diff --git a/Slic3r settings MK2/simple.ini b/Slic3r settings MK2/simple.ini deleted file mode 100644 index a327c57..0000000 --- a/Slic3r settings MK2/simple.ini +++ /dev/null @@ -1,116 +0,0 @@ -# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017 -avoid_crossing_perimeters = 1 -bed_shape = 0x0,200x0,200x200,0x200 -bed_temperature = 0 -bottom_solid_layers = 3 -bridge_acceleration = 0 -bridge_fan_speed = 100 -bridge_flow_ratio = 1 -bridge_speed = 60 -brim_width = 0 -complete_objects = 0 -cooling = 1 -default_acceleration = 0 -disable_fan_first_layers = 1 -dont_support_bridges = 1 -duplicate_distance = 6 -end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors -external_fill_pattern = rectilinear -external_perimeter_speed = 70% -external_perimeters_first = 0 -extra_perimeters = 1 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extruder_offset = 0x0 -extrusion_axis = E -extrusion_multiplier = 1 -extrusion_width = 0 -fan_always_on = 0 -fan_below_layer_time = 60 -filament_diameter = 2.95 -fill_angle = 45 -fill_density = 30% -fill_pattern = rectilinear -first_layer_acceleration = 0 -first_layer_bed_temperature = 0 -first_layer_extrusion_width = 200% -first_layer_height = 0.4 -first_layer_speed = 30% -first_layer_temperature = 0 -gap_fill_speed = 20 -gcode_comments = 0 -gcode_flavor = reprap -infill_acceleration = 0 -infill_every_layers = 10 -infill_extruder = 1 -infill_extrusion_width = 0 -infill_first = 0 -infill_only_where_needed = 0 -infill_speed = 60 -interface_shells = 0 -layer_gcode = -layer_height = 0.3 -max_fan_speed = 100 -min_fan_speed = 35 -min_print_speed = 10 -min_skirt_length = 0 -notes = -nozzle_diameter = 0.4 -only_retract_when_crossing_perimeters = 1 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 1 -perimeter_acceleration = 0 -perimeter_extruder = 1 -perimeter_extrusion_width = 0 -perimeter_speed = 30 -perimeters = 3 -post_process = -raft_layers = 0 -resolution = 0 -retract_before_travel = 2 -retract_layer_change = 1 -retract_length = 0.6 -retract_length_toolchange = 10 -retract_lift = 0 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 -retract_speed = 30 -seam_position = aligned -skirt_distance = 6 -skirt_height = 1 -skirts = 1 -slowdown_below_layer_time = 30 -small_perimeter_speed = 30 -solid_infill_below_area = 70 -solid_infill_every_layers = 0 -solid_infill_extrusion_width = 0 -solid_infill_speed = 60 -spiral_vase = 0 -standby_temperature_delta = -5 -start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0 F1000.0\nG1 Y100.0 E2.3 F1000.0\nG92 Z[layer_height]\nG92 E0.0 -support_material = 0 -support_material_angle = 0 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 3 -support_material_interface_spacing = 0 -support_material_interface_speed = 100% -support_material_pattern = pillars -support_material_spacing = 2.5 -support_material_speed = 60 -support_material_threshold = 0 -temperature = 0 -thin_walls = 1 -threads = 2 -toolchange_gcode = -top_infill_extrusion_width = 0 -top_solid_infill_speed = 50 -top_solid_layers = 3 -travel_speed = 100 -use_firmware_retraction = 0 -use_relative_e_distances = 0 -wipe = 0 -z_offset = 0 diff --git a/Slic3r settings MK2/slic3r.ini b/Slic3r settings MK2/slic3r.ini deleted file mode 100644 index 597cd13..0000000 --- a/Slic3r settings MK2/slic3r.ini +++ /dev/null @@ -1,24 +0,0 @@ -# generated by Slic3r 1.35.3.3-prusa3d-win64 on Wed Jun 14 13:38:56 2017 -autocenter = -background_processing = 0 -last_output_path = C:\Users\Jindřich Beneš\Desktop -main_frame_maximized = -main_frame_pos = 69,42 -main_frame_size = 900,623 -mode = expert -no_controller = 1 -no_defaults = 1 -version = 1.35.3.3-prusa3d-win64 -version_check = 1 - -[presets] -filament = Prusa PLA 1.75mm.ini -filament_1 = Prusa PLA 1.75mm -filament_2 = Prusa PLA 1.75mm -filament_3 = Prusa PLA 1.75mm -print = 0.15mm OPTIMAL.ini -printer = Original Prusa i3 MK2 with ZHop.ini - -[recent] -config_directory = C:\Users\Jindřich Beneš\Desktop -skein_directory = C:\Users\Jindřich Beneš\Desktop\dual extrusion konkurence diff --git a/Slic3r settings MK2MM/filament/ColorFabb HT 1.75mm.ini b/Slic3r settings MK2MM/filament/ColorFabb HT 1.75mm.ini deleted file mode 100644 index 038dd3c..0000000 --- a/Slic3r settings MK2MM/filament/ColorFabb HT 1.75mm.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.37.0.7-prusa3d-win64 on Thu Aug 17 13:04:36 2017 -bed_temperature = 105 -bridge_fan_speed = 30 -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 10 -filament_colour = #ACFDF8 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 105 -first_layer_temperature = 270 -max_fan_speed = 20 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 8 -start_filament_gcode = "; Filament gcode\n" -temperature = 270 diff --git a/Slic3r settings MK2MM/filament/ColorFabb PLA-PHA.ini b/Slic3r settings MK2MM/filament/ColorFabb PLA-PHA.ini deleted file mode 100644 index d61ad52..0000000 --- a/Slic3r settings MK2MM/filament/ColorFabb PLA-PHA.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:42:47 2017 -bed_temperature = 55 -bridge_fan_speed = 100 -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 55 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 25 -start_filament_gcode = "; Filament gcode\n" -temperature = 210 diff --git a/Slic3r settings MK2MM/filament/ColorFabb Woodfill 1.75mm.ini b/Slic3r settings MK2MM/filament/ColorFabb Woodfill 1.75mm.ini deleted file mode 100644 index f433187..0000000 --- a/Slic3r settings MK2MM/filament/ColorFabb Woodfill 1.75mm.ini +++ /dev/null @@ -1,18 +0,0 @@ -# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017 -bed_temperature = 50 -bridge_fan_speed = 100 -cooling = 1 -disable_fan_first_layers = 1 -extrusion_multiplier = 1.2 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #5A4110 -filament_diameter = 1.75 -filament_settings_id = -first_layer_bed_temperature = 50 -first_layer_temperature = 200 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 5 -slowdown_below_layer_time = 20 -temperature = 200 diff --git a/Slic3r settings MK2MM/filament/ColorFabb XT 1.75mm.ini b/Slic3r settings MK2MM/filament/ColorFabb XT 1.75mm.ini deleted file mode 100644 index e8b2789..0000000 --- a/Slic3r settings MK2MM/filament/ColorFabb XT 1.75mm.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.37.0.7-prusa3d-win64 on Thu Aug 17 13:05:28 2017 -bed_temperature = 65 -bridge_fan_speed = 50 -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #A36FFD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 90 -first_layer_temperature = 240 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 15 -start_filament_gcode = "; Filament gcode\n" -temperature = 240 diff --git a/Slic3r settings MK2MM/filament/ColorFabb XT-CF20 1.75mm.ini b/Slic3r settings MK2MM/filament/ColorFabb XT-CF20 1.75mm.ini deleted file mode 100644 index e1b8624..0000000 --- a/Slic3r settings MK2MM/filament/ColorFabb XT-CF20 1.75mm.ini +++ /dev/null @@ -1,24 +0,0 @@ -# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017 -bed_temperature = 90 -bridge_fan_speed = 50 -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1.2 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #000000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 1 -filament_notes = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 90 -first_layer_temperature = 260 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 15 -temperature = 260 diff --git a/Slic3r settings MK2MM/filament/ColorFabb nGen 1.75mm.ini b/Slic3r settings MK2MM/filament/ColorFabb nGen 1.75mm.ini deleted file mode 100644 index 3b67d10..0000000 --- a/Slic3r settings MK2MM/filament/ColorFabb nGen 1.75mm.ini +++ /dev/null @@ -1,24 +0,0 @@ -# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:26:24 2017 -bed_temperature = 85 -bridge_fan_speed = 40 -cooling = 1 -disable_fan_first_layers = 3 -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 10 -filament_colour = #ACFDF8 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = NGEN -first_layer_bed_temperature = 85 -first_layer_temperature = 240 -max_fan_speed = 35 -min_fan_speed = 20 -min_print_speed = 5 -slowdown_below_layer_time = 8 -temperature = 240 diff --git a/Slic3r settings MK2MM/filament/E3D Edge.ini b/Slic3r settings MK2MM/filament/E3D Edge.ini deleted file mode 100644 index 9a9b117..0000000 --- a/Slic3r settings MK2MM/filament/E3D Edge.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:47:49 2017 -bed_temperature = 90 -bridge_fan_speed = 50 -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #B5F5FD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 85 -first_layer_temperature = 230 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 15 -start_filament_gcode = "; Filament gcode\n" -temperature = 240 diff --git a/Slic3r settings MK2MM/filament/E3D PC-ABS 1.75mm.ini b/Slic3r settings MK2MM/filament/E3D PC-ABS 1.75mm.ini deleted file mode 100644 index 4baac1a..0000000 --- a/Slic3r settings MK2MM/filament/E3D PC-ABS 1.75mm.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.37.0.7-prusa3d-win64 on Fri Aug 25 14:29:32 2017 -bed_temperature = 100 -bridge_fan_speed = 30 -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 100 -first_layer_temperature = 270 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 15 -start_filament_gcode = "; Filament gcode\n" -temperature = 270 diff --git a/Slic3r settings MK2MM/filament/Fillamentum ABS 1.75mm.ini b/Slic3r settings MK2MM/filament/Fillamentum ABS 1.75mm.ini deleted file mode 100644 index 2bc1bfb..0000000 --- a/Slic3r settings MK2MM/filament/Fillamentum ABS 1.75mm.ini +++ /dev/null @@ -1,24 +0,0 @@ -# generated by Slic3r 1.35.0.23-prusa3d-win64 on Mon Jun 5 15:23:45 2017 -bed_temperature = 100 -bridge_fan_speed = 30 -cooling = 0 -disable_fan_first_layers = 3 -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 100 -first_layer_temperature = 240 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 15 -temperature = 240 diff --git a/Slic3r settings MK2MM/filament/Fillamentum CPE HG100 HM100.ini b/Slic3r settings MK2MM/filament/Fillamentum CPE HG100 HM100.ini deleted file mode 100644 index 98764e0..0000000 --- a/Slic3r settings MK2MM/filament/Fillamentum CPE HG100 HM100.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.37.0.7-prusa3d-win64 on Tue Aug 29 15:46:46 2017 -bed_temperature = 90 -bridge_fan_speed = 50 -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #B5F5FD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "CPE HG100 , CPE HM100" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 90 -first_layer_temperature = 260 -max_fan_speed = 80 -min_fan_speed = 80 -min_print_speed = 5 -slowdown_below_layer_time = 15 -start_filament_gcode = "; Filament gcode\n" -temperature = 260 diff --git a/Slic3r settings MK2MM/filament/Fillamentum Timberfil.ini b/Slic3r settings MK2MM/filament/Fillamentum Timberfil.ini deleted file mode 100644 index 64b275c..0000000 --- a/Slic3r settings MK2MM/filament/Fillamentum Timberfil.ini +++ /dev/null @@ -1,22 +0,0 @@ -# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017 -bed_temperature = 55 -bridge_fan_speed = 100 -cooling = 1 -disable_fan_first_layers = 1 -extrusion_multiplier = 1.2 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "" -filament_settings_id = -first_layer_bed_temperature = 55 -first_layer_temperature = 190 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 25 -temperature = 190 diff --git a/Slic3r settings MK2MM/filament/Generic ABS 1.75mm.ini b/Slic3r settings MK2MM/filament/Generic ABS 1.75mm.ini deleted file mode 100644 index 8ad3c33..0000000 --- a/Slic3r settings MK2MM/filament/Generic ABS 1.75mm.ini +++ /dev/null @@ -1,19 +0,0 @@ -# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017 -bed_temperature = 100 -bridge_fan_speed = 30 -cooling = 0 -disable_fan_first_layers = 3 -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_diameter = 1.75 -filament_settings_id = -filament_type = ABS -first_layer_bed_temperature = 100 -first_layer_temperature = 255 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 15 -temperature = 255 diff --git a/Slic3r settings MK2MM/filament/Generic PET 1.75mm.ini b/Slic3r settings MK2MM/filament/Generic PET 1.75mm.ini deleted file mode 100644 index efbe2c7..0000000 --- a/Slic3r settings MK2MM/filament/Generic PET 1.75mm.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:43:21 2017 -bed_temperature = 90 -bridge_fan_speed = 50 -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #B5F5FD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 85 -first_layer_temperature = 230 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 15 -start_filament_gcode = "; Filament gcode\n" -temperature = 240 diff --git a/Slic3r settings MK2MM/filament/Generic PLA 1.75mm.ini b/Slic3r settings MK2MM/filament/Generic PLA 1.75mm.ini deleted file mode 100644 index d61ad52..0000000 --- a/Slic3r settings MK2MM/filament/Generic PLA 1.75mm.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:42:47 2017 -bed_temperature = 55 -bridge_fan_speed = 100 -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 55 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 25 -start_filament_gcode = "; Filament gcode\n" -temperature = 210 diff --git a/Slic3r settings MK2MM/filament/Primaselect PVA.ini b/Slic3r settings MK2MM/filament/Primaselect PVA.ini deleted file mode 100644 index 2456929..0000000 --- a/Slic3r settings MK2MM/filament/Primaselect PVA.ini +++ /dev/null @@ -1,24 +0,0 @@ -# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:11:57 2017 -bed_temperature = 55 -bridge_fan_speed = 100 -cooling = 0 -disable_fan_first_layers = 1 -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 100 -filament_colour = #FFD1A4 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 1 -filament_type = PVA -first_layer_bed_temperature = 55 -first_layer_temperature = 195 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 25 -temperature = 195 diff --git a/Slic3r settings MK2MM/filament/Prusa ABS 1.75mm.ini b/Slic3r settings MK2MM/filament/Prusa ABS 1.75mm.ini deleted file mode 100644 index fdf9a13..0000000 --- a/Slic3r settings MK2MM/filament/Prusa ABS 1.75mm.ini +++ /dev/null @@ -1,24 +0,0 @@ -# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:02 2017 -bed_temperature = 100 -bridge_fan_speed = 30 -cooling = 0 -disable_fan_first_layers = 3 -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 100 -first_layer_temperature = 255 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 15 -temperature = 255 diff --git a/Slic3r settings MK2MM/filament/Prusa HIPS 1.75mm.ini b/Slic3r settings MK2MM/filament/Prusa HIPS 1.75mm.ini deleted file mode 100644 index d59eb77..0000000 --- a/Slic3r settings MK2MM/filament/Prusa HIPS 1.75mm.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:14 2017 -bed_temperature = 100 -bridge_fan_speed = 50 -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 0.9 -fan_always_on = 1 -fan_below_layer_time = 10 -filament_colour = #FFE130 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = HIPS -first_layer_bed_temperature = 100 -first_layer_temperature = 220 -max_fan_speed = 20 -min_fan_speed = 20 -min_print_speed = 5 -slowdown_below_layer_time = 5 -start_filament_gcode = "; Filament gcode\n" -temperature = 220 diff --git a/Slic3r settings MK2MM/filament/Prusa PET 1.75mm.ini b/Slic3r settings MK2MM/filament/Prusa PET 1.75mm.ini deleted file mode 100644 index f86f60d..0000000 --- a/Slic3r settings MK2MM/filament/Prusa PET 1.75mm.ini +++ /dev/null @@ -1,24 +0,0 @@ -# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:09 2017 -bed_temperature = 90 -bridge_fan_speed = 50 -cooling = 1 -disable_fan_first_layers = 3 -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #B5F5FD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 85 -first_layer_temperature = 230 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 15 -temperature = 240 diff --git a/Slic3r settings MK2MM/filament/Prusa PLA 1.75mm.ini b/Slic3r settings MK2MM/filament/Prusa PLA 1.75mm.ini deleted file mode 100644 index f6963ac..0000000 --- a/Slic3r settings MK2MM/filament/Prusa PLA 1.75mm.ini +++ /dev/null @@ -1,24 +0,0 @@ -# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:12:50 2017 -bed_temperature = 55 -bridge_fan_speed = 100 -cooling = 1 -disable_fan_first_layers = 1 -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 55 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 25 -temperature = 210 diff --git a/Slic3r settings MK2MM/filament/Taulman T-Glase 1.75mm.ini b/Slic3r settings MK2MM/filament/Taulman T-Glase 1.75mm.ini deleted file mode 100644 index 7deb0e1..0000000 --- a/Slic3r settings MK2MM/filament/Taulman T-Glase 1.75mm.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.37.0.39-prusa3d-win64 on Fri Sep 8 16:04:45 2017 -bed_temperature = 90 -bridge_fan_speed = 40 -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #FD0200 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 90 -first_layer_temperature = 240 -max_fan_speed = 5 -min_fan_speed = 0 -min_print_speed = 5 -slowdown_below_layer_time = 15 -start_filament_gcode = "; Filament gcode\n" -temperature = 240 diff --git a/Slic3r settings MK2MM/filament/Verbatim BVOH.ini b/Slic3r settings MK2MM/filament/Verbatim BVOH.ini deleted file mode 100644 index 45d7928..0000000 --- a/Slic3r settings MK2MM/filament/Verbatim BVOH.ini +++ /dev/null @@ -1,26 +0,0 @@ -# generated by Slic3r 1.35.5.16-prusa3d-win64 on Thu Jul 6 09:59:30 2017 -bed_temperature = 55 -bridge_fan_speed = 100 -cooling = 0 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 0 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 55 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 25 -start_filament_gcode = "; Filament gcode\n" -temperature = 210 diff --git a/Slic3r settings MK2MM/simple.ini b/Slic3r settings MK2MM/simple.ini deleted file mode 100644 index a327c57..0000000 --- a/Slic3r settings MK2MM/simple.ini +++ /dev/null @@ -1,116 +0,0 @@ -# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017 -avoid_crossing_perimeters = 1 -bed_shape = 0x0,200x0,200x200,0x200 -bed_temperature = 0 -bottom_solid_layers = 3 -bridge_acceleration = 0 -bridge_fan_speed = 100 -bridge_flow_ratio = 1 -bridge_speed = 60 -brim_width = 0 -complete_objects = 0 -cooling = 1 -default_acceleration = 0 -disable_fan_first_layers = 1 -dont_support_bridges = 1 -duplicate_distance = 6 -end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors -external_fill_pattern = rectilinear -external_perimeter_speed = 70% -external_perimeters_first = 0 -extra_perimeters = 1 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extruder_offset = 0x0 -extrusion_axis = E -extrusion_multiplier = 1 -extrusion_width = 0 -fan_always_on = 0 -fan_below_layer_time = 60 -filament_diameter = 2.95 -fill_angle = 45 -fill_density = 30% -fill_pattern = rectilinear -first_layer_acceleration = 0 -first_layer_bed_temperature = 0 -first_layer_extrusion_width = 200% -first_layer_height = 0.4 -first_layer_speed = 30% -first_layer_temperature = 0 -gap_fill_speed = 20 -gcode_comments = 0 -gcode_flavor = reprap -infill_acceleration = 0 -infill_every_layers = 10 -infill_extruder = 1 -infill_extrusion_width = 0 -infill_first = 0 -infill_only_where_needed = 0 -infill_speed = 60 -interface_shells = 0 -layer_gcode = -layer_height = 0.3 -max_fan_speed = 100 -min_fan_speed = 35 -min_print_speed = 10 -min_skirt_length = 0 -notes = -nozzle_diameter = 0.4 -only_retract_when_crossing_perimeters = 1 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 1 -perimeter_acceleration = 0 -perimeter_extruder = 1 -perimeter_extrusion_width = 0 -perimeter_speed = 30 -perimeters = 3 -post_process = -raft_layers = 0 -resolution = 0 -retract_before_travel = 2 -retract_layer_change = 1 -retract_length = 0.6 -retract_length_toolchange = 10 -retract_lift = 0 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 -retract_speed = 30 -seam_position = aligned -skirt_distance = 6 -skirt_height = 1 -skirts = 1 -slowdown_below_layer_time = 30 -small_perimeter_speed = 30 -solid_infill_below_area = 70 -solid_infill_every_layers = 0 -solid_infill_extrusion_width = 0 -solid_infill_speed = 60 -spiral_vase = 0 -standby_temperature_delta = -5 -start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0 F1000.0\nG1 Y100.0 E2.3 F1000.0\nG92 Z[layer_height]\nG92 E0.0 -support_material = 0 -support_material_angle = 0 -support_material_enforce_layers = 0 -support_material_extruder = 1 -support_material_extrusion_width = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 3 -support_material_interface_spacing = 0 -support_material_interface_speed = 100% -support_material_pattern = pillars -support_material_spacing = 2.5 -support_material_speed = 60 -support_material_threshold = 0 -temperature = 0 -thin_walls = 1 -threads = 2 -toolchange_gcode = -top_infill_extrusion_width = 0 -top_solid_infill_speed = 50 -top_solid_layers = 3 -travel_speed = 100 -use_firmware_retraction = 0 -use_relative_e_distances = 0 -wipe = 0 -z_offset = 0 diff --git a/Slic3r settings MK2MM/slic3r.ini b/Slic3r settings MK2MM/slic3r.ini deleted file mode 100644 index c61463b..0000000 --- a/Slic3r settings MK2MM/slic3r.ini +++ /dev/null @@ -1,24 +0,0 @@ -# generated by Slic3r 1.34.1.24-prusa3d-win64 on Wed Jun 14 13:41:34 2017 -autocenter = -background_processing = 0 -last_output_path = C:\Users\Jindřich Beneš\Desktop\dual extrusion konkurence -main_frame_maximized = -main_frame_pos = 47,69 -main_frame_size = 1060,675 -mode = expert -no_controller = 1 -no_defaults = 1 -version = 1.34.1.24-prusa3d-win64 -version_check = 1 - -[presets] -filament = Prusa PLA 1.75mm.ini -filament_1 = Prusa PLA 1.75mm -filament_2 = Prusa PLA 1.75mm -filament_3 = Prusa PLA 1.75mm -print = 0.20mm NORMAL.ini -printer = Original Prusa i3 MK2 MultiMaterial.ini - -[recent] -config_directory = C:\Users\Jindřich Beneš\Desktop -skein_directory = C:\Users\Jindřich Beneš\Desktop\dual extrusion konkurence diff --git a/Slic3r settings MK2/filament/ColorFabb Brass Bronze 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Brass Bronze 1.75mm.ini similarity index 62% rename from Slic3r settings MK2/filament/ColorFabb Brass Bronze 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Brass Bronze 1.75mm.ini index 7716677..23ae928 100644 --- a/Slic3r settings MK2/filament/ColorFabb Brass Bronze 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Brass Bronze 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 50 -bridge_fan_speed = 100 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1.3 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #B79A39 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 50 -first_layer_temperature = 210 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 210 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:59:23 +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = nozzle_diameter[0]>0.35 +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.3 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #804040 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 210 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 210 diff --git a/Slic3r settings MK2/filament/ColorFabb HT 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb HT 1.75mm.ini similarity index 71% rename from Slic3r settings MK2/filament/ColorFabb HT 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb HT 1.75mm.ini index be5b152..3f68f53 100644 --- a/Slic3r settings MK2/filament/ColorFabb HT 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb HT 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 105 -bridge_fan_speed = 30 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 10 -filament_colour = #ACFDF8 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 105 -first_layer_temperature = 270 -max_fan_speed = 20 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K45 ; Filament gcode" -temperature = 270 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:49:09 +bed_temperature = 105 +bridge_fan_speed = 30 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 105 +first_layer_temperature = 270 +max_fan_speed = 20 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +temperature = 270 diff --git a/Slic3r settings MK2/filament/ColorFabb PLA-PHA.ini b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb PLA-PHA.ini similarity index 72% rename from Slic3r settings MK2/filament/ColorFabb PLA-PHA.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb PLA-PHA.ini index 4ad6351..c84927f 100644 --- a/Slic3r settings MK2/filament/ColorFabb PLA-PHA.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb PLA-PHA.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 55 -bridge_fan_speed = 100 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 15 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 55 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 210 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:49:28 +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 15 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 210 diff --git a/Slic3r settings MK2/filament/ColorFabb Woodfil 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Woodfil 1.75mm.ini similarity index 62% rename from Slic3r settings MK2/filament/ColorFabb Woodfil 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Woodfil 1.75mm.ini index 1e42dfb..abf3fa6 100644 --- a/Slic3r settings MK2/filament/ColorFabb Woodfil 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Woodfil 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 50 -bridge_fan_speed = 100 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1.2 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #5A4110 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 50 -first_layer_temperature = 200 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 200 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:59:34 +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = nozzle_diameter[0]>0.35 +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.2 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #804040 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 200 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 200 diff --git a/Slic3r settings MK2/filament/ColorFabb XT 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT 1.75mm.ini similarity index 62% rename from Slic3r settings MK2/filament/ColorFabb XT 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT 1.75mm.ini index 6fbb4ac..5c7cffc 100644 --- a/Slic3r settings MK2/filament/ColorFabb XT 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 65 -bridge_fan_speed = 50 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #A36FFD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 90 -first_layer_temperature = 240 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K45 ; Filament gcode" -temperature = 240 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:49:53 +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +temperature = 270 diff --git a/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT-CF20 1.75mm.ini similarity index 68% rename from Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT-CF20 1.75mm.ini index df2805b..74c93df 100644 --- a/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT-CF20 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1.2 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #000000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 1 -filament_notes = -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 90 -first_layer_temperature = 260 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 260 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:05 +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.2 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #804040 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 1 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 260 diff --git a/Slic3r settings MK2/filament/ColorFabb nGen 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen 1.75mm.ini similarity index 71% rename from Slic3r settings MK2/filament/ColorFabb nGen 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen 1.75mm.ini index 8280308..4f7ee40 100644 --- a/Slic3r settings MK2/filament/ColorFabb nGen 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 85 -bridge_fan_speed = 40 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 10 -filament_colour = #ACFDF8 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = NGEN -first_layer_bed_temperature = 85 -first_layer_temperature = 240 -max_fan_speed = 35 -min_fan_speed = 20 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K45 ; Filament gcode" -temperature = 240 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:19 +bed_temperature = 85 +bridge_fan_speed = 40 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = NGEN +first_layer_bed_temperature = 85 +first_layer_temperature = 240 +max_fan_speed = 35 +min_fan_speed = 20 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +temperature = 240 diff --git a/Slic3r settings MK2/filament/ColorFabb nGen flex.ini b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen flex.ini similarity index 71% rename from Slic3r settings MK2/filament/ColorFabb nGen flex.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen flex.ini index 9bb449b..6f80dec 100644 --- a/Slic3r settings MK2/filament/ColorFabb nGen flex.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen flex.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 85 -bridge_fan_speed = 40 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 10 -filament_colour = #ACFDF8 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 5 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = FLEX -first_layer_bed_temperature = 85 -first_layer_temperature = 260 -max_fan_speed = 35 -min_fan_speed = 20 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 260 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:31 +bed_temperature = 85 +bridge_fan_speed = 40 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 10 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 5 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = FLEX +first_layer_bed_temperature = 85 +first_layer_temperature = 260 +max_fan_speed = 35 +min_fan_speed = 20 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 260 diff --git a/Slic3r settings MK2/filament/E3D Edge.ini b/Slic3r settings MK2S MK2MM and MK3/filament/E3D Edge.ini similarity index 74% rename from Slic3r settings MK2/filament/E3D Edge.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/E3D Edge.ini index e507e40..819f74d 100644 --- a/Slic3r settings MK2/filament/E3D Edge.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/E3D Edge.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #B5F5FD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 85 -first_layer_temperature = 230 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K45 ; Filament gcode" -temperature = 240 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:45 +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +temperature = 240 diff --git a/Slic3r settings MK2/filament/E3D PC-ABS 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/E3D PC-ABS 1.75mm.ini similarity index 74% rename from Slic3r settings MK2/filament/E3D PC-ABS 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/E3D PC-ABS 1.75mm.ini index 000511b..44fbd43 100644 --- a/Slic3r settings MK2/filament/E3D PC-ABS 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/E3D PC-ABS 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 100 -first_layer_temperature = 270 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 270 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:54 +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 100 +first_layer_temperature = 270 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 270 diff --git a/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ABS 1.75mm.ini similarity index 74% rename from Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ABS 1.75mm.ini index 1d2dc56..4c68dd1 100644 --- a/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ABS 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 100 -first_layer_temperature = 240 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 240 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:07 +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = ABS +first_layer_bed_temperature = 100 +first_layer_temperature = 240 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 240 diff --git a/Slic3r settings MK2/filament/Fillamentum ASA 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ASA 1.75mm.ini similarity index 71% rename from Slic3r settings MK2/filament/Fillamentum ASA 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ASA 1.75mm.ini index 452bc10..fb2d7e3 100644 --- a/Slic3r settings MK2/filament/Fillamentum ASA 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ASA 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #FF8000 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 100 -first_layer_temperature = 265 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 265 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:19 +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 100 +first_layer_temperature = 265 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 265 diff --git a/Slic3r settings MK2/filament/Fillamentum CPE HG100 HM100.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum CPE HG100 HM100.ini similarity index 71% rename from Slic3r settings MK2/filament/Fillamentum CPE HG100 HM100.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum CPE HG100 HM100.ini index e6a0ea0..e2b95cc 100644 --- a/Slic3r settings MK2/filament/Fillamentum CPE HG100 HM100.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum CPE HG100 HM100.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #B5F5FD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "CPE HG100 , CPE HM100" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 90 -first_layer_temperature = 260 -max_fan_speed = 80 -min_fan_speed = 80 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K45 ; Filament gcode" -temperature = 260 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:33 +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "CPE HG100 , CPE HM100" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 90 +first_layer_temperature = 260 +max_fan_speed = 80 +min_fan_speed = 80 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +temperature = 260 diff --git a/Slic3r settings MK2/filament/Fillamentum Timberfil.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum Timberfil.ini similarity index 62% rename from Slic3r settings MK2/filament/Fillamentum Timberfil.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum Timberfil.ini index 2c2e266..0f4b64a 100644 --- a/Slic3r settings MK2/filament/Fillamentum Timberfil.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum Timberfil.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 55 -bridge_fan_speed = 100 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1.2 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 55 -first_layer_temperature = 190 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 190 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 16:00:00 +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = nozzle_diameter[0]>0.35 +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.2 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #804040 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 190 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 190 diff --git a/Slic3r settings MK2/filament/Generic ABS 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Generic ABS 1.75mm.ini similarity index 77% rename from Slic3r settings MK2/filament/Generic ABS 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Generic ABS 1.75mm.ini index cc06669..4e61576 100644 --- a/Slic3r settings MK2/filament/Generic ABS 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Generic ABS 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 100 -first_layer_temperature = 255 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 255 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:54 +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" +filament_settings_id = +filament_soluble = 0 +filament_type = ABS +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 255 diff --git a/Slic3r settings MK2/filament/Generic PET 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Generic PET 1.75mm.ini similarity index 74% rename from Slic3r settings MK2/filament/Generic PET 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Generic PET 1.75mm.ini index e507e40..61b7ae1 100644 --- a/Slic3r settings MK2/filament/Generic PET 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Generic PET 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #B5F5FD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 85 -first_layer_temperature = 230 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K45 ; Filament gcode" -temperature = 240 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:04 +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +temperature = 240 diff --git a/Slic3r settings MK2/filament/Generic PLA 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Generic PLA 1.75mm.ini similarity index 72% rename from Slic3r settings MK2/filament/Generic PLA 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Generic PLA 1.75mm.ini index 4ad6351..f5317c4 100644 --- a/Slic3r settings MK2/filament/Generic PLA 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Generic PLA 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 55 -bridge_fan_speed = 100 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 15 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 55 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 210 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:16 +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 15 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 210 diff --git a/Slic3r settings MK2/filament/Polymaker PC-Max.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Polymaker PC-Max.ini similarity index 77% rename from Slic3r settings MK2/filament/Polymaker PC-Max.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Polymaker PC-Max.ini index 6c2fb6e..2439c40 100644 --- a/Slic3r settings MK2/filament/Polymaker PC-Max.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Polymaker PC-Max.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 120 -bridge_fan_speed = 30 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 120 -first_layer_temperature = 270 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 270 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:26 +bed_temperature = 120 +bridge_fan_speed = 30 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" +filament_settings_id = +filament_soluble = 0 +filament_type = ABS +first_layer_bed_temperature = 120 +first_layer_temperature = 270 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 270 diff --git a/Slic3r settings MK2/filament/Primavalue PVA.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Primavalue PVA.ini similarity index 69% rename from Slic3r settings MK2/filament/Primavalue PVA.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Primavalue PVA.ini index f42ec95..90fc51c 100644 --- a/Slic3r settings MK2/filament/Primavalue PVA.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Primavalue PVA.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 55 -bridge_fan_speed = 100 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 100 -filament_colour = #FFD1A4 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 1 -filament_type = PVA -first_layer_bed_temperature = 55 -first_layer_temperature = 195 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 195 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:38 +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #FFFFD7 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 1 +filament_type = PVA +first_layer_bed_temperature = 60 +first_layer_temperature = 195 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 195 diff --git a/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Prusa ABS 1.75mm.ini similarity index 77% rename from Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Prusa ABS 1.75mm.ini index cc06669..ec2205b 100644 --- a/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Prusa ABS 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 100 -bridge_fan_speed = 30 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #3A80CA -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" -filament_settings_id = -filament_soluble = 0 -filament_type = ABS -first_layer_bed_temperature = 100 -first_layer_temperature = 255 -max_fan_speed = 30 -min_fan_speed = 10 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 255 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:48 +bed_temperature = 100 +bridge_fan_speed = 30 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #3A80CA +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS" +filament_settings_id = +filament_soluble = 0 +filament_type = ABS +first_layer_bed_temperature = 100 +first_layer_temperature = 255 +max_fan_speed = 30 +min_fan_speed = 10 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 255 diff --git a/Slic3r settings MK2/filament/Prusa HIPS 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Prusa HIPS 1.75mm.ini similarity index 71% rename from Slic3r settings MK2/filament/Prusa HIPS 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Prusa HIPS 1.75mm.ini index 906bc17..2f63ad8 100644 --- a/Slic3r settings MK2/filament/Prusa HIPS 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Prusa HIPS 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 100 -bridge_fan_speed = 50 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 0.9 -fan_always_on = 1 -fan_below_layer_time = 10 -filament_colour = #FFE130 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 13 -filament_notes = "" -filament_settings_id = -filament_soluble = 1 -filament_type = HIPS -first_layer_bed_temperature = 100 -first_layer_temperature = 220 -max_fan_speed = 20 -min_fan_speed = 20 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 220 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:59 +bed_temperature = 100 +bridge_fan_speed = 50 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 0.9 +fan_always_on = 1 +fan_below_layer_time = 10 +filament_colour = #FFFFD7 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 13 +filament_notes = "" +filament_settings_id = +filament_soluble = 1 +filament_type = HIPS +first_layer_bed_temperature = 100 +first_layer_temperature = 220 +max_fan_speed = 20 +min_fan_speed = 20 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 220 diff --git a/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Prusa PET 1.75mm.ini similarity index 74% rename from Slic3r settings MK2/filament/Prusa PET 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Prusa PET 1.75mm.ini index e507e40..df9c6db 100644 --- a/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Prusa PET 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 90 -bridge_fan_speed = 50 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 20 -filament_colour = #B5F5FD -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 85 -first_layer_temperature = 230 -max_fan_speed = 50 -min_fan_speed = 30 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K45 ; Filament gcode" -temperature = 240 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:08 +bed_temperature = 90 +bridge_fan_speed = 50 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 85 +first_layer_temperature = 230 +max_fan_speed = 50 +min_fan_speed = 30 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode" +temperature = 240 diff --git a/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Prusa PLA 1.75mm.ini similarity index 72% rename from Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Prusa PLA 1.75mm.ini index 4ad6351..c913714 100644 --- a/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Prusa PLA 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 55 -bridge_fan_speed = 100 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 15 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 55 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 210 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:18 +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #FF3232 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 15 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 210 diff --git a/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini b/Slic3r settings MK2S MK2MM and MK3/filament/SemiFlex or Flexfill 98A.ini similarity index 72% rename from Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/SemiFlex or Flexfill 98A.ini index 03c3603..a56d0dc 100644 --- a/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/SemiFlex or Flexfill 98A.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 50 -bridge_fan_speed = 100 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1.2 -fan_always_on = 0 -fan_below_layer_time = 100 -filament_colour = #00CA0A -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 5 -filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88" -filament_settings_id = -filament_soluble = 0 -filament_type = FLEX -first_layer_bed_temperature = 50 -first_layer_temperature = 220 -max_fan_speed = 90 -min_fan_speed = 70 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 230 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 16:00:18 +bed_temperature = 50 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1 +cooling = 0 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1.2 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #00CA0A +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 2.5 +filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88" +filament_settings_id = +filament_soluble = 0 +filament_type = FLEX +first_layer_bed_temperature = 50 +first_layer_temperature = 220 +max_fan_speed = 90 +min_fan_speed = 70 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 230 diff --git a/Slic3r settings MK2/filament/Taulman Bridge 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Taulman Bridge 1.75mm.ini similarity index 74% rename from Slic3r settings MK2/filament/Taulman Bridge 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Taulman Bridge 1.75mm.ini index 50f6427..4af9c5e 100644 --- a/Slic3r settings MK2/filament/Taulman Bridge 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Taulman Bridge 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 50 -bridge_fan_speed = 40 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #DEE0E6 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 90 -first_layer_temperature = 240 -max_fan_speed = 5 -min_fan_speed = 0 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 250 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:38 +bed_temperature = 50 +bridge_fan_speed = 40 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #DEE0E6 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 90 +first_layer_temperature = 240 +max_fan_speed = 5 +min_fan_speed = 0 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 250 diff --git a/Slic3r settings MK2/filament/Taulman T-Glase 1.75mm.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Taulman T-Glase 1.75mm.ini similarity index 70% rename from Slic3r settings MK2/filament/Taulman T-Glase 1.75mm.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Taulman T-Glase 1.75mm.ini index cca8233..afe3642 100644 --- a/Slic3r settings MK2/filament/Taulman T-Glase 1.75mm.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Taulman T-Glase 1.75mm.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 90 -bridge_fan_speed = 40 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 3 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 20 -filament_colour = #FD0200 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "" -filament_settings_id = -filament_soluble = 0 -filament_type = PET -first_layer_bed_temperature = 90 -first_layer_temperature = 240 -max_fan_speed = 5 -min_fan_speed = 0 -min_print_speed = 5 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K30 ; Filament gcode" -temperature = 240 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:47 +bed_temperature = 90 +bridge_fan_speed = 40 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 3 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 20 +filament_colour = #FF8000 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "" +filament_settings_id = +filament_soluble = 0 +filament_type = PET +first_layer_bed_temperature = 90 +first_layer_temperature = 240 +max_fan_speed = 5 +min_fan_speed = 0 +min_print_speed = 5 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode" +temperature = 240 diff --git a/Slic3r settings MK2/filament/Verbatim BVOH.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Verbatim BVOH.ini similarity index 72% rename from Slic3r settings MK2/filament/Verbatim BVOH.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Verbatim BVOH.ini index d0e48cc..49f3b7d 100644 --- a/Slic3r settings MK2/filament/Verbatim BVOH.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Verbatim BVOH.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 55 -bridge_fan_speed = 100 -compatible_printers = -cooling = 0 -disable_fan_first_layers = 1 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 0 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 10 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" -filament_settings_id = -filament_soluble = 1 -filament_type = PLA -first_layer_bed_temperature = 55 -first_layer_temperature = 215 -max_fan_speed = 100 -min_fan_speed = 85 -min_print_speed = 15 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 210 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:58 +bed_temperature = 60 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +cooling = 0 +disable_fan_first_layers = 1 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 0 +fan_below_layer_time = 100 +filament_colour = #FFFFD7 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 10 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH" +filament_settings_id = +filament_soluble = 1 +filament_type = PLA +first_layer_bed_temperature = 60 +first_layer_temperature = 215 +max_fan_speed = 100 +min_fan_speed = 85 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 210 diff --git a/Slic3r settings MK2/filament/Verbatim PP.ini b/Slic3r settings MK2S MK2MM and MK3/filament/Verbatim PP.ini similarity index 77% rename from Slic3r settings MK2/filament/Verbatim PP.ini rename to Slic3r settings MK2S MK2MM and MK3/filament/Verbatim PP.ini index c87cd7b..780beda 100644 --- a/Slic3r settings MK2/filament/Verbatim PP.ini +++ b/Slic3r settings MK2S MK2MM and MK3/filament/Verbatim PP.ini @@ -1,27 +1,28 @@ -# generated by Slic3r 1.37.1.25-prusa3d-win64 on -bed_temperature = 100 -bridge_fan_speed = 100 -compatible_printers = -cooling = 1 -disable_fan_first_layers = 2 -end_filament_gcode = "; Filament-specific end gcode" -extrusion_multiplier = 1 -fan_always_on = 1 -fan_below_layer_time = 100 -filament_colour = #FF14E2 -filament_cost = 0 -filament_density = 0 -filament_diameter = 1.75 -filament_max_volumetric_speed = 5 -filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA" -filament_settings_id = -filament_soluble = 0 -filament_type = PLA -first_layer_bed_temperature = 100 -first_layer_temperature = 220 -max_fan_speed = 100 -min_fan_speed = 100 -min_print_speed = 15 -slowdown_below_layer_time = 10 -start_filament_gcode = "M900 K10 ; Filament gcode" -temperature = 220 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:54:08 +bed_temperature = 100 +bridge_fan_speed = 100 +compatible_printers = +compatible_printers_condition = +cooling = 1 +disable_fan_first_layers = 2 +end_filament_gcode = "; Filament-specific end gcode" +extrusion_multiplier = 1 +fan_always_on = 1 +fan_below_layer_time = 100 +filament_colour = #DEE0E6 +filament_cost = 0 +filament_density = 0 +filament_diameter = 1.75 +filament_max_volumetric_speed = 5 +filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA" +filament_settings_id = +filament_soluble = 0 +filament_type = PLA +first_layer_bed_temperature = 100 +first_layer_temperature = 220 +max_fan_speed = 100 +min_fan_speed = 100 +min_print_speed = 15 +slowdown_below_layer_time = 10 +start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode" +temperature = 220 diff --git a/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL 0.25 nozzle.ini similarity index 89% rename from Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL 0.25 nozzle.ini index 8dd3e22..49bbde5 100644 --- a/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL 0.25 nozzle.ini @@ -1,14 +1,18 @@ -# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:46:47 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:35:08 avoid_crossing_perimeters = 0 bottom_solid_layers = 10 bridge_acceleration = 300 +bridge_angle = 0 bridge_flow_ratio = 0.7 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1 complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 diff --git a/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL MK3.ini similarity index 68% rename from Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL MK3.ini index 4dfb7fb..39ad13a 100644 --- a/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL MK3.ini @@ -1,14 +1,18 @@ -# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:47:25 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:29:11 avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_flow_ratio = 0.95 +bottom_solid_layers = 10 +bridge_acceleration = 300 +bridge_angle = 0 +bridge_flow_ratio = 0.7 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ complete_objects = 0 -default_acceleration = 1000 +default_acceleration = 500 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 @@ -19,25 +23,25 @@ extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.45 fill_angle = 45 -fill_density = 10% +fill_density = 25% fill_pattern = cubic -first_layer_acceleration = 1000 +first_layer_acceleration = 500 first_layer_extrusion_width = 0.42 first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 20 gcode_comments = 0 -infill_acceleration = 2000 +infill_acceleration = 800 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.45 +infill_extrusion_width = 0.5 infill_first = 0 infill_only_where_needed = 0 infill_overlap = 25% -infill_speed = 20 +infill_speed = 30 interface_shells = 0 -layer_height = 0.2 -max_print_speed = 100 +layer_height = 0.05 +max_print_speed = 80 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 @@ -47,11 +51,11 @@ only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 0 -perimeter_acceleration = 800 +perimeter_acceleration = 300 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 20 -perimeters = 2 +perimeter_speed = 30 +perimeters = 3 post_process = print_settings_id = raft_layers = 0 @@ -60,39 +64,39 @@ seam_position = nearest skirt_distance = 2 skirt_height = 3 skirts = 1 -small_perimeter_speed = 20 +small_perimeter_speed = 15 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 20 +solid_infill_speed = 30 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_buildplate_only = 0 -support_material_contact_distance = 0.3 +support_material_contact_distance = 0.15 support_material_enforce_layers = 0 support_material_extruder = 1 -support_material_extrusion_width = 0.35 +support_material_extrusion_width = 0.3 support_material_interface_contact_loops = 0 support_material_interface_extruder = 1 -support_material_interface_layers = 0 -support_material_interface_spacing = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 support_material_interface_speed = 100% support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 20 +support_material_spacing = 1.5 +support_material_speed = 30 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 support_material_xy_spacing = 60% thin_walls = 0 threads = 4 -top_infill_extrusion_width = 0.4 +top_infill_extrusion_width = 0.45 top_solid_infill_speed = 20 -top_solid_layers = 5 -travel_speed = 120 +top_solid_layers = 15 +travel_speed = 180 wipe_tower = 0 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 diff --git a/Slic3r settings MK2/print/0.05mm DETAIL.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL.ini similarity index 89% rename from Slic3r settings MK2/print/0.05mm DETAIL.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL.ini index bc6d452..6bb04fc 100644 --- a/Slic3r settings MK2/print/0.05mm DETAIL.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL.ini @@ -1,14 +1,18 @@ -# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:46:42 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:54:48 avoid_crossing_perimeters = 0 bottom_solid_layers = 10 bridge_acceleration = 300 +bridge_angle = 0 bridge_flow_ratio = 0.7 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 complete_objects = 0 default_acceleration = 500 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 diff --git a/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL 0.25 nozzle.ini similarity index 90% rename from Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL 0.25 nozzle.ini index 3181377..ae10191 100644 --- a/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL 0.25 nozzle.ini @@ -1,14 +1,18 @@ -# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:46:57 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:37:04 avoid_crossing_perimeters = 0 bottom_solid_layers = 7 bridge_acceleration = 600 +bridge_angle = 0 bridge_flow_ratio = 0.7 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.25 diff --git a/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL MK3.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL MK3.ini new file mode 100644 index 0000000..e74d4f5 --- /dev/null +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL MK3.ini @@ -0,0 +1,105 @@ +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:29:38 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 3500 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 35% +infill_speed = 200 +interface_shells = 0 +layer_height = 0.1 +max_print_speed = 250 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 200 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 50 +top_solid_layers = 5 +travel_speed = 250 +wipe_tower = 0 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.10mm DETAIL.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL.ini similarity index 89% rename from Slic3r settings MK2/print/0.10mm DETAIL.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL.ini index 51dad77..3158bfd 100644 --- a/Slic3r settings MK2/print/0.10mm DETAIL.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL.ini @@ -1,14 +1,18 @@ -# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:46:52 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:55:16 avoid_crossing_perimeters = 0 bottom_solid_layers = 7 bridge_acceleration = 1000 +bridge_angle = 0 bridge_flow_ratio = 0.7 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 diff --git a/Slic3r settings MK2/print/0.15mm 100mms Linear Advance.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm 100mms Linear Advance.ini similarity index 91% rename from Slic3r settings MK2/print/0.15mm 100mms Linear Advance.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.15mm 100mms Linear Advance.ini index 8b234c0..dc9c9c7 100644 --- a/Slic3r settings MK2/print/0.15mm 100mms Linear Advance.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm 100mms Linear Advance.ini @@ -1,103 +1,105 @@ -# generated by Slic3r Prusa Edition 1.38.0.28-prusa3d-CPP_presets-win64 on 2017-11-21 at 16:18:46 -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 50 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 100 -interface_shells = 0 -layer_height = 0.15 -max_print_speed = 150 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 60 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 30 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 100 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 60 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 70 -top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:57:50 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 50 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 100 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 150 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 30 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 100 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 60 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 70 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.25 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.25 nozzle.ini new file mode 100644 index 0000000..79324f8 --- /dev/null +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.25 nozzle.ini @@ -0,0 +1,105 @@ +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:38:12 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 5 +bridge_acceleration = 600 +bridge_angle = 0 +bridge_flow_ratio = 0.7 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.25 +external_perimeter_speed = 20 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.25 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.25 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 1600 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.25 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 40 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 600 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.25 +perimeter_speed = 25 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 10 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.25 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 1 +support_material_extrusion_width = 0.2 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 0 +support_material_interface_spacing = 0.15 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 1 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 35 +support_material_with_sheath = 0 +support_material_xy_spacing = 150% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.25 +top_solid_infill_speed = 30 +top_solid_layers = 7 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.15mm OPTIMAL 0.6 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.6 nozzle.ini similarity index 91% rename from Slic3r settings MK2/print/0.15mm OPTIMAL 0.6 nozzle.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.6 nozzle.ini index 68bb5fc..4de2ac4 100644 --- a/Slic3r settings MK2/print/0.15mm OPTIMAL 0.6 nozzle.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.6 nozzle.ini @@ -1,102 +1,105 @@ -# generated by Slic3r 1.36.2-prusa3d-win64 on Thu Aug 3 16:02:36 2017 -avoid_crossing_perimeters = 0 -bottom_solid_layers = 5 -bridge_acceleration = 1000 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.61 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.67 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.65 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.75 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.15 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 -perimeter_speed = 50 -perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 50 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.6 -top_solid_infill_speed = 40 -top_solid_layers = 7 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:38:26 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 5 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.61 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.15 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 50 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 40 +top_solid_layers = 7 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2MM/print/0.15mm OPTIMAL.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL MK3.ini similarity index 77% rename from Slic3r settings MK2MM/print/0.15mm OPTIMAL.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL MK3.ini index a9c55d0..233dffd 100644 --- a/Slic3r settings MK2MM/print/0.15mm OPTIMAL.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL MK3.ini @@ -1,18 +1,22 @@ -# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:53:54 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:29:48 avoid_crossing_perimeters = 0 -bottom_solid_layers = 5 +bottom_solid_layers = 4 bridge_acceleration = 1000 +bridge_angle = 0 bridge_flow_ratio = 0.8 -bridge_speed = 20 +bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 25 +external_perimeter_speed = 40 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 @@ -27,17 +31,17 @@ first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 2000 +infill_acceleration = 3500 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 +infill_overlap = 35% +infill_speed = 200 interface_shells = 0 layer_height = 0.15 -max_print_speed = 100 +max_print_speed = 250 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 @@ -50,8 +54,8 @@ overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 40 -perimeters = 3 +perimeter_speed = 60 +perimeters = 2 post_process = print_settings_id = raft_layers = 0 @@ -65,13 +69,13 @@ solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 40 +solid_infill_speed = 200 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_buildplate_only = 0 -support_material_contact_distance = 0.2 +support_material_contact_distance = 0.15 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 @@ -86,13 +90,13 @@ support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 -support_material_xy_spacing = 120% +support_material_xy_spacing = 60% thin_walls = 0 threads = 4 -top_infill_extrusion_width = 0.45 -top_solid_infill_speed = 30 -top_solid_layers = 7 -travel_speed = 120 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 50 +top_solid_layers = 5 +travel_speed = 250 wipe_tower = 1 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 diff --git a/Slic3r settings MK2MM/print/0.15mm OPTIMAL SOLUBLE FULL.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE FULL.ini similarity index 91% rename from Slic3r settings MK2MM/print/0.15mm OPTIMAL SOLUBLE FULL.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE FULL.ini index 76a53f7..7ac77ec 100644 --- a/Slic3r settings MK2MM/print/0.15mm OPTIMAL SOLUBLE FULL.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE FULL.ini @@ -1,11 +1,14 @@ -# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:53:54 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:38:56 avoid_crossing_perimeters = 0 bottom_solid_layers = 5 bridge_acceleration = 1000 +bridge_angle = 0 bridge_flow_ratio = 0.8 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 diff --git a/Slic3r settings MK2MM/print/0.15mm OPTIMAL SOLUBLE INTERFACE.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE INTERFACE.ini similarity index 90% rename from Slic3r settings MK2MM/print/0.15mm OPTIMAL SOLUBLE INTERFACE.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE INTERFACE.ini index 2cd5f7d..9df22e9 100644 --- a/Slic3r settings MK2MM/print/0.15mm OPTIMAL SOLUBLE INTERFACE.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE INTERFACE.ini @@ -1,11 +1,14 @@ -# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:53:54 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:39:18 avoid_crossing_perimeters = 0 bottom_solid_layers = 5 bridge_acceleration = 1000 +bridge_angle = 0 bridge_flow_ratio = 0.8 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 diff --git a/Slic3r settings MK2/print/0.15mm OPTIMAL.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL.ini similarity index 90% rename from Slic3r settings MK2/print/0.15mm OPTIMAL.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL.ini index 95ab777..f4fce5a 100644 --- a/Slic3r settings MK2/print/0.15mm OPTIMAL.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL.ini @@ -1,14 +1,18 @@ -# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:47:02 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:37:56 avoid_crossing_perimeters = 0 bottom_solid_layers = 5 bridge_acceleration = 1000 +bridge_angle = 0 bridge_flow_ratio = 0.8 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 diff --git a/Slic3r settings MK2/print/0.20mm 100mms Linear Advance.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm 100mms Linear Advance.ini similarity index 91% rename from Slic3r settings MK2/print/0.20mm 100mms Linear Advance.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.20mm 100mms Linear Advance.ini index 56c0d00..02be8a7 100644 --- a/Slic3r settings MK2/print/0.20mm 100mms Linear Advance.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm 100mms Linear Advance.ini @@ -1,103 +1,105 @@ -# generated by Slic3r Prusa Edition 1.38.0.28-prusa3d-CPP_presets-win64 on 2017-11-15 at 14:00:36 -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_angle = 0 -bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 50 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 100 -interface_shells = 0 -layer_height = 0.2 -max_print_speed = 150 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 60 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 30 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 100 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 0 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 60 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 70 -top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:39:43 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 50 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 100 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 150 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 30 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 100 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 0 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 60 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 70 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.20mm NORMAL 0.6 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL 0.6 nozzle.ini similarity index 91% rename from Slic3r settings MK2/print/0.20mm NORMAL 0.6 nozzle.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL 0.6 nozzle.ini index 1e574db..0ec0f8f 100644 --- a/Slic3r settings MK2/print/0.20mm NORMAL 0.6 nozzle.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL 0.6 nozzle.ini @@ -1,102 +1,105 @@ -# generated by Slic3r 1.36.2-prusa3d-win64 on Thu Aug 3 16:05:41 2017 -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.61 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.67 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.65 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.75 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.2 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 -perimeter_speed = 50 -perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 50 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.6 -top_solid_infill_speed = 40 -top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:40:18 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.61 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 50 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 40 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2MM/print/0.20mm NORMAL.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL MK3.ini similarity index 79% rename from Slic3r settings MK2MM/print/0.20mm NORMAL.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL MK3.ini index 7679e8d..cf8aa63 100644 --- a/Slic3r settings MK2MM/print/0.20mm NORMAL.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL MK3.ini @@ -1,18 +1,22 @@ -# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:54:05 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:30:01 avoid_crossing_perimeters = 0 bottom_solid_layers = 4 bridge_acceleration = 1000 -bridge_flow_ratio = 0.95 -bridge_speed = 20 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 30 +external_perimeter_speed = 40 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 @@ -27,17 +31,17 @@ first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 2000 +infill_acceleration = 3500 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 +infill_overlap = 35% +infill_speed = 200 interface_shells = 0 layer_height = 0.2 -max_print_speed = 100 +max_print_speed = 250 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 @@ -50,7 +54,7 @@ overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 -perimeter_speed = 40 +perimeter_speed = 60 perimeters = 2 post_process = print_settings_id = @@ -65,13 +69,13 @@ solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.45 -solid_infill_speed = 40 +solid_infill_speed = 200 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_buildplate_only = 0 -support_material_contact_distance = 0.2 +support_material_contact_distance = 0.15 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 @@ -86,13 +90,13 @@ support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 -support_material_xy_spacing = 120% +support_material_xy_spacing = 60% thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 30 +top_solid_infill_speed = 50 top_solid_layers = 5 -travel_speed = 120 +travel_speed = 250 wipe_tower = 1 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 diff --git a/Slic3r settings MK2MM/print/0.20mm NORMAL SOLUBLE FULL.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE FULL.ini similarity index 91% rename from Slic3r settings MK2MM/print/0.20mm NORMAL SOLUBLE FULL.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE FULL.ini index 07ce590..78bcd5e 100644 --- a/Slic3r settings MK2MM/print/0.20mm NORMAL SOLUBLE FULL.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE FULL.ini @@ -1,102 +1,105 @@ -# generated by Slic3r 1.35.5.16-prusa3d-win64 on Mon Jul 3 09:28:31 2017 -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 30 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.2 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 1 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 40 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 0 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 40 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 1 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0 -support_material_enforce_layers = 0 -support_material_extruder = 4 -support_material_extrusion_width = 0.45 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 4 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.1 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 1 -support_material_threshold = 80 -support_material_with_sheath = 1 -support_material_xy_spacing = 120% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 30 -top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 20 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:57:25 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 40 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 4 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.1 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 1 +support_material_xy_spacing = 120% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 30 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2MM/print/0.20mm NORMAL SOLUBLE INTERFACE.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE INTERFACE.ini similarity index 90% rename from Slic3r settings MK2MM/print/0.20mm NORMAL SOLUBLE INTERFACE.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE INTERFACE.ini index 5f5fb29..1ee7921 100644 --- a/Slic3r settings MK2MM/print/0.20mm NORMAL SOLUBLE INTERFACE.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE INTERFACE.ini @@ -1,102 +1,105 @@ -# generated by Slic3r 1.36.0-prusa3d-win64 on Fri Jul 21 09:00:11 2017 -avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 1000 -bridge_flow_ratio = 0.95 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.45 -external_perimeter_speed = 30 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.45 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.42 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.45 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.2 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 1 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.45 -perimeter_speed = 40 -perimeters = 2 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 0 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.45 -solid_infill_speed = 40 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 1 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.45 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 4 -support_material_interface_layers = 3 -support_material_interface_spacing = 0.1 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 1 -support_material_threshold = 80 -support_material_with_sheath = 0 -support_material_xy_spacing = 120% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.4 -top_solid_infill_speed = 30 -top_solid_layers = 5 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 20 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:40:49 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 4 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.95 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.45 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.45 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.42 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.45 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.2 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.45 +perimeter_speed = 40 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.45 +solid_infill_speed = 40 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.45 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 3 +support_material_interface_spacing = 0.1 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 0 +support_material_xy_spacing = 120% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.4 +top_solid_infill_speed = 30 +top_solid_layers = 5 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.20mm NORMAL.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL.ini similarity index 90% rename from Slic3r settings MK2/print/0.20mm NORMAL.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL.ini index f4d4c5a..96c9ed7 100644 --- a/Slic3r settings MK2/print/0.20mm NORMAL.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL.ini @@ -1,14 +1,18 @@ -# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:47:19 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:39:58 avoid_crossing_perimeters = 0 bottom_solid_layers = 4 bridge_acceleration = 1000 +bridge_angle = 0 bridge_flow_ratio = 0.95 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 diff --git a/Slic3r settings MK2/print/0.35mm FAST 0.6 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST 0.6 nozzle.ini similarity index 91% rename from Slic3r settings MK2/print/0.35mm FAST 0.6 nozzle.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST 0.6 nozzle.ini index aa4b3ef..27f43b5 100644 --- a/Slic3r settings MK2/print/0.35mm FAST 0.6 nozzle.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST 0.6 nozzle.ini @@ -1,102 +1,105 @@ -# generated by Slic3r 1.36.2-prusa3d-win64 on Thu Aug 3 16:03:47 2017 -avoid_crossing_perimeters = 0 -bottom_solid_layers = 7 -bridge_acceleration = 1000 -bridge_flow_ratio = 0.8 -bridge_speed = 20 -brim_width = 0 -clip_multipart_objects = 1 -complete_objects = 0 -default_acceleration = 1000 -dont_support_bridges = 1 -elefant_foot_compensation = 0 -ensure_vertical_shell_thickness = 1 -external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.61 -external_perimeter_speed = 40 -external_perimeters_first = 0 -extra_perimeters = 0 -extruder_clearance_height = 20 -extruder_clearance_radius = 20 -extrusion_width = 0.67 -fill_angle = 45 -fill_density = 20% -fill_pattern = cubic -first_layer_acceleration = 1000 -first_layer_extrusion_width = 0.65 -first_layer_height = 0.2 -first_layer_speed = 30 -gap_fill_speed = 40 -gcode_comments = 0 -infill_acceleration = 2000 -infill_every_layers = 1 -infill_extruder = 1 -infill_extrusion_width = 0.75 -infill_first = 0 -infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 -interface_shells = 0 -layer_height = 0.35 -max_print_speed = 100 -max_volumetric_extrusion_rate_slope_negative = 0 -max_volumetric_extrusion_rate_slope_positive = 0 -max_volumetric_speed = 0 -min_skirt_length = 4 -notes = -only_retract_when_crossing_perimeters = 0 -ooze_prevention = 0 -output_filename_format = [input_filename_base].gcode -overhangs = 0 -perimeter_acceleration = 800 -perimeter_extruder = 1 -perimeter_extrusion_width = 0.65 -perimeter_speed = 50 -perimeters = 3 -post_process = -print_settings_id = -raft_layers = 0 -resolution = 0 -seam_position = nearest -skirt_distance = 2 -skirt_height = 3 -skirts = 1 -small_perimeter_speed = 20 -solid_infill_below_area = 0 -solid_infill_every_layers = 0 -solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.65 -solid_infill_speed = 60 -spiral_vase = 0 -standby_temperature_delta = -5 -support_material = 0 -support_material_angle = 0 -support_material_buildplate_only = 0 -support_material_contact_distance = 0.15 -support_material_enforce_layers = 0 -support_material_extruder = 0 -support_material_extrusion_width = 0.35 -support_material_interface_contact_loops = 0 -support_material_interface_extruder = 1 -support_material_interface_layers = 2 -support_material_interface_spacing = 0.2 -support_material_interface_speed = 100% -support_material_pattern = rectilinear -support_material_spacing = 2 -support_material_speed = 50 -support_material_synchronize_layers = 0 -support_material_threshold = 45 -support_material_with_sheath = 0 -support_material_xy_spacing = 60% -thin_walls = 0 -threads = 4 -top_infill_extrusion_width = 0.6 -top_solid_infill_speed = 50 -top_solid_layers = 9 -travel_speed = 120 -wipe_tower = 1 -wipe_tower_per_color_wipe = 15 -wipe_tower_width = 60 -wipe_tower_x = 180 -wipe_tower_y = 140 -xy_size_compensation = 0 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:27 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 7 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.61 +external_perimeter_speed = 40 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.35 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 0 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 50 +perimeters = 3 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 1 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 0 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.35 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 1 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 0 +support_material_threshold = 45 +support_material_with_sheath = 0 +support_material_xy_spacing = 60% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.6 +top_solid_infill_speed = 50 +top_solid_layers = 9 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 15 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2MM/print/0.35mm FAST.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST MK3.ini similarity index 77% rename from Slic3r settings MK2MM/print/0.35mm FAST.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST MK3.ini index 8b41bbe..4386d42 100644 --- a/Slic3r settings MK2MM/print/0.35mm FAST.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST MK3.ini @@ -1,18 +1,22 @@ -# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:54:10 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:30:18 avoid_crossing_perimeters = 0 -bottom_solid_layers = 3 +bottom_solid_layers = 4 bridge_acceleration = 1000 -bridge_flow_ratio = 0.95 -bridge_speed = 20 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 30 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/ complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.6 -external_perimeter_speed = 30 +external_perimeter_speed = 40 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 @@ -27,17 +31,17 @@ first_layer_height = 0.2 first_layer_speed = 30 gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 2000 +infill_acceleration = 3500 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.7 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 25% -infill_speed = 60 +infill_overlap = 35% +infill_speed = 200 interface_shells = 0 layer_height = 0.35 -max_print_speed = 100 +max_print_speed = 250 max_volumetric_extrusion_rate_slope_negative = 0 max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 @@ -49,8 +53,8 @@ output_filename_format = [input_filename_base].gcode overhangs = 0 perimeter_acceleration = 800 perimeter_extruder = 1 -perimeter_extrusion_width = 0.43 -perimeter_speed = 40 +perimeter_extrusion_width = 0.45 +perimeter_speed = 60 perimeters = 2 post_process = print_settings_id = @@ -65,13 +69,13 @@ solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0.7 -solid_infill_speed = 60 +solid_infill_speed = 200 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 support_material_buildplate_only = 0 -support_material_contact_distance = 0.2 +support_material_contact_distance = 0.15 support_material_enforce_layers = 0 support_material_extruder = 0 support_material_extrusion_width = 0.35 @@ -86,13 +90,13 @@ support_material_speed = 50 support_material_synchronize_layers = 0 support_material_threshold = 45 support_material_with_sheath = 0 -support_material_xy_spacing = 120% +support_material_xy_spacing = 60% thin_walls = 0 threads = 4 -top_infill_extrusion_width = 0.43 +top_infill_extrusion_width = 0.45 top_solid_infill_speed = 50 top_solid_layers = 4 -travel_speed = 120 +travel_speed = 250 wipe_tower = 1 wipe_tower_per_color_wipe = 15 wipe_tower_width = 60 diff --git a/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol full 0.6 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol full 0.6 nozzle.ini new file mode 100644 index 0000000..4a55af9 --- /dev/null +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol full 0.6 nozzle.ini @@ -0,0 +1,105 @@ +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:51 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.35 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 40 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 4 +support_material_extrusion_width = 0.55 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 3 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 0 +support_material_xy_spacing = 120% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.57 +top_solid_infill_speed = 50 +top_solid_layers = 4 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol int 0.6 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol int 0.6 nozzle.ini new file mode 100644 index 0000000..4774aae --- /dev/null +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol int 0.6 nozzle.ini @@ -0,0 +1,105 @@ +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:58 +avoid_crossing_perimeters = 0 +bottom_solid_layers = 3 +bridge_acceleration = 1000 +bridge_angle = 0 +bridge_flow_ratio = 0.8 +bridge_speed = 20 +brim_width = 0 +clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1 +complete_objects = 0 +default_acceleration = 1000 +dont_support_bridges = 1 +elefant_foot_compensation = 0 +ensure_vertical_shell_thickness = 1 +external_fill_pattern = rectilinear +external_perimeter_extrusion_width = 0.6 +external_perimeter_speed = 30 +external_perimeters_first = 0 +extra_perimeters = 0 +extruder_clearance_height = 20 +extruder_clearance_radius = 20 +extrusion_width = 0.67 +fill_angle = 45 +fill_density = 20% +fill_pattern = cubic +first_layer_acceleration = 1000 +first_layer_extrusion_width = 0.65 +first_layer_height = 0.2 +first_layer_speed = 30 +gap_fill_speed = 40 +gcode_comments = 0 +infill_acceleration = 2000 +infill_every_layers = 1 +infill_extruder = 1 +infill_extrusion_width = 0.75 +infill_first = 0 +infill_only_where_needed = 0 +infill_overlap = 25% +infill_speed = 60 +interface_shells = 0 +layer_height = 0.35 +max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 +max_volumetric_speed = 0 +min_skirt_length = 4 +notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder +only_retract_when_crossing_perimeters = 0 +ooze_prevention = 0 +output_filename_format = [input_filename_base].gcode +overhangs = 1 +perimeter_acceleration = 800 +perimeter_extruder = 1 +perimeter_extrusion_width = 0.65 +perimeter_speed = 40 +perimeters = 2 +post_process = +print_settings_id = +raft_layers = 0 +resolution = 0 +seam_position = nearest +skirt_distance = 2 +skirt_height = 3 +skirts = 0 +small_perimeter_speed = 20 +solid_infill_below_area = 0 +solid_infill_every_layers = 0 +solid_infill_extruder = 1 +solid_infill_extrusion_width = 0.65 +solid_infill_speed = 60 +spiral_vase = 0 +standby_temperature_delta = -5 +support_material = 1 +support_material_angle = 0 +support_material_buildplate_only = 0 +support_material_contact_distance = 0 +support_material_enforce_layers = 0 +support_material_extruder = 0 +support_material_extrusion_width = 0.55 +support_material_interface_contact_loops = 0 +support_material_interface_extruder = 4 +support_material_interface_layers = 2 +support_material_interface_spacing = 0.2 +support_material_interface_speed = 100% +support_material_pattern = rectilinear +support_material_spacing = 2 +support_material_speed = 50 +support_material_synchronize_layers = 1 +support_material_threshold = 80 +support_material_with_sheath = 0 +support_material_xy_spacing = 150% +thin_walls = 0 +threads = 4 +top_infill_extrusion_width = 0.57 +top_solid_infill_speed = 50 +top_solid_layers = 4 +travel_speed = 120 +wipe_tower = 1 +wipe_tower_per_color_wipe = 20 +wipe_tower_width = 60 +wipe_tower_x = 180 +wipe_tower_y = 140 +xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.35mm FAST.ini b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST.ini similarity index 90% rename from Slic3r settings MK2/print/0.35mm FAST.ini rename to Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST.ini index 27df014..674c245 100644 --- a/Slic3r settings MK2/print/0.35mm FAST.ini +++ b/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST.ini @@ -1,14 +1,18 @@ -# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:47:30 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:11 avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 1000 +bridge_angle = 0 bridge_flow_ratio = 0.95 bridge_speed = 20 brim_width = 0 clip_multipart_objects = 1 +compatible_printers = +compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +elefant_foot_compensation = 0 ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.6 diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 0.25 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.25 nozzle.ini similarity index 78% rename from Slic3r settings MK2/printer/Original Prusa i3 MK2 0.25 nozzle.ini rename to Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.25 nozzle.ini index 31e9626..0b78935 100644 --- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 0.25 nozzle.ini +++ b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.25 nozzle.ini @@ -1,6 +1,7 @@ -# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:46:48 bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = deretract_speed = 0 end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors extruder_colour = #FFFF00 @@ -12,15 +13,15 @@ min_layer_height = 0.05 nozzle_diameter = 0.25 octoprint_apikey = octoprint_host = -printer_notes = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n printer_settings_id = retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 1 retract_length_toolchange = 3 -retract_lift = 0.5 -retract_lift_above = 1 +retract_lift = 0.6 +retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 0.6 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.6 nozzle.ini similarity index 78% rename from Slic3r settings MK2/printer/Original Prusa i3 MK2 0.6 nozzle.ini rename to Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.6 nozzle.ini index f1b26e3..022510c 100644 --- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 0.6 nozzle.ini +++ b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.6 nozzle.ini @@ -1,38 +1,39 @@ -# generated by Slic3r 1.36.2-prusa3d-win64 on Thu Aug 3 16:00:43 2017 -bed_shape = 0x0,250x0,250x210,0x210 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -deretract_speed = 0 -end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors -extruder_colour = #FFFF00 -extruder_offset = 0x0 -gcode_flavor = reprap -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] -max_layer_height = 0.35 -min_layer_height = 0.1 -nozzle_diameter = 0.6 -octoprint_apikey = -octoprint_host = -printer_notes = -printer_settings_id = -retract_before_travel = 1 -retract_before_wipe = 0% -retract_layer_change = 1 -retract_length = 0.8 -retract_length_toolchange = 3 -retract_lift = 0.5 -retract_lift_above = 1 -retract_lift_below = 199 -retract_restart_extra = 0 -retract_restart_extra_toolchange = 0 -retract_speed = 35 -serial_port = -serial_speed = 250000 -single_extruder_multi_material = 0 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 -toolchange_gcode = -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 1 -wipe = 1 -z_offset = 0 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:46:53 +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 0 +end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors +extruder_colour = #FFFF00 +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.35 +min_layer_height = 0.1 +nozzle_diameter = 0.6 +octoprint_apikey = +octoprint_host = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n +printer_settings_id = +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 3 +retract_lift = 0.6 +retract_lift_above = 0 +retract_lift_below = 199 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 0 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini similarity index 79% rename from Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini rename to Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini index 6b9e849..353e4bf 100644 --- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini +++ b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini @@ -1,7 +1,8 @@ -# generated by Slic3r 1.35.5-prusa3d-win64 on Thu Jul 6 12:55:27 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-20 at 11:34:25 bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -deretract_speed = 0 +between_objects_gcode = +deretract_speed = 50 end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n extruder_colour = #FFAA55 extruder_offset = 0x0 @@ -12,14 +13,14 @@ min_layer_height = 0.07 nozzle_diameter = 0.6 octoprint_apikey = octoprint_host = -printer_notes = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN printer_settings_id = retract_before_travel = 3 -retract_before_wipe = 0% +retract_before_wipe = 60% retract_layer_change = 0 retract_length = 4 retract_length_toolchange = 6 -retract_lift = 0.5 +retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 @@ -33,6 +34,6 @@ toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 -variable_layer_height = 0 +variable_layer_height = 1 wipe = 1 z_offset = 0 diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode.ini b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode.ini similarity index 79% rename from Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode.ini rename to Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode.ini index 4cdac39..589ca9b 100644 --- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode.ini +++ b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode.ini @@ -1,7 +1,8 @@ -# generated by Slic3r 1.35.5-prusa3d-win64 on Thu Jul 6 12:55:27 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-20 at 11:34:34 bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -deretract_speed = 0 +between_objects_gcode = +deretract_speed = 50 end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n extruder_colour = #FFAA55 extruder_offset = 0x0 @@ -12,14 +13,14 @@ min_layer_height = 0.07 nozzle_diameter = 0.4 octoprint_apikey = octoprint_host = -printer_notes = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN printer_settings_id = retract_before_travel = 3 -retract_before_wipe = 0% +retract_before_wipe = 60% retract_layer_change = 0 retract_length = 4 retract_length_toolchange = 6 -retract_lift = 0.5 +retract_lift = 0.6 retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 @@ -33,6 +34,6 @@ toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 -variable_layer_height = 0 +variable_layer_height = 1 wipe = 1 z_offset = 0 diff --git a/Slic3r settings MK2MM/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini similarity index 51% rename from Slic3r settings MK2MM/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini rename to Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini index a9677e3..a195633 100644 --- a/Slic3r settings MK2MM/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini +++ b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini @@ -1,38 +1,39 @@ -# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 13:22:12 2017 -bed_shape = 0x0,250x0,250x210,0x210 -before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -deretract_speed = 0,0,0,0 -end_gcode = M107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n -extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 -extruder_offset = 0x0,0x0,0x0,0x0 -gcode_flavor = reprap -layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] -max_layer_height = 0.25,0.25,0.25,0.25 -min_layer_height = 0.07,0.07,0.07,0.07 -nozzle_diameter = 0.6,0.6,0.6,0.6 -octoprint_apikey = -octoprint_host = -printer_notes = -printer_settings_id = -retract_before_travel = 3,3,3,3 -retract_before_wipe = 60%,60%,60%,60% -retract_layer_change = 0,0,0,0 -retract_length = 4,4,4,4 -retract_length_toolchange = 4,4,4,4 -retract_lift = 0.5,0.5,0.5,0.5 -retract_lift_above = 0,0,0,0 -retract_lift_below = 199,199,199,199 -retract_restart_extra = 0,0,0,0 -retract_restart_extra_toolchange = 0,0,0,0 -retract_speed = 50,50,50,50 -serial_port = -serial_speed = 250000 -single_extruder_multi_material = 1 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG92 E0.0\nM900 K100 -toolchange_gcode = -use_firmware_retraction = 0 -use_relative_e_distances = 1 -use_volumetric_e = 0 -variable_layer_height = 0 -wipe = 1,1,1,1 -z_offset = 0 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:47:43 +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 50,50,50,50 +end_gcode = {if not has_wipe_tower}\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n +extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 +extruder_offset = 0x0,0x0,0x0,0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25,0.25,0.25,0.25 +min_layer_height = 0.07,0.07,0.07,0.07 +nozzle_diameter = 0.6,0.6,0.6,0.6 +octoprint_apikey = +octoprint_host = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN +printer_settings_id = +retract_before_travel = 3,3,3,3 +retract_before_wipe = 60%,60%,60%,60% +retract_layer_change = 0,0,0,0 +retract_length = 4,4,4,4 +retract_length_toolchange = 4,4,4,4 +retract_lift = 0.6,0.6,0.6,0.6 +retract_lift_above = 0,0,0,0 +retract_lift_below = 199,199,199,199 +retract_restart_extra = 0,0,0,0 +retract_restart_extra_toolchange = 0,0,0,0 +retract_speed = 80,80,80,80 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 1 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 0 +wipe = 1,1,1,1 +z_offset = 0 diff --git a/Slic3r settings MK2MM/printer/Original Prusa i3 MK2 MultiMaterial.ini b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial.ini similarity index 50% rename from Slic3r settings MK2MM/printer/Original Prusa i3 MK2 MultiMaterial.ini rename to Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial.ini index 22e119c..a4f7125 100644 --- a/Slic3r settings MK2MM/printer/Original Prusa i3 MK2 MultiMaterial.ini +++ b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial.ini @@ -1,8 +1,9 @@ -# generated by Slic3r 1.35.0.22-prusa3d-win64 on Thu Jun 1 11:02:50 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:47:34 bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n -deretract_speed = 0,0,0,0 -end_gcode = M107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n +between_objects_gcode = +deretract_speed = 50,50,50,50 +end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259 extruder_offset = 0x0,0x0,0x0,0x0 gcode_flavor = reprap @@ -12,24 +13,23 @@ min_layer_height = 0.07,0.07,0.07,0.07 nozzle_diameter = 0.4,0.4,0.4,0.4 octoprint_apikey = octoprint_host = -printer_notes = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN printer_settings_id = retract_before_travel = 3,3,3,3 retract_before_wipe = 60%,60%,60%,60% retract_layer_change = 0,0,0,0 retract_length = 4,4,4,4 retract_length_toolchange = 4,4,4,4 -retract_lift = 0.5,0.5,0.5,0.5 +retract_lift = 0.6,0.6,0.6,0.6 retract_lift_above = 0,0,0,0 retract_lift_below = 199,199,199,199 retract_restart_extra = 0,0,0,0 retract_restart_extra_toolchange = 0,0,0,0 -retract_speed = 50,50,50,50 +retract_speed = 80,80,80,80 serial_port = serial_speed = 250000 -set_and_wait_temperatures = 0 single_extruder_multi_material = 1 -start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG92 E0.0\nM900 K200 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0 toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2.ini b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2.ini similarity index 78% rename from Slic3r settings MK2/printer/Original Prusa i3 MK2.ini rename to Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2.ini index 98feb19..b8b2aee 100644 --- a/Slic3r settings MK2/printer/Original Prusa i3 MK2.ini +++ b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2.ini @@ -1,6 +1,7 @@ -# generated by Slic3r 1.35.0.23-prusa3d-win64 on Tue Jun 6 11:50:10 2017 +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:32:13 bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = deretract_speed = 0 end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors extruder_colour = #FFFF00 @@ -12,22 +13,21 @@ min_layer_height = 0.07 nozzle_diameter = 0.4 octoprint_apikey = octoprint_host = -printer_notes = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n printer_settings_id = retract_before_travel = 1 retract_before_wipe = 0% retract_layer_change = 1 retract_length = 0.8 retract_length_toolchange = 3 -retract_lift = 0.5 -retract_lift_above = 1 +retract_lift = 0.6 +retract_lift_above = 0 retract_lift_below = 199 retract_restart_extra = 0 retract_restart_extra_toolchange = 0 retract_speed = 35 serial_port = serial_speed = 250000 -set_and_wait_temperatures = 0 single_extruder_multi_material = 0 start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 toolchange_gcode = diff --git a/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK3.ini b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK3.ini new file mode 100644 index 0000000..f04ffdc --- /dev/null +++ b/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK3.ini @@ -0,0 +1,38 @@ +# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:26:13 +bed_shape = 0x0,250x0,250x210,0x210 +before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n +between_objects_gcode = +deretract_speed = 0 +end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors +extruder_colour = #FFFF00 +extruder_offset = 0x0 +gcode_flavor = reprap +layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z] +max_layer_height = 0.25 +min_layer_height = 0.07 +nozzle_diameter = 0.4 +octoprint_apikey = +octoprint_host = +printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n +retract_before_travel = 1 +retract_before_wipe = 0% +retract_layer_change = 1 +retract_length = 0.8 +retract_length_toolchange = 3 +retract_lift = 0.6 +retract_lift_above = 0 +retract_lift_below = 209 +retract_restart_extra = 0 +retract_restart_extra_toolchange = 0 +retract_speed = 35 +serial_port = +serial_speed = 250000 +single_extruder_multi_material = 0 +start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0 +toolchange_gcode = +use_firmware_retraction = 0 +use_relative_e_distances = 1 +use_volumetric_e = 0 +variable_layer_height = 1 +wipe = 1 +z_offset = 0 diff --git a/Slic3r settings MK2S MK2MM and MK3/slic3r.ini b/Slic3r settings MK2S MK2MM and MK3/slic3r.ini new file mode 100644 index 0000000..edfac26 --- /dev/null +++ b/Slic3r settings MK2S MK2MM and MK3/slic3r.ini @@ -0,0 +1,24 @@ +# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 08:53:50 +autocenter = 0 +background_processing = 0 +last_output_path = C:\Users\Jindřich Beneš\Desktop +main_frame_maximized = 1 +main_frame_pos = -8,-8 +main_frame_size = 1936,1066 +mode = expert +no_controller = 1 +no_defaults = 1 +object_settings_pos = 68,45 +object_settings_size = 1309,822 +show_incompatible_presets = 1 +version = 1.38.0.35-prusa3d-win64 +version_check = 1 + +[presets] +filament = Prusa PLA 1.75mm +print = 0.15mm 100mms Linear Advance +printer = Original Prusa i3 MK2 + +[recent] +config_directory = C:\Users\Jindřich Beneš\Desktop +skein_directory = C:\Users\Jindřich Beneš\Desktop diff --git a/Slic3r settings 175/filament/ColorFabb Brass Bronze 1.75mm.ini b/old/Slic3r settings 175/filament/ColorFabb Brass Bronze 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/ColorFabb Brass Bronze 1.75mm.ini rename to old/Slic3r settings 175/filament/ColorFabb Brass Bronze 1.75mm.ini diff --git a/Slic3r settings 175/filament/ColorFabb Wood Bamboo 1.75mm.ini b/old/Slic3r settings 175/filament/ColorFabb Wood Bamboo 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/ColorFabb Wood Bamboo 1.75mm.ini rename to old/Slic3r settings 175/filament/ColorFabb Wood Bamboo 1.75mm.ini diff --git a/Slic3r settings 175/filament/ColorFabb XT 1.75mm.ini b/old/Slic3r settings 175/filament/ColorFabb XT 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/ColorFabb XT 1.75mm.ini rename to old/Slic3r settings 175/filament/ColorFabb XT 1.75mm.ini diff --git a/Slic3r settings 175/filament/ColorFabb XT-CF20 1.75mm.ini b/old/Slic3r settings 175/filament/ColorFabb XT-CF20 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/ColorFabb XT-CF20 1.75mm.ini rename to old/Slic3r settings 175/filament/ColorFabb XT-CF20 1.75mm.ini diff --git a/Slic3r settings 175/filament/Fillamentum ABS 1.75mm.ini b/old/Slic3r settings 175/filament/Fillamentum ABS 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/Fillamentum ABS 1.75mm.ini rename to old/Slic3r settings 175/filament/Fillamentum ABS 1.75mm.ini diff --git a/Slic3r settings 175/filament/Prusa ABS 1.75mm.ini b/old/Slic3r settings 175/filament/Prusa ABS 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/Prusa ABS 1.75mm.ini rename to old/Slic3r settings 175/filament/Prusa ABS 1.75mm.ini diff --git a/Slic3r settings 175/filament/Prusa FLEX 1.75mm.ini b/old/Slic3r settings 175/filament/Prusa FLEX 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/Prusa FLEX 1.75mm.ini rename to old/Slic3r settings 175/filament/Prusa FLEX 1.75mm.ini diff --git a/Slic3r settings 175/filament/Prusa HIPS 1.75mm.ini b/old/Slic3r settings 175/filament/Prusa HIPS 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/Prusa HIPS 1.75mm.ini rename to old/Slic3r settings 175/filament/Prusa HIPS 1.75mm.ini diff --git a/Slic3r settings 175/filament/Prusa PET 1.75mm.ini b/old/Slic3r settings 175/filament/Prusa PET 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/Prusa PET 1.75mm.ini rename to old/Slic3r settings 175/filament/Prusa PET 1.75mm.ini diff --git a/Slic3r settings 175/filament/Prusa PLA 1.75mm.ini b/old/Slic3r settings 175/filament/Prusa PLA 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/Prusa PLA 1.75mm.ini rename to old/Slic3r settings 175/filament/Prusa PLA 1.75mm.ini diff --git a/Slic3r settings 175/filament/Taulman Bridge 1.75mm.ini b/old/Slic3r settings 175/filament/Taulman Bridge 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/Taulman Bridge 1.75mm.ini rename to old/Slic3r settings 175/filament/Taulman Bridge 1.75mm.ini diff --git a/Slic3r settings 175/filament/Taulman T-Glase 1.75mm.ini b/old/Slic3r settings 175/filament/Taulman T-Glase 1.75mm.ini similarity index 100% rename from Slic3r settings 175/filament/Taulman T-Glase 1.75mm.ini rename to old/Slic3r settings 175/filament/Taulman T-Glase 1.75mm.ini diff --git a/Slic3r settings 175/print/0.05mm PLA ULTRADETAIL.ini b/old/Slic3r settings 175/print/0.05mm PLA ULTRADETAIL.ini similarity index 100% rename from Slic3r settings 175/print/0.05mm PLA ULTRADETAIL.ini rename to old/Slic3r settings 175/print/0.05mm PLA ULTRADETAIL.ini diff --git a/Slic3r settings 175/print/0.10mm DETAIL.ini b/old/Slic3r settings 175/print/0.10mm DETAIL.ini similarity index 100% rename from Slic3r settings 175/print/0.10mm DETAIL.ini rename to old/Slic3r settings 175/print/0.10mm DETAIL.ini diff --git a/Slic3r settings 175/print/0.20mm FLEX.ini b/old/Slic3r settings 175/print/0.20mm FLEX.ini similarity index 100% rename from Slic3r settings 175/print/0.20mm FLEX.ini rename to old/Slic3r settings 175/print/0.20mm FLEX.ini diff --git a/Slic3r settings 175/print/0.20mm NORMAL.ini b/old/Slic3r settings 175/print/0.20mm NORMAL.ini similarity index 100% rename from Slic3r settings 175/print/0.20mm NORMAL.ini rename to old/Slic3r settings 175/print/0.20mm NORMAL.ini diff --git a/Slic3r settings 175/print/0.25mm DRAFT.ini b/old/Slic3r settings 175/print/0.25mm DRAFT.ini similarity index 100% rename from Slic3r settings 175/print/0.25mm DRAFT.ini rename to old/Slic3r settings 175/print/0.25mm DRAFT.ini diff --git a/Slic3r settings 175/printer/Prusa i3 1.75 FLEX.ini b/old/Slic3r settings 175/printer/Prusa i3 1.75 FLEX.ini similarity index 100% rename from Slic3r settings 175/printer/Prusa i3 1.75 FLEX.ini rename to old/Slic3r settings 175/printer/Prusa i3 1.75 FLEX.ini diff --git a/Slic3r settings 175/printer/Prusa i3 1.75.ini b/old/Slic3r settings 175/printer/Prusa i3 1.75.ini similarity index 100% rename from Slic3r settings 175/printer/Prusa i3 1.75.ini rename to old/Slic3r settings 175/printer/Prusa i3 1.75.ini diff --git a/Slic3r settings 175/simple.ini b/old/Slic3r settings 175/simple.ini similarity index 100% rename from Slic3r settings 175/simple.ini rename to old/Slic3r settings 175/simple.ini diff --git a/Slic3r settings 175/slic3r.ini b/old/Slic3r settings 175/slic3r.ini similarity index 100% rename from Slic3r settings 175/slic3r.ini rename to old/Slic3r settings 175/slic3r.ini diff --git a/Slic3r settings 3mm/filament/Prusa ABS 2.85mm.ini b/old/Slic3r settings 3mm/filament/Prusa ABS 2.85mm.ini similarity index 100% rename from Slic3r settings 3mm/filament/Prusa ABS 2.85mm.ini rename to old/Slic3r settings 3mm/filament/Prusa ABS 2.85mm.ini diff --git a/Slic3r settings 3mm/filament/Prusa HIPS 2.85mm.ini b/old/Slic3r settings 3mm/filament/Prusa HIPS 2.85mm.ini similarity index 100% rename from Slic3r settings 3mm/filament/Prusa HIPS 2.85mm.ini rename to old/Slic3r settings 3mm/filament/Prusa HIPS 2.85mm.ini diff --git a/Slic3r settings 3mm/filament/Prusa PET 2.85mm.ini b/old/Slic3r settings 3mm/filament/Prusa PET 2.85mm.ini similarity index 100% rename from Slic3r settings 3mm/filament/Prusa PET 2.85mm.ini rename to old/Slic3r settings 3mm/filament/Prusa PET 2.85mm.ini diff --git a/Slic3r settings 3mm/filament/Prusa PLA 2.85mm.ini b/old/Slic3r settings 3mm/filament/Prusa PLA 2.85mm.ini similarity index 100% rename from Slic3r settings 3mm/filament/Prusa PLA 2.85mm.ini rename to old/Slic3r settings 3mm/filament/Prusa PLA 2.85mm.ini diff --git a/Slic3r settings 3mm/filament/Prusa PP Flex 2.85mm.ini b/old/Slic3r settings 3mm/filament/Prusa PP Flex 2.85mm.ini similarity index 100% rename from Slic3r settings 3mm/filament/Prusa PP Flex 2.85mm.ini rename to old/Slic3r settings 3mm/filament/Prusa PP Flex 2.85mm.ini diff --git a/Slic3r settings 3mm/print/0.15mm DETAIL.ini b/old/Slic3r settings 3mm/print/0.15mm DETAIL.ini similarity index 100% rename from Slic3r settings 3mm/print/0.15mm DETAIL.ini rename to old/Slic3r settings 3mm/print/0.15mm DETAIL.ini diff --git a/Slic3r settings 3mm/print/0.20mm NORMAL.ini b/old/Slic3r settings 3mm/print/0.20mm NORMAL.ini similarity index 100% rename from Slic3r settings 3mm/print/0.20mm NORMAL.ini rename to old/Slic3r settings 3mm/print/0.20mm NORMAL.ini diff --git a/Slic3r settings 3mm/print/0.28mm FAST.ini b/old/Slic3r settings 3mm/print/0.28mm FAST.ini similarity index 100% rename from Slic3r settings 3mm/print/0.28mm FAST.ini rename to old/Slic3r settings 3mm/print/0.28mm FAST.ini diff --git a/Slic3r settings 3mm/print/Flex.ini b/old/Slic3r settings 3mm/print/Flex.ini similarity index 100% rename from Slic3r settings 3mm/print/Flex.ini rename to old/Slic3r settings 3mm/print/Flex.ini diff --git a/Slic3r settings 3mm/printer/Prusa i3 Flex.ini b/old/Slic3r settings 3mm/printer/Prusa i3 Flex.ini similarity index 100% rename from Slic3r settings 3mm/printer/Prusa i3 Flex.ini rename to old/Slic3r settings 3mm/printer/Prusa i3 Flex.ini diff --git a/Slic3r settings 3mm/printer/Prusa i3.ini b/old/Slic3r settings 3mm/printer/Prusa i3.ini similarity index 100% rename from Slic3r settings 3mm/printer/Prusa i3.ini rename to old/Slic3r settings 3mm/printer/Prusa i3.ini diff --git a/Slic3r settings 3mm/simple.ini b/old/Slic3r settings 3mm/simple.ini similarity index 100% rename from Slic3r settings 3mm/simple.ini rename to old/Slic3r settings 3mm/simple.ini diff --git a/Slic3r settings 3mm/slic3r.ini b/old/Slic3r settings 3mm/slic3r.ini similarity index 100% rename from Slic3r settings 3mm/slic3r.ini rename to old/Slic3r settings 3mm/slic3r.ini