From 10ac66c333ca90ff9690aa7942b0235fc7389ffc Mon Sep 17 00:00:00 2001
From: Caroline <caroline@hartsmartproducts.com>
Date: Fri, 19 Apr 2024 09:07:14 -0500
Subject: [PATCH] Remove first layer bed temps from support material

Custom gcode and substitutions don't always work correctly, so this works for support-only materials at least.
---
 live/HartSmartProducts/0.1.0.ini | 7 ++-----
 1 file changed, 2 insertions(+), 5 deletions(-)

diff --git a/live/HartSmartProducts/0.1.0.ini b/live/HartSmartProducts/0.1.0.ini
index 6f70cfb..e9d0da8 100644
--- a/live/HartSmartProducts/0.1.0.ini
+++ b/live/HartSmartProducts/0.1.0.ini
@@ -878,7 +878,7 @@ filament_type = BVOH
 temperature = 220
 bed_temperature = 60
 first_layer_temperature = 215
-first_layer_bed_temperature = 60
+first_layer_bed_temperature = 0
 idle_temperature = 120
 filament_max_volumetric_speed = 15
 extrusion_multiplier = 0.90
@@ -901,7 +901,7 @@ filament_type = PVA
 temperature = 220
 bed_temperature = 60
 first_layer_temperature = 215
-first_layer_bed_temperature = 60
+first_layer_bed_temperature = 0
 idle_temperature = 120
 filament_max_volumetric_speed = 15
 extrusion_multiplier = 0.90
@@ -1065,7 +1065,6 @@ inherits = *PVA*; *Polymaker*
 temperature = 220
 bed_temperature = 40
 first_layer_temperature = 215
-first_layer_bed_temperature = 40
 filament_cost = 79.99
 filament_density = 1.13
 filament_max_volumetric_speed = 20
@@ -1116,7 +1115,6 @@ inherits = *PVA*; *Essentium*
 temperature = 215
 bed_temperature = 60
 first_layer_temperature = 210
-first_layer_bed_temperature = 60
 filament_cost = 100.00
 filament_density = 1.14
 filament_max_volumetric_speed = 20
@@ -1145,7 +1143,6 @@ inherits = *BVOH*; *BASF*
 temperature = 215
 bed_temperature = 60
 first_layer_temperature = 210
-first_layer_bed_temperature = 60
 filament_cost = 143.00
 filament_density = 1.14
 filament_max_volumetric_speed = 20