_pages/de_DE/installing-boot9strap-(usm).txt
+++ b/_pages/de_DE/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### Was du brauchst
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Schritt I - Vorbereitungen
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Stecke deine SD-Karte in deinen Computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Erstelle einen Ordner namens `boot9strap` im Stammverzeichnis deiner SD-Karte
+1. Kopiere `boot9strap.firm` und `boot9strap.firm.sha` aus der boot9strap `.zip` in den `/boot9strap/`-Ordner auf deiner SD-Karte
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Schritt IV - Luma3DS konfigurieren
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Dein Gerät sollte neu starten und die Luma3DS Konfiguration anzeigen
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/de_DE/seedminer.txt b/_pages/de_DE/seedminer.txt
index 9b8b34fd9b..4edbdd6b61 100644
--- a/_pages/de_DE/seedminer.txt
+++ b/_pages/de_DE/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/de_DE/updating-b9s.txt b/_pages/de_DE/updating-b9s.txt
index eba465875d..fffce21b2b 100644
--- a/_pages/de_DE/updating-b9s.txt
+++ b/_pages/de_DE/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### Was du brauchst
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Anleitung
diff --git a/_pages/el_GR/a9lh-to-b9s.txt b/_pages/el_GR/a9lh-to-b9s.txt
index f09b276268..0d9de4143e 100644
--- a/_pages/el_GR/a9lh-to-b9s.txt
+++ b/_pages/el_GR/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/el_GR/finalizing-setup.txt b/_pages/el_GR/finalizing-setup.txt
index 7bd1b566f3..cc0e78a459 100644
--- a/_pages/el_GR/finalizing-setup.txt
+++ b/_pages/el_GR/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/el_GR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/el_GR/flashing-ntrboot-(3ds-multi-system).txt
index 98465eda43..9c64d363fc 100644
--- a/_pages/el_GR/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/el_GR/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt b/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt
index 950e3ad254..d5efca0c30 100644
--- a/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/el_GR/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/el_GR/flashing-ntrboot-(nds).txt b/_pages/el_GR/flashing-ntrboot-(nds).txt
index 537c8a3d7a..c6082dc910 100644
--- a/_pages/el_GR/flashing-ntrboot-(nds).txt
+++ b/_pages/el_GR/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/el_GR/homebrew-launcher-(soundhax).txt b/_pages/el_GR/homebrew-launcher-(soundhax).txt
index 72ea8a443a..9b4d62a7bc 100644
--- a/_pages/el_GR/homebrew-launcher-(soundhax).txt
+++ b/_pages/el_GR/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/el_GR/installing-boot9strap-(hardmod).txt b/_pages/el_GR/installing-boot9strap-(hardmod).txt
index d3270d2726..c502a85fd7 100644
--- a/_pages/el_GR/installing-boot9strap-(hardmod).txt
+++ b/_pages/el_GR/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/el_GR/installing-boot9strap-(kartdlphax).txt b/_pages/el_GR/installing-boot9strap-(kartdlphax).txt
index 68f49ae750..cabd03b4e1 100644
--- a/_pages/el_GR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/el_GR/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/el_GR/installing-boot9strap-(ntrboot).txt b/_pages/el_GR/installing-boot9strap-(ntrboot).txt
index 0151561e05..3936b7676e 100644
--- a/_pages/el_GR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/el_GR/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/el_GR/installing-boot9strap-(pichaxx).txt b/_pages/el_GR/installing-boot9strap-(pichaxx).txt
index 44fd58cde2..f970f72629 100644
--- a/_pages/el_GR/installing-boot9strap-(pichaxx).txt
+++ b/_pages/el_GR/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/el_GR/installing-boot9strap-(soundhax).txt b/_pages/el_GR/installing-boot9strap-(soundhax).txt
index 74f1ccf22b..b44cf20a77 100644
--- a/_pages/el_GR/installing-boot9strap-(soundhax).txt
+++ b/_pages/el_GR/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Μεταβείτε στο `/SDCARD`, στην συνέχεια παίξτε το "<3 nedwill 2016"
+ Μπορεί να χρειαστούν αρκετές προσπάθειες
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/el_GR/installing-boot9strap-(usm).txt b/_pages/el_GR/installing-boot9strap-(usm).txt
index 7ca4b6145e..f69d793b32 100644
--- a/_pages/el_GR/installing-boot9strap-(usm).txt
+++ b/_pages/el_GR/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Εισάγετε την κάρτα SD στον υπολογιστή σας
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/el_GR/seedminer.txt b/_pages/el_GR/seedminer.txt
index a53687f0df..05b67290a2 100644
--- a/_pages/el_GR/seedminer.txt
+++ b/_pages/el_GR/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/el_GR/updating-b9s.txt b/_pages/el_GR/updating-b9s.txt
index 9f3376a96e..56e1d565db 100644
--- a/_pages/el_GR/updating-b9s.txt
+++ b/_pages/el_GR/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/en_PT/a9lh-to-b9s.txt b/_pages/en_PT/a9lh-to-b9s.txt
index 0be88afeac..a998e8207f 100644
--- a/_pages/en_PT/a9lh-to-b9s.txt
+++ b/_pages/en_PT/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/en_PT/finalizing-setup.txt b/_pages/en_PT/finalizing-setup.txt
index abe9e19a00..acbcd05ee4 100644
--- a/_pages/en_PT/finalizing-setup.txt
+++ b/_pages/en_PT/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/en_PT/flashing-ntrboot-(3ds-multi-system).txt b/_pages/en_PT/flashing-ntrboot-(3ds-multi-system).txt
index e8e787c79b..e6b300a176 100644
--- a/_pages/en_PT/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/en_PT/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare cases, it may be possible fer th' flashin' process to **b
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt b/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt
index 68be34b2d0..bbbecf3dae 100644
--- a/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/en_PT/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare cases, it may be possible fer th' flashin' process to **b
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/en_PT/flashing-ntrboot-(nds).txt b/_pages/en_PT/flashing-ntrboot-(nds).txt
index 6bd20c173f..c003ffbdc9 100644
--- a/_pages/en_PT/flashing-ntrboot-(nds).txt
+++ b/_pages/en_PT/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible fer th' flashin' proces
* Two devices
+ **Th' source NDS / NDSL**: th' Nintendo DS or Nintendo DS Lite which be compatible wit' ye flashcart
+ **Th' target 3DS**: th' 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/en_PT/homebrew-launcher-(soundhax).txt b/_pages/en_PT/homebrew-launcher-(soundhax).txt
index 4efd406fff..df8304d650 100644
--- a/_pages/en_PT/homebrew-launcher-(soundhax).txt
+++ b/_pages/en_PT/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/en_PT/installing-boot9strap-(hardmod).txt b/_pages/en_PT/installing-boot9strap-(hardmod).txt
index da99af47a4..7b888e1046 100644
--- a/_pages/en_PT/installing-boot9strap-(hardmod).txt
+++ b/_pages/en_PT/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/en_PT/installing-boot9strap-(kartdlphax).txt b/_pages/en_PT/installing-boot9strap-(kartdlphax).txt
index be891b2d55..610e3344c5 100644
--- a/_pages/en_PT/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/en_PT/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/en_PT/installing-boot9strap-(ntrboot).txt b/_pages/en_PT/installing-boot9strap-(ntrboot).txt
index e1cc7293e0..62f296102d 100644
--- a/_pages/en_PT/installing-boot9strap-(ntrboot).txt
+++ b/_pages/en_PT/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers th' sleep mode 'o ye device (if ye be usin' a foldin' style one)
* Ye ntrboot-flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/en_PT/installing-boot9strap-(pichaxx).txt b/_pages/en_PT/installing-boot9strap-(pichaxx).txt
index e0d1f95171..ee9962e700 100644
--- a/_pages/en_PT/installing-boot9strap-(pichaxx).txt
+++ b/_pages/en_PT/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/en_PT/installing-boot9strap-(soundhax).txt b/_pages/en_PT/installing-boot9strap-(soundhax).txt
index 56be055410..a0f6ce9e94 100644
--- a/_pages/en_PT/installing-boot9strap-(soundhax).txt
+++ b/_pages/en_PT/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/en_PT/installing-boot9strap-(usm).txt b/_pages/en_PT/installing-boot9strap-(usm).txt
index db922f1c1a..1ad1c94bef 100644
--- a/_pages/en_PT/installing-boot9strap-(usm).txt
+++ b/_pages/en_PT/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert ye SD card into ye computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on th' root 'o ye SD card
+1. Copy `boot9strap.firm` 'n `boot9strap.firm.sha` from th' boot9strap `.zip` to th' `/boot9strap/` folder on ye SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Ye device should have rebooted into th' Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/en_PT/seedminer.txt b/_pages/en_PT/seedminer.txt
index e00166c4f3..a3003c9f46 100644
--- a/_pages/en_PT/seedminer.txt
+++ b/_pages/en_PT/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/en_PT/updating-b9s.txt b/_pages/en_PT/updating-b9s.txt
index e1bc1c033f..ab081db767 100644
--- a/_pages/en_PT/updating-b9s.txt
+++ b/_pages/en_PT/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/es_ES/a9lh-to-b9s.txt b/_pages/es_ES/a9lh-to-b9s.txt
index 4a7a6c4837..d9012ca0e3 100644
--- a/_pages/es_ES/a9lh-to-b9s.txt
+++ b/_pages/es_ES/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Ten en cuenta que sólo en la New 3DS, `secret_sector.bin` es requerido para rev
* La versión más reciente de [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* La versión v7.0.5 de [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(el archivo`.7z`)*
* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La versión más reciente de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instrucciones
#### Sección I - Preparativos
diff --git a/_pages/es_ES/finalizing-setup.txt b/_pages/es_ES/finalizing-setup.txt
index b4270aad38..aa7d6fb39a 100644
--- a/_pages/es_ES/finalizing-setup.txt
+++ b/_pages/es_ES/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/es_ES/flashing-ntrboot-(3ds-multi-system).txt b/_pages/es_ES/flashing-ntrboot-(3ds-multi-system).txt
index 0720d4e085..18c83922fe 100644
--- a/_pages/es_ES/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/es_ES/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flas
* Dos consolas de la familia 3DS
+ **La 3DS de origen**: la consola de la familia 3DS que ya tiene boot9strap instalado
+ **3DS de destino**: la consola sin modificar
-* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* La última versión de [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instrucciones
diff --git a/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt b/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt
index c5b0ee34c9..3a15e1e6c0 100644
--- a/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/es_ES/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flas
### Qué necesitas
* Tu flashcart compatible con ntrboot
-* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* La última versión de [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instrucciones
diff --git a/_pages/es_ES/flashing-ntrboot-(nds).txt b/_pages/es_ES/flashing-ntrboot-(nds).txt
index 555dcfdb35..01d58ce313 100644
--- a/_pages/es_ES/flashing-ntrboot-(nds).txt
+++ b/_pages/es_ES/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Ten en cuenta que en raras ocasiones, es posible que realizar el proceso de flas
* Dos consolas
+ **La NDS / NDSL de origen**: una Nintendo DS o Nintendo DS Lite compatible con tu flashcart
+ **3DS de destino**: la consola de la familia 3DS sin modificar
-* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* La última versión de [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instrucciones
diff --git a/_pages/es_ES/homebrew-launcher-(soundhax).txt b/_pages/es_ES/homebrew-launcher-(soundhax).txt
index 119828c59d..5c301d90db 100644
--- a/_pages/es_ES/homebrew-launcher-(soundhax).txt
+++ b/_pages/es_ES/homebrew-launcher-(soundhax).txt
@@ -18,7 +18,7 @@ Asegúrate de que la Comunicación inalámbrica de tu dispositivo está encendid
+ Si Soundhax aparece en tu navegador como un vídeo no reproducible, presiona Ctrl+S o Cmd+S para guardarlo en tu computadora
* La última versión de [SafeB9SInstaller]
(https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La versión más reciente de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La última versión de [safehax](https://github.com/TiniVi/safehax/releases/latest) *(el archivo `.3dsx`)*
* La última versión de [udsploit](https://github.com/smealum/udsploit/releases/latest)
* La versión más reciente de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/es_ES/installing-boot9strap-(hardmod).txt b/_pages/es_ES/installing-boot9strap-(hardmod).txt
index 3236c911e3..1daa36eadc 100644
--- a/_pages/es_ES/installing-boot9strap-(hardmod).txt
+++ b/_pages/es_ES/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ Esto funcionará en New 3DS, New 2DS, Old 3DS, y Old 2DS en *todas* las versione
### Qué necesitas
* Una imagen de tu NAND extraída usando [hardmod](https://gbatemp.net/threads/414498/) (*en inglés*)
-* La versión más reciente de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La última versión de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Los usuarios de Windows pueden usar el `.exe` compilado, mientras que los usuarios de Mac y Linux necesitarán tener [Python 3](https://www.python.org/downloads/) instalado para ejecutar el `.py`
* La versión más reciente de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/es_ES/installing-boot9strap-(kartdlphax).txt b/_pages/es_ES/installing-boot9strap-(kartdlphax).txt
index 0471933615..0f586b1441 100644
--- a/_pages/es_ES/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/es_ES/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ En la **3DS de origen** (la 3DS con custom firmware):
En la **3DS de destino** (la 3DS que estás intentando modificar):
* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La versión más reciente de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La ultima versión de [Luma3DS normal](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Sección I - Preparativos (3DS de origen)
diff --git a/_pages/es_ES/installing-boot9strap-(ntrboot).txt b/_pages/es_ES/installing-boot9strap-(ntrboot).txt
index 540ed3575b..3d0c0a185b 100644
--- a/_pages/es_ES/installing-boot9strap-(ntrboot).txt
+++ b/_pages/es_ES/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Un imán que activa el modo de espera de tu consola (si usas una consola con tapa)
* Tu flashcart con ntrboot instalado
* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La versión más reciente de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La versión más reciente de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instrucciones
diff --git a/_pages/es_ES/installing-boot9strap-(pichaxx).txt b/_pages/es_ES/installing-boot9strap-(pichaxx).txt
index 36f419b09a..174ce5e7ef 100644
--- a/_pages/es_ES/installing-boot9strap-(pichaxx).txt
+++ b/_pages/es_ES/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Tu tarjeta SD debe estar insertada en tu consola para instalar Pokémon Picross
* Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer)
* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La versión más reciente de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La versión más reciente de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
* La ultima versión de [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/es_ES/installing-boot9strap-(soundhax).txt b/_pages/es_ES/installing-boot9strap-(soundhax).txt
index cd518c748c..8187cf33e1 100644
--- a/_pages/es_ES/installing-boot9strap-(soundhax).txt
+++ b/_pages/es_ES/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (en combinación con universal-otherapp) es compatible con las versione
* La última versión de [Soundhax](http://soundhax.com) *(correspondiente a tu consola, región y versión)*
+ Si Soundhax aparece en tu navegador como un vídeo no reproducible, presiona Ctrl+S o Cmd+S para guardarlo en tu computadora
* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La versión más reciente de [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La versión más reciente de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
* La ultima versión de [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (en combinación con universal-otherapp) es compatible con las versione
1. Ve a `/SDCARD`, y luego reproduce "<3 nedwill 2016"
+ Esto podría tomar varios intentos
+ Si se congela, fuerza el apagado de la consola manteniendo presionado el botón de apagado y luego intenta el proceso de nuevo
- + Si tu consola se queda con la pantalla en rojo y blanco *y a la vez* se encuentra en versión de firmware 9.4.0, 9.5.0 o 9.6.0, prueba a seguir [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/es_ES/installing-boot9strap-(usm).txt b/_pages/es_ES/installing-boot9strap-(usm).txt
index 57d8adefee..e59a27363d 100644
--- a/_pages/es_ES/installing-boot9strap-(usm).txt
+++ b/_pages/es_ES/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### Qué necesitas
* Tu archivo `movable.sed` proveniente de haber completado [Seedminer](seedminer)
+* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La versión más reciente de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Sección I - Preparativos
1. Si tu consola está encendida, apágala
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Inserta tu tarjeta SD en tu computadora
1. Copia los archivos `boot.firm` y `boot.3dsx` desde el `.zip` de Luma3DS a la raíz de tu tarjeta SD
+ La raíz de tu tarjeta SD se refiere al primer directorio de la tarjeta, donde puedes ver la carpeta Nintendo 3DS pero no estás dentro de ella
+1. Crea una carpeta llamada `boot9strap` en la raíz de tu tarjeta SD
+1. Copia `boot9strap.firm` y `boot9strap.firm.sha` desde el `.zip` de `boot9strap` a la carpeta `/boot9strap/` en tu tarjeta SD
+1. Copia `SafeB9SInstaller.bin` desde el `.zip` de SafeB9SInstaller a la raíz de tu tarjeta SD
1. Copia el archivo `usm.bin` desde `unSAFE_MODE.zip` a la raíz de tu tarjeta SD
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Cuando se te pregunte "¿Quieres configurar tu conexión a internet?", selecciona "Aceptar"
1. En el menú siguiente, navega a `Conexión 1` -> `Modificar ajustes` -> `Siguiente página (flecha derecha)` -> `Servidor proxy` -> `Ajustes avanzados`
+ Esto es una [representación visual](https://uwuu.ca/images/safemode_highlighted.png)
-1. Una vez que veas `B9S install SUCCESS` en la pantalla superior, presiona cualquier botón para reiniciar a la configuración de Luma
+1. Si el exploit ha funcionado, la consola habrá iniciado SafeB9SInstaller
-#### Sección IV - Configurar Luma3DS
+#### Section IV - Installing boot9strap
+
+1. Cuando se te pida, introduce la combinación de botones mostrada para instalar boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Sección V - Configurando Luma3DS
1. Tu consola debería haber reiniciado en el menú de configuración de Luma3DS
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ En este punto, tu consola arrancará por defecto en Luma3DS siempre que la tarje
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ En la página siguiente, copiarás Luma3DS a la memoria interna de la consola para que puedas encenderla sin una tarjeta SD.
-#### Sección V - Restaurar los perfiles de configuración WiFi
+#### Section VI - Restoring WiFi Configuration Profiles
1. Entra a Configuración de la consola
1. Ve a `Data Management` -> `DSiWare`
diff --git a/_pages/es_ES/seedminer.txt b/_pages/es_ES/seedminer.txt
index 2a83a3f694..f859b52021 100644
--- a/_pages/es_ES/seedminer.txt
+++ b/_pages/es_ES/seedminer.txt
@@ -20,7 +20,7 @@ Este método utiliza una tarjeta gráfica potente para realizar los cálculos ne
1. Ve a la carpeta `Nintendo 3DS` en tu tarjeta SD
1. Copia el nombre de 32 caracteres de la carpeta que hay dentro de Nintendo 3DS
+ No abras más carpetas dentro de ésta
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/es_ES/updating-b9s.txt b/_pages/es_ES/updating-b9s.txt
index 044ea749b3..f37378dbae 100644
--- a/_pages/es_ES/updating-b9s.txt
+++ b/_pages/es_ES/updating-b9s.txt
@@ -14,7 +14,7 @@ Si bien se considera seguro el custom firmware para funciones en línea, ha habi
### Qué necesitas
* La última versión de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La última versión de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; no el archivo `devkit` ni el archivo `ntr`)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La versión más reciente de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instrucciones
diff --git a/_pages/fi_FI/a9lh-to-b9s.txt b/_pages/fi_FI/a9lh-to-b9s.txt
index f29b9f010e..0c640d7a2e 100644
--- a/_pages/fi_FI/a9lh-to-b9s.txt
+++ b/_pages/fi_FI/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Huomaa, että New 3DS:llä `secret_sector.bin`-tiedostoa tarvitaan vain arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Ohjeet
#### Vaihe I – Valmistelut
diff --git a/_pages/fi_FI/finalizing-setup.txt b/_pages/fi_FI/finalizing-setup.txt
index 6958d624d4..a3cbd1302c 100644
--- a/_pages/fi_FI/finalizing-setup.txt
+++ b/_pages/fi_FI/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/fi_FI/flashing-ntrboot-(3ds-multi-system).txt b/_pages/fi_FI/flashing-ntrboot-(3ds-multi-system).txt
index 8cda9ed25b..0b2287e39a 100644
--- a/_pages/fi_FI/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/fi_FI/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **
* Kaksi 3DS-perheen konsolia
+ **Lähde-3DS**: 3DS-perheen konsoli, jolla on jo asennettuna boot9strap
+ **Kohde-3DS**: konsoli, jolla on vakiolaiteohjelmisto
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Ohjeet
diff --git a/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt b/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt
index 48867db4b5..b8c2005a49 100644
--- a/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/fi_FI/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **
### Tarpeet
* Ntrboot-yhteensopiva flash-korttisi
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Ohjeet
diff --git a/_pages/fi_FI/flashing-ntrboot-(nds).txt b/_pages/fi_FI/flashing-ntrboot-(nds).txt
index 38ff803147..75977cd00a 100644
--- a/_pages/fi_FI/flashing-ntrboot-(nds).txt
+++ b/_pages/fi_FI/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Huomaa, että joissain harvinaisissa yhteensattumissa asennusprosessi saattaa **
* Kaksi konsolia
+ **Lähde-NDS/-NDSL**: flash-korttisi kanssa yhteensopiva NIntendo DS tai Nintendo DS Lite
+ **Kohde-3DS**: 3DS-perheen konsoli, jolla on vakiolaiteohjelmisto
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Ohjeet
diff --git a/_pages/fi_FI/homebrew-launcher-(soundhax).txt b/_pages/fi_FI/homebrew-launcher-(soundhax).txt
index 6323458e1e..2883bd426f 100644
--- a/_pages/fi_FI/homebrew-launcher-(soundhax).txt
+++ b/_pages/fi_FI/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Varmista, että langaton yhteys on päällä, sillä udsploit (käytetään seur
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/fi_FI/installing-boot9strap-(hardmod).txt b/_pages/fi_FI/installing-boot9strap-(hardmod).txt
index a62b65c708..7bb9594c58 100644
--- a/_pages/fi_FI/installing-boot9strap-(hardmod).txt
+++ b/_pages/fi_FI/installing-boot9strap-(hardmod).txt
@@ -20,7 +20,7 @@ Tämä toimii *kaikilla* versioilla New 3DS:llä, New 2DS:llä, vanhalla 3DS:ll
### Tarpeet
* [Laitteistomodauksesi](https://gbatemp.net/threads/414498/) avulla poimittu NAND-näköistiedosto
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows-käyttäjät voivat käyttää käännettyä `.exe`-tiedostoa, Mac- ja Linux-käyttäjät taas tarvitsevat [Python 3](https://www.python.org/downloads/):n suorittaakseen `.py`-tiedoston
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt
index 5223411f9d..c2e57ef460 100644
--- a/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/fi_FI/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
index 1a2b039f66..f19473d91c 100644
--- a/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
+++ b/_pages/fi_FI/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Magneetti, jolla voit asettaa konsolisi lepotilaan (jos käytössä on läpällinen malli)
* Flash-korttisi, jolla on asennettuna ntrboot
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Ohjeet
diff --git a/_pages/fi_FI/installing-boot9strap-(pichaxx).txt b/_pages/fi_FI/installing-boot9strap-(pichaxx).txt
index 9284919d78..b5b97964a0 100644
--- a/_pages/fi_FI/installing-boot9strap-(pichaxx).txt
+++ b/_pages/fi_FI/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/fi_FI/installing-boot9strap-(soundhax).txt b/_pages/fi_FI/installing-boot9strap-(soundhax).txt
index c8d00163bd..0ca0134db5 100644
--- a/_pages/fi_FI/installing-boot9strap-(soundhax).txt
+++ b/_pages/fi_FI/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Mene hakemistoon `/SDCARD` ja toista tiedosto "<3 nedwill 2016"
+ Tämä saattaa vaatia useita yrityksiä
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/fi_FI/installing-boot9strap-(usm).txt b/_pages/fi_FI/installing-boot9strap-(usm).txt
index 8711a8756b..fd99127121 100644
--- a/_pages/fi_FI/installing-boot9strap-(usm).txt
+++ b/_pages/fi_FI/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### Tarpeet
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Vaihe I – Valmistelut
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Aseta SD-korttisi tietokoneeseesi
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Luo `boot9strap`-niminen kansio SD-korttisi juureen
+1. Kopioi boot9strap-`.zip`-pakkauksesta `boot9strap.firm` ja `boot9strap.firm.sha` SD-korttisi `/boot9strap/`-kansioon
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Vaihe IV – Luma3DS:n määrittäminen
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Konsolisi pitäisi uudelleenkäynnistyä suoraan Luma3DS:n määritysvalikkoon
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/fi_FI/seedminer.txt b/_pages/fi_FI/seedminer.txt
index d6722953be..9efd99bfe4 100644
--- a/_pages/fi_FI/seedminer.txt
+++ b/_pages/fi_FI/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/fi_FI/updating-b9s.txt b/_pages/fi_FI/updating-b9s.txt
index 2a3b541b0a..43e40ffbca 100644
--- a/_pages/fi_FI/updating-b9s.txt
+++ b/_pages/fi_FI/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### Tarpeet
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Ohjeet
diff --git a/_pages/fr_FR/a9lh-to-b9s.txt b/_pages/fr_FR/a9lh-to-b9s.txt
index 2f4630fbb5..4835b4140a 100644
--- a/_pages/fr_FR/a9lh-to-b9s.txt
+++ b/_pages/fr_FR/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Notez que, seulement sur New 3DS, `secret_sector.bin` est nécessaire pour reven
* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
* La version v7.0.5 de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(le fichier `.7z`)*
* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Préparatifs
diff --git a/_pages/fr_FR/finalizing-setup.txt b/_pages/fr_FR/finalizing-setup.txt
index c025162365..1f7a5337b8 100644
--- a/_pages/fr_FR/finalizing-setup.txt
+++ b/_pages/fr_FR/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt
index 6d7937f3c0..4171f3d639 100644
--- a/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/fr_FR/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Notez que dans de rares circonstances, il est possible que pendant le processus
* Deux dispositifs de la famille 3DS
+ **La 3DS source** : La 3DS qui tourne déjà sous boot9strap
+ **La 3DS cible** : la 3DS sur un firmware original non modifié
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* La dernière version de [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt b/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt
index d033e72a5d..d6f9f6f50e 100644
--- a/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/fr_FR/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Notez que dans de rares circonstances, il est possible que pendant le processus
## Ce dont vous avez besoin
* Votre linker compatible ntrboot
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* La dernière version de [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/fr_FR/flashing-ntrboot-(nds).txt b/_pages/fr_FR/flashing-ntrboot-(nds).txt
index a0817b5872..35f35f53cb 100644
--- a/_pages/fr_FR/flashing-ntrboot-(nds).txt
+++ b/_pages/fr_FR/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Notez qu'il est possible que pendant le flash sur un clone celui-ci devienne **i
* Deux Consoles
+ **La NDS / NDSL source** : la Nintendo DS ou Nintendo DS Lite qui est compatible avec votre cartouche
+ **La 3DS cible** : la 3DS sur un firmware original non modifié
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* La dernière version de [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/fr_FR/homebrew-launcher-(soundhax).txt b/_pages/fr_FR/homebrew-launcher-(soundhax).txt
index c32d61bcbe..85522e33ca 100644
--- a/_pages/fr_FR/homebrew-launcher-(soundhax).txt
+++ b/_pages/fr_FR/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Assurez vous que la communication sans fil de votre appareil est allumée, vu qu
* La dernière version de [Soundhax](http://soundhax.com) *(en fonction de votre console, de son modèle, et de sa région)*
+ Si Soundhax apparaît dans votre navigateur comme une vidéo illisible, appuyez sur Ctrl + S ou Cmd + S pour l'enregistrer sur votre ordinateur
* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La dernière version de [safehax](https://github.com/TiniVi/safehax/releases/latest) *(le fichier`.3dsx`)*
* La dernière version de [udsploit](https://github.com/smealum/udsploit/releases/latest)
* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/fr_FR/installing-boot9strap-(hardmod).txt b/_pages/fr_FR/installing-boot9strap-(hardmod).txt
index 3bdc060182..55f9f7b3e4 100644
--- a/_pages/fr_FR/installing-boot9strap-(hardmod).txt
+++ b/_pages/fr_FR/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ Cela fonctionne sur la New3DS, Old3DS, New 2DS et Old 3DS sur *toutes* les versi
## Ce dont vous avez besoin
* Une image de votre NAND extraite à l’aide de votre [hardmod](https://gbatemp.net/threads/414498/) [Kits Hardmod](http://www.consolex-bordeaux.fr/content/kit-hardmod-nand-2ds-3ds-new3ds)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La dernière version de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Les utilisateurs de Windows peuvent utiliser le `.exe` compilé, tandis que les utilisateurs Mac et Linux devront avoir [Python 3](https://www.python.org/downloads/) installé pour exécuter le `.py`
* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt
index c149de8cdf..c636784be5 100644
--- a/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/fr_FR/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ Sur la **3DS source** (la 3DS avec un firmware custom) :
Sur la **3DS cible** (la 3DS que vous essayez de modifier):
* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
index 831341ed8e..b51168a41c 100644
--- a/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/fr_FR/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Un aimant qui déclenche le mode veille de votre console (si vous avez une console pliable)
* Votre linker DS
* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/fr_FR/installing-boot9strap-(pichaxx).txt b/_pages/fr_FR/installing-boot9strap-(pichaxx).txt
index f22d71ff00..c2ed00a07a 100644
--- a/_pages/fr_FR/installing-boot9strap-(pichaxx).txt
+++ b/_pages/fr_FR/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer)
* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
* La dernière version de [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/fr_FR/installing-boot9strap-(soundhax).txt b/_pages/fr_FR/installing-boot9strap-(soundhax).txt
index 2aa59fdb51..58e89fcf06 100644
--- a/_pages/fr_FR/installing-boot9strap-(soundhax).txt
+++ b/_pages/fr_FR/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (quand combiné avec pre9otherapp) est compatible avec les versions com
* La dernière version de [Soundhax](http://soundhax.com) *(en fonction de votre console, de son modèle, et de sa région)*
+ Si Soundhax apparaît dans votre navigateur comme une vidéo illisible, appuyez sur Ctrl + S ou Cmd + S pour l'enregistrer sur votre ordinateur
* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
* La dernière version de [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (quand combiné avec pre9otherapp) est compatible avec les versions com
1. Naviguez vers `/SDCARD`, puis lisez le fichier "<3 nedwill 2016"
+ Il se peut que cela nécessite plusieurs tentatives
+ Si la console ne répond plus, forcez-la simplement à s'éteindre en maintenant le bouton Power, puis réessayez
- + Si votre console affiche un écran rouge et blanc *et* que celle-ci est sur la version 9.4.0, 9.5.0 ou 9.6.0, essayez de suivre [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/fr_FR/installing-boot9strap-(usm).txt b/_pages/fr_FR/installing-boot9strap-(usm).txt
index 539c7e1e25..90ca973e42 100644
--- a/_pages/fr_FR/installing-boot9strap-(usm).txt
+++ b/_pages/fr_FR/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
## Ce dont vous avez besoin
* Votre fichier `movable.sed` obtenu grâce à [Seedminer](seedminer)
+* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Préparatifs
1. Si votre console est allumée, éteignez la
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insérez votre carte SD dans votre ordinateur
1. Copiez `boot.firm` et `boot.3dsx` depuis Luma3DS `.zip`vers la racine de votre carte SD
+ La racine de la carte SD représente le répertoire initial de la carte SD où vous pouvez voir le dossier Nintendo 3DS, mais ce n'est pas à l'intérieur de ce dernier
+1. Créez un dossier à la racine de votre carte SD nommé `boot9strap`
+1. Copiez `boot9strap.firm` et `boot9strap.firm.sha` depuis le fichier ".zip" de boot9strap vers le dossier `/boot9strap/` sur votre carte SD
+1. Copiez `SafeB9SInstaller.bin` depuis le fichier `.zip` de SafeB9SInstaller à la racine de votre carte SD
1. Copiez `usm.bin` depuis l'archive `unSAFE_MODE.zip` vers la racine de votre carte SD
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Lorsque votre console vous demande "Paramétrer la connexion Internet de la console ?", sélectionnez "Paramétrer"
1. Dans le menu suivant, accédez à `Connexion 1` -> `Modifier` -> `Page suivante (flèche de droite)` -> `Serveur proxy` -> `Paramètres avancés`
+ Voici une [représentation visuelle](https://uwuu.ca/images/safemode_highlighted.png)
-1. Une fois que vous voyez `B9S install SUCCESS` sur l'écran du haut, appuyez sur n'importe quel bouton pour redémarrer sur le menu de configuration de Luma
+1. Si l'exploit a réussi, votre console devrait avoir démarré sur SafeB9SInstaller
-#### Section IV - Configuration de Luma3DS
+#### Section IV - Installing boot9strap
+
+1. Lorsque vous y êtes invité, entrez la combinaison de touches indiquée sur l'écran supérieur pour installer boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuration de Luma3DS
1. Votre console va redémarrer dans la configuration de Luma3DS
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ Sur la page suivante, vous copierez Luma3DS vers la mémoire interne pour que vous puissiez démarrer sans carte SD.
-#### Section V - Restauration des profils de connexion WiFi
+#### Section VI - Restoring WiFi Configuration Profiles
1. Lancez les Paramètres de la console
1. Naviguez vers`Gestion des données` -> `DSiWare`
diff --git a/_pages/fr_FR/seedminer.txt b/_pages/fr_FR/seedminer.txt
index 1e0c49a539..3a1bf148f7 100644
--- a/_pages/fr_FR/seedminer.txt
+++ b/_pages/fr_FR/seedminer.txt
@@ -20,7 +20,7 @@ Cette méthode utilise une carte graphique puissante pour effectuer les calculs
1. Naviguez vers le dossier `Nintendo 3DS` de votre carte SD
1. Copiez le nom du dossier qui fait 32 caractères de long que vous voyez dans Nintendo 3DS
+ N'allez plus dans aucun dossier
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/fr_FR/updating-b9s.txt b/_pages/fr_FR/updating-b9s.txt
index 2d5fb53c08..aad2a63b8e 100644
--- a/_pages/fr_FR/updating-b9s.txt
+++ b/_pages/fr_FR/updating-b9s.txt
@@ -14,7 +14,7 @@ Bien que nous pensons que le custom firmware est sûr pour un utilisation en lig
## Ce dont vous avez besoin
* La dernière version de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* La dernière version de [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; pas le fichier `devkit`, ni le fichier `ntr`)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* La dernière version de [Luma3DS] (https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/he_IL/a9lh-to-b9s.txt b/_pages/he_IL/a9lh-to-b9s.txt
index 07b5d9bae4..6d3b04ab30 100644
--- a/_pages/he_IL/a9lh-to-b9s.txt
+++ b/_pages/he_IL/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ While we believe that custom firmware is safe for online use, there have been on
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### הנחיות
#### חלק I - הכנות
diff --git a/_pages/he_IL/finalizing-setup.txt b/_pages/he_IL/finalizing-setup.txt
index f98bf422fa..80f194fc63 100644
--- a/_pages/he_IL/finalizing-setup.txt
+++ b/_pages/he_IL/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/he_IL/flashing-ntrboot-(3ds-multi-system).txt b/_pages/he_IL/flashing-ntrboot-(3ds-multi-system).txt
index 39da14cff0..5ae46cf7c3 100644
--- a/_pages/he_IL/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/he_IL/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ title: "צריבת ntrboot (שתי מערכות 3DS)"
+ שתי קונסולות ממשפחת ה3DS
+ **3DS המקור**: הקונסולה ממשפחת ה3DS שכבר מריצה את boot9strap
+ **3DS היעד**: הקונסולה על הקושחה המקורית
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### הנחיות
diff --git a/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt b/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt
index a2013a3fb7..4c9ed88475 100644
--- a/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/he_IL/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ title: "צריבת ntrboot (מערכת 3DS אחת)"
### What You Need
* כרטיס הפריצה שתומך בntrboot שלכם
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### הנחיות
diff --git a/_pages/he_IL/flashing-ntrboot-(nds).txt b/_pages/he_IL/flashing-ntrboot-(nds).txt
index f9397819ec..f5905a71c0 100644
--- a/_pages/he_IL/flashing-ntrboot-(nds).txt
+++ b/_pages/he_IL/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ title: "צריבת ntrboot (NDS)"
* שתי קונסולות
+ **NDS / NDSL המקור**: הNintendo DS או Nintendo DS Lite שנתמך על ידי הכרטיס פריצה שלכם
+ **3DS היעד**: הקונסולה ממשפחת ה3DS על הקושחה המקורית
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### הנחיות
diff --git a/_pages/he_IL/homebrew-launcher-(soundhax).txt b/_pages/he_IL/homebrew-launcher-(soundhax).txt
index 94419256f1..1bee3bd7cf 100644
--- a/_pages/he_IL/homebrew-launcher-(soundhax).txt
+++ b/_pages/he_IL/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Soundhax (when combined with the Homebrew Launcher) is compatible with versions
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/he_IL/installing-boot9strap-(hardmod).txt b/_pages/he_IL/installing-boot9strap-(hardmod).txt
index 08e086cd9d..4f1bf7c5f4 100644
--- a/_pages/he_IL/installing-boot9strap-(hardmod).txt
+++ b/_pages/he_IL/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ To extract the `.7z` files linked on this page, you will need a file archiver li
### What You Need
* ה NAND שלכם שהוצאתם עם [ההלחמה](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ משתמשי Windows יכולים להשתמש ב`.exe` המקומפל, בעוד שמשתמשי Mac וLinux יצטרכו את [Python 3](https://www.python.org/downloads/) מותקן כדי להריץ את ה`.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt
index e8a917722f..98dc017b59 100644
--- a/_pages/he_IL/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/he_IL/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/he_IL/installing-boot9strap-(ntrboot).txt b/_pages/he_IL/installing-boot9strap-(ntrboot).txt
index 10f6619b0a..e4dd4ca288 100644
--- a/_pages/he_IL/installing-boot9strap-(ntrboot).txt
+++ b/_pages/he_IL/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* מגנט שמפעיל את מצב שינה בקונסולה שלכם (אם יש לכם קונסולה מתקפלת)
* כרטיס הפריצה הצרוב שלכם
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### הנחיות
diff --git a/_pages/he_IL/installing-boot9strap-(pichaxx).txt b/_pages/he_IL/installing-boot9strap-(pichaxx).txt
index 19351d1684..34545312f2 100644
--- a/_pages/he_IL/installing-boot9strap-(pichaxx).txt
+++ b/_pages/he_IL/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/he_IL/installing-boot9strap-(soundhax).txt b/_pages/he_IL/installing-boot9strap-(soundhax).txt
index 252c4d5193..e87fb64187 100644
--- a/_pages/he_IL/installing-boot9strap-(soundhax).txt
+++ b/_pages/he_IL/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. תעברו אל ' / SDCARD ", ואז תפעילו את" < 3 nedwill 2016 "
+ זה עלול לקחת הרבה נסיונות
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/he_IL/installing-boot9strap-(usm).txt b/_pages/he_IL/installing-boot9strap-(usm).txt
index 2e612c84b9..709b89bf89 100644
--- a/_pages/he_IL/installing-boot9strap-(usm).txt
+++ b/_pages/he_IL/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### חלק I - הכנות
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. תכניסו את ה-SD שלכם למחשב
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. תצרו ב-SD שלכם תיקייה חדשה בשם `boot9strap`
+1. תעתיקו את`boot9strap.firm` ואת `boot9strap.firm.sha` מה `.zip` של boot9strap אל תיקיית `/boot9strap/`על כרטיס הSD שלכם
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### חלק IV - הגדרת Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. הקןנסולה שלכם צריכה לאתחל לתפריט ההגדרות של Luma3DS
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/he_IL/seedminer.txt b/_pages/he_IL/seedminer.txt
index 6ddcc5b6c6..7c985de7bf 100644
--- a/_pages/he_IL/seedminer.txt
+++ b/_pages/he_IL/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/he_IL/updating-b9s.txt b/_pages/he_IL/updating-b9s.txt
index f2afae8cf4..e03de8ec8d 100644
--- a/_pages/he_IL/updating-b9s.txt
+++ b/_pages/he_IL/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### הנחיות
diff --git a/_pages/hr_HR/a9lh-to-b9s.txt b/_pages/hr_HR/a9lh-to-b9s.txt
index aa693b8793..d7799c2626 100644
--- a/_pages/hr_HR/a9lh-to-b9s.txt
+++ b/_pages/hr_HR/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/hr_HR/finalizing-setup.txt b/_pages/hr_HR/finalizing-setup.txt
index 955bf39c2e..b117a19abe 100644
--- a/_pages/hr_HR/finalizing-setup.txt
+++ b/_pages/hr_HR/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/hr_HR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/hr_HR/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/hr_HR/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/hr_HR/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/hr_HR/flashing-ntrboot-(3ds-single-system).txt b/_pages/hr_HR/flashing-ntrboot-(3ds-single-system).txt
index 5a75147d11..df642102bd 100644
--- a/_pages/hr_HR/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/hr_HR/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/hr_HR/flashing-ntrboot-(nds).txt b/_pages/hr_HR/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/hr_HR/flashing-ntrboot-(nds).txt
+++ b/_pages/hr_HR/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/hr_HR/homebrew-launcher-(soundhax).txt b/_pages/hr_HR/homebrew-launcher-(soundhax).txt
index 49c0f81808..dbdc77d3d1 100644
--- a/_pages/hr_HR/homebrew-launcher-(soundhax).txt
+++ b/_pages/hr_HR/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/hr_HR/installing-boot9strap-(hardmod).txt b/_pages/hr_HR/installing-boot9strap-(hardmod).txt
index a86c8d9d62..9ba5a31b79 100644
--- a/_pages/hr_HR/installing-boot9strap-(hardmod).txt
+++ b/_pages/hr_HR/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/hr_HR/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt
index 2bfeac8d82..29df08162c 100644
--- a/_pages/hr_HR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/hr_HR/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/hr_HR/installing-boot9strap-(pichaxx).txt b/_pages/hr_HR/installing-boot9strap-(pichaxx).txt
index 9f58ed6198..c32ee66b58 100644
--- a/_pages/hr_HR/installing-boot9strap-(pichaxx).txt
+++ b/_pages/hr_HR/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/hr_HR/installing-boot9strap-(soundhax).txt b/_pages/hr_HR/installing-boot9strap-(soundhax).txt
index 3b239e54e4..452c36489d 100644
--- a/_pages/hr_HR/installing-boot9strap-(soundhax).txt
+++ b/_pages/hr_HR/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/hr_HR/installing-boot9strap-(usm).txt b/_pages/hr_HR/installing-boot9strap-(usm).txt
index 6b22c1f513..d42d29eafa 100644
--- a/_pages/hr_HR/installing-boot9strap-(usm).txt
+++ b/_pages/hr_HR/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/hr_HR/seedminer.txt b/_pages/hr_HR/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/hr_HR/seedminer.txt
+++ b/_pages/hr_HR/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/hr_HR/updating-b9s.txt b/_pages/hr_HR/updating-b9s.txt
index 656f51592a..160e4d1eb6 100644
--- a/_pages/hr_HR/updating-b9s.txt
+++ b/_pages/hr_HR/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/hu_HU/a9lh-to-b9s.txt b/_pages/hu_HU/a9lh-to-b9s.txt
index 01dc8f6d50..47a1c0b545 100644
--- a/_pages/hu_HU/a9lh-to-b9s.txt
+++ b/_pages/hu_HU/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Vedd figyelembe, hogy New 3DS esetében a `secret_sector.bin` fájlra az arm9loa
* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója
* A [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) v7.0.5 verziója *(a `.7z` fájl)*
* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Lépések
#### I. rész - Előkészületek
diff --git a/_pages/hu_HU/finalizing-setup.txt b/_pages/hu_HU/finalizing-setup.txt
index a66c3c59a0..fb037b1e7a 100644
--- a/_pages/hu_HU/finalizing-setup.txt
+++ b/_pages/hu_HU/finalizing-setup.txt
@@ -167,7 +167,7 @@ Néhány billentyű kombináció amit ismerned kell:
- Indításkor előhozhatod a Luma3DS konfigurációs menüjét a (Select) gomb lenyomva tartásával.
- Indításkor előhozhatod a GodMode9-et, vagy ha több payload van a `/luma/payloads/` mappában a Luma3DS chainloader-t a (Select) gomb lenyomva tartásával.
- Alapból a (Bal váll) + (D-pad le) + (Select) gombok megnyomásával 3DS módban a Rosalina menü megnyílik, ahol többek közt megnézhetsz rendszer információkat, csinálhatsz képernyő képeket, és engedélyezhetsz csalásokat. Ezt lehet módosítani a Rosalina menüben.
-- A (Start) + (Select) + (X) lenyomva tartása indítás közben dumpolni foja a `boot9.bin`, `boot11.bin`, és `otp.bin` fájlokat a `boot9strap` mappába az SD kártyádon. A `boot9strap` mappa létrehozásra kerül ha még nem létezne.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/hu_HU/flashing-ntrboot-(3ds-multi-system).txt b/_pages/hu_HU/flashing-ntrboot-(3ds-multi-system).txt
index 4dc2730272..8aa7fbb74b 100644
--- a/_pages/hu_HU/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/hu_HU/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol
* Két eszköz a 3DS családból
+ **A forrás 3DS**: egy eszköz a 3DS családból, amin már boot9strap fut
+ **A cél 3DS**: egy eszköz, ami gyári állapotban van
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* Az [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest) legújabb verziója
### Lépések
diff --git a/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt b/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt
index 88682ddb45..4b9389bee1 100644
--- a/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/hu_HU/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol
### Amire szükséged lesz
* Olyan flashkártya, ami támogatja az ntrboot-ot
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* A [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) legújabb kiadása
### Lépések
diff --git a/_pages/hu_HU/flashing-ntrboot-(nds).txt b/_pages/hu_HU/flashing-ntrboot-(nds).txt
index 3651ad185b..cfbdf6e340 100644
--- a/_pages/hu_HU/flashing-ntrboot-(nds).txt
+++ b/_pages/hu_HU/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési fol
* Két készülék
+ **A forrás NDS / NDSL**: egy Nintendo DS vagy Nintendo DS Lite, ami támogatja a flashkártyádat
+ **A cél 3DS**: egy eszköz a 3DS családból, ami gyári állapotban van
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* A [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest) legújabb kiadása
### Lépések
diff --git a/_pages/hu_HU/formatting-sd-(linux).txt b/_pages/hu_HU/formatting-sd-(linux).txt
index 2507acff36..da22a73802 100644
--- a/_pages/hu_HU/formatting-sd-(linux).txt
+++ b/_pages/hu_HU/formatting-sd-(linux).txt
@@ -24,13 +24,13 @@ NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT
mmcblk0 179:0 0 3,8G 0 disk
└─mmcblk0p1 179:1 0 3,7G 0 part /run/media/user/FFFF-FFFF
```
-1. Take note of the device name. In our example above, it was `mmcblk0p1`
+1. Jegyezd fel az eszköz nevét. A fenti példánkban ez `mmcblk0p1` volt
+ Ha az `RO` 1-re állított, ellenőrizd, hogy a zároló csúszka nincs-e lehúzva
1. Nyomj CTRL + C-t a menüből kilépéshez
1. Írd be a következőt az SD kártyádhoz:
- - 2GB or lower: `sudo mkfs.fat /dev/(device name from above) -s 64 -F 16`
+ - 2GB vagy kisebb: `sudo mkfs.fat /dev/(az eszköz neve fentről) -s 64 -F 16`
- Ez létrehoz egy FAT16 partíciót 32 KB cluster mérettel az SD kártyán
- - 4GB - 128GB: `sudo mkfs.fat /dev/(device name from above) -s 64 -F 32`
+ - 4GB - 128GB: `sudo mkfs.fat /dev/(az eszköz neve fentről) -s 64 -F 32`
- Ez létrehoz egy FAT32 partíciót 32 KB cluster mérettel az SD kártyán
- - 128GB or higher: `sudo mkfs.fat /dev/(device name from above) -s 128 -F 32`
+ - 128GB vagy nagyobb: `sudo mkfs.fat /dev/(az eszköz neve fentről) -s 128 -F 32`
- Ez létrehoz egy FAT32 partíciót 64 KB cluster mérettel az SD kártyán
diff --git a/_pages/hu_HU/homebrew-launcher-(soundhax).txt b/_pages/hu_HU/homebrew-launcher-(soundhax).txt
index df58aa4486..b8420174bc 100644
--- a/_pages/hu_HU/homebrew-launcher-(soundhax).txt
+++ b/_pages/hu_HU/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Bizonyosodj meg róla, hogy az eszközödön engedélyezve van a vezeték nélk
* A [Soundhax](http://soundhax.com) legújabb kiadása *(a régiódnak, készülékednek és rendszer verziódnak megfelelő változat)*
+ Ha a Soundhax a böngésződben nem lejátszható videónak tűnik, nyomj Ctrl+S vagy Cmd+S gombokat a gépedre mentéséhez
* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* A [safehax](https://github.com/TiniVi/safehax/releases/latest) legújabb kiadása *(a`.3dsx` fájl)*
* A [udsploit](https://github.com/smealum/udsploit/releases/latest) legújabb kiadása
* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója
diff --git a/_pages/hu_HU/installing-boot9strap-(hardmod).txt b/_pages/hu_HU/installing-boot9strap-(hardmod).txt
index b46371518d..4f60618cfd 100644
--- a/_pages/hu_HU/installing-boot9strap-(hardmod).txt
+++ b/_pages/hu_HU/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ Ez működni fog a New 3DS, a New 2DS, az Old 3DS, és az Old 2DS konzolok *öss
### Amire szükséged lesz
* A NAND-odról készített képfájl, amit a [hardmod](https://gbatemp.net/threads/414498/) nyersz ki a konzolból
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* A [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest) legújabb kiadása
+ A Windows felhasználók használhatják az előre összeállított `.exe`-t, míg a Mac és Linux felhasználóknak [Python 3](https://www.python.org/downloads/)-ra lesz szükségük, hogy futtatni tudják a mellékelt `.py` szkriptet
* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója
diff --git a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt
index b51e3eaa2c..782670f05e 100644
--- a/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/hu_HU/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ A **forrás 3DS**-en (a 3DS egyedi firmware-rel):
A **cél 3DS**-en (a 3DS, amit módosítani szeretnél):
* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* A [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb kiadása
#### I. rész - Előkészületi munka (forrás 3DS)
diff --git a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
index 2c41ec1a3d..894aa40a44 100644
--- a/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
+++ b/_pages/hu_HU/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme
* Egy mágnes, ami alvó üzemmódot idéz elő a készülékedben (ha összecsukható modellel rendelkezel)
* Egy flashkártya, amire korábban ntrboot-ot flasheltél
* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója
### Lépések
diff --git a/_pages/hu_HU/installing-boot9strap-(pichaxx).txt b/_pages/hu_HU/installing-boot9strap-(pichaxx).txt
index 7ba4d74f17..66bc316d42 100644
--- a/_pages/hu_HU/installing-boot9strap-(pichaxx).txt
+++ b/_pages/hu_HU/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ Ennek a folyamatnak a során a Pokémon Picross mentése felülírásra kerül,
+ Az SD kártyád be kell legyen helyezve az eszközödbe a Pokémon Picross telepítéséhez
* A `movable.sed` fájlodra a [Seedminer](seedminer)-ből
* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója
* A [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) legújabb kiadása
diff --git a/_pages/hu_HU/installing-boot9strap-(soundhax).txt b/_pages/hu_HU/installing-boot9strap-(soundhax).txt
index 24bb5c5253..e399705c4d 100644
--- a/_pages/hu_HU/installing-boot9strap-(soundhax).txt
+++ b/_pages/hu_HU/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ A Soundhax (amikor universal-otherapp-pal használjuk) kompatibilis az 1.0.0-s v
* A [Soundhax](http://soundhax.com) legújabb kiadása *(a régiódnak, készülékednek és rendszer verziódnak megfelelő változat)*
+ Ha a Soundhax a böngésződben nem lejátszható videónak tűnik, nyomj Ctrl+S vagy Cmd+S gombokat a gépedre mentéséhez
* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója
* A [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest) legújabb kiadása
@@ -50,7 +50,6 @@ A Soundhax (amikor universal-otherapp-pal használjuk) kompatibilis az 1.0.0-s v
1. Válaszd a `/SDCARD` mappát, majd játszd le a "<3 nedwill 2016" nevű hangfájlt
+ Ez lehet, hogy csak sokadjára fog működni
+ Ha lefagyna, kényszerítsd leállásra a konzolt a bekapcsológomb lenyomva tartásával, majd próbálkozz újra
- + Ha konzolod piros és fehér képernyőt mutat *és* a konzol verziód 9.4.0, 9.5.0, vagy 9.6.0, próbáld követni a [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) útmutatót
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/hu_HU/installing-boot9strap-(usm).txt b/_pages/hu_HU/installing-boot9strap-(usm).txt
index 0b80f22aef..790dd73561 100644
--- a/_pages/hu_HU/installing-boot9strap-(usm).txt
+++ b/_pages/hu_HU/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ Ha a (Jobb/Bal Váll), (D-Pad Fel) vagy (A) gombjaid nem működnek, [a Seedmine
### Amire szükséged lesz
* A `movable.sed` fájlodra a [Seedminer](seedminer)-ből
+* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója
+
#### I. rész - Előkészületek
1. Ha a konzolod be van kapcsolva, most kapcsold ki
@@ -34,6 +37,9 @@ Ha a (Jobb/Bal Váll), (D-Pad Fel) vagy (A) gombjaid nem működnek, [a Seedmine
1. Helyezd az SD kártyád a számítógépbe
1. Másold át a `boot.firm` és `boot.3dsx` fájlt a Luma3DS `.zip`-ből az SD kártya gyökerébe
+ Az SD kártya gyökere a kezdőkönyvtárt jelenti az SD kártyán, ahol látható a Nintendo 3DS könyvtár, de nem vagyunk benne
+1. Hozz létre egy mappát `boot9strap` néven az SD kártya gyökerében
+1. Másold át a `boot9strap.firm` fájlt és a `boot9strap.firm.sha` fájlt a boot9strap `.zip` fájlból az SD kártyád `/boot9strap/` mappájába
+1. Másold át a `SafeB9SInstaller.bin` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád gyökerébe
1. Másold át a `usm.bin` fájlt az `unSAFE_MODE.zip`-ből az SD kártya gyökerébe
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ Ha a (Jobb/Bal Váll), (D-Pad Fel) vagy (A) gombjaid nem működnek, [a Seedmine
1. Amikor megkérdezésre kerül, hogy "Would you like to configure Internet settings?", válassz "Yes"-t
1. A következő menüben navigálj a `Connection 1` -> `Change Settings` -> `Next Page (jobb nyíl)` -> `Proxy Settings` -> `Detailed Setup` menüponthoz
+ Itt egy [vizuális reprezentáció](https://uwuu.ca/images/safemode_highlighted.png)
-1. Amint azt látod a felső képernyőn, hogy `B9S install SUCCESS` nyomj meg egy billentyűt az Luma Configuration-ba rebootoláshoz
+1. Ha az exploit sikerrel járt, készüléked bebootolja a SafeB9SInstallert
-#### IV. rész - Luma3DS konfigurálása
+#### Section IV - Installing boot9strap
+
+1. Ha kéri, akkor nyomd meg sorban azokat a gombokat, amiket kijelez a felső képernyőn, hogy telepíthesd a boot9strap-et
+ + If the top screen is blank, power off your device and re-do Section III
+1. Ha ez elkészült, nyomd meg az (A) gombot az eszközöd újraindításához
+
+#### V. rész - Luma3DS konfigurálása
1. A készülékednek az előzőekben a Luma3DS-be kellett bootolnia
+ Bármikor elérheted a Luma3DS konfigurációs menüt kikapcsolással, majd a SELECT gomb nyomva tartása melletti bekapcsolással
@@ -86,7 +98,7 @@ Ezen a ponton a konzolod alapértelmezetten bebootol a Luma3DS-be egészen addig
+ A Luma3DS nem néz ki másként, mint a normál HOME Menü. Ha a konzolod bebootolt a HOME Menübe, akkor egyedi firmware-t futtat.
+ A következő oldalon be fogod másolni a Luma3DS-t a belső memóriába, így SD kártya nélkül is fogsz tudni bootolni.
-#### V. rész - A WiFi Configuration Profiles visszaállítása
+#### Section VI - Restoring WiFi Configuration Profiles
1. Lépj be a System Settings-be a készülékeden
1. Navigálj ide: `Data Management` -> `DSiWare`
diff --git a/_pages/hu_HU/seedminer.txt b/_pages/hu_HU/seedminer.txt
index 138836238f..8ee2d5d165 100644
--- a/_pages/hu_HU/seedminer.txt
+++ b/_pages/hu_HU/seedminer.txt
@@ -20,7 +20,7 @@ Ez a módszer egy erős grafikus kártyát használ a szükséges számítások
1. Lépj be az SD kártyád `Nintendo 3DS` könyvtárába
1. Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz
+ Nem menj beljebb több mappát
- + Ha több mappát látsz, kövesd [ezeket a lépéseket](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/hu_HU/updating-b9s.txt b/_pages/hu_HU/updating-b9s.txt
index 92b8ac7855..1e908283ce 100644
--- a/_pages/hu_HU/updating-b9s.txt
+++ b/_pages/hu_HU/updating-b9s.txt
@@ -14,7 +14,7 @@ Habár hiszünk abban, hogy az egyedi firmware online használata biztonságos,
### Amire szükséged lesz
* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása
-* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(`boot9strap-1.3.zip`; nem a `devkit` fájl, nem az `ntr` fájl)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Az [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest) legújabb verziója
### Lépések
diff --git a/_pages/id_ID/a9lh-to-b9s.txt b/_pages/id_ID/a9lh-to-b9s.txt
index aa693b8793..d7799c2626 100644
--- a/_pages/id_ID/a9lh-to-b9s.txt
+++ b/_pages/id_ID/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/id_ID/finalizing-setup.txt b/_pages/id_ID/finalizing-setup.txt
index 955bf39c2e..b117a19abe 100644
--- a/_pages/id_ID/finalizing-setup.txt
+++ b/_pages/id_ID/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/id_ID/flashing-ntrboot-(3ds-multi-system).txt b/_pages/id_ID/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/id_ID/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/id_ID/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt b/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt
index 5a75147d11..df642102bd 100644
--- a/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/id_ID/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/id_ID/flashing-ntrboot-(nds).txt b/_pages/id_ID/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/id_ID/flashing-ntrboot-(nds).txt
+++ b/_pages/id_ID/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/id_ID/homebrew-launcher-(soundhax).txt b/_pages/id_ID/homebrew-launcher-(soundhax).txt
index 49c0f81808..dbdc77d3d1 100644
--- a/_pages/id_ID/homebrew-launcher-(soundhax).txt
+++ b/_pages/id_ID/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/id_ID/installing-boot9strap-(hardmod).txt b/_pages/id_ID/installing-boot9strap-(hardmod).txt
index a86c8d9d62..9ba5a31b79 100644
--- a/_pages/id_ID/installing-boot9strap-(hardmod).txt
+++ b/_pages/id_ID/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/id_ID/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/id_ID/installing-boot9strap-(ntrboot).txt b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
index 2bfeac8d82..29df08162c 100644
--- a/_pages/id_ID/installing-boot9strap-(ntrboot).txt
+++ b/_pages/id_ID/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/id_ID/installing-boot9strap-(pichaxx).txt b/_pages/id_ID/installing-boot9strap-(pichaxx).txt
index 9f58ed6198..c32ee66b58 100644
--- a/_pages/id_ID/installing-boot9strap-(pichaxx).txt
+++ b/_pages/id_ID/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/id_ID/installing-boot9strap-(soundhax).txt b/_pages/id_ID/installing-boot9strap-(soundhax).txt
index 3b239e54e4..452c36489d 100644
--- a/_pages/id_ID/installing-boot9strap-(soundhax).txt
+++ b/_pages/id_ID/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/id_ID/installing-boot9strap-(usm).txt b/_pages/id_ID/installing-boot9strap-(usm).txt
index 6b22c1f513..d42d29eafa 100644
--- a/_pages/id_ID/installing-boot9strap-(usm).txt
+++ b/_pages/id_ID/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/id_ID/seedminer.txt b/_pages/id_ID/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/id_ID/seedminer.txt
+++ b/_pages/id_ID/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/id_ID/updating-b9s.txt b/_pages/id_ID/updating-b9s.txt
index 656f51592a..160e4d1eb6 100644
--- a/_pages/id_ID/updating-b9s.txt
+++ b/_pages/id_ID/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/it_IT/a9lh-to-b9s.txt b/_pages/it_IT/a9lh-to-b9s.txt
index ff634b6184..42c03037fc 100644
--- a/_pages/it_IT/a9lh-to-b9s.txt
+++ b/_pages/it_IT/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Solo su New 3DS, il file `secret_sector.bin` è necessario per ripristinare le m
* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* La versione v7.0.5 di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(il file `.7z`)*
* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Istruzioni
#### Sezione I - Preparazione
diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt
index 8f5da1b450..d5277694e3 100644
--- a/_pages/it_IT/finalizing-setup.txt
+++ b/_pages/it_IT/finalizing-setup.txt
@@ -167,7 +167,7 @@ Ecco alcune combinazioni di tasti che dovresti conoscere:
- Tenere premuto (Select) all'accensione della console avvierà il menu di configurazione di Luma3DS.
- Tenere premuto (Start) all'accensione avvierà GodMode9 o, se hai più payload in `/luma/payloads/`, il chainloader Luma3DS.
- Per impostazione predefinita, premere (L) + (Giù) + (Select) in modalità 3DS aprirà il menu di Rosalina, dove è possibile controllare le informazioni di sistema, catturare screenshot, abilitare i trucchi e altro ancora. Si può modificare da Rosalina stesso.
-- Tenere premuto (Start) + (Select) + (X) all'accensione scaricherà i file `boot9.bin`, `boot11.bin`, e `otp.bin` nella cartella `boot9strap` della tua scheda SD. La cartella `boot9strap` verrà creata se non esiste già.
+- Tenendo premuto (Start) + (Select) + (X) all'avvio, il LED di notifica mostrerà un colore a scopo di debug. Consulta la lista nel [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4).
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/it_IT/flashing-ntrboot-(3ds-multi-system).txt b/_pages/it_IT/flashing-ntrboot-(3ds-multi-system).txt
index 063552720f..0b89cb191f 100644
--- a/_pages/it_IT/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/it_IT/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Tieni presente che in rare circostanze è possibile **brickare** una flashcart c
* Due console 3DS
+ **Il 3DS di partenza**: la console della famiglia 3DS che ha già installato boot9strap
+ **Il 3DS di destinazione**: la console con versione del software originale
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* L'ultima versione di [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Istruzioni
diff --git a/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt b/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt
index 508aeecb0f..cf13aa3a8f 100644
--- a/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/it_IT/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Tieni presente che in rare circostanze è possibile **brickare** una flashcart c
### Cosa serve
* La flashcart compatibile con ntrboot
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* L'ultima versione di [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Istruzioni
diff --git a/_pages/it_IT/flashing-ntrboot-(nds).txt b/_pages/it_IT/flashing-ntrboot-(nds).txt
index ed1045d588..e32d67aed7 100644
--- a/_pages/it_IT/flashing-ntrboot-(nds).txt
+++ b/_pages/it_IT/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Tieni presente che in rare circostanze è possibile **brickare** una flashcart c
* Due console
+ **Il NDS / NDSL di partenza**: il Nintendo DS o Nintendo DS Lite compatibile con la tua flashcart
+ **Il 3DS di destinazione**: la console della famiglia 3DS con versione del software originale
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* L'ultima versione di [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Istruzioni
diff --git a/_pages/it_IT/homebrew-launcher-(soundhax).txt b/_pages/it_IT/homebrew-launcher-(soundhax).txt
index d083948e64..677a7a9b8e 100644
--- a/_pages/it_IT/homebrew-launcher-(soundhax).txt
+++ b/_pages/it_IT/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Assicurati che la comunicazione wireless sia attiva dato che udsploit (usato nel
* L'ultima versione di [Soundhax](http://soundhax.com) *(adatta alla regione, tipo e versione della console)*
+ Se Soundhax appare nel tuo browser come un video non riproducibile, premi Ctrl+S o Cmd+S per salvarlo sul tuo computer
* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* L'ultima versione di [safehax](https://github.com/TiniVi/safehax/releases/latest) *(il file `.3dsx`)*
* L'ultima versione di [udsploit](https://github.com/smealum/udsploit/releases/latest)
* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/it_IT/installing-boot9strap-(hardmod).txt b/_pages/it_IT/installing-boot9strap-(hardmod).txt
index 7a1031d5c9..8b243b0ece 100644
--- a/_pages/it_IT/installing-boot9strap-(hardmod).txt
+++ b/_pages/it_IT/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ Questo processo funziona su New 3DS, New 2DS, Old 3DS e Old 2DS su *tutte* le ve
### Cosa serve
* Il file immagine della tua NAND estratto tramite [hardmod](https://gbatemp.net/threads/414498/)
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* L'ultima versione di [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Gli utenti Windows possono usare il file `.exe` precompilato, mentre gli utenti Mac e Linux dovranno installare [Python 3](https://www.python.org/downloads/) per avviare il file `.py`
* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt
index 5b732746ff..6081979fd3 100644
--- a/_pages/it_IT/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/it_IT/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ Sul **3DS di partenza** (il 3DS con custom firmware):
Sul **3DS di destinazione** (il 3DS che stai cercando di modificare):
* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* L'ultima versione di [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Sezione I - Preparazione (3DS di partenza)
diff --git a/_pages/it_IT/installing-boot9strap-(ntrboot).txt b/_pages/it_IT/installing-boot9strap-(ntrboot).txt
index f5716a9e05..5da19e9bf8 100644
--- a/_pages/it_IT/installing-boot9strap-(ntrboot).txt
+++ b/_pages/it_IT/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ Per usare i link [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) di quest
* Un magnete che ponga la console in modalità riposo (in caso sia del tipo a chiusura)
* La flashcart con installato ntrboot
* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Istruzioni
diff --git a/_pages/it_IT/installing-boot9strap-(pichaxx).txt b/_pages/it_IT/installing-boot9strap-(pichaxx).txt
index b8a901d6f0..04c127cac5 100644
--- a/_pages/it_IT/installing-boot9strap-(pichaxx).txt
+++ b/_pages/it_IT/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ Questo processo sovrascriverà il tuo file di salvataggio per Pokémon Picross,
+ La scheda SD deve essere inserita nella console per poter installare Pokémon Picross
* Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer)
* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* L'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/it_IT/installing-boot9strap-(soundhax).txt b/_pages/it_IT/installing-boot9strap-(soundhax).txt
index 3e8d3a1d5d..a893819038 100644
--- a/_pages/it_IT/installing-boot9strap-(soundhax).txt
+++ b/_pages/it_IT/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (combinato a universal-otherapp) è compatibile con le versioni del sof
* L'ultima versione di [Soundhax](http://soundhax.com) *(adatta alla regione, tipo e versione della console)*
+ Se Soundhax appare nel tuo browser come un video non riproducibile, premi Ctrl+S o Cmd+S per salvarlo sul tuo computer
* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* L'ultima versione di [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (combinato a universal-otherapp) è compatibile con le versioni del sof
1. Seleziona `/Scheda SD`, quindi avvia "<3 nedwill 2016"
+ Potrebbero essere necessari più tentativi
+ Se la console dovesse bloccarsi, forzane lo spegnimento tenendo premuto il pulsante di accensione, quindi riprova
- + Se la console visualizza una schermata bianca e rossa *e* la console è alla versione di sistema 9.4.0, 9.5.0, o 9.6.0, prova a seguire [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/it_IT/installing-boot9strap-(usm).txt b/_pages/it_IT/installing-boot9strap-(usm).txt
index cc432005ac..e34275e204 100644
--- a/_pages/it_IT/installing-boot9strap-(usm).txt
+++ b/_pages/it_IT/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare [una versione
### Cosa serve
* Il tuo file `movable.sed` dalla sezione [Seedminer](seedminer)
+* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Sezione I - Preparazione
1. Se la tua console è accesa, spegnila
@@ -34,6 +37,9 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare [una versione
1. Inserisci la scheda SD nel tuo computer
1. Copia i file `boot.firm` e `boot.3dsx` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD
+ La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+1. Crea una cartella chiamata `boot9strap` nella directory principale della tua scheda SD
+1. Copia i file `boot9strap.firm` e `boot9strap.firm.sha` dall'archivio `.zip` di boot9strap nella cartella `/boot9strap/` della tua scheda SD
+1. Copia il file `SafeB9SInstaller.bin` dall'archivio `.zip` di SafeB9SInstaller nella directory principale della tua scheda SD
1. Copia il file `usm.bin` da `unSAFE_MODE.zip` nella directory principale della tua scheda SD
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare [una versione
1. Alla richiesta "Vuoi configurare le Impostazioni internet?", seleziona "Sì"
1. Nel menu successivo, entra in `Connessione 1` -> `Modifica` -> pagina successiva (la freccia a destra) -> `Impostazioni proxy` -> `Impostazioni avanzate`
+ Ecco una [rappresentazione visiva](https://uwuu.ca/images/safemode_highlighted.png)
-1. Quando vedi la scritta `B9S install SUCCESS` sullo schermo superiore, premi qualunque tasto per avviare la configurazione di Luma
+1. Se l'exploit è andato a buon fine, la tua console avvierà SafeB9SInstaller
-#### Sezione IV - Configurare Luma3DS
+#### Sezione IV - Installazione di boot9strap
+
+1. Quando richiesto, inserisci la combinazione di tasti richiesta sullo schermo superiore per installare boot9strap
+ + Se la schermata superiore è vuota, spegni la tua console e ripeti la Sezione III
+1. Una volta completato il processo, premi (A) per riavviare la tua console
+
+#### Sezione V - Configurare Luma3DS
1. La tua console dovrebbe riavviarsi all'interno del menu di configurazione di Luma3DS
+ È possibile accedere al menu di configurazione di Luma3DS in qualsiasi momento spegnendo la console e riaccendendola tenendo premuto il pulsante SELECT
@@ -86,7 +98,7 @@ A questo punto, la console avvierà Luma3DS finché la scheda SD rimane inserita
+ Luma3DS non è diverso dal normale menu HOME. Se la console avvia il menu HOME, vuol dire che sta eseguendo il custom firmware.
+ Nella pagina successiva, copierai Luma3DS nella memoria interna per poter avviarlo senza una scheda SD.
-#### Sezione V - Ripristino dei Profili di Connessione WiFi
+#### Sezione VI - Ripristino dei Profili di Connessione WiFi
1. Avvia "Impostazioni della console"
1. Entra in `Gestione dati` -> `DSiWare`
diff --git a/_pages/it_IT/seedminer.txt b/_pages/it_IT/seedminer.txt
index 9ede935f48..27686a24f0 100644
--- a/_pages/it_IT/seedminer.txt
+++ b/_pages/it_IT/seedminer.txt
@@ -20,7 +20,7 @@ Questo metodo utilizza una scheda grafica di fascia alta per eseguire i calcoli
1. Entra nella cartella `Nintendo 3DS` della tua scheda SD
1. Copia la stringa di 32 caratteri del nome della cartella presente dentro il Nintendo 3DS
+ Non entrare in ulteriori cartelle
- + Se vedi più cartelle, segui [queste istruzioni](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + Se vedi più cartelle di 32 caratteri, segui [queste istruzioni](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/it_IT/updating-b9s.txt b/_pages/it_IT/updating-b9s.txt
index ee93cf7c81..f42bb78a7b 100644
--- a/_pages/it_IT/updating-b9s.txt
+++ b/_pages/it_IT/updating-b9s.txt
@@ -14,7 +14,7 @@ Nonostante riteniamo che l'uso di un custom firmware sia sicuro anche online, ci
### Cosa serve
* L'ultima versione di [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; non il file `devkit`, né il file `ntr`)*
+* L'ultima versione di [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* L'ultima versione di [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Istruzioni
diff --git a/_pages/ja_JP/a9lh-to-b9s.txt b/_pages/ja_JP/a9lh-to-b9s.txt
index 3e9a6b18b6..c5477fd60d 100644
--- a/_pages/ja_JP/a9lh-to-b9s.txt
+++ b/_pages/ja_JP/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/)
* バージョンがv7.0.5の [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(拡張子が".7z"のファイル)
* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### 手順
#### セクション I - 準備
diff --git a/_pages/ja_JP/finalizing-setup.txt b/_pages/ja_JP/finalizing-setup.txt
index f5b6df4079..d291b0de56 100644
--- a/_pages/ja_JP/finalizing-setup.txt
+++ b/_pages/ja_JP/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ja_JP/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ja_JP/flashing-ntrboot-(3ds-multi-system).txt
index 274e7882c0..7499c4851e 100644
--- a/_pages/ja_JP/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/ja_JP/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ title: "ntrbootのフラッシュ (3DSマルチシステム)"
* 2台の3DSファミリーの本体
+ **ソースとなる3DS**: すでにboot9strapを実行している3DSファミリデバイス
+ **ターゲットとなる3DS**: ストックファームウェアのデバイス
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 最新安定版 [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### 手順
diff --git a/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt b/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt
index cbbd18d59b..510d0b0dcc 100644
--- a/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/ja_JP/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ title: "ntrbootのフラッシュ (3DSシングルシステム)"
### 必要なもの
* ntrbootと互換性のあるフラッシュカード
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 手順
diff --git a/_pages/ja_JP/flashing-ntrboot-(nds).txt b/_pages/ja_JP/flashing-ntrboot-(nds).txt
index b41dbe40f4..14e89fa7e6 100644
--- a/_pages/ja_JP/flashing-ntrboot-(nds).txt
+++ b/_pages/ja_JP/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ title: "ntrbootのフラッシュ (NDS)"
* 2台の本体
+ **ソースとなるNDS / NDSL**: フラッシュカードと互換性のあるNintendo DSもしくはNintendo DS Lite
+ **ターゲットとなる3DS**: 3DSファミリーのストックファームウェアのデバイス
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 手順
diff --git a/_pages/ja_JP/homebrew-launcher-(soundhax).txt b/_pages/ja_JP/homebrew-launcher-(soundhax).txt
index 4b9a2b00ac..908a1dbf20 100644
--- a/_pages/ja_JP/homebrew-launcher-(soundhax).txt
+++ b/_pages/ja_JP/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Udsploit (次のページで使用) は、ワイヤレスモジュールを有
* 最新バージョンの [Soundhax](http://soundhax.com/) *(本体に合ったリージョンとバージョンを選択してください)*
+ 再生できないビデオとしてブラウザにSoundhaxが表示される場合は、Ctrl+SまたはCmd+Sを押してコンピュータに保存します
* 最新安定版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新安定版 [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* 最新のリリースの [udsploit](https://github.com/smealum/udsploit/releases/latest)
* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/)
diff --git a/_pages/ja_JP/installing-boot9strap-(hardmod).txt b/_pages/ja_JP/installing-boot9strap-(hardmod).txt
index 3d29de6646..5e8f430055 100644
--- a/_pages/ja_JP/installing-boot9strap-(hardmod).txt
+++ b/_pages/ja_JP/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
### 必要なもの
* [hardmod](https://gbatemp.net/threads/414498/)で取得したNANDイメージ
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
[hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)の最新のバージョン
+ Windowsユーザーはコンパイルされた`.exe`を使用できますが、MacとLinuxユーザーは`.py`を実行するには[Python 3](https://www.python.org/downloads/)をインストールする必要があります。
* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/)
diff --git a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt
index 416cb2d7c6..12b361caf6 100644
--- a/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ja_JP/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
index 58e995c41a..cb0c4dab72 100644
--- a/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ja_JP/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* 端末にスリープモードを引き起こす磁石（折りたためる3dsを使用する場合）
* ntrbootがフラッシュされたフラッシュカード
* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/)
### 手順
diff --git a/_pages/ja_JP/installing-boot9strap-(pichaxx).txt b/_pages/ja_JP/installing-boot9strap-(pichaxx).txt
index c86f8876b1..358af048da 100644
--- a/_pages/ja_JP/installing-boot9strap-(pichaxx).txt
+++ b/_pages/ja_JP/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* [Seedminer](seedminer) より作成した、 `movable.sed` ファイル
* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/)
* 最新のリリースの [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/ja_JP/installing-boot9strap-(soundhax).txt b/_pages/ja_JP/installing-boot9strap-(soundhax).txt
index 86d0a7e99f..9f20b06c27 100644
--- a/_pages/ja_JP/installing-boot9strap-(soundhax).txt
+++ b/_pages/ja_JP/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (universal-otherappと組み合わせた場合) は、すべてのリ
* 最新バージョンの [Soundhax](http://soundhax.com/) *(本体に合ったリージョンとバージョンを選択してください)*
+ 再生できないビデオとしてブラウザにSoundhaxが表示される場合は、Ctrl+SまたはCmd+Sを押してコンピュータに保存します
* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/)
* 最新のリリースの [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (universal-otherappと組み合わせた場合) は、すべてのリ
1. `/SDCARD`に行って、「<3 nedwill 2016」を再生します
+ 何度も試行しなければならないことがあります
+ 画面がフリーズした場合、電源ボタン長押しで強制的に電源を切り、もう一度やり直してください
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ja_JP/installing-boot9strap-(usm).txt b/_pages/ja_JP/installing-boot9strap-(usm).txt
index 9b94428187..b97039b6fe 100644
--- a/_pages/ja_JP/installing-boot9strap-(usm).txt
+++ b/_pages/ja_JP/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### 必要なもの
* [Seedminer](seedminer) でダウンロードした `movable.sed` ファイル
+* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/)
+
#### セクション I - 準備
1. 本体の電源が入っている場合、本体の電源を切ります
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. パソコンにSDカードを入れます
1. `boot.firm` と `boot.3dsx` をLuma3DSの `.zip` からSDカードのルートにコピーします
+ SDカードのルートとは、Nintendo 3DSのフォルダなどがある最初の項目のことであり、フォルダの中ではありません。
+1. `boot9strap`という名前のフォルダをSDカードのルート上に作成します。
+1. `boot9strap.firm`と`boot9strap.firm.sha`を boot9strap `.zip` ファイルから解凍し、SD カードのboot9strapフォルダにコピーします。
+1. SafeB9SInstaller `.zip` から`SafeB9SInstaller.bin`をSDカードのルートへコピーします
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. 「インターネット設定を設定しますか?」と聞かれたら、「はい」を選択します。
1. 次の画面で、`接続先1`→`設定変更`→`右のページ(右矢印)`→`Proxyの設定`→`詳細設定` の順に進みます
+ [この画像](https://uwuu.ca/images/safemode_highlighted.png)を参考にして下さい
-1. トップ画面に `B9S install SUCCESS` が表示されたら、いずれかのボタンを押して再起動し、Lumaが立ち上がります。
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### セクション IV - Luma3DSを設定する
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### セクション V - Luma3DSの設定
1. デバイスはLuma3DS設定メニューに再起動します
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### セクション V - WiFi設定プロファイルの復元
+#### Section VI - Restoring WiFi Configuration Profiles
1. 「本体設定」を開きます。
1. `データ管理` -> `DSiWare データ管理` の順に移ります。
diff --git a/_pages/ja_JP/seedminer.txt b/_pages/ja_JP/seedminer.txt
index f98304e4b9..e61b42f5d9 100644
--- a/_pages/ja_JP/seedminer.txt
+++ b/_pages/ja_JP/seedminer.txt
@@ -20,7 +20,7 @@ For information on how Seedminer works, see [this presentation](https://zoogie.g
1. SDカードにある、`Nintendo 3DS` フォルダを開きます。
1. 表示されている32文字のフォルダ名をコピーします。
+ まだそれ以上フォルダを展開しないでください
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ja_JP/updating-b9s.txt b/_pages/ja_JP/updating-b9s.txt
index 32fe8c5491..ee4619eabd 100644
--- a/_pages/ja_JP/updating-b9s.txt
+++ b/_pages/ja_JP/updating-b9s.txt
@@ -14,7 +14,7 @@ This page is for existing boot9strap users to update their installation of boot9
### 必要なもの
* 最新バージョンの[SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版の [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; `devkit`ファイルではなく、 `ntr`ファイルではありません) *
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新バージョンの[Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest/)
### 手順
diff --git a/_pages/ko_KR/a9lh-to-b9s.txt b/_pages/ko_KR/a9lh-to-b9s.txt
index 9936c74386..227c67b219 100644
--- a/_pages/ko_KR/a9lh-to-b9s.txt
+++ b/_pages/ko_KR/a9lh-to-b9s.txt
@@ -30,7 +30,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* v7.0.5 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(`.7z` 파일)*
* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### 진행 방법
#### 섹션 I - 준비 작업
diff --git a/_pages/ko_KR/finalizing-setup.txt b/_pages/ko_KR/finalizing-setup.txt
index 3b33073a67..cad32a39a6 100644
--- a/_pages/ko_KR/finalizing-setup.txt
+++ b/_pages/ko_KR/finalizing-setup.txt
@@ -167,7 +167,7 @@ ___
- (Select)를 누른 채 기기를 부팅시키면 Luma3DS 설정 메뉴가 실행됩니다.
- (Start)를 누른 채 기기를 부팅시키면 GodMode9이나, `/luma/payloads/`에 페이로드를 여러 개 넣고 있다면, Luma3DS 체인로더가 실행됩니다.
- 기본으로는, 3DS 모드에 있을 때 (L) + (십자 아래) + (Select)를 누르면 Rosalina 메뉴가 열리며, 시스템 정보를 보거나, 스크린샷을 찍거나, 치트를 활성화시키는 등의 작업을 할 수 있습니다. 이 콤보는 Rosalina 메뉴에서 변경될 수 있습니다.
-- (Start) + (Select) + (X)를 누른 채 기기를 부팅시키면, SD 카드의 `boot9strap` 폴더에 `boot9.bin`, `boot11.bin`, `otp.bin` 를 추출합니다. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ko_KR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ko_KR/flashing-ntrboot-(3ds-multi-system).txt
index e93fc83a05..27cb4052c0 100644
--- a/_pages/ko_KR/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/ko_KR/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ title: "ntrboot 플래싱 (3DS 두 대)"
* 두 개의 3DS 기기
+ **소스 3DS**: 이미 boot9strap을 구동하고 있는 3DS
+ **타겟 3DS** CFW를 설치할 3DS
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 최신 버전의 [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### 진행 방법
diff --git a/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt b/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt
index 5b9a382b7f..97b7228e3a 100644
--- a/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/ko_KR/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ title: "ntrboot 플래싱 (단일 3DS)"
### 준비물
* ntrboot를 설치할 수 있는 플래시카트
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 최신 버전의 [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 진행 방법
diff --git a/_pages/ko_KR/flashing-ntrboot-(nds).txt b/_pages/ko_KR/flashing-ntrboot-(nds).txt
index e902cb5798..26b838f340 100644
--- a/_pages/ko_KR/flashing-ntrboot-(nds).txt
+++ b/_pages/ko_KR/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ title: "ntrboot 플래싱 (NDS)"
* 두 기기
+ **소스 NDS/NDSL**: 플래시카트와 호환되는 닌텐도 DS 또는 DS Lite
+ **타겟 3DS** CFW를 설치할 3DS
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 최신 버전의 [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 진행 방법
diff --git a/_pages/ko_KR/homebrew-launcher-(soundhax).txt b/_pages/ko_KR/homebrew-launcher-(soundhax).txt
index 57e33cafdd..27124dedef 100644
--- a/_pages/ko_KR/homebrew-launcher-(soundhax).txt
+++ b/_pages/ko_KR/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ udsploit(다음 페이지에 사용) 이 작동하기 위해서 무선통신이
* 최신 버전의 [Soundhax](http://soundhax.com) *(기기의 지역과 버전에 맞게 선택)*
+ 만약 Soundhax가 브라우저에서 실행 불가능한 비디오로 나오면, Ctrl+S 또는 Cmd+S를 눌러 컴퓨터로 저장해 주세요.
* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 최신 버전의 [safehax](https://github.com/TiniVi/safehax/releases/latest) *(`.3dsx` 파일)*
* 최신 버전의 [udsploit](https://github.com/smealum/udsploit/releases/latest)
*최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ko_KR/installing-boot9strap-(hardmod).txt b/_pages/ko_KR/installing-boot9strap-(hardmod).txt
index 2574e549d6..f9506aedc5 100644
--- a/_pages/ko_KR/installing-boot9strap-(hardmod).txt
+++ b/_pages/ko_KR/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
### 준비물
* [하드모드](https://gbatemp.net/threads/414498/)를 이용하여 추출한 보유 기기의 NAND 이미지
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 최신 버전의 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Mac과 Linux 사용자는 '.py'를 구동하기 위해 [Python 3](https://www.python.org/downloads/)이 설치되어 있어야 하는 반면에 Windows 사용자들은 컴파일된 '.exe'파일을 사용할 수 있습니다
*최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt
index 1245396ef7..5728ab2ddf 100644
--- a/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ko_KR/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ kartdlphax는 마리오 카트 7의 다운로드 플레이 모드를 사용하
**타겟 3DS** (커스텀 펌웨어를 설치하려고 하는 3DS)에서:
* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 최신 버전의 [일반 Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
index 16c56da08e..01c7888d94 100644
--- a/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ko_KR/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
당신의 기기의 슬립모드를 작동시킬 자석 (접는 형식의 기기를 사용할 경우만)
* ntrboot 플래시된 플래시카트
* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
*최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### 진행 방법
diff --git a/_pages/ko_KR/installing-boot9strap-(pichaxx).txt b/_pages/ko_KR/installing-boot9strap-(pichaxx).txt
index c6ce6d0e78..68530a6966 100644
--- a/_pages/ko_KR/installing-boot9strap-(pichaxx).txt
+++ b/_pages/ko_KR/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ title: "boot9strap 설치 (PicHaxx)"
+ 포켓몬 피크로스를 설치하려면 SD 카드가 들어가 있어야 합니다
* [Seedminer](seedminer)에서 받은 `movable.sed` 파일
* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* 최신 버전의 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/ko_KR/installing-boot9strap-(soundhax).txt b/_pages/ko_KR/installing-boot9strap-(soundhax).txt
index cddbc92c97..7a4d027884 100644
--- a/_pages/ko_KR/installing-boot9strap-(soundhax).txt
+++ b/_pages/ko_KR/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax는 (universal-otherapp과 사용할 때) 모든 지역의 1.0.0 이상
* 최신 버전의 [Soundhax](http://soundhax.com) *(기기의 지역과 버전에 맞게 선택)*
+ 만약 Soundhax가 브라우저에서 실행 불가능한 비디오로 나오면, Ctrl+S 또는 Cmd+S를 눌러 컴퓨터로 저장해 주세요.
* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* 최신 버전의 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax는 (universal-otherapp과 사용할 때) 모든 지역의 1.0.0 이상
1. `/SDCARD`로 가서 "<3 nedwill 2016"를 재생해 주세요
+ 여러 번의 시도가 필요할 수 있습니다
+ 재생 중 화면이 멈출 경우 전원 버튼을 길게 눌러서 기기를 강제로 종료시킨 후 다시 시도해 주세요
- + 만약 콘솔이 붉은 색과 하얀 색의 화면을 표시 **하고** 콘솔이 시스템 버전 9.4.0, 9.5.0, 또는 9.6.0이면, [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))를 진행하세요
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ko_KR/installing-boot9strap-(usm).txt b/_pages/ko_KR/installing-boot9strap-(usm).txt
index a13df5f8cd..fa746ff506 100644
--- a/_pages/ko_KR/installing-boot9strap-(usm).txt
+++ b/_pages/ko_KR/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ SAFE_MODE 펌웨어를 해킹하기 위해, 익스플로잇이 되어있는 Wi-F
### 준비물
* [Seedminer](seedminer)에서 받은 `movable.sed` 파일
+* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
*최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### 섹션 I - 준비 작업
1. 기기의 전원이 켜져 있다면, 전원을 꺼 주세요
@@ -34,6 +37,9 @@ SAFE_MODE 펌웨어를 해킹하기 위해, 익스플로잇이 되어있는 Wi-F
1. SD 카드를 컴퓨터에 삽입해 주세요
1. Luma3DS `.zip`안에 있는 `boot.firm`과 `boot.3dsx`를 SD 카드의 루트에 복사해 주세요
+ SD 카드의 루트는 SD 카드를 열 때 보이는 디렉토리이고, Nintendo 3DS 폴더가 보이지만 그 안에 않 들어가 있는 상태의 폴더 입니다
+1. SD 카드이 루트에 `boot9strap` 라는 이름으로 새 폴더를 생성해 주세요
+1. SD 카드에 있는 `/boot9strap/` 폴더에 boot9strap `.zip` 파일 안에 압축되있는 `boot9strap.firm`과 `boot9strap.firm.sha`을 복사해 주세요
+1. SafeB9SInstaller `.zip`의 `SafeB9SInstaller.bin`을 SD 카드의 루트로 복사해 주세요
1. `unSAFE_MODE.zip` 안에 있는 `usm.bin`을 SD 카드의 루트에 복사해 주세요
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ SAFE_MODE 펌웨어를 해킹하기 위해, 익스플로잇이 되어있는 Wi-F
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. 이 화면에서, `접솔 경로 1` -> `설정 변경` -> `다음 페이지 (오른쪽 화살표)` -> `Proxy 설정` -> `세부 설정` 으로 이동해 주세요
+ [이 (영어) 사진](https://uwuu.ca/images/safemode_highlighted.png)처럼 하시면 됩니다
-1. `B9S install SUCCESS` 화면이 표시 될 시, 아무 버튼을 눌러 Luma 설정으로 재부팅해 주세요
+1. 익스플로잇이 성공적이었다면 SafeB9SInstaller로 부팅되었을 것입니다
-#### 섹션 IV - Luma3DS 설정
+#### Section IV - Installing boot9strap
+
+1. 메시지가 나타나면, boot9strap을 설치하기 위하여 화면에 주어진 키 조합을 입력해 주세요
+ + If the top screen is blank, power off your device and re-do Section III
+1. 작업이 완료되면, (A) 를 눌려 기기를 재부팅해 주세요
+
+#### 섹션 V - Luma3DS 설정
1. 기기는 Luma3DS 구성 메뉴로 부팅되었을 겁니다
+ Luma3DS 구성 메뉴는 전원이 꺼져 있는 상태에서, SELECT를 길게 누르며 전원을 켜주시면 열 수 있습니다
@@ -86,7 +98,7 @@ SAFE_MODE 펌웨어를 해킹하기 위해, 익스플로잇이 되어있는 Wi-F
+ Luma3DS는 보통 HOME 메뉴와 똑같이 보입니다. 만약 기기가 HOME 메뉴로 부팅되었다면, 커스텀 펌웨어가 설치되어 있습니다.
+ 다음 페이지에서는 SD 카드 없이 부팅 할 수 있도록 Luma3DS를 내장 메모리로 설치할 것 입니다.
-#### 섹션 V - Wi-Fi 프로필 복구
+#### Section VI - Restoring WiFi Configuration Profiles
1. 기기에서 본체 설정을 열어 주세요
1. `데이터 관리` -> `DSiWare` 메뉴를 열어 주세요
diff --git a/_pages/ko_KR/seedminer.txt b/_pages/ko_KR/seedminer.txt
index 9b29586b8e..68c0bef9ef 100644
--- a/_pages/ko_KR/seedminer.txt
+++ b/_pages/ko_KR/seedminer.txt
@@ -20,7 +20,7 @@ Seedminer이 정확히 어떻게 작동하는지 더 배우고싶다면 [이 프
1. SD 카드의 `Nintendo 3DS` 폴더를 열어 주세요
1. `Nintendo 3DS` 폴더 내 32글자의 폴더 이름을 복사해 주세요
+ 다른 폴더 안에 들어가지 마세요
- + 만약 이런 폴더가 여러 개 보인다면 [이 설명서](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder) 를 따르세요.
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ko_KR/updating-b9s.txt b/_pages/ko_KR/updating-b9s.txt
index 9513fdd396..a941634118 100644
--- a/_pages/ko_KR/updating-b9s.txt
+++ b/_pages/ko_KR/updating-b9s.txt
@@ -14,7 +14,7 @@ title: "B9S 업데이트"
### 준비물
* 최신 버전의 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 최신 버전의 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(기본 boot9strap; `devkit`, `ntr` 파일이 아닙니다.)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 최신 버전의 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### 진행 방법
diff --git a/_pages/ms_MY/a9lh-to-b9s.txt b/_pages/ms_MY/a9lh-to-b9s.txt
index 94f07a3063..a8b7a12716 100644
--- a/_pages/ms_MY/a9lh-to-b9s.txt
+++ b/_pages/ms_MY/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/ms_MY/finalizing-setup.txt b/_pages/ms_MY/finalizing-setup.txt
index e7822ef787..74bc67095f 100644
--- a/_pages/ms_MY/finalizing-setup.txt
+++ b/_pages/ms_MY/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ms_MY/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ms_MY/flashing-ntrboot-(3ds-multi-system).txt
index 344ce7a827..cde8cf89a6 100644
--- a/_pages/ms_MY/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/ms_MY/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt b/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt
index 6ef0d56dc9..079508be28 100644
--- a/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/ms_MY/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/ms_MY/flashing-ntrboot-(nds).txt b/_pages/ms_MY/flashing-ntrboot-(nds).txt
index 0627d9c2b8..3d908effd3 100644
--- a/_pages/ms_MY/flashing-ntrboot-(nds).txt
+++ b/_pages/ms_MY/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/ms_MY/homebrew-launcher-(soundhax).txt b/_pages/ms_MY/homebrew-launcher-(soundhax).txt
index 102c169aa1..e3e54f1095 100644
--- a/_pages/ms_MY/homebrew-launcher-(soundhax).txt
+++ b/_pages/ms_MY/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ms_MY/installing-boot9strap-(hardmod).txt b/_pages/ms_MY/installing-boot9strap-(hardmod).txt
index 452701549f..20841b433a 100644
--- a/_pages/ms_MY/installing-boot9strap-(hardmod).txt
+++ b/_pages/ms_MY/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt b/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ms_MY/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt
index db51cbd9b3..afcdf8d019 100644
--- a/_pages/ms_MY/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ms_MY/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/ms_MY/installing-boot9strap-(pichaxx).txt b/_pages/ms_MY/installing-boot9strap-(pichaxx).txt
index d1cc6ffa42..439e1166a0 100644
--- a/_pages/ms_MY/installing-boot9strap-(pichaxx).txt
+++ b/_pages/ms_MY/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/ms_MY/installing-boot9strap-(soundhax).txt b/_pages/ms_MY/installing-boot9strap-(soundhax).txt
index 0f2eb34bd4..1b77e2dc48 100644
--- a/_pages/ms_MY/installing-boot9strap-(soundhax).txt
+++ b/_pages/ms_MY/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Pergi ke `/SDCARD`, kemudian mainkan "<3 nedwill 2016"
+ Mungkin memerlukan beberapa kali cubaan
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ms_MY/installing-boot9strap-(usm).txt b/_pages/ms_MY/installing-boot9strap-(usm).txt
index e5495bd778..62c7345d84 100644
--- a/_pages/ms_MY/installing-boot9strap-(usm).txt
+++ b/_pages/ms_MY/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Pasang kad SD anda ke dalam komputer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/ms_MY/seedminer.txt b/_pages/ms_MY/seedminer.txt
index 2fd5329a58..cc9279c67d 100644
--- a/_pages/ms_MY/seedminer.txt
+++ b/_pages/ms_MY/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ms_MY/updating-b9s.txt b/_pages/ms_MY/updating-b9s.txt
index 8576f5a1f0..e016307113 100644
--- a/_pages/ms_MY/updating-b9s.txt
+++ b/_pages/ms_MY/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/nl_NL/a9lh-to-b9s.txt b/_pages/nl_NL/a9lh-to-b9s.txt
index a65d718490..e1281536d6 100644
--- a/_pages/nl_NL/a9lh-to-b9s.txt
+++ b/_pages/nl_NL/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Merk wel op dat enkel bij de New 3DS `secret_sector.bin` nodig is om de arm9load
* De nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* Versie 7.0.5 van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(het `.7z` bestand)*
* De nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructies
#### Deel I - Voorbereiding
diff --git a/_pages/nl_NL/finalizing-setup.txt b/_pages/nl_NL/finalizing-setup.txt
index 2f2d476a4a..bd4f355527 100644
--- a/_pages/nl_NL/finalizing-setup.txt
+++ b/_pages/nl_NL/finalizing-setup.txt
@@ -167,7 +167,7 @@ Hier zijn enkele belangrijke combos die je zou moeten kennen:
- Terwijl je (Select) ingedrukt houdt bij het opstarten van je console kom je in het Luma3DS configuratie menu.
- (Start) ingedrukt houden bij het opstarten van je 3DS zal GodMode9 openen, of als je meerdere payloads hebt in `/luma/payloads/`, zal Luma3DS chainloader geopend worden.
- Druk standaard op (Left Shoulder) + (Down D-Pad) + (Select) terwijl je in 3DS modus zit zal het Rosalina menu openen. waar je systeem informatie kunt controleren, screenshots kunt maken, cheats kunt inschakelen en meer. Dit kan worden gewijzigd in het Rosalina menu.
-- Terwijl je (Start) + (Select) + (X) ingedrukt houden terwijl je 3DS opstart zal `boot9.bin`, `boot11.bin` en `otp.bin` naar de `boot9strap` map op je SD-kaart. De `boot9strap` map zal worden aangemaakt als deze nog niet bestaat.
+- Terwijl je (Start) + (Select) + (X) ingedrukt houdt tijdens het opstarten zal een LED-notificatie een kleur tonen voor debugging. Zie de [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) voor een lijst.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/nl_NL/flashing-ntrboot-(3ds-multi-system).txt b/_pages/nl_NL/flashing-ntrboot-(3ds-multi-system).txt
index 8884e00651..4f3186aae8 100644
--- a/_pages/nl_NL/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/nl_NL/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Merk op dat je valse flashkaarten in zeldzame gevallen kan **bricken** tijdens h
* Twee 3DS apparaten
+ **De source 3DS**: Een 3DS familie apparaat dat al boot9stap heeft
+ **De doel 3DS**: Een toestel op stock firmware
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* De nieuwste versie van [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructies
diff --git a/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt b/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt
index 704212fb04..52ddf33b99 100644
--- a/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/nl_NL/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Houd er rekening mee dat in sommige hele zeldzame omstandigheden het mogelijk ka
### Wat je nodig hebt
* Jouw ntrboot compitabel flashkaart
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* De nieuwste versie van [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructies
diff --git a/_pages/nl_NL/flashing-ntrboot-(nds).txt b/_pages/nl_NL/flashing-ntrboot-(nds).txt
index 62df740666..7af9ef8fac 100644
--- a/_pages/nl_NL/flashing-ntrboot-(nds).txt
+++ b/_pages/nl_NL/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Merk op dat je namaak flashkaarten in zeldzame gevallen kan **bricken** tijdens
* Twee toestellen
+ **De source NDS / NDSL**: De Nintendo DS of Nintendo DS Lite compatibel met jouw flashkaart
+ **De doel 3DS**: Een 3DS familie toestel op stock firmware
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* De nieuwste versie van [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructies
diff --git a/_pages/nl_NL/homebrew-launcher-(soundhax).txt b/_pages/nl_NL/homebrew-launcher-(soundhax).txt
index 3a89e13abf..960152d8f9 100644
--- a/_pages/nl_NL/homebrew-launcher-(soundhax).txt
+++ b/_pages/nl_NL/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Zorg ervoor dat Wireless Communicationaan staat, aangezien udsploit (gebruikt in
* De nieuwste versie van [Soundhax](https://soundhax.com/) *(Voor jouw regio, apparaat en versie)*
+ Als Soundhax als een niet afspeelbare video in je browser wordt weergegeven, druk dan op Ctrl+S of Cmd+S om het op te slaan op je computer
* De nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* De nieuwste versie van [safehax](https://github.com/TiniVi/safehax/releases/latest) *(het `.3dsx` bestand)*
* De nieuwste versie van [udsploit](https://github.com/smealum/udsploit/releases/latest)
* De nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/nl_NL/installing-boot9strap-(hardmod).txt b/_pages/nl_NL/installing-boot9strap-(hardmod).txt
index c989dbb7f0..fc5aca57d0 100644
--- a/_pages/nl_NL/installing-boot9strap-(hardmod).txt
+++ b/_pages/nl_NL/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ Dit werkt op de New 3DS, New 2DS, Old 3DS en Old 2DS op *elke* versie waar je de
### Wat je nodig hebt
* Jouw NAND bestand die je hebt gekregen met de [hardmod](https://gbatemp.net/threads/414498/)
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* De nieuwste versie van [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows gebruikers kunnen de `.exe` kunnen gebruiken, terwijl Mac en Linux gebruiks [Python 3](https://www.python.org/downloads/) nodig zullen hebben om de `.py` te gebruiken
* De nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt b/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt
index ae26315c68..7b43f6016a 100644
--- a/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/nl_NL/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ Op de **source 3DS** (de 3DS met custom firmware):
Op de **target 3DS** (de 3DS die je probeert te wijzigen):
* De nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* De nieuwste versie van [standaard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Deel I - Voorbereiding (bron 3DS)
diff --git a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt
index 8775b756ca..0e2ae1539e 100644
--- a/_pages/nl_NL/installing-boot9strap-(ntrboot).txt
+++ b/_pages/nl_NL/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ Om de [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links op deze pagin
* Een magneet die de slaapstand van uw apparaat activeert (als het apparaat met behulp van een opvouwbare stijl)
* Je ntrboot geflashde flashkaart
* De nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* De nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructies
diff --git a/_pages/nl_NL/installing-boot9strap-(pichaxx).txt b/_pages/nl_NL/installing-boot9strap-(pichaxx).txt
index d46b48f836..1124a08f09 100644
--- a/_pages/nl_NL/installing-boot9strap-(pichaxx).txt
+++ b/_pages/nl_NL/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ Dit proces zal je Pokémon Picross save bestand overschrijven, als je er een heb
+ Je SD-kaart moet in je apparaat geplaatst worden om Pokémon Picross te installeren
* Je `movable.sed` bestand van het voltooien van [Seedminer](seedminer)
* De nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* De nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* De nieuwste versie van [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/nl_NL/installing-boot9strap-(soundhax).txt b/_pages/nl_NL/installing-boot9strap-(soundhax).txt
index 05bd4f4120..e5864474cc 100644
--- a/_pages/nl_NL/installing-boot9strap-(soundhax).txt
+++ b/_pages/nl_NL/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (wanneer gecombineerd met universal-otherapp) is compatibel met versies
* De nieuwste versie van [Soundhax](http://soundhax.com) *(voor jouw regio, apparaat en versie)*
+ Als Soundhax als een niet afspeelbare video in je browser wordt weergegeven, druk dan op Ctrl+S of Cmd+S om het op te slaan op je computer
* De nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* De nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* De nieuwste versie van [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (wanneer gecombineerd met universal-otherapp) is compatibel met versies
1. Ga naar `/SDCARD`, en speel dan "<3 nedwill 2016" af
+ Dit kan meerdere pogingen nodig hebben
+ Als het bevriest, forceer de console om uit te schakelen door de power knop ingedrukt te houden, probeer het dan opnieuw
- + Als je console een rood en wit scherm laat zien *en* je console draait op systeemversie 9.4.0, 9.5.0, of 9.6.0, probeer dan [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax)) te volgen
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/nl_NL/installing-boot9strap-(usm).txt b/_pages/nl_NL/installing-boot9strap-(usm).txt
index 701af67fb7..3ae9018c5b 100644
--- a/_pages/nl_NL/installing-boot9strap-(usm).txt
+++ b/_pages/nl_NL/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ Als je (Rechts/Linkse Shoulder), (D-Pad Up) of (A) knoppen niet werken, moet je
### Wat je nodig hebt
* je `movable.sed` bestand van het voltooien van [Seedminer](seedminer)
+* De nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* De nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Deel I - Voorbereiding
1. Als je 3DS aanstaat, zet hem dan af
@@ -34,6 +37,9 @@ Als je (Rechts/Linkse Shoulder), (D-Pad Up) of (A) knoppen niet werken, moet je
1. Plaats je SD kaart in je computer
1. Kopieer `boot.firm` en `boot.3dsx` van de Luma3DS `.zip` naar de hoofdmap van je SD-kaart
+ De hoofdmap van de SD-kaart verwijst naar de bovenste map van de SD-kaart, waarin je alle mappen op de SD-kaart kunt zien, waaronder de Nintendo 3DS map, zonder je in de Nintendo 3DS map te bevinden
+1. Maak een map genaamd `boot9strap` op de hoofdmap van je SD-kaart
+1. Kopieer `boot9strap.firm` en `boot9strap.firm.sha` van de boot9strap `.zip` naar de `/boot9strap/` map op je SD-kaart
+1. Kopieer `SafeB9SInstaller.bin` van de SafeB9SInstaller `.zip` naar de hoofdmap van je SD-kaart
1. Kopieer `usm.bin` van de `unSAFE_MODE.zip` naar de hoofdmap van je SD-kaart
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ Als je (Rechts/Linkse Shoulder), (D-Pad Up) of (A) knoppen niet werken, moet je
1. Wanneer gevraagd wordt "Would you like to configure Internet settings?" selecteer dan "Yes"
1. In het volgende menu, navigeer naar `Connection 1` -> `Change Settings` -> `Next Page (rechter pijl)` -> `Proxy Settings` -> `Detailed Setup`
+ Dit is een [visuele weergave](https://uwuu.ca/images/safemode_highlighted.png)
-1. Zodra je `B9S install SUCCESS op het bovenste scherm ziet, druk je op eender welke knop om opnieuw op te starten naar Luma Configuration
+1. Als de exploit succesvol was, zal je SafeB9SInstaller hebben opgestart
-#### Deel IV - Luma3DS configureren
+#### Deel IV - Boot9strap installeren
+
+1. Wanneer daarom wordt gevraagd, voer de toetsencombinatie op het bovenste scherm in om boot9strap te installeren
+ + Als het bovenste scherm leeg is, schakel je apparaat uit en herdoe Deel III
+1. Zodra het voltooid is, druk op (A) om je apparaat opnieuw op te starten
+
+#### Deel V - Luma3DS configureren
1. Je apparaat zou opnieuw moeten opgestart zijn naar het configuratiemenu van Luma3DS
+ Je kunt altijd het Luma3DS configuratiemenu openen door je 3DS uit te schakelen, SELECT ingedrukt houden en het toestel aan te zetten terwijl je SELECT ingedrukt houdt
@@ -86,7 +98,7 @@ Op dit moment zal je console standaard opstarten naar Luma3DS zolang de SD-kaart
+ Luma3DS ziet er niet anders uit dan het normale HOME Menu. Als je console in het HOME Menu is opgestart, gebruikt hij custom firmware.
+ Op de volgende pagina kopieer je Luma3DS naar het interne geheugen, zodat je het kan opstarten zonder SD-kaart.
-#### Deel V - Wifi-configuratie profielen herstellen
+#### Deel VI - Wifi-configuratie profielen herstellen
1. Open System Settings op je apparaat
1. Ga naar `Data Management` -> `DSiWare`
diff --git a/_pages/nl_NL/seedminer.txt b/_pages/nl_NL/seedminer.txt
index f8741c5b1d..8f8284028a 100644
--- a/_pages/nl_NL/seedminer.txt
+++ b/_pages/nl_NL/seedminer.txt
@@ -20,7 +20,7 @@ Deze methode gebruikt een krachtige grafische kaart om de benodigde berekeningen
1. Ga naar de `Nintendo 3DS` map op je SD-kaart
1. Kopieer de 32-tekens lange naam van de map die je ziet in de Nintendo 3DS map
+ Ga niet binnen in andere mappen
- + Als je meerdere mappen ziet, volg dan [deze instructies](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-map)
+ + Als je meerdere mappen ziet met 32-tekens lange namen, volg dan [deze instructies](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-map)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/nl_NL/updating-b9s.txt b/_pages/nl_NL/updating-b9s.txt
index 1b7f1d6ad3..b63cda0431 100644
--- a/_pages/nl_NL/updating-b9s.txt
+++ b/_pages/nl_NL/updating-b9s.txt
@@ -14,7 +14,7 @@ Terwijl we wel geloven dat custom firmware veilig is voor online gebruik, zijn e
### Wat je nodig hebt
* De nieuwste versie van [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; niet het `devkit` bestand, niet het `ntr` bestand)*
+* De nieuwste versie van [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* De nieuwste versie van [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructies
diff --git a/_pages/no_NO/a9lh-to-b9s.txt b/_pages/no_NO/a9lh-to-b9s.txt
index 7708f68192..1b15cba03c 100644
--- a/_pages/no_NO/a9lh-to-b9s.txt
+++ b/_pages/no_NO/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/no_NO/finalizing-setup.txt b/_pages/no_NO/finalizing-setup.txt
index cd33c4f9d2..a850fd9416 100644
--- a/_pages/no_NO/finalizing-setup.txt
+++ b/_pages/no_NO/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/no_NO/flashing-ntrboot-(3ds-multi-system).txt b/_pages/no_NO/flashing-ntrboot-(3ds-multi-system).txt
index 21cc5d0777..989aa5657c 100644
--- a/_pages/no_NO/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/no_NO/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt b/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt
index 5d27dd6764..8544706c17 100644
--- a/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/no_NO/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/no_NO/flashing-ntrboot-(nds).txt b/_pages/no_NO/flashing-ntrboot-(nds).txt
index f4863cff97..f01c6afb92 100644
--- a/_pages/no_NO/flashing-ntrboot-(nds).txt
+++ b/_pages/no_NO/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/no_NO/homebrew-launcher-(soundhax).txt b/_pages/no_NO/homebrew-launcher-(soundhax).txt
index dc6526e81d..28b7dffab2 100644
--- a/_pages/no_NO/homebrew-launcher-(soundhax).txt
+++ b/_pages/no_NO/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/no_NO/installing-boot9strap-(hardmod).txt b/_pages/no_NO/installing-boot9strap-(hardmod).txt
index 266541a3ce..3410fcc471 100644
--- a/_pages/no_NO/installing-boot9strap-(hardmod).txt
+++ b/_pages/no_NO/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/no_NO/installing-boot9strap-(kartdlphax).txt b/_pages/no_NO/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/no_NO/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/no_NO/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/no_NO/installing-boot9strap-(ntrboot).txt b/_pages/no_NO/installing-boot9strap-(ntrboot).txt
index d75a5b8e75..880224288f 100644
--- a/_pages/no_NO/installing-boot9strap-(ntrboot).txt
+++ b/_pages/no_NO/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/no_NO/installing-boot9strap-(pichaxx).txt b/_pages/no_NO/installing-boot9strap-(pichaxx).txt
index 3ef09837c2..54d0328d0d 100644
--- a/_pages/no_NO/installing-boot9strap-(pichaxx).txt
+++ b/_pages/no_NO/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/no_NO/installing-boot9strap-(soundhax).txt b/_pages/no_NO/installing-boot9strap-(soundhax).txt
index 8f57174ae8..581ebd7b58 100644
--- a/_pages/no_NO/installing-boot9strap-(soundhax).txt
+++ b/_pages/no_NO/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Gå til `/SDCARD`, og spill deretter av "<3 nedwill 2016"
+ Dette kan ta flere forsøk
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/no_NO/installing-boot9strap-(usm).txt b/_pages/no_NO/installing-boot9strap-(usm).txt
index 0f1c41805a..ef4cc131df 100644
--- a/_pages/no_NO/installing-boot9strap-(usm).txt
+++ b/_pages/no_NO/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Sett inn SD-kortet i datamaskinen din
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/no_NO/seedminer.txt b/_pages/no_NO/seedminer.txt
index e2b8183995..8ce5c55a02 100644
--- a/_pages/no_NO/seedminer.txt
+++ b/_pages/no_NO/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/no_NO/updating-b9s.txt b/_pages/no_NO/updating-b9s.txt
index 4e015c0ac2..f0ca4aaffb 100644
--- a/_pages/no_NO/updating-b9s.txt
+++ b/_pages/no_NO/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/pl_PL/a9lh-to-b9s.txt b/_pages/pl_PL/a9lh-to-b9s.txt
index ab6377baff..885f36295c 100644
--- a/_pages/pl_PL/a9lh-to-b9s.txt
+++ b/_pages/pl_PL/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Na New 3DSie plik `secret_sector.bin` jest potrzebny aby cofnąć exploit arm9lo
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instrukcje
#### Sekcja I - Przygotowanie
diff --git a/_pages/pl_PL/finalizing-setup.txt b/_pages/pl_PL/finalizing-setup.txt
index b6ceb5acd0..f9ec4539d9 100644
--- a/_pages/pl_PL/finalizing-setup.txt
+++ b/_pages/pl_PL/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/pl_PL/flashing-ntrboot-(3ds-multi-system).txt b/_pages/pl_PL/flashing-ntrboot-(3ds-multi-system).txt
index 8a51f57950..3bf1b82ec1 100644
--- a/_pages/pl_PL/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/pl_PL/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Zauważ, że w niektórych rzadkich przypadkach proces wgrywania ntrboot na podr
* Dwóch urządzeń z rodziny 3DS
+ **Źródłowego 3DS'a**: urządzenie z rodziny 3DS na którym jest już zainstalowany boot9strap
+ **Docelowego 3DS'a**: urządzenie na oryginalnym oprogramowaniu sprzętowym
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* Najnowszej wersji [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instrukcje
diff --git a/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt b/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt
index 19227c7b1e..a412771882 100644
--- a/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/pl_PL/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Zauważ, że w niektórych rzadkich przypadkach proces wgrywania ntrboot na podr
### Czego Potrzebujesz
* Twojego kompatybilnego z ntrboot flashcarta DS / DSi
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instrukcje
diff --git a/_pages/pl_PL/flashing-ntrboot-(nds).txt b/_pages/pl_PL/flashing-ntrboot-(nds).txt
index 7df967b6f5..ff4d6abf0a 100644
--- a/_pages/pl_PL/flashing-ntrboot-(nds).txt
+++ b/_pages/pl_PL/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Zauważ, że w niektórych rzadkich przypadkach proces wgrywania ntrboot na podr
* Dwóch urządzeń
+ **Źródłowego NDS / NDSL**: konsola Nintendo DS lub DS Lite kompatybilna z twoim flashcartem
+ **Docelowego 3DS'a**: urządzenia na oryginalnym oprogramowaniu sprzętowym
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instrukcje
diff --git a/_pages/pl_PL/homebrew-launcher-(soundhax).txt b/_pages/pl_PL/homebrew-launcher-(soundhax).txt
index b7fead3f77..f641e48bcb 100644
--- a/_pages/pl_PL/homebrew-launcher-(soundhax).txt
+++ b/_pages/pl_PL/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Upewnij się że "Wireless Communication" (wifi) twojej konsoli jest włączone,
* Najnowszej wersji [Soundhax](http://soundhax.com/) *(dla twojego regionu, urządzenia i wersji systemu)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Najnowszej wersji [safehax](https://github.com/TiniVi/safehax/releases/latest) *(pliku `.3dsx`)*
* Najnowszej wersji [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/pl_PL/installing-boot9strap-(hardmod).txt b/_pages/pl_PL/installing-boot9strap-(hardmod).txt
index 61ddd042a6..8d67058eb6 100644
--- a/_pages/pl_PL/installing-boot9strap-(hardmod).txt
+++ b/_pages/pl_PL/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ To zadziała na New 3DS, New 2DS, Old 3DS, i Old 2DS na *każdej* wersji oprogra
### Czego Potrzebujesz
* Obrazu NAND wykonanego przy użyciu [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Najnowszej wersji programu [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Użytkownicy Windowsa mogą użyć skompilowanego pliku `.exe`, podczas gdy użytkownicy Mac'a i Linuxa muszą posiadać zainstalowany [Python 3](https://www.python.org/downloads/) aby uruchomić plik `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt b/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt
index 6ffa0d25d5..0c1d2ab2fa 100644
--- a/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/pl_PL/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt
index 3aefd31686..b4333ea8b7 100644
--- a/_pages/pl_PL/installing-boot9strap-(ntrboot).txt
+++ b/_pages/pl_PL/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Magnesu, który załącza sleep mode na twojej konsoli (jeśli używasz składany styl urządzenia)
* Twojego flashcarta z wgranym ntrboot
* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instrukcje
diff --git a/_pages/pl_PL/installing-boot9strap-(pichaxx).txt b/_pages/pl_PL/installing-boot9strap-(pichaxx).txt
index 16a9b6fa5f..a241ca3e0a 100644
--- a/_pages/pl_PL/installing-boot9strap-(pichaxx).txt
+++ b/_pages/pl_PL/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer)
* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/pl_PL/installing-boot9strap-(soundhax).txt b/_pages/pl_PL/installing-boot9strap-(soundhax).txt
index ab1a4c7e0e..23bc5ff437 100644
--- a/_pages/pl_PL/installing-boot9strap-(soundhax).txt
+++ b/_pages/pl_PL/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* Najnowszej wersji [Soundhax](http://soundhax.com/) *(dla twojego regionu, urządzenia i wersji systemu)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Przejdź do `/SDCARD`, następnie odtwórz "<3 nedwill 2016"
+ Może to wymagać wielu prób
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/pl_PL/installing-boot9strap-(usm).txt b/_pages/pl_PL/installing-boot9strap-(usm).txt
index b660143c5e..21b1843919 100644
--- a/_pages/pl_PL/installing-boot9strap-(usm).txt
+++ b/_pages/pl_PL/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### Czego Potrzebujesz
* Twojego pliku `movable.sed` z ukończenia [Seedminer](seedminer)
+* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Sekcja I - Przygotowanie
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Włóż kartę SD do komputera
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Stwórz folder o nazwie `boot9strap` w katalogu głównym karty SD
+1. Skopiuj `boot9strap.firm` i `boot9strap.firm.sha` z boot9strap `.zip` do folderu `/boot9strap/` na karcie SD
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Sekcja IV - Konfigurowanie Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Twoje urządzenie powinno uruchomić się ponownie i załadować menu konfiguracji Luma3DS
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Uruchom "System Settings" na twoim urządzeniu
1. Przejdź do `Data Management` -> `DSiWare`
diff --git a/_pages/pl_PL/seedminer.txt b/_pages/pl_PL/seedminer.txt
index 43f387d0e4..4514f1de64 100644
--- a/_pages/pl_PL/seedminer.txt
+++ b/_pages/pl_PL/seedminer.txt
@@ -20,7 +20,7 @@ Metoda ta wymaga użycia wydajnej karty graficznej, aby wykonać potrzebne oblic
1. Przejdź do folderu `Nintendo 3DS` na karcie SD
1. Skopiuj 32 znakową nazwę folderu który widzisz w folderze Nintendo 3DS
+ Nie wchodź w żadne inne foldery
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/pl_PL/updating-b9s.txt b/_pages/pl_PL/updating-b9s.txt
index a01ad142eb..027edd31d4 100644
--- a/_pages/pl_PL/updating-b9s.txt
+++ b/_pages/pl_PL/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### Czego Potrzebujesz
* Najnowszej wersji [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instrukcje
diff --git a/_pages/pt_BR/a9lh-to-b9s.txt b/_pages/pt_BR/a9lh-to-b9s.txt
index 12522531c0..b481159250 100644
--- a/_pages/pt_BR/a9lh-to-b9s.txt
+++ b/_pages/pt_BR/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt
index a9ceac4668..1feb86f453 100644
--- a/_pages/pt_BR/finalizing-setup.txt
+++ b/_pages/pt_BR/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt
index 768a6976ab..852be0b0ad 100644
--- a/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note que em algumas raras circunstâncias, pode ser possível que o processo de
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt
index 796bc3b7ab..a85ce94a29 100644
--- a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note que em algumas raras circunstâncias, pode ser possível que o processo de
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/pt_BR/flashing-ntrboot-(nds).txt b/_pages/pt_BR/flashing-ntrboot-(nds).txt
index 974ebd422c..f610bfb9a2 100644
--- a/_pages/pt_BR/flashing-ntrboot-(nds).txt
+++ b/_pages/pt_BR/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note que em algumas raras circunstâncias, pode ser possível que o processo de
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/pt_BR/homebrew-launcher-(soundhax).txt b/_pages/pt_BR/homebrew-launcher-(soundhax).txt
index 6babfffcee..8f1282de2d 100644
--- a/_pages/pt_BR/homebrew-launcher-(soundhax).txt
+++ b/_pages/pt_BR/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/pt_BR/installing-boot9strap-(hardmod).txt b/_pages/pt_BR/installing-boot9strap-(hardmod).txt
index 60d7d3cbee..aa041920ab 100644
--- a/_pages/pt_BR/installing-boot9strap-(hardmod).txt
+++ b/_pages/pt_BR/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ Isto funcionará no New 3DS, New 2DS, Old 3DS e Old 2DS em *todas* as versões e
### What You Need
* A imagem de sua NAND extraída usando seu [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Os usuários de Windows podem usar o compilado `.exe`, enquanto os usuários de Mac e Linux precisarão ter [Python 3](https://www.python.org/downloads/) instalado para executar o `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt
index e6083cee2a..d9c113a514 100644
--- a/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/pt_BR/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
index 83b6d3c5a3..cfa26bc37b 100644
--- a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Um ímã que aciona o modo de descanso do dispositivo (caso esteja usando um dispositivo dobrável)
* Seu flashcart com o ntrboot instalado
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/pt_BR/installing-boot9strap-(pichaxx).txt b/_pages/pt_BR/installing-boot9strap-(pichaxx).txt
index 863d9a6fd5..89e713cf69 100644
--- a/_pages/pt_BR/installing-boot9strap-(pichaxx).txt
+++ b/_pages/pt_BR/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/pt_BR/installing-boot9strap-(soundhax).txt b/_pages/pt_BR/installing-boot9strap-(soundhax).txt
index 08e0986ee3..57e75305cd 100644
--- a/_pages/pt_BR/installing-boot9strap-(soundhax).txt
+++ b/_pages/pt_BR/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Vá até `/SDCARD`, depois toque "<3 nedwill 2016"
+ Isso pode levar várias tentativas
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/pt_BR/installing-boot9strap-(usm).txt b/_pages/pt_BR/installing-boot9strap-(usm).txt
index 1bb51cfc95..0ee8476b42 100644
--- a/_pages/pt_BR/installing-boot9strap-(usm).txt
+++ b/_pages/pt_BR/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insira o cartão SD no seu computador
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Crie uma pasta chamada `boot9strap` na raiz do seu cartão SD
+1. Copie o `boot9strap.firm` e o `boot9strap.firm.sha` do `.zip` do boot9strap para a pasta `/boot9strap/` no seu cartão SD
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Seu dispositivo deve ter reiniciado no menu de configuração de Luma3DS
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/pt_BR/seedminer.txt b/_pages/pt_BR/seedminer.txt
index 925f88b12b..8a2b0e1651 100644
--- a/_pages/pt_BR/seedminer.txt
+++ b/_pages/pt_BR/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/pt_BR/updating-b9s.txt b/_pages/pt_BR/updating-b9s.txt
index 7cf3ec92ca..055c4fde45 100644
--- a/_pages/pt_BR/updating-b9s.txt
+++ b/_pages/pt_BR/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/pt_PT/a9lh-to-b9s.txt b/_pages/pt_PT/a9lh-to-b9s.txt
index 656d06ffd3..4803df20c8 100644
--- a/_pages/pt_PT/a9lh-to-b9s.txt
+++ b/_pages/pt_PT/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/pt_PT/finalizing-setup.txt b/_pages/pt_PT/finalizing-setup.txt
index aa5402a376..51b6ad52d4 100644
--- a/_pages/pt_PT/finalizing-setup.txt
+++ b/_pages/pt_PT/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/pt_PT/flashing-ntrboot-(3ds-multi-system).txt b/_pages/pt_PT/flashing-ntrboot-(3ds-multi-system).txt
index 78a4c294e0..ea8c8d9564 100644
--- a/_pages/pt_PT/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/pt_PT/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt b/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt
index 08db5daf10..d03063631c 100644
--- a/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/pt_PT/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/pt_PT/flashing-ntrboot-(nds).txt b/_pages/pt_PT/flashing-ntrboot-(nds).txt
index 587df99363..8e1e916e86 100644
--- a/_pages/pt_PT/flashing-ntrboot-(nds).txt
+++ b/_pages/pt_PT/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/pt_PT/homebrew-launcher-(soundhax).txt b/_pages/pt_PT/homebrew-launcher-(soundhax).txt
index 48db303d74..a05799ee76 100644
--- a/_pages/pt_PT/homebrew-launcher-(soundhax).txt
+++ b/_pages/pt_PT/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/pt_PT/installing-boot9strap-(hardmod).txt b/_pages/pt_PT/installing-boot9strap-(hardmod).txt
index 0dfd0841ad..a248182fec 100644
--- a/_pages/pt_PT/installing-boot9strap-(hardmod).txt
+++ b/_pages/pt_PT/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt b/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt
index f80a51536f..1455fca9e4 100644
--- a/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/pt_PT/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt
index 22f9074b37..6fa859a359 100644
--- a/_pages/pt_PT/installing-boot9strap-(ntrboot).txt
+++ b/_pages/pt_PT/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/pt_PT/installing-boot9strap-(pichaxx).txt b/_pages/pt_PT/installing-boot9strap-(pichaxx).txt
index 422f971aea..bcdf45aa4f 100644
--- a/_pages/pt_PT/installing-boot9strap-(pichaxx).txt
+++ b/_pages/pt_PT/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/pt_PT/installing-boot9strap-(soundhax).txt b/_pages/pt_PT/installing-boot9strap-(soundhax).txt
index 687c1d2c22..5c239d602f 100644
--- a/_pages/pt_PT/installing-boot9strap-(soundhax).txt
+++ b/_pages/pt_PT/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/pt_PT/installing-boot9strap-(usm).txt b/_pages/pt_PT/installing-boot9strap-(usm).txt
index 23cc6da0e5..8fddce3a27 100644
--- a/_pages/pt_PT/installing-boot9strap-(usm).txt
+++ b/_pages/pt_PT/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/pt_PT/seedminer.txt b/_pages/pt_PT/seedminer.txt
index 4603c260c7..e463d722db 100644
--- a/_pages/pt_PT/seedminer.txt
+++ b/_pages/pt_PT/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/pt_PT/updating-b9s.txt b/_pages/pt_PT/updating-b9s.txt
index 9634c4a681..67d0c436fe 100644
--- a/_pages/pt_PT/updating-b9s.txt
+++ b/_pages/pt_PT/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/ro_RO/a9lh-to-b9s.txt b/_pages/ro_RO/a9lh-to-b9s.txt
index 43192aec07..ce4f815acc 100644
--- a/_pages/ro_RO/a9lh-to-b9s.txt
+++ b/_pages/ro_RO/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ While we believe that custom firmware is safe for online use, there have been on
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instrucțiuni
#### Secțiunea I - Preparații
diff --git a/_pages/ro_RO/finalizing-setup.txt b/_pages/ro_RO/finalizing-setup.txt
index 81fb8576d9..21eb301bfc 100644
--- a/_pages/ro_RO/finalizing-setup.txt
+++ b/_pages/ro_RO/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ro_RO/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ro_RO/flashing-ntrboot-(3ds-multi-system).txt
index 2c9c2efba2..31ca83663e 100644
--- a/_pages/ro_RO/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/ro_RO/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Această metodă necesită acces temporar la un al doilea dispozitiv din familia
* Două dispozitive din familia 3DS
+ **3DS-ul sursă**: dispozitivul din familia 3DS care deja pornește boot9strap
+ **3DS-ul țintă**: dispozitivul pe firmware stoc
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* Cea mai recentă versiune de [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instrucțiuni
diff --git a/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt b/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt
index c740cda96f..f5b12f2068 100644
--- a/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/ro_RO/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Această metodă necesită nimic mai mult decât un 3DS stoc nemodat şi un flas
### Ce aveți nevoie
* Flashcart-ul dumneavoastră compatibil cu ntrboot
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instrucțiuni
diff --git a/_pages/ro_RO/flashing-ntrboot-(nds).txt b/_pages/ro_RO/flashing-ntrboot-(nds).txt
index e21e03dbd7..dd4a5bcc2f 100644
--- a/_pages/ro_RO/flashing-ntrboot-(nds).txt
+++ b/_pages/ro_RO/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Această metodă necesită acces temporar la un Nintendo DS sau Nintendo DS Lite
* Două dispozitive
+ **NDS/NDSL-ul sursă**: dispozitivul care este compatibil cu flashcart-ul dumneavoastră
+ **3DS-ul țintă**: dispozitivul pe firmware stoc
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instrucțiuni
diff --git a/_pages/ro_RO/homebrew-launcher-(soundhax).txt b/_pages/ro_RO/homebrew-launcher-(soundhax).txt
index a8db1f8b63..147e77e220 100644
--- a/_pages/ro_RO/homebrew-launcher-(soundhax).txt
+++ b/_pages/ro_RO/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Asigurați-vă că dispozitivul are pornit comunicarea fără fir pentru că uds
* Ultima versiune de [Soundhax](http://soundhax.com) *(pentru dispozitivul, versiunea și regiunea dumneavoastră)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Ultima versiune de [safehax](https://github.com/TiniVi/safehax/releases/latest) *(fișierul `.3dsx`)*
* Cea mai recentă versiune de [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ro_RO/installing-boot9strap-(hardmod).txt b/_pages/ro_RO/installing-boot9strap-(hardmod).txt
index 5db5d6fec2..55d8635107 100644
--- a/_pages/ro_RO/installing-boot9strap-(hardmod).txt
+++ b/_pages/ro_RO/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ Aceasta va funcționa pe New 3DS, New 2DS, Old 3DS și Old 2DS pe *toate* versiu
### Ce aveți nevoie
* Imaginea voastră NAND extrasă folosind [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Cea mai recentă versiune de [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Utilizatorii Windows pot folosi fișierul compilat `.exe`, în timp ce utilizatori de Mac și Linux vor avea nevoie de [Python 3](https://www.python.org/downloads/) instalat ca să poată rula `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt b/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt
index 812a2e3713..afa97849bc 100644
--- a/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ro_RO/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt
index 210d289321..f75dff7fc7 100644
--- a/_pages/ro_RO/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ro_RO/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Un magnet care declanșează modul de suspendare al dispozitivului (dacă se folosește un dispozitiv care se pliază)
* Flashcart-ul cu ntrboot instalat
* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instrucțiuni
diff --git a/_pages/ro_RO/installing-boot9strap-(pichaxx).txt b/_pages/ro_RO/installing-boot9strap-(pichaxx).txt
index 023bb2d207..ac0fa03102 100644
--- a/_pages/ro_RO/installing-boot9strap-(pichaxx).txt
+++ b/_pages/ro_RO/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer)
* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/ro_RO/installing-boot9strap-(soundhax).txt b/_pages/ro_RO/installing-boot9strap-(soundhax).txt
index 8f0b45d01b..a28e70ee12 100644
--- a/_pages/ro_RO/installing-boot9strap-(soundhax).txt
+++ b/_pages/ro_RO/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* Ultima versiune de [Soundhax](http://soundhax.com) *(pentru dispozitivul, versiunea și regiunea dumneavoastră)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Mergeți în `/SDCARD`, apoi apăsați "<3 nedwill 2016"
+ S-ar putea să fie nevoie să încercați de mai multe ori
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ro_RO/installing-boot9strap-(usm).txt b/_pages/ro_RO/installing-boot9strap-(usm).txt
index 560f4a03ba..56a6c4e06a 100644
--- a/_pages/ro_RO/installing-boot9strap-(usm).txt
+++ b/_pages/ro_RO/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### Ce aveți nevoie
* Fișierul 'movable.sed' de la completarea lui [Seedminer](seedminer)
+* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Secțiunea I - Preparații
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Introduceți cardul SD în calculator
1. Copiați `boot.firm` și `boot.3dsx` de la Luma3DS `.zip` pe rădăcina cardului SD
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Creați un folder numit `boot9strap` pe rădăcina cardului SD
+1. Copiați `boot9strap.firm` și `boot9strap.firm.sha` din arhiva `.zip` boot9strap în folderul `/boot9strap/` de pe cardul SD
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Secțiunea IV - Configurând Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Dispozitivul dumneavoastră ar trebui să fi repornit în meniul de configurare Luma3DS
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Porniți System Settings pe consolă
1. Navigați spre `Data Management` -> `DSiWare`
diff --git a/_pages/ro_RO/seedminer.txt b/_pages/ro_RO/seedminer.txt
index 0b16111fbf..804b990b59 100644
--- a/_pages/ro_RO/seedminer.txt
+++ b/_pages/ro_RO/seedminer.txt
@@ -20,7 +20,7 @@ Această metodă folosește o placă video puternică pentru a realiza calculele
1. Navigați către folderul `Nintendo 3DS` pe cardul SD
1. Copiați numele lung de 32 de caractere al folderului care îl vedeți în Nintendo 3DS
+ Nu accesați în alte foldere
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ro_RO/updating-b9s.txt b/_pages/ro_RO/updating-b9s.txt
index 63cefce1df..7a41ebf728 100644
--- a/_pages/ro_RO/updating-b9s.txt
+++ b/_pages/ro_RO/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### Ce aveți nevoie
* Cea mai nouă versiune de [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instrucțiuni
diff --git a/_pages/ru_RU/a9lh-to-b9s.txt b/_pages/ru_RU/a9lh-to-b9s.txt
index 3da5cb09f7..b4fb31d13d 100644
--- a/_pages/ru_RU/a9lh-to-b9s.txt
+++ b/_pages/ru_RU/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ While we believe that custom firmware is safe for online use, there have been on
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Инструкция
#### Часть I - Подготовительные работы
diff --git a/_pages/ru_RU/finalizing-setup.txt b/_pages/ru_RU/finalizing-setup.txt
index 33d0eb3894..d6f981c68b 100644
--- a/_pages/ru_RU/finalizing-setup.txt
+++ b/_pages/ru_RU/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt b/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt
index 6797a01fb6..a65eb5ab29 100644
--- a/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/ru_RU/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ title: "Прошивка ntrboot (Две консоли 3DS)"
* Две консоли семейства 3DS
+ **Исходная 3DS**: консоль семейства 3DS, на которую уже установлен boot9strap
+ **Целевая 3DS**: консоль с официальной прошивкой
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* Свежая версия [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Инструкция
diff --git a/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt b/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt
index cfb4fd569c..e05c965ea5 100644
--- a/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/ru_RU/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ title: "Прошивка ntrboot (Одна консоль 3DS)"
### Что понадобится
* Флешкартридж, совместимый с ntrboot
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Инструкция
diff --git a/_pages/ru_RU/flashing-ntrboot-(nds).txt b/_pages/ru_RU/flashing-ntrboot-(nds).txt
index 4ad3c3082b..b6c67c4589 100644
--- a/_pages/ru_RU/flashing-ntrboot-(nds).txt
+++ b/_pages/ru_RU/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ title: "Прошивка ntrboot (NDS)"
* Две консоли
+ **Исходная NDS / NDSL**: Nintendo DS или Nintendo DS Lite, совместимая с вашим флешкартриджем
+ **Целевая 3DS**: консоль семейства 3DS с официальной прошивкой
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Инструкция
diff --git a/_pages/ru_RU/homebrew-launcher-(soundhax).txt b/_pages/ru_RU/homebrew-launcher-(soundhax).txt
index b02e0ad8b3..fa52915844 100644
--- a/_pages/ru_RU/homebrew-launcher-(soundhax).txt
+++ b/_pages/ru_RU/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Soundhax (в сочетании с Homebrew Launcher) совместим с ве
* Свежая версия [Soundhax](http://soundhax.com) *(для вашего региона, консоли и версии прошивки)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Свежая версия [safehax](https://github.com/TiniVi/safehax/releases/latest) *(`.3dsx-файл`)*
* Свежая версия [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ru_RU/installing-boot9strap-(hardmod).txt b/_pages/ru_RU/installing-boot9strap-(hardmod).txt
index c430a250d9..1de9760f19 100644
--- a/_pages/ru_RU/installing-boot9strap-(hardmod).txt
+++ b/_pages/ru_RU/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
### Что понадобится
* Полученный с помощью [хардмода](https://gbatemp.net/threads/414498/) (англ.) образ NAND
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* Свежая версия [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Пользователи Windows могут воспользоваться скомпилированным `.exe-файлом`, тогда как пользователям Mac и Linux нужно иметь в системе установленный [Python 3](https://www.python.org/downloads/) для запуска `.py-файлов`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt b/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt
index 429053a048..166bae5aab 100644
--- a/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/ru_RU/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt
index 4464a13a41..e6025c0d26 100644
--- a/_pages/ru_RU/installing-boot9strap-(ntrboot).txt
+++ b/_pages/ru_RU/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* Магнит для ввода консоли в режим ожидания (если используется консоль складной конструкции)
* Флешкартридж с прошитым ntrboot
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Инструкция
diff --git a/_pages/ru_RU/installing-boot9strap-(pichaxx).txt b/_pages/ru_RU/installing-boot9strap-(pichaxx).txt
index f47890b370..8ef3cfedaf 100644
--- a/_pages/ru_RU/installing-boot9strap-(pichaxx).txt
+++ b/_pages/ru_RU/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer)
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/ru_RU/installing-boot9strap-(soundhax).txt b/_pages/ru_RU/installing-boot9strap-(soundhax).txt
index 9654eb60ec..b216f6a1f2 100644
--- a/_pages/ru_RU/installing-boot9strap-(soundhax).txt
+++ b/_pages/ru_RU/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* Свежая версия [Soundhax](http://soundhax.com) *(для вашего региона, консоли и версии прошивки)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Перейдите в `/SDCARD`, затем начните воспроизведение "<3 nedwill 2016"
+ Может потребоваться несколько попыток
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ru_RU/installing-boot9strap-(usm).txt b/_pages/ru_RU/installing-boot9strap-(usm).txt
index 80132929f5..9517d669b4 100644
--- a/_pages/ru_RU/installing-boot9strap-(usm).txt
+++ b/_pages/ru_RU/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### Что понадобится
* Ваш файл `movable.sed`, полученный на странице [Seedminer](seedminer)
+* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Часть I - Подготовительные работы
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Вставьте SD-карту в компьютер
1. Скопируйте файлы `boot.firm` и `boot.3dsx` из `.zip-архива` Luma3DS в корень SD-карты
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Создайте папку `boot9strap` в корне SD-карты
+1. Скопируйте `boot9strap.firm` и `boot9strap.firm.sha` из `.zip-архива` boot9strap в папку `/boot9strap/` в корне SD-карты
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. При запросе "Выполнить Интернет-настройки?", выберите "Выполнить"
1. В следующем меню перейдите в `Связь 1` -> `Изменить настройки` -> `Следующая страница (стрелка вправо)` -> `Настройки прокси` -> `Подробнее`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Как только вы увидите `B9S install SUCCESS` на верхнем экране, нажмите любую кнопку, чтобы перезагрузиться в меню настроек Luma
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Часть IV - Настройка Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Ваша консоль должна перезагрузиться в меню конфигурации Luma3DS
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Часть V - Восстановление профилей конфигурации WiFi
+#### Section VI - Restoring WiFi Configuration Profiles
1. Откройте Системные настройки на вашей консоли
1. Перейдите в `Управление данными` -> `DSiWare`
diff --git a/_pages/ru_RU/seedminer.txt b/_pages/ru_RU/seedminer.txt
index ddecf43ce5..fc2d9eca28 100644
--- a/_pages/ru_RU/seedminer.txt
+++ b/_pages/ru_RU/seedminer.txt
@@ -20,7 +20,7 @@ For information on how Seedminer works, see [this presentation](https://zoogie.g
1. Перейдите в папку `Nintendo 3DS` на SD-карте
1. Скопируйте имя папки из 32 символов, которую вы видите внутри папки Nintendo 3DS
+ Не заходите дальше внутрь других папок
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ru_RU/updating-b9s.txt b/_pages/ru_RU/updating-b9s.txt
index 6c8cb2164c..3d5998b8f4 100644
--- a/_pages/ru_RU/updating-b9s.txt
+++ b/_pages/ru_RU/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### Что понадобится
* Свежая версия [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Инструкция
diff --git a/_pages/sv_SE/a9lh-to-b9s.txt b/_pages/sv_SE/a9lh-to-b9s.txt
index 435f0b5248..8cfbbebdc5 100644
--- a/_pages/sv_SE/a9lh-to-b9s.txt
+++ b/_pages/sv_SE/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/sv_SE/finalizing-setup.txt b/_pages/sv_SE/finalizing-setup.txt
index b2bf088674..0a5027f501 100644
--- a/_pages/sv_SE/finalizing-setup.txt
+++ b/_pages/sv_SE/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/sv_SE/flashing-ntrboot-(3ds-multi-system).txt b/_pages/sv_SE/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/sv_SE/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/sv_SE/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt b/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt
index 4c4eb0f322..25b334dcc7 100644
--- a/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/sv_SE/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/sv_SE/flashing-ntrboot-(nds).txt b/_pages/sv_SE/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/sv_SE/flashing-ntrboot-(nds).txt
+++ b/_pages/sv_SE/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/sv_SE/homebrew-launcher-(soundhax).txt b/_pages/sv_SE/homebrew-launcher-(soundhax).txt
index e0083c6cc9..8a7115410d 100644
--- a/_pages/sv_SE/homebrew-launcher-(soundhax).txt
+++ b/_pages/sv_SE/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/sv_SE/installing-boot9strap-(hardmod).txt b/_pages/sv_SE/installing-boot9strap-(hardmod).txt
index f5d84b1d97..8d3570ebed 100644
--- a/_pages/sv_SE/installing-boot9strap-(hardmod).txt
+++ b/_pages/sv_SE/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt b/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/sv_SE/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt
index cf36b7e38f..1b3f371de2 100644
--- a/_pages/sv_SE/installing-boot9strap-(ntrboot).txt
+++ b/_pages/sv_SE/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/sv_SE/installing-boot9strap-(pichaxx).txt b/_pages/sv_SE/installing-boot9strap-(pichaxx).txt
index edb7d1b838..2fe515e7d6 100644
--- a/_pages/sv_SE/installing-boot9strap-(pichaxx).txt
+++ b/_pages/sv_SE/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/sv_SE/installing-boot9strap-(soundhax).txt b/_pages/sv_SE/installing-boot9strap-(soundhax).txt
index db18f1a6c7..abf242a7e5 100644
--- a/_pages/sv_SE/installing-boot9strap-(soundhax).txt
+++ b/_pages/sv_SE/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/sv_SE/installing-boot9strap-(usm).txt b/_pages/sv_SE/installing-boot9strap-(usm).txt
index a0e0ebebd6..0b37e1a7a1 100644
--- a/_pages/sv_SE/installing-boot9strap-(usm).txt
+++ b/_pages/sv_SE/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/sv_SE/seedminer.txt b/_pages/sv_SE/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/sv_SE/seedminer.txt
+++ b/_pages/sv_SE/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/sv_SE/updating-b9s.txt b/_pages/sv_SE/updating-b9s.txt
index 563c2eb818..b260a19161 100644
--- a/_pages/sv_SE/updating-b9s.txt
+++ b/_pages/sv_SE/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/th_TH/a9lh-to-b9s.txt b/_pages/th_TH/a9lh-to-b9s.txt
index aa693b8793..d7799c2626 100644
--- a/_pages/th_TH/a9lh-to-b9s.txt
+++ b/_pages/th_TH/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/th_TH/finalizing-setup.txt b/_pages/th_TH/finalizing-setup.txt
index 955bf39c2e..b117a19abe 100644
--- a/_pages/th_TH/finalizing-setup.txt
+++ b/_pages/th_TH/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/th_TH/flashing-ntrboot-(3ds-multi-system).txt b/_pages/th_TH/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/th_TH/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/th_TH/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt b/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt
index 5a75147d11..df642102bd 100644
--- a/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/th_TH/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/th_TH/flashing-ntrboot-(nds).txt b/_pages/th_TH/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/th_TH/flashing-ntrboot-(nds).txt
+++ b/_pages/th_TH/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/th_TH/homebrew-launcher-(soundhax).txt b/_pages/th_TH/homebrew-launcher-(soundhax).txt
index 49c0f81808..dbdc77d3d1 100644
--- a/_pages/th_TH/homebrew-launcher-(soundhax).txt
+++ b/_pages/th_TH/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/th_TH/installing-boot9strap-(hardmod).txt b/_pages/th_TH/installing-boot9strap-(hardmod).txt
index a86c8d9d62..9ba5a31b79 100644
--- a/_pages/th_TH/installing-boot9strap-(hardmod).txt
+++ b/_pages/th_TH/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/th_TH/installing-boot9strap-(kartdlphax).txt b/_pages/th_TH/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/th_TH/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/th_TH/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/th_TH/installing-boot9strap-(ntrboot).txt b/_pages/th_TH/installing-boot9strap-(ntrboot).txt
index 2bfeac8d82..29df08162c 100644
--- a/_pages/th_TH/installing-boot9strap-(ntrboot).txt
+++ b/_pages/th_TH/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/th_TH/installing-boot9strap-(pichaxx).txt b/_pages/th_TH/installing-boot9strap-(pichaxx).txt
index 9f58ed6198..c32ee66b58 100644
--- a/_pages/th_TH/installing-boot9strap-(pichaxx).txt
+++ b/_pages/th_TH/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/th_TH/installing-boot9strap-(soundhax).txt b/_pages/th_TH/installing-boot9strap-(soundhax).txt
index 3b239e54e4..452c36489d 100644
--- a/_pages/th_TH/installing-boot9strap-(soundhax).txt
+++ b/_pages/th_TH/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/th_TH/installing-boot9strap-(usm).txt b/_pages/th_TH/installing-boot9strap-(usm).txt
index 6b22c1f513..d42d29eafa 100644
--- a/_pages/th_TH/installing-boot9strap-(usm).txt
+++ b/_pages/th_TH/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/th_TH/seedminer.txt b/_pages/th_TH/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/th_TH/seedminer.txt
+++ b/_pages/th_TH/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/th_TH/updating-b9s.txt b/_pages/th_TH/updating-b9s.txt
index 656f51592a..160e4d1eb6 100644
--- a/_pages/th_TH/updating-b9s.txt
+++ b/_pages/th_TH/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/tr_TR/a9lh-to-b9s.txt b/_pages/tr_TR/a9lh-to-b9s.txt
index a2f3b509d3..7deb24c3c7 100644
--- a/_pages/tr_TR/a9lh-to-b9s.txt
+++ b/_pages/tr_TR/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/tr_TR/finalizing-setup.txt b/_pages/tr_TR/finalizing-setup.txt
index 3b506a60bf..7479d6a052 100644
--- a/_pages/tr_TR/finalizing-setup.txt
+++ b/_pages/tr_TR/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/tr_TR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/tr_TR/flashing-ntrboot-(3ds-multi-system).txt
index 778f698f29..5f0386e9b6 100644
--- a/_pages/tr_TR/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/tr_TR/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt b/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt
index 051fdca79a..f476d95490 100644
--- a/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/tr_TR/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/tr_TR/flashing-ntrboot-(nds).txt b/_pages/tr_TR/flashing-ntrboot-(nds).txt
index df82b6bb21..73b25cd7e6 100644
--- a/_pages/tr_TR/flashing-ntrboot-(nds).txt
+++ b/_pages/tr_TR/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/tr_TR/homebrew-launcher-(soundhax).txt b/_pages/tr_TR/homebrew-launcher-(soundhax).txt
index 85eef6064d..260b15b690 100644
--- a/_pages/tr_TR/homebrew-launcher-(soundhax).txt
+++ b/_pages/tr_TR/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/tr_TR/installing-boot9strap-(hardmod).txt b/_pages/tr_TR/installing-boot9strap-(hardmod).txt
index 9defee1de2..aaeb2e8bc8 100644
--- a/_pages/tr_TR/installing-boot9strap-(hardmod).txt
+++ b/_pages/tr_TR/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt b/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt
index b1b709067e..355d8e5f0f 100644
--- a/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/tr_TR/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt
index b623ea84e3..d146d253a0 100644
--- a/_pages/tr_TR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/tr_TR/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/tr_TR/installing-boot9strap-(pichaxx).txt b/_pages/tr_TR/installing-boot9strap-(pichaxx).txt
index 07d945fb4d..7604914d82 100644
--- a/_pages/tr_TR/installing-boot9strap-(pichaxx).txt
+++ b/_pages/tr_TR/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/tr_TR/installing-boot9strap-(soundhax).txt b/_pages/tr_TR/installing-boot9strap-(soundhax).txt
index 6a477784e1..f8d7941f40 100644
--- a/_pages/tr_TR/installing-boot9strap-(soundhax).txt
+++ b/_pages/tr_TR/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. `/SDCARD` gidin, "<3 nedwill 2016" dosyasını oynatın
+ Bir kaç kere denemeniz gerekebilir
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/tr_TR/installing-boot9strap-(usm).txt b/_pages/tr_TR/installing-boot9strap-(usm).txt
index afba1e0deb..1d5570bb6e 100644
--- a/_pages/tr_TR/installing-boot9strap-(usm).txt
+++ b/_pages/tr_TR/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. SD kartınızı bilgisayarınıza takın
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/tr_TR/seedminer.txt b/_pages/tr_TR/seedminer.txt
index 6bf0c99159..5e675383b2 100644
--- a/_pages/tr_TR/seedminer.txt
+++ b/_pages/tr_TR/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/tr_TR/updating-b9s.txt b/_pages/tr_TR/updating-b9s.txt
index 115267e347..6d51eead30 100644
--- a/_pages/tr_TR/updating-b9s.txt
+++ b/_pages/tr_TR/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/uk_UA/a9lh-to-b9s.txt b/_pages/uk_UA/a9lh-to-b9s.txt
index aa693b8793..d7799c2626 100644
--- a/_pages/uk_UA/a9lh-to-b9s.txt
+++ b/_pages/uk_UA/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/uk_UA/finalizing-setup.txt b/_pages/uk_UA/finalizing-setup.txt
index 955bf39c2e..b117a19abe 100644
--- a/_pages/uk_UA/finalizing-setup.txt
+++ b/_pages/uk_UA/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/uk_UA/flashing-ntrboot-(3ds-multi-system).txt b/_pages/uk_UA/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/uk_UA/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/uk_UA/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt b/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt
index 5a75147d11..df642102bd 100644
--- a/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/uk_UA/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/uk_UA/flashing-ntrboot-(nds).txt b/_pages/uk_UA/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/uk_UA/flashing-ntrboot-(nds).txt
+++ b/_pages/uk_UA/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/uk_UA/homebrew-launcher-(soundhax).txt b/_pages/uk_UA/homebrew-launcher-(soundhax).txt
index 49c0f81808..dbdc77d3d1 100644
--- a/_pages/uk_UA/homebrew-launcher-(soundhax).txt
+++ b/_pages/uk_UA/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/uk_UA/installing-boot9strap-(hardmod).txt b/_pages/uk_UA/installing-boot9strap-(hardmod).txt
index a86c8d9d62..9ba5a31b79 100644
--- a/_pages/uk_UA/installing-boot9strap-(hardmod).txt
+++ b/_pages/uk_UA/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt b/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/uk_UA/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt
index 2bfeac8d82..29df08162c 100644
--- a/_pages/uk_UA/installing-boot9strap-(ntrboot).txt
+++ b/_pages/uk_UA/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/uk_UA/installing-boot9strap-(pichaxx).txt b/_pages/uk_UA/installing-boot9strap-(pichaxx).txt
index 9f58ed6198..c32ee66b58 100644
--- a/_pages/uk_UA/installing-boot9strap-(pichaxx).txt
+++ b/_pages/uk_UA/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/uk_UA/installing-boot9strap-(soundhax).txt b/_pages/uk_UA/installing-boot9strap-(soundhax).txt
index 3b239e54e4..452c36489d 100644
--- a/_pages/uk_UA/installing-boot9strap-(soundhax).txt
+++ b/_pages/uk_UA/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/uk_UA/installing-boot9strap-(usm).txt b/_pages/uk_UA/installing-boot9strap-(usm).txt
index 6b22c1f513..d42d29eafa 100644
--- a/_pages/uk_UA/installing-boot9strap-(usm).txt
+++ b/_pages/uk_UA/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/uk_UA/seedminer.txt b/_pages/uk_UA/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/uk_UA/seedminer.txt
+++ b/_pages/uk_UA/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/uk_UA/updating-b9s.txt b/_pages/uk_UA/updating-b9s.txt
index 656f51592a..160e4d1eb6 100644
--- a/_pages/uk_UA/updating-b9s.txt
+++ b/_pages/uk_UA/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/vi_VN/a9lh-to-b9s.txt b/_pages/vi_VN/a9lh-to-b9s.txt
index aa693b8793..d7799c2626 100644
--- a/_pages/vi_VN/a9lh-to-b9s.txt
+++ b/_pages/vi_VN/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ Note that, only on New 3DS, `secret_sector.bin` is needed to revert the arm9load
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The v7.0.5 release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(the `.7z` file)*
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### Instructions
#### Section I - Prep Work
diff --git a/_pages/vi_VN/finalizing-setup.txt b/_pages/vi_VN/finalizing-setup.txt
index 955bf39c2e..b117a19abe 100644
--- a/_pages/vi_VN/finalizing-setup.txt
+++ b/_pages/vi_VN/finalizing-setup.txt
@@ -167,7 +167,7 @@ Here are some key combos that you should know:
- Holding (Select) on boot will launch the Luma3DS configuration menu.
- Holding (Start) on boot will launch GodMode9, or if you have multiple payloads in `/luma/payloads/`, the Luma3DS chainloader.
- By default, pressing (Left Shoulder) + (Down D-Pad) + (Select) while in 3DS mode will open the Rosalina menu, where you can check system information, take screenshots, enable cheats, and more. This can be changed from the Rosalina menu.
-- Holding (Start) + (Select) + (X) on boot will dump `boot9.bin`, `boot11.bin`, and `otp.bin` to the `boot9strap` folder on your SD card. The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/vi_VN/flashing-ntrboot-(3ds-multi-system).txt b/_pages/vi_VN/flashing-ntrboot-(3ds-multi-system).txt
index 2f9aad2265..2a127e6c82 100644
--- a/_pages/vi_VN/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/vi_VN/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two 3DS family devices
+ **The source 3DS**: the 3DS family device that is already running boot9strap
+ **The target 3DS**: the device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### Instructions
diff --git a/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt b/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt
index 5a75147d11..df642102bd 100644
--- a/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/vi_VN/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
### What You Need
* Your ntrboot compatible flashcart
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/vi_VN/flashing-ntrboot-(nds).txt b/_pages/vi_VN/flashing-ntrboot-(nds).txt
index 7c9c687a1f..5c75a3f532 100644
--- a/_pages/vi_VN/flashing-ntrboot-(nds).txt
+++ b/_pages/vi_VN/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ Note that in some rare circumstances, it may be possible for the flashing proces
* Two devices
+ **The source NDS / NDSL**: the Nintendo DS or Nintendo DS Lite which is compatible with your flashcart
+ **The target 3DS**: the 3DS family device on stock firmware
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* The latest release of [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### Instructions
diff --git a/_pages/vi_VN/homebrew-launcher-(soundhax).txt b/_pages/vi_VN/homebrew-launcher-(soundhax).txt
index 49c0f81808..dbdc77d3d1 100644
--- a/_pages/vi_VN/homebrew-launcher-(soundhax).txt
+++ b/_pages/vi_VN/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Ensure your device's Wireless Communication is turned on as udsploit (used in th
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [safehax](https://github.com/TiniVi/safehax/releases/latest) *(the `.3dsx` file)*
* The latest release of [udsploit](https://github.com/smealum/udsploit/releases/latest)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/vi_VN/installing-boot9strap-(hardmod).txt b/_pages/vi_VN/installing-boot9strap-(hardmod).txt
index a86c8d9d62..9ba5a31b79 100644
--- a/_pages/vi_VN/installing-boot9strap-(hardmod).txt
+++ b/_pages/vi_VN/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ This will work on New 3DS, New 2DS, Old 3DS, and Old 2DS on *all* versions that
### What You Need
* Your NAND image extracted using your [hardmod](https://gbatemp.net/threads/414498/)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest version of [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows users can use the compiled `.exe`, while Mac and Linux users will need to have [Python 3](https://www.python.org/downloads/) installed to run the `.py`
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt b/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt
index 544d1dbeee..8155870e78 100644
--- a/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/vi_VN/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [standard Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### Section I - Prep Work (source 3DS)
diff --git a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt
index 2bfeac8d82..29df08162c 100644
--- a/_pages/vi_VN/installing-boot9strap-(ntrboot).txt
+++ b/_pages/vi_VN/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* A magnet that triggers the sleep mode of your device (if using a folding style device)
* Your ntrboot flashed flashcart
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/vi_VN/installing-boot9strap-(pichaxx).txt b/_pages/vi_VN/installing-boot9strap-(pichaxx).txt
index 9f58ed6198..c32ee66b58 100644
--- a/_pages/vi_VN/installing-boot9strap-(pichaxx).txt
+++ b/_pages/vi_VN/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ Your SD card must be inserted in your device to install Pokémon Picross
* Your `movable.sed` file from completing [Seedminer](seedminer)
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/vi_VN/installing-boot9strap-(soundhax).txt b/_pages/vi_VN/installing-boot9strap-(soundhax).txt
index 3b239e54e4..452c36489d 100644
--- a/_pages/vi_VN/installing-boot9strap-(soundhax).txt
+++ b/_pages/vi_VN/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
* The latest release of [Soundhax](http://soundhax.com) *(for your region, device, and version)*
+ If Soundhax appears in your browser as an unplayable video, press Ctrl+S or Cmd+S to save it to your computer
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* The latest release of [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (when combined with universal-otherapp) is compatible with versions 1.0
1. Go to `/SDCARD`, then play "<3 nedwill 2016"
+ This may take many tries
+ If it freezes, force the console to power off by holding the power button, then try again
- + If your console displays a red and white screen *and* your console is on system version 9.4.0, 9.5.0, or 9.6.0, try following [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/vi_VN/installing-boot9strap-(usm).txt b/_pages/vi_VN/installing-boot9strap-(usm).txt
index 6b22c1f513..d42d29eafa 100644
--- a/_pages/vi_VN/installing-boot9strap-(usm).txt
+++ b/_pages/vi_VN/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
### What You Need
* Your `movable.sed` file from completing [Seedminer](seedminer)
+* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### Section I - Prep Work
1. If your device is powered on, power off your device
@@ -34,6 +37,9 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. Insert your SD card into your computer
1. Copy `boot.firm` and `boot.3dsx` from the Luma3DS `.zip` to the root of your SD card
+ The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. Create a folder named `boot9strap` on the root of your SD card
+1. Copy `boot9strap.firm` and `boot9strap.firm.sha` from the boot9strap `.zip` to the `/boot9strap/` folder on your SD card
+1. Copy `SafeB9SInstaller.bin` from the SafeB9SInstaller `.zip` to the root of your SD card
1. Copy `usm.bin` from `unSAFE_MODE.zip` to the root of your SD card
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ If your (Right/Left Shoulder), (D-Pad Up), or (A) buttons do not work, you will
1. When asked "Would you like to configure Internet settings?", select "Yes"
1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ This is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
-1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+1. If the exploit was successful, your device will have booted into SafeB9SInstaller
-#### Section IV - Configuring Luma3DS
+#### Section IV - Installing boot9strap
+
+1. When prompted, input the key combo given on the top screen to install boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. Once it is complete, press (A) to reboot your device
+
+#### Section V - Configuring Luma3DS
1. Your device should have rebooted into the Luma3DS configuration menu
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ At this point, your console will boot to Luma3DS by default as long as the SD ca
+ Luma3DS does not look any different from the normal HOME Menu. If your console has booted into the HOME Menu, it is running custom firmware.
+ On the next page, you will copy Luma3DS to internal memory so that you can boot without an SD card.
-#### Section V - Restoring WiFi Configuration Profiles
+#### Section VI - Restoring WiFi Configuration Profiles
1. Launch System Settings on your device
1. Navigate to `Data Management` -> `DSiWare`
diff --git a/_pages/vi_VN/seedminer.txt b/_pages/vi_VN/seedminer.txt
index 2f354c6ed9..c99db98353 100644
--- a/_pages/vi_VN/seedminer.txt
+++ b/_pages/vi_VN/seedminer.txt
@@ -20,7 +20,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
1. Navigate to the `Nintendo 3DS` folder on your SD card
1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
+ Do not go inside any more folders
- + If you see multiple folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/vi_VN/updating-b9s.txt b/_pages/vi_VN/updating-b9s.txt
index 656f51592a..160e4d1eb6 100644
--- a/_pages/vi_VN/updating-b9s.txt
+++ b/_pages/vi_VN/updating-b9s.txt
@@ -14,7 +14,7 @@ While we believe that custom firmware is safe for online use, there have been on
### What You Need
* The latest release of [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; not the `devkit` file, not the `ntr` file)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* The latest release of [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### Instructions
diff --git a/_pages/zh_CN/a9lh-to-b9s.txt b/_pages/zh_CN/a9lh-to-b9s.txt
index 4e8b61f779..a20ede417c 100644
--- a/_pages/zh_CN/a9lh-to-b9s.txt
+++ b/_pages/zh_CN/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ title: "A9LH 升级 B9S"
* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* 7.0.5 版本的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *（`.7z` 文件）*
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### 操作步骤
#### 第一步 – 准备工作
diff --git a/_pages/zh_CN/finalizing-setup.txt b/_pages/zh_CN/finalizing-setup.txt
index 1e8abfbd21..8132c8277a 100644
--- a/_pages/zh_CN/finalizing-setup.txt
+++ b/_pages/zh_CN/finalizing-setup.txt
@@ -167,7 +167,7 @@ ___
- 关机时按住 “Select” 键，然后按下电源键开机以进入 Luma3DS 的配置菜单。
- 关机时按住 “Start” 键，然后按下电源键开机以启动 Godmode9；如果 `/luma/payloads/` 文件夹下有多个 payload 文件，则会自动进入 Luma3DS chainloader。
- 默认情况下，在主机开机时按下 L + ↓ + SELECT 键将会打开 Rosalina 菜单，它有用来检查系统信息、截屏、开启金手指等等的功能。 Rosalina 菜单的快捷键可以在其中更改。
-- 关机时，按住 START + SELECT + X 键，然后按下电源键开机，这将会导出 `boot9.bin`、`boot11.bin` 和 `otp.bin` 到你的 SD 卡的 `boot9strap` 文件夹中 如果 `boot9strap` 文件夹不存在，将会被创建。
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt b/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt
index 48ca8a6263..04eb294bec 100644
--- a/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ title: "写入 ntrboot 漏洞（通过多台 3DS）"
* 两台 3DS 主机
+ ** 3DS **：已经破解了 boot9strap 的 3DS
+ ** 目标 3DS **：运行原厂系统的 3DS
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 最新版 [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt
index b5a5a6fec2..d31b7eb7da 100644
--- a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ title: "写入 ntrboot 漏洞（通过单台 3DS）"
### 你需要准备点啥？
* 一张兼容 ntrboot 的烧录卡
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 最新版 [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/flashing-ntrboot-(nds).txt b/_pages/zh_CN/flashing-ntrboot-(nds).txt
index a5e2697566..87e4dbef9b 100644
--- a/_pages/zh_CN/flashing-ntrboot-(nds).txt
+++ b/_pages/zh_CN/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ title: "写入 ntrboot 漏洞（通过 NDS）"
* 两台主机
+ **源 NDS / NDSL**：与你的烧录卡兼容的 Nintendo DS 或 Nintendo DS Lite
+ **目标 3DS**：运行原版系统的 3DS
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 最新版 [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/homebrew-launcher-(soundhax).txt b/_pages/zh_CN/homebrew-launcher-(soundhax).txt
index c51bb00bae..b4bbdc1566 100644
--- a/_pages/zh_CN/homebrew-launcher-(soundhax).txt
+++ b/_pages/zh_CN/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Soundhax（与 Homebrew Launcher 一起使用时）与欧版、日版、韩版
* 最新版 [Soundhax](http://soundhax.com/) **（根据你的 3DS 的区域、型号和版本下载）**
+ 如果点击下载 Soundhax 后浏览器跳转到了一个不可播放的视频，那么请按 Ctrl+S 或 Cmd+S 键将其保存到你的电脑上
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap] (https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版 [safehax](https://github.com/TiniVi/safehax/releases/latest) **（下载 `.3dsx` 文件）**
* 最新版 [udsploit](https://github.com/smealum/udsploit/releases/latest)
* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/zh_CN/installing-boot9strap-(hardmod).txt b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
index 682c2e9ca5..fd629fc470 100644
--- a/_pages/zh_CN/installing-boot9strap-(hardmod).txt
+++ b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ title: "安装 boot9strap（通过硬改）"
### 你需要准备点啥？
* 通过[硬改](https://gbatemp.net/threads/414498/)导出的 NAND 镜像。
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows用户可以使用已编译的 “.exe” 程序，而 Mac 以及 Linux 用户则需要安装 [Python 3](https://www.python.org/downloads/) 来打开 “.py” 文件。
* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt b/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt
index 81433445fa..ad37f139b1 100644
--- a/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ kartdlphax 是马里奥赛车 7 中下载通信模式中的一个漏洞。 它
在**目标 3DS**（你试图破解的 3DS）上：
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### 第一步 – 准备工作（源 3DS）
diff --git a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
index 77a700e171..519310f8ba 100644
--- a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
+++ b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ title: "安装boot9strap (通过 ntrboot)"
* 一块用来触发主机的休眠模式的磁铁（只适用于折叠式主机）
* 一张已经写入 ntrboot 漏洞的烧录卡
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/installing-boot9strap-(pichaxx).txt b/_pages/zh_CN/installing-boot9strap-(pichaxx).txt
index 33022514ad..90c52d3767 100644
--- a/_pages/zh_CN/installing-boot9strap-(pichaxx).txt
+++ b/_pages/zh_CN/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ title: "安装 boot9strap（通过 PicHaxx）"
+ 你必须插入一张 SD 卡到主机中才能安装《宝可梦：绘图方块》。
* 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* 最新版 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/zh_CN/installing-boot9strap-(soundhax).txt b/_pages/zh_CN/installing-boot9strap-(soundhax).txt
index a52de700a7..68b622c720 100644
--- a/_pages/zh_CN/installing-boot9strap-(soundhax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax（和 universal-otherapp 一起使用时）与所有区域 1.0.0 至 11
* 最新版 [Soundhax](http://soundhax.com/) **（根据你的 3DS 的区域、型号和版本下载）**
+ 如果点击下载 Soundhax 后浏览器跳转到了一个不可播放的视频，那么请按 Ctrl+S 或 Cmd+S 键将其保存到你的电脑上
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* 最新版 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax（和 universal-otherapp 一起使用时）与所有区域 1.0.0 至 11
1. 进入 `/sdcard`，然后播放“< 3 nedwill 2016”
+ 有可能需要反复尝试几次
+ 如果主机死机了，请长按电源键关闭主机，然后再试一次
- + 如果你的主机闪过了红色和白色的界面，*而*你的主机系统版本在 9.4.0、9.5.0、9.6.0之间，请尝试 [启动 Homebrew Launcher （通过 Soundhax）](homebrew-launcher-(soundhax))
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/zh_CN/installing-boot9strap-(usm).txt b/_pages/zh_CN/installing-boot9strap-(usm).txt
index dcf32f83e5..d5929b1fac 100644
--- a/_pages/zh_CN/installing-boot9strap-(usm).txt
+++ b/_pages/zh_CN/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ title: "安装 boot9strap（通过 USM）"
### 你需要准备点啥？
* 你在 [Seedminer](seedminer) 步骤中获得的 `movable.sed` 文件
+* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### 第一步 – 准备工作
1. 如果你的主机已经被你开机了，那么将其关机
@@ -34,6 +37,9 @@ title: "安装 boot9strap（通过 USM）"
1. 将你的 SD 卡插入到电脑
1. 解压 Luma3DS `.zip` 里的 `boot.firm` 和 `boot.3dsx` 到你 SD 卡的根目录
+ 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
+1. 在 SD 卡根目录创建一个名为 `boot9strap` 的文件夹
+1. 从boot9strap `.zip` 文件中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你SD卡的 `/boot9strap/` 文件夹中
+1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.bin` 到 SD 卡根目录下
1. 从 `unSAFE_MODE.zip` 复制 `usm.bin` 到 SD 卡的根目录
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ title: "安装 boot9strap（通过 USM）"
1. 当系统问你“你想要配置互联网设置吗？（Would you like to configure Internet settings?）”时，点击 “Yes”
1. 在接下来出现的菜单中，进入到 `连接点 1（Connection 1）` -> `更改设置（Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy Settings）` -> `详细设置（Detailed Setup）`
+ 这里有一份[演示图像](https://uwuu.ca/images/safemode_highlighted.png)
-1. 然后你应该会看到上屏提示 `B9S install SUCCESS`，然后你就可以按下任意键重启到 Luma 设置了
+1. 如果漏洞执行成功，你的主机将会进入到 SafeB9SInstaller
-#### 第四步 – 设置 Luma3DS
+#### Section IV - Installing boot9strap
+
+1. 出现提示时，按照上屏的提示输入按键组合来安装 boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. 安装完成后，按下 “A” 键重启主机
+
+#### 第五步 – 配置 Luma3DS
1. 你的主机将会在重启后进入至 Luma3DS 配置菜单中
+ 你可以随时在主机关机的情况下，按住 SELECT 键，然后按下电源键开机来进入 Luma3DS 配置菜单
@@ -86,7 +98,7 @@ title: "安装 boot9strap（通过 USM）"
+ Luma3DS 不会给正常的主菜单增添任何看上去十分特别的东西。 如果你的主机现在已经启动到主菜单了，说明自制固件已经在运行了。
+ 在下一页中，我们将会教你复制 Luma3DS 到内部存储当中，使得主机能在没有 SD 卡的情况下启动系统。
-#### 第五步 – 还原 WiFi 配置文件
+#### Section VI - Restoring WiFi Configuration Profiles
1. 启动你主机上的 “系统设置(System settings)”
1. 进入到 `数据管理（Data Management）` -> `DSiWare`
diff --git a/_pages/zh_CN/seedminer.txt b/_pages/zh_CN/seedminer.txt
index bdd12b7736..dbb8c9e9f8 100644
--- a/_pages/zh_CN/seedminer.txt
+++ b/_pages/zh_CN/seedminer.txt
@@ -20,7 +20,7 @@ title: "Seedminer"
1. 打开你 SD 卡的 `Nintendo 3DS` 文件夹
1. 复制你在 Nintendo 3DS 文件夹内看到的 32 位字符文件夹的名称
+ 不要再点进任何文件夹
- + 如果你看到了多个文件夹，请[参考这些步骤](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)来解决
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/zh_CN/updating-b9s.txt b/_pages/zh_CN/updating-b9s.txt
index 7c06e20ff5..e6a3625a76 100644
--- a/_pages/zh_CN/updating-b9s.txt
+++ b/_pages/zh_CN/updating-b9s.txt
@@ -14,7 +14,7 @@ title: "更新 B9S"
### 你需要准备点啥？
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `boot9strap-1.3.zip` 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### 操作步骤
diff --git a/_pages/zh_TW/a9lh-to-b9s.txt b/_pages/zh_TW/a9lh-to-b9s.txt
index f2b7fe9e30..1be6c97028 100644
--- a/_pages/zh_TW/a9lh-to-b9s.txt
+++ b/_pages/zh_TW/a9lh-to-b9s.txt
@@ -29,7 +29,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* 最新版的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* 7.0.5 版的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/tag/v7.0.5) *(`.7z` 檔案)*
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
### 操作說明
#### 第一節 — 準備工作
diff --git a/_pages/zh_TW/contribute.txt b/_pages/zh_TW/contribute.txt
index e8e4cd0dfb..ade4c2df48 100644
--- a/_pages/zh_TW/contribute.txt
+++ b/_pages/zh_TW/contribute.txt
@@ -14,13 +14,13 @@ title: "貢獻"
## 做種
-本手冊中大部分的檔案只提供 Torrent 種子。 如果您想幫助做種以確保其未來的可用性，您可以下載包含所有 `.torrent` 檔案：[torrents.zip](assets/torrents.zip) 的 `.zip` 檔案（ 最後更新於2022-01-21）
+本手冊中大部分的檔案只提供 Torrent 種子。 如果您想幫助做種以確保其未來的可用性，您可以下載包含所有 `.torrent` 檔案：[torrents.zip](assets/torrents.zip) 的 `.zip` 檔案( 最後更新於2022-01-21)
There is also an [RSS feed]({{ "rss.xml" | absolute_url }}) that may be updated for future torrents, which you can subscribe to.
## 贊助
-維護本手冊的內容（以及我們的支援管道）主要是由各個志工所提供的，但如果本手冊對您來說非常有幫助，我們也歡迎您提出金援贊助。
+維護本手冊的內容(以及我們的支援管道)主要是由各個志工所提供的，但如果本手冊對您來說非常有幫助，我們也歡迎您提出金援贊助。
[![Paypal]({{ "/images/paypal_white.png" | absolute_url }}){:height="72px" width="256px"}{: style="padding-bottom: .35em"}](https://paypal.me/NintendoHomebrew){: .align-center}
[https://paypal.me/NintendoHomebrew](https://paypal.me/NintendoHomebrew)
diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt
index 18a46eb20b..bad768cc2f 100644
--- a/_pages/zh_TW/finalizing-setup.txt
+++ b/_pages/zh_TW/finalizing-setup.txt
@@ -167,7 +167,7 @@ ___
- 開機時，按住『Select』鍵將會進入 Luma3DS 的設定選單。
- 開機時，按住『Start』鍵將會進入 GodMode9 選單；或者如果你的 `/luma/payloads/` 資料夾中有多個 Payload，則會進入 Luma3DS 加載選單。
- 預設情況下，在 3DS 模式下按住 『L』鍵 +『下』鍵 +『Select』鍵，將會開啟 Rosalina 選單；在本選單中，你能檢視系統資訊、進行截圖、開啟作弊、及其他功能。 這可以從 Rosalina 選單更改。
-- 開機時，按住『Start』鍵 +『Select』鍵 +『X』鍵，將會自動把 `boot9.bin`、`boot11.bin`、`otp.bin` 等檔案自動轉存至您的 SD 卡 `boot9strap` 資料夾中。 The `boot9strap` folder will be created if it does not already exist.
+- Holding (Start) + (Select) + (X) on boot will make the notification LED show a color for debug purposes. See the [changelog](https://github.com/SciresM/boot9strap/releases/tag/1.4) for a list.
{% endcapture %}
{{ notice-6 | markdownify }}
diff --git a/_pages/zh_TW/flashing-ntrboot-(3ds-multi-system).txt b/_pages/zh_TW/flashing-ntrboot-(3ds-multi-system).txt
index 792e5dbf60..94a73567fe 100644
--- a/_pages/zh_TW/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/zh_TW/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ title: "寫入 ntrboot 漏洞 (透過多台 3DS 系統)"
* 兩台 3DS 系列主機
+ **3DS 始源機**：一台已安裝 boot9strap 的 3DS 系列主機
+ **3DS 目標機**：一台已搭載原廠系統的主機
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 最新版的 [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### 操作說明
diff --git a/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt b/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt
index c78845aceb..4c3c12d2d4 100644
--- a/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/zh_TW/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ title: "寫入 ntrboot 漏洞 (透過單台 3DS 系統)"
### 必備項目
* 一張相容於 ntrboot 的燒錄卡
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 最新版的 [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 操作說明
diff --git a/_pages/zh_TW/flashing-ntrboot-(nds).txt b/_pages/zh_TW/flashing-ntrboot-(nds).txt
index b2af749c90..79789dbd61 100644
--- a/_pages/zh_TW/flashing-ntrboot-(nds).txt
+++ b/_pages/zh_TW/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ title: "寫入 ntrboot 漏洞 (透過 NDS)"
* 兩台主機
+ **始源 NDS / NDSL 主機**：一台可搭配您的燒錄卡使用的任天堂 DS 或 DS Lite 主機
+ **3DS 目標機**：一台已搭載原廠系統的 3DS 系列主機
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3-ntr.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4-ntr.zip)
* 最新版的 [ntrboot_flasher_nds](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 操作說明
diff --git a/_pages/zh_TW/homebrew-launcher-(soundhax).txt b/_pages/zh_TW/homebrew-launcher-(soundhax).txt
index fc2dba6c9e..db23387512 100644
--- a/_pages/zh_TW/homebrew-launcher-(soundhax).txt
+++ b/_pages/zh_TW/homebrew-launcher-(soundhax).txt
@@ -17,7 +17,7 @@ Soundhax (與 Homebrew Launcher 使用時) 可與韌體版本 9.0.0 至 11.3.0
* 最新版的 [Soundhax](http://soundhax.com) *(對應您主機的區域、型號、及版本的檔案)*
+ 如果您下載 Soundhax 時，您的瀏覽器顯示了一個不可播放的影片，透過 Ctrl+S 或 Cmd+S 將此檔案存至電腦中
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版的 [safehax](https://github.com/TiniVi/safehax/releases/latest) *(`.3dsx` 檔案)*
* 最新版的 [udsploit](https://github.com/smealum/udsploit/releases/latest)
* 最新版的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/zh_TW/installing-boot9strap-(hardmod).txt b/_pages/zh_TW/installing-boot9strap-(hardmod).txt
index 461f715311..f6806a10c8 100644
--- a/_pages/zh_TW/installing-boot9strap-(hardmod).txt
+++ b/_pages/zh_TW/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
### 必備項目
* 透過[硬改](https://gbatemp.net/threads/414498/)提取您主機的 NAND 鏡像檔
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版的 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows 使用者可使用已編譯的 `.exe` 檔，而 Mac 及 Linux 使用者得先安裝 [Python 3](https://www.python.org/downloads/) 才能執行 `.py` 檔
* 最新版的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
diff --git a/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt b/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt
index 95e0af7497..cd6182c341 100644
--- a/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt
+++ b/_pages/zh_TW/installing-boot9strap-(kartdlphax).txt
@@ -24,7 +24,7 @@ On the **source 3DS** (the 3DS with custom firmware):
On the **target 3DS** (the 3DS that you are trying to modify):
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版的 [一般 Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
#### 第一步 – 準備工作(目標 3DS)
diff --git a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
index f5960eba4f..eca2373da1 100644
--- a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
+++ b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this
* 一塊能使您主機進入睡眠模式的磁鐵 (僅適用於折疊式主機)
* 一張已寫入 ntrboot 漏洞的燒錄卡
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### 操作說明
diff --git a/_pages/zh_TW/installing-boot9strap-(pichaxx).txt b/_pages/zh_TW/installing-boot9strap-(pichaxx).txt
index ecbabb735b..8d3e9afda4 100644
--- a/_pages/zh_TW/installing-boot9strap-(pichaxx).txt
+++ b/_pages/zh_TW/installing-boot9strap-(pichaxx).txt
@@ -18,7 +18,7 @@ This process will overwrite your Pokémon Picross save file, if you have one. If
+ 你必須插入一張 SD 卡到主機中才能安裝『寶可夢繪圖方塊 (Pokémon Picross)』。
* 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* 最新版的 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
diff --git a/_pages/zh_TW/installing-boot9strap-(soundhax).txt b/_pages/zh_TW/installing-boot9strap-(soundhax).txt
index 5665f033f3..c42fff96f0 100644
--- a/_pages/zh_TW/installing-boot9strap-(soundhax).txt
+++ b/_pages/zh_TW/installing-boot9strap-(soundhax).txt
@@ -13,7 +13,7 @@ Soundhax (與 universal-otherapp 使用時) 可與韌體版本 1.0.0 至 11.3.0
* 最新版的 [Soundhax](http://soundhax.com) *(對應您主機的區域、型號、及版本的檔案)*
+ 如果您下載 Soundhax 時，您的瀏覽器顯示了一個不可播放的影片，透過 Ctrl+S 或 Cmd+S 將此檔案存至電腦中
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.3/boot9strap-1.3.zip)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
* 最新版的 [universal-otherapp](https://github.com/TuxSH/universal-otherapp/releases/latest)
@@ -50,7 +50,6 @@ Soundhax (與 universal-otherapp 使用時) 可與韌體版本 1.0.0 至 11.3.0
1. 選擇『/SDCARD』，並播放『<3 nedwill 2016』
+ 可能需要嘗試多次
+ 如果當機的話，透過電源按鈕將您的主機強制關機，並再試一次
- + 如果您的主機出現了紅白畫面，且您的主機版本為 9.4.0、9.5.0、或 9.6.0，試著遵循 [安裝 Homebrew Launcher (透過 Soundhax)](homebrew-launcher-(soundhax)) 中的指示
![]({{ "/images/screenshots/soundhax-launch.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/zh_TW/installing-boot9strap-(usm).txt b/_pages/zh_TW/installing-boot9strap-(usm).txt
index 14218ae313..d046dea7c4 100644
--- a/_pages/zh_TW/installing-boot9strap-(usm).txt
+++ b/_pages/zh_TW/installing-boot9strap-(usm).txt
@@ -22,8 +22,11 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
### 必備項目
* 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案
+* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
+
#### 第一節 — 準備工作
1. 如果您的主機正處於開機狀態，那麼請將其關機
@@ -34,6 +37,9 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
1. 將 SD 卡插入至電腦中
1. 解壓 Luma3DS `.zip` 內的 `boot.firm` 與 `boot.3dsx` 到 SD 卡的根目錄底下
+ 「SD 卡的根目錄」指的是你的 SD 卡含有 Nintendo 3DS 資料夾的目錄，而非該資料夾內部
+1. 在 SD 卡的根目錄底下建立一個新的資料夾 `boot9strap`
+1. 解壓 boot9strap `.zip` 的 `boot9strap.firm` 及 `boot9strap.firm.sha` 檔案至 SD 卡的 `/boot9strap/` 資料夾中
+1. 將 SafeB9SInstaller `.zip` 中的 `SafeB9SInstaller.bin` 複製到 SD 卡的根目錄
1. 解壓 `unSAFE_MODE.zip` 內的 `usm.bin` 到 SD 卡的根目錄底下
+ ![]({{ "/images/screenshots/usm-root-layout.png" | absolute_url }})
{: .notice--info}
@@ -71,9 +77,15 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
1. 當系統提示您『你想要配置網路設置嗎? (Would you like to configure Internet settings?)』時，點選『Yes』
1. 在接下來出現的選單中，移動至 `連接點 1(Connection 1)` -> `更改設定(Change Settings)` -> `下一頁 (右箭頭)` -> `代理設置(Proxy Settings)` -> `詳細設置(Detailed Setup)`
+ 如[本圖中所示](https://uwuu.ca/images/safemode_highlighted.png)
-1. 您應該會看到上方的螢幕顯示 `B9S install SUCCESS`，按下任意鍵以重啟至 Luma 設定中
+1. 如果一切成功的話，您將自動進入 SafeB9SInstaller
-#### 第四節 — 設定 Luma3DS
+#### Section IV - Installing boot9strap
+
+1. 出現提示時，輸入上方螢幕所顯示的按鍵組合以安裝 boot9strap
+ + If the top screen is blank, power off your device and re-do Section III
+1. 過程結束後，按下『A』重啟主機
+
+#### 第五節 — 設定 Luma3DS
1. 您的主機將會重啟至 Luma3DS 設定選單中
+ You can access the Luma3DS configuration menu at any time by powering off, holding SELECT, then powering on your device while still holding SELECT
@@ -86,7 +98,7 @@ To accomplish this, we use your system's encryption key (movable.sed) to build a
+ Luma3DS 不會特別在 HOME 主選單中新增任何特別的東西。 如果你的主機已經啟動到了 HOME 主選單，這代表自製韌體已經在運行了。
+ 在下一頁中，我們將會教你複製 Luma3DS 到內存中，使得主機能在沒有 SD 卡的情況下啟動系統。
-#### 第五步 — 還原 WiFi 設定檔
+#### Section VI - Restoring WiFi Configuration Profiles
1. 於您主機上啟動系統設定 (System Settings)
1. 移動至 `檔案管理 (Data Management)` -> `DSiWare`
diff --git a/_pages/zh_TW/seedminer.txt b/_pages/zh_TW/seedminer.txt
index 86d7f86d06..c2740b29b8 100644
--- a/_pages/zh_TW/seedminer.txt
+++ b/_pages/zh_TW/seedminer.txt
@@ -20,7 +20,7 @@ title: "Seedminer"
1. 移動至 SD 卡的 `Nintendo 3DS` 資料夾中
1. 複製您在Nintendo 3DS 資料夾看到的32個字元長的資料夾名稱
+ 請不要再點擊任何一個資料夾
- + 如果您看到多個資料夾，請遵循[此疑難排解步驟](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
+ + If you see multiple 32 character long folders, follow [these instructions](troubleshooting#multiple-long-folder-names-in-nintendo-3ds-folder)
![]({{ "/images/screenshots/id0-example.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/zh_TW/updating-b9s.txt b/_pages/zh_TW/updating-b9s.txt
index 075d8cb4c6..23e4bd2dd7 100644
--- a/_pages/zh_TW/updating-b9s.txt
+++ b/_pages/zh_TW/updating-b9s.txt
@@ -14,7 +14,7 @@ title: "更新 B9S" #
### 必備項目
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(`boot9strap-1.3.zip`; 而非含有 `devkit` 或 `ntr` 檔案)*
+* The latest release of [boot9strap](https://github.com/SciresM/boot9strap/releases/download/1.4/boot9strap-1.4.zip)
* 最新版的 [Luma3DS](https://github.com/LumaTeam/Luma3DS/releases/latest)
### 操作說明