Move max_layer_height = 0.3 min_layer_height = 0.06

live/Ultimaker/1.1.0.ini

@@ -100,8 +100,6 @@ ironing_spacing = 0.1
 ironing_speed = 15
 ironing_type = top
 layer_height = 0.2
-max_layer_height = 0.3
-min_layer_height = 0.06
 max_print_speed = 100
 max_volumetric_speed = 0
 min_skirt_length = 2
@@ -380,6 +378,8 @@ default_print_profile = 0.20mm NORMAL @ULTIMAKER
 default_filament_profile = Generic PLA @ULTIMAKER
 start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n\n; # # # # # # START Header\nG21 		; metric values\nG90 		; absolute positioning\nM82 		; set extruder to absolute mode\nM107 		; start with the fan off\n\nM140 S[first_layer_bed_temperature]	; start bed heating\n\nG28 X0 Y0 Z0	; move X/Y/Z to endstops\nG1 X1 Y6 F15000	; move X/Y to start position\nG1 Z35 F9000	; move Z to start position\n\n; Wait for bed and nozzle temperatures\nM190 S{first_layer_bed_temperature[0] - 5}	; wait for bed temperature - 5\nM140 S[first_layer_bed_temperature]	; continue bed heating\nM109 S[first_layer_temperature]	; wait for nozzle temperature\n\n; Purge and prime\nM83 		; set extruder to relative mode\nG92 E0           ; reset extrusion distance\nG0 X0 Y1 F10000\nG1 F150 E20 ; compress the bowden tube\nG1 E-8 F1200\nG0 X30 Y1 F5000    \nG0 F1200 Z{first_layer_height/2} ; Cut the connection to priming blob\nG0 X100 F10000 ; disconnect with the prime blob\nG0 X50         ; Avoid the metal clip holding the Ultimaker glass plate\nG0 Z0.2 F720\nG1 E8 F1200\nG1 X80 E3 F1000  ; intro line 1\nG1 X110 E4 F1000 ; intro line 2\nG1 X140 F600        ; drag filament to decompress bowden tube\nG1 X100 F3200       ; wipe backwards a bit\nG1 X150 F3200       ; back to where there is no plastic: avoid dragging\nG92 E0           ; reset extruder reference\nM82 		; set extruder to absolute mode\n\n; # # # # # # END Header
 end_gcode = ; # # # # # # START Footer\nG91 			; relative coordinates\n;G1 E-1 F1200		; retract the filament\nG1 Z+15  X-10 Y-10 E-7  F6000		; move Z a bit\n; G1 X-10 Y-10 F6000	; move XY a bit\nG1 E-5.5 F300		; retract the filament\nG28 X0 Y0		; move X/Y to min endstops, so the head is out of the way\nM104 S0			; extruder heater off\nM140 S0			; heated bed heater off (if you have it)\nM84 			; disable motors\n; # # # # # # END Footer\n
+max_layer_height = 0.3
+min_layer_height = 0.06
 
 [printer:Ultimaker 2 DXUv2]
 inherits = Ultimaker 2
@@ -395,6 +395,8 @@ default_filament_profile = Generic PLA @ULTIMAKER
 toolchange_gcode = {if previous_extruder>= 0}\nM104 S{temperature[previous_extruder] + standby_temperature_delta}\n{endif}\n\nM104 T{next_extruder} S{temperature[next_extruder]}\n\nT{next_extruder}\nM109 S{temperature[next_extruder]}
 start_gcode = ; Printer_Settings_ID: [printer_settings_id]\n; DXUv2 improved PS start priming Gcode for dual nozzles for multi-material print\nM355 S1 P25 ; Turn on case light dim\nM190 S[first_layer_bed_temperature]\nG28 ; Home all\n;M420 S1 ; Enable and load bed mesh\nG29 ; Run automatic bed leveling. Comment this line out if auto bed leveling is not desired.\nM104 T0 S{temperature[0] + standby_temperature_delta} ; Preheat T0 to standby temp\nM104 T1 S{temperature[1] + standby_temperature_delta} ; Preheat T1 to standby temp\nG21 ; Metric values\nG90 ; Absolute positioning\nM82 ; Set extruder to absolute mode\nM107 ; Start with the fan off\nM200 D0 T0 ; Reset filament diameter\nM200 D0 T1 ; Reset filament diameter\nG0 X200 F7200 ; Move to safe X and Y location from right side after ending ABL homing. Move X before Y to avoid hitting switching lever.\nG1 Y150 F7200\n; Prime routine for T1 in normally \nT1 ; move to the nozzle 2\nM104 T1 S{temperature[1]} ; Start heating up T1\nG0 Z10 F2400 ; move the platform down to 10mm\nM109 T1 S{temperature[1]} ; Heat up and wait for T1\nG0 Y150 F7200 ; Move printhead to safe Y location to move right.\nG0 X50 Y1 F7200 ; Add HOTEND_OFFSET_Y index 1 to Y0 (or forward-most safe Y location when T1 is active) to get Gcode Y parameter\nG0 X95 Z0.3 F2400 ; lower nozzle\nG92 E0 ; reset E location\nG1 X225 Y1 Z0.3 E{retract_length_toolchange[1]} F1500 ; Add HOTEND_OFFSET_X index 1 to X217 (or right-most safe X location when T1 is active) to get actual Gcode X parameter.\nG3 X235 Y11 I0 J10 F7200\nG0 X235 Y11 Z0.3 F7200\nM104 T1 S{temperature[1] + standby_temperature_delta} ; Start cooling down nozzle to reduce oozing\nG92 E0\nG1 Y70 E3 F1000 ; intro line\nM104 T1 S{temperature[1] + standby_temperature_delta}\nG92 E0 \nG1 E-{retract_length_toolchange[1]} F1200 ; retract\nG0 Y105 F18000 ; break line\nG0 Y150 Z10 F2400 ; raise nozzle\n; Prime routine for T0\nT0 ; move to the nozzle 1\nM104 T0 S{temperature[0]} ; Start heating up T0\nG0 Z10 F2400\nM109 T0 S{temperature[0]}\nG0 Y150 F7200 ; Move printhead to safe Y location to move right.\nG0 X32 Y3 F7200\nG0 X77 Z0.3 F2400\nG92 E0 ; reset E location\nG1 X207 Y3 Z0.3 E{retract_length_toolchange[0]} F1500\nG3 X217 Y13 I0 J10 F7200\nG0 X217 Y13 Z0.3 F7200\nM104 T0 S{temperature[0] + standby_temperature_delta} ; Start cooling down nozzle to reduce oozing\nG92 E0 ; reset E location\nG1 Y72 E3 F1000 ; intro line\nM104 T0 S{temperature[0] + standby_temperature_delta}\nM104 T{initial_extruder} S{temperature[initial_extruder]} ; Start heating initial nozzle. Do not wait.\nG92 E0\nG1 E-{retract_length_toolchange[0]} F1200 ; retract\nG0 Y105 F18000 ; break line\nG0 Y150 Z10 F2400 ; raise nozzle\n; Final prime and wipe sequence for initial extruder (usually T0)\nT{initial_extruder} ; move to the initial nozzle used for print\nM400 ;finish all moves\nG0 Z20 F2400\nG0 X212 F7200\nG0 Y70 F7200\nM109 T{initial_extruder} S{temperature[initial_extruder]} ; Wait for initial nozzle to reach temp\nG92 E0\nG1 E{retract_length_toolchange[initial_extruder]} F1200 ; prime by switching length\nG0 X217 Y50 Z0.5 F7200\nG92 E0\nG0 Y9.4 Z0.5 E3 F7200\nG2 X212 Y3.4 Z0.4 I-6 J0 F7200\nM104 T{initial_extruder} S{first_layer_temperature[initial_extruder]} ; Start heating to first layer temp\nG0 X207 Y3.4 Z0.4 F7200\nG2 X205 Y5.4 Z0.3 I0 J2 F7200\nG0 X205 Y5.4 Z0.3 F7200\nG1 Y10 F18000 ; break line\nG92 E0\nG1 Y50 E2 F1000 ; extrude line\nG92 E0\nG1 E-0.5 F1500 ; retract slightly\nG1 Y100 F18000 ; break line\nG92 E0\nM355 S1 P255; Turn on case light brighter\n;end of startup sequence
 end_gcode = ;End G-code\nG91 ;Relative movement\nG0 X-8.0 Y-8.0 Z3.5 E-4.5 F18000 ;Wiping+material retraction ;increase bed lower 0.5>5.0 and add Y movement\nG0 F10000 Z1.5 E4.5 ;Compensation for the retraction\nG90 ;Disable relative movement\nM400 ;wait for all moves in planner to complete\nG90 ;absolute positioning\nM104 S0 T0 ;extruder heater off\nM104 S0 T1\nM140 S0 ;turn off bed\nT0 ; move to the first head\nG27; park toolhead\nM107 ;fan off\nM355 S0;turn off case light
+max_layer_height = 0.3
+min_layer_height = 0.06
 
 [printer:*sline*]
 printer_model = ULTIMAKERSline
@@ -403,6 +405,8 @@ printer_notes = Dont remove the following keywords! These keywords are used in t
 toolchange_gcode = {if previous_extruder>= 0}\nM104 S{temperature[previous_extruder] + standby_temperature_delta}\n{endif}\n\nM104 T{next_extruder} S{temperature[next_extruder]}\n\nG91\nG0 Z2\nG90\nM82\n\nT{next_extruder}\nM109 S{temperature[next_extruder]}\n\nG91\nG0 Z-2\nG90\nM82\nG92 E0 ; reset extrusion distance
 start_gcode = ; Delete the first 'generated by PrusaSlicer' line to make gcode printable on Ultimaker S-line\n\n;START_OF_HEADER\n; Printer_Settings_ID: [printer_settings_id]\n\n;ULTIMAKER GRIFFIN HEADER\n;HEADER_VERSION:0.1\n;FLAVOR:Griffin\n;GENERATOR.NAME:PrusaSlicer\n;GENERATOR.VERSION:5.4.0\n;GENERATOR.BUILD_DATE:{year}-{month}-{day}\n;TARGET_MACHINE.NAME:Ultimaker S7\n;EXTRUDER_TRAIN.0.INITIAL_TEMPERATURE:{first_layer_temperature[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.VOLUME_USED:{extruded_volume[0]}\n;EXTRUDER_TRAIN.0.MATERIAL.GUID:0f12978a-8e3c-4147-b9ca-726d5ed59368\n;EXTRUDER_TRAIN.0.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.0.NOZZLE.NAME:AA {nozzle_diameter[0]}\n;EXTRUDER_TRAIN.1.INITIAL_TEMPERATURE:{temperature[1] + standby_temperature_delta}\n;EXTRUDER_TRAIN.1.MATERIAL.VOLUME_USED:{extruded_volume[1]}\n;EXTRUDER_TRAIN.1.MATERIAL.GUID:0f12978a-8e3c-4147-b9ca-726d5ed59368\n;EXTRUDER_TRAIN.1.NOZZLE.DIAMETER:{nozzle_diameter[0]}\n;EXTRUDER_TRAIN.1.NOZZLE.NAME:AA {nozzle_diameter[0]}\n;BUILD_PLATE.INITIAL_TEMPERATURE:[first_layer_bed_temperature]\n;BUILD_VOLUME.TEMPERATURE:28\n;PRINT.TIME:0\n;PRINT.GROUPS:1\n;PRINT.SIZE.MIN.X:{print_bed_min[0]}\n;PRINT.SIZE.MIN.Y:{print_bed_min[1]}\n;PRINT.SIZE.MIN.Z:0\n;PRINT.SIZE.MAX.X:{print_bed_max[0]}\n;PRINT.SIZE.MAX.Y:{print_bed_max[1]}\n;PRINT.SIZE.MAX.Z:{max_print_height}\n;SLICE_UUID:32daaf1d-f868-4a8e-ad06-8536b153e789\n;END_OF_HEADER\nT0\nM82 ;absolute extrusion mode\n\nG21 ; metric values\nG90 ; absolute positioning\nM107 ; start with the fan off\n\nM140 S{first_layer_bed_temperature[initial_extruder]} ; start bed heating\n\nG28 ; home if supported\nG1 X1 Y6 F15000 ; move X/Y to start position\nG1 Z35 F9000 ; move Z to start position\n\nM104 S{temperature[initial_extruder] + standby_temperature_delta} ; heat nozzle\n\nG280 S1 ; ultimaker home\n\n;To skip adaptive bed mesh probing uncomment G0 commands before ;LAYER:1\n;G0 X{print_bed_min[0]} Y{print_bed_max[1]}\n;G0 X{print_bed_min[0]} Y{print_bed_min[1]}\n;G0 X{print_bed_max[0]} Y{print_bed_min[1]}\n;G0 X{print_bed_max[0]} Y{print_bed_max[1]}\n;LAYER:1\n\n; purge retract_length_toolchange due to unknown state\n; prime extruders next to each other to verify extruder offset calibration\n\n; prime T0\nM104 S{first_layer_temperature[0]} T0 ; start heat nozzle temperature\nT0\nM109 S{first_layer_temperature[0]} T0 ; wait for nozzle temperature\nG90\nM82\nG0 X5 Y100 Z0.3 F7200\nG92 E0\nG1 X5 Y10 E1.9 F1000\nG0 X5 Y1 Z0.3 F7200\nG92 E0\nG1 X{print_bed_max[0]-30} Y1 E5.553 F1000\nG0 X{print_bed_max[0]-30} Y1.5 F7200\nG92 E0\nG1 X10 Y1.5 E5.458 F1000\nG0 X10 Y1.9 F7200\nM104 S{temperature[initial_extruder] + standby_temperature_delta} ; cool nozzle\nM104 S{first_layer_temperature[1]} T1 ; start heat next nozzle temperature\nG92 E0\nG1 X{print_bed_max[0]-28} Y1.9 E5.489 F1000\nG92 E0\nG1 E-3.5 F1200\nG0 X{print_bed_max[0]-20} Y3 F18000\nG0 X{print_bed_max[0]-15} Y10 Z3 F2400\n\nG0 X30 Y10 Z0.3 F7200\nG92 E0\nG1 E3.5 F1200\nG92 E0\nG0 Y110 E1.85 F1000\nG92 E0\nG1 E-{retract_length_toolchange[0]} F1200\nG0 Y150 F18000\nG0 Y{print_bed_max[1]} Z5 F18000\n\n; prime T1\nT1\nM109 S{first_layer_temperature[1]} T1 ; wait for nozzle temperature\nG90\nM82\nG0 X5 Y100 Z0.3 F7200\nG0 Y10 E1.9 F1000\nG0 Y2.5 F7200\nG92 E0\nG1 X{print_bed_max[0]-30} Y2.5 E5.553 F1000\nG0 X{print_bed_max[0]-30} Y2.9 F7200\nG92 E0\nG1 X10 Y2.9 E5.458 F1000\nG0 X10 Y3.3 F7200\nM104 S{temperature[1] + standby_temperature_delta} ; cool nozzle\nM104 S{first_layer_temperature[initial_extruder]} ; start heating initial nozzle\nG92 E0\nG1 X{print_bed_max[0]-28} Y3.3 E5.489 F1000\nG92 E0\nG1 E-3.5 F1200 ;retract just a little because we don't have a way to tell the slicer T1 filament position when it starts printing from E0\nG0 X{print_bed_max[0]-20} Y5 F18000\nG0 X{print_bed_max[0]-15} Y15 Z3 F2400\n\n;minus extruder1 offset X 22 which macro is not supported in start gcode\nG0 X{30+nozzle_diameter[1]-22} Y15 Z0.3 F7200\nG92 E0\nG1 E3.5 F1200\nG92 E0\nG0 Y115 E1.85 F1000\nG92 E0\nG1 E-3.5 F1200\nG0 Y150 F18000\nG0 Y{print_bed_max[1]} Z5 F18000\n\n; switch to initial nozzle\nT{initial_extruder}\nM109 S{first_layer_temperature[initial_extruder]} ; wait for nozzle temperature\nG0 X{print_bed_max[0]-30} Y5 Z10 F7200\nG0 X25 Y10 Z5\nG0 X25 Y20 Z0.3\nM82 ;absolute extrusion mode\nG92 E0\nG1 Y30 E{retract_length_toolchange[initial_extruder]} F1200 ;prime to set filament location for prusaslicer generated initial retract\nG92 E0\n\n;END Start-gcode
 end_gcode = ;End-gcode\nM104 S0\nM104 S0 T0\nM104 S0 T1\nG0 X5 Y5 Z{max_print_height} F2000\nM140 S0\nM106 S0\nM84 ; disable motors\n
+max_layer_height = 0.3
+min_layer_height = 0.06
 
 [printer:Ultimaker S3]
 inherits = *common*; *sline*