_sysnand_###.bin.sha` fájlokat az SD kártyád `/gm9/out/` mappájából, miután lemásoltad azokat
1. **Készíts az SD kártyádon található fájlokról biztonsági másolatot a számítógépedre; a következő lépésekben minden fájl törlődni fog róla**
-#### Nyolcadik rész - SD kártya formázása
+#### VIII. rész - SD kártya formázása
1. Tedd vissza az SD kártyád a készülékedbe
1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü
diff --git a/_pages/hu_HU/ntrboot.txt b/_pages/hu_HU/ntrboot.txt
index 4c507fb4e0..78c714fa15 100644
--- a/_pages/hu_HU/ntrboot.txt
+++ b/_pages/hu_HU/ntrboot.txt
@@ -17,23 +17,23 @@ Vedd figyelembe, hogy a "Time Bomb"-bal rendelkező kártyák nem lesznek képes
| Flashkártya neve | Jelenlegi ár | "Time Bomb"? | 3DS verziók? | DSi verziók? | Megjegyzések |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
-| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
-| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. A 2013-as modellek nem kompatibilisek. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. A 2013-as modellek nem kompatibilisek. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | 2019. szeptember 3. | <= 11.14.0 | <= 1.4.5 | **Előflashelt ntrboot-tal érkezik**; visszaflashelhető NDS flashkártyára. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | Nem | <= 11.14.0 | <= 1.4.5 | **Előflashelt ntrboot-tal érkezik** ([belső kapcsoló az ntrboot és az NDS módok között]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); ne flasheljen kézzel ntrboot-ot. |
+| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | nem | <= 4.3.0 | <= 1.4.4 | |
+| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | nem | nincs | nincs | Csak [bizonyos flash chipek](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) kompatibilisek az ntrboot-tal. |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | Minden RTS revízióval kompatibilis. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: 2019. szeptember 3. | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: 2019. szeptember 3. | <= 11.14.0 | <= 1.4.5 | Minden R4iSDHC 20XX flashkártya egyforma. A 2013-as modellek nem kompatibilisek. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: 2019. szeptember 3. | <= 11.14.0 | <= 1.4.5 | Az összes R4iSDHC 20XX flashkártya egyforma. A 2013-as modellek nem kompatibilisek. |
+| **Ace3DS X** | | nem | <= 11.14.0 | <= 1.4.5 | **ntrboot-tal gyárilag flashelve** (külső kapcsolóval váltogatható az ntrboot ("3DS") és az NDS mód); ne flasheld kézileg ntrboot-tal. |
+| **Ace3DS Plus** | | nem | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | nem | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | nem | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | nem | nincs | nincs | |
| **R4i Gold 3DS Deluxe "Starter"** | | nem | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | nem | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | ismeretlen | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: 2019. szeptember 3. | <= 11.14.0 | <= 1.4.5 | Az összes R4iSDHC 20XX flashkártya egyforma. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
@@ -49,7 +49,7 @@ Kipróbálhatod, hogy működik-e a mágnes úgy, hogy az (A), (B), (X), (Y) gom
Vedd figyelembe, hogy a flashkártya nem lesz használható az eredeti rendeltetése szerint addig, amíg az ntrboot exploit telepítve van rá. (Kivételt képez az Acekard 2i, ami működőképes marad *kizárólag NDS-eken, és azokon a 3DS-eken, melyekre egyedi firmware van telepítve*.) Ez azt jelenti, hogy a legtöbb flashkártya még csak a home menu-ben sem jelenik majd meg. Az ntrboot flashelési útmutatójának végén van néhány opcionális lépés arról, hogyan töröld azt a flashkártyádról, ha már végeztél.
-Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési folyamat során **brickelődjön** néhány hamisított flashkártya és végleg használhatatlanná váljon. Ez elég valószínűtlen, azonban éppen emiatt csak eredeti flashkártyákat támogatunk. To reduce the chance of receiving a counterfeit card, it is recommended that you use a reputable site to buy your flashcart (such as [NDS Card](http://www.nds-card.com/))
+Vedd figyelembe, hogy néhány ritka esetben lehetséges, hogy a flashelési folyamat során **brickelődjön** néhány hamisított flashkártya és végleg használhatatlanná váljon. Ez elég valószínűtlen, azonban éppen emiatt csak eredeti flashkártyákat támogatunk. Hogy csökkentsd a kockázatát a hamisított kártya megvásárlásának, javasoljuk, hogy egy megbízható oldalról vásárold azt (mint például az [NDS Card](http://www.nds-card.com/))
{: .notice--danger}
___
diff --git a/_pages/hu_HU/privacy-policy.txt b/_pages/hu_HU/privacy-policy.txt
index c36506539b..0bd424e54c 100644
--- a/_pages/hu_HU/privacy-policy.txt
+++ b/_pages/hu_HU/privacy-policy.txt
@@ -1,30 +1,30 @@
---
-title: "Privacy Policy" #
+title: "Adatvédelmi szabályzat" #
layout: single-no-ads
---
-### Cookies
+### Sütik
-This site utilizes cookies in order to facilitate routing users through the guide instructions. Cookies allow for the sidebar of the page to display current progress through the site to help users navigate the instructions more easily.
+Ez a webhely cookie-kat használ annak érdekében, hogy irányíthassa a felhasználókat az útmutatóban haladás során. A sütik lehetővé teszik, hogy az oldal oldalsávja megjelenítse az aktuális haladást a webhelyen, ezáltal a felhasználók könnyebben eligazodhassanak az utasításokban.
-### Embedded Content From Other Websites
+### Beágyazott tartalom más oldalakról
-This site may include embedded content (e.g. videos, images, articles, etc.). Embedded content from other websites behaves as if the user has visited the other website.
+Ez az oldal beágyazhat tartalmat más oldalakról (például videókat, képeket, cikkeket, stb.). A más weboldalakról beágyazott tartalom úgy viselkedik, mintha a felhasználó meglátogatta volna az oldalt.
-These websites may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with that embedded content, including tracking your interaction with the embedded content if you have an account and are logged in to that website.
+Ezek a webhelyek adatokat gyűjthetnek rólad, használhatnak cookie-kat, beágyazhatnak további harmadik felek általi nyomon követést és nyomon követhetik ezzel a beágyazott tartalommal való interakciót, beleértve a beágyazott tartalommal való interakció nyomon követését akkor is, ha van fiókja és be van jelentkezve az adott webhelyre.
-### Analytics
+### Analitika
-This site uses Google Analytics to monitor and analyze traffic. This site is hosted by Github Pages, which may collect data about you, use cookies, embed additional third-party tracking, and monitor your interaction with this site. For more information about Github Pages as it relates to user privacy, see the [GitHub Privacy Statement](https://help.github.com/en/articles/github-privacy-statement).
+Ez a webhely a Google Analytics segítségével figyeli és elemzi a forgalmat. Ezt a weboldalt a Github Pages üzemelteti, amely adatokat gyűjthet rólad, használhat sütiket, beágyazhat további harmadik felek nyomon követését, és figyelemmel kísérheti a webhelykel való interakciót. A felhasználói adatvédelemmel kapcsolatos Github oldalakról a [GitHub adatvédelmi nyilatkozat] (https://help. github. com/en/articles/github-privacy-statement) oldalon talál további információt.
-### Information Collected
+### Gyűjtött információk
-This site does not collect personal information. This site may collect usage information in order to analyze interest in content and to provide advertisers with information on an aggregate basis. No personally identifiable information is shared with third-party advertising companies.
+Ez a webhely nem gyűjt személyes adatokat. Ez a webhely felhasználási információkat gyűjthet a tartalom iránti érdeklődés elemzése és a hirdetők összesített tájékoztatása érdekében. Személyazonosításra alkalmas információ nem kerül megosztásra harmadik fél reklámcéggel.
-### Third-Party Websites
+### Harmadik fél weboldalak
-This site may link to other sites for users to use or reference. This site is not responsible for the privacy policies of other sites. Users should be aware that the privacy policies of other websites may differ from this one.
+Ez a webhely más webhelyekre is hivatkozhat, amelyeket a felhasználók használhatnak vagy hivatkozhatnak. Ez a webhely nem felelős más webhelyek adatvédelmi irányelveiért. A felhasználóknak tisztában kell lenniük azzal, hogy más webhelyek adatvédelmi irányelvei eltérhetnek ettől.
-### Changes to Privacy Policy
+### Változások az Adatvédelmi szabályzatban
-The contents of this Privacy Policy may be altered at any time and for any reason.
+Ennek az Adatvédelmi szabályzatnak a tartalma bármikor, bármilyen okból megváltozhat.
diff --git a/_pages/hu_HU/region-changing.txt b/_pages/hu_HU/region-changing.txt
index 82ab94764e..ce03ad6584 100644
--- a/_pages/hu_HU/region-changing.txt
+++ b/_pages/hu_HU/region-changing.txt
@@ -8,7 +8,7 @@ title: "Régióváltás"
Ez egy kiegészítő rész, amelyben régióváltást végzünk a CFW SysNAND-on. Ezt úgy hajtjuk végre, hogy telepítünk egy olyan 11.5.0-s CTRTransfer képfájlt, ami az általad kívánt régiójú.
-Note that region changing is almost completely unnecessary since Luma3DS supports out-of-region games and individual title [Locale Emulation](https://github.com/AuroraWright/Luma3DS/wiki/Optional-features). Additionally, running NDS games with alternative out-of-region languages is supported by [TWiLightMenu++](https://github.com/DS-Homebrew/TWiLightMenu/releases).
+Fontos, hogy tudd, hogy a régióváltás majdnem teljesen felesleges, mivel a Luma3DS támogatja a régiódon kívüli játékokat, illetve a játékonkénti [lokalizáció emulációt](https://github.com/AuroraWright/Luma3DS/wiki/Optional-features) is. Ezen felül, NDS játékok futtatása más, régión kívüli nyelveken is támogatott [TWiLightMenu++](https://github.com/DS-Homebrew/TWiLightMenu/releases) segítségével.
Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) linkeket ezen az oldalon, szükséged lesz egy torrent kliensre, mint például a [Deluge](http://dev.deluge-torrent.org/wiki/Download).
@@ -29,7 +29,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS
### Amire szükséged lesz
-* A [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) legújabb kiadása
+* A [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) v1.9.2pre1 kiadása
* Az [FBI](https://github.com/Steveice10/FBI/releases/latest) legújabb kiadása *(a`.3dsx` fájl)*
* A készülékedhez és a választott régióhoz tartozó 11.5.0-s CTRTransfer képfájl:
+ - [New 3DS vagy 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
@@ -41,7 +41,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS
+ - [Old 3DS vagy 2DS - 11.5.0 - JPN - CTRTransfer](magnet:?xt=urn:btih:d8913b4c0da224e8852fa2f685c41ddbce5310bc&dn=11.5.0-38J_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
+ - [Old 3DS vagy 2DS - 11.5.0 - USA - CTRTransfer](magnet:?xt=urn:btih:2708089605ca47387fa64e996a699eedd18031e8&dn=11.5.0-38U_ctrtransfer_o3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
-### Utasítások
+### Lépések
#### Első rész - Előkészületek
@@ -55,7 +55,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS
1. Másold az `FBI.3dsx` fájlt az SD kártyád `/3ds/` mappájába
1. Tedd vissza az SD kártyád a készülékedbe
-#### Második rész - CTRTransfer
+#### II. rész - CTRTransfer
1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben
1. Ha rákérdez arra, hogy csináljon-e egy biztonsági másolatot (essential files backup), akkor nyomd meg az (A) gombot, hogy csináljon, majd amikor végzett, nyomd meg ismét az (A) gombot a folytatáshoz
@@ -87,7 +87,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS
+ B9S és Luma használatakor (mint esetedben) biztonságosak a rendszerfrissítések
+ Ha ez hibát ad, akkor állítsd a DNS beállításodat "auto"-ra
-#### Harmadik rész - FBI elindítása
+#### III. rész - FBI elindítása
1. Indítsd el a Download Play alkalmazást (ez az [ikon]({{ "/images/download-play-icon.png" | absolute_url }})
1. Nyomd meg az (L) + (Le) + (Select) gombokat egyszerre, hogy kinyíljon a Rosalina menü
@@ -100,7 +100,7 @@ Az alábbiak használatához már telepítened kellett a következőket: Luma3DS
1. Indítsd el a Download Play alkalmazást
1. A készülékednek ezek után be kell töltenie a Homebrew Launchert
-#### Negyedik rész - Ticketek újratelepítése
+#### IV. rész - Ticketek újratelepítése
Ha a szkript nem talált egy ticketet sem, és azt írta, hogy hagyd ki ezt a rész, akkor hagyd is ki
{: .notice--info}
@@ -120,7 +120,7 @@ Ha a szkript nem talált egy ticketet sem, és azt írta, hogy hagyd ki ezt a r
+ Nyomd meg a (B) gombot, hogy elutasítsd a ticketek CDN-ről történő telepítését.
1. Nyomd meg a (Home) gombot az FBI-ból való kilépéshez
-#### Ötödik rész - Régió beállítások
+#### V. rész - Régió beállítások
1. Indítsd el a System Settings-et
1. Válaszd az "Other Settings", majd a "Profile", végül a "Region Settings" opciót
diff --git a/_pages/hu_HU/seedminer.txt b/_pages/hu_HU/seedminer.txt
index 9411f6a322..32c7316a0e 100644
--- a/_pages/hu_HU/seedminer.txt
+++ b/_pages/hu_HU/seedminer.txt
@@ -6,88 +6,75 @@ title: "Seedminer"
### Fontos tudnivalók
-To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications.
+Ahhoz, hogy telepítsük a boot9strap-et a készülékedre, egy, a "DSiWare" alkalmazásokra vonatkozó biztonsági megkötés hibáját fogjuk kihasználni.
-To accomplish this, we use a tool called Seedminer to calculate the DSiWare encryption key (`movable.sed`) for your device. We then use this DSiWare encryption key to decrypt a compatible DSiWare application and inject an exploit into it to run our own code (the exact exploit used will depend on your device's region).
+Ennek eléréséhez egy Seedminer nevű eszközt fogunk használni, hogy kiszámítsuk a készüléked DSiWare titkosítási kulcsát (`movable.sed`). Ezután ezt a DSiWare titkosítási kulcsot használjuk egy kompatibilis DSiWare alkalmazás visszafejtésére, és kihasználjuk azt a saját kódunk futtatásához (a pontos kihasználás az eszköz régiójától függ).
-If this key were completely random, the encryption key would be impossible to break on current computing hardware. Fortunately, the first half of the key (`movable_part1.sed`) is actually mathematically related to your device's Friend Code, allowing us to break the encryption. For information on how Seedminer works, please see [this presentation](https://zoogie.github.io/web/34⅕c3).
+Ha ez a kulcs teljesen véletlenszerű lenne, a titkosítási kulcsot lehetetlen lenne feltörni a jelenleg elérhető hardverekkel. Szerencsére a kulcs első fele (`movable_part1.sed`) matematikailag összefüggésben van a készüléked Friend Code-jával, ami lehetővé teszi a titkosítás feltörését. További információért arról, hogyan működik a Seedminer, nézd meg [ezt a prezentációt](https://zoogie.github.io/web/34⅕c3).
-This method uses a powerful graphics card to perform the calculations needed. A volunteer-run website is used for the purpose of assisting you with this method.
+Ez a módszer egy erős grafikus kártyát használ a szükséges számítások elvégzéséhez. Egy önkéntes által üzemeltetett webhely segít neked ebben a módszerben.
-### Utasítások
+### Lépések
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### I. rész - Előkészületek
1. Helyezd az SD kártyád a számítógépbe
-1. Navigate to the `Nintendo 3DS` folder on your SD card
-1. Copy the 32 character long name of the folder you see inside Nintendo 3DS
- + Do not go inside any more folders
- + If you see multiple folders with long, random names inside `Nintendo 3DS` without opening any other folders, perform the following:
- + Rename the `Nintendo 3DS` folder to `BACKUP_Nintendo 3DS`
- + Reinsert your SD card into your device and power on your device
- + Wait for the device to generate the SD card data
- + Power off your device and reinsert your SD card into your computer
- + Navigate to the `Nintendo 3DS` folder on your SD card
- + Copy the 32 character long name of the folder you see
- + Delete the `Nintendo 3DS` folder
- + Rename the `BACKUP_Nintendo 3DS` folder to `Nintendo 3DS`
-1. Paste your 32 character long folder name into a document you can reference later
- + This folder name is also known as your "ID0"
+1. Lépj be az SD kártyád `Nintendo 3DS` könyvtárába
+1. Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz
+ + Nem menj beljebb több mappát
+ + Ha több mappát látsz véletlen nevekkel a `Nintendo 3DS` könytárban, bármilyen mappa megnyitása nélkül tedd a következőt:
+ + Nevezd át a `Nintendo 3DS` mappát `BACKUP_Nintendo 3DS` névre
+ + Tedd vissza az SD kártyát a készülékedbe, és kapcsold be
+ + Várd meg, amíg a készüléked legenerálja az SD kártyára az adatokat
+ + Kapcsold ki a készülékedet, és helyezd vissza az SD kártyádat a számítógépedbe
+ + Lépj be az SD kártyád `Nintendo 3DS` könyvtárába
+ + Másold le a 32 karakter hosszú nevét annak a mappának, amit látsz
+ + Töröld a `Nintendo 3DS` mappát
+ + Nevezd át a `BACKUP_Nintendo 3DS` mappát `Nintendo 3DS` névre
+1. Illeszd be a 32 karakter hosszú mappanevet egy tetszőleges fájlba, amit később elérsz
+ + Ez a mappa "ID0" néven is ismert
1. Kapcsold be a készülékedet
1. Válaszd a Friend List opciót (a [narancsszínű fej ikon]({{ "/images/friend-list-icon.png" | absolute_url }}) a Home Menu felső sávján)
- + If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Find your Mii profile, then find the "Friend Code" field on the top screen
+ + Ha hibaüzenetet kapsz, és visszadob a menübe, vagy új Mii-t kell csinálnod, vagy a konzolod nem tud csatlakozni a Nintendo szervereihez (kitiltás, vagy kapcsolódási hiba miatt)
+1. Keresd meg a Mii profilodat, ott találod a "Friend Code" mezőt a felső képernyőn
-#### Section III - Seedminer
+#### II. rész - Seedminer
-1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
- + This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
-1. Paste your device's 32 character long folder name into the "Your ID0" field
- + Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
-1. Select "Go"
- + If the site immediately goes to step 4, download your `movable.sed` file and continue with the next section.
-1. When prompted, use the "Register Friend" button on your device to add the friend code of the bot 3DS console
-1. Wait for the site to update
- + If it does not, wait a few minutes before refreshing the page once
-1. Once the site processes your information, you will be given the option to "Continue" or "Do another device". Click the green "Continue" button
-1. Wait for the remainder of the process to complete
- + This is usually fast (1-5 minutes) but in some cases, can take up to half an hour.
- + During this process, the bot you added may not show up on your 3ds. As long as the website updates, this is not an issue.
- + If you are still waiting after half an hour, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. When the process has completed, download your `movable.sed` file from the site
- + Keep this file as you will need it in the upcoming pages
+1. Nyisd meg a [Bruteforce Movable](https://seedminer.hacks.guide/) oldalt a számítógépeden
+ + Ez az oldal képes automatizálni a `movable_part1.sed` előállítását (egy bot 3DS konzol segítségével), illetve a készüléked DSiWare titkosításának feltörését (egy önkéntes számítógépén futtatva a Seedminer-t)
+ + Ha az oldal nem működik, próbáld meg [ezt](https://bfm.nintendohomebrew.com/)
+ + Ha ha egyik oldal sem működik, csatlakozz a [Nintendo Homebrew Discord-on](https://discord.gg/MWxPgEp) csatornához, és kérj segítséget (angol nyelven) valakitől
+1. Írd be a készüléked Friend Code-ját (szóközök és kötőjelek nélkül) a "Your friend code" mezőbe
+1. Illeszd be a készüléked 32 karakter hosszú mappanevét a "Your ID0" mezőbe
+ + Ne próbáld meg kézzel beadni az ID0 kódot. Legyél biztos abban, hogy az ID0 helyes, azzal, hogy másolod és beilleszted onnan, ahova az előző részben elmentetted
+1. Nyomd meg a "Go"-t
+ + Ha az oldal azonnal a 4. lépésre ugrik, töltsd le a `movable.sed` fájlt és folytassa a következő szakasszal.
+1. Ha kéri, használd a "Register Friend" gombot a készülékeden és add hozzá a bot 3DS konzol Friend Code-ját
+1. Várj, amíg az oldal frissül
+ + Ha nem így történik, várj néhány percet, mielőtt frissíted az oldalt még egyszer
+1. Ha az oldal feldolgozta az információt, lehetőséged van a folytatásra ("Continue") vagy másik eszközre végrehajtásra ("Do another device"). Kattints az zöld "Continue" gombra
+1. Várj az értesítőre a folyamat befejezéséről
+ + Ez általában gyors (1-5 perc) de néhány esetben fél óra is lehet.
+ + Ez alatt a folyamat alatt, a bot, amit hozzáadtál nem biztos, hogy feltűnik a 3ds-eden. Egészen addig, amíg a weboldal frissít, ez nem probléma.
+ + Ha egy fél óra után is még mindig várakozol, csatlakozz a [Nintendo Homebrew Discord-on](https://discord.gg/MWxPgEp) csatornához, és kérj segítséget (angol nyelven) valakitől
+1. Amikor a folyamat befejeződött, töltsd le a `movable.sed` fájlodat az oldalról
+ + Őrizd meg ezt fájlt, mert szükséged lesz rá a következő oldalkon
___
#### Seedminer + unSAFE_MODE
-This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
+Ez a módszer a Seedminer további kiaknázására használja a `movable.sed` fájlt, hogy kihasználja a SAFE_MODE firmware összes 3DS egységen meglévő exploitjának kihasználását.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+Ez a metódus kompatibilis minden régióval, kivéve CHN és TWN.
-Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
+Tovább a [Boot9strap telepítésére (USM)](installing-boot9strap-(usm))
{: .notice--primary}
___
-#### Legacy Methods
+#### Legacy metódusok
-These methods are outdated and not recommended unless otherwise indicated.
+Ezek a metódusok régiek és nem ajánlottak, ha nincsen külön jelezve.
-[Legacy Methods](legacy-methods)
+[Legacy metódusok](legacy-methods)
diff --git a/_pages/hu_HU/site-navigation.txt b/_pages/hu_HU/site-navigation.txt
index 7b9d657df5..e82b1aab88 100644
--- a/_pages/hu_HU/site-navigation.txt
+++ b/_pages/hu_HU/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Telepítés véglegesítése](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -40,21 +40,22 @@ sitemap: false
+ [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx))
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax))
-+ [boot9strap telepítése (2xrsa)](installing-boot9strap-(2xrsa))
-+ [boot9strap telepítése (böngésző)](installing-boot9strap-(browser))
-+ [Installing boot9strap (Fredtool)](installing-boot9strap-(fredtool))
-+ [Installing boot9strap (Frogtool)](installing-boot9strap-(frogtool))
-+ [boot9strap telepítése (Hardmod)](installing-boot9strap-(hardmod))
-+ [boot9strap telepítése (MSET)](installing-boot9strap-(mset))
-+ [boot9strap telepítése (ntrboot)](installing-boot9strap-(ntrboot))
-+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
-+ [boot9strap telepítése (Soundhax)](installing-boot9strap-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Boot9strap telepítése (2xrsa)](installing-boot9strap-(2xrsa))
++ [Boot9strap telepítése (böngésző)](installing-boot9strap-(browser))
++ [Boot9strap telepítése (Fredtool)](installing-boot9strap-(fredtool))
++ [Boot9strap telepítése (Frogtool)](installing-boot9strap-(frogtool))
++ [Boot9strap telepítése (Hardmod)](installing-boot9strap-(hardmod))
++ [Boot9strap telepítése (MSET)](installing-boot9strap-(mset))
++ [Boot9strap telepítése (ntrboot)](installing-boot9strap-(ntrboot))
++ [Boot9strap telepítése (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
++ [Boot9strap telepítése (Soundhax)](installing-boot9strap-(soundhax))
++ [Boot9strap telepítése (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Boot9strap telepítése (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [EmuNAND költöztetése](move-emunand)
+ [ntrboot](ntrboot)
+ [Régióváltás](region-changing)
+ [Seedminer](seedminer)
-+ [Legacy Seedminer Methods](legacy-methods)
++ [Legacy Seedminer metódusok](legacy-methods)
+ [Hibaelhárítás](troubleshooting)
+ [CFW eltávolítása](uninstall-cfw)
+ [B9S frissítése](updating-b9s)
diff --git a/_pages/hu_HU/troubleshooting.txt b/_pages/hu_HU/troubleshooting.txt
index d5f154013e..acd03c32de 100644
--- a/_pages/hu_HU/troubleshooting.txt
+++ b/_pages/hu_HU/troubleshooting.txt
@@ -18,27 +18,27 @@ Ahhoz, hogy használhasd a [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme
### Amire szükséged lesz
-* The latest release of [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) *(the .3dsx file)*
+* A [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) legújabb kiadása *(a .3dsx fájl)*
-### Utasítások
+### Lépések
#### Első rész - Előkészületek
1. Kapcsold ki a készüléked
1. Helyezd az SD kártyád a számítógépbe
1. Hozz létre egy mappát `3ds` néven az SD kártyád gyökerében, ha még nem létezik ilyen
-1. Copy `TWLFix-CFW.3dsx` to the `/3ds/` folder on your SD card
+1. Másold az `TWLFix-CFW.3dsx` fájlt az SD kártyád `/3ds/` mappájába
1. Tedd vissza az SD kártyád a készülékedbe
-#### Section II - Fixing TWL
+#### II. rész - A TWL javítása
-1. Open the Homebrew Launcher
-1. Launch TWLFix-CFW from the list of homebrew
-1. Press (A) to uninstall the broken TWL titles
-1. Press (Start) to reboot the device
-1. Perform a System Update by going to System Settings, then "Other Settings", then going all the way to the right and using "System Update"
- + The update will see that the essential TWL titles have been uninstalled, and will redownload and reinstall them
-1. Once the update is complete, tap "OK" to reboot the device
+1. Nyisd meg a Homebrew Lancher-t
+1. Indítsd el a TWLFix-CFW-t a homebrew listából
+1. Nyomj (A)-t a törött TWL címek eltávolításához
+1. Nyomj (Start) gombot az eszköz újraindításához
+1. Frissítsd az eszközödet következőképp. Lépj be a System Settings-be, majd az "Other settings"-be, ahol addig lépkedj jobbra, amíg a végére nem érsz. Itt válaszd a "System Update" opciót
+ + A frissítés észreveszi, hogy lényeges TWL címek kerültek eltávolításra és le fogja tölteni és újratelepíteni azokat
+1. Ha a frissítés kész, érintsd meg az "OK"-ot az eszköz újraindításához
## Nem lehet injektálni H&S-be Gateway segítségével downgrade-elt készüléken
@@ -153,5 +153,5 @@ A böngésző alapú exploitok (mint például a browserhax, vagy az 2xrsa) gyak
## Kék képernyő bootoláskor (bootrom hiba)
1. A készüléked brickelve lett
-1. You will need to get an ntrboot-comptible flashcart (one of the ones on [this list](ntrboot) or a [hardmod](https://gbatemp.net/threads/414498/), or repair / replace your device
+1. Szükséged van arra, hogy beszerezz egy ntrboot-kompatibilis flashcart-ot (egyike az [ezen a listán](ntrboot) vagy találhatóknak [hardmod](https://gbatemp.net/threads/414498/) vagy javítsd/kicseréld eszközöd
1. Segítségért (angol nyelven), fordulj ide: [Nintendo Homebrew a Discord-on](https://discord.gg/MWxPgEp)
diff --git a/_pages/hu_HU/uninstall-cfw.txt b/_pages/hu_HU/uninstall-cfw.txt
index 5095cc8e8e..906a14bc90 100644
--- a/_pages/hu_HU/uninstall-cfw.txt
+++ b/_pages/hu_HU/uninstall-cfw.txt
@@ -11,7 +11,7 @@ A következőkben teljes egészében el fogjuk távolítani a CFW-t a készülé
Ez az esetek többségében nem old meg semmilyen olyan problémát, ami a CFW telepítése közben felmerülhet. Javasolt inkább elolvasnod a [Hibaelhárítás](troubleshooting) oldalt, vagy segítséget kérni (angol nyelven) itt: [Nintendo Homebrew a Discord-on](https://discord.gg/MWxPgEp).
{: .notice--danger}
-Any unsigned (illegitimate) games will be rendered unusable and should be manually removed before starting this process by using the Data Management section of the System Settings. Használj [mentéskezelőt](https://github.com/FlagBrew/Checkpoint/releases/latest), hogy biztonsági másolatot készíts azon (nem eredeti) játékok mentéséről, amik fontosak a számodra.
+Minden aláíratlan (illegitim) játék használhatatlanná válik és kézzel eltávolítandó a folyamat előtt a System settings Data Management szekciójában. Használj [mentéskezelőt](https://github.com/FlagBrew/Checkpoint/releases/latest), hogy biztonsági másolatot készíts azon (nem eredeti) játékok mentéséről, amik fontosak a számodra.
Ez az eljárás nem fogja befolyásolni sem az NNID-det, sem az eredeti játékaidat, sem bármilyen mentést, ami az eredeti, megvásárolt játékaidhoz tartozik.
@@ -22,11 +22,11 @@ Vedd figyelembe, hogy amennyiben van más payload fájl a `GodMode9.firm` fájlo
### Amire szükséged lesz
-* A [GodMode9](https://github.com/d0k3/GodMode9/releases/latest) legújabb kiadása
+* A [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1) v1.9.2pre1 kiadása
-### Utasítások
+### Lépések
-#### Section I - Safety Test
+#### I. rész - Biztonsági teszt
1. Kapcsold ki a készüléked
1. Helyezd az SD kártyád a számítógépbe
@@ -37,33 +37,33 @@ Vedd figyelembe, hogy amennyiben van más payload fájl a `GodMode9.firm` fájlo
1. Ha rákérdez arra, hogy csináljon-e egy biztonsági másolatot (essential files backup), akkor nyomd meg az (A) gombot, hogy csináljon, majd amikor végzett, nyomd meg ismét az (A) gombot a folytatáshoz
1. Ha rákérdez arra, hogy szeretnéd-e a valós dátumot és időt javítani (fix the RTC date&time), nyomd meg az (A) gombot, állítsd be a helyes dátumot és időt, majd nyomd meg az (A) gombot a folytatáshoz
+ Ne feledd, hogy amennyiben ezen a ponton szükséges volt a helyes dátum és idő beállítása, a System Settingsben is be kell majd állítanod a helyes időt az útmutató végén
-1. Navigate to `[1:] SYSNAND CTRNAND > title > 00040138 > (X)0000002 > content`
- + On a "New" edition console, the (X) will instead be 2
- + On an "Old" edition console, the (X) will instead be 0
-1. Select the `.app` file
-1. Select `NCCH Image Options`
-1. Select `Mount image to drive`
-1. In the window that appears, open the `exefs` folder
-1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
-1. When prompted, choose to decrypt and make a copy
-1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
- + If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+1. Navigáljt az `[1:] SYSNAND CTRNAND > title > 00040138 > (X)0000002 > content` útvonalra
+ + Egy "New" verziós konzolon, az (X) helyén 2 áll
+ + Egy Old" verziós konzolon, az (X) helyén 0 áll
+1. Válaszd ki az `.app` fájt
+1. Válaszd az `NCCH image options`-t
+1. Válaszd a `Mount image to drive` opciót
+1. A megjelenő ablakban, válaszd az `exefs` mappát
+1. Ebben a mappában válaszd a `.firm` fájlt
+1. Válaszd az `FIRM image options`-t
+1. Válaszd a "Boot FIRM"-et
+1. Amikor a rendszer kéri, válaszd a dekriptálást és másolat készítését
+1. Be kell bootolnod a normál 3DS Home menübe. Ha így történt, akkor kapcsold ki az eszközt és folytasd a következő résznél
+ + Ha NEM bootolsz a normál 3DS Home menübe, az útmutató folytatása brickelni **FOGJA** az eszközödet. Csatlakozz a [Nintendo Homebrew Discord-on](https://discord.gg/MWxPgEp) csatornához, és kérj segítséget (angol nyelven) valakitől
-#### Section II - Prep Work
+#### II. rész - Előkészületek
1. Kapcsold be a készülékedet
-1. Navigate to System Settings > Data Management > Nintendo 3DS > Software
-1. In this list of software, delete any non-Nintendo content you installed while using CFW
- + This includes common system software such as FBI, Anemone3DS, Luma Updater, Homebrew Launcher, Checkpoint, and others, along with any non-eShop games
-1. Navigate to Data Management > DSiWare
-1. In this list of software, delete any non-Nintendo content you installed while using CFW
- + This includes software such as TWiLightMenu++, along with any non-eShop games
- + Failure to remove all CFW software from both the 3DS and DSiWare sections before uninstalling CFW may prevent or disable access to the Data Management menu after uninstalling CFW
+1. Navigálj el a System Settings > Data Management > Nintendo 3DS > Software menüponthoz
+1. Ebben a szoftver listában törölj minden nem-Nintendo tartalmat, amit telepítettél a CFW használatával
+ + Ebbe bele tartoznak az általános rendszer szoftverek, mint az FBI, Anemone3DS, Luma Updater, Homebrew Launcher, Checkpoint és egyebek beleértve a non-eShop játékokat is
+1. Navigálj ide: Data Management -> DSiWare
+1. Ebben a szoftver listában törölj minden nem-Nintendo tartalmat, amit telepítettél a CFW használatával
+ + Ebbe bele tartoznak olyan szoftverek, mint az TWiLightMenu++ beleértve a non-eShop játékokat is
+ + A sikertelen eltávolítása minden CFW szoftvernek a 3DS és a DSiWare szekciókban a CFW eltávolítása előtt megakadályozhatja vagy letilthatja a hozzáférést a Data Management menühöz a CFW eltávolítása után
1. Kapcsold ki a készüléked
-#### Section III - Running Uninstall Script
+#### III. rész - Az eltávolító szkript futtatása
1. Indítsd el a GodMode9-et a (Start) lenyomva tartásával boot közben
1. Nyomd meg a (Home) gombot, hogy megjelenjen a műveleti menü
diff --git a/_pages/hu_HU/updating-b9s.txt b/_pages/hu_HU/updating-b9s.txt
index f9ccd20d8f..19aefd4e22 100644
--- a/_pages/hu_HU/updating-b9s.txt
+++ b/_pages/hu_HU/updating-b9s.txt
@@ -28,12 +28,12 @@ Kaptunk visszajelzéseket kitiltási hullámokról, melyeket a Nintendo a CFW-t
* A [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest) legújabb kiadása
* A [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) legújabb kiadása *(a sima boot9strap; nem a `devkit` fájl, nem az `ntr` fájl)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* A [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) legújabb kiadása
* A [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest) legújabb kiadása
-### Utasítások
+### Lépések
-#### Első rész - Előkészületek
+#### I. rész - Előkészületek
A most következő lépésekben mindig írd felül az SD kártyán található fájlokat, ha már létezne bármelyik.
{: .notice--info}
@@ -45,7 +45,7 @@ A most következő lépésekben mindig írd felül az SD kártyán található f
1. Másold át a `SafeB9SInstaller.firm` fájlt a SafeB9SInstaller `.zip`-ből az SD kártyád `/luma/payloads/` mappájába
1. Tedd vissza az SD kártyád a készülékedbe
-#### Második rész - boot9strap telepítése
+#### II. rész - boot9strap telepítése
1. Indítsd el a Luma3DS chainloader menüt a (Start) gomb lenyomva tartásával boot közben
1. Indítsd el a SafeB9SInstaller programot az (A) gomb lenyomásával
@@ -54,15 +54,15 @@ A most következő lépésekben mindig írd felül az SD kártyán található f
1. Ha ez elkészült, nyomd le a (Start)-ot, és az (A)-t, hogy újraindítsd a készülékedet, és a Luma3DS chainloader-be juss
+ Ha az `argc = 0` hibával találkozol a készüléked bootolása közben a B9S frissítése után, csak menj tovább, hogy kijavítsd
-#### Harmadik rész - Luma3DS frissítése
+#### III. rész - Luma3DS frissítése
1. Kapcsold ki a készüléked
1. Helyezd az SD kártyád a számítógépbe
-1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing the existing file
+1. Másold át a `boot.firm` fájlt a Luma3DS `.zip`-ből az SD kártyád gyökerébe, és cseréld le a már meglévő fájlt
1. Tedd vissza az SD kártyád a készülékedbe
1. Kapcsold be a készülékedet
-#### Negyedik rész - Luma3DS konfigurálása
+#### IV. rész - Luma3DS konfigurálása
Ez a szakasz csak akkor kell, ha előjön a Luma3DS konfigurációs menü újraindítás után.
{: .notice--info}
diff --git a/_pages/id_ID/ctrtransfer.txt b/_pages/id_ID/ctrtransfer.txt
index d099002134..cf2c059aad 100644
--- a/_pages/id_ID/ctrtransfer.txt
+++ b/_pages/id_ID/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(if your device is not from one of these regions, just pick one that matches your device type)*:
diff --git a/_pages/id_ID/finalizing-setup.txt b/_pages/id_ID/finalizing-setup.txt
index fe3d1c1bbb..90f49a797f 100644
--- a/_pages/id_ID/finalizing-setup.txt
+++ b/_pages/id_ID/finalizing-setup.txt
@@ -26,7 +26,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/id_ID/get-started.txt b/_pages/id_ID/get-started.txt
index 0462e2a9f0..7593529e50 100644
--- a/_pages/id_ID/get-started.txt
+++ b/_pages/id_ID/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Before starting, you may want to check your SD card for errors using [H2testw (W
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| From |
To |
- No Browser |
- Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/id_ID/godmode9-usage.txt b/_pages/id_ID/godmode9-usage.txt
index 5374cffab2..99014ce114 100644
--- a/_pages/id_ID/godmode9-usage.txt
+++ b/_pages/id_ID/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/id_ID/home.txt b/_pages/id_ID/home.txt
index 2d99705764..71e18aeec4 100644
--- a/_pages/id_ID/home.txt
+++ b/_pages/id_ID/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt b/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/id_ID/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/id_ID/installing-boot9strap-(hbl-usm).txt b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..62fd4bfa66
--- /dev/null
+++ b/_pages/id_ID/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/id_ID/installing-boot9strap-(usm).txt b/_pages/id_ID/installing-boot9strap-(usm).txt
index 34bcad613f..079b370df0 100644
--- a/_pages/id_ID/installing-boot9strap-(usm).txt
+++ b/_pages/id_ID/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/id_ID/legacy-methods.txt b/_pages/id_ID/legacy-methods.txt
index f2ad998f35..4c5aa95012 100644
--- a/_pages/id_ID/legacy-methods.txt
+++ b/_pages/id_ID/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/id_ID/move-emunand.txt b/_pages/id_ID/move-emunand.txt
index 70d4477623..8d3b747918 100644
--- a/_pages/id_ID/move-emunand.txt
+++ b/_pages/id_ID/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/id_ID/ntrboot.txt b/_pages/id_ID/ntrboot.txt
index 76f128345f..a5f018c69a 100644
--- a/_pages/id_ID/ntrboot.txt
+++ b/_pages/id_ID/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/id_ID/region-changing.txt b/_pages/id_ID/region-changing.txt
index 86cff75300..75af6091cf 100644
--- a/_pages/id_ID/region-changing.txt
+++ b/_pages/id_ID/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/id_ID/seedminer.txt b/_pages/id_ID/seedminer.txt
index a0afe7196b..ff9a1fb4c3 100644
--- a/_pages/id_ID/seedminer.txt
+++ b/_pages/id_ID/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Insert your SD card into your computer
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/id_ID/site-navigation.txt b/_pages/id_ID/site-navigation.txt
index a878c9c847..9f7a473f8a 100644
--- a/_pages/id_ID/site-navigation.txt
+++ b/_pages/id_ID/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changing](region-changing)
diff --git a/_pages/id_ID/uninstall-cfw.txt b/_pages/id_ID/uninstall-cfw.txt
index 30e878bc92..bea4e7092a 100644
--- a/_pages/id_ID/uninstall-cfw.txt
+++ b/_pages/id_ID/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/it_IT/ctrtransfer.txt b/_pages/it_IT/ctrtransfer.txt
index 58a420e867..4d854b849a 100644
--- a/_pages/it_IT/ctrtransfer.txt
+++ b/_pages/it_IT/ctrtransfer.txt
@@ -17,7 +17,7 @@ DEVI aver già installato Luma3DS e boot9strap per poter proseguire.
### Cosa serve
-* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versione v1.9.2pre1 di [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* L'ultima versione di [FBI](https://github.com/Steveice10/FBI/releases/latest) *(il file `.3dsx`)*
* L'immagine CTRTransfer 11.5.0 relativa alla tua console e alla sua regione
*(se la tua console non rientra in nessuna di queste regioni, scegline una qualunque compatibile con la tua console)*:
diff --git a/_pages/it_IT/finalizing-setup.txt b/_pages/it_IT/finalizing-setup.txt
index 5de905c2c1..67e8287a51 100644
--- a/_pages/it_IT/finalizing-setup.txt
+++ b/_pages/it_IT/finalizing-setup.txt
@@ -26,7 +26,7 @@ Durante la guida verranno anche configurate le seguenti applicazioni:
* L'ultima versione di [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(il file `.cia`)*
* L'ultima versione di [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(il file `.cia`)*
* L'ultima versione di [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versione v1.9.2pre1 di [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* L'ultima versione di [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* L'ultima versione di [FBI](https://github.com/Steveice10/FBI/releases/latest) *(i file `.cia` e `.3dsx`)*
* Ultima versione di [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/it_IT/get-started.txt b/_pages/it_IT/get-started.txt
index c50b7b4971..3e82f794a3 100644
--- a/_pages/it_IT/get-started.txt
+++ b/_pages/it_IT/get-started.txt
@@ -8,10 +8,6 @@ title: "Cominciamo!"
Per proseguire, clicca sul collegamento corrispondente alla tua versione di sistema dalla tabella sottostante. I campi "da" e "a" sono inclusivi. Questo vuol dire che, per esempio, la riga "da 9.0.0 a 9.2.0" include 9.0.0, 9.1.0 e 9.2.0.
-Inoltre, ricorda che le ultime due colonne della tabella si riferiscono all'ultimo numero della tua versione (che corrisponde alla versione del browser installata nel sistema). Se la versione termina con -0 allora non hai un browser, mentre qualsiasi altro numero superiore a -0 indica che è installato un browser.
-
-Ad esempio, se dovessi avere la versione del software "5.0.0-0U", seguirai la colonna "Senza Browser" e la riga "da 5.0.0 a 5.1.0." perché la versione del software di sistema è inclusa in tale intervallo e non è presente un browser installato.
-
Puoi vedere quale versione del software possiedi selezionando le Impostazioni della console e guardando in basso a destra sullo schermo superiore.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Prima di iniziare è consigliabile verificare che la tua scheda SD sia priva di
{: .notice--warning}
{% capture notice-1 %}
-È stata segnalata recentemente un'ondata di ban da parte di Nintendo riscontrata da utenti con CFW. Per ridurre il rischio che capiti anche a te, esegui i seguenti passaggi prima di iniziare questa guida:
+Anche se riteniamo che l'uso di un custom firmware in questo momento sia relativamente sicuro, è importante tenere presente che non sarà mai al 100% senza rischio di ban.
-1. Entra nelle Impostazioni della Console, quindi in "Impostazioni Internet", poi "SpotPass" ed infine "Invio informazioni della console"
-1. Disabilita l'impostazione "Invio informazioni della console"
-1. Esci dalle Impostazioni della Console
-1. Accedi alla lista di amici (l'[icona con un viso arancione]({{ "/images/friend-list-icon.png" | absolute_url }}) nella riga superiore del menu HOME)
- + Se riscontri un errore e vieni rimandato al menu principale, o le impostazioni della lista di amici sono già state disattivate o la console non può connettersi ai server Nintendo (a causa di un ban o per problemi di connettività)
-1. Vai nelle impostazioni della lista di amici, quindi "Imposta notifiche amici" ed infine "Vuoi mostrare il software in uso?"
-1. Disabilita l'impostazione "Vuoi mostrare il software in uso?"
-1. Esci dalla lista di amici
+Dovresti evitare le seguenti azioni:
+1. Pirateria
+1. Trucchi online
+1. Comportamenti sospetti nell'eShop (ad esempio, contestazioni di addebiti con la carta di credito)
+
+Riteniamo che SpotPass e StreetPass siano tranquillamente utilizzabili in questo momento.
{% endcapture %}
@@ -60,38 +54,37 @@ Prima di iniziare è consigliabile verificare che la tua scheda SD sia priva di
| Da |
A |
- Senza Browser |
- Con Browser |
+ Azione |
| 1.0.0 |
2.0.0 |
- Aggiorna all'ultimo firmware o usa un metodo per "tutte le versioni" |
+ Aggiorna all'ultimo firmware o usa un metodo per "tutte le versioni" |
| 2.1.0 |
8.1.0 |
- Installazione di boot9strap (Soundhax) |
+ Installazione di boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Aggiorna all'ultimo firmware o usa un metodo per "tutte le versioni" |
+ 11.13.0 |
+ Aggiorna all'ultimo firmware o usa un metodo per "tutte le versioni" |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
TUTTE LE VERSIONI
|
- ntrboot
(Richiede una flashcart compatibile) or Installazione di boot9strap (Hardmod)
(Richiede fare saldature) |
+ ntrboot
(Richiede una flashcart compatibile) o Installazione di boot9strap (Hardmod)
(Richiede fare saldature) |
diff --git a/_pages/it_IT/godmode9-usage.txt b/_pages/it_IT/godmode9-usage.txt
index e9fc2ec057..dd23a02b45 100644
--- a/_pages/it_IT/godmode9-usage.txt
+++ b/_pages/it_IT/godmode9-usage.txt
@@ -22,7 +22,7 @@ Alcune delle istruzioni qui sotto riportate sono valide solo sull'ultima version
### Cosa serve
-* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versione v1.9.2pre1 di [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Istruzioni
diff --git a/_pages/it_IT/home.txt b/_pages/it_IT/home.txt
index 87710fb4b9..9e85604d38 100644
--- a/_pages/it_IT/home.txt
+++ b/_pages/it_IT/home.txt
@@ -81,8 +81,8 @@ Per una lista di tutte le firme di sighax, è possibile consultare [questo gist]
+ Questa guida è applicabile a New 3DS, Old 3DS, New 2DS e Old 2DS di ogni regione e con versione del software 11.13.0 o inferiore.
+ Seguendo correttamente la guida non perderai alcun dato e manterrai tutto ciò che era installato nella console (per cui giochi, NNID, salvataggi, ecc verranno tutti conservati).
+ Mantieni sempre la console in carica per evitare la perdita di dati o danni derivanti dall'improvviso spegnimento della console!
-+ La tua scheda SD dovrebbe essere [MBR e non GPT](http://www.howtogeek.com/245610/) (la scheda SD preconfezionata con la console è MBR di default).
-+ Se devi formattare una nuova scheda SD, puoi usare [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) e impostare Allocation Unit Size a 32K (32768).
++ La tua scheda SD dovrebbe essere [MBR e non GPT](http://www.howtogeek.com/245610/) (la scheda SD preconfezionata con la console è MBR di default). Il modo più semplice per verificarlo è controllare che la scheda SD funzioni nel tuo 3DS. Se funziona, la scheda SD è MBR.
++ Se devi formattare una scheda SD nuova, puoi usare [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) impostando Allocation Unit Size a 32K (32768).
+ A livello di software, un Old 2DS è essenzialmente identico a un Old 3DS, mentre un New 2DS è essenzialmente identico ad un New 3DS. Qualunque istruzione indicante "Old 3DS" si applica anche agli Old 2DS, e qualunque istruzione relativa ai "New 3DS" si applica ai New 2DS.
___
diff --git a/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt b/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..70d791a283
--- /dev/null
+++ b/_pages/it_IT/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Indice" %}
+
+### Lettura necessaria
+
+Questo metodo di accesso all'Homebrew Launcher si avvale di alcune sviste nel Browser Internet nativo del 3DS.
+
+Queste istruzioni funzionano su console americane, europee, giapponesi e coreane, indicate rispettivamente dalle lettere U, E, J o K dopo la versione del sistema operativo. Se hai una console di regione Taiwan o Cina, indicate dalle lettere T o C in fondo alla versione del sistema, [entra nel canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) e chiedi aiuto in inglese.
+
+### Cosa serve
+
+* L'ultima versione di [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* L'archivio dell'ultima versione di BrowserHax [[per Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [per New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old indica il modello della tua console. Se non sei sicuro di quale modello hai, consulta [questa immagine](https://3ds.eiphax.tech/pic/newold.png)
+* Una connessione WiFi attiva sulla tua console
+
+### Istruzioni
+
+#### Sezione I - Preparazione
+
+1. Spegni la tua console e rimuovi la scheda SD
+1. Inserisci la scheda SD nel tuo computer
+1. Copia il file `boot.3dsx` dai file scaricati dell'Homebrew Launcher nella directory principale della tua scheda SD
+ + La directory principale della scheda SD è la cartella della tua scheda SD in cui è possibile visualizzare la cartella Nintendo 3DS, ma non il suo interno
+1. Nell'archivio di BrowserHax, apri la cartella corrispondente alla regione della tua console
+ + La regione della tua console è indicata con la lettera finale della versione di sistema in Impostazioni della console: U è USA, E è EUROPA, J è GIAPPONE e K è COREA
+1. Copia la cartella `3ds` e i file `browserhax_hblauncher_ropbin_payload.bin` e `arm11code.bin` qui presenti nella directory principale della tua scheda SD
+ + Ora dovresti avere una cartella `Nintendo 3DS`, una cartella `3ds` e i due file `.bin` nella directory principale della scheda SD
+
+#### Sezione II - BrowserHax
+
+1. Apri [questa immagine](https://3ds.eiphax.tech/pic/hax.png) in una nuova scheda o finestra sul tuo computer
+1. Rimuovi in modo sicuro la scheda SD dal computer e reinseriscila nella console
+1. Accendi la tua console e assicurati che sia connessa a una rete WiFi attiva
+1. Dal menu HOME premi contemporaneamente i pulsanti L e R
+ + Dovrebbe avviarsi lo Scanner QR. In caso contrario, USM (la parte successiva per l'avvio del custom firmware) non potrà funzionare. Dovrai usare [Seedminer](seedminer)
+ + Se devi digitare l'URL, è `https://zoogie.github.io/web/nbhax/`
+1. Usa lo scanner QR per scansionare il codice QR aperto nel primo passo
+1. Tocca il pulsante "PROCEED TO HAXX"
+1. Attendi il termine del processo
+ + Se appare uno schermo giallo, spegni la console dopodiché ritenta questa sezione
+ + Se ottieni un errore, [segui questa guida per risolvere il problema](troubleshooting#a-browser-based-exploit-is-not-working)
+1. Se l'exploit ha avuto successo, la tua console avrà caricato l'Homebrew Launcher
+ + Se ricevi un errore che indica che non sono state trovate applicazioni, assicurati di aver copiato la cartella `3ds` dall'archivio di BrowserHax nella directory principale della tua scheda SD, quindi riprova questa sezione
+1. Lascia la console accesa e procedi alla sezione successiva indicata qui sotto
+
+
+___
+
+### Prosegui con l'[Installazione di boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/it_IT/installing-boot9strap-(hbl-usm).txt b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..c121e46e4a
--- /dev/null
+++ b/_pages/it_IT/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installazione di boot9strap (HBL-USM)"
+---
+
+{% include toc title="Indice" %}
+
+### Lettura necessaria
+
+Per sfruttare il firmware SAFE_MODE del nostro sistema, dobbiamo iniettare un profilo di connessione WiFi modificato.
+
+Poiché abbiamo già accesso agli Homebrew, possiamo approfittare di slotTool.
+
+Questo specifico metodo è destinato all'utilizzo con l'accesso all'Homebrew Launcher tramite [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+Se hai accesso all'Homebrew Launcher tramite un altro metodo, dovresti usare [Frogtool](installing-boot9strap-(frogtool)).
+
+Una volta inserito il profilo WiFi utilizzeremo SAFE_MODE, una funzionalità di ripristino presente su ogni console 3DS, per attivare il profilo WiFi modificato.
+
+Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Tradizionale](legacy-methods). In questi casi, puoi ricevere assistenza chiedendo, in inglese, nel canale [Nintendo Homebrew su Discord](https://discord.gg/MWxPgEp).
+{: .notice--danger}
+
+### Cosa serve
+
+* L'archivio dell'ultima versione di [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* L'archivio dell'ultima versione di [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Sezione I - Preparazione
+
+1. Dalla sezione precedente della guida, la console dovrebbe essere già accesa e visualizzare la schermata dell'Homebrew Launcher
+1. Avvia slotTool dalla lista degli homebrew disponibili
+ + Se rimani bloccato su una schermata rossa, spegni forzatamente la console tenendo premuto il pulsante di accensione per quindici secondi, quindi ritenta questa sezione
+1. Seleziona l'opzione "INSTALL exploit to wifi slots 1,2,3 & shutdown"
+ + Apparirà del testo su schermo dopodiché la console si spegnerà
+1. Rimuovi la scheda SD dalla console e connettila al computer
+1. Copia il file `boot.firm` dall'archivio `.zip` di Luma3DS nella directory principale della tua scheda SD
+1. Copia il file `usm.bin` dall'archivio `.zip` di unSAFE_MODE nella directory principale della tua scheda SD
+1. Reinserisci la scheda SD nella tua console
+
+#### Sezione II - unSAFE_MODE
+
+1. Con la console ancora spenta, tieni premuto i pulsanti (L) + (R) + (Su) + (A), dopodiché accendi la console
+ + Mantieni premuti i pulsanti finché la console non si avvia in Safe Mode
+1. Premi "OK" per accettare l'aggiornamento
+ + Non c'è alcun aggiornamento. Fa parte del procedimento
+1. Premi "Accetto" per accettare i termini e le condizioni
+1. L'aggiornamento fallirà, con codice di errore `003-1099`. Questo risultato è corretto
+1. Alla richiesta "Vuoi configurare le Impostazioni internet?", seleziona "Sì"
+1. Nel menu successivo, entra in `Connessione 1` -> `Modifica` -> pagina successiva (la freccia a destra) -> `Impostazioni proxy` -> `Impostazioni avanzate`
+ + Ecco una [rappresentazione visiva](https://uwuu.ca/images/safemode_highlighted.png)
+1. Quando vedi la scritta `B9S install SUCCESS` sullo schermo superiore, premi qualunque tasto per avviare la configurazione di Luma
+
+#### Sezione III - Configurare Luma3DS
+
+1. La tua console dovrebbe mostrare autonomamente il menu di configurazione di Luma
+1. Usa il pulsante (A) e il D-Pad per abilitare le seguenti opzioni:
+ + **"Show NAND or user string in System Settings"**
+1. Premi (Start) per salvare e riavviare il 3DS
+ + La console dovrebbe avviare il menu HOME dopo un po'. Se ottieni uno schermo nero per più di 5 minuti, [segui questa guida per risolvere il problema](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Sezione IV - Ripristino dei Profili di Connessione WiFi
+
+1. Avvia l'applicazione "Modalità download"
+1. Attendi finché non vedrai i due pulsanti
+ + Non premere alcun pulsante
+1. Premi simultaneamente i pulsanti (L) + (Giù) + (Select) per aprire il menu di Rosalina
+1. Seleziona "Miscellaneous options"
+1. Seleziona "Switch the hb. title to the current app."
+1. Premi (B) per continuare
+1. Premi (B) per tornare al menu principale di Rosalina
+1. Premi (B) per uscire dal menu di Rosalina
+1. Premi il pulsante HOME, quindi chiudi l'applicazione "Modalità download"
+1. Riavvia l'applicazione "Modalità download"
+1. La console dovrebbe ora avviare l'Homebrew Launcher
+1. Avvia slotTool dalla lista degli homebrew disponibili
+1. Seleziona "RESTORE original wifi slots 1,2,3"
+1. La console verrà riavviata
+
+___
+
+### Prosegui con il [Completamento dell'installazione](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/it_IT/installing-boot9strap-(usm).txt b/_pages/it_IT/installing-boot9strap-(usm).txt
index af48a0b556..1e26d78c3e 100644
--- a/_pages/it_IT/installing-boot9strap-(usm).txt
+++ b/_pages/it_IT/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ Se i tuoi pulsanti (L/R), (Su) o (A) non funzionano, dovrai usare un [Metodo Tra
#### Sezione I - Preparazione
1. Avvia [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) sul tuo computer
+ + Se questo sito non è raggiungibile, prova a usare [quest'altro](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Carica il tuo file movable.sed scegliendo l'opzione "Choose File"
1. Clicca su "Download unSAFE_MODE-bb3 archive"
+ Verrà scaricato un exploit DSiWare chiamato `F00D43D5.bin` e l'exploit di SAFE_MODE `usm.bin` all'interno di un archivio zip (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/it_IT/legacy-methods.txt b/_pages/it_IT/legacy-methods.txt
index a2d7386a01..db232ae58d 100644
--- a/_pages/it_IT/legacy-methods.txt
+++ b/_pages/it_IT/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Metodi Tradizionali"
Nell'ultimo periodo ci sono stati numerosi miglioramenti e avanzamenti ai metodi di installazione di CFW.
-Per questo motivo, è consigliato usare il metodo più recente descritto nella sezione [Seedminer](seedminer).
+Per questo motivo, è consigliato usare il metodo più recente descritto nella sezione [Cominciamo!](get-started).
Ciononostante, i metodi "tradizionali", più vecchi, vengono mantenuti qui per vari motivi. Ti servirà comunque aver eseguito precedentemente [Seedminer](seedminer).
diff --git a/_pages/it_IT/move-emunand.txt b/_pages/it_IT/move-emunand.txt
index 3bc5ab2741..07eaffdb18 100644
--- a/_pages/it_IT/move-emunand.txt
+++ b/_pages/it_IT/move-emunand.txt
@@ -16,7 +16,7 @@ DEVI aver già installato Luma3DS e boot9strap per poter proseguire.
### Cosa serve
*Una EmuNAND esistente
-* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versione v1.9.2pre1 di [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* L'ultima versione di [FBI](https://github.com/Steveice10/FBI/releases/)
### Istruzioni
diff --git a/_pages/it_IT/ntrboot.txt b/_pages/it_IT/ntrboot.txt
index 3d085f63ce..851ec2e1f2 100644
--- a/_pages/it_IT/ntrboot.txt
+++ b/_pages/it_IT/ntrboot.txt
@@ -17,24 +17,23 @@ Tieni presente che alcune cartucce hanno una "bomba a tempo" che impedirà loro
| Nome della Flashcart | Prezzo Attuale | "Bomba ad orologeria"? | Versioni 3DS? | Versioni DSi? | Note aggiuntive |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | €15.99 | 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato**; è possibile riflasharla per ripristinarla a flashcart NDS. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | €19.99 | No | <= 11.13.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato** ([Presenta un interruttore per alternare le modalità ntrboot e NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); da non flashare manualmente con ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | €15.99 | 3 Settembre 2019 | <= 11.14.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato**; è possibile riflasharla per ripristinarla a flashcart NDS. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | €19.99 | No | <= 11.14.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato** ([Presenta un interruttore per alternare le modalità ntrboot e NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); da non flashare manualmente con ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | €20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | €9.99 | No | Nessuna | Nessuna | Solo i modelli con [determinati flash chip](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) sono compatibili con ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | €19.99 | No | <= 11.13.0 | <= 1.4.5 | Tutte le versioni di RTS sono compatibili. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | €13.99 | 1.87:
- 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | €9.99 | 3.9b: 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. I modelli del 2013 non sono compatibili. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | €13.99 | 3.9b: 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. I modelli del 2013 non sono compatibili. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato** (presenta un interruttore per alternare le modalità ntrboot ("3DS") e NDS); da non flashare manualmente con ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | €19.99 | No | <= 11.14.0 | <= 1.4.5 | Tutte le versioni di RTS sono compatibili. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | €13.99 | 1.87: 3 Settembre 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | €9.99 | 3.9b: 3 Settembre 2019 | <= 11.14.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. I modelli del 2013 non sono compatibili. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | €13.99 | 3.9b: 3 Settembre 2019 | <= 11.14.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. I modelli del 2013 non sono compatibili. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Venduta con ntrboot preinstallato** (presenta un interruttore per alternare le modalità ntrboot ("3DS") e NDS); da non flashare manualmente con ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | Nessuna | Nessuna | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Sconosciuto | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: 3 Settembre 2019 | <= 11.13.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Sconosciuto | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: 3 Settembre 2019 | <= 11.14.0 | <= 1.4.5 | Tutte le flashcart R4iSDHC 20XX sono identiche. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/it_IT/region-changing.txt b/_pages/it_IT/region-changing.txt
index cc6b9672d2..25987a8632 100644
--- a/_pages/it_IT/region-changing.txt
+++ b/_pages/it_IT/region-changing.txt
@@ -29,7 +29,7 @@ DEVI aver già installato Luma3DS e boot9strap per poter proseguire.
### Cosa serve
-* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versione v1.9.2pre1 di [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* L'ultima versione di [FBI](https://github.com/Steveice10/FBI/releases/latest) *(il file `.3dsx`)*
* L'immagine CTRTransfer 11.5.0 relativa alla tua console e alla regione verso cui vuoi passare:
+ - [New 3DS o 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/it_IT/seedminer.txt b/_pages/it_IT/seedminer.txt
index cd19708b3f..2f3b32a74b 100644
--- a/_pages/it_IT/seedminer.txt
+++ b/_pages/it_IT/seedminer.txt
@@ -16,21 +16,7 @@ Questo metodo utilizza una scheda grafica di fascia alta per eseguire i calcoli
### Istruzioni
-#### Sezione I - Test di Compatibilità
-
-Anche se questo test non è strettamente necessario per l'esecuzione dell'exploit Seedminer, gli exploit successivi lo richiederanno e sarebbe uno spreco di tempo eseguire il primo senza poter poi eseguire i secondi.
-
-Ci sono diversi metodi basati sull'exploit Seedminer, quindi anche se questo test dovesse fallire puoi sempre utilizzare un altro metodo.
-
-#### Test Gestione Nintendo DSiWare (usato per unSAFE_MODE)
-
-1. Vai nelle Impostazioni della console, poi su "Gestione Dati", infine su "DSIWare"
-1. Se la tua console non si blocca, il test è riuscito
- + Se la console ritorna al menu HOME, il test è fallito e dovrai usare uno dei metodi tradizionali indicati in fondo a questa pagina
- + Se vedi una schermata colorata prima che la console ritorni al menu HOME, entra nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) (in Inglese) per richiedere assistenza
-1. Torna al menu HOME
-
-#### Sezione II - Preparazione
+#### Sezione I - Preparazione
1. Inserisci la scheda SD nel tuo computer
1. Entra nella cartella `Nintendo 3DS` della tua scheda SD
@@ -52,11 +38,12 @@ Ci sono diversi metodi basati sull'exploit Seedminer, quindi anche se questo tes
+ Se riscontri un errore e vieni rimandato al menu principale, o devi creare un nuovo Mii o la console non può connettersi ai server Nintendo (a causa di un ban o per problemi di connettività)
1. Sul tuo profilo Mii cerca il "Codice Amico" sullo schermo superiore
-#### Sezione III - Seedminer
+#### Sezione II - Seedminer
1. Avvia [Bruteforce Movable](https://seedminer.hacks.guide/) sul tuo computer
+ Questo sito permette il recupero automatico del file `movable_part1.sed` (utilizzando una console 3DS fittizia) e la decriptazione della chiave DSiWare della tua console (utilizzando Seedminer tramite il computer di un volontario)
- + Se il servizio automatizzato non funziona, entra nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) (in Inglese) per richiedere assistenza
+ + Se questo sito non è raggiungibile, prova a usare [quest'altro](https://bfm.nintendohomebrew.com/)
+ + Se entrambi i siti non sono raggiungibili, entra nel [canale Discord Nintendo Homebrew](https://discord.gg/MWxPgEp) e chiedi supporto (in Inglese)
1. Inserisci il Codice Amico della tua console (senza spazi o trattini) nel campo "Your friend code"
1. Incolla i 32 caratteri della cartella nel campo "Your ID0"
+ Non inserire l'ID0 a mano. Assicurati che l'ID0 sia stato inserito correttamente copiandolo e incollandolo da dove l'hai salvato nella sezione precedente
@@ -79,7 +66,7 @@ ___
Seedminer utilizza il tuo file `movable.sed` per sfruttare gli exploit presenti nel firmware SAFE_MODE presente in ogni console 3DS.
-Questo metodo è compatibile con tutte le regioni, anche se la regione CHN non è coperta da questa guida.
+Questo metodo è compatibile con tutte le regioni tranne CHN e TWN.
Prosegui con l'[Installazione di boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/it_IT/site-navigation.txt b/_pages/it_IT/site-navigation.txt
index c7a2e7e9e6..42a36b8b39 100644
--- a/_pages/it_IT/site-navigation.txt
+++ b/_pages/it_IT/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Completamento dell'installazione](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installazione di boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installazione di boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installazione di boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installazione di boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installazione di boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Spostare l'EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Cambiare regione](region-changing)
diff --git a/_pages/it_IT/uninstall-cfw.txt b/_pages/it_IT/uninstall-cfw.txt
index 89bced90a3..f2b3bb2e18 100644
--- a/_pages/it_IT/uninstall-cfw.txt
+++ b/_pages/it_IT/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella carte
### Cosa serve
-* L'ultima versione di [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* La versione v1.9.2pre1 di [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Istruzioni
@@ -41,12 +41,12 @@ Tieni presente che se hai altri file payload oltre a `GodMode9.firm` nella carte
+ Su una console "New", (X) sarà 2
+ Su una console "Old", (X) sarà 0
1. Seleziona il file `.app`
-1. Seleziona `NCCH Image Options`
+1. Seleziona `NCCH image options`
1. Seleziona `Mount image to drive`
1. Nella finestra che appare, apri la cartella `exefs`
1. In questa cartella, scegli il file `.firm`
-1. Seleziona "Firm Image Options"
-1. Seleziona "Boot Firm"
+1. Seleziona "FIRM image options"
+1. Seleziona "Boot FIRM"
1. Quando richiesto, scegli le opzioni per decriptare a fare una copia
1. Ora dovrebbe avviarsi il normale menu HOME del 3DS. In tal caso, spegni la console e prosegui con la prossima sezione
+ In caso CONTRARIO, proseguire con le istruzioni **BRICKERÀ** la tua console. Dovresti entrare nel [canale Discord di Nintendo Homebrew](https://discord.gg/MWxPgEp) (in Inglese) per richiedere assistenza
diff --git a/_pages/it_IT/updating-b9s.txt b/_pages/it_IT/updating-b9s.txt
index 2e36913a4d..d8e05a28ac 100644
--- a/_pages/it_IT/updating-b9s.txt
+++ b/_pages/it_IT/updating-b9s.txt
@@ -9,7 +9,7 @@ title: "Aggiornare B9S"
Questa pagina spiega come aggiornare la propria installazione di boot9strap all'ultima versione.
{% capture notice-1 %}
-È stata segnalata recentemente un'ondata di ban da parte di Nintendo riscontrata da utenti con CFW. Per ridurre il rischio che capiti anche a te, esegui i seguenti passaggi prima di iniziare questa guida:
+È stata segnalata recentemente un'ondata di ban da parte di Nintendo riscontrata da utenti con CFW. Per proteggerti, per favore esegui i seguenti passaggi prima di iniziare questa guida:
1. Entra nelle Impostazioni della Console, quindi in "Impostazioni Internet", poi "SpotPass" ed infine "Invio informazioni della console"
1. Disabilita l'impostazione "Invio informazioni della console"
diff --git a/_pages/ja_JP/ctrtransfer.txt b/_pages/ja_JP/ctrtransfer.txt
index 916be68c9b..3f9f348a4f 100644
--- a/_pages/ja_JP/ctrtransfer.txt
+++ b/_pages/ja_JP/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(機種とリージョンの両方が一致したものが下記にない場合、いずれかのリージョンから機種が一致しているものを一つ選択してください)*：
diff --git a/_pages/ja_JP/finalizing-setup.txt b/_pages/ja_JP/finalizing-setup.txt
index fb319d2aed..8820c219a4 100644
--- a/_pages/ja_JP/finalizing-setup.txt
+++ b/_pages/ja_JP/finalizing-setup.txt
@@ -26,7 +26,7 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/ja_JP/get-started.txt b/_pages/ja_JP/get-started.txt
index 9771048390..7f5349bbb6 100644
--- a/_pages/ja_JP/get-started.txt
+++ b/_pages/ja_JP/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
下の表からあなたのバージョンに合ったページを選択してください。 Note that the "from" and "to" fields are inclusive. 例えば、「9.0.0以降、9.2.0以前」は9.0.0、9.1.0と9.2.0を含めています。
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). その番号が「-0」ならば、ブラウザがインストールされていないことを示します。-0以上のいずれかの番号はそれがインストールされていることを示します。
-
-例えば、バージョンは「5.0.0-0U」ならば、「ブラウザなし」欄の「5.0.0以降、5.1.0以前」行に行きます。なぜならシステムバージョンはその範囲に合い、ブラウザがインストールされていないからです。
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Before starting, Windows users should enable the option to show file extensions
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| 以降 |
以前 |
- ブラウザなし |
- ブラウザ付き |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/ja_JP/godmode9-usage.txt b/_pages/ja_JP/godmode9-usage.txt
index 42127411be..3ad87a6e68 100644
--- a/_pages/ja_JP/godmode9-usage.txt
+++ b/_pages/ja_JP/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/ja_JP/home.txt b/_pages/ja_JP/home.txt
index a0c61c5273..d3b5175ec4 100644
--- a/_pages/ja_JP/home.txt
+++ b/_pages/ja_JP/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
すべてが計画通りに進めば、データは全く失われず、導入前にあなたが使用していたすべてのもの (ゲーム、NNID、セーブデータなど) が保持されます。
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt b/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/ja_JP/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..2f295bb082
--- /dev/null
+++ b/_pages/ja_JP/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **「Show NAND or user string in System Settings」**
+1. (Start) を押してセーブして再起動します
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ja_JP/installing-boot9strap-(usm).txt b/_pages/ja_JP/installing-boot9strap-(usm).txt
index 3e884213f9..fdfb4cfb84 100644
--- a/_pages/ja_JP/installing-boot9strap-(usm).txt
+++ b/_pages/ja_JP/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/ja_JP/legacy-methods.txt b/_pages/ja_JP/legacy-methods.txt
index f2ad998f35..4c5aa95012 100644
--- a/_pages/ja_JP/legacy-methods.txt
+++ b/_pages/ja_JP/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/ja_JP/move-emunand.txt b/_pages/ja_JP/move-emunand.txt
index 23cee54bbf..be4a85a33d 100644
--- a/_pages/ja_JP/move-emunand.txt
+++ b/_pages/ja_JP/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* 既存のEmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/ja_JP/ntrboot.txt b/_pages/ja_JP/ntrboot.txt
index 76f128345f..a5f018c69a 100644
--- a/_pages/ja_JP/ntrboot.txt
+++ b/_pages/ja_JP/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ja_JP/region-changing.txt b/_pages/ja_JP/region-changing.txt
index 19777bbee5..8af7483db8 100644
--- a/_pages/ja_JP/region-changing.txt
+++ b/_pages/ja_JP/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/ja_JP/seedminer.txt b/_pages/ja_JP/seedminer.txt
index d770f16191..c5b12fde52 100644
--- a/_pages/ja_JP/seedminer.txt
+++ b/_pages/ja_JP/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. パソコンにSDカードを入れます
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/ja_JP/site-navigation.txt b/_pages/ja_JP/site-navigation.txt
index 820f64fd3d..e87b3f3f2a 100644
--- a/_pages/ja_JP/site-navigation.txt
+++ b/_pages/ja_JP/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher（Soundhax）](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [EmuNANDを移動する](move-emunand)
+ [ntrboot](ntrboot)
+ [地域変更](region-changing)
diff --git a/_pages/ja_JP/uninstall-cfw.txt b/_pages/ja_JP/uninstall-cfw.txt
index e21bf06eda..d6b84c3f3b 100644
--- a/_pages/ja_JP/uninstall-cfw.txt
+++ b/_pages/ja_JP/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/ko_KR/ctrtransfer.txt b/_pages/ko_KR/ctrtransfer.txt
index 5528841116..02ba0afd98 100644
--- a/_pages/ko_KR/ctrtransfer.txt
+++ b/_pages/ko_KR/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(기기에 맞는 지역이 없다면, 기기 종류만 맞추어 아무 파일이나 선택해 주세요)*
diff --git a/_pages/ko_KR/finalizing-setup.txt b/_pages/ko_KR/finalizing-setup.txt
index f0cb4df607..f1300e58b6 100644
--- a/_pages/ko_KR/finalizing-setup.txt
+++ b/_pages/ko_KR/finalizing-setup.txt
@@ -26,7 +26,7 @@ The file `boot.firm` is what is launched by boot9strap itself after it finishes
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/ko_KR/get-started.txt b/_pages/ko_KR/get-started.txt
index 106a497594..a8330d55d5 100644
--- a/_pages/ko_KR/get-started.txt
+++ b/_pages/ko_KR/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
아래 표에서 본인 기기의 버전에 해당하는 페이지를 선택해 주세요. "이상" 및 "이하" 란은 그 칸에 적힌 버전을 포함한다는 점을 참고해 주세요. 예를 들어, "9.0.0 이상 9.2.0 이하"는 9.0.0, 9.1.0및 9.2.0을 모두 포함합니다.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). 버전이 -0이면 브라우저가 없으며, -0 이상의 숫자는 브라우저가 설치되어 있음을 나타냅니다.
-
-"5.0.0-0U"의 경우 설치된 브라우저가 없으므로 "브라우저 없음" 열의 "5.0.0 이상 5.1.0 이하" 행을 선택하면 됩니다.
-
기기의 버전은 본체 설정에 어가서 위쪽 화면의 우측 하단에서 확인할 수 있습니다.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ This page is for instructions on how to install boot9strap to a *stock* 3DS or 2
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| 이상 |
이하 |
- 브라우저 없음 |
- 브라우저 있음 |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/ko_KR/godmode9-usage.txt b/_pages/ko_KR/godmode9-usage.txt
index e1bba2cde6..4402305e8d 100644
--- a/_pages/ko_KR/godmode9-usage.txt
+++ b/_pages/ko_KR/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/ko_KR/home.txt b/_pages/ko_KR/home.txt
index 01d1a2577f..578bc6f76f 100644
--- a/_pages/ko_KR/home.txt
+++ b/_pages/ko_KR/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ 모든 것이 계획대로 진행될 경우 시작할 때 갖고 있던 데이터가 모두 보존됩니다. (게임, NNID, 저장 데이터 등)
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ SD 카드는 [GPT가 아니라 MBR](http://www.howtogeek.com/245610/) 기반이어야 합니다. (처음 샀을 때 끼워져 있는 SD 카드는 기본적으로 MBR입니다.)
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ SD 카드는 [GPT가 아니라 MBR](http://www.howtogeek.com/245610/) 기반이어야 합니다. (처음 샀을 때 끼워져 있는 SD 카드는 기본적으로 MBR입니다.) The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt b/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/ko_KR/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..42f8eac6fb
--- /dev/null
+++ b/_pages/ko_KR/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. (start)를 눌러 저장하고 기기를 다시 시작해 주세요.
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. 성공하면 홈브류 런처가 실행될 것입니다.
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ko_KR/installing-boot9strap-(usm).txt b/_pages/ko_KR/installing-boot9strap-(usm).txt
index fd34a8ffc2..813fd4572e 100644
--- a/_pages/ko_KR/installing-boot9strap-(usm).txt
+++ b/_pages/ko_KR/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/ko_KR/legacy-methods.txt b/_pages/ko_KR/legacy-methods.txt
index f2ad998f35..4c5aa95012 100644
--- a/_pages/ko_KR/legacy-methods.txt
+++ b/_pages/ko_KR/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/ko_KR/move-emunand.txt b/_pages/ko_KR/move-emunand.txt
index ce4abe812c..7c5af6a34e 100644
--- a/_pages/ko_KR/move-emunand.txt
+++ b/_pages/ko_KR/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* 설치된 EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/ko_KR/ntrboot.txt b/_pages/ko_KR/ntrboot.txt
index 76f128345f..a5f018c69a 100644
--- a/_pages/ko_KR/ntrboot.txt
+++ b/_pages/ko_KR/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ko_KR/region-changing.txt b/_pages/ko_KR/region-changing.txt
index d3d4924330..d4a09ea015 100644
--- a/_pages/ko_KR/region-changing.txt
+++ b/_pages/ko_KR/region-changing.txt
@@ -30,7 +30,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/ko_KR/seedminer.txt b/_pages/ko_KR/seedminer.txt
index 0e894f88f9..10bd882e3b 100644
--- a/_pages/ko_KR/seedminer.txt
+++ b/_pages/ko_KR/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. SD 카드를 컴퓨터에 삽입해 주세요.
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/ko_KR/site-navigation.txt b/_pages/ko_KR/site-navigation.txt
index fc55bb75da..697eac83de 100644
--- a/_pages/ko_KR/site-navigation.txt
+++ b/_pages/ko_KR/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [홈브류 런처 (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [EmuNAND기반 데이터 이동](move-emunand)
+ [ntrboot](ntrboot)
+ [지역 변경](region-changing)
diff --git a/_pages/ko_KR/uninstall-cfw.txt b/_pages/ko_KR/uninstall-cfw.txt
index 3d45aecba9..f5ee35880e 100644
--- a/_pages/ko_KR/uninstall-cfw.txt
+++ b/_pages/ko_KR/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/ms_MY/ctrtransfer.txt b/_pages/ms_MY/ctrtransfer.txt
index ff5562f587..ec30370296 100644
--- a/_pages/ms_MY/ctrtransfer.txt
+++ b/_pages/ms_MY/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(Jika peranti anda tiada disenaraikan diantara semua kawasan ini, sila pilih satu yang menyerupai jenis peranti anda)*:
diff --git a/_pages/ms_MY/finalizing-setup.txt b/_pages/ms_MY/finalizing-setup.txt
index c7cc92e950..6581b4d509 100644
--- a/_pages/ms_MY/finalizing-setup.txt
+++ b/_pages/ms_MY/finalizing-setup.txt
@@ -26,7 +26,7 @@ Semasa proses ini, kami juga akan memasang program-program berikut:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/ms_MY/get-started.txt b/_pages/ms_MY/get-started.txt
index 2be2c04047..941773cf39 100644
--- a/_pages/ms_MY/get-started.txt
+++ b/_pages/ms_MY/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Pilih halaman yang sesuai untuk versi anda berdasarkan carta dibawah. Note that the "from" and "to" fields are inclusive. Ini bermakna, sebagai contoh, "dari 9.0.0 hingga 9.2.0" termasuk 9.0.0, 9.1.0 dan 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Jika versinya ialah -0 anda tidak mempunyai browser, manakala jika ada ternampak apa-apa nombor atas -0 ia menunjukkan browser sudah dipasang.
-
-Sebagai contoh didalam kes "5.0.0-0U", anda akan mengikuti barisan melintang "Tiada Browser" dan barisan 5.0.0 hingga 5.1.0 kerana ianya berada di lingkungan versi sistem dan tiada browser dipasang.
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Sebelum bermula, sila pastikan kad SD anda tiada sebarang kerosakkan dengan meng
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| Dari |
Hingga |
- Tiada Browser |
- Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/ms_MY/godmode9-usage.txt b/_pages/ms_MY/godmode9-usage.txt
index 9c5124a46d..57bed709a1 100644
--- a/_pages/ms_MY/godmode9-usage.txt
+++ b/_pages/ms_MY/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/ms_MY/home.txt b/_pages/ms_MY/home.txt
index 078fa8f610..a71ab19bad 100644
--- a/_pages/ms_MY/home.txt
+++ b/_pages/ms_MY/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ Jika segala-galanya mengikut perancangan, anda tidak akan kehilangan sebarang data dan akhirnya masih yang sama (games, NNID, saves, dan sebagainya akan dikekalkan).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt b/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/ms_MY/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..8e103f9049
--- /dev/null
+++ b/_pages/ms_MY/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Tekan (Start) untuk save dan reboot
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ms_MY/installing-boot9strap-(usm).txt b/_pages/ms_MY/installing-boot9strap-(usm).txt
index e673380dac..da773908bc 100644
--- a/_pages/ms_MY/installing-boot9strap-(usm).txt
+++ b/_pages/ms_MY/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/ms_MY/legacy-methods.txt b/_pages/ms_MY/legacy-methods.txt
index f2ad998f35..4c5aa95012 100644
--- a/_pages/ms_MY/legacy-methods.txt
+++ b/_pages/ms_MY/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/ms_MY/move-emunand.txt b/_pages/ms_MY/move-emunand.txt
index a2dd41b3c3..b9d7fac211 100644
--- a/_pages/ms_MY/move-emunand.txt
+++ b/_pages/ms_MY/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* Satu EmuNAND yang sedia ada
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/ms_MY/ntrboot.txt b/_pages/ms_MY/ntrboot.txt
index 76f128345f..a5f018c69a 100644
--- a/_pages/ms_MY/ntrboot.txt
+++ b/_pages/ms_MY/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ms_MY/region-changing.txt b/_pages/ms_MY/region-changing.txt
index b49efb8492..688946a4a7 100644
--- a/_pages/ms_MY/region-changing.txt
+++ b/_pages/ms_MY/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/ms_MY/seedminer.txt b/_pages/ms_MY/seedminer.txt
index c6f1e5e669..5b437f0dd5 100644
--- a/_pages/ms_MY/seedminer.txt
+++ b/_pages/ms_MY/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Pasang kad SD anda ke dalam komputer
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/ms_MY/site-navigation.txt b/_pages/ms_MY/site-navigation.txt
index ba87e1732c..6310364879 100644
--- a/_pages/ms_MY/site-navigation.txt
+++ b/_pages/ms_MY/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Pindah EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Menukar Kawasan](region-changing)
diff --git a/_pages/ms_MY/uninstall-cfw.txt b/_pages/ms_MY/uninstall-cfw.txt
index ec8ecf028a..1e06bc7540 100644
--- a/_pages/ms_MY/uninstall-cfw.txt
+++ b/_pages/ms_MY/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/nl_NL/ctrtransfer.txt b/_pages/nl_NL/ctrtransfer.txt
index 8e738797cb..2bd96d806e 100644
--- a/_pages/nl_NL/ctrtransfer.txt
+++ b/_pages/nl_NL/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(Als jouw apparaat niet uit één van deze regio's afkomstig is, kan je een apparaat van hetzelfde type kiezen)*:
diff --git a/_pages/nl_NL/finalizing-setup.txt b/_pages/nl_NL/finalizing-setup.txt
index ef32aa70cd..35b66ad438 100644
--- a/_pages/nl_NL/finalizing-setup.txt
+++ b/_pages/nl_NL/finalizing-setup.txt
@@ -26,7 +26,7 @@ Tijdens dit proces zullen we ook de volgende programma's installeren:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/nl_NL/get-started.txt b/_pages/nl_NL/get-started.txt
index 74be4e0806..ee968b4738 100644
--- a/_pages/nl_NL/get-started.txt
+++ b/_pages/nl_NL/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Kies de juiste pagina die bij jouw versie hoort uit onderstaande tabel. Note that the "from" and "to" fields are inclusive. Dit betekent dat, bijvoorbeeld, de "van 9.0.0 to 9.2.0" rij 9.0.0, 9.1.0, en 9.2.0 inhoudt.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Als de versie -0 is heb je geen browser. Elk nummer dat hoger is dan -0 geeft aan dat er een browser geïnstalleerd is.
-
-In het geval van bijvoorbeeld "5.0.0-0U", moet je de "Geen Browser" kolom en de "5.0.0 tot 5.1.0" rij gebruiken. Je systeem heeft in dit geval namelijk geen browser en een versie die daar tussen valt.
-
De systeemversie van je 3DS kan je rechtsonder op het bovenste scherm in de systeeminstellingen vinden.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Voordat je begint is het handig om je SD kaart te controleren op fouten met behu
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| Van |
Naar |
- Geen Browser |
- Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/nl_NL/godmode9-usage.txt b/_pages/nl_NL/godmode9-usage.txt
index 381fe106d2..ec9217c807 100644
--- a/_pages/nl_NL/godmode9-usage.txt
+++ b/_pages/nl_NL/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/nl_NL/home.txt b/_pages/nl_NL/home.txt
index 30beb551b3..f609372131 100644
--- a/_pages/nl_NL/home.txt
+++ b/_pages/nl_NL/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ als alles volgens plan gaat, zal je geen data verliezen en eindigen met alles waarmee je begon (spellen, NNID, saves, etc. zullen bewaard blijven).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Je SD kaart zal een [MBR, niet GPT](http://www.howtogeek.com/245610/) (de SD card die standaard komt bij je 3DS is MBR) moeten zijn.
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Je SD kaart zal een [MBR, niet GPT](http://www.howtogeek.com/245610/) (de SD card die standaard komt bij je 3DS is MBR) moeten zijn. The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt b/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/nl_NL/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..6cf71d13c5
--- /dev/null
+++ b/_pages/nl_NL/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Druk op (Start) om op te slaan en opnieuw op te starten
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Nu zou je console de Homebrew Launcher moeten openen
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/nl_NL/installing-boot9strap-(usm).txt b/_pages/nl_NL/installing-boot9strap-(usm).txt
index 7615f8a7c1..23e5b38d76 100644
--- a/_pages/nl_NL/installing-boot9strap-(usm).txt
+++ b/_pages/nl_NL/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/nl_NL/legacy-methods.txt b/_pages/nl_NL/legacy-methods.txt
index f2ad998f35..4c5aa95012 100644
--- a/_pages/nl_NL/legacy-methods.txt
+++ b/_pages/nl_NL/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/nl_NL/move-emunand.txt b/_pages/nl_NL/move-emunand.txt
index c8b08806fa..e1c8aaabf3 100644
--- a/_pages/nl_NL/move-emunand.txt
+++ b/_pages/nl_NL/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* Een bestaande EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/nl_NL/ntrboot.txt b/_pages/nl_NL/ntrboot.txt
index 76f128345f..a5f018c69a 100644
--- a/_pages/nl_NL/ntrboot.txt
+++ b/_pages/nl_NL/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/nl_NL/region-changing.txt b/_pages/nl_NL/region-changing.txt
index 96a27bcbda..8cdbd7bd45 100644
--- a/_pages/nl_NL/region-changing.txt
+++ b/_pages/nl_NL/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/nl_NL/seedminer.txt b/_pages/nl_NL/seedminer.txt
index a9d668675b..658e0ccd67 100644
--- a/_pages/nl_NL/seedminer.txt
+++ b/_pages/nl_NL/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Plaats je SD kaart in je computer
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/nl_NL/site-navigation.txt b/_pages/nl_NL/site-navigation.txt
index fe409ff3aa..1726a20b63 100644
--- a/_pages/nl_NL/site-navigation.txt
+++ b/_pages/nl_NL/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [EmuNAND Verplaatsen](move-emunand)
+ [ntrboot](ntrboot)
+ [Regio Wijzigen](region-changing)
diff --git a/_pages/nl_NL/uninstall-cfw.txt b/_pages/nl_NL/uninstall-cfw.txt
index 6ad2b48691..4b95dcd08d 100644
--- a/_pages/nl_NL/uninstall-cfw.txt
+++ b/_pages/nl_NL/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/no_NO/ctrtransfer.txt b/_pages/no_NO/ctrtransfer.txt
index 730ca2df39..514f71b315 100644
--- a/_pages/no_NO/ctrtransfer.txt
+++ b/_pages/no_NO/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(Hvis enheten din ikke er fra en av disse regionene, bare velg en som passer til enhetstypen din)*:
diff --git a/_pages/no_NO/finalizing-setup.txt b/_pages/no_NO/finalizing-setup.txt
index d9a890c77a..0ac7e76f8f 100644
--- a/_pages/no_NO/finalizing-setup.txt
+++ b/_pages/no_NO/finalizing-setup.txt
@@ -26,7 +26,7 @@ Under denne prossesen, vil vi også sette opp program som følgende:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/no_NO/get-started.txt b/_pages/no_NO/get-started.txt
index 6334f1a6e5..28bf12e41f 100644
--- a/_pages/no_NO/get-started.txt
+++ b/_pages/no_NO/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Velg den aktuelle siden for din versjon fra diagrammet nedenfor. Note that the "from" and "to" fields are inclusive. Dette betyr at for eksempel, raden "fra 9.0.0 til 9.2.0" inkluderer 9.0.0, 9.1.0, og 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Hvis versjonen er -0 da har du ikke en nettleser, mens et tall over -0 indikerer at en nettleser er installert.
-
-I tilfellet av "5.0.0-0U" for eksempel, ville du fulgt "ingen nettleser" kolonnen og 5.0.0 til 5.1.0 raden fordi systemet er på system versjonen i det området og har ingen nettleser installert.
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Før du starter kan det være lurt å sjekke om SD-kortet er korrupt, du kan sje
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| Fra |
Til |
- Uten Nettleser |
- Nettleser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/no_NO/godmode9-usage.txt b/_pages/no_NO/godmode9-usage.txt
index 6ba9739b5c..0e4cb13190 100644
--- a/_pages/no_NO/godmode9-usage.txt
+++ b/_pages/no_NO/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/no_NO/home.txt b/_pages/no_NO/home.txt
index 12c5c8d988..52a552caab 100644
--- a/_pages/no_NO/home.txt
+++ b/_pages/no_NO/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ Hvis alt går etter planen, vil du ikke miste data, og ende opp med alt som du startet med (spill, NNID, saver, osv blir bevart).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt b/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/no_NO/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/no_NO/installing-boot9strap-(hbl-usm).txt b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..1c26c7e5dc
--- /dev/null
+++ b/_pages/no_NO/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Trykk (Start) for å lagre og starte på nytt
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/no_NO/installing-boot9strap-(usm).txt b/_pages/no_NO/installing-boot9strap-(usm).txt
index 59142ba9cf..fd213b9538 100644
--- a/_pages/no_NO/installing-boot9strap-(usm).txt
+++ b/_pages/no_NO/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/no_NO/legacy-methods.txt b/_pages/no_NO/legacy-methods.txt
index f2ad998f35..4c5aa95012 100644
--- a/_pages/no_NO/legacy-methods.txt
+++ b/_pages/no_NO/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/no_NO/move-emunand.txt b/_pages/no_NO/move-emunand.txt
index abb26363a7..9aee1f874f 100644
--- a/_pages/no_NO/move-emunand.txt
+++ b/_pages/no_NO/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* En eksisterende EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/no_NO/ntrboot.txt b/_pages/no_NO/ntrboot.txt
index 76f128345f..a5f018c69a 100644
--- a/_pages/no_NO/ntrboot.txt
+++ b/_pages/no_NO/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/no_NO/region-changing.txt b/_pages/no_NO/region-changing.txt
index 6edc16c525..643e805937 100644
--- a/_pages/no_NO/region-changing.txt
+++ b/_pages/no_NO/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/no_NO/seedminer.txt b/_pages/no_NO/seedminer.txt
index ca67983db5..e638eded14 100644
--- a/_pages/no_NO/seedminer.txt
+++ b/_pages/no_NO/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Sett inn SD-kortet i datamaskinen din
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/no_NO/site-navigation.txt b/_pages/no_NO/site-navigation.txt
index f020a758bf..6365f3b8ba 100644
--- a/_pages/no_NO/site-navigation.txt
+++ b/_pages/no_NO/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Flytt EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region bytte](region-changing)
diff --git a/_pages/no_NO/uninstall-cfw.txt b/_pages/no_NO/uninstall-cfw.txt
index 66b4f5ed3e..925cd5cd16 100644
--- a/_pages/no_NO/uninstall-cfw.txt
+++ b/_pages/no_NO/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/pl_PL/ctrtransfer.txt b/_pages/pl_PL/ctrtransfer.txt
index 92578d8eb6..6d22b97ed1 100644
--- a/_pages/pl_PL/ctrtransfer.txt
+++ b/_pages/pl_PL/ctrtransfer.txt
@@ -17,7 +17,7 @@ MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać.
### Czego Potrzebujesz
-* Najnowszej wersji [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Najnowszej wersji [FBI](https://github.com/Steveice10/FBI/releases/latest) *(pliku `.3dsx`)*
* Obrazu CTRTransfer 11.5.0 dla twojego urządzenia i regionu
*(jeśli twoja konsola nie jest z żadnego z tych regionów, po prostu wybierz dowolny zgodny z typem twojej konsoli)*:
diff --git a/_pages/pl_PL/finalizing-setup.txt b/_pages/pl_PL/finalizing-setup.txt
index 221d44b839..4fb68b53e0 100644
--- a/_pages/pl_PL/finalizing-setup.txt
+++ b/_pages/pl_PL/finalizing-setup.txt
@@ -26,7 +26,7 @@ Podczas tego procesu zainstalujemy również takie programy jak:
* Najnowszej wersji [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(pliku `.cia`)*
* Najnowszej wersji [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(pliku `.cia`)*
* Najnowszej wersji [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* Najnowszej wersji [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Najnowszej wersji [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* Najnowszej wersji [FBI](https://github.com/Steveice10/FBI/releases/latest) *(pliki `.cia` oraz `.3dsx`)*
* Najnowszej wersji [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/pl_PL/get-started.txt b/_pages/pl_PL/get-started.txt
index 0d52c965b6..1c34c8efc5 100644
--- a/_pages/pl_PL/get-started.txt
+++ b/_pages/pl_PL/get-started.txt
@@ -8,10 +8,6 @@ title: "Wprowadzenie"
Wybierz odpowiednią podstronę dla swojej wersji firmware z poniższej tabeli. Pola "od" oraz "do" są włączne dla wersji. To oznacza, przykładowo, iż wiersz "od 9.0.0 do 9.2.0" zawiera wersje firmware 9.0.0, 9.1.0 oraz 9.2.0.
-Ostatnie dwie kolumny tabeli dotyczą ostatniego numeru twojej wersji softu (która odpowiada wersji wbudowanej przeglądarki internetowej). Jeżeli ta wersja to -0 znaczy to, że nie posiadasz przeglądarki, każda cyfra powyżej -0 oznacza zainstalowaną przeglądarkę internetową.
-
-Na przykładzie wersji "5.0.0-0U": wziąłbyś pod uwagę kolumnę "Brak przeglądarki" oraz wiersz "5.0.0 do 5.1.0" ponieważ konsola ma wersję softu zawierającą się w tym przedziale i nie ma na niej przeglądarki.
-
Wersja twojej konsoli jest widoczna w prawym dolnym rogu górnego ekranu System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Zanim rozpoczniesz, zastanów się nad sprawdzeniem swojej karty SD pod kątem b
{: .notice--warning}
{% capture notice-1 %}
-Były zgłaszane raporty fali banów dla użytkowników CFW od Nintendo. Aby siebie ochronić, podążaj za poniższymi krokami przed rozpoczęciem poradnika:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Wejdź do System Settings, potem do "Internet Settings", potem "SpotPass", a następnie "Sending of System Information"
-1. Zablokuj opcję "Sending of System Information"
-1. Wyjdź z System Settings
-1. Wejdź do Listy Znajomych [pomarańczowa ikona twarzy]({{ "/images/friend-list-icon.png" | absolute_url }}) w górnej linii głównego menu
- + Jeśli wyświetli się błąd i zostaniesz wyrzucony z menu, lista znajomych jest albo już wyłączona lub twoja konsola nie może się połączyć z serwerami Nintendo (przez bana lub problemy z połączeniem)
-1. Wejdź do ustawień Listy Znajomych, potem "Friend Notification Settings", a następnie "Show friends what you're playing"
-1. Zablokuj opcję "Show friends what you're playing"
-1. Wyjdź z Listy Znajomych
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ Były zgłaszane raporty fali banów dla użytkowników CFW od Nintendo. Aby sie
| Od |
Do |
- Brak przeglądarki |
- Przeglądarka |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Instalacja boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
WSZYSTKIE WERSJE
|
- ntrboot
(Wymagany kompatybilny Flashcart) lub Instalacja boot9strap (Hardmod)
(Wymagana umiejętność lutowania) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/pl_PL/godmode9-usage.txt b/_pages/pl_PL/godmode9-usage.txt
index bd2a010a4e..931408e338 100644
--- a/_pages/pl_PL/godmode9-usage.txt
+++ b/_pages/pl_PL/godmode9-usage.txt
@@ -22,7 +22,7 @@ Niektóre z poniższych instrukcji mają zastosowanie tylko do najnowszej wersji
### Czego Potrzebujesz
-* Najnowszej wersji [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instrukcje
diff --git a/_pages/pl_PL/home.txt b/_pages/pl_PL/home.txt
index c036771411..a968d04642 100644
--- a/_pages/pl_PL/home.txt
+++ b/_pages/pl_PL/home.txt
@@ -81,8 +81,8 @@ Aby zobaczyć pełną listę podpisów sighax, zobacz [ten gist](https://gist.gi
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ Jeśli wszystko pójdzie zgodnie z planem, nie stracisz żadnych danych i wszystko pozostanie tak, jak przed rozpoczęciem poradnika (gry, NNID, zapisy itp. zostaną zachowane).
+ Pozostaw swoją konsolę podłączoną do ładowarki i naładowaną podczas całego procesu, aby nie dopuścić do utraty danych, lub uszkodzenia spowodowanego niespodziewanym wyłączeniem konsoli!
-+ Tabelą partycji twojej karty SD powinien być [MBR, nie GPT](http://www.howtogeek.com/245610/) (karta SD, która przychodzi z twoim urządzeniem będzie domyślnie w MBR).
-+ Jeśli potrzebujesz sformatować nowo zakupioną kartę SD, możesz użyć [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) i ustawić rozmiar jednostki alokacji (Allocation Unit Size) na 32K (32768).
++ Tabelą partycji twojej karty SD powinien być [MBR, nie GPT](http://www.howtogeek.com/245610/) (karta SD, która przychodzi z twoim urządzeniem będzie domyślnie w MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ Old 2DS jest niemal identyczny jak Old 3DS pod względem oprogramowania, podczas gdy New 2DS jest zasadniczo identyczny jak New 3DS nowy pod względem oprogramowania. Kroki które mówią o "Old 3DS" można śmiało zastosować do Old 2DS, zaś wszystkie kroki opisane jako "New 3DS" pasują również do New 2DS.
___
diff --git a/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt b/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..4a1fa7b371
--- /dev/null
+++ b/_pages/pl_PL/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Spis Treści" %}
+
+### Wymagana Lektura
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### Czego Potrzebujesz
+
+* Najnowszej wersji [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instrukcje
+
+#### Sekcja I - Przygotowanie
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Poczekaj na zakończenie procesu
+ + If it displays a yellow screen, power your console off, then try this section again
+ + Jeśli pojawi się błąd, [przejdź do rozwiązywania problemów](troubleshooting#a-browser-based-exploit-is-not-working)
+1. Jeśli Soundhax zadziałał, uruchomi się Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..374439ce27
--- /dev/null
+++ b/_pages/pl_PL/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Spis Treści" %}
+
+### Wymagana Lektura
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### Czego Potrzebujesz
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Sekcja I - Przygotowanie
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Sekcja III - Konfiguracja Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Użyj przycisku (A) oraz D-Pada aby zaznaczyć:
+ + **"Show NAND or user string in System Settings"**
+1. Naciśnij (Start) aby zapisać zmiany i uruchomić konsolę ponownie
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Uruchom aplikację Download Play
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Wybierz "Miscellaneous options"
+1. Wybierz "Switch the hb. title to the current app."
+1. Naciśnij (B) aby kontynuować
+1. Naciśnij (B) aby powrócić do głównego menu Rosalina
+1. Naciśnij (B) aby zamknąć menu Rosalina
+1. Naciśnij (Home), a następnie zamknij aplikację Download Play
+1. Relaunch the Download Play application
+1. Twoja konsola powinna załadować Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Kontynuuj do [Finalizowanie Instalacji](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pl_PL/installing-boot9strap-(usm).txt b/_pages/pl_PL/installing-boot9strap-(usm).txt
index 922dc916a2..baef548f99 100644
--- a/_pages/pl_PL/installing-boot9strap-(usm).txt
+++ b/_pages/pl_PL/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Sekcja I - Przygotowanie
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/pl_PL/legacy-methods.txt b/_pages/pl_PL/legacy-methods.txt
index 3924040c91..673cc5fbad 100644
--- a/_pages/pl_PL/legacy-methods.txt
+++ b/_pages/pl_PL/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/pl_PL/move-emunand.txt b/_pages/pl_PL/move-emunand.txt
index 6d88b97c0c..b838088e4c 100644
--- a/_pages/pl_PL/move-emunand.txt
+++ b/_pages/pl_PL/move-emunand.txt
@@ -16,7 +16,7 @@ MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać.
### Czego Potrzebujesz
* Istniejącego EmuNAND
-* Najnowszej wersji [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Najnowszej wersji [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instrukcje
diff --git a/_pages/pl_PL/ntrboot.txt b/_pages/pl_PL/ntrboot.txt
index 837a8c4fea..d97f00e944 100644
--- a/_pages/pl_PL/ntrboot.txt
+++ b/_pages/pl_PL/ntrboot.txt
@@ -17,23 +17,23 @@ Zauważ, że flashcarty z "Time Bomb" nie będą w stanie uruchamiać plików `.
| Nazwa Flashcarta | Aktualna Cena | "Time Bomb"? | Wersje 3DS'a? | Wersje DSi? | Inne Uwagi |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | Nie | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Modele 2013 nie są kompatybilne. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Modele 2013 nie są kompatybilne. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Modele 2013 nie są kompatybilne. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Modele 2013 nie są kompatybilne. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | Nie | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | Nie | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | Nie | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | Nie | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/pl_PL/region-changing.txt b/_pages/pl_PL/region-changing.txt
index 53e79de84f..0b2ee58e9a 100644
--- a/_pages/pl_PL/region-changing.txt
+++ b/_pages/pl_PL/region-changing.txt
@@ -29,7 +29,7 @@ MUSISZ mieć już zainstalowany Luma3DS i boot9strap żeby to wykonać.
### Czego Potrzebujesz
-* Najnowszej wersji [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Najnowszej wersji [FBI](https://github.com/Steveice10/FBI/releases/latest) *(pliku `.3dsx`)*
* Plik CTRTransfer 11.5.0 dla typu konsoli, której używasz oraz regionu, na który chcesz przejść:
+ - [New 3DS lub 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/pl_PL/seedminer.txt b/_pages/pl_PL/seedminer.txt
index cf55f2971a..f18281f78c 100644
--- a/_pages/pl_PL/seedminer.txt
+++ b/_pages/pl_PL/seedminer.txt
@@ -16,21 +16,7 @@ Metoda ta wymaga użycia wydajnej karty graficznej, aby wykonać potrzebne oblic
### Instrukcje
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Sekcja II - Przygotowanie
+#### Sekcja I - Przygotowanie
1. Włóż kartę SD do komputera
1. Przejdź do folderu `Nintendo 3DS` na karcie SD
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ Jeśli wyświetli się błąd i zostaniesz wyrzucony z menu, musisz stworzyć nową postać Mii, lub twoja konsola nie może się połączyć z serwerami Nintendo (przez bana lub problemy z połączeniem)
1. Wejdź na profil swojego Mii, a następnie znajdź pole "Friend Code" na górnym ekranie
-#### Sekcja III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/pl_PL/site-navigation.txt b/_pages/pl_PL/site-navigation.txt
index 2af326dd43..f1b9994dc5 100644
--- a/_pages/pl_PL/site-navigation.txt
+++ b/_pages/pl_PL/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizowanie Instalacji](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Instalacja boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Przenoszenie EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Zmiana Regionu Konsoli](region-changing)
diff --git a/_pages/pl_PL/uninstall-cfw.txt b/_pages/pl_PL/uninstall-cfw.txt
index 1402c89296..98acbfd5bd 100644
--- a/_pages/pl_PL/uninstall-cfw.txt
+++ b/_pages/pl_PL/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Zauważ, że jeżeli będziesz miał pliki inne niż `GodMode9.firm` w folderze
### Czego Potrzebujesz
-* Najnowszej wersji [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instrukcje
@@ -41,12 +41,12 @@ Zauważ, że jeżeli będziesz miał pliki inne niż `GodMode9.firm` w folderze
+ Na "New" 3DS, zamiast (X) będzie widać "2"
+ Na zwykłym 3DS, zamiast (X) będzie widać "0"
1. Wybierz plik `.app`
-1. Wybierz `NCCH Image Options`
+1. Select `NCCH image options`
1. Wybierz `Mount image to drive`
1. W oknie które się pojawi, otwórz folder `exefs`
1. W tym folderze, wybierz plik `.firm`
-1. Select "Firm Image Options"
-1. Wybierz "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. Kiedy zostaniesz o to zapytany, wybierz odszyfrowanie (decrypt) i utworzenie kopii
1. Konsola powinna uruchomić zwyczajne Home Menu. Jeśli tak się stało, wyłącz konsolę i przejdź do następnej sekcji
+ Jeśli zwykłe Home Menu się NIE uruchomiło, wykonanie następnych sekcji tego poradnika **NA PEWNO** uszkodzi twoją konsolę. Powinieneś dołączyć do [Serwera Nintendo Homebrew na Discordzie](https://discord.gg/MWxPgEp) i zapytać (po angielsku) czy ktoś mógłby Ci pomóc
diff --git a/_pages/pl_PL/updating-b9s.txt b/_pages/pl_PL/updating-b9s.txt
index 741976815e..be3717d4e7 100644
--- a/_pages/pl_PL/updating-b9s.txt
+++ b/_pages/pl_PL/updating-b9s.txt
@@ -9,15 +9,15 @@ title: "Aktualizowanie B9S"
Ta strona poświęcona jest obecnym użytkownikom boot9strap, którzy chcą zaktualizować boot9strap do najnowszej wersji.
{% capture notice-1 %}
-Były zgłaszane raporty fali banów dla użytkowników CFW od Nintendo. Aby siebie ochronić, podążaj za poniższymi krokami przed rozpoczęciem poradnika:
+Były zgłaszane raporty fal banów dla użytkowników CFW od Nintendo. Aby ochronić się, wykonaj poniższe kroki przed rozpoczęciem poradnika:
-1. Wejdź do System Settings, potem do "Internet Settings", potem "SpotPass", a następnie "Sending of System Information"
+1. Wejdź do System Settings, następnie do "Internet Settings", "SpotPass", i "Sending of System Information"
1. Zablokuj opcję "Sending of System Information"
1. Wyjdź z System Settings
1. Wejdź do Listy Znajomych (pomarańczowa ikona twarzy)({{ "/images/friend-list-icon.png" | absolute_url }}) w górnej linii Home menu
+ Jeśli wyświetli się błąd i zostaniesz wyrzucony z menu, lista znajomych jest albo już wyłączona lub twoja konsola nie może się połączyć z serwerami Nintendo (przez bana lub problemy z połączeniem)
1. Wejdź do ustawień Listy Znajomych, potem "Friend Notification Settings", potem "Show friends what you're playing"
-1. Zablokuj opcję "Show friends what you're playing"
+1. Wyłącz opcję "Show friends what you're playing"
1. Wyjdź z Listy Znajomych
{% endcapture %}
diff --git a/_pages/pt_BR/a9lh-to-b9s.txt b/_pages/pt_BR/a9lh-to-b9s.txt
index 2c2d50ee93..cb8cb3d490 100644
--- a/_pages/pt_BR/a9lh-to-b9s.txt
+++ b/_pages/pt_BR/a9lh-to-b9s.txt
@@ -4,7 +4,7 @@ title: "Atualizando para o B9S"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Esta página é para usuários de uma instalção arm9loaderhax pré existente atualizarem seus dispositivos para boot9strap.
@@ -18,15 +18,15 @@ Se você tiver um PIN habilitado no Luma3DS, SafeB9SInstaller lhe dará um erro
{: .notice--warning}
{% capture notice-1 %}
-Há relatos de uma onda de bans sendo feita a usuários de CFW pela Nintendo. Para se proteger, por favor siga os seguintes passos antes de iniciar este guia:
+There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
-1. Vá para Configuração do console, depois "Configuração de internet", depois "SpotPass" e depois em "Envio de informações do console"
-1. Desabilite a opção "Envio de informações do console"
-1. Saia da Configuração do console
+1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
+1. Disable the "Sending of System Information" option
+1. Exit the System Settings
1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
+ If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Desabilite a opção "Mostrar o que está jogando"
+1. Disable the "Show friends what you're playing" option
1. Exit your Friend List
{% endcapture %}
diff --git a/_pages/pt_BR/bannerbomb3.txt b/_pages/pt_BR/bannerbomb3.txt
index f09755a02e..aedc09eb09 100644
--- a/_pages/pt_BR/bannerbomb3.txt
+++ b/_pages/pt_BR/bannerbomb3.txt
@@ -4,7 +4,7 @@ title: "BannerBomb3"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
diff --git a/_pages/pt_BR/cart-update.txt b/_pages/pt_BR/cart-update.txt
index 793ebbf46a..e83f6fdeba 100644
--- a/_pages/pt_BR/cart-update.txt
+++ b/_pages/pt_BR/cart-update.txt
@@ -4,7 +4,7 @@ title: "Cartridge Update"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
All game cartridges contain a copy of the required system version to play it, allowing anyone on a lower version to use the cartridge to update to that version (even without an internet connection).
diff --git a/_pages/pt_BR/ctrtransfer.txt b/_pages/pt_BR/ctrtransfer.txt
index 3ce5f773fb..3dd04e682c 100644
--- a/_pages/pt_BR/ctrtransfer.txt
+++ b/_pages/pt_BR/ctrtransfer.txt
@@ -4,7 +4,7 @@ title: "CTRTransfer"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
This is add-on section for installing an 11.5.0 CTRTransfer image to your device.
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(Se seu dispositivo não é de uma dessas regiões, escolha uma que seja do tipo do seu dispositivo)*:
diff --git a/_pages/pt_BR/dsidumper.txt b/_pages/pt_BR/dsidumper.txt
index 56ff71f1fc..e45c98aa13 100644
--- a/_pages/pt_BR/dsidumper.txt
+++ b/_pages/pt_BR/dsidumper.txt
@@ -4,7 +4,7 @@ title: "DSiDumper"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
To dump system DSiWare, we use an existing homebrew launcher exploit.
diff --git a/_pages/pt_BR/f3-(linux).txt b/_pages/pt_BR/f3-(linux).txt
index 3a9be84a0c..afda587017 100644
--- a/_pages/pt_BR/f3-(linux).txt
+++ b/_pages/pt_BR/f3-(linux).txt
@@ -4,7 +4,7 @@ title: "F3 (Linux)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Esta é uma seção adicional para verificar erros no seu cartão SD usando F3.
diff --git a/_pages/pt_BR/f3x-(mac).txt b/_pages/pt_BR/f3x-(mac).txt
index 1e33992d60..6565d0ef7e 100644
--- a/_pages/pt_BR/f3x-(mac).txt
+++ b/_pages/pt_BR/f3x-(mac).txt
@@ -4,7 +4,7 @@ title: "F3X (Mac)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Esta é uma seção adicional para verificar erros no seu cartão SD usando F3X.
diff --git a/_pages/pt_BR/file-extensions-(windows).txt b/_pages/pt_BR/file-extensions-(windows).txt
index 9ca22aca8e..2a37f2b9f1 100644
--- a/_pages/pt_BR/file-extensions-(windows).txt
+++ b/_pages/pt_BR/file-extensions-(windows).txt
@@ -4,7 +4,7 @@ title: "Extensões de Arquivos (Windows)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Esta é uma seção adicional para desabilitar o comportamento padrão do Windows de esconder as extensões dos arquivos.
diff --git a/_pages/pt_BR/finalizing-setup.txt b/_pages/pt_BR/finalizing-setup.txt
index 2352adbf0f..01dcba02e9 100644
--- a/_pages/pt_BR/finalizing-setup.txt
+++ b/_pages/pt_BR/finalizing-setup.txt
@@ -4,7 +4,7 @@ title: "Finalizando a instalação"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
O arquivo `boot.firm` é o que é executado pelo boot9strap depois que ele acaba de carregar a NAND, e ele pode ser qualquer payload arm9 válido no formato FIRM. Este arquivo pode ser substituído a qualquer momento, embora o Luma3DS permita a inicialização de outros payloads arm9 no formato FIRM usando o chainloader do Luma3DS.
@@ -26,7 +26,7 @@ Durante este processo, também configuramos alguns programas como os seguintes:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt b/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt
index 0ae15c228b..7449ad24c3 100644
--- a/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/pt_BR/flashing-ntrboot-(3ds-multi-system).txt
@@ -4,7 +4,7 @@ title: "Flashing ntrboot (3DS Multi System)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Antes de prosseguir, certifique-se de que você tenha lido todas as informações em [ntrboot](ntrboot)
diff --git a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt
index f1f973666f..188172bbfb 100644
--- a/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/pt_BR/flashing-ntrboot-(3ds-single-system).txt
@@ -4,7 +4,7 @@ title: "Flashing ntrboot (3DS Single System)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Antes de prosseguir, certifique-se de que você tenha lido todas as informações em [ntrboot](ntrboot)
diff --git a/_pages/pt_BR/flashing-ntrboot-(dsi).txt b/_pages/pt_BR/flashing-ntrboot-(dsi).txt
index 5d1b60efac..de45a98a62 100644
--- a/_pages/pt_BR/flashing-ntrboot-(dsi).txt
+++ b/_pages/pt_BR/flashing-ntrboot-(dsi).txt
@@ -4,7 +4,7 @@ title: "Flashing ntrboot (DSi)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Antes de prosseguir, certifique-se de que você tenha lido todas as informações em [ntrboot](ntrboot)
diff --git a/_pages/pt_BR/flashing-ntrboot-(nds).txt b/_pages/pt_BR/flashing-ntrboot-(nds).txt
index 4b630867cb..8cfc3b6402 100644
--- a/_pages/pt_BR/flashing-ntrboot-(nds).txt
+++ b/_pages/pt_BR/flashing-ntrboot-(nds).txt
@@ -4,7 +4,7 @@ title: "Flashing ntrboot (NDS)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Antes de prosseguir, certifique-se de que você tenha lido todas as informações em [ntrboot](ntrboot)
diff --git a/_pages/pt_BR/get-started.txt b/_pages/pt_BR/get-started.txt
index a0bed03512..ca978a2a14 100644
--- a/_pages/pt_BR/get-started.txt
+++ b/_pages/pt_BR/get-started.txt
@@ -4,14 +4,10 @@ title: "Começar"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Selecione a página correspondente à sua versão na tabela abaixo. Note que os campos "de" e "para" são inclusivos. Isso significa que, por exemplo, a linha "de 9.0.0 para 9.2.0" inclui o 9.0.0, 9.1.0 e 9.2.0.
-Além disso, observe que as duas últimas colunas do gráfico referem-se ao último número de sua versão (que corresponde à versão do navegador instalada no sistema). Se a versão for -0, então você não tem um navegador, enquanto que qualquer número acima de -0 indica que um navegador está instalado.
-
-No caso da versão "5.0.0-0U" por exemplo, você seguiria a coluna "Sem Navegador" e a linha 5.0.0 a 5.1.0 porque o sistema está na versão do sistema nesse intervalo e não possui navegador instalado.
-
A versão do seu dispositivo pode ser encontrada no canto inferior direito da tela superior na Confirguração do Console.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Antes de iniciar, você pode querer verificar se o seu cartão SD possui erros u
{: .notice--warning}
{% capture notice-1 %}
-Há relatos de uma onda de bans sendo feita a usuários de CFW pela Nintendo. Para se proteger, por favor siga os seguintes passos antes de iniciar este guia:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Vá para Configuração do console, depois "Configuração de internet", depois "SpotPass" e depois em "Envio de informações do console"
-1. Desabilite a opção "Envio de informações do console"
-1. Saia da Configuração do console
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Desabilite a opção "Mostrar o que está jogando"
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ Há relatos de uma onda de bans sendo feita a usuários de CFW pela Nintendo. Pa
| De |
Para |
- Sem Navegador |
- Com Navegador |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
TODAS AS VERSÕES
|
- ntrboot
(Requer um flashcart compatível) or Instalando boot9strap (Hardmod)
(Requer soldagem) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/pt_BR/godmode9-usage.txt b/_pages/pt_BR/godmode9-usage.txt
index 7c54cd4779..dbd1be6103 100644
--- a/_pages/pt_BR/godmode9-usage.txt
+++ b/_pages/pt_BR/godmode9-usage.txt
@@ -7,7 +7,7 @@ title: "Utilização do GodMode9"
For support (in English) with GodMode9, as well as help with scripting and to get updates and info, join [GodMode9 on Discord](https://discord.gg/EGu6Qxw).
{: .notice--primary}
-### Leitura Obrigatória
+### Required Reading
GodMode9 is a full access file browser for the Nintendo 3DS console, giving you access to your SD card, the FAT partitions inside your SysNAND and EmuNAND, and basically anything else. Among other functionality, you can copy, delete, rename files, and create folders.
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/pt_BR/h2testw-(windows).txt b/_pages/pt_BR/h2testw-(windows).txt
index 2907c50085..2a2e004141 100644
--- a/_pages/pt_BR/h2testw-(windows).txt
+++ b/_pages/pt_BR/h2testw-(windows).txt
@@ -4,7 +4,7 @@ title: "H2testw (Windows)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Esta é uma seção adicional para verificar erros no seu cartão SD usando h2testw.
diff --git a/_pages/pt_BR/home.txt b/_pages/pt_BR/home.txt
index 37c0a49c7c..becdc419e6 100644
--- a/_pages/pt_BR/home.txt
+++ b/_pages/pt_BR/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ Se tudo ocorrer conforme o esperado, você não perderá dados pessoais e continuará com tudo o que tinha antes de começar (jogos, NNID, saves, etc serão preservados).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ O seu cartão SD deve ser [MBR, e não GPT](http://adrenaline.uol.com.br/forum/threads/tutorial-convertendo-mbr-gpt-e-gpt-mbr.461966/) (o cartão SD que vem com o seu dispositivo é, por padrão, MBR).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ O seu cartão SD deve ser [MBR, e não GPT](http://adrenaline.uol.com.br/forum/threads/tutorial-convertendo-mbr-gpt-e-gpt-mbr.461966/) (o cartão SD que vem com o seu dispositivo é, por padrão, MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/pt_BR/homebrew-launcher-(alternatives).txt b/_pages/pt_BR/homebrew-launcher-(alternatives).txt
index e62f63109b..c31df6fa03 100644
--- a/_pages/pt_BR/homebrew-launcher-(alternatives).txt
+++ b/_pages/pt_BR/homebrew-launcher-(alternatives).txt
@@ -4,7 +4,7 @@ title: "Homebrew Launcher (Alternativas)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
This udsploit/safehax exploit is compatible with versions 9.0.0 through 11.3.0.
diff --git a/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt b/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/pt_BR/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/pt_BR/homebrew-launcher-(pichaxx).txt b/_pages/pt_BR/homebrew-launcher-(pichaxx).txt
index 2dceab4fff..8a30234d3f 100644
--- a/_pages/pt_BR/homebrew-launcher-(pichaxx).txt
+++ b/_pages/pt_BR/homebrew-launcher-(pichaxx).txt
@@ -4,7 +4,7 @@ title: "Homebrew Launcher (PicHaxx)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the PicHaxx exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Pokemon Picross" game from the eShop.
diff --git a/_pages/pt_BR/homebrew-launcher-(soundhax).txt b/_pages/pt_BR/homebrew-launcher-(soundhax).txt
index 4a3edac3c1..8a3fca2b67 100644
--- a/_pages/pt_BR/homebrew-launcher-(soundhax).txt
+++ b/_pages/pt_BR/homebrew-launcher-(soundhax).txt
@@ -4,7 +4,7 @@ title: "Homebrew Launcher (Soundhax)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
O Homebrew Launcher possui vários pontos de entrada diferentes, ou métodos de execução.
diff --git a/_pages/pt_BR/homebrew-launcher-(steelhax).txt b/_pages/pt_BR/homebrew-launcher-(steelhax).txt
index e463ae6388..d72fde0bc8 100644
--- a/_pages/pt_BR/homebrew-launcher-(steelhax).txt
+++ b/_pages/pt_BR/homebrew-launcher-(steelhax).txt
@@ -4,7 +4,7 @@ title: "Homebrew Launcher (Steelhax)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to gain access to the Homebrew Launcher using the Steelhax exploit for the purposes of injecting an exploitable DSiWare title into the DS Download Play application. This method requires you to already own (or download) the free "Steel Diver: Sub Wars" game from the eShop.
diff --git a/_pages/pt_BR/installing-boot9strap-(fredtool).txt b/_pages/pt_BR/installing-boot9strap-(fredtool).txt
index ae59177d51..ed14c72553 100644
--- a/_pages/pt_BR/installing-boot9strap-(fredtool).txt
+++ b/_pages/pt_BR/installing-boot9strap-(fredtool).txt
@@ -4,7 +4,7 @@ title: "Installing Boot9strap (Fredtool)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
This method of using Seedminer for further exploitation uses your `movable.sed` file to decrypt any DSiWare title for the purposes of injecting an exploitable DSiWare title into the DS Internet Settings application. This requires you to have a DSiWare backup, for example from BannerBomb or the DSiWare Dumper tool.
diff --git a/_pages/pt_BR/installing-boot9strap-(frogtool).txt b/_pages/pt_BR/installing-boot9strap-(frogtool).txt
index 5759d78b65..b4fca569e7 100644
--- a/_pages/pt_BR/installing-boot9strap-(frogtool).txt
+++ b/_pages/pt_BR/installing-boot9strap-(frogtool).txt
@@ -4,7 +4,7 @@ title: "Installing Boot9strap (Frogtool)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
We will now use our Homebrew Launcher access to run the Frogtool utility in order to inject the exploitable Japanese version of the "Flipnote Studio" title, which we then use to run b9sTool and install boot9strap.
diff --git a/_pages/pt_BR/installing-boot9strap-(hardmod).txt b/_pages/pt_BR/installing-boot9strap-(hardmod).txt
index 3689ebaf2a..fdbc4acf7f 100644
--- a/_pages/pt_BR/installing-boot9strap-(hardmod).txt
+++ b/_pages/pt_BR/installing-boot9strap-(hardmod).txt
@@ -4,7 +4,7 @@ title: "Instalando boot9strap (Hardmod)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Um excelente guia para realizar um hardmod pode ser encontrado [aqui](https://gbatemp.net/threads/414498/).
diff --git a/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..cc9d7966fd
--- /dev/null
+++ b/_pages/pt_BR/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use o botão (A) e os botões direcionais para ativar o seguinte:
+ + **"Show NAND or user string in System Settings"**
+1. Aperte (Start) para salvar e reiniciar
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Inicie o aplicativo Download Play
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Selecione "Miscellaneous options"
+1. Selecione "Switch the hb. title to the current app."
+1. Aperte (B) para continuar
+1. Aperte (B) para retornar para o menu principal do Rosalina
+1. Aperte (B) para sair do menu do Rosalina
+1. Aperte (Home), depois feche o Download Play
+1. Relaunch the Download Play application
+1. Seu dispositivo deve abrir o Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
index ff6c2d17f7..ac9ad52a81 100644
--- a/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
+++ b/_pages/pt_BR/installing-boot9strap-(ntrboot).txt
@@ -4,7 +4,7 @@ title: "Instalando boot9strap (ntrboot)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
To use the [magnet](https://wikipedia.org/wiki/Magnet_URI_scheme) links on this page, you will need a torrent client like [Deluge](http://dev.deluge-torrent.org/wiki/Download).
diff --git a/_pages/pt_BR/installing-boot9strap-(soundhax).txt b/_pages/pt_BR/installing-boot9strap-(soundhax).txt
index bd46d5d59a..a15ba915cd 100644
--- a/_pages/pt_BR/installing-boot9strap-(soundhax).txt
+++ b/_pages/pt_BR/installing-boot9strap-(soundhax).txt
@@ -4,7 +4,7 @@ title: "Installing boot9strap (Soundhax)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Soundhax (when combined with pre9otherapp) is compatible with versions 2.1.0 through 8.1.0 in the EUR, JPN, KOR, and USA regions.
diff --git a/_pages/pt_BR/installing-boot9strap-(usm).txt b/_pages/pt_BR/installing-boot9strap-(usm).txt
index 7166916518..3a7e163276 100644
--- a/_pages/pt_BR/installing-boot9strap-(usm).txt
+++ b/_pages/pt_BR/installing-boot9strap-(usm).txt
@@ -4,7 +4,7 @@ title: "Installing boot9strap (USM)"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/pt_BR/legacy-methods.txt b/_pages/pt_BR/legacy-methods.txt
index b963fa4f32..4c5aa95012 100644
--- a/_pages/pt_BR/legacy-methods.txt
+++ b/_pages/pt_BR/legacy-methods.txt
@@ -4,11 +4,11 @@ title: "Legacy Methods"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/pt_BR/move-emunand.txt b/_pages/pt_BR/move-emunand.txt
index cd70577446..581be56f0e 100644
--- a/_pages/pt_BR/move-emunand.txt
+++ b/_pages/pt_BR/move-emunand.txt
@@ -4,7 +4,7 @@ title: "Mover EmuNAND"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Esta é uma seção adicional, na qual moveremos o conteúdo de uma EmuNAND anterior para o seu novo CFW na SysNAND. Depois, removeremos a antiga partição da EmuNAND. Note que os termos EmuNAND e RedNAND se referem a implementações ligeiramente diferentes do [mesmo conceito](http://3dbrew.org/wiki/NAND_Redirection).
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* Uma EmuNAND já existente
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/pt_BR/ntrboot.txt b/_pages/pt_BR/ntrboot.txt
index 4be2def302..7d03cc46ec 100644
--- a/_pages/pt_BR/ntrboot.txt
+++ b/_pages/pt_BR/ntrboot.txt
@@ -7,7 +7,7 @@ title: "ntrboot"
If your flashcart comes pre-flashed with ntrboot (or you have already flashed ntrboot to your flashcart), you can skip to [Installing boot9strap (ntrboot)](installing-boot9strap-(ntrboot)) for instructions on how to use it.
{: .notice--success}
-### Leitura Obrigatória
+### Required Reading
Installing boot9strap with ntrboot requires a compatible NDS / DSi flashcart to flash ntrboot to. Note that some of these flashcarts are sold pre-flashed with ntrboot.
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/pt_BR/region-changing.txt b/_pages/pt_BR/region-changing.txt
index f21fbbf01e..e004d0f682 100644
--- a/_pages/pt_BR/region-changing.txt
+++ b/_pages/pt_BR/region-changing.txt
@@ -4,7 +4,7 @@ title: "Mudança de Região"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Esta é a seção de adicional para a mudar a região da sua SysNAND CFW. This is done by installing the 11.5.0 CTRTransfer image for the region you want to switch to.
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/pt_BR/seedminer.txt b/_pages/pt_BR/seedminer.txt
index 3b357bd4ab..89086f2b7b 100644
--- a/_pages/pt_BR/seedminer.txt
+++ b/_pages/pt_BR/seedminer.txt
@@ -4,7 +4,7 @@ title: "Seedminer"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
To install boot9strap on your device, we exploit an oversight in the security restrictions applied to "DSiWare" applications.
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Insira o cartão SD no seu computador
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/pt_BR/site-navigation.txt b/_pages/pt_BR/site-navigation.txt
index 27ea37c1eb..eae2c0c10c 100644
--- a/_pages/pt_BR/site-navigation.txt
+++ b/_pages/pt_BR/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizando a instalação](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Mover EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Mudança de Região](region-changing)
diff --git a/_pages/pt_BR/troubleshooting.txt b/_pages/pt_BR/troubleshooting.txt
index 7ee4fd6d2d..94b683c34a 100644
--- a/_pages/pt_BR/troubleshooting.txt
+++ b/_pages/pt_BR/troubleshooting.txt
@@ -4,7 +4,7 @@ title: "Troubleshooting"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
If you are unable to boot your device, please look for the section relevant to you and follow the instructions.
diff --git a/_pages/pt_BR/uninstall-cfw.txt b/_pages/pt_BR/uninstall-cfw.txt
index a16c28e8da..d50f7cdd72 100644
--- a/_pages/pt_BR/uninstall-cfw.txt
+++ b/_pages/pt_BR/uninstall-cfw.txt
@@ -4,7 +4,7 @@ title: "Desinstalar o CFW"
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Isso irá remover completamente o CFW do seu dispositivo, incluindo o Boot9Strap e Luma3DS, com o propósito de restaurar o dispositivo ao padrão.
@@ -22,7 +22,7 @@ Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` n
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note que se você tem outros arquivos de payload diferentes do `GodMode9.firm` n
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/pt_BR/updating-b9s.txt b/_pages/pt_BR/updating-b9s.txt
index 563066df6a..8fc889cf63 100644
--- a/_pages/pt_BR/updating-b9s.txt
+++ b/_pages/pt_BR/updating-b9s.txt
@@ -4,20 +4,20 @@ title: "Atualizando B9S" #
{% include toc title="Table of Contents" %}
-### Leitura Obrigatória
+### Required Reading
Esta página é para usuários do boot9strap atualizarem a instalação do boot9strap para a versão mais recente.
{% capture notice-1 %}
-Há relatos de uma onda de bans sendo feita a usuários de CFW pela Nintendo. Para se proteger, por favor siga os seguintes passos antes de iniciar este guia:
+There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
-1. Vá para Configuração do console, depois "Configuração de internet", depois "SpotPass" e depois em "Envio de informações do console"
-1. Desabilite a opção "Envio de informações do console"
-1. Saia da Configuração do console
+1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
+1. Disable the "Sending of System Information" option
+1. Exit the System Settings
1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
+ If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Desabilite a opção "Mostrar o que está jogando"
+1. Disable the "Show friends what you're playing" option
1. Exit your Friend List
{% endcapture %}
diff --git a/_pages/pt_PT/ctrtransfer.txt b/_pages/pt_PT/ctrtransfer.txt
index 380d3abbe1..fcf052ccfc 100644
--- a/_pages/pt_PT/ctrtransfer.txt
+++ b/_pages/pt_PT/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(se a tua consola não for de nenhuma destas regiões, escolhe um ficheiro que seja para o teu tipo de consola)*:
diff --git a/_pages/pt_PT/finalizing-setup.txt b/_pages/pt_PT/finalizing-setup.txt
index 73097ef169..3caf2d1af0 100644
--- a/_pages/pt_PT/finalizing-setup.txt
+++ b/_pages/pt_PT/finalizing-setup.txt
@@ -26,7 +26,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/pt_PT/get-started.txt b/_pages/pt_PT/get-started.txt
index ad058a450c..e47090de3d 100644
--- a/_pages/pt_PT/get-started.txt
+++ b/_pages/pt_PT/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Antes de começar, pode ser boa ideia verificar se o teu cartão SD tem erros, c
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| From |
Até |
- No Browser |
- Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/pt_PT/godmode9-usage.txt b/_pages/pt_PT/godmode9-usage.txt
index beaa33b92d..d54640094c 100644
--- a/_pages/pt_PT/godmode9-usage.txt
+++ b/_pages/pt_PT/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/pt_PT/home.txt b/_pages/pt_PT/home.txt
index 5cec176a0f..5ac07fce5d 100644
--- a/_pages/pt_PT/home.txt
+++ b/_pages/pt_PT/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt b/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..be66ae76a3
--- /dev/null
+++ b/_pages/pt_PT/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Leitura Obrigatória
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..7347115728
--- /dev/null
+++ b/_pages/pt_PT/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Leitura Obrigatória
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/pt_PT/installing-boot9strap-(usm).txt b/_pages/pt_PT/installing-boot9strap-(usm).txt
index 4edfbb2ce2..87985f0d37 100644
--- a/_pages/pt_PT/installing-boot9strap-(usm).txt
+++ b/_pages/pt_PT/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/pt_PT/legacy-methods.txt b/_pages/pt_PT/legacy-methods.txt
index b963fa4f32..c744fc3224 100644
--- a/_pages/pt_PT/legacy-methods.txt
+++ b/_pages/pt_PT/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/pt_PT/move-emunand.txt b/_pages/pt_PT/move-emunand.txt
index 048b93eda6..624a1e6574 100644
--- a/_pages/pt_PT/move-emunand.txt
+++ b/_pages/pt_PT/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/pt_PT/ntrboot.txt b/_pages/pt_PT/ntrboot.txt
index 874c8300af..d2d4c2a685 100644
--- a/_pages/pt_PT/ntrboot.txt
+++ b/_pages/pt_PT/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/pt_PT/region-changing.txt b/_pages/pt_PT/region-changing.txt
index 39ce63a41b..e2c02088a1 100644
--- a/_pages/pt_PT/region-changing.txt
+++ b/_pages/pt_PT/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/pt_PT/seedminer.txt b/_pages/pt_PT/seedminer.txt
index 10aa6a18ac..7a4472edbb 100644
--- a/_pages/pt_PT/seedminer.txt
+++ b/_pages/pt_PT/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Insert your SD card into your computer
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/pt_PT/site-navigation.txt b/_pages/pt_PT/site-navigation.txt
index 2760ad413a..439398c382 100644
--- a/_pages/pt_PT/site-navigation.txt
+++ b/_pages/pt_PT/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changing](region-changing)
diff --git a/_pages/pt_PT/uninstall-cfw.txt b/_pages/pt_PT/uninstall-cfw.txt
index 8f21eae451..62c319ef9a 100644
--- a/_pages/pt_PT/uninstall-cfw.txt
+++ b/_pages/pt_PT/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/ro_RO/ctrtransfer.txt b/_pages/ro_RO/ctrtransfer.txt
index da1a0726cb..ddb707d27a 100644
--- a/_pages/ro_RO/ctrtransfer.txt
+++ b/_pages/ro_RO/ctrtransfer.txt
@@ -17,7 +17,7 @@ TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi.
### Ce aveți nevoie
-* Cea mai nouă versiune de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Cea mai nouă versiune de [FBI](https://github.com/Steveice10/FBI/releases/) *(fișierul `.3dsx`)*
* Imaginea CTRTransfer 11.5.0 pentru dispozitivul și regiunea dumneavoastră
*(dacă dispozitivul dumneavoastră nu e din una din aceste regiuni, doar alegeți una ce se potrivește cu tipul dumneavoastră de dispozitiv)*:
diff --git a/_pages/ro_RO/finalizing-setup.txt b/_pages/ro_RO/finalizing-setup.txt
index a3616df6e2..df527b108a 100644
--- a/_pages/ro_RO/finalizing-setup.txt
+++ b/_pages/ro_RO/finalizing-setup.txt
@@ -26,7 +26,7 @@ Pe parcursul acestui proces, vom instala și programe ca următoarele:
* Ultima versiune de [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(fișierul `.cia`)*
* Ultima versiune de [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(fișierul `.cia`)*
* Cea mai nouă versiune de [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* Cea mai nouă versiune de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Cea mai nouă versiune de [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* Cea mai nouă versiune de [FBI](https://github.com/Steveice10/FBI/releases/) *(fișierele `.3dsx` și `.cia`)*
* Cea mai recentă versiune [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/ro_RO/get-started.txt b/_pages/ro_RO/get-started.txt
index bafe04d7f2..f5e2f3acf7 100644
--- a/_pages/ro_RO/get-started.txt
+++ b/_pages/ro_RO/get-started.txt
@@ -8,10 +8,6 @@ title: "Începeți"
Alegeți pagina corespunzătore versiunii dumneavoastră din tabelul de mai jos. Țineți cont cum câmpurile "de la" și "până la" sunt inclusiv. Asta înseamnă că, de exemplu, rândul "de la 9.0.0 până la 9.2.0" cuprinde 9.0.0, 9.1.0, și 9.2.0.
-În plus, țineţi cont că ultimele două coloane ale tabelului se referă la ultimul număr al versiunii (care corespunde versiunii browserului instalat pe dispozitiv). Dacă versiunea este -0 atunci nu aveți un browser, în timp ce orice alt număr mai mare decât -0 arată că aveți browser instalat.
-
-În cazul versiunii "5.0.0-0U" de exemplu, urmăriți coloana "Fără Browser" și rândul 5.0.0 până la 5.1.0 din cauza că sistemul este pe o versiune din acel interval și nu are browserul instalat.
-
Versiunea dispozitvului poate fi găsit în colțul din dreapta jos al ecranului superior din System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Această pagină este pentru instrucţiuni despre cum să instalaţi boot9strap
{: .notice--warning}
{% capture notice-1 %}
-Au existat rapoarte de un val de banuri adresate utilizatorilor de CFW de către Nintendo. Pentru a vă proteja, efectuaţi următorii paşi înainte de a începe acest ghid:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Mergeți în System Settings, apoi "Internet Settings", apoi "SpotPass", apoi "Sending of System Information"
-1. Dezactivați opţiunea "Sending of System Information"
-1. Ieșiți din System Settings
-1. Mergeți în Lista de prieteni ([iconița cu fața portocalie]({{ "/images/friend-list-icon.png" | absolute_url }} în rândul superior de pe meniul HOME)
- + Dacă primiți o eroare și sunteți dat afară din meniu, setarea Listei de prieteni este dezactivată sau consola nu se mai poate conecta în serverele Nintendo (din cauza unui ban sau problemelor de conexiune)
-1. Mergeți la setările de pe Lista de prieteni, apoi "Friend Notification Settings", apoi "Show friends what you're playing"
-1. Dezactivați opțiunea "Show friends what you're playing"
-1. Ieșiți din Lista de prieteni
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ Au existat rapoarte de un val de banuri adresate utilizatorilor de CFW de către
| De la |
Până la |
- Fără Browser |
- Cu Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Actualizați la ultima versiune sau folosiți o metodă pentru "Toate versiunile" |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Instalând boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Actualizați la ultima versiune sau folosiți o metodă pentru "Toate versiunile" |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
TOATE VERSIUNILE
|
- ntrboot
(Necesită un flashcart compatibil) sau Instalând boot9strap (Hardmod)
(Necesită sudură) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/ro_RO/godmode9-usage.txt b/_pages/ro_RO/godmode9-usage.txt
index 8b85d9d9c0..a91adfcdd3 100644
--- a/_pages/ro_RO/godmode9-usage.txt
+++ b/_pages/ro_RO/godmode9-usage.txt
@@ -22,7 +22,7 @@ Unele dintre instrucțiunile de mai jos se aplică doar la ultima versiune de Go
### Ce aveți nevoie
-* Cea mai nouă versiune de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instrucțiuni
diff --git a/_pages/ro_RO/home.txt b/_pages/ro_RO/home.txt
index 66f5fe6124..04a6e5c532 100644
--- a/_pages/ro_RO/home.txt
+++ b/_pages/ro_RO/home.txt
@@ -81,8 +81,8 @@ Pentru o listă cu fiecare dintre semnăturile calculate de sighax, vedeți [ace
+ Acest ghid va merge pe New 3DS, Old 3DS, și 2DS în toate regiunile cu firmware 11.13.0 sau inferior.
+ Dacă totul merge așa cum trebuie, nu o să pierdeți nimic și o să ajungeți să aveți toate lucrurile cu care ați început (jocurile, NNID, salvările, etc. vor fi păstrate).
+ Țineți dispozitivul conectat și încărcat pe toată durata procedeului pentru a evita pierderea de date sau daune de la o închidere neașteptată!
-+ Cardul SD ar trebui să fie [MBR, nu GPT](http://www.howtogeek.com/245610/) (cardul SD care vine cu dispozitivul va fi MBR).
-+ Dacă aveți nevoie să formatați un card SD nou, puteți să folosiți [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) și să setați Dimensiunea Unității de Alocare la 32K(32768).
++ Cardul SD ar trebui să fie [MBR, nu GPT](http://www.howtogeek.com/245610/) (cardul SD care vine cu dispozitivul va fi MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ Old 2DS este, în esenţă, identic cu Old 3DS în ceea ce priveşte software-ul, în timp ce New 2DS este identic cu New 3DS în ceea ce priveşte software-ul. Orice pas care spune "Old 3DS" se aplică de asemenea la Old 2DS, şi orice pas care spune "New 3DS" se aplică de asemenea la New 2DS.
___
diff --git a/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt b/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..dadf542b60
--- /dev/null
+++ b/_pages/ro_RO/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Cuprins" %}
+
+### Lectură obligatorie
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+Aceste instrucțiuni funcționează pe consolele din regiunea SUA, Europa, Japonia și Coreea, indicate de literele U, E, J, sau K după versiunea de sistem. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### Ce aveți nevoie
+
+* Cea mai nouă versiune de [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instrucțiuni
+
+#### Secțiunea I - Preparații
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Așteptați până când procesul este terminat
+ + If it displays a yellow screen, power your console off, then try this section again
+ + Dacă primiți o eroare, [urmați acest ghid de depanare](troubleshooting#a-browser-based-exploit-is-not-working)
+1. În cazul în care exploit-ul a mers, dispozitivul va încărca Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..10b34cca43
--- /dev/null
+++ b/_pages/ro_RO/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Cuprins" %}
+
+### Lectură obligatorie
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### Ce aveți nevoie
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Secțiunea I - Preparații
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copiați `boot.firm` de la Luma3DS `.zip` pe rădăcina cardului SD
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Secțiunea III - Configurând Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Folosiți butonul (A) si D-Pad-ul ca să activați următoarele:
+ + **"Show NAND or user string in System Settings"**
+1. Apăsați (Start) pentru a salva și reporni
+ + Dispozitivul ar trebui să încarce meniul HOME după o scurtă vreme. Dacă vedeți un ecran negru mai mult de 5 secunde, [urmați acest ghid de depanare](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Lansați aplicația Download Play
+1. Așteptați până când vedeți două butoane
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Selectați "Miscellaneous options"
+1. Selectați "Switch the hb. title to the current app"
+1. Apăsați (B) pentru a continua
+1. Apăsați (B) ca să vă întoarceți la meniul principal Rosalina
+1. Apăsați (B) pentru a ieși din meniul Rosalina
+1. Apăsați (Home), apoi închideți Download Play
+1. Relaunch the Download Play application
+1. Dispozitivul dumneavoastră ar trebui să încarce Hombrew Launcher-ul
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continuați la [Finalizând instalarea](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ro_RO/installing-boot9strap-(usm).txt b/_pages/ro_RO/installing-boot9strap-(usm).txt
index 760a085b4f..d0f1a3ec17 100644
--- a/_pages/ro_RO/installing-boot9strap-(usm).txt
+++ b/_pages/ro_RO/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Secțiunea I - Preparații
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Încărcați fișierul movable.sed folosind opțiunea "Choose File"
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/ro_RO/legacy-methods.txt b/_pages/ro_RO/legacy-methods.txt
index 20af797c13..f02a6478e7 100644
--- a/_pages/ro_RO/legacy-methods.txt
+++ b/_pages/ro_RO/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/ro_RO/move-emunand.txt b/_pages/ro_RO/move-emunand.txt
index dacce763c7..d749bfad40 100644
--- a/_pages/ro_RO/move-emunand.txt
+++ b/_pages/ro_RO/move-emunand.txt
@@ -16,7 +16,7 @@ TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi.
### Ce aveți nevoie
* Un EmuNAND existent
-* Cea mai nouă versiune de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Cea mai nouă versiune de [FBI](https://github.com/Steveice10/FBI/releases/)
### Instrucțiuni
diff --git a/_pages/ro_RO/ntrboot.txt b/_pages/ro_RO/ntrboot.txt
index 0edbeb18c6..b10d7f4e4a 100644
--- a/_pages/ro_RO/ntrboot.txt
+++ b/_pages/ro_RO/ntrboot.txt
@@ -17,23 +17,23 @@ Deși exploit-ul ntrboot merge indiferent de versiunea de sistem, ntrboot flashe
| Nume de Flashcart | Preţul Curent | Are "Bombă cu Ceas"? | Versiuni de 3DS? | Versiuni de DSi? | Alte note |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | **Vine cu ntrboot preinstalat**; se poate schimba înapoi spre un flashcart de NDS obișnuit. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | Nu | <= 11.13.0 | <= 1.4.5 | **Vine cu ntrboot preinstalat** ([are un întrerupător intern pentru a comuta între modurile ntrboot și NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); nu instalați ntrboot manual. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | Nu | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | Nu | <= 11.13.0 | <= 1.4.5 | Toate reviziile de RTS sunt compatibile. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | Toate flashcart-urile R4iSDHC 20XX sunt identice. modelele 2013 sunt incompatibile. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | Toate flashcart-urile R4iSDHC 20XX sunt identice. modelele 2013 sunt incompatibile. |
-| **Ace3DS X** | | Nu | <= 11.13.0 | <= 1.4.5 | **Vine cu ntrboot preinstalat** (are un întrerupător extern pentru a comuta între modurile ntrboot ("3DS") și NDS); nu instalați ntrboot manual. |
-| **Ace3DS Plus** || Nu | <= 11.13.0 | <= 1.4.5 ||
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. modelele 2013 sunt incompatibile. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. modelele 2013 sunt incompatibile. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | Nu | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | Nu | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | Nu | Niciuna | Niciuna | |
| **R4i Gold 3DS Deluxe "Starter"** | | Nu | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | Nu | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Necunoscut | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: 3 septembrie 2019 | <= 11.13.0 | <= 1.4.5 | Toate flashcart-urile R4iSDHC 20XX sunt identice. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ro_RO/region-changing.txt b/_pages/ro_RO/region-changing.txt
index 1fa577e90d..b09187e8ff 100644
--- a/_pages/ro_RO/region-changing.txt
+++ b/_pages/ro_RO/region-changing.txt
@@ -29,7 +29,7 @@ TREBUIE să aveți deja instalat Luma3DS şi boot9strap pentru a-l folosi.
### Ce aveți nevoie
-* Cea mai nouă versiune de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Cea mai nouă versiune de [FBI](https://github.com/Steveice10/FBI/releases/) *(fișierul `.3dsx`)*
* Imaginea de CTRTransfer 11.5.0 pentru dispozitivul și regiunea la care doriți să schimbați:
+ - [New 3DS sau 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/ro_RO/seedminer.txt b/_pages/ro_RO/seedminer.txt
index 873836aa5d..6ae851eee9 100644
--- a/_pages/ro_RO/seedminer.txt
+++ b/_pages/ro_RO/seedminer.txt
@@ -16,21 +16,7 @@ Această metodă folosește o placă video puternică pentru a realiza calculele
### Instrucțiuni
-#### Secțiunea I - Teste de compatibilitate
-
-Deși aceste teste nu sunt strict necesare pentru a efectua exploit-ul Seedminer, exploit-urile ulterioare au nevoie ca aceste teste să fie puse în funcțiune și ar fi o pierdere de timp să se pornească Seedminer fără posibilitatea de a porni alte exploit-uri.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Secțiunea II - Preparații
+#### Secțiunea I - Preparații
1. Introduceți cardul SD în calculator
1. Navigați către folderul `Nintendo 3DS` pe cardul SD
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ Dacă primiți o eroare și sunteți dat afară din meniu, va trebui să creți un nou Mii sau consola nu se mai poate conecta în serverele Nintendo (din cauza unui ban sau problemelor de conexiune)
1. Găsiți profilul de Mii, apoi găsiţi câmpul "Friend Code" de pe ecranul superior
-#### Secțiunea III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ Acest site poate automatiza extragerea de `movable_part1.sed` (folosind un bot care simulează un 3DS) şi descifrarea criptării DSiWare a dispozitivului (folosind calculatorul unui voluntar pentru a rula Seedminer)
- + În cazul în care sistemul automatizat este nefuncțional, alăturați-vă la [Nintendo Homebrew pe Discord](https://discord.gg/MWxPgEp) şi cereți (în engleză) pentru ca cineva de acolo să vă asiste
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Introduceți Friend Code-ul dispozitivului (cu fără spaţii sau liniuţe) în câmpul "Your friend code"
1. Lipiți numele de folder al dispozitvului de 32 de caractere în câmpul "Your ID0"
+ Nu încercați să introduceți ID0-ul de mână. Asigurați-vă că ID0-ul este introdus corect prin copierea și lipirea de unde l-ați salvat în secțiunea anterioară
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/ro_RO/site-navigation.txt b/_pages/ro_RO/site-navigation.txt
index 43fae0f8d1..e00cd1b2df 100644
--- a/_pages/ro_RO/site-navigation.txt
+++ b/_pages/ro_RO/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizând instalarea](finalizing-setup)
+ [Homebrew Launcher (SoundHax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Instalând boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Instalând boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Mutare EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Schimb de regiune](region-changing)
diff --git a/_pages/ro_RO/uninstall-cfw.txt b/_pages/ro_RO/uninstall-cfw.txt
index 3788ba1685..1bfc64017a 100644
--- a/_pages/ro_RO/uninstall-cfw.txt
+++ b/_pages/ro_RO/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Dacă ați modificat software critic sistemului (precum editarea meniului HOME,
### Ce aveți nevoie
-* Cea mai nouă versiune de [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instrucțiuni
@@ -41,12 +41,12 @@ Dacă ați modificat software critic sistemului (precum editarea meniului HOME,
+ Pe un dispozitiv din ediția "New", (X) va fi 2
+ Pe un dispozitiv din ediția "Old", (X) va fi 0
1. Selectați fișierul `.app`
-1. Selctați `NCCH Image Options`
+1. Select `NCCH image options`
1. Selectați `Mount image to drive`
1. În fereastra care apare, deschideți folderul `exefs`
1. În acest folder, selectați fișierul `.firm`
-1. Select "Firm Image Options"
-1. Selectați "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. Când vi se solicită, alegeţi să decriptați și să creați o copie
1. Ar trebui să porniți în meniul HOME normal al 3DS-ului. Dacă este așa, închideți dispozitivul și continuați spre următoarea secțiune
+ Dacă NU porniți în meniul HOME normal al 3DS-ului, continuarea acestor pași va brick-ui dispozitivul **GARANTAT**. Va trebui să vă alăturați la [Nintendo Homebrew pe Discord](https://discord.gg/MWxPgEp) şi să cereți (în engleză) ca cineva de acolo să vă asiste
diff --git a/_pages/ro_RO/updating-b9s.txt b/_pages/ro_RO/updating-b9s.txt
index fc7f2c0d01..6906765a80 100644
--- a/_pages/ro_RO/updating-b9s.txt
+++ b/_pages/ro_RO/updating-b9s.txt
@@ -9,7 +9,7 @@ title: "Actualizând B9S"
Această pagină este pentru utilizatorii de boot9strap ca să-și actualizeze instalarea către ultima versiune.
{% capture notice-1 %}
-Au existat rapoarte de un val de banuri adresate utilizatorilor de CFW de către Nintendo. Pentru a vă proteja, efectuaţi următorii paşi înainte de a începe acest ghid:
+Au existat rapoarte despre un val de banuri adresate utilizatorilor de CFW de către Nintendo. Pentru a vă proteja, efectuaţi următorii paşi înainte de a începe acest ghid:
1. Mergeți în System Settings, apoi "Internet Settings", apoi "SpotPass", apoi "Sending of System Information"
1. Dezactivați opţiunea "Sending of System Information"
diff --git a/_pages/ru_RU/ctrtransfer.txt b/_pages/ru_RU/ctrtransfer.txt
index 9b48b494b6..94c15294fb 100644
--- a/_pages/ru_RU/ctrtransfer.txt
+++ b/_pages/ru_RU/ctrtransfer.txt
@@ -17,7 +17,7 @@ title: "CTRTransfer"
### Что понадобится
-* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Свежая версия [FBI](https://github.com/Steveice10/FBI/releases/latest) *(`.3dsx-файл`)*
* Образ 11.5.0 CTRTransfer для вашего устройства и региона
*(если вашего региона нет в списке, выберите любой, подходящий типу вашего устройства)*:
diff --git a/_pages/ru_RU/finalizing-setup.txt b/_pages/ru_RU/finalizing-setup.txt
index 03e30fed1d..2590fc8a41 100644
--- a/_pages/ru_RU/finalizing-setup.txt
+++ b/_pages/ru_RU/finalizing-setup.txt
@@ -26,7 +26,7 @@ title: "Завершение установки"
* Свежая версия [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(`.cia-файл`)*
* Свежая версия [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(`.cia-файл`)*
* Свежая версия [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Свежая версия [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* Свежая версия [FBI](https://github.com/Steveice10/FBI/releases/latest) *(`.cia-файл` и `.3dsx-файл`)*
* Свежая версия [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/ru_RU/get-started.txt b/_pages/ru_RU/get-started.txt
index d56c0edd34..9a92b4d3a2 100644
--- a/_pages/ru_RU/get-started.txt
+++ b/_pages/ru_RU/get-started.txt
@@ -8,10 +8,6 @@ title: "Начало"
Выберите подходящую для вашей версии страницу из таблицы ниже. Обратите внимание, что столбцы "С" и "По" обозначают границы диапазона. Это означает, к примеру, что диапазон "с 9.0.0 по 9.2.0" включает в себя 9.0.0, 9.1.0 и 9.2.0.
-Кроме того, два последних столбца относятся к последнему числу версии прошивки вашего устройства (которая обозначает версию установленного в системе браузера). Если версия оканчивается на -0, значит, у вас отсутствует браузер, любое другое число больше 0 говорит о том, что браузер установлен.
-
-Например, если у вас версия прошивки "5.0.0-0E", необходимо выбрать ячейку на пересечении колонки "Без браузера" и ряда "С 5.0.0 по 5.1.0" так как версия системы находится в этом диапазоне и в системе не установлен браузер.
-
Версия программного обеспечения отображается в правом нижнем углу верхнего экрана в приложении Системные настройки (System settings).
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ title: "Начало"
{: .notice--warning}
{% capture notice-1 %}
-Сообщается о волне банов, выданных Nintendo пользователям CFW. Чтобы защитить себя, выполните следующие шаги перед началом этого руководства:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Откройте Системные настройки, затем "Интернет-настройки", затем "SpotPass", затем "Отправка информации о системе"
-1. Отключите опцию "Отправка информации о системе"
-1. Закройте Системные настройки
-1. Откройте Список друзей ([оранжевый значок в виде лица]({{ "/images/friend-list-icon.png" | absolute_url }}) на верхней строчке меню HOME)
- + Если появляется ошибка и вас не пускают в меню, значит либо нужная настройка в Списке друзей уже отключена, либо консоль не может подключиться к серверам Nintendo (по причине бана или проблем с соединением)
-1. Перейдите в настройки Списка друзей, затем "Настройки сообщений друга", затем "Показать друзьям, во что вы играете"
-1. Отключите опцию "Показать друзьям, во что вы играете"
-1. Закройте Список друзей
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ title: "Начало"
| С |
По |
- Без браузера |
- С браузером |
+ Action |
| 1.0.0 |
2.0.0 |
- Обновитесь до последней версии прошивки или используйте метод "Все версии" |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Установка boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Обновитесь до последней версии прошивки или используйте метод "Все версии" |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ВСЕ ВЕРСИИ
|
- ntrboot
(Требуется совместимый флешкартридж) или Установка boot9strap (Hardmod)
(Требуется пайка) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/ru_RU/godmode9-usage.txt b/_pages/ru_RU/godmode9-usage.txt
index 036138f86d..38ccb86d2f 100644
--- a/_pages/ru_RU/godmode9-usage.txt
+++ b/_pages/ru_RU/godmode9-usage.txt
@@ -22,7 +22,7 @@ GodMode9 это мощный инструмент, который имеет в
### Что понадобится
-* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Инструкция
diff --git a/_pages/ru_RU/home.txt b/_pages/ru_RU/home.txt
index a783a2011d..b05e6e4478 100644
--- a/_pages/ru_RU/home.txt
+++ b/_pages/ru_RU/home.txt
@@ -81,8 +81,8 @@ Boot9strap имеет множество преимуществ перед др
+ Руководство предназначено для New 3DS, Old 3DS, New 2DS и Old 2DS любых регионов на прошивке 11.13.0 или ниже.
+ Если всё пройдет по плану, вы ничего не потеряете и всё останется в первоначальном состоянии (игры, сохранения, NNID).
+ Держите консоль подключенной к зарядному устройству на протяжении всего процесса, чтобы избежать потери данных или поломки в случае внезапного отключения консоли!
-+ SD-карта должна использовать [MBR, а не GPT](http://www.howtogeek.com/245610/) (англ.) (SD-карта, входящая в комплект, уже использует MBR).
-+ Если вам нужно отформатировать новую SD-карту, воспользуйтесь [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) и установите Allocation Unit Size на 32КБ (32768).
++ SD-карта должна использовать [MBR, а не GPT](http://www.howtogeek.com/245610/) (англ.) (SD-карта, входящая в комплект, уже использует MBR). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ Old 2DS программно в основном идентична Old 3DS, в то время как New 2DS программно в основном идентична New 3DS. Все шаги, предназначенные для "Old 3DS", также применимы к Old 2DS, а все шаги, предназначенные для "New 3DS", также применимы к New 2DS.
___
diff --git a/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt b/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..80c983d820
--- /dev/null
+++ b/_pages/ru_RU/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Содержание" %}
+
+### Обязательно к прочтению
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+Эти инструкции работают на консолях регионов USA, Europe, Japan и Korea. На регион консоли указывает буква U, E, J или K после версии прошивки. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### Что понадобится
+
+* Свежая версия [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Инструкция
+
+#### Часть I - Подготовительные работы
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Дождитесь окончания процесса
+ + If it displays a yellow screen, power your console off, then try this section again
+ + При возникновении ошибки, обратитесь к разделу [Проблемы и их решения](troubleshooting#не-работает-эксплойт-на-основе-браузера)
+1. Если эксплойт сработал корректно, запустится Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..f50d162613
--- /dev/null
+++ b/_pages/ru_RU/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Содержание" %}
+
+### Обязательно к прочтению
+
+Для того, чтобы использовать уязвимость в SAFE_MODE прошивке консоли, нам нужно внедрить модифицированный WiFi профиль.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+После того, как профиль Wi-Fi будет внедрен, мы используем SAFE_MODE, функцию восстановления, которая присутствует на всех консолях 3DS, для активации модифицированного WiFi профиля.
+
+Если кнопки (L), (R), (Вверх) или (A) не работают, вам нужно будет использовать [Устаревший метод](legacy-methods). Если вам нужна помощь в этом деле, зайдите на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) вам помочь.
+{: .notice--danger}
+
+### Что понадобится
+
+* Свежая версия [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Часть I - Подготовительные работы
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Скопируйте файл `boot.firm` из `.zip-архива` Luma3DS в корень SD-карты
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. Когда консоль все еще выключена, удерживайте следующие кнопки: (L) + (R) + (Вверх) + (A), затем нажмите кнопку питания
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Нажмите "OK" чтобы начать обновление
+ + Обновления не будет. Это часть эксплойта
+1. Нажмите "Я принимаю" чтобы принять условия
+1. В конечном итоге обновление завершится ошибкой с кодом `003-1099`. Это ожидаемое поведение
+1. При запросе "Выполнить Интернет-настройки?", выберите "Выполнить"
+1. В следующем меню перейдите в `Связь 1` -> `Изменить настройки` -> `Следующая страница (стрелка вправо)` -> `Настройки прокси` -> `Подробнее`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Как только вы увидите `B9S install SUCCESS` на верхнем экране, нажмите любую кнопку, чтобы перезагрузиться в меню настроек Luma
+
+#### Часть III - Настройка Luma3DS
+
+1. Ваша консоль должна автоматически показать меню настроек Luma
+1. Нажимая (A) выберите следующие пункты:
+ + **"Show NAND or user string in System Settings"**
+1. Нажмите (Start), чтобы сохранить настройки и перезагрузиться
+ + После короткой задержки консоль должна загрузить меню HOME. Если экран остаётся чёрным дольше 5 минут, обратитесь к разделу [Проблемы и их решения](troubleshooting#черный-экран-при-загрузке-sysnand-после-установки-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Запустите приложение Загружаемая игра
+1. Дождитесь появления двух кнопок
+ + Do not press either of the buttons
+1. Нажмите (L) + (Вниз) + (Select) одновременно чтобы открыть меню Rosalina
+1. Выберите "Miscellaneous options"
+1. Выберите "Switch the hb. title to the current app."
+1. Нажмите (B), чтобы продолжить
+1. Нажмите (B) для возврата в главное меню Rosalina
+1. Нажмите (B) для выхода из главного меню Rosalina
+1. Нажмите (Home), затем закройте приложение Загружаемая игра
+1. Relaunch the Download Play application
+1. Консоль должна загрузиться в Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Следующий шаг: [Завершение установки](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/ru_RU/installing-boot9strap-(usm).txt b/_pages/ru_RU/installing-boot9strap-(usm).txt
index c328a0af94..41f8e5278d 100644
--- a/_pages/ru_RU/installing-boot9strap-(usm).txt
+++ b/_pages/ru_RU/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ title: "Установка boot9strap (USM)"
#### Часть I - Подготовительные работы
1. Перейдите по ссылке [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) на компьютере
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Загрузите свой movable.sed, используя опцию "Выберите файл"
1. Нажмите кнопку "Download unSAFE_MODE-bb3 archive"
+ Начнется загрузка эксплойта DSiWare `F00D43D5.bin` и файла с данными для SAFE_MODE эксплойта `usm.bin` внутри zip-архива (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/ru_RU/legacy-methods.txt b/_pages/ru_RU/legacy-methods.txt
index cf8e9f5495..1e7723b482 100644
--- a/_pages/ru_RU/legacy-methods.txt
+++ b/_pages/ru_RU/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Устаревшие методы"
За последнее время было сделано несколько улучшений и усовершенствований в методах установки CFW.
-По этой причине рекомендуется использовать наиболее актуальный метод на странице [Seedminer](seedminer).
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
Однако, "legacy" или устаревшие методы хранятся здесь для различных целей. Они потребуют, чтобы вы сначала выполнили инструкции на странице [Seedminer](seedminer).
diff --git a/_pages/ru_RU/move-emunand.txt b/_pages/ru_RU/move-emunand.txt
index 2d8b91d763..2f83c66db2 100644
--- a/_pages/ru_RU/move-emunand.txt
+++ b/_pages/ru_RU/move-emunand.txt
@@ -16,7 +16,7 @@ title: "Перенос EmuNAND"
### Что понадобится
* Существующий EmuNAND
-* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Свежая версия [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Инструкция
diff --git a/_pages/ru_RU/ntrboot.txt b/_pages/ru_RU/ntrboot.txt
index b2f7fd33dc..dc9634d40c 100644
--- a/_pages/ru_RU/ntrboot.txt
+++ b/_pages/ru_RU/ntrboot.txt
@@ -17,23 +17,23 @@ title: "ntrboot"
| Флешкартридж | Текущая стоимость | "Time Bomb"? | Версия 3DS? | Версия DSi? | Примечания |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | **Поставляется с предустановленным ntrboot**; может быть прошит обратно в режим NDS флешкартриджа. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | Нет | <= 11.13.0 | <= 1.4.5 | **Поставляется с предустановленным ntrboot** ([внутренний переключатель для переключения между режимами ntrboot и NDS]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); не прошивайте ntrboot вручную. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | Нет | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | Нет | Ни одна | Ни одна | Только определенные [ревизии](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) совместимы с ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | Нет | <= 11.13.0 | <= 1.4.5 | Все RTS ревизии совместимы. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | Все R4iSDHC 20XX одинаковы. Модели 2013 несовместимы. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | Все R4iSDHC 20XX одинаковы. Модели 2013 несовместимы. |
-| **Ace3DS X** | | Нет | <= 11.13.0 | <= 1.4.5 | **Поставляется с предустановленным ntrboot** (внешний переключатель для переключения между режимами ntrboot ("3DS") и NDS); не прошивайте ntrboot вручную. |
-| **Ace3DS Plus** | | Нет | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Модели 2013 несовместимы. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. Модели 2013 несовместимы. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | Нет | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | Нет | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | Нет | Ни одна | Ни одна | |
| **R4i Gold 3DS Deluxe "Starter"** | | Нет | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | Нет | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Неизвестно | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: 3 сентября, 2019 | <= 11.13.0 | <= 1.4.5 | Все R4iSDHC 20XX одинаковы. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/ru_RU/region-changing.txt b/_pages/ru_RU/region-changing.txt
index 5e70d94eef..58bb147fe3 100644
--- a/_pages/ru_RU/region-changing.txt
+++ b/_pages/ru_RU/region-changing.txt
@@ -29,7 +29,7 @@ title: "Смена региона"
### Что понадобится
-* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* Свежая версия [FBI](https://github.com/Steveice10/FBI/releases/latest) *(`.3dsx-файл`)*
* Образ 11.5.0 CTRTransfer для вашего устройства и региона, на который вы хотите перейти:
+ - [New 3DS или 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/ru_RU/seedminer.txt b/_pages/ru_RU/seedminer.txt
index bfcb7e6cdb..8d83c5eed4 100644
--- a/_pages/ru_RU/seedminer.txt
+++ b/_pages/ru_RU/seedminer.txt
@@ -16,21 +16,7 @@ title: "Seedminer"
### Инструкция
-#### Часть I - Проверка совместимости
-
-Несмотря на то, что эта проверка не является строго необходимой для эксплойта Seedminer, последующие эксплойты требуют выполнения этой проверки, и было бы пустой тратой времени и сил применять эксплойт Seedminer, не имея возможности использовать другие эксплойты.
-
-Есть несколько различных методов дальнейшей эксплуатации Seedminer, так что даже если этот тест завершится неудачей, вы сможете использовать другой метод.
-
-#### Тест меню управления DSiWare (используется для unSAFE_MODE)
-
-1. Перейдите в "Системные настройки", "Управление данными", "DSiWare"
-1. Если консоль не зависает, тест был пройден успешно
- + Если консоль вылетает в меню HOME, значит тест не удался, и вам придется использовать устаревший метод внизу этой страницы
- + Если вы видите цветной экран перед вылетом в меню HOME, обратитесь на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) кого-нибудь вам помочь
-1. Выйдите в меню HOME
-
-#### Часть II - Подготовка
+#### Часть I - Подготовительные работы
1. Вставьте SD-карту в компьютер
1. Перейдите в папку `Nintendo 3DS` на SD-карте
@@ -52,11 +38,12 @@ title: "Seedminer"
+ Если появляется ошибка и вас не пускают в меню, значит вам нужно либо создать новый Mii, либо консоль не может подключиться к серверам Nintendo (по причине бана или проблем с соединением)
1. Найдите свой профиль Mii, затем найдите поле "Код друга" на верхнем экране
-#### Часть III - Seedminer
+#### Section II - Seedminer
1. Перейдите по ссылке [Bruteforce Movable](https://seedminer.hacks.guide/) на компьютере
+ Этот сайт может автоматизировать процесс получения `movable_part1.sed` (при помощи консоли-бота 3DS) и процесс взлома шифрования DSiWare вашей консоли (используя компьютер волонтера для запуска Seedminer)
- + Если автоматизированный сервис не функционирует, обратитесь на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) кого-нибудь вам помочь
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Введите Код друга вашей консоли (без пробелов или тире) в поле "Your friend code"
1. Вставьте имя папки из 32 символов в поле "Your ID0"
+ Не пытайтесь вводить ID0 вручную. Убедитесь, что ID0 введён правильно, скопировав и вставив его из документа, где вы сохранили его в предыдущей части
@@ -79,7 +66,7 @@ ___
Этот метод дальнейшей эксплуатации Seedminer использует ваш файл `movable.sed` для того, чтобы воспользоваться уязвимостями в SAFE_MODE прошивке, присутствующей на всех консолях 3DS.
-Этот метод совместим со всеми регионами, но в этом руководстве не рассматривается регион CHN.
+This method is compatible with all regions except CHN and TWN.
Следующий шаг: [Установка boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/ru_RU/site-navigation.txt b/_pages/ru_RU/site-navigation.txt
index b02023e974..b4f497db99 100644
--- a/_pages/ru_RU/site-navigation.txt
+++ b/_pages/ru_RU/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Завершение установки](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Установка boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Установка boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Установка boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Установка boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Перенос EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Смена региона](region-changing)
diff --git a/_pages/ru_RU/uninstall-cfw.txt b/_pages/ru_RU/uninstall-cfw.txt
index c99dec23cc..ab885fcf73 100644
--- a/_pages/ru_RU/uninstall-cfw.txt
+++ b/_pages/ru_RU/uninstall-cfw.txt
@@ -22,7 +22,7 @@ title: "Удаление кастомной прошивки"
### Что понадобится
-* Свежая версия [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Инструкция
@@ -41,12 +41,12 @@ title: "Удаление кастомной прошивки"
+ На консолях версии "New" вместо (X) будет цифра 2
+ На консолях версии "Old" вместо (X) будет цифра 0
1. Выберите файл `.app`
-1. Выберите `NCCH Image Options`
+1. Select `NCCH image options`
1. Выберите `Mount image to drive`
1. В открывшемся окне перейдите в папку `exefs`
1. В этой папке выберите файл `.firm`
-1. Выберите "Firm Image Options"
-1. Выберите "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. При появлении запроса "Decrypt before boot?" согласитесь, затем выберите "Make a copy"
1. Ваша консоль должна загрузиться в обычное меню HOME. Если это так, выключите консоль и переходите к следующей части
+ Если консоль НЕ загрузилась в обычное меню HOME, то выполнение дальнейших инструкций приведет к **БРИКУ**. Вам следует обратиться на сервер [Nintendo Homebrew в Discord](https://discord.gg/MWxPgEp) и попросите (на английском языке) кого-нибудь вам помочь
diff --git a/_pages/ru_RU/updating-b9s.txt b/_pages/ru_RU/updating-b9s.txt
index 9f55ca8a7a..229035ffee 100644
--- a/_pages/ru_RU/updating-b9s.txt
+++ b/_pages/ru_RU/updating-b9s.txt
@@ -13,7 +13,7 @@ title: "Обновление B9S"
1. Откройте Системные настройки, затем "Интернет-настройки", затем "SpotPass", затем "Отправка информации о системе"
1. Отключите опцию "Отправка информации о системе"
-1. Закройте Системные настройки
+1. Закройте Системные настройки (System settings)
1. Откройте Список друзей ([оранжевый значок в виде лица]({{ "/images/friend-list-icon.png" | absolute_url }}) на верхней строчке меню HOME)
+ Если появляется ошибка и вас не пускают в меню, значит либо нужная настройка в Списке друзей уже отключена, либо консоль не может подключиться к серверам Nintendo (по причине бана или проблем с соединением)
1. Перейдите в настройки Списка друзей, затем "Настройки сообщений друга", затем "Показать друзьям, во что вы играете"
diff --git a/_pages/sr_SP/ctrtransfer.txt b/_pages/sr_SP/ctrtransfer.txt
index d099002134..cf2c059aad 100644
--- a/_pages/sr_SP/ctrtransfer.txt
+++ b/_pages/sr_SP/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(if your device is not from one of these regions, just pick one that matches your device type)*:
diff --git a/_pages/sr_SP/finalizing-setup.txt b/_pages/sr_SP/finalizing-setup.txt
index fe3d1c1bbb..90f49a797f 100644
--- a/_pages/sr_SP/finalizing-setup.txt
+++ b/_pages/sr_SP/finalizing-setup.txt
@@ -26,7 +26,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/sr_SP/get-started.txt b/_pages/sr_SP/get-started.txt
index 0462e2a9f0..824816730c 100644
--- a/_pages/sr_SP/get-started.txt
+++ b/_pages/sr_SP/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Before starting, you may want to check your SD card for errors using [H2testw (W
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| From |
To |
- No Browser |
- Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.12.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
11.13.0 |
- Seedminer |
+ 11.13.0 |
+ Homebrew Launcher (BrowserHax 2020) |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/sr_SP/godmode9-usage.txt b/_pages/sr_SP/godmode9-usage.txt
index 5374cffab2..99014ce114 100644
--- a/_pages/sr_SP/godmode9-usage.txt
+++ b/_pages/sr_SP/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/sr_SP/home.txt b/_pages/sr_SP/home.txt
index 2d99705764..d2d66e2787 100644
--- a/_pages/sr_SP/home.txt
+++ b/_pages/sr_SP/home.txt
@@ -81,7 +81,7 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
diff --git a/_pages/sr_SP/homebrew-launcher-(browserhax-2020).txt b/_pages/sr_SP/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..18967c3719
--- /dev/null
+++ b/_pages/sr_SP/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,66 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+### Compatibility Testing
+
+To use this method, your console must be from a compatible region with a compatible browser version.
+
+You can check these details from System Settings.
+
+1. Open System Settings.
+1. In the bottom right of the top screen, you will see a firmware version string in the format of `11.13.0-45x`.
+ + The 45 is your browser version, and the letter is your region
+ + If your browser version is less than 45, you will need to update the console through the System Settings "Software Update" option
+ + E designates EUROPE
+ + U designates USA
+ + J designates JAPAN
+ + If your console has a letter other than any of these three, it is not compatible with this method.
+1. Remember your region designation. You will need to know this later.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use a [legacy method](legacy-methods)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + You may see an error stating that no applications were found. If this occurs, proceed to the next steps
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/sr_SP/installing-boot9strap-(hbl-usm).txt b/_pages/sr_SP/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..25fc1a6722
--- /dev/null
+++ b/_pages/sr_SP/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,83 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card, replacing any existing files
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/sr_SP/installing-boot9strap-(usm).txt b/_pages/sr_SP/installing-boot9strap-(usm).txt
index 34bcad613f..079b370df0 100644
--- a/_pages/sr_SP/installing-boot9strap-(usm).txt
+++ b/_pages/sr_SP/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/sr_SP/legacy-methods.txt b/_pages/sr_SP/legacy-methods.txt
index f2ad998f35..f5cf03e567 100644
--- a/_pages/sr_SP/legacy-methods.txt
+++ b/_pages/sr_SP/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
@@ -38,6 +38,8 @@ If both DS Internet Settings and DS Download Play fail to work, you will have to
___
+1. [BB3-USM](installing-boot9strap-(usm)): Seedminer + BannerBomb3 + unSAFE_MODE
+ + This method requires working shoulder buttons
1. [BannerBomb3](bannerbomb3): Seedminer + BannerBomb3 + Fredtool
+ This method is recommended if your shoulder buttons do not work
1. [Pichaxx](homebrew-launcher-(pichaxx)): Seedminer + Pichaxx + Frogtool
diff --git a/_pages/sr_SP/move-emunand.txt b/_pages/sr_SP/move-emunand.txt
index 70d4477623..8d3b747918 100644
--- a/_pages/sr_SP/move-emunand.txt
+++ b/_pages/sr_SP/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/sr_SP/region-changing.txt b/_pages/sr_SP/region-changing.txt
index 86cff75300..75af6091cf 100644
--- a/_pages/sr_SP/region-changing.txt
+++ b/_pages/sr_SP/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/sr_SP/seedminer.txt b/_pages/sr_SP/seedminer.txt
index a0afe7196b..337613229f 100644
--- a/_pages/sr_SP/seedminer.txt
+++ b/_pages/sr_SP/seedminer.txt
@@ -56,7 +56,8 @@ There are several different methods that build on the Seedminer exploit, so even
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
diff --git a/_pages/sr_SP/site-navigation.txt b/_pages/sr_SP/site-navigation.txt
index a878c9c847..2c42dcc501 100644
--- a/_pages/sr_SP/site-navigation.txt
+++ b/_pages/sr_SP/site-navigation.txt
@@ -9,6 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
++ [Homebrew Launcher (Browserhax)](homebrew-launcher-(browserhax-2020))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -37,6 +38,7 @@ sitemap: false
+ [H2testw (Windows)](h2testw-(windows))
+ [Home](/)
+ [Homebrew Launcher (Alternatives)](homebrew-launcher-(alternatives))
++ [Homebrew Launcher (BrowserHax 2020)](homebrew-launcher-(browserhax-2020))
+ [Homebrew Launcher (PicHaxx)](homebrew-launcher-(pichaxx))
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
+ [Homebrew Launcher (Steelhax)](homebrew-launcher-(steelhax))
@@ -50,6 +52,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changing](region-changing)
diff --git a/_pages/sr_SP/uninstall-cfw.txt b/_pages/sr_SP/uninstall-cfw.txt
index 30e878bc92..bea4e7092a 100644
--- a/_pages/sr_SP/uninstall-cfw.txt
+++ b/_pages/sr_SP/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/sv_SE/a9lh-to-b9s.txt b/_pages/sv_SE/a9lh-to-b9s.txt
index 445c7c4318..ac303ddc4f 100644
--- a/_pages/sv_SE/a9lh-to-b9s.txt
+++ b/_pages/sv_SE/a9lh-to-b9s.txt
@@ -18,15 +18,15 @@ If you have a PIN enabled on Luma3DS, SafeB9SInstaller will give you an "OTP Cry
{: .notice--warning}
{% capture notice-1 %}
-Det har förekommit rapporter om en våg av BANNINGAR som delas ut till CFW användare av Nintendo. För skydda dig själv, följ dessa steg innan du börjar guiden:
+There have been reports of a wave of bans being handed out to CFW users by Nintendo. För skydda dig själv, följ dessa steg innan du börjar guiden:
-1. Gå till System Settings, sedan "Internet Settings", sedan "SpotPass" och sedan "Sending of System Information"
-1. Inaktivera alternativet ”Sending of System Information”
-1. Avsluta System Settings
+1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
+1. Disable the "Sending of System Information" option
+1. Exit the System Settings
1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
+ If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Inaktivera alternativet "Show friends what you're playing"
+1. Disable the "Show friends what you're playing" option
1. Exit your Friend List
{% endcapture %}
diff --git a/_pages/sv_SE/ctrtransfer.txt b/_pages/sv_SE/ctrtransfer.txt
index 276dd40938..995cbd7cc7 100644
--- a/_pages/sv_SE/ctrtransfer.txt
+++ b/_pages/sv_SE/ctrtransfer.txt
@@ -17,7 +17,7 @@ Du MÅSTE redan ha installerat Luma3DS och boot9strap eller arm9loaderhax för a
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* 11.5.0 CTRTransfer-avbilden för din enhet och region
*(Om din enhet inte är från någon av dessa regioner, välj bara en som stämmer överens med din enhetstyp) *:
diff --git a/_pages/sv_SE/finalizing-setup.txt b/_pages/sv_SE/finalizing-setup.txt
index 5e25349416..cdecd99342 100644
--- a/_pages/sv_SE/finalizing-setup.txt
+++ b/_pages/sv_SE/finalizing-setup.txt
@@ -26,7 +26,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/sv_SE/get-started.txt b/_pages/sv_SE/get-started.txt
index 251050cf6a..71d5ac6819 100644
--- a/_pages/sv_SE/get-started.txt
+++ b/_pages/sv_SE/get-started.txt
@@ -8,10 +8,6 @@ titel: ”Kom igång”
Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Innan du börjar så bör du söka igenom ditt SD-kort efter fel med [H2testw (W
{: .notice--warning}
{% capture notice-1 %}
-Det har förekommit rapporter om en våg av BANNINGAR som delas ut till CFW användare av Nintendo. För att skydda dig själv, gör följande steg innan du börjar denna guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Gå till System Settings, sedan "Internet Settings", sedan "SpotPass" och sedan "Sending of System Information"
-1. Inaktivera alternativet ”Sending of System Information”
-1. Avsluta System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Inaktivera alternativet "Show friends what you're playing"
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ Det har förekommit rapporter om en våg av BANNINGAR som delas ut till CFW anv
| From |
To |
- No Browser |
- Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/sv_SE/godmode9-usage.txt b/_pages/sv_SE/godmode9-usage.txt
index f6a0985f38..e38bb7b4b3 100644
--- a/_pages/sv_SE/godmode9-usage.txt
+++ b/_pages/sv_SE/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/sv_SE/home.txt b/_pages/sv_SE/home.txt
index 2d99705764..71e18aeec4 100644
--- a/_pages/sv_SE/home.txt
+++ b/_pages/sv_SE/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt b/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..435904a531
--- /dev/null
+++ b/_pages/sv_SE/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Obligatorisk läsning
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..0ebb0598a1
--- /dev/null
+++ b/_pages/sv_SE/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Obligatorisk läsning
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/sv_SE/installing-boot9strap-(usm).txt b/_pages/sv_SE/installing-boot9strap-(usm).txt
index f03ad185cb..e4e4211648 100644
--- a/_pages/sv_SE/installing-boot9strap-(usm).txt
+++ b/_pages/sv_SE/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/sv_SE/legacy-methods.txt b/_pages/sv_SE/legacy-methods.txt
index dec6e2301e..95173114e1 100644
--- a/_pages/sv_SE/legacy-methods.txt
+++ b/_pages/sv_SE/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/sv_SE/move-emunand.txt b/_pages/sv_SE/move-emunand.txt
index 770415151e..5504589140 100644
--- a/_pages/sv_SE/move-emunand.txt
+++ b/_pages/sv_SE/move-emunand.txt
@@ -16,7 +16,7 @@ Du MÅSTE redan ha installerat Luma3DS och boot9strap eller arm9loaderhax för a
### What You Need
* An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/sv_SE/ntrboot.txt b/_pages/sv_SE/ntrboot.txt
index de9e5ad355..32388acb8c 100644
--- a/_pages/sv_SE/ntrboot.txt
+++ b/_pages/sv_SE/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/sv_SE/region-changing.txt b/_pages/sv_SE/region-changing.txt
index 2c7205d55e..33a7a4fa52 100644
--- a/_pages/sv_SE/region-changing.txt
+++ b/_pages/sv_SE/region-changing.txt
@@ -29,7 +29,7 @@ Du MÅSTE redan ha installerat Luma3DS och boot9strap eller arm9loaderhax för a
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/sv_SE/seedminer.txt b/_pages/sv_SE/seedminer.txt
index 152ad8e618..3bbd6c5454 100644
--- a/_pages/sv_SE/seedminer.txt
+++ b/_pages/sv_SE/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Insert your SD card into your computer
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/sv_SE/site-navigation.txt b/_pages/sv_SE/site-navigation.txt
index a133ddca55..11e57419a9 100644
--- a/_pages/sv_SE/site-navigation.txt
+++ b/_pages/sv_SE/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Slutför installationen](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Flytta EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Ändra Region](region-changing)
diff --git a/_pages/sv_SE/uninstall-cfw.txt b/_pages/sv_SE/uninstall-cfw.txt
index 561faef93a..f81eaca1ca 100644
--- a/_pages/sv_SE/uninstall-cfw.txt
+++ b/_pages/sv_SE/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Observera att om du har någon annan payload än `GodMode9.firm` i mappen `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Observera att om du har någon annan payload än `GodMode9.firm` i mappen `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/sv_SE/updating-b9s.txt b/_pages/sv_SE/updating-b9s.txt
index cbedf47b0a..1ca440a9c6 100644
--- a/_pages/sv_SE/updating-b9s.txt
+++ b/_pages/sv_SE/updating-b9s.txt
@@ -9,15 +9,15 @@ title: "Updating B9S"
This page is for existing boot9strap users to update their installation of boot9strap to the latest version.
{% capture notice-1 %}
-Det har förekommit rapporter om en våg av BANNINGAR som delas ut till CFW användare av Nintendo. För att skydda dig själv, gör följande steg innan du börjar denna guide:
+There have been reports of a wave of bans being handed out to CFW users by Nintendo. För skydda dig själv, följ dessa steg innan du börjar guiden:
-1. Gå till System Settings, sedan "Internet Settings", sedan "SpotPass" och sedan "Sending of System Information"
-1. Inaktivera alternativet ”Sending of System Information”
-1. Avsluta System Settings
+1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
+1. Disable the "Sending of System Information" option
+1. Exit the System Settings
1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
+ If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Inaktivera alternativet "Show friends what you're playing"
+1. Disable the "Show friends what you're playing" option
1. Exit your Friend List
{% endcapture %}
diff --git a/_pages/th_TH/ctrtransfer.txt b/_pages/th_TH/ctrtransfer.txt
index d099002134..cf2c059aad 100644
--- a/_pages/th_TH/ctrtransfer.txt
+++ b/_pages/th_TH/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(if your device is not from one of these regions, just pick one that matches your device type)*:
diff --git a/_pages/th_TH/finalizing-setup.txt b/_pages/th_TH/finalizing-setup.txt
index fe3d1c1bbb..90f49a797f 100644
--- a/_pages/th_TH/finalizing-setup.txt
+++ b/_pages/th_TH/finalizing-setup.txt
@@ -26,7 +26,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/th_TH/get-started.txt b/_pages/th_TH/get-started.txt
index 0462e2a9f0..7593529e50 100644
--- a/_pages/th_TH/get-started.txt
+++ b/_pages/th_TH/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Before starting, you may want to check your SD card for errors using [H2testw (W
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| From |
To |
- No Browser |
- Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/th_TH/godmode9-usage.txt b/_pages/th_TH/godmode9-usage.txt
index 5374cffab2..99014ce114 100644
--- a/_pages/th_TH/godmode9-usage.txt
+++ b/_pages/th_TH/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/th_TH/home.txt b/_pages/th_TH/home.txt
index 2d99705764..71e18aeec4 100644
--- a/_pages/th_TH/home.txt
+++ b/_pages/th_TH/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt b/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/th_TH/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/th_TH/installing-boot9strap-(hbl-usm).txt b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..62fd4bfa66
--- /dev/null
+++ b/_pages/th_TH/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/th_TH/installing-boot9strap-(usm).txt b/_pages/th_TH/installing-boot9strap-(usm).txt
index 34bcad613f..079b370df0 100644
--- a/_pages/th_TH/installing-boot9strap-(usm).txt
+++ b/_pages/th_TH/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/th_TH/legacy-methods.txt b/_pages/th_TH/legacy-methods.txt
index f2ad998f35..4c5aa95012 100644
--- a/_pages/th_TH/legacy-methods.txt
+++ b/_pages/th_TH/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/th_TH/move-emunand.txt b/_pages/th_TH/move-emunand.txt
index 70d4477623..8d3b747918 100644
--- a/_pages/th_TH/move-emunand.txt
+++ b/_pages/th_TH/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/th_TH/ntrboot.txt b/_pages/th_TH/ntrboot.txt
index 76f128345f..a5f018c69a 100644
--- a/_pages/th_TH/ntrboot.txt
+++ b/_pages/th_TH/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/th_TH/region-changing.txt b/_pages/th_TH/region-changing.txt
index 86cff75300..75af6091cf 100644
--- a/_pages/th_TH/region-changing.txt
+++ b/_pages/th_TH/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/th_TH/seedminer.txt b/_pages/th_TH/seedminer.txt
index a0afe7196b..ff9a1fb4c3 100644
--- a/_pages/th_TH/seedminer.txt
+++ b/_pages/th_TH/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Insert your SD card into your computer
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/th_TH/site-navigation.txt b/_pages/th_TH/site-navigation.txt
index a878c9c847..9f7a473f8a 100644
--- a/_pages/th_TH/site-navigation.txt
+++ b/_pages/th_TH/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changing](region-changing)
diff --git a/_pages/th_TH/uninstall-cfw.txt b/_pages/th_TH/uninstall-cfw.txt
index 30e878bc92..bea4e7092a 100644
--- a/_pages/th_TH/uninstall-cfw.txt
+++ b/_pages/th_TH/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/tr_TR/bannerbomb3.txt b/_pages/tr_TR/bannerbomb3.txt
index 9c4ece9432..4f3025d1d0 100644
--- a/_pages/tr_TR/bannerbomb3.txt
+++ b/_pages/tr_TR/bannerbomb3.txt
@@ -6,7 +6,7 @@ title: "BannerBomb3"
### Okumanız Gerekli
-To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
+Sistem DSiWare dosyasını çıkartabilmek için Settings (Ayarlar) uygulamasında bulunan DSiWare Data Management (DSiWare Veri Yönetimi) kısmındaki bir açıktan yararlanıyoruz.
To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to dump the DSi Internet Settings application to the SD root.
diff --git a/_pages/tr_TR/ctrtransfer.txt b/_pages/tr_TR/ctrtransfer.txt
index 13b1f3b4e5..2cf0f177cb 100644
--- a/_pages/tr_TR/ctrtransfer.txt
+++ b/_pages/tr_TR/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(Cihazınız bu bölgelerden biri değilse, cihazınızın türüne uyan birini seçin)*:
diff --git a/_pages/tr_TR/finalizing-setup.txt b/_pages/tr_TR/finalizing-setup.txt
index a2e8fab8cd..3baa0e3dea 100644
--- a/_pages/tr_TR/finalizing-setup.txt
+++ b/_pages/tr_TR/finalizing-setup.txt
@@ -26,7 +26,7 @@ Bu süreç boyunca, aşağıdaki gibi programları kuruyoruz:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/tr_TR/get-started.txt b/_pages/tr_TR/get-started.txt
index 516e511370..4b29909633 100644
--- a/_pages/tr_TR/get-started.txt
+++ b/_pages/tr_TR/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Uygun sayfaya ulaşmak için aşağıdaki tablodan sürümünüze uyanı seçin. Note that the "from" and "to" fields are inclusive. Bu şu anlama gelir,örneğin, "9.0.0 'dan 9.2.0 ye kadar" sırasına 9.0.0, 9.1.0, ve 9.2.0 dahildir.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). Eğer versiyon numaranız -0 ise tarayıcınız yoktur, -0 dışındaki her hangi bir numaraya sahipseniz tarayıcınız yüklüdür.
-
-Örneğin "5.0.0-0U" söz konusu olduğunda, "Tarayıcı yok" sütununu ve 5.0.0'dan 5.1.0'a kadar seçeneğini seçerek devam edilmesi gerekir. Çünkü sistem o versiyon aralığında ve tarayıcı yüklü değil.
-
Cihaz versiyonu, sistem ayarlarındayken üst ekranın sağ alt kısmında görülebilir.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Başlamadan önce, SD kartınızı hatalara karşı kontrol edebilirsiniz. [H2te
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| -dan |
-e kadar |
- Tarayıcı Yok |
- Tarayıcı Var |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/tr_TR/godmode9-usage.txt b/_pages/tr_TR/godmode9-usage.txt
index 13799b5565..e41515e73b 100644
--- a/_pages/tr_TR/godmode9-usage.txt
+++ b/_pages/tr_TR/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/tr_TR/home.txt b/_pages/tr_TR/home.txt
index 1801684cf6..422a0aa56b 100644
--- a/_pages/tr_TR/home.txt
+++ b/_pages/tr_TR/home.txt
@@ -81,8 +81,8 @@ Birçok oyun için yedekleme, düzenleme ve geri yükleme
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ Her şey plana uygun giderse hiçbir veri kaybetmeden başlangıçta sahip olduğunuz her şeyi koruyacaksınız (oyunlar, NNID, save dosyaları vs. korunacak).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ SD kartınız [GPT değil MBR](http://www.howtogeek.com/245610/) olmalıdır.(Cihaz içinde gelen SD kart varsayılan olarak MBR'dir).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ SD kartınız [GPT değil MBR](http://www.howtogeek.com/245610/) olmalıdır.(Cihaz içinde gelen SD kart varsayılan olarak MBR'dir). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt b/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..94501d5c8a
--- /dev/null
+++ b/_pages/tr_TR/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title = "İçindekiler"%}
+
+### Okumanız Gerekli
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..397ab8517a
--- /dev/null
+++ b/_pages/tr_TR/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title = "İçindekiler"%}
+
+### Okumanız Gerekli
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Kaydedip yeniden başlatmak için (Start) basın
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/tr_TR/installing-boot9strap-(usm).txt b/_pages/tr_TR/installing-boot9strap-(usm).txt
index 9e52d0800a..46b46843ff 100644
--- a/_pages/tr_TR/installing-boot9strap-(usm).txt
+++ b/_pages/tr_TR/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/tr_TR/legacy-methods.txt b/_pages/tr_TR/legacy-methods.txt
index ba8f72088f..cfbc535a83 100644
--- a/_pages/tr_TR/legacy-methods.txt
+++ b/_pages/tr_TR/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/tr_TR/move-emunand.txt b/_pages/tr_TR/move-emunand.txt
index e0fbb0248d..8f4b032498 100644
--- a/_pages/tr_TR/move-emunand.txt
+++ b/_pages/tr_TR/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* Bir varolan EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/tr_TR/ntrboot.txt b/_pages/tr_TR/ntrboot.txt
index 58604e05bb..f0a6070d1f 100644
--- a/_pages/tr_TR/ntrboot.txt
+++ b/_pages/tr_TR/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/tr_TR/region-changing.txt b/_pages/tr_TR/region-changing.txt
index c4e0c97ac3..864a2dbc5c 100644
--- a/_pages/tr_TR/region-changing.txt
+++ b/_pages/tr_TR/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/tr_TR/seedminer.txt b/_pages/tr_TR/seedminer.txt
index bc8a269066..97cbc9d6bd 100644
--- a/_pages/tr_TR/seedminer.txt
+++ b/_pages/tr_TR/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. SD kartınızı bilgisayarınıza takın
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/tr_TR/site-navigation.txt b/_pages/tr_TR/site-navigation.txt
index 4c3428e8fb..37508cfd4b 100644
--- a/_pages/tr_TR/site-navigation.txt
+++ b/_pages/tr_TR/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [EmuNAND' Taşıma](move-emunand)
+ [ntrboot](ntrboot)
+ [Bölge Değiştirme](region-changing)
diff --git a/_pages/tr_TR/uninstall-cfw.txt b/_pages/tr_TR/uninstall-cfw.txt
index 36f1ef9e05..a2be749abb 100644
--- a/_pages/tr_TR/uninstall-cfw.txt
+++ b/_pages/tr_TR/uninstall-cfw.txt
@@ -22,7 +22,7 @@ SD Kartınızdaki '/luma/payloads/' klasöründe 'Godmode9.firm' dışında bir
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ SD Kartınızdaki '/luma/payloads/' klasöründe 'Godmode9.firm' dışında bir
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/uk_UA/ctrtransfer.txt b/_pages/uk_UA/ctrtransfer.txt
index d099002134..cf2c059aad 100644
--- a/_pages/uk_UA/ctrtransfer.txt
+++ b/_pages/uk_UA/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(if your device is not from one of these regions, just pick one that matches your device type)*:
diff --git a/_pages/uk_UA/finalizing-setup.txt b/_pages/uk_UA/finalizing-setup.txt
index fe3d1c1bbb..90f49a797f 100644
--- a/_pages/uk_UA/finalizing-setup.txt
+++ b/_pages/uk_UA/finalizing-setup.txt
@@ -26,7 +26,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/uk_UA/get-started.txt b/_pages/uk_UA/get-started.txt
index 0462e2a9f0..7593529e50 100644
--- a/_pages/uk_UA/get-started.txt
+++ b/_pages/uk_UA/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Before starting, you may want to check your SD card for errors using [H2testw (W
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| From |
To |
- No Browser |
- Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/uk_UA/godmode9-usage.txt b/_pages/uk_UA/godmode9-usage.txt
index 5374cffab2..99014ce114 100644
--- a/_pages/uk_UA/godmode9-usage.txt
+++ b/_pages/uk_UA/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/uk_UA/home.txt b/_pages/uk_UA/home.txt
index 2d99705764..71e18aeec4 100644
--- a/_pages/uk_UA/home.txt
+++ b/_pages/uk_UA/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt b/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/uk_UA/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..62fd4bfa66
--- /dev/null
+++ b/_pages/uk_UA/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/uk_UA/installing-boot9strap-(usm).txt b/_pages/uk_UA/installing-boot9strap-(usm).txt
index 34bcad613f..079b370df0 100644
--- a/_pages/uk_UA/installing-boot9strap-(usm).txt
+++ b/_pages/uk_UA/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/uk_UA/legacy-methods.txt b/_pages/uk_UA/legacy-methods.txt
index f2ad998f35..4c5aa95012 100644
--- a/_pages/uk_UA/legacy-methods.txt
+++ b/_pages/uk_UA/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/uk_UA/move-emunand.txt b/_pages/uk_UA/move-emunand.txt
index 70d4477623..8d3b747918 100644
--- a/_pages/uk_UA/move-emunand.txt
+++ b/_pages/uk_UA/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/uk_UA/ntrboot.txt b/_pages/uk_UA/ntrboot.txt
index 76f128345f..a5f018c69a 100644
--- a/_pages/uk_UA/ntrboot.txt
+++ b/_pages/uk_UA/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/uk_UA/region-changing.txt b/_pages/uk_UA/region-changing.txt
index 86cff75300..75af6091cf 100644
--- a/_pages/uk_UA/region-changing.txt
+++ b/_pages/uk_UA/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/uk_UA/seedminer.txt b/_pages/uk_UA/seedminer.txt
index a0afe7196b..ff9a1fb4c3 100644
--- a/_pages/uk_UA/seedminer.txt
+++ b/_pages/uk_UA/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Insert your SD card into your computer
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/uk_UA/site-navigation.txt b/_pages/uk_UA/site-navigation.txt
index a878c9c847..9f7a473f8a 100644
--- a/_pages/uk_UA/site-navigation.txt
+++ b/_pages/uk_UA/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changing](region-changing)
diff --git a/_pages/uk_UA/uninstall-cfw.txt b/_pages/uk_UA/uninstall-cfw.txt
index 30e878bc92..bea4e7092a 100644
--- a/_pages/uk_UA/uninstall-cfw.txt
+++ b/_pages/uk_UA/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/vi_VN/ctrtransfer.txt b/_pages/vi_VN/ctrtransfer.txt
index d099002134..cf2c059aad 100644
--- a/_pages/vi_VN/ctrtransfer.txt
+++ b/_pages/vi_VN/ctrtransfer.txt
@@ -17,7 +17,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and region
*(if your device is not from one of these regions, just pick one that matches your device type)*:
diff --git a/_pages/vi_VN/finalizing-setup.txt b/_pages/vi_VN/finalizing-setup.txt
index fe3d1c1bbb..90f49a797f 100644
--- a/_pages/vi_VN/finalizing-setup.txt
+++ b/_pages/vi_VN/finalizing-setup.txt
@@ -26,7 +26,7 @@ During this process, we also setup programs such as the following:
* The latest release of [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(the `.cia` file)*
* The latest release of [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(the `.cia` file)*
* The latest release of [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the `.cia` and `.3dsx` files)*
* The latest release of [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/vi_VN/get-started.txt b/_pages/vi_VN/get-started.txt
index 0462e2a9f0..7593529e50 100644
--- a/_pages/vi_VN/get-started.txt
+++ b/_pages/vi_VN/get-started.txt
@@ -8,10 +8,6 @@ title: "Get Started"
Select the appropriate page for your version from the chart below. Note that the "from" and "to" fields are inclusive. This means that, for example, the "from 9.0.0 to 9.2.0" row includes 9.0.0, 9.1.0, and 9.2.0.
-Additionally, note that the last two columns of the chart refer to the last number of your version (which corresponds to the browser version installed to the system). If the version is -0 then you do not have a browser, while any number above -0 indicates a browser is installed.
-
-In the case of "5.0.0-0U" for example, you would follow the "No Browser" column and 5.0.0 to 5.1.0 row because the system is on the a system version in that range and has no browser installed.
-
Your device version can be found at the bottom right of the top screen of the System Settings.
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ Before starting, you may want to check your SD card for errors using [H2testw (W
{: .notice--warning}
{% capture notice-1 %}
-There have been reports of a wave of bans being handed out to CFW users by Nintendo. To protect yourself, please do the following steps before starting this guide:
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. Go to System Settings, then "Internet Settings", then "SpotPass", then "Sending of System Information"
-1. Disable the "Sending of System Information" option
-1. Exit the System Settings
-1. Go to your Friend List (the [orange Face Icon]({{ "/images/friend-list-icon.png" | absolute_url }}) in the top row of your Home Menu)
- + If you receive an error and are kicked out of the menu, the Friend List setting is either already disabled or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
-1. Go to the Friend List settings, then "Friend Notification Settings", then "Show friends what you're playing"
-1. Disable the "Show friends what you're playing" option
-1. Exit your Friend List
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ There have been reports of a wave of bans being handed out to CFW users by Ninte
| From |
To |
- No Browser |
- Browser |
+ Action |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ Update to latest firmware or use an "All Versions" Method |
| 2.1.0 |
8.1.0 |
- Installing boot9strap (Soundhax) |
+ Installing boot9strap (Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ Update to latest firmware or use an "All Versions" Method |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
ALL VERSIONS
|
- ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
+ ntrboot
(Requires a Compatible Flashcart) or Installing boot9strap (Hardmod)
(Requires Soldering) |
diff --git a/_pages/vi_VN/godmode9-usage.txt b/_pages/vi_VN/godmode9-usage.txt
index 5374cffab2..99014ce114 100644
--- a/_pages/vi_VN/godmode9-usage.txt
+++ b/_pages/vi_VN/godmode9-usage.txt
@@ -22,7 +22,7 @@ Some of the instructions below are only applicable to the latest version of GodM
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
diff --git a/_pages/vi_VN/home.txt b/_pages/vi_VN/home.txt
index 2d99705764..71e18aeec4 100644
--- a/_pages/vi_VN/home.txt
+++ b/_pages/vi_VN/home.txt
@@ -81,8 +81,8 @@ For a list of each of the calculated sighax signatures, see [this gist](https://
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ If everything goes according to plan, you will lose no data and end up with everything that you started with (games, NNID, saves, etc will be preserved).
+ Keep your device plugged in and charged throughout the entire process to avoid data loss or damage from an unexpected power-off!
-+ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default).
-+ If you need to format a brand new SD card, you can use [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
++ Your SD card should be [MBR, not GPT](http://www.howtogeek.com/245610/) (the SD card that comes with your device will be MBR by default). The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ The Old 2DS is essentially identical to the Old 3DS in terms of software, while the New 2DS is essentially identical to the New 3DS in terms of software. Any steps which say "Old 3DS" also apply to Old 2DS, and any steps which say "New 3DS" also apply to New 2DS.
___
diff --git a/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt b/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..e040c8e855
--- /dev/null
+++ b/_pages/vi_VN/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### What You Need
+
+* The latest release of [the Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### Instructions
+
+#### Section I - Prep Work
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. Wait for the process to complete
+ + If it displays a yellow screen, power your console off, then try this section again
+ + If you get an error, [follow this troubleshooting guide](troubleshooting#a-browser-based-exploit-is-not-working)
+1. If the exploit was successful, your device will have loaded the Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..62fd4bfa66
--- /dev/null
+++ b/_pages/vi_VN/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="Table of Contents" %}
+
+### Required Reading
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### What You Need
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### Section I - Prep Work
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### Section III - Configuring Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. Use the (A) button and the D-Pad to turn on the following:
+ + **"Show NAND or user string in System Settings"**
+1. Press (Start) to save and reboot
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. Launch the Download Play application
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. Select "Miscellaneous options"
+1. Select "Switch the hb. title to the current app."
+1. Press (B) to continue
+1. Press (B) to return to the Rosalina main menu
+1. Press (B) to exit the Rosalina menu
+1. Press (Home), then close Download Play
+1. Relaunch the Download Play application
+1. Your device should load the Homebrew Launcher
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### Continue to [Finalizing Setup](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/vi_VN/installing-boot9strap-(usm).txt b/_pages/vi_VN/installing-boot9strap-(usm).txt
index 34bcad613f..079b370df0 100644
--- a/_pages/vi_VN/installing-boot9strap-(usm).txt
+++ b/_pages/vi_VN/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### Section I - Prep Work
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/vi_VN/legacy-methods.txt b/_pages/vi_VN/legacy-methods.txt
index f2ad998f35..4c5aa95012 100644
--- a/_pages/vi_VN/legacy-methods.txt
+++ b/_pages/vi_VN/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/vi_VN/move-emunand.txt b/_pages/vi_VN/move-emunand.txt
index 70d4477623..8d3b747918 100644
--- a/_pages/vi_VN/move-emunand.txt
+++ b/_pages/vi_VN/move-emunand.txt
@@ -16,7 +16,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
* An existing EmuNAND
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest)
### Instructions
diff --git a/_pages/vi_VN/ntrboot.txt b/_pages/vi_VN/ntrboot.txt
index 76f128345f..a5f018c69a 100644
--- a/_pages/vi_VN/ntrboot.txt
+++ b/_pages/vi_VN/ntrboot.txt
@@ -17,23 +17,23 @@ Note that carts with a "Time Bomb" will no longer be able to launch `.nds` files
| Flashcart Name | Current Price | "Time Bomb"? | 3DS Versions? | DSi Versions? | Other Notes |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 | No | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 2013 models are incompatible. |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | No | None | None | |
| **R4i Gold 3DS Deluxe "Starter"** | | No | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | No | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/vi_VN/region-changing.txt b/_pages/vi_VN/region-changing.txt
index 86cff75300..75af6091cf 100644
--- a/_pages/vi_VN/region-changing.txt
+++ b/_pages/vi_VN/region-changing.txt
@@ -29,7 +29,7 @@ You MUST have already installed Luma3DS and boot9strap to use this.
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* The latest release of [FBI](https://github.com/Steveice10/FBI/releases/latest) *(the`.3dsx` file)*
* The 11.5.0 CTRTransfer image for your device and the region that you want to change to:
+ - [New 3DS or 2DS - 11.5.0 - EUR - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/vi_VN/seedminer.txt b/_pages/vi_VN/seedminer.txt
index a0afe7196b..ff9a1fb4c3 100644
--- a/_pages/vi_VN/seedminer.txt
+++ b/_pages/vi_VN/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### Instructions
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### Section II - Prep Work
+#### Section I - Prep Work
1. Insert your SD card into your computer
1. Navigate to the `Nintendo 3DS` folder on your SD card
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ If you receive an error and are kicked out of the menu, you either must create a new Mii or your console cannot connect to Nintendo's servers (due to a ban or connection issues)
1. Find your Mii profile, then find the "Friend Code" field on the top screen
-#### Section III - Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ This site can automate the retrieval of `movable_part1.sed` (using a bot 3DS console) and the breaking of your device's DSiWare encryption (using a volunteer's computer to run Seedminer)
- + If the automated service is nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. Enter your device's Friend Code (with no spaces or dashes) into the "Your friend code" field
1. Paste your device's 32 character long folder name into the "Your ID0" field
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/vi_VN/site-navigation.txt b/_pages/vi_VN/site-navigation.txt
index a878c9c847..9f7a473f8a 100644
--- a/_pages/vi_VN/site-navigation.txt
+++ b/_pages/vi_VN/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [Finalizing Setup](finalizing-setup)
+ [Homebrew Launcher (Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [Installing boot9strap (Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [Move EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [Region Changing](region-changing)
diff --git a/_pages/vi_VN/uninstall-cfw.txt b/_pages/vi_VN/uninstall-cfw.txt
index 30e878bc92..bea4e7092a 100644
--- a/_pages/vi_VN/uninstall-cfw.txt
+++ b/_pages/vi_VN/uninstall-cfw.txt
@@ -22,7 +22,7 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
### What You Need
-* The latest release of [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### Instructions
@@ -41,12 +41,12 @@ Note that if you have any payload files other than `GodMode9.firm` in the `/luma
+ On a "New" edition console, the (X) will instead be 2
+ On an "Old" edition console, the (X) will instead be 0
1. Select the `.app` file
-1. Select `NCCH Image Options`
+1. Select `NCCH image options`
1. Select `Mount image to drive`
1. In the window that appears, open the `exefs` folder
1. In this folder, select the `.firm` file
-1. Select "Firm Image Options"
-1. Select "Boot Firm"
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. When prompted, choose to decrypt and make a copy
1. You should boot into the regular 3DS Home Menu. If you do, power your device off and continue to the next section
+ If you do NOT boot into the regular 3DS Home Menu, continuing with these instructions **WILL** brick your device. You should join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
diff --git a/_pages/zh_CN/a9lh-to-b9s.txt b/_pages/zh_CN/a9lh-to-b9s.txt
index bb68ce5709..b26f4197fb 100644
--- a/_pages/zh_CN/a9lh-to-b9s.txt
+++ b/_pages/zh_CN/a9lh-to-b9s.txt
@@ -43,9 +43,9 @@ title: "A9LH 升级 B9S"
* - **仅使用 New 3DS 的用户需下载:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* 7.0.5版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(下载 `.7z` 格式的压缩包文件)*
+* 7.0.5版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) **（下载 `.7z` 格式的压缩包文件）**
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件)*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
### 操作步骤
@@ -64,7 +64,7 @@ title: "A9LH 升级 B9S"
1. 从 SafeB9SInstaller `.zip` 压缩包中复制 `SafeB9SInstaller.bin` 到SD卡 `/luma/payloads/` 目录中
1. 在 SD 卡根目录创建一个名为 `boot9strap` 的文件夹
1. 从boot9strap `.zip` 文件中复制 `boot9strap.firm` 和 `boot9strap.firm.sha` 到你SD卡的 `/boot9strap/` 文件夹中
-1. **仅限 New 3DS 用户:**复制 `secret_sector.bin` 到SD卡上的 `/boot9strap/` 文件夹
+1. **仅限 New 3DS 用户：**复制 `secret_sector.bin` 到 SD 卡上的 `/boot9strap/` 文件夹
![]({{ "/images/screenshots/a9lh-to-b9s-file-layout.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/zh_CN/cart-update.txt b/_pages/zh_CN/cart-update.txt
index 53a38980a5..71b19f0f97 100644
--- a/_pages/zh_CN/cart-update.txt
+++ b/_pages/zh_CN/cart-update.txt
@@ -12,9 +12,9 @@ title: "通过游戏卡带升级 3DS"
注意，卡带升级只会更新系统核心组件，如系统设置和桌面菜单等等。 卡带升级不会更新 3DS 的音乐播放器与网络相关的组件，如系统迁移，互联网浏览器， StreetPass Mii 广场和 eShop。
-这也就是说，如果系统本身就安装有旧版本的“任天堂 3DS 音乐(Nintendo 3DS Sound)”程序 *（低于3.0.0的版本）* 且通过含有新版此程序的卡带进行更新，将导致 [Soundhax](homebrew-launcher-(soundhax)) 漏洞无法正常使用！ 你需要用[其他方法](homebrew-launcher-(alternatives))来进入 Homebrew Launcher！
+这也就是说，如果系统本身就安装有旧版本的“任天堂 3DS 音乐(Nintendo 3DS Sound)”程序 **（低于3.0.0的版本）** 且通过含有新版此程序的卡带进行更新，将导致 [Soundhax](homebrew-launcher-(soundhax)) 漏洞无法正常使用！ 你需要用[其他方法](homebrew-launcher-(alternatives))来进入 Homebrew Launcher！
-这也意味着卡带更新不会在你的3DS没有浏览器的情况下给你安装浏览器。 它**只会**升级实际的系统版本*（比如，2.1.0-0到6.0.0-0）*。 版本号的最后一位*(即 -0)***不会**变更。
+这也意味着卡带更新不会在你的3DS没有浏览器的情况下给你安装浏览器。 它**只会**升级实际的系统版本**（比如，2.1.0-0 到 6.0.0-0）**。 版本号的最后一位*(即 -0)***不会**变更。
{% endcapture %}
{{ notice-1 | markdownify }}
diff --git a/_pages/zh_CN/ctrtransfer.txt b/_pages/zh_CN/ctrtransfer.txt
index 4726cdbda4..4e61da03bb 100644
--- a/_pages/zh_CN/ctrtransfer.txt
+++ b/_pages/zh_CN/ctrtransfer.txt
@@ -17,10 +17,10 @@ title: "CTRtransfer"
### 你需要准备点啥？
-* 最新版 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
-* 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) *（下载 `.3dsx` 文件）*
+* v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
+* 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) **（下载 `.3dsx` 文件）**
* 对应你设备型号和地区的 11.5.0 Ctrtransfer 镜像
-*（如果你的主机不在下面所列的区域中，那么挑选一个对应你的设备型号的即可）*：
+**（如果你的主机不在下面所列的区域中，那么挑选一个对应你的设备型号的即可）**：
+ - [New 3DS 或 New 2DS - 11.5.0 - 欧版 - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
+ - [New 3DS 或 New 2DS - 11.5.0 - 日版 - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
+ - [New 3DS 或 New 2DS - 11.5.0 - 韩版 - CTRTransfer](magnet:?xt=urn:btih:c9e4de20d30b80032a5dd6f675fecb6d748f71b1&dn=11.5.0-34K_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/zh_CN/faq.txt b/_pages/zh_CN/faq.txt
index bdc626436e..fa3c944fa9 100644
--- a/_pages/zh_CN/faq.txt
+++ b/_pages/zh_CN/faq.txt
@@ -2,50 +2,50 @@
title: "常见问题"
---
-**问：** *我的主机系统是最新版， 可以破解吗？*
-**答:** 是的
+**问：** **我的主机系统是最新版， 可以破解吗？**
+**答：** 是的
-**问:** *我该如何升级Luma3DS？*
-**答:** 使用 [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
+**问：** **我该如何升级Luma3DS？**
+**答：** 使用 [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest)
-**问:** *我听说有一些破解是要买一些工具的，比如 Gateway、Sky3DS 之类的玩意儿。 我要买么？*
-**答:** 不。 boot9strap 是目前最好的 3DS 破解，因为它在开机前几秒钟就会将所需的东西加载完毕。
+**问：** **我听说有一些破解是要买一些工具的，比如 Gateway、Sky3DS 之类的玩意儿。 我要买么？**
+**答：** 不。 boot9strap 是目前最好的 3DS 破解，因为它在开机前几秒钟就会将所需的东西加载完毕。
-**问:** *我该如何将 Gateway 中的游戏存档迁移到机器内安装的游戏中？*
-**答:** 看[这里](https://gbatemp.net/threads/425743/)
+**问：** **我该如何将 Gateway 中的游戏存档迁移到机器内安装的游戏中？**
+**答：** 看[这里](https://gbatemp.net/threads/425743/)
-**问:** *破解我的机器容易变砖吗？*
-**答:** 除非你忽略/跳过所有的安全检查，*基本*上不会出现变砖的情况。
+**问：** **破解我的机器容易变砖吗？**
+**答：** 除非你忽略/跳过所有的安全检查，**基本**上不会出现变砖的情况。
-**问:** *我可以通过这个破解来运行自制程序和模拟器吗？*
-**答:** 可以！ 自制固件不仅能运行Homebrew Launcher，还能让你在任何系统版本上都保持破解状态，这也就是说即使你升级了系统，破解依然还是存在的。
+**问：** **我可以通过这个破解来运行自制程序和模拟器吗？**
+**答：** 可以！ 自制固件不仅能运行Homebrew Launcher，还能让你在任何系统版本上都保持破解状态，这也就是说即使你升级了系统，破解依然还是存在的。
-**问:** *我可以通过这个破解来玩别的区域的游戏么？*
-**答:** Luma3DS 支持跨区补丁，这允许你可以安装和运行任何区域的游戏而无需额外的修改。
+**问：** **我可以通过这个破解来玩别的区域的游戏么？**
+**答：** Luma3DS 支持跨区补丁，这允许你可以安装和运行任何区域的游戏而无需额外的修改。
-**问:** *升级自制固件的时候 SysNAND 是否安全？*
-**答:** 是的， 这非常安全，请别再问了。
+**问：** **升级自制固件的时候 SysNAND 是否安全？**
+**答：** 是的， 这非常安全，请别再问了。
-**问:** *我能在哪里获得帮助？*
-**答:** 懂英文的话可以在[Nintendo Homebrew Discord服务器](https://discord.gg/MWxPgEp)上使用英文寻求帮助。（请注意，如果你身处中国大陆，则你可能需要通过科学上网访问Discord），你也可以到译者的QQ群寻求帮助，群号为942052497。
+**问：** **我能在哪里获得帮助？**
+**答：** 懂英文的话可以在[Nintendo Homebrew Discord服务器](https://discord.gg/MWxPgEp)上使用英文寻求帮助。（请注意，如果你身处中国大陆，则你可能需要通过科学上网访问 Discord），你也可以到译者的QQ群寻求帮助，群号为942052497。
-**问:** *我可以使用 4GB 或更小的 SD 卡来完成本教程吗？*
-**答:** 可以！
+**问：** **我可以使用 4GB 或更小的 SD 卡来完成本教程吗？**
+**答：** 可以！
-**问:** *我可以使用 128GB 或更大容量的 SD 卡吗？*
-**答:** 可以，但是有些用户反映使用如此大容量的SD卡会造成速度变慢。 不要将你的内存卡格式化为 exFAT 格式，请格式化为 FAT32 格式。
+**问：** **我可以使用 128GB 或更大容量的 SD 卡吗？**
+**答：** 可以，但是有些用户反映使用如此大容量的SD卡会造成速度变慢。 不要将你的内存卡格式化为 exFAT 格式，请格式化为 FAT32 格式。
-**问:** *完成本教程后，如果我想更换 SD 卡该怎么做？*
-**答:** 把所有原 SD 卡上的所有文件复制到新 SD 卡上即可。
+**问：** **完成本教程后，如果我想更换 SD 卡该怎么做？**
+**答：** 把所有原 SD 卡上的所有文件复制到新 SD 卡上即可。
-**问:** *我可以保留我的 NNID 吗？*
-**答:** 如果你在教程开始之前已经登录了 NNID，并且严格按照教程的步骤进行，完成教程后你的 NNID 还是在的。
+**问：** **我可以保留我的 NNID 吗？**
+**答：** 如果你在教程开始之前已经登录了 NNID，并且严格按照教程的步骤进行，完成教程后你的 NNID 还是在的。
-**问:** *那么软件和资料转移（System Transfers）呢？*
-**答:** 当你完成本教程之后，你可以和另一台做过 boot9strap 破解的 3DS 或 2DS 进行来回迁移，就像你在未破解设备或者 EmuNAND 上进行的那样（在迁移过程中你会丢失所有的非法游戏/主题/DLC；所有（包括丢失的游戏）存档会被保留）。
+**问：** **那么软件和资料转移（System Transfers）呢？**
+**答：** 当你完成本教程之后，你可以和另一台做过 boot9strap 破解的 3DS 或 2DS 进行来回迁移，就像你在未破解设备或者 EmuNAND 上进行的那样（在迁移过程中你会丢失所有的非法游戏/主题/DLC；所有（包括丢失的游戏）存档会被保留）。
-**问:** *没有电脑也能完成本教程吗（例如 用一台安卓手机）？*
-**答:** 只要你能把文件放到 SD 卡上就行！
+**问：** **没有电脑也能完成本教程吗（例如 用一台安卓手机）？**
+**答：** 只要你能把文件放到 SD 卡上就行！
-**问:** *帮帮我！ 我的机子开不了机了……*
-**答:** 参见[问题排查](troubleshooting)。
+**问：** **帮帮我！ 我的机子开不了机了……**
+**答：** 参见[问题排查](troubleshooting)。
diff --git a/_pages/zh_CN/finalizing-setup.txt b/_pages/zh_CN/finalizing-setup.txt
index 8010792482..c501de3b89 100644
--- a/_pages/zh_CN/finalizing-setup.txt
+++ b/_pages/zh_CN/finalizing-setup.txt
@@ -8,29 +8,29 @@ title: "完成安装"
`boot.firm` 文件是 boot9strap 在加载 NAND 之后自行启动的文件，它可以是任意有效的、FIRM格式的 arm9 payload。 你可以随时替换此文件，不过 Luma3DS 允许通过引导菜单加载其他 FIRM 格式的 arm9 payload。
-本教程中，我们将使用 [AuroraWright](https://github.com/AuroraWright/) 制作的 Luma3DS 来直接启动一个破解过的 SysNAND ，完全不用 EmuNAND 并简化破解3DS系统的步骤和节省 SD.卡的空间。
+本教程中，我们将使用 [AuroraWright](https://github.com/AuroraWright/) 制作的 Luma3DS 来直接启动一个破解过的 SysNAND，完全不用 EmuNAND 并简化破解3DS系统的步骤和节省 SD 卡的空间。
在这个过程当中，我们还会安装像下面所示的几个工具：
-+ **FBI** *（用来安装CIA格式的游戏和程序）*
-+ **Anemone3DS** *（安装自定义主题）*
-+ **Checkpoint** *（备份和恢复你 3DS/DS 的游戏存档）*
-+ **Luma3DS Updater** *（用来更新 Luma3DS 固件）*
-+ **GodMode9** *（一款多功能工具，可以处理 NAND 和卡带的相关功能）*
-+ **Homebrew Launcher Loader** *（启动 Homebrew Launcher 的快捷方式）*
-+ **DSP1** *（允许自制程序播放音乐）*
-+ **ctr-no-timeoffset** *（移除 rtc 偏移，让主菜单时间和 rtc 时间匹配）*
++ **FBI（用来安装 CIA 格式的游戏和程序）**
++ **Anemone3DS（安装自定义主题）**
++ **Checkpoint（备份和恢复你 3DS/DS 的游戏存档）**
++ **Luma3DS Updater（用来更新 Luma3DS 固件）**
++ **GodMode9（一款多功能工具，可以处理 NAND 和卡带的相关功能）**
++ **Homebrew Launcher Loader（启动 Homebrew Launcher 的快捷方式）**
++ **DSP1（允许自制程序播放音乐）**
++ **ctr-no-timeoffset（移除 rtc 偏移，让主菜单时间和 rtc 时间匹配）**
### 你需要准备点啥？
-* 最新版 [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(下载 `.cia` 文件)*
-* 最新版 [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *(下载 `.cia` 文件)*
+* 最新版 [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) **（下载 `.cia` 文件）**
+* 最新版 [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest) *（下载 `.cia` 文件）*
* 最新版 [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* 最新版 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* 最新版 [DSP1](https://github.com/zoogie/DSP1/releases/latest)
-* 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) *（下载 `.cia` 和 `.3dsx` 文件）*
+* 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) **（下载 `.cia` 和 `.3dsx` 文件）**
* 最新版 [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
-* 最新版 [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) *（下载后缀为 `.cia` 的文件）*
+* 最新版 [Luma3DS Updater](https://github.com/KunoichiZ/lumaupdate/releases/latest) **（下载后缀为 `.cia` 的文件）**
### 操作步骤
diff --git a/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt b/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt
index 90fd57f5ef..a856d68072 100644
--- a/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt
+++ b/_pages/zh_CN/flashing-ntrboot-(3ds-multi-system).txt
@@ -19,7 +19,7 @@ title: "写入 ntrboot 漏洞（通过多台 3DS）"
* 两台 3DS 主机
+ ** 3DS **：已经破解了 boot9strap 的 3DS
+ ** 目标 3DS **：运行原厂系统的 3DS
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（下载 `ntr` 名字的文件；不要下载 `devkit` 名字的文件）*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `ntr` 名字的文件；不要下载 `devkit` 名字的文件）**
* 最新版 [ntrboot_flasher](https://github.com/ntrteam/ntrboot_flasher/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt
index a75cc6d377..ad9aaf7e28 100644
--- a/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt
+++ b/_pages/zh_CN/flashing-ntrboot-(3ds-single-system).txt
@@ -16,7 +16,7 @@ title: "写入 ntrboot 漏洞（通过单台 3DS）"
### 你需要准备点啥？
* 一张兼容 ntrboot 的烧录卡
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（下载 `ntr` 名字的文件；不要下载 `devkit` 名字的文件）*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `ntr` 名字的文件；不要下载 `devkit` 名字的文件）**
* 最新版 [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/flashing-ntrboot-(dsi).txt b/_pages/zh_CN/flashing-ntrboot-(dsi).txt
index 93d7c58984..2b2c938d8e 100644
--- a/_pages/zh_CN/flashing-ntrboot-(dsi).txt
+++ b/_pages/zh_CN/flashing-ntrboot-(dsi).txt
@@ -19,7 +19,7 @@ title: "写入ntrboot（通过DSi）"
* 两台主机
+ **源 DSi**：与你的烧录卡兼容的 Nintendo DSi
+ **目标 3DS**：运行原版系统的 3DS
-* 最新版 [ds_ntrboot_flasher](https://github/ntrteam/ds_ntrboot_flasher/releases/latest) *（请下载 `dsi` 版本而不是正常的版本）*
+* 最新版 [ds_ntrboot_flasher](https://github/ntrteam/ds_ntrboot_flasher/releases/latest) **（请下载 `dsi` 版本而不是正常的版本）**
### 操作步骤
diff --git a/_pages/zh_CN/flashing-ntrboot-(nds).txt b/_pages/zh_CN/flashing-ntrboot-(nds).txt
index 70eaaa8dc7..fd059a019a 100644
--- a/_pages/zh_CN/flashing-ntrboot-(nds).txt
+++ b/_pages/zh_CN/flashing-ntrboot-(nds).txt
@@ -19,7 +19,7 @@ title: "写入 ntrboot 漏洞（通过 NDS）"
* 两台主机
+ **源 NDS / NDSL**：与你的烧录卡兼容的 Nintendo DS 或 Nintendo DS Lite
+ **目标 3DS**：运行原版系统的 3DS
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（下载 `ntr` 名字的文件；不要下载 `devkit` 名字的文件）*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载 `ntr` 名字的文件；不要下载 `devkit` 名字的文件）**
* 最新版 [ds_ntrboot_flasher](https://github.com/jason0597/ntrboot_flasher_nds/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/get-started.txt b/_pages/zh_CN/get-started.txt
index 39b38947ff..a7495ab3da 100644
--- a/_pages/zh_CN/get-started.txt
+++ b/_pages/zh_CN/get-started.txt
@@ -8,10 +8,6 @@ title: "新手入门"
请在下表中按照你的系统版本选择对应的页面。 需要注意的是，下文中所述 “从” 和 “到” 的版本号之间的任何版本均在适用范围。 举个例子：“从 9.0.0 到 9.2.0 ”表示 9.0.0， 9.1.0，和 9.2.0。
-另外，表格的最后两列对应你版本号的最尾端数字（即你系统上浏览器的版本）。 如果版本号以 -0 结尾，则说明你的主机系统内没有浏览器，如果大于 -0 则表示浏览器已经安装。
-
-比如说，如果你的系统版本是 “5.0.0-0U”，那么你只能使用“从 5.0.0 到 5.1.0 ”的“无浏览器”那一列的教程，因为你的系统版本在那个范围内，而且你没有浏览器 。
-
你可以在系统设置中上屏的右下角找到你的主机版本号。
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -23,7 +19,7 @@ title: "新手入门"
如果你已经破解过你的 3DS，并安装了基于 EmuNAND 的自制系统，那么请切换到 SysNAND 上进行本教程的所有操作。 替换所有已存在的文件。 你的数据将在最后从 EmuNAND 迁移到新的 B9S 系统上。 如果你现在使用的是 menuhax（主题破解），你应该在开始前先[清除主菜单外存](troubleshooting#clear-home-menu-extdata) 。
-本页面将指导你安装 boot9strap 至*原厂尚未破解*的 3DS 或 2DS 上。 如果你已经安装了 arm9loaderhax，并想要升级到 boot9strap，请参考 [A9LH 升级 B9S](a9lh-to-b9s)。
+本页面将指导你安装 boot9strap 至**原厂尚未破解**的 3DS 或 2DS 上。 如果你已经安装了 arm9loaderhax，并想要升级到 boot9strap，请参考 [A9LH 升级 B9S](a9lh-to-b9s)。
{: .notice--primary}
开始前，windows用户需要开启[显示文件后辍](file-extensions-(windows)) 选项！
@@ -33,16 +29,14 @@ title: "新手入门"
{: .notice--warning}
{% capture notice-1 %}
-据消息称，任天堂封禁了大量使用自制固件（CFW）的用户。 为了自保，请在继续教程前先进行如下操作：
+虽然我们认为在此时破解是很安全的一件事，但这并不代表“永远不会受到封禁”。
-1. 进入“系统设置(System Settings)”，点击“互联网设置(Internet Settings)”，然后再点击 “SpotPass”，之后再继续点击“发送系统信息(Sending of System Information)”
-1. 关闭“发送系统信息(Sending of System Information)”选项
-1. 退出系统设置
-1. 打开你的好友列表（主菜单中最上方的[橙色的笑脸]({{ "/images/friend-list-icon.png" | absolute_url }})）
- + 如果出现错误信息并被踢回到主菜单，则好友列表设置可能已被禁用或你的设备无法连接到任天堂服务器（由于封禁或网络问题）
-1. 进入“好友列表设置(Friend List settings)”，然后点击“好友提示设置 (Friend Notification Settings)”，再然后点击“展示正在游玩的游戏 (Show friends what you're playing)”
-1. 关闭“向好友展示正在玩的游戏(Show friends what you're playing)”选项
-1. 退出好友列表
+如果你要防止封禁，则你应该避免做以下事：
+1. 玩盗版
+1. 在联机游戏中作弊
+1. 在 eShop 上做可疑的动作（例如使用信用卡退款）
+
+我们认为目前悄然连接（SpotPass）和擦肩通信（StreetPass）功能也不会受到影响了。
{% endcapture %}
@@ -60,38 +54,37 @@ title: "新手入门"
| 从 |
到 |
- 无浏览器 |
- 有浏览器 |
+ 使用方法 |
| 1.0.0 |
2.0.0 |
- 升级至最新版本或使用“所有版本”方法 |
+ 升级至最新版本或使用“所有版本”方法 |
| 2.1.0 |
8.1.0 |
- 安装 boot9strap（通过Soundhax） |
+ 安装 boot9strap（通过Soundhax） |
| 9.0.0 |
11.3.0 |
- 启动 Homebrew Launcher（通过 Soundhax） |
+ 启动 Homebrew Launcher（通过 Soundhax） |
| 11.4.0 |
- 11.11.0 |
- 升级至最新版本或使用“所有版本”方法 |
+ 11.13.0 |
+ 升级至最新版本或使用“所有版本”方法 |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
所有版本
|
- 安装 bootstrap（通过 ntrboot）
（需要一块兼容的烧录卡） 或 安装 boot9strap（通过硬改）
（需要焊接技术） |
+ 安装 bootstrap（通过 ntrboot）
（需要一块兼容的烧录卡） 或 安装 boot9strap（通过硬改）
（需要焊接技术） |
diff --git a/_pages/zh_CN/godmode9-usage.txt b/_pages/zh_CN/godmode9-usage.txt
index 2a56e399b2..a219431909 100644
--- a/_pages/zh_CN/godmode9-usage.txt
+++ b/_pages/zh_CN/godmode9-usage.txt
@@ -22,7 +22,7 @@ GodMode9 几乎可以修改你主机上的任何东西。 虽然更改系统文
### 你需要准备点啥？
-* 最新版 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### 操作步骤
diff --git a/_pages/zh_CN/home.txt b/_pages/zh_CN/home.txt
index d59b716fbe..e18660ea6c 100644
--- a/_pages/zh_CN/home.txt
+++ b/_pages/zh_CN/home.txt
@@ -9,7 +9,7 @@ header:
excerpt: "最完整的 3DS 破解手册，
教你从原版主机破解成boot9strap。
"
---
-你还可以访问 [Hacks.Guide](https://hacks.guide) 找到其他设备的自制软件和自制固件完整安装教程。
+你还可以访问 [Hacks.Guide](https://hacks.guide/zh_CN/) 找到其他设备的自制软件和自制固件完整安装教程。
{: .notice--primary}
___
@@ -18,7 +18,7 @@ ___
{: .notice--warning}
{% capture notice-1 %}
-本教程 _仅_ 适用于零售版的3DS（市面上销售的；而非通过任天堂开发者计划获得的）！
+本教程**仅**适用于零售版的 3DS（市面上销售的；而非通过任天堂开发者计划获得的）！
如果你的主机是开发版（代号“PANDA”）的，请参见 [Panda 3DS 破解手册](https://panda.hacks.guide)。
{% endcapture %}
@@ -32,7 +32,7 @@ ___
{{ notice-1 | markdownify }}
-请帮帮我们来将[这些]({{ "rss.xml" | absolute_url }})种子做种！
+请帮帮我们把[这些]({{ "rss.xml" | absolute_url }})种子做种！
{: .notice--primary}
## 什么是自制程序？
@@ -81,8 +81,8 @@ Boot9strap 拥有许多其他自制固件所没有的优点，因此我们推荐
+ 此教程对所有区域且固件版本号小于等于 11.13.0 的 New 3DS、3DS、New 2DS 和 2DS 有效。
+ 如果一切顺利，在安装完自制系统后你不会丢失任何数据（包括游戏、NNID、存档等）。
+ 在进行所有操作时请将主机充电，避免意外关机造成数据丢失或损坏！
-+ 你的 SD 卡的分区表格式必须是 [MBR，而不是 GPT](http://www.howtogeek.com/245610/)（原厂 SD 卡的分区表格式默认是 MBR）。
-+ 如果你需要格式化一张新的 SD 卡，可以使用 [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm)，并将“分配单元大小（Allocation Unit Size）”设置为 32K (32768)。
++ 你的 SD 卡的分区表格式必须是 [MBR，而不是 GPT](http://www.howtogeek.com/245610/)（原厂 SD 卡的分区表格式默认是 MBR）。 如果你想测试是否为 MBR 格式，那么，最简单的方法是将其插入 3DS。 如果 SD 卡能被读取，那么它的分区表格式就是 MBR。
++ 如果你需要格式化一张新的 SD 卡，可以使用 [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm)，并将“分配单元大小（Allocation Unit Size）”设置为 32K (32768)。
+ 老型号的 2DS 和 3DS 使用的系统软件几乎是一模一样的，New 2DS 和 New 3DS也是一样的道理。 任何 “老型号的 3DS” 的步骤也适用于“老型号 2DS”，任何 “New 3DS” 的步骤也适用于 “New 2DS”。
___
diff --git a/_pages/zh_CN/homebrew-launcher-(alternatives).txt b/_pages/zh_CN/homebrew-launcher-(alternatives).txt
index 2133cd203d..7a52b4ff81 100644
--- a/_pages/zh_CN/homebrew-launcher-(alternatives).txt
+++ b/_pages/zh_CN/homebrew-launcher-(alternatives).txt
@@ -20,10 +20,10 @@ Homebrew Launcher 有许多不同的入口和启动方式。
* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件)*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
* 最新版 [safehax](https://github.com/TiniVi/safehax/releases/latest)
* 最新版 [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) *( 下载 `.7z` 格式的压缩包文件)*
+* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest) **（下载 `.7z` 格式的压缩包文件）**
### 操作步骤
diff --git a/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt b/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..b3aa535ff0
--- /dev/null
+++ b/_pages/zh_CN/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "启动 Homebrew Launcher（通过 2020 版浏览器破解）"
+---
+
+{% include toc title="目录内容" %}
+
+### 必读事项
+
+这种方法利用了 3DS 互联网浏览器的一些漏洞来启动 Homebrew Launcher。
+
+这些操作可在美、欧、日、韩版的主机上使用，你可通过系统版本号末尾的 U，E，J，K 字符来区分主机版本。 如果你的机子是（港）台或神游版机（系统设置里面显示的版本最后一位为T或C），请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp)，使用英语寻求帮助。
+
+### 你需要准备点啥？
+
+* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* 最新版的浏览器破解压缩文件 [[Old 3DS 请点击这里下载](https://github.com/zoogie/old-browserhax/releases/latest) / [New 3DS 请点击这里下载](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old 指的是你的主机机型。 如果你不确定你是哪一款机型，则你可以看看[这张图](https://3ds.eiphax.tech/pic/newold.png)。
+* 主机已连上 WiFI
+
+### 操作步骤
+
+#### 第一步 — 准备工作
+
+1. 将3DS关机，拔出SD卡
+1. 将 SD 卡插入电脑
+1. 从 Homebrew Launcher 发布页下载 `boot.3dsx`，然后复制到你 SD 卡的根目录。
+ + 根目录指的是你点进 SD 卡看到的目录，你可以在这个目录下看到 Nintendo 3DS 文件夹，但请不要点进去
+1. 在浏览器破解 release 页下载的压缩文件中，打开对应你主机区域的文件夹
+ + 你的主机区域可以在系统设置主界面的上屏右下角找到：U是美版、E是欧版、J是日版、K是韩版。
+1. 从那里复制 `3ds` 文件夹、`browserhax_hblauncher_ropbin_payload.bin` 和 `arm11code.bin` 到 SD 卡根目录
+ + 你的 SD 卡根目录上现在应该有 `Nintendo 3DS` 文件夹、 `3ds` 文件夹和两个 `.bin` 文件了
+
+#### 第二步 — 浏览器破解
+
+1. 打开[这张图片](https://3ds.eiphax.tech/pic/hax.png)
+1. 安全弹出 SD 卡并将其插回主机
+1. 打开你的主机，然后确认其已联上 WiFi。
+1. 在主菜单中，同时按下 L 键和 R 键
+ + 这应该会打开一个二维码扫描器。 如果没有，那么接下来的 USM（破解的下一步）就没办法继续做下去了。 你需要使用 [Seedminer](seedminer) 代替本方法。
+ + 如果你想手输链接，请在浏览器输入 `https://zoogie.github.io/web/nbhax/`
+1. 使用二维码扫描器扫第1步打开的那个二维码
+1. 点击“PROCEED TO HAXX”
+1. 等待该过程执行完成。
+ + 如果黄屏了，请重启主机然后再试一次
+ + 如果出现错误，参见[此故障排查章节](troubleshooting#a-browser-based-exploit-is-not-working)
+1. 如果漏洞成功执行，你的设备将进入到 Homebrew Launcher
+ + 如果你看到一个没有找到任何应用的提示，请重新确认你是否解压了从浏览器破解 release 页下载的压缩文件里的 `3ds` 文件夹，并将其复制到内存卡的根目录，然后再试一次。
+1. 保持主机开启，然后继续下一部分。
+
+
+___
+
+### 继续至[安装 boot9strap（通过 HBL-USM）](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/zh_CN/homebrew-launcher-(soundhax).txt b/_pages/zh_CN/homebrew-launcher-(soundhax).txt
index 88f167cdcb..4f45923305 100644
--- a/_pages/zh_CN/homebrew-launcher-(soundhax).txt
+++ b/_pages/zh_CN/homebrew-launcher-(soundhax).txt
@@ -16,20 +16,20 @@ Soundhax（与 Homebrew Launcher 一起使用时）与欧版、日版、韩版
注意：卡带升级只会更新系统核心组件，如系统设置和桌面菜单等等。 卡带升级不会更新 3DS 的音乐播放器与网络相关的组件，如系统迁移，互联网浏览器， StreetPass Mii 广场和 eShop。
-这也就是说，如果系统本身就安装有旧版本的“任天堂 3DS 音乐（Nintendo 3DS Sound）”程序*（低于3.0.0的版本）*且通过含有新版此程序的卡带进行更新，将导致 Soundhax 漏洞无法正常使用！ 你需要用[其他方法](homebrew-launcher-(alternatives))来进入 Homebrew Launcher！
+这也就是说，如果系统本身就安装有旧版本的“任天堂 3DS 音乐（Nintendo 3DS Sound）”程序**（低于3.0.0的版本）**且通过含有新版此程序的卡带进行更新，将导致 Soundhax 漏洞无法正常使用！ 你需要用[其他方法](homebrew-launcher-(alternatives))来进入 Homebrew Launcher！
{% endcapture %}
{{ notice-1 | markdownify }}
### 你需要准备点啥？
-* 最新版 [Soundhax](http://soundhax.com/) *（根据你的3DS的区域、型号和版本下载）*
+* 最新版 [Soundhax](http://soundhax.com/) **（根据你的 3DS 的区域、型号和版本下载）**
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）*
-* 最新版 [safehax](https://github.com/TiniVi/safehax/releases/latest) *（下载`.3dsx` 文件）*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
+* 最新版 [safehax](https://github.com/TiniVi/safehax/releases/latest) **（下载 `.3dsx` 文件）**
* 最新版 [udsploit](https://github.com/smealum/udsploit/releases/latest)
* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
-* [otherapp payload](https://smealum.github.io/3ds/#otherapp) *（根据你的 3DS 的区域和版本下载）*
+* [otherapp payload](https://smealum.github.io/3ds/#otherapp) **（根据你的 3DS 的区域和版本下载）**
### 操作步骤
diff --git a/_pages/zh_CN/installing-boot9strap-(2xrsa).txt b/_pages/zh_CN/installing-boot9strap-(2xrsa).txt
index 28188b45d3..0cf33849c6 100644
--- a/_pages/zh_CN/installing-boot9strap-(2xrsa).txt
+++ b/_pages/zh_CN/installing-boot9strap-(2xrsa).txt
@@ -7,7 +7,7 @@ title: "安装 boot9strap（通过 2xrsa）"
### 你需要准备点啥？
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件)*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/installing-boot9strap-(browser).txt b/_pages/zh_CN/installing-boot9strap-(browser).txt
index 9f86ef0bd7..8620120a00 100644
--- a/_pages/zh_CN/installing-boot9strap-(browser).txt
+++ b/_pages/zh_CN/installing-boot9strap-(browser).txt
@@ -7,7 +7,7 @@ title: "安装 boot9strap（通过浏览器）"
### 你需要准备点啥？
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/installing-boot9strap-(hardmod).txt b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
index aca0669a01..ad35643237 100644
--- a/_pages/zh_CN/installing-boot9strap-(hardmod).txt
+++ b/_pages/zh_CN/installing-boot9strap-(hardmod).txt
@@ -19,7 +19,7 @@ title: "安装 boot9strap（通过硬改）"
### 你需要准备点啥？
* 通过[硬改](https://gbatemp.net/threads/414498/)导出的 NAND 镜像。
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
* 最新版 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows用户可以使用已编译的 “.exe” 程序，而 Mac 以及 Linux 用户则需要安装 [Python 3](https://www.python.org/downloads/) 来打开 “.py” 文件。
* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
diff --git a/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..ce7633cc64
--- /dev/null
+++ b/_pages/zh_CN/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "安装 boot9strap（通过 HBL-USM）"
+---
+
+{% include toc title="目录内容" %}
+
+### 必读事项
+
+为了破解系统的 SAFE_MODE 固件，我们需要注入一个已被破解的 WiFi 配置文件到主机中。
+
+现在我们能够进入 Homebrew 了，所以接下来我们会使用 slotTool 继续做下去。
+
+你需要需要先做完 [2020 版浏览器破解步骤](homebrew-launcher-(browserhax-2020))才能打开 Homebrew Launcher。
+
+如果你是通过其他方式进入 Homebrew Launcher 的，则你应该使用 [Frogtool](installing-boot9strap-(frogtool)) 而不是本方法。
+
+一旦 WiFi 配置文件被注入，我们将会使用到 SAFE_MODE 来继续此教程。安全模式（SAVE MODE）是一个所有的 3DS 主机都存在的修复功能，之后它将被用于激活被破解的 WiFi 配置文件。
+
+如果你的 L 键、R 键、↑ 键和 A 键中的其中一个按键坏了无法使用，则你只能使用[传统方法](legacy-methods)。 如需帮助，请加入 [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英文求助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网），你也可以到译者的 [QQ 群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为942052497。
+{: .notice--danger}
+
+### 你需要准备点啥？
+
+* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版 [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### 第一步 — 准备工作
+
+1. 你的主机现在应该在本教程的前一部分打开了 Homebrew Launcher 了
+1. 从自制程序列表中找到并启动 slotTool
+ + 如果你的主机卡在了红屏，请按住电源键 15 秒来强制关机，然后重试本步骤
+1. 选择 “INSTALL exploit to wifi slots 1,2,3 & shutdown” 选项
+ + 你应该会看到屏幕上出现了一些文字，然后你的主机就关机了
+1. 从主机拔出 SD 卡，然后将其插入电脑
+1. 解压 Luma3DS `.zip` 里的 `boot.firm` 到你 SD 卡的根目录
+1. 从 unSAFE_MODE `.zip` 复制 `usm.bin` 到 SD 卡的根目录
+1. 将 SD 卡插回主机
+
+#### 第二步 — unSAFE_MODE
+
+1. 将你的主机置于关机状态，按住 L + R + ↑ + A 按键，然后按下电源键
+ + 按住这几个按钮，直到主机进入安全模式
+1. 点击 “OK” 来允许更新
+ + 这个步骤实际上不存在更新。 这只是触发漏洞的一部分
+1. 点击 “I accept（我同意/同意する）”
+1. 更新最终将失败，然后报出 `003-1099` 的错误。 这是剧本中的一部分
+1. 当系统问你“你想要配置互联网设置吗？（Would you like to configure Internet settings?）”时，点击 “Yes”
+1. 在接下来出现的菜单中，移动至 `连接点 1（Connection 1）` -> `更改设置（Change Settings）` -> `下一页（右箭头）` -> `代理设置（Proxy Settings）` -> `详细设置（Detailed Setup）`
+ + 这里有一份[演示图像](https://uwuu.ca/images/safemode_highlighted.png)
+1. 然后你应该会看到上屏提示 `B9S install SUCCESS`，然后你就可以按下任意键重启到 Luma 设置了
+
+#### 第三步 - 设置 Luma3DS
+
+1. 你的主机应该会自动进入到 Luma 配置菜单
+1. 使用方向键和 “A” 键来启用以下设置：
+ + **“Show NAND or user string in System Settings”**
+1. 按下 “Start” 键保存设置并重启
+ + 你的主机应该在一会后加载到系统桌面。 如果你等了超过五分钟还是黑屏，[请参见此故障排查章节](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### 第四步 — 还原 WiFi 配置文件
+
+1. 运行“下载通信(Download Play)”程序
+1. 等到你看到两个按钮
+ + 不要按下任意一个按钮
+1. 同时按下 “L” + “↓” + “Select” 键来打开 Rosalina 菜单
+1. 选择 “Miscellaneous options”
+1. 选择 “Switch the hb. title to the current app.”
+1. 按 “B” 键继续
+1. 按 “B” 键返回 Rosalina 主菜单
+1. 按 “B” 键退出 Rosalina 菜单
+1. 按下 “Home” 键，然后关闭“下载通信(Download Play)”
+1. 重新运行“下载通信（Download Play）”程序
+1. 此时你的主机应该会启动 Homebrew Launcher了
+1. 从自制程序列表中找到并启动 slotTool
+1. 选择“RESTORE original wifi slots 1,2,3”
+1. 你的主机将会重启
+
+___
+
+### 继续至[完成安装](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/zh_CN/installing-boot9strap-(mset).txt b/_pages/zh_CN/installing-boot9strap-(mset).txt
index fc9f3bc4ef..267f881e60 100644
--- a/_pages/zh_CN/installing-boot9strap-(mset).txt
+++ b/_pages/zh_CN/installing-boot9strap-(mset).txt
@@ -8,7 +8,7 @@ title: "安装 boot9strap（通过 MSET）"
* 在你的设备系统版本上能使用的 DS 烧录卡
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
index dcfb1bbd0e..6871a932b7 100644
--- a/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
+++ b/_pages/zh_CN/installing-boot9strap-(ntrboot).txt
@@ -13,7 +13,7 @@ title: "安装boot9strap (通过 ntrboot)"
* 一块用来触发主机的休眠模式的磁铁（只适用于折叠式主机）
* 一张已经写入 ntrboot 漏洞的烧录卡
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件)*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
### 操作步骤
@@ -22,7 +22,7 @@ title: "安装boot9strap (通过 ntrboot)"
1. 将设备关机
1. 将你主机的 SD 卡插入你的电脑
- + 这里指的是 3DS 的 SD 卡，*不*是烧录卡中的 SD 卡
+ + 这里指的是 3DS 的 SD 卡，**不**是烧录卡中的 SD 卡
1. 复制 `SafeB9SInstaller.firm` 到 SD 卡的根目录，并重命名为 `boot.firm`
1. 解压 Luma3DS `.zip` 里的 `boot.3dsx` 到你 SD 卡的根目录
1. 在SD卡根目录创建一个名为 `boot9strap` 的文件夹
@@ -122,7 +122,7 @@ ___
1. 将设备关机
1. 将你的 SD 卡插入到电脑
- + 这指的是 3DS 的 SD 卡，*不* 是烧录卡中的 SD 卡
+ + 这里指的是 3DS 的 SD 卡，**不**是烧录卡中的 SD 卡
1. 在 SD 卡根目录创建一个名为 `ntrboot` 的文件夹
1. 从烧录卡备份 `.zip` 压缩包中复制 `.bin` 文件到你的 SD 卡的 `/ntrboot/` 文件夹
1. 在SD卡的 `luma` 文件夹里创建 `payloads` 文件夹
diff --git a/_pages/zh_CN/installing-boot9strap-(soundhax).txt b/_pages/zh_CN/installing-boot9strap-(soundhax).txt
index 5de70b63cb..8c51b16488 100644
--- a/_pages/zh_CN/installing-boot9strap-(soundhax).txt
+++ b/_pages/zh_CN/installing-boot9strap-(soundhax).txt
@@ -19,12 +19,12 @@ Soundhax（与 pre9otherapp 结合使用时）与欧版、日版、韩版和美
### 你需要准备点啥？
-* 最新版 [Soundhax](http://soundhax.com/) *（根据你的3DS的区域、型号和版本下载）*
+* 最新版 [Soundhax](http://soundhax.com/) **（根据你的 3DS 的区域、型号和版本下载）**
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件)*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
-* 最新版 [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *（下载对应你固件版本的 `.bin` 文件）*
+* 最新版 [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) **（下载对应你固件版本的 `.bin` 文件）**
### 操作步骤
diff --git a/_pages/zh_CN/installing-boot9strap-(usm).txt b/_pages/zh_CN/installing-boot9strap-(usm).txt
index 0ca9974f89..5d6e462300 100644
--- a/_pages/zh_CN/installing-boot9strap-(usm).txt
+++ b/_pages/zh_CN/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ title: "安装 boot9strap（通过 USM）"
#### 第一步 — 准备工作
1. 在你的电脑上打开 [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/)
+ + 如果这个网站抛锚了，尝试[这个网站](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. 点击 “选择文件” 选项，然后选择你的 movable.sed 上传
1. 点击 “Download unSAFE_MODE-bb3 archive”
+ 这将下载一个包含了名为 `F00D43D5.bin` 的已被破解的 DSiWare 备份和一个名为 `usm.bin` 的已被破解的 SAFE_MODE 存档文件的 zip 文件（`unSAFE_MODE-bb3.zip`）到你的电脑上
diff --git a/_pages/zh_CN/legacy-methods.txt b/_pages/zh_CN/legacy-methods.txt
index 65ec2d2401..42f859b4e5 100644
--- a/_pages/zh_CN/legacy-methods.txt
+++ b/_pages/zh_CN/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "传统方法"
安装自制固件（CFW）在近期出现了许多的改进和进步的方法。
-为此，建议你在 [Seedminer](seedminer) 页面中查找并使用最新的方法。
+为此，建议你在 [Get Started](get-started) 页面中查找并使用最新的方法。
然而，由于某些情况这里仍然保留了一些“传统”或“过时”的方法。 你需要先完成 [Seedminer](seedminer) 部分。
diff --git a/_pages/zh_CN/move-emunand.txt b/_pages/zh_CN/move-emunand.txt
index 7f55fb50f0..bc3e3f70a8 100644
--- a/_pages/zh_CN/move-emunand.txt
+++ b/_pages/zh_CN/move-emunand.txt
@@ -16,7 +16,7 @@ title: "迁移EmuNAND数据"
### 你需要准备点啥？
* 已有 EmuNAND 分区
-* 最新版 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest)
### 操作步骤
diff --git a/_pages/zh_CN/ntrboot.txt b/_pages/zh_CN/ntrboot.txt
index 6caaf7a3f5..52358539e0 100644
--- a/_pages/zh_CN/ntrboot.txt
+++ b/_pages/zh_CN/ntrboot.txt
@@ -17,23 +17,23 @@ title: "ntrboot"
| 烧录卡名 | 目前价格 | 有无 “Time Bomb”？ | 3DS版本？ | DSi版本？ | 备注 |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | 15.99 美元 | 2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | **自带 ntrboot**，可刷回 NDS 烧录卡。 |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | 19.99 美元 | 否 | 11.13.0 或更低 | 1.4.5 或更低 | **自带ntrboot**（[支持切换 ntrboot 和 NDS 模式]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})），请勿手动刷入 ntrboot。 |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | 20.99美元 | 无 | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | 9.99 美元 | 否 | 无 | 无 | 只有一些带有[特定 flash 芯片型号](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6)的烧录卡兼容 ntrboot。 |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | 19.99 美元 | 否 | 11.13.0 或更低| 1.4.5 或更低 | 支持所有 RTS 修订版本。 |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | 13.99 美元 | 1.87：2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | 9.99 美元 | 3.9b：2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | 所有 R4iSDHC 20XX 烧录卡相同。 不支持 2013 版本。 |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | 13.99 美元 | 3.9b：2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | 所有 R4iSDHC 20XX 烧录卡相同。 不支持 2013 版本。 |
-| **Ace3DS X** | | 否 | 11.13.0 或更低 | 1.4.5 或更低 | **自带 ntrboot**（使用外部开关可在ntrboot（“3DS”）和 NDS 模式间切换，请勿手动刷入 ntrboot。 |
-| **Ace3DS Plus** | | 无 | 11.13.0 或更低| 1.4.5 或更低| |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 不支持 2013 版本。 |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 不支持 2013 版本。 |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | 无 | 4.1.0 - 4.5.0 | 1.4.5 或更低 | |
-| **Infinity 3 R4i** | | 否 | 11.13.0 或更低 | 1.4.5 或更低 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | 无 | 无 | 无 | |
| **R4i Gold 3DS Deluxe "Starter"** | | 无 | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | 无 | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | 未知 | 11.13.0 或更低 | 1.4.5 或更低 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b：2019年9月3日 | 11.13.0 或更低 | 1.4.5 或更低 | 所有 R4iSDHC 20XX 烧录卡相同。 |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/zh_CN/region-changing.txt b/_pages/zh_CN/region-changing.txt
index b7ff09277a..ff4d91cb10 100644
--- a/_pages/zh_CN/region-changing.txt
+++ b/_pages/zh_CN/region-changing.txt
@@ -29,8 +29,8 @@ title: "区域变更"
### 你需要准备点啥？
-* 最新版 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
-* 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) *（下载 `.3dsx` 文件）*
+* v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
+* 最新版 [FBI](https://github.com/Steveice10/FBI/releases/latest) **（下载 `.3dsx` 文件）**
* 依据你想要切换到的区域选择合适的 CTR 转移（CTRTransfer）镜像:
+ - [New 3DS 或 New 2DS - 11.5.0 - 欧版 - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
+ - [New 3DS 或 New 2DS - 11.5.0 - 日版 - CTRTransfer](magnet:?xt=urn:btih:70f641c9f2a4933a07fac49eb7ad19451c7c8c96&dn=11.5.0-38J_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/zh_CN/seedminer.txt b/_pages/zh_CN/seedminer.txt
index 25e9d1b0ec..4d42635b82 100644
--- a/_pages/zh_CN/seedminer.txt
+++ b/_pages/zh_CN/seedminer.txt
@@ -12,25 +12,11 @@ title: "Seedminer"
如果这个密钥是完全随机生成的，那么加密密钥将不可能被破解出来。 幸运的是，密钥的前半部分（`movable_part1.sed`）与你的设备的朋友代码（Friend code）有着一些关系，使我们能够破解加密。 如果想要了解 Seedminer 是怎么工作的，请参见此[介绍资料](https://zoogie.github.io/web/34⅕c3)。
-本教程需要利用一个高性能的显卡来进行一些计算。 不过有一个志愿者网站可以帮助你做需要显卡的步骤。（不过在中国大陆地区由于无法使用谷歌服务，你需要通过科学上网才能正常使用网站提供的功能）
+本教程需要利用一个高性能的显卡来进行一些计算。 不过有一个志愿者网站可以帮助你做需要显卡的步骤。
### 操作步骤
-#### 第一步 — 兼容性测试
-
-虽然这些测试不是为了触发 Seedminer 漏洞而必须要做的。但是如果不进行测试的话可能会因为 Seedminer 漏洞在你的主机失效而白白浪费时间并可能会无法使用其他的漏洞。
-
-这里有多种不同的方法启动 Seedminer 漏洞，所以即使这个测试失败了，你仍然可以使用其他的方法
-
-#### DSiWare 数据管理测试（用于 unSAFE_MODE）
-
-1. 转到系统设置，然后点击数据管理（Data Management），然后点击 “DSiWare”
-1. 如果你的主机没有崩溃，那么表示测试成功了
- + 如果主机发生了崩溃并回到了主菜单， 那么测试失败，你只能使用在本页底部的“传统方法”破解
- + 如果您在主机闪退到主菜单之前看到了彩色的屏幕，请加入[Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) 并使用英语请求帮助（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网）你也可以到译者的[QQ群](https://jq.qq.com/?_wv=1027&k=5CfEA4c)寻求帮助，群号为 942052497。
-1. 退出至主菜单
-
-#### 第二步 — 准备工作
+#### 第一步 — 准备工作
1. 将你的 SD 卡插入到电脑
1. 打开你 SD 卡的 `Nintendo 3DS` 文件夹
@@ -52,11 +38,12 @@ title: "Seedminer"
+ 如果出现错误信息并被踢回到主菜单，则你需要创建一个 Mii 形象或你的设备无法连接到任天堂服务器（由于封禁或网络问题）
1. 找到你的 Mii 个人形象，然后在上屏寻找你的“朋友代码（Friend Code）”
-#### 第三步 — Seedminer
+#### 第二步 — Seedminer
1. 在你的电脑上打开 [Bruteforce Movable](https://seedminer.hacks.guide/)
+ 这个网站可以自动替你获取 `movable_part1.sed` 文件（通过一台由机器人操控的 3DS），并破解你主机的 DSiWare 密钥（通过某自愿者的电脑运行 Seedminer 取得）
- + 如果自助功能无法使用，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并使用英文请求帮助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网）你也可以到译者的QQ群寻求帮助，群号为 942052497。
+ + 如果这个网站抛锚了，尝试[这个网站](https://bfm.nintendohomebrew.com/)
+ + 如果这两个网站都无法使用了，请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并使用英文请求帮助。（请注意，如果你身处中国大陆，访问 Discord 可能需要科学上网）你也可以到译者的QQ群寻求帮助，群号为 942052497。
1. 在 “Your friend code” 选项填入你设备的 “朋友代码（Friend Code）”（只要数字，不要填入空格或破折号）
1. 在 “Your ID0” 栏位粘贴之前复制的 32 位长的字符串
+ 不要尝试手动输入 ID0， 确保那是你在上一节中复制并粘贴的 ID0 以防复制错了
@@ -79,7 +66,7 @@ ___
这种将使用 Seedminer 进行进一步破解的方法使用了你的 `movable.sed` 来利用所有机型都有的 SAFE_MODE 固件来进行破解系统。
-这种方法与所有区域兼容，尽管神游机因为阉割了此部分所需内容并不能执行这个操作
+这个方法对除港（台）和神游版机以外的所有区域兼容。
继续至[安装 boot9strap（通过 USM）](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/zh_CN/site-navigation.txt b/_pages/zh_CN/site-navigation.txt
index 8eb59a3989..956ec2b15a 100644
--- a/_pages/zh_CN/site-navigation.txt
+++ b/_pages/zh_CN/site-navigation.txt
@@ -8,8 +8,8 @@ sitemap: false
**热门**
+ [完成安装](finalizing-setup)
-+ [启动 Homebrew Launcher(通过Soundhax)](homebrew-launcher-(soundhax))
-+ [安装 boot9strap（通过 unSAFE_MODE）](installing-boot9strap-(usm))
++ [启动 Homebrew Launcher（通过Soundhax）](homebrew-launcher-(soundhax))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -41,7 +41,7 @@ sitemap: false
+ [启动 Homebrew Launcher（通过 Soundhax）](homebrew-launcher-(soundhax))
+ [启动 Homebrew Launcher（通过 Steelhax）](homebrew-launcher-(steelhax))
+ [安装 boot9strap（通过 2xrsa）](installing-boot9strap-(2xrsa))
-+ [安装 boot9strap (通过浏览器)](installing-boot9strap-(browser))
++ [安装 boot9strap（通过浏览器）](installing-boot9strap-(browser))
+ [安装 boot9strap（通过 Fredtool）](installing-boot9strap-(fredtool))
+ [安装 boot9strap（通过 Frogtool）](installing-boot9strap-(frogtool))
+ [安装 boot9strap（通过拆机硬改）](installing-boot9strap-(hardmod))
@@ -50,6 +50,7 @@ sitemap: false
+ [安装 boot9strap （通过 SafeB9SInstaller）](installing-boot9strap-(safeb9sinstaller))
+ [安装 boot9strap（通过 Soundhax）](installing-boot9strap-(soundhax))
+ [安装 boot9strap（通过 unSAFE_MODE）](installing-boot9strap-(usm))
++ [安装 boot9strap（通过 HBL-USM）](installing-boot9strap-(hbl-usm))
+ [迁移 EmuNAND 数据](move-emunand)
+ [ntrboot](ntrboot)
+ [区域变更](region-changing)
diff --git a/_pages/zh_CN/troubleshooting.txt b/_pages/zh_CN/troubleshooting.txt
index 6a8dc6cfe8..90f95ee037 100644
--- a/_pages/zh_CN/troubleshooting.txt
+++ b/_pages/zh_CN/troubleshooting.txt
@@ -18,7 +18,7 @@ title: "故障排查"
### 你需要准备点啥？
-* 最新版 [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) *（下载 .3dsx 文件）*
+* 最新版 [TWLFix-CFW](https://github.com/MechanicalDragon0687/TWLFix-CFW/releases/latest) **（下载 .3dsx 文件）**
### 操作步骤
diff --git a/_pages/zh_CN/uninstall-cfw.txt b/_pages/zh_CN/uninstall-cfw.txt
index 644c77785d..77864abbcd 100644
--- a/_pages/zh_CN/uninstall-cfw.txt
+++ b/_pages/zh_CN/uninstall-cfw.txt
@@ -14,7 +14,7 @@ title: "卸载自制固件"
你将无法游玩任何已安装且未签名（盗版）的游戏，请在开始本章教程之前进入系统设置内的数据管理中将它们全部删除。 你可以使用 [save manager](https://github.com/FlagBrew/Checkpoint/releases/latest) 来备份你想要备份的未签名（盗版）游戏存档。
-这不会影响你的 NNID和正版游戏，以及正版游戏的存档。
+这不会影响你的 NNID 和正版游戏，以及正版游戏的存档。
如果你之前修改过系统的重要文件（比如修改主菜单，解除你主机的封禁等），卸载自制系统可能会导致你的设备砖机！
{: .notice--danger}
@@ -23,7 +23,7 @@ title: "卸载自制固件"
### 你需要准备点啥？
-* 最新版 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* v1.9.2pre1 版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### 操作步骤
@@ -42,12 +42,12 @@ title: "卸载自制固件"
+ 在 “New 3DS” 主机上，(X) 应该是2
+ 在“老型号的3DS” 上，(X) 应该是0
1. 选择 `.app` 文件
-1. 选择 `NCCH Image Options`
+1. 选择 `NCCH image options`
1. 选择 `Mount image to drive`
1. 在弹出的窗口中，打开 `exefs` 文件夹
1. 在此文件夹中，选中 `.firm` 文件
-1. 选择 “Firm Image Options”
-1. 选择 “Boot Firm”
+1. 选择 “FIRM image options”
+1. 选择 “Boot FIRM”
1. 出现提示时，按下“A”键解密并制作副本
1. 你应该会启动到正常的 3DS 主菜单。 如果是这样，关闭你的主机并继续下一章节。
+ 如果你没有进入到正常的 3DS主菜单，继续下面的步骤将 **会** 导致你的机器变砖。 请加入 [Nintendo Homebrew Discord 服务器](https://discord.gg/MWxPgEp) 并使用英文来请求支援。你也可以到译者的QQ群寻求帮助，群号为 942052497。
@@ -85,5 +85,5 @@ ___
所有自制固件都已经被卸载了。
{: .notice--success}
-你可以将*除了*“Nintendo 3DS” 和 “DCIM” 以外的文件、文件夹从 SD 卡根目录删除。
+你可以将**除了**“Nintendo 3DS” 和 “DCIM” 以外的文件、文件夹从 SD 卡根目录删除。
{: .notice--info}
diff --git a/_pages/zh_CN/updating-b9s.txt b/_pages/zh_CN/updating-b9s.txt
index c763b23ec3..65bf41b940 100644
--- a/_pages/zh_CN/updating-b9s.txt
+++ b/_pages/zh_CN/updating-b9s.txt
@@ -27,7 +27,7 @@ title: "更新 B9S"
### 你需要准备点啥？
* 最新版 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
-* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件)*
+* 最新版 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) **（下载标准的 boot9strap 压缩包文件，而不是带有 `devkit` 或 `ntr` 名字的文件）**
* 最新版 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
* 最新版 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
diff --git a/_pages/zh_TW/a9lh-to-b9s.txt b/_pages/zh_TW/a9lh-to-b9s.txt
index fd86aeea77..4f896a0b8d 100644
--- a/_pages/zh_TW/a9lh-to-b9s.txt
+++ b/_pages/zh_TW/a9lh-to-b9s.txt
@@ -42,7 +42,7 @@ title: "升級 A9LH 至 B9S"
{: .notice--info}
* - **僅適用於 New 3DS 用戶:** [secret_sector.bin](magnet:?xt=urn:btih:15a3c97acf17d67af98ae8657cc66820cc58f655&dn=secret_sector.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
* 7.0.5 版的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/tag/v7.0.5) *(`.7z` 檔案)*
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)*
@@ -58,7 +58,7 @@ title: "升級 A9LH 至 B9S"
1. 關閉您的主機
1. 將 SD 卡插入至電腦中
1. 將 `boot.3dsx` 複製到 SD 卡根目錄中
-1. Copy `boot.firm` from the latest version Luma3DS `.zip` to the root of your SD card
+1. 解壓最新版 Luma3DS `.zip` 內的 `boot.firm` 到 SD 卡的根目錄底下
1. 解壓 v7.0.5 Luma3DS `.7z` 內的 `arm9loaderhax.bin` 到 SD 卡的根目錄底下
1. 刪除所有在您 SD 卡 `/luma/payloads/` 資料夾中的 `.bin` payload 檔案，因為它們將無法與 boot9strap 版本的 Luma3DS 相容
1. 解壓 SafeB9SInstaller`.zip` 中的 `SafeB9SInstaller.bin` 到 SD 中的 `/luma/payloads/` 下
@@ -80,7 +80,7 @@ title: "升級 A9LH 至 B9S"
+ 如果您遇到『OTP Crypto Fail』的錯誤訊息，請下載 - [aeskeydb.bin](magnet:?xt=urn:btih:d25dab06a7e127922d70ddaa4fe896709dc99a1e&dn=aeskeydb.bin&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce), then put it in the `/boot9strap/` folder on your SD card and try again
1. 出現提示時，輸入提示的按鍵組合以安裝 boot9strap
1. 過程結束後，按下『A』重啟主機
- + If your device shuts down on boot, ensure that you have copied `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+ + 如果您的主機在啟動時直接關機，請確保您已經將 Luma3DS `.zip` 中的 `boot.firm` 複製到您的 SD 卡根目錄中
#### 第三節 — 設定 Luma3DS
diff --git a/_pages/zh_TW/bannerbomb3.txt b/_pages/zh_TW/bannerbomb3.txt
index ba0a7442e4..4a335f40c1 100644
--- a/_pages/zh_TW/bannerbomb3.txt
+++ b/_pages/zh_TW/bannerbomb3.txt
@@ -6,9 +6,9 @@ title: "BannerBomb3"
### 必讀事項
-To dump system DSiWare, we exploit a flaw in the DSiWare Data Management window of the Settings application.
+為了導出系統的 DSiWare 軟體， 我們使用了在系統設定內的 DSiWare 數據管理視窗的一個漏洞。
-To accomplish this, we use your system's encryption key (movable.sed) to build a DSiWare backup that exploits the system in order to dump the DSi Internet Settings application to the SD root.
+為了做到這一點，我們將使用你裝置的系統加密金鑰 (movable.sed) 來建構一個可使用的 DSiWare 系統備份，以便將 DSi 網路設定程式導出到 SD 卡的根目錄。
These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version.
diff --git a/_pages/zh_TW/ctrtransfer.txt b/_pages/zh_TW/ctrtransfer.txt
index 3923be481f..5a8623e4db 100644
--- a/_pages/zh_TW/ctrtransfer.txt
+++ b/_pages/zh_TW/ctrtransfer.txt
@@ -17,7 +17,7 @@ title: "CTRTransfer"
### 必備項目
-* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* 最新版的 [FBI 管理器](https://github.com/Steveice10/FBI/releases/latest) *(`.3dsx` 檔案)*
* 對應您主機地區及型號的 11.5.0 CTRTransfer 鏡像檔
*(如果您的主機不屬下列區域內，挑一個符合您主機型號的即可)*:
diff --git a/_pages/zh_TW/finalizing-setup.txt b/_pages/zh_TW/finalizing-setup.txt
index c29fa9b5ab..22a5d32fa2 100644
--- a/_pages/zh_TW/finalizing-setup.txt
+++ b/_pages/zh_TW/finalizing-setup.txt
@@ -26,7 +26,7 @@ title: "完成安裝"
* 最新版的 [Anemone3DS](https://github.com/astronautlevel2/Anemone3DS/releases/latest) *(`.cia` 檔案)*
* 最新版的 [Checkpoint](https://github.com/FlagBrew/Checkpoint/releases/latest)*(`.cia` 檔案)*
* 最新版的 [Homebrew Launcher Wrapper](https://github.com/mariohackandglitch/homebrew_launcher_dummy/releases/latest)
-* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* 最新版的 [DSP1](https://github.com/zoogie/DSP1/releases/latest)
* 最新版的 [FBI 管理器](https://github.com/Steveice10/FBI/releases/latest) *(`.cia` 及 `.3dsx` 檔案)*
* 最新版本的 [ctr-no-timeoffset](https://github.com/ihaveamac/ctr-no-timeoffset/releases/latest)
diff --git a/_pages/zh_TW/get-started.txt b/_pages/zh_TW/get-started.txt
index 4f8f44a9fa..b5ef07813a 100644
--- a/_pages/zh_TW/get-started.txt
+++ b/_pages/zh_TW/get-started.txt
@@ -8,10 +8,6 @@ title: "新手入門"
請於下表中選擇與您系統版本相符的頁面。 請注意，在『從』和『到』區域中的任何版本將包括在內。 比方說，『從 9.0.0 到 9.2.0』，包括著9.0.0版、9.1.0版和 9.2.0版。
-另外請注意，表格的最後兩列可以參考您系統版本結尾的數字 (此為系統安裝的瀏覽器版本)。 若系統版本結尾為『-0』，這就表示您系統並未安裝瀏覽器；若為任何其他大於『-0』的數字，這就表示您系統已安裝瀏覽器。
-
-舉例來說，版本 5.0.0-0U 將到『無瀏覽器』行及『5.0.0 到 5.1.0』列，因為此系統版本是在 5.0.0 到 5.1.0 間，且沒有安裝網頁瀏覽器。
-
主機版本可以在『系統設置 (System Settings)』中的上方螢幕的右下角找到。
![]({{ "/images/screenshots/system-version.png" | absolute_url }})
@@ -33,16 +29,14 @@ title: "新手入門"
{: .notice--warning}
{% capture notice-1 %}
-近日有許多的自製韌體用戶已經被任天堂封殺。 為了自保，請在遵循本教學前進行以下防護措施：
+While we believe custom firmware is relatively safe at this time, it is important to note that it will never be "ban free".
-1. 進入『系統設定(System Settings)』、『網路設定(Internet Settings)』、『SpotPass』、『回傳系統訊息(Sending of System Information)』
-1. 禁用『回傳系統訊息(Sending of System Information)』
-1. 退出系統設定
-1. 開啟您的好友清單 (HOME 主選單中最上方的[橘色笑臉圖示]({{ "/images/friend-list-icon.png" | absolute_url }}))
- + 如果您遇到錯誤訊息且從清單中被踢回主選單，那麼可能您已將好友清單設定關閉或您的主機無法連線至任天堂伺服器 (您可能已被封殺或網路連線之問題)
-1. 進入好友選單設定、『好友提示設定 (Friend Notification Settings)』、『顯示正在遊玩的遊戲 (Show friends what you're playing)』
-1. 禁用『顯示正在遊玩的遊戲(Show friends what you're playing)』
-1. 退出好友清單
+You should avoid the following actions:
+1. Piracy
+1. Cheating online
+1. Suspicious behaviour on eShop (for example, credit card chargebacks)
+
+We believe SpotPass and StreetPass are also safe for use at this time.
{% endcapture %}
@@ -60,38 +54,37 @@ title: "新手入門"
| 從 |
到 |
- 無瀏覽器 |
- 瀏覽器 |
+ 使用方法 |
| 1.0.0 |
2.0.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 升級至最新版本或使用『任意版本』的方法 |
| 2.1.0 |
8.1.0 |
- 安裝 boot9strap (透過 Soundhax) |
+ 安裝boot9strap (透過 Soundhax) |
| 9.0.0 |
11.3.0 |
- Homebrew Launcher (透過 Soundhax) |
+ Homebrew Launcher (Soundhax) |
| 11.4.0 |
- 11.11.0 |
- Update to latest firmware or use an "All Versions" Method |
+ 11.13.0 |
+ 升級至最新版本或使用『任意版本』的方法 |
- | 11.12.0 |
- 11.13.0 |
- Seedminer |
+ 11.14.0 |
+ 11.14.0 |
+ Seedminer |
任意版本
|
- 安裝 boot9strap (透過 ntrboothax)
(需使用可相容的燒錄卡) or 安裝 boot9strap (透過硬改)
(需焊接) |
+ 安裝 boot9strap (透過 ntrboothax)
(需使用可相容的燒錄卡) or 安裝 boot9strap (透過硬改)
(需焊接) |
diff --git a/_pages/zh_TW/godmode9-usage.txt b/_pages/zh_TW/godmode9-usage.txt
index bd2e73aad3..283d16c748 100644
--- a/_pages/zh_TW/godmode9-usage.txt
+++ b/_pages/zh_TW/godmode9-usage.txt
@@ -22,7 +22,7 @@ GodMode9 是個強大且可修改您主機的資料的一套軟體。 雖然您
### 必備項目
-* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### 操作說明
diff --git a/_pages/zh_TW/home.txt b/_pages/zh_TW/home.txt
index 15c15a471b..27cac681c5 100644
--- a/_pages/zh_TW/home.txt
+++ b/_pages/zh_TW/home.txt
@@ -37,7 +37,8 @@ ___
## 什麼是自製程式 (Homebrew)？
-[**Homebrew**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games) usually refers to software that is not authorized by Nintendo. 這包括自製工具、應用程式、遊戲和模擬器。
+[**自製程式**](https://en.wikipedia.org/wiki/List_of_homebrew_video_games)
+ (Homebrew) 通常是指未經由任天堂所授權之軟體。 這包括自製工具、應用程式、遊戲和模擬器。
在許多情況下，在您主機上運行自製程式是完全免費的，只需要透過 3DS 的音樂播放器就可以了。除此之外，也有其他方式可以用來運行自製程式，像是透過其他遊戲或 3DS 瀏覽器的漏洞。
@@ -83,8 +84,8 @@ boot9strap 是目前最新且最棒的自製韌體啟動方式，有點像 Wii
+ This guide will work on New 3DS, Old 3DS, New 2DS, and Old 2DS in all regions on firmware 11.13.0 or below.
+ 如果一切都順利的話，您將不會失去任何資料 (像是遊戲、NNID、存檔... 等都會被留下)。
+ 請在充電的情況下改機，以確保途中不會因為電力關係而突然關機造成資料遺失或甚至毀損！
-+ 您的 SD 卡應為 [MBR 格式，而非 GPT](http://www.howtogeek.com/245610/) (原廠 SD 卡一律都是以 MBR 格式出廠)。
-+ 如果您需要格式化一張新的 SD 卡，您可使用 [guiformat](http://www.ridgecrop.demon.co.uk/index.htm?guiformat.htm) 並且將其配置單位設為 32K (32768)。
++ 您的 SD 卡應為 [MBR 格式，而非 GPT](http://www.howtogeek.com/245610/) (原廠 SD 卡一律都是以 MBR 格式出廠)。 The easiest way to test this is to check if the SD card works in your 3DS. If it works, the SD card is MBR.
++ If you need to format a brand new SD card, you can use [guiformat](http://ridgecrop.co.uk/index.htm?guiformat.htm) and set to an Allocation Unit Size of 32K (32768).
+ 舊型 2DS 與舊型 3DS 的軟體是幾乎一樣的；New 2DS 與 New 3DS 也是同樣的道理。 因此，任何提及「舊型 3DS」的步驟將套用於「舊型 2DS」；而任何提及「New 3DS」的步驟也將套用於「New 2DS」。
___
diff --git a/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt b/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt
new file mode 100644
index 0000000000..0d9d670454
--- /dev/null
+++ b/_pages/zh_TW/homebrew-launcher-(browserhax-2020).txt
@@ -0,0 +1,54 @@
+---
+title: "Homebrew Launcher (BrowserHax 2020)"
+---
+
+{% include toc title="條目內容" %}
+
+### 必讀事項
+
+This method of accessing the Homebrew Launcher takes advantage of some browser oversights in the native 3DS Internet Browser.
+
+These instructions work on USA, Europe, Japan, and Korea region consoles as indicated by the letters U, E, J, or K after the system version. If you have a Taiwan or China region console as indicated by the letters T or C after the system version, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+
+### 必備項目
+
+* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
+* The latest release archive of BrowserHax [[for Old 3DS](https://github.com/zoogie/old-browserhax/releases/latest) / [for New 3DS](https://github.com/zoogie/new-browserhax/releases/latest)]
+ + New/Old refers to the model of your console. If you are unsure of which model you have, consult [this image](https://3ds.eiphax.tech/pic/newold.png)
+* An active WiFi connection on your console
+
+### 操作說明
+
+#### 第一節 — 準備工作
+
+1. Power off your console and remove the SD card
+1. Connect the SD card to your computer
+1. Copy `boot.3dsx` from the Homebrew Launcher release to the root of your SD card
+ + The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it
+1. In the BrowserHax release archive, open the folder corresponding to your console's region
+ + Your console's region can be found in the final letter of the system version in System Settings: U is USA, E is EUROPE, J is JAPAN, and K is KOREA
+1. Copy the `3ds` folder, `browserhax_hblauncher_ropbin_payload.bin` and `arm11code.bin` from there to the root of your SD card
+ + You should now have a `Nintendo 3DS` folder, a `3ds` folder and the two `.bin` files on your root directory
+
+#### Section II - BrowserHax
+
+1. Open [this image](https://3ds.eiphax.tech/pic/hax.png) in a new tab or window on your computer
+1. Safely remove your SD card from your computer and put it back in your console
+1. Power on your console and ensure it is connected to an active WiFi network
+1. From the HOME Menu, press the Left Shoulder and Right Shoulder buttons together
+ + This should open a QR Scanner. If it does not, USM (the next part of getting custom firmware) will not work for you. You will need to use [Seedminer](seedminer)
+ + If you need to type out the URL, it is `https://zoogie.github.io/web/nbhax/`
+1. Use the QR scanner to scan the QR code you opened in the first step
+1. Tap the "PROCEED TO HAXX" button
+1. 等待程序完畢為止
+ + If it displays a yellow screen, power your console off, then try this section again
+ + 如果遇到錯誤的話， [請依循此疑難排解之步驟](troubleshooting#a-browser-based-exploit-is-not-working)
+1. 如果漏洞成功執行，您的主機將自動載入 Homebrew Launcher
+ + If you see an error stating that no applications were found, ensure that you have copied the `3ds` folder from the BrowserHax release archive to the root of your SD card, then try this section again
+1. Leave your console on and proceed to the next section below
+
+
+___
+
+### Continue to [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+{: .notice--primary}
\ No newline at end of file
diff --git a/_pages/zh_TW/homebrew-launcher-(soundhax).txt b/_pages/zh_TW/homebrew-launcher-(soundhax).txt
index 0ee4b00e15..b72ea61b15 100644
--- a/_pages/zh_TW/homebrew-launcher-(soundhax).txt
+++ b/_pages/zh_TW/homebrew-launcher-(soundhax).txt
@@ -28,7 +28,7 @@ Soundhax (與 Homebrew Launcher 使用時) 可與韌體版本 9.0.0 至 11.3.0
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)*
* 最新版的 [safehax](https://github.com/TiniVi/safehax/releases/latest) *(`.3dsx` 檔案)*
* 最新版的 [udsploit](https://github.com/smealum/udsploit/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
* [otherapp payload 檔案](https://smealum.github.io/3ds/#otherapp) *(選擇對應您主機的區域及型號的檔案)*
### 操作說明
diff --git a/_pages/zh_TW/installing-boot9strap-(2xrsa).txt b/_pages/zh_TW/installing-boot9strap-(2xrsa).txt
index 33ce7e9388..116d4203ee 100644
--- a/_pages/zh_TW/installing-boot9strap-(2xrsa).txt
+++ b/_pages/zh_TW/installing-boot9strap-(2xrsa).txt
@@ -8,7 +8,7 @@ title: "安裝 boot9strap (透過 2xrsa)"
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
### 操作說明
diff --git a/_pages/zh_TW/installing-boot9strap-(browser).txt b/_pages/zh_TW/installing-boot9strap-(browser).txt
index bc285aa367..ca87644d95 100644
--- a/_pages/zh_TW/installing-boot9strap-(browser).txt
+++ b/_pages/zh_TW/installing-boot9strap-(browser).txt
@@ -8,7 +8,7 @@ title: "安裝 boot9strap (透過網頁瀏覽器)"
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
### 操作說明
diff --git a/_pages/zh_TW/installing-boot9strap-(fredtool).txt b/_pages/zh_TW/installing-boot9strap-(fredtool).txt
index 0fb9a54c18..b616098b18 100644
--- a/_pages/zh_TW/installing-boot9strap-(fredtool).txt
+++ b/_pages/zh_TW/installing-boot9strap-(fredtool).txt
@@ -16,7 +16,7 @@ This method of using Seedminer for further exploitation uses your `movable.sed`
* 您自 [Seedminer](seedminer) 步驟中所取得的 `movable.sed` 檔案
* 最新版的 [Frogminer_save](https://github.com/zoogie/Frogminer/releases/latest)
* 最新版的 [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
#### 第一節 — 準備工作
diff --git a/_pages/zh_TW/installing-boot9strap-(frogtool).txt b/_pages/zh_TW/installing-boot9strap-(frogtool).txt
index d348dd8504..4cf390d673 100644
--- a/_pages/zh_TW/installing-boot9strap-(frogtool).txt
+++ b/_pages/zh_TW/installing-boot9strap-(frogtool).txt
@@ -18,7 +18,7 @@ title: "安裝 Boot9strap (透過 Frogtool)"
* - [frogcert.bin](magnet:?xt=urn:btih:d12278ea50bb3574f1fbd327f3d0e2292c70941f&dn=frogcert.bin&tr=https%3a%2f%2ftracker.fastdownload.xyz%3a443%2fannounce&tr=https%3a%2f%2fopentracker.xyz%3a443%2fannounce&tr=http%3a%2f%2fopen.trackerlist.xyz%3a80%2fannounce&tr=http%3a%2f%2ft.nyaatracker.com%3a80%2fannounce&tr=udp%3a%2f%2ftracker.tiny-vps.com%3a6969%2fannounce&tr=udp%3a%2f%2fopen.demonii.si%3a1337%2fannounce&tr=udp%3a%2f%2ftracker.port443.xyz%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.vanitycore.co%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.torrent.eu.org%3a451%2fannounce&tr=udp%3a%2f%2fretracker.lanta-net.ru%3a2710%2fannounce&tr=udp%3a%2f%2fthetracker.org%3a80%2fannounce&tr=http%3a%2f%2ftorrent.nwps.ws%3a80%2fannounce&tr=udp%3a%2f%2ftracker.coppersurfer.tk%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.iamhansen.xyz%3a2000%2fannounce&tr=udp%3a%2f%2fbt.xxx-tracker.com%3a2710%2fannounce&tr=http%3a%2f%2f0d.kebhana.mx%3a443%2fannounce&tr=udp%3a%2f%2fexodus.desync.com%3a6969%2fannounce&tr=udp%3a%2f%2ftracker.opentrackr.org%3a1337%2fannounce&tr=udp%3a%2f%2ftracker4.itzmx.com%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.justseed.it%3a1337%2fannounce&tr=http%3a%2f%2ftherightsize.net%3a1337%2fannounce&tr=udp%3a%2f%2fretracker.hotplug.ru%3a2710%2fannounce&tr=udp%3a%2f%2ftracker.internetwarriors.net%3a1337%2fannounce&tr=udp%3a%2f%2f9.rarbg.com%3a2800%2fannounce&tr=https%3a%2f%2f2.track.ga%3a443%2fannounce&tr=udp%3a%2f%2fbigfoot1942.sektori.org%3a6969%2fannounce)
* 最新版的 [Frogtool](https://github.com/zoogie/Frogtool/releases/latest)
* 最新版的 [b9sTool](https://github.com/zoogie/b9sTool/releases/latest)
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
#### 第一節 — 準備工作
diff --git a/_pages/zh_TW/installing-boot9strap-(hardmod).txt b/_pages/zh_TW/installing-boot9strap-(hardmod).txt
index 42ae770db8..5d5f0ccab8 100644
--- a/_pages/zh_TW/installing-boot9strap-(hardmod).txt
+++ b/_pages/zh_TW/installing-boot9strap-(hardmod).txt
@@ -22,7 +22,7 @@ title: "安裝 boot9strap (透過硬改)"
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)*
* 最新版的 [hardmod-b9s-installer](https://github.com/ihaveamac/hardmod-b9s-installer/releases/latest)
+ Windows 使用者可使用已編譯的 `.exe` 檔，而 Mac 及 Linux 使用者得先安裝 [Python 3](https://www.python.org/downloads/) 才能執行 `.py` 檔
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
* 對應您主機型號及版本的 `.firm` 檔案：
| 系統版本 | 內核版本 | 舊型 3DS 或 舊型 2DS | New 3DS 或 New 2DS |
diff --git a/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt
new file mode 100644
index 0000000000..62c133ab69
--- /dev/null
+++ b/_pages/zh_TW/installing-boot9strap-(hbl-usm).txt
@@ -0,0 +1,81 @@
+---
+title: "Installing boot9strap (HBL-USM)"
+---
+
+{% include toc title="條目內容" %}
+
+### 必讀事項
+
+In order to exploit the SAFE_MODE firmware of our system, we need to inject an exploited WiFi profile.
+
+As we already have Homebrew access, we can use slotTool to do this.
+
+This specific method is intended to be used with Homebrew Launcher access through [BrowserHax 2020](homebrew-launcher-(browserhax-2020)).
+
+If you have Homebrew Launcher access through another entry point, you should use [Frogtool](installing-boot9strap-(frogtool)).
+
+Once the WiFi profile has been injected, we will use SAFE_MODE, which is a recovery feature present on all 3DS consoles, to activate the exploited WiFi profile.
+
+If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will need to use a [Legacy Method](legacy-methods). For assistance with this matter, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask, in English, for help.
+{: .notice--danger}
+
+### 必備項目
+
+* The latest release archive for [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* The latest release archive for [unSAFE_MODE](https://github.com/zoogie/unSAFE_MODE/releases/latest)
+
+#### 第一節 — 準備工作
+
+1. Your console should be powered on and showing the Homebrew Launcher from the previous part of the guide
+1. Launch slotTool from the list of homebrew
+ + If you get stuck on a red screen, forcefully power off the console by holding the power button for fifteen seconds, then retry this section
+1. Select the "INSTALL exploit to wifi slots 1,2,3 & shutdown" option
+ + You will see some on-screen text and then your system will shut down
+1. Remove your SD card from your console and connect it to your computer
+1. Copy `boot.firm` from the Luma3DS `.zip` to the root of your SD card
+1. Copy `usm.bin` from the unSAFE_MODE `.zip` to the root of your SD card
+1. Put your SD card back into your console
+
+#### Section II - unSAFE_MODE
+
+1. With your system still powered off, hold the following buttons: (Left Shoulder) + (Right Shoulder) + (D-Pad Up) + (A), then press (Power)
+ + Keep holding the buttons until the console boots into Safe Mode
+1. Press "OK" to accept the update
+ + There is no update. This is part of the exploit
+1. Press "I accept" to accept the terms and conditions
+1. The update will eventually fail, with error code `003-1099`. This is intended behaviour
+1. When asked "Would you like to configure Internet settings?", select "Yes"
+1. On the following menu, navigate to `Connection 1` -> `Change Settings` -> `Next Page (right arrow)` -> `Proxy Settings` -> `Detailed Setup`
+ + Here is a [visual representation](https://uwuu.ca/images/safemode_highlighted.png)
+1. Once you see `B9S install SUCCESS` on the top screen, press any button to reboot to Luma Configuration
+
+#### 第三節 — 設定 Luma3DS
+
+1. Your device should automatically show the Luma Configuration menu
+1. 透過方向鍵及『A』以開啟下列選項：
+ + **『Show NAND or user string in System Settings』**
+1. 按『Start』鍵以存檔並重新啟動系統
+ + Your device should load the Home Menu after a short delay. If you get a black screen lasting longer than 5 minutes, [follow this troubleshooting guide](troubleshooting#black-screen-on-sysnand-boot-after-installing-boot9strap)
+
+#### Section IV - Restoring WiFi Configuration Profiles
+
+1. 啟動『下載通信 (Download Play)』程式
+1. Wait until you see the two buttons
+ + Do not press either of the buttons
+1. Press (Left Shoulder) + (D-Pad Down) + (Select) at the same time to open the Rosalina menu
+1. 選擇『Miscellaneous options』
+1. 選擇『Switch the hb. title to the current app.』
+1. 按『B』繼續
+1. 按『B』回到 Rosalina 主選單
+1. 按『B』退出 Rosalina 選單
+1. 按『Home』鍵，並關閉『下載通信 (Download Play)』程式
+1. Relaunch the Download Play application
+1. 您的主機應該就會啟動 Homebrew Launcher 了
+1. Launch slotTool from the list of homebrew
+1. Select "RESTORE original wifi slots 1,2,3"
+1. Your device will then reboot
+
+___
+
+### 繼續至[完成安裝](finalizing-setup)
+{: .notice--primary}
diff --git a/_pages/zh_TW/installing-boot9strap-(mset).txt b/_pages/zh_TW/installing-boot9strap-(mset).txt
index 9e854fc305..dcdc148aa0 100644
--- a/_pages/zh_TW/installing-boot9strap-(mset).txt
+++ b/_pages/zh_TW/installing-boot9strap-(mset).txt
@@ -9,7 +9,7 @@ title: "安裝 boot9strap (透過 MSET)"
* 任意可在您主機上運行的 DS 燒錄卡
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
### 操作說明
diff --git a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
index 89a6ed679d..41376c0108 100644
--- a/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
+++ b/_pages/zh_TW/installing-boot9strap-(ntrboot).txt
@@ -14,7 +14,7 @@ title: "安裝 boot9strap (透過 ntrboot)"
* 一張已寫入 ntrboot 漏洞的燒錄卡
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
### 操作說明
diff --git a/_pages/zh_TW/installing-boot9strap-(soundhax).txt b/_pages/zh_TW/installing-boot9strap-(soundhax).txt
index c30b58990c..574f1f3e01 100644
--- a/_pages/zh_TW/installing-boot9strap-(soundhax).txt
+++ b/_pages/zh_TW/installing-boot9strap-(soundhax).txt
@@ -22,7 +22,7 @@ This means that using a cartridge update from a version containing an older Nint
* 最新版的 [Soundhax](http://soundhax.com) *(對應您主機的區域、型號、及版本的檔案)*
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
* 最新版的 [pre9otherapp](https://github.com/Pirater12/otherapp/releases/latest) *(選擇對應您韌體版本的 `.bin` 檔案)*
diff --git a/_pages/zh_TW/installing-boot9strap-(usm).txt b/_pages/zh_TW/installing-boot9strap-(usm).txt
index 216e54b76c..c3d0cc076e 100644
--- a/_pages/zh_TW/installing-boot9strap-(usm).txt
+++ b/_pages/zh_TW/installing-boot9strap-(usm).txt
@@ -27,6 +27,7 @@ If your (Right/Left Shoulder), (D-Pad Up) or (A) buttons do not work, you will n
#### 第一節 — 準備工作
1. Open [unSAFE_MODE-bb3 tool](https://usm.bruteforcemovable.com/) on your computer
+ + If this site is nonfunctional, try using [this one](https://3ds.nhnarwhal.com/3dstools/unsafemode.php)
1. Upload your movable.sed using the "Choose File" option
1. Click "Download unSAFE_MODE-bb3 archive"
+ This will download an exploit DSiWare called `F00D43D5.bin` and a SAFE_MODE exploit data file called `usm.bin` inside of a zip folder (`unSAFE_MODE-bb3.zip`)
diff --git a/_pages/zh_TW/legacy-methods.txt b/_pages/zh_TW/legacy-methods.txt
index 004566239c..b3ab3ce40e 100644
--- a/_pages/zh_TW/legacy-methods.txt
+++ b/_pages/zh_TW/legacy-methods.txt
@@ -8,7 +8,7 @@ title: "Legacy Methods"
There have been multiple improvements and advancements to methods for installing CFW over the last short while.
-For this reason, it is recommended you use the most up-to-date method found on the [Seedminer](seedminer) page.
+For this reason, it is recommended you use the most up-to-date method found on the [Get Started](get-started) page.
However, "legacy" or outdated methods are kept here for various purposes. They will require that you have done [Seedminer](seedminer) first.
diff --git a/_pages/zh_TW/move-emunand.txt b/_pages/zh_TW/move-emunand.txt
index b9cd7ce0c4..8b914cf728 100644
--- a/_pages/zh_TW/move-emunand.txt
+++ b/_pages/zh_TW/move-emunand.txt
@@ -16,7 +16,7 @@ title: "移植 EmuNAND"
### 必備項目
* 現成的 EmuNAND 磁區
-* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* 最新版的 [FBI 管理器](https://github.com/Steveice10/FBI/releases/latest)
### 操作說明
diff --git a/_pages/zh_TW/ntrboot.txt b/_pages/zh_TW/ntrboot.txt
index 648f6c4be0..4afd2136e5 100644
--- a/_pages/zh_TW/ntrboot.txt
+++ b/_pages/zh_TW/ntrboot.txt
@@ -17,23 +17,23 @@ title: "ntrboot"
| 燒錄卡名稱 | 目前價錢 | 可使用『Time Bomb』嗎？ | 3DS 版本？ | DSi 版本？ | 備註 |
|-|-:|:-:|:-:|:-:|-|
-| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
-| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
+| [**R4i-SDHC B9S**](http://www.nds-card.com/ProShow.asp?ProID=574) | $15.99 | September 3, 2019 | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot**; can be flashed back to an NDS flashcart. |
+| [**R4i Gold 3DS Plus**](http://www.nds-card.com/ProShow.asp?ProID=575) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** ([internal switch to switch between ntrboot and NDS modes]({{ "/images/screenshots/r4i-gold-3ds-plus.png" | absolute_url }})); do not manually flash with ntrboot. |
| [**Acekard 2i**](http://www.nds-card.com/ProShow.asp?ProID=160) | $20.99 美元 | 否 | <= 4.3.0 | <= 1.4.4 | |
| [**DSTT**](http://www.nds-card.com/ProShow.asp?ProID=157) | $9.99 | No | None | None | Only models with [certain flash chips](https://gist.github.com/aspargas2/fa2a70aed3a7fe33f1f10bc264d9fab6) are compatible with ntrboot. |
-| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.13.0 | <= 1.4.5 | All RTS revisions are compatible. |
-| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | |
-| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 與 2013 年版不相容。 |
-| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 與 2013 年版不相容。 |
-| **Ace3DS X** | | No | <= 11.13.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
-| **Ace3DS Plus** | | No | <= 11.13.0 | <= 1.4.5 | |
+| [**R4i Gold 3DS**](http://www.nds-card.com/ProShow.asp?ProID=149) | $19.99 | No | <= 11.14.0 | <= 1.4.5 | All RTS revisions are compatible. |
+| [**R4i-SDHC 3DS RTS**](http://www.nds-card.com/ProShow.asp?ProID=146) | $13.99 | 1.87: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | |
+| [**R4iSDHC GOLD Pro 20XX**](http://www.nds-card.com/ProShow.asp?ProID=490) | $9.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 與 2013 年版不相容。 |
+| [**R4iSDHC RTS LITE 20XX**](http://www.nds-card.com/ProShow.asp?ProID=450) | $13.99 | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. 與 2013 年版不相容。 |
+| **Ace3DS X** | | No | <= 11.14.0 | <= 1.4.5 | **Comes pre-flashed with ntrboot** (external switch to switch between ntrboot ("3DS") and NDS modes); do not manually flash with ntrboot. |
+| **Ace3DS Plus** | | No | <= 11.14.0 | <= 1.4.5 | |
| **Gateway Blue** | | 否 | 4.1.0 - 4.5.0 | <= 1.4.5 | |
-| **Infinity 3 R4i** | | No | <= 11.13.0 | <= 1.4.5 | |
+| **Infinity 3 R4i** | | No | <= 11.14.0 | <= 1.4.5 | |
| **R4 3D Revolution** | | 否 | 無 | 無 | |
| **R4i Gold 3DS Deluxe "Starter"** | | 否 | 4.1.0 - 4.5.0 | <= 1.4.5 | |
| **R4i Ultra** | | 否 | <= 4.3.0 | <= 1.4.5 | |
-| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.13.0 | <= 1.4.5 | |
-| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.13.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
+| **R4i-SDHC 3DS RTS Deluxe Edition** | | Unknown | <= 11.14.0 | <= 1.4.5 | |
+| **R4iSDHC Dual-Core 20XX** | | 3.9b: September 3, 2019 | <= 11.14.0 | <= 1.4.5 | All R4iSDHC 20XX flashcarts are identical. |
![]({{ "/images/screenshots/ntrboot-flashcarts.png" | absolute_url }})
{: .notice--info}
diff --git a/_pages/zh_TW/region-changing.txt b/_pages/zh_TW/region-changing.txt
index ad10003cc4..1564e560cc 100644
--- a/_pages/zh_TW/region-changing.txt
+++ b/_pages/zh_TW/region-changing.txt
@@ -29,7 +29,7 @@ title: "區碼變更"
### 必備項目
-* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
* 最新版的 [FBI 管理器](https://github.com/Steveice10/FBI/releases/latest) *(`.3dsx` 檔案)*
* 選擇您想要將您主機區域設定為的 11.5.0 CTRTransfer 鏡像檔:
+ - [New 3DS 或 2DS - 11.5.0 - 歐版 - CTRTransfer](magnet:?xt=urn:btih:465f1048f81e8e5c651ce2a4d9df48fec88d1099&dn=11.5.0-38E_ctrtransfer_n3ds.zip&tr=udp%3A%2F%2F9.rarbg.to%3A2710%2Fannounce&tr=udp%3A%2F%2Fbt.xxx-tracker.com%3A2710%2Fannounce&tr=udp%3A%2F%2Fexodus.desync.com%3A6969%2Fannounce&tr=udp%3A%2F%2Fmgtracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fopen.demonii.si%3A1337%2Fannounce&tr=udp%3A%2F%2Fpublic.popcorn-tracker.org%3A6969%2Fannounce&tr=udp%3A%2F%2Fthetracker.org%3A80%2Fannounce&tr=udp%3A%2F%2Ftracker.coppersurfer.tk%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.cypherpunks.ru%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.ds.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.internetwarriors.net%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.mg64.net%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.open-internet.nl%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.opentrackr.org%3A1337%2Fannounce&tr=udp%3A%2F%2Ftracker.port443.xyz%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.qt.is%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.tiny-vps.com%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker.torrent.eu.org%3A451%2Fannounce&tr=udp%3A%2F%2Ftracker.vanitycore.co%3A6969%2Fannounce&tr=udp%3A%2F%2Ftracker-2.msm8916.com%3A6969%2Fannounce)
diff --git a/_pages/zh_TW/seedminer.txt b/_pages/zh_TW/seedminer.txt
index eb25f175b0..6b7af52866 100644
--- a/_pages/zh_TW/seedminer.txt
+++ b/_pages/zh_TW/seedminer.txt
@@ -16,21 +16,7 @@ This method uses a powerful graphics card to perform the calculations needed. A
### 操作說明
-#### Section I - Compatibility Test
-
-While this test is not strictly necessary to perform the Seedminer exploit, the follow-up exploits to this do require this test to be performed and it would be a waste of time and effort to perform Seedminer without the ability to use the other exploits.
-
-There are several different methods that build on the Seedminer exploit, so even if this test fails you can still use another method.
-
-#### DSiWare Management Test (used for unSAFE_MODE)
-
-1. Go to System Settings, then "Data Management", then "DSiWare"
-1. If your console does not crash, the test was successful
- + If the console crashes to the home menu, the test has failed and you will have to use a legacy method at the bottom of this page
- + If you see a colored screen before the console crashes to the home menu, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
-1. Exit to home menu
-
-#### 第二節 — 準備工作
+#### 第一節 — 準備工作
1. 將 SD 卡插入至電腦中
1. 移動至 SD 卡的 `Nintendo 3DS` 資料夾中
@@ -52,11 +38,12 @@ There are several different methods that build on the Seedminer exploit, so even
+ 如果您遇到錯誤訊息且從清單中被踢回主選單，那麼您必須先創立一個 Mii，或者您的主機無法連線至任天堂伺服器 (您的主機可能已被封殺或有網路連線之問題)
1. 選擇您的 Mii 個人檔案，並找尋您的好友代碼
-#### 第三節 — Seedminer
+#### Section II - Seedminer
1. Open [Bruteforce Movable](https://seedminer.hacks.guide/) on your computer
+ 此網站可自動替您取得 `movable_part1.sed` (透過一台機器操控的 3DS 主機)，並破解您裝置的 DSiWare 加密金鑰 (透過某自願者的電腦運行 Seedminer)
- + 如果自動服務無法使用，請加入[Nintendo Homebrew Discord 伺服器](https://discord.gg/MWxPgEp)以英文的方式請求幫助
+ + If this site is nonfunctional, try using [this one](https://bfm.nintendohomebrew.com/)
+ + If both of these sites are nonfunctional, join [Nintendo Homebrew on Discord](https://discord.gg/MWxPgEp) and ask (in English) for someone there to assist you
1. 輸入您裝置的好友代碼 (勿含空白或減號) 至『Your friend code (您的好友代碼)』欄位中
1. 輸入您主機的 32 字元辨識碼 (剛請您複製至記事本中的號碼) 至『Your ID0』欄位中
+ Do not attempt to enter the ID0 by hand. Ensure the ID0 is entered correctly by copying and pasting it from where you saved it in the previous section
@@ -79,7 +66,7 @@ ___
This method of using Seedminer for further exploitation uses your `movable.sed` file to take advantage of exploits in the SAFE_MODE firmware present on all 3DS units.
-This method is compatible with all regions, though the CHN region is not covered by this guide.
+This method is compatible with all regions except CHN and TWN.
Continue to [Installing boot9strap (USM)](installing-boot9strap-(usm))
{: .notice--primary}
diff --git a/_pages/zh_TW/site-navigation.txt b/_pages/zh_TW/site-navigation.txt
index f65b387fbc..3e84664f4a 100644
--- a/_pages/zh_TW/site-navigation.txt
+++ b/_pages/zh_TW/site-navigation.txt
@@ -9,7 +9,7 @@ sitemap: false
+ [完成安裝](finalizing-setup)
+ [Homebrew Launcher (透過 Soundhax)](homebrew-launcher-(soundhax))
-+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Seedminer](seedminer)
{% endcapture %}
{{ notice-1 | markdownify }}
@@ -50,6 +50,7 @@ sitemap: false
+ [Installing boot9strap (SafeB9SInstaller)](installing-boot9strap-(safeb9sinstaller))
+ [安裝 boot9strap (透過 Soundhax)](installing-boot9strap-(soundhax))
+ [Installing boot9strap (unSAFE_MODE)](installing-boot9strap-(usm))
++ [Installing boot9strap (HBL-USM)](installing-boot9strap-(hbl-usm))
+ [移植 EmuNAND](move-emunand)
+ [ntrboot](ntrboot)
+ [區碼變更](region-changing)
diff --git a/_pages/zh_TW/uninstall-cfw.txt b/_pages/zh_TW/uninstall-cfw.txt
index d54fd6a949..6a0ad09b62 100644
--- a/_pages/zh_TW/uninstall-cfw.txt
+++ b/_pages/zh_TW/uninstall-cfw.txt
@@ -22,7 +22,7 @@ title: "卸載自製韌體"
### 必備項目
-* 最新版的 [GodMode9](https://github.com/d0k3/GodMode9/releases/latest)
+* The v1.9.2pre1 release of [GodMode9](https://github.com/d0k3/GodMode9/releases/tag/v1.9.2pre1)
### 操作說明
@@ -41,12 +41,12 @@ title: "卸載自製韌體"
+ 在『New 3DS』主機上，「X」應為2
+ 在『舊版 3DS』主機上，「X」應為0
1. 選擇 `.app` 檔案
-1. 選擇 `NCCH Image Options`
+1. Select `NCCH image options`
1. 選擇 `Mount image to drive`
1. 在出現的視窗中，打開 `exefs` 資料夾
1. 在此資料夾內，選中 `.firm` 檔案
-1. Select "Firm Image Options"
-1. 選擇『Boot Firm』
+1. Select "FIRM image options"
+1. Select "Boot FIRM"
1. 出現提示時，按A選擇解密並製作副本
1. 您應該會啟動到正常的 3DS 主選單。 如果是這樣，請關閉設備並繼續下一節
+ 如果您沒有進入到正常的 3DS 主選單，繼續下面的章節 **將** 導致您的主機變磚。 請加入 [Discord 中的 Nintendo Homebrew 伺服器](https://discord.gg/MWxPgEp) 並使用英文尋求協助
diff --git a/_pages/zh_TW/updating-b9s.txt b/_pages/zh_TW/updating-b9s.txt
index debc35fb9c..7f52adfa91 100644
--- a/_pages/zh_TW/updating-b9s.txt
+++ b/_pages/zh_TW/updating-b9s.txt
@@ -9,15 +9,15 @@ title: "更新 B9S" #
本頁面適用於已安裝 boot9strap 且想將其更新至最新版的使用者。
{% capture notice-1 %}
-近日有許多的自製韌體用戶已經被任天堂封殺。 為了自保，請在遵循本教學前進行以下防護措施：
+近日有許多的自製韌體用戶已經被任天堂封殺，幾乎所有的線上功能都被禁止使用。 為了自保，請在遵循本教學前進行以下防護措施：
-1. 進入『系統設定(System Settings)』、『網路設定(Internet Settings)』、『SpotPass』、『回傳系統訊息(Sending of System Information)』
-1. 禁用『回傳系統訊息(Sending of System Information)』
+1. 進入『系統設定 (System Settings)』、『網路設定 (Internet Settings)』、『SpotPass』、『回傳系統訊息 (Sending of System Information)』
+1. 禁用『回傳系統訊息 (Sending of System Information)』
1. 退出系統設定
1. 開啟您的好友清單 (HOME 主選單中最上方的[橘色笑臉圖示]({{ "/images/friend-list-icon.png" | absolute_url }}))
+ 如果您遇到錯誤訊息且從清單中被踢回主選單，那麼可能您已將好友清單設定關閉或您的主機無法連線至任天堂伺服器 (您可能已被封殺或網路連線之問題)
1. 進入好友選單設定、『好友提示設定 (Friend Notification Settings)』、『顯示正在遊玩的遊戲 (Show friends what you're playing)』
-1. 禁用『顯示正在遊玩的遊戲(Show friends what you're playing)』
+1. 禁用『顯示正在遊玩的遊戲 (Show friends what you're playing)』
1. 退出好友清單
{% endcapture %}
@@ -28,7 +28,7 @@ title: "更新 B9S" #
* 最新版的 [SafeB9SInstaller](https://github.com/d0k3/SafeB9SInstaller/releases/latest)
* 最新版的 [boot9strap](https://github.com/SciresM/boot9strap/releases/latest) *(正常版的 boot9strap；非 `devkit` 或 `ntr` 檔案)*
-* The latest release of [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
+* 最新版本的 [Luma3DS](https://github.com/AuroraWright/Luma3DS/releases/latest)
* 最新版的 [Homebrew Launcher](https://github.com/fincs/new-hbmenu/releases/latest)
### 操作說明
diff --git a/assets/js/_main.js b/assets/js/_main.js
index 5461a48568..074f5ed3ad 100644
--- a/assets/js/_main.js
+++ b/assets/js/_main.js
@@ -142,6 +142,7 @@ $(document).ready(function(){
"bannerbomb3": "18",
"homebrew-launcher-(pichaxx)": "19",
"installing-boot9strap-(usm)": "20",
+ "installing-boot9strap-(hbl-usm)": "21",
};
for(var method in methods){
@@ -175,8 +176,9 @@ $(document).ready(function(){
"16": ["seedminer", "homebrew-launcher-(steelhax)", "installing-boot9strap-(frogtool)", "finalizing-setup"],
"17": ["seedminer", "multiple-options", "installing-boot9strap-(fredtool)", "finalizing-setup"],
"18": ["seedminer", "bannerbomb3", "installing-boot9strap-(fredtool)", "finalizing-setup"],
- "19": ["seedminer", "homebrew-launcher-(pichaxx)", "dsidumper","installing-boot9strap-(fredtool)", "finalizing-setup"],
+ "19": ["seedminer", "homebrew-launcher-(pichaxx)", "installing-boot9strap-(frogtool)", "finalizing-setup"],
"20": ["seedminer", "installing-boot9strap-(usm)", "finalizing-setup"],
+ "21": ["homebrew-launcher-(browserhax-2020)", "installing-boot9strap-(hbl-usm)", "finalizing-setup"],
};
unhide = unhide.concat(route[method]);
if(typeof unhide !== 'undefined' && unhide.length > 0){