mirror/openscale
1
0
Fork 0
mirror of https://github.com/oliexdev/openScale.git synced 2025-08-29 19:20:36 +02:00
Code Issues Releases Wiki Activity

finished describing how to add an external I2C EEPROM

oliexdev
2014-12-28 02:53:05 -08:00
parent 5afed729fa
commit f091b6afeb
1 changed files with 170 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

172
Home.md

@@ -15,9 +15,177 @@ openScale is an Open Source App for Android to keep a log of your body weight, f
## Adding external I²C EEPROM ## Adding external I²C EEPROM
For temporally storing the measured values, even if the power supply is disconnected, I used an external [512 Kbit I²C EEPROM 24LC512](https://github.com/oliexdev/openScale/raw/master/doc/eeprom_24lc512/24lc512_datasheet.pdf), see figure 5.2-5.3.
<table border="0">
<tr>
<th>
<a href="https://github.com/oliexdev/openScale/raw/master/doc/eeprom_24lc512/24lc512_schematic.png" target="_blank">
<img src='https://github.com/oliexdev/openScale/raw/master/doc/eeprom_24lc512/24lc512_schematic.png' width='250px' alt='image missing' /> </a> <br>
<sub>Figure 5.1: Schematic of the 24LC512 I²C EEPROM</sub>
</th>
<th>
<a href="https://github.com/oliexdev/openScale/raw/master/doc/parts/eeprom_front.JPG" target="_blank">
<img src='https://github.com/oliexdev/openScale/raw/master/doc/parts/eeprom_front.JPG' width='250px' alt='image missing' /> </a> <br>
<sub>Figure 5.2: I²C EEPROM module (front)</sub>
</th>
<th>
<a href="https://github.com/oliexdev/openScale/raw/master/doc/parts/eeprom_back.JPG" target="_blank">
<img src='https://github.com/oliexdev/openScale/raw/master/doc/parts/eeprom_back.JPG' width='250px' alt='image missing' /> </a> <br>
<sub>Figure 5.3: I²C EEPROM module (back)</sub>
</th>
</tr>
</table>
I soldered a breakout board like in figure 5.1 and connected it with the Arduino like in figure 2.4. Note because I set A0-A2 to GND the EEPROM had the I²C address 0x50. For the Arduino library I used the [LibraryForI2CEEPROM](http://arduino.cc/playground/Main/LibraryForI2CEEPROM) by robtillaart.
For storing the measured values I first defined a struct "scale_data".
```C
typedef struct scale_data{
int year;
byte month;
byte day;
byte hour;
byte minute;
int weight;
int fat;
int water;
int muscle;
int checksum;
} __attribute__ ((packed));
```
The attribute `__attribute__ ((packed))` is important to avoid byte padding in this struct otherwise the contiguous writing or reading to the I²C EEPROM will not work! To reduce the amount of the required bytes I used integers (2 bytes) and not floats (4 bytes). The conversion between integers and float would I done when I send the data to the tablet. To know how many data entries are in the I²C EEPROM stored I always write/read the current data size at the EEPROM address 0. So the writing function to the I²C EEPROM looks like:
```C
#include <Wire.h>
#include <I2C_eeprom.h>
I2C_eeprom eeprom(0x50);
void write_scale_data(int weight, int fat, int water, int muscle)
{
int data_size = 0;
struct scale_data wdata;
eeprom.readBlock(0, (uint8_t*)&data_size, sizeof(data_size));
wdata.year = year();
wdata.month = month();
wdata.day = day();
wdata.hour = hour();
wdata.minute = minute();
wdata.weight = weight;
wdata.fat = fat;
wdata.water = water;
wdata.muscle = muscle;
wdata.checksum = calc_checksum(&wdata);
if (eeprom.writeBlock(sizeof(data_size)+data_size*sizeof(wdata), (uint8_t*)&wdata, sizeof(wdata)) != 0) {
Serial.println("$E$ Error writing data to eeprom");
}
delay(100);
data_size++;
if (eeprom.writeBlock(0, (uint8_t*)&data_size, sizeof(data_size)) != 0) {
Serial.println("$E$ Error writing data to eeprom");
}
}
```
To check the integrity of the data I calculate a XOR checksum with the following function:
```C
int calc_checksum(struct scale_data* wdata)
{
int checksum = 0;
checksum ^= wdata->year;
checksum ^= wdata->month;
checksum ^= wdata->day;
checksum ^= wdata->hour;
checksum ^= wdata->minute;
checksum ^= (int)((float)wdata->weight / 10.0f);
checksum ^= (int)((float)wdata->fat / 10.0f);
checksum ^= (int)((float)wdata->water / 10.0f);
checksum ^= (int)((float)wdata->muscle / 10.0f);
return checksum;
}
```
The reason why I did the wired conversion back to float and then again to integer was that I send the data to the tablet with the correct floating point value. In this way the Android app could also calculate the correct XOR checksum.
To send the stored values in the I²C EEPROM I used following function:
```C
void send_scale_data()
{
int data_size = 0;
struct scale_data wdata;
eeprom.readBlock(0, (uint8_t*)&data_size, sizeof(data_size));
Serial.print("$S$");
Serial.println(data_size);
for (int i=0; i < data_size; i++)
{
eeprom.readBlock(sizeof(data_size)+i*sizeof(wdata), (uint8_t*)&wdata, sizeof(wdata));
if (wdata.checksum != calc_checksum(&wdata)) {
Serial.print("$E$ Wrong Checksum for data ");
Serial.print(i);
Serial.println();
}
Serial.print("$D$");
Serial.print(i);
Serial.print(',');
Serial.print(wdata.year);
Serial.print(',');
Serial.print(wdata.month);
Serial.print(',');
Serial.print(wdata.day);
Serial.print(',');
Serial.print(wdata.hour);
Serial.print(',');
Serial.print(wdata.minute);
Serial.print(',');
Serial.print((float)wdata.weight / 10.0f);
Serial.print(',');
Serial.print((float)wdata.fat / 10.0f);
Serial.print(',');
Serial.print((float)wdata.water / 10.0f);
Serial.print(',');
Serial.print((float)wdata.muscle / 10.0f);
Serial.print(',');
Serial.print(wdata.checksum);
Serial.print('\n');
}
}
```
For clear all stored values just set the data size at I²C EEPROM address 0 to zero, like in the following code snippet:
```C
void clear_scale_data()
{
int data_size = 0;
eeprom.writeBlock(0, (uint8_t*)&data_size, sizeof(data_size));
}
```
New measured values will now just overwriting the old stored values.
## Setting up a RTC module ## Setting up a RTC module
I need a real time clock (RTC) module to get always the correct time and date, even if the Arduino is in deep sleep mode. First I used the [Tiny RTC I²C](https://www.google.com/search?q=tiny+rtc+i2c+module) module that has the DS1307 chip set on but somehow my Tiny RTC board lost always the time if the power supply was disconnected. I measured the battery voltage of the Tiny RTC but it was okay. I guess I ordered a faulty module. I need a real time clock (RTC) module to get always the correct time and date, even if the Arduino is in deep sleep mode. First I used the [Tiny RTC I²C module](https://www.google.com/search?q=tiny+rtc+i2c+module) that has the DS1307 chip set on but somehow my Tiny RTC board lost always the time if the power supply was disconnected. I measured the battery voltage of the Tiny RTC but it was okay. I guess I ordered a faulty module.
This time I bought a different [I²C RTC module](http://www.roboter-bausatz.de/31/rtc-ds3231-echtzeituhr-modul) which has a DS3231 chip set on, see figure 4.1 and 4.2. I connected the module like in the schematic in figure 2.4. This time I bought a different [I²C RTC module](http://www.roboter-bausatz.de/31/rtc-ds3231-echtzeituhr-modul) which has a DS3231 chip set on, see figure 4.1 and 4.2. I connected the module like in the schematic in figure 2.4.
@@ -39,7 +207,7 @@ This time I bought a different [I²C RTC module](http://www.roboter-bausatz.de/3
</tr> </tr>
</table> </table>
I used the [DS3232RTC library](https://github.com/JChristensen/DS3232RTC) by JChristensen to get the current time and date. At first I had set up the current time and date by using the example sketch "SetSerial" which comes with the library. Just send a string with this format `yy,m,d,h,m,s` over the serial monitor of the Arduino IDE. I used the [DS3232RTC library](https://github.com/JChristensen/DS3232RTC) by JChristensen to get the current time and date. At first I setted up the current time and date by using the example sketch "SetSerial" which comes with the library. I just send a string with the format `yy,m,d,h,m,s` via the serial monitor of the Arduino IDE.
Now I could read the current time and date with the [Arduino Time library functions](http://playground.arduino.cc/Code/Time) like in the following code snippet: Now I could read the current time and date with the [Arduino Time library functions](http://playground.arduino.cc/Code/Time) like in the following code snippet: