diff --git a/live/Lulzbot/0.1.0.ini b/live/Lulzbot/0.1.0.ini new file mode 100644 index 0000000..3ab6999 --- /dev/null +++ b/live/Lulzbot/0.1.0.ini @@ -0,0 +1,423 @@ +# LulzBot profiles +# Based on community profiles and original profiles from Cura LulzBot Edition. + +[vendor] +# Vendor name will be shown by the Config Wizard. +name = LulzBot +config_version = 0.1.0 +config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/ + +[printer_model:MINI_AERO] +name = Mini Aero +variants = 0.5 +technology = FFF +#bed_model = mini_bed.stl +#bed_texture = mini.svg +default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot + +[printer_model:TAZ6_AERO] +name = Taz6 Aero +variants = 0.5 +technology = FFF +default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot + +# [printer_model:TAZ_WORKHORSE] +# name = Taz Workhorse +# variants = 0.5 +# technology = FFF +# default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot + +[print:*common*] +avoid_crossing_perimeters = 0 +bottom_fill_pattern = monotonic +top_fill_pattern = monotonic +bottom_solid_layers = 3 +top_solid_layers = 4 +bridge_acceleration = 500 +bridge_angle = 0 +bridge_flow_ratio = 1 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 0 +compatible_printers = +compatible_printers_condition = +complete_objects = 0 +default_acceleration = 500 +dont_support_bridges = 0 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +extra_perimeters = 0 +external_perimeter_extrusion_width = 0.56 +external_perimeter_speed = 35 +external_perimeters_first = 0 +extrusion_width = 0.56 +fill_angle = 45 +fill_density = 20% +fill_pattern = grid +first_layer_acceleration = 500 +first_layer_extrusion_width = 0.6 +first_layer_height = 0.3 +first_layer_speed = 15 +gap_fill_speed = 20 +infill_anchor = 1 +infill_anchor_max = 20 +infill_acceleration = 500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.56 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +layer_height = 0.25 +max_print_speed = 80 +max_volumetric_speed = 0 +min_skirt_length = 0 +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode +overhangs = 1 +perimeter_acceleration = 500 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.56 +perimeter_speed = 45 +perimeters = 3 +post_process = +raft_layers = 0 +raft_first_layer_density = 70 +resolution = 0 +seam_position = aligned +single_extruder_multi_material_priming = 1 +skirt_distance = 3 +skirt_height = 1 +skirts = 3 +slice_closing_radius = 0.049 +small_perimeter_speed = 22 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.56 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 45 +support_material_auto = 1 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.44 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 3 +support_material_interface_spacing = 0 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2.5 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 0 +support_material_with_sheath = 1 +support_material_xy_spacing = 60% +thin_walls = 1 +top_infill_extrusion_width = 0.52 +top_solid_infill_speed = 40 +travel_speed = 175 +wipe_tower = 0 +wipe_tower_bridging = 10 +wipe_tower_rotation_angle = 0 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 + +[print:0.14mm DETAIL @lulzbot] +inherits = *common* +layer_height = 0.14 +bottom_solid_layers = 8 +top_solid_layers = 8 +infill_speed = 40 +solid_infill_speed = 50 +perimeter_speed = 35 +external_perimeter_speed = 30 +top_solid_infill_speed = 40 + +[print:0.25mm STANDARD @lulzbot] +inherits = *common* + +[print:0.30mm SPEED @lulzbot] +inherits = *common* +renamed_from = "0.3mm @lulzbot" +layer_height = 0.3 +seam_position = nearest +top_solid_layers = 3 +infill_speed = 45 +perimeter_speed = 40 +external_perimeter_speed = 35 + +[filament:ColorFabb PLA-PHA @lulzbot] +filament_vendor = ColorFabb +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #29B2B2 +filament_cost = 0 +filament_density = 1.25 +filament_diameter = 2.85 +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 35 +min_print_speed = 10 +slowdown_below_layer_time = 10 +start_filament_gcode = "; Filament gcode\n" +temperature = 200 + +[filament:Jessie PLA @lulzbot] +filament_vendor = Printed Solid +renamed_from = "PrintedSolid Jesse PLA @lulzbot" +bed_temperature = 60 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #29B2B2 +filament_cost = 27 +filament_density = 1.24 +filament_diameter = 2.85 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 220 +max_fan_speed = 100 +min_fan_speed = 80 +min_print_speed = 10 +slowdown_below_layer_time = 10 +start_filament_gcode = "; Filament gcode\n" +temperature = 220 + +[filament:Generic PLA @lulzbot] +inherits = Jessie PLA @lulzbot +filament_vendor = Generic + +[filament:Generic PETG @lulzbot] +filament_vendor = Generic +bed_temperature = 60 +first_layer_bed_temperature = 65 +first_layer_temperature = 235 +temperature = 230 +bridge_fan_speed = 100 +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 60 +filament_colour = #29B2B2 +filament_cost = 27 +filament_density = 1.27 +filament_diameter = 2.85 +filament_notes = "Use glue stick." +filament_soluble = 0 +filament_toolchange_delay = 0 +filament_type = PETG +max_fan_speed = 80 +min_fan_speed = 40 +min_print_speed = 10 +slowdown_below_layer_time = 10 +start_filament_gcode = "; Filament gcode\n" + +[printer:Mini Aero 0.5mm] +printer_model = MINI_AERO +printer_variant = 0.5 +default_print_profile = 0.25mm STANDARD @lulzbot +default_filament_profile = Jessie PLA @lulzbot +bed_shape = 0x0,154x0,154x154,0x154 +before_layer_gcode = +between_objects_gcode = +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +deretract_speed = 20 +end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG92 E1 ; set extruder to 1mm for retract on print end (LulzBot Cura had 5mm, might be a contributing factor to between print Aerostruder jamming)\nM117 Cooling please wait ; progress indicator message on LCD\nG1 X5 Y5 Z158 E0 F10000 ; move to cooling position\nG1 E1 ; re-prime extruder\nM190 R40 ; wait for bed to cool down to removal temp\nM77 ; Stop GLCD Timer\nG1 X145 F1000 ; move extruder out of the way\nG1 Y175 F1000 ; present finished print\nM140 S0; cool downs\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n +extra_loading_move = -2 +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +high_current_on_filament_swap = 0 +inherits = +layer_gcode = +machine_max_acceleration_e = 10000 +machine_max_acceleration_extruding = 1500 +machine_max_acceleration_retracting = 1500 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 100 +machine_max_feedrate_e = 40 +machine_max_feedrate_x = 300 +machine_max_feedrate_y = 300 +machine_max_feedrate_z = 8 +machine_max_jerk_e = 2.5 +machine_max_jerk_x = 20 +machine_max_jerk_y = 20 +machine_max_jerk_z = 0.2 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +machine_limits_usage = time_estimate_only +max_layer_height = 0 +max_print_height = 158 +min_layer_height = 0.07 +nozzle_diameter = 0.5 +parking_pos_retraction = 92 +printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center. +remaining_times = 0 +retract_before_travel = 2 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 1 +retract_length_toolchange = 10 +retract_lift = 0 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier. +thumbnails = +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +[printer:Taz6 Aero 0.5mm] +printer_model = TAZ6_AERO +printer_variant = 0.5 +default_print_profile = 0.25mm STANDARD @lulzbot +default_filament_profile = Jessie PLA @lulzbot +bed_shape = 0x0,280x0,280x280,0x280 +before_layer_gcode = +between_objects_gcode = +cooling_tube_length = 5 +cooling_tube_retraction = 91.5 +deretract_speed = 20 +end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG91 ; relative positioning\nG1 E-1 F300 ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000 ; lift up and retract even more filament\nG1 E6 ; re-prime extruder\nM117 Cooling please wait ; progress indicator message on LCD\nG90 ; absolute positioning\nG1 Y0 F3000 ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000 ; present finished print\nM140 S0; cool downs\nM77 ; stop GLCD timer\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n +extra_loading_move = -2 +extruder_colour = "" +extruder_offset = 0x0 +gcode_flavor = marlin +high_current_on_filament_swap = 0 +inherits = +layer_gcode = +machine_max_acceleration_e = 1000 +machine_max_acceleration_extruding = 500 +machine_max_acceleration_retracting = 1000 +machine_max_acceleration_x = 9000 +machine_max_acceleration_y = 9000 +machine_max_acceleration_z = 100 +machine_max_feedrate_e = 40 +machine_max_feedrate_x = 300 +machine_max_feedrate_y = 300 +machine_max_feedrate_z = 3 +machine_max_jerk_e = 10 +machine_max_jerk_x = 8 +machine_max_jerk_y = 8 +machine_max_jerk_z = 0.4 +machine_min_extruding_rate = 0 +machine_min_travel_rate = 0 +machine_limits_usage = time_estimate_only +max_layer_height = 0 +max_print_height = 250 +min_layer_height = 0.07 +nozzle_diameter = 0.5 +parking_pos_retraction = 92 +printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center. +printer_technology = FFF +remaining_times = 0 +retract_before_travel = 2 +retract_before_wipe = 0% +retract_layer_change = 0 +retract_length = 2 +retract_length_toolchange = 10 +retract_lift = 0 +retract_lift_above = 0 +retract_lift_below = 0 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 30 +silent_mode = 0 +single_extruder_multi_material = 0 +start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; enable leveling matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n +thumbnails = +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 0 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 + +# [printer:Taz Workhorse 0.5mm] +# printer_model = TAZ_WORKHORSE +# printer_variant = 0.5 +# printer_technology = FFF +# default_print_profile = 0.25mm STANDARD @lulzbot +# default_filament_profile = Jessie PLA @lulzbot +# bed_shape = 0x0,280x0,280x280,0x280 +# deretract_speed = 20 +# end_gcode = M400 ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0 ; disable hotend\nM107 ; disable fans\nG91 ; relative positioning\nG1 E-1 F300 ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000 ; lift up and retract even more filament\nG1 E6 ; re-prime extruder\nM117 Cooling please wait ; progress indicator message on LCD\nG90 ; absolute positioning\nG1 Y0 F3000 ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000 ; present finished print\nM140 S0; cool downs\nM77 ; stop GLCD timer\nM84 ; disable steppers\nG90 ; absolute positioning\nM117 Print Complete. ; print complete message\n +# extra_loading_move = -2 +# extruder_colour = "" +# extruder_offset = 0x0 +# gcode_flavor = marlin +# high_current_on_filament_swap = 0 +# machine_max_acceleration_e = 3000 +# machine_max_acceleration_extruding = 500 +# machine_max_acceleration_retracting = 2000 +# machine_max_acceleration_x = 9000 +# machine_max_acceleration_y = 9000 +# machine_max_acceleration_z = 100 +# machine_max_feedrate_e = 40 +# machine_max_feedrate_x = 300 +# machine_max_feedrate_y = 300 +# machine_max_feedrate_z = 25 +# machine_max_jerk_e = 10 +# machine_max_jerk_x = 8 +# machine_max_jerk_y = 8 +# machine_max_jerk_z = 0.4 +# machine_min_extruding_rate = 0 +# machine_min_travel_rate = 0 +# machine_limits_usage = time_estimate_only +# max_layer_height = 0 +# max_print_height = 285 +# min_layer_height = 0.07 +# nozzle_diameter = 0.5 +# remaining_times = 0 +# retract_before_travel = 2 +# retract_before_wipe = 0% +# retract_layer_change = 0 +# retract_length = 2 +# retract_length_toolchange = 10 +# retract_lift = 0 +# retract_speed = 40 +# silent_mode = 0 +# single_extruder_multi_material = 0 +# start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ Workhorse with HE Tool Head\n;\n;The following lines can be uncommented for printer specific fine tuning\n;More information can be found at https://marlinfw.org/meta/gcode/\n;\n;M92 E420 ;Set Axis Steps-per-unit\n;M301 P21.0 I1.78 D61.93 ;Set Hotend PID\n;M906 E160 ;Digipot Motor Current ((875mA-750)/5+135) = 160\n;\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable previous leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 ; Home all axis\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\n;M206 X0 Y0 Z0 ; uncomment to adjust wipe position (+X ~ nozzle moves left)(+Y ~ nozzle moves forward)(+Z ~ nozzle moves down)\nG12 ; wiping sequence\nM206 X0 Y0 Z0 ; reseting stock nozzle position ### CAUTION: changing this line can affect print quality ###\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X288 Y-10 F4000; move above first probe point\nM204 S100 ; set probing acceleration\nG29 ; start auto-leveling sequence\nM420 S1 ; activate bed level matrix\nM425 Z ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]} ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ Workhorse Printing... ; progress indicator message on LCD +# use_relative_e_distances = 0 +# use_volumetric_e = 0 +# variable_layer_height = 1 +# wipe = 1 +# z_offset = 0 diff --git a/live/Lulzbot/index.idx b/live/Lulzbot/index.idx index 1f075b2..e182c33 100644 --- a/live/Lulzbot/index.idx +++ b/live/Lulzbot/index.idx @@ -1,4 +1,5 @@ min_slic3r_version = 2.3.0-beta2 +0.1.0 General rework. Added new print and filament profiles. 0.0.2 Removed obsolete host keys min_slic3r_version = 2.2.0-alpha3 0.0.1 Initial version