From 18e51299d6ae2fbbe75fbea983fbef7375c03103 Mon Sep 17 00:00:00 2001
From: Caroline <caroline@hartsmartproducts.com>
Date: Fri, 22 Mar 2024 16:18:13 -0500
Subject: [PATCH] Remove untested materials

---
 live/HartSmartProducts/0.1.0.ini | 65 +++-----------------------------
 1 file changed, 5 insertions(+), 60 deletions(-)

diff --git a/live/HartSmartProducts/0.1.0.ini b/live/HartSmartProducts/0.1.0.ini
index 2af8700..f40dff1 100644
--- a/live/HartSmartProducts/0.1.0.ini
+++ b/live/HartSmartProducts/0.1.0.ini
@@ -1005,7 +1005,7 @@ inherits = *PLA*; *Layer Line*
 # alias = Layer Line Engineering PLA
 temperature = 215
 bed_temperature = 60
-first_layer_temperature = 205
+first_layer_temperature = 210
 first_layer_bed_temperature = 60
 filament_cost = 34.99
 filament_density = 1.22
@@ -1022,9 +1022,9 @@ start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder]
 [filament:Layer Line Just PLAying @HSP1]
 inherits = *PLA*; *Layer Line*
 # alias = Layer Line Just PLAying
-temperature = 195
+temperature = 200
 bed_temperature = 60
-first_layer_temperature = 185
+first_layer_temperature = 195
 first_layer_bed_temperature = 60
 filament_cost = 22.99
 filament_density = 1.22
@@ -1041,7 +1041,7 @@ inherits = *PLA*; *Push Plastic*
 # alias = Push Plastic PLA
 temperature = 200
 bed_temperature = 60
-first_layer_temperature = 190
+first_layer_temperature = 195
 first_layer_bed_temperature = 60
 filament_cost = 29.99
 filament_density = 1.24
@@ -1084,30 +1084,6 @@ filament_density = 1.03
 filament_max_volumetric_speed = 20
 start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.012}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.022}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
 
-[filament:Push Plastic ASA @HSP1]
-inherits = *ASA*; *Push Plastic*
-# alias = Push Plastic ASA
-filament_spool_weight = 350
-temperature = 245
-bed_temperature = 100
-first_layer_temperature = 235
-first_layer_bed_temperature = 100
-filament_cost = 39.99
-filament_density = 1.06
-start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
-
-[filament:Push Plastic PC @HSP1]
-inherits = *PC*; *Push Plastic*
-# alias = Push Plastic PC
-filament_spool_weight = 350
-temperature = 260
-bed_temperature = 100
-first_layer_temperature = 255
-first_layer_bed_temperature = 100
-filament_cost = 54.00
-filament_density = 1.19
-start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
-
 #################### Polymaker presets ####################
 [filament:*Polymaker*]
 filament_vendor = Polymaker
@@ -1118,7 +1094,7 @@ inherits = *PLA*; *Polymaker*
 # alias = Polymaker PolyLite PLA-CF
 temperature = 205
 bed_temperature = 60
-first_layer_temperature = 195
+first_layer_temperature = 200
 first_layer_bed_temperature = 60
 filament_cost = 29.99
 filament_density = 1.29
@@ -1216,19 +1192,6 @@ filament_max_volumetric_speed = 15
 extrusion_multiplier = 0.95
 start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
 
-[filament:BASF Ultrafuse PC/ABS FR @HSP1]
-inherits = *PC*; *BASF*
-# alias = BASF Ultrafuse PC/ABS FR
-temperature = 270
-bed_temperature = 100
-first_layer_temperature = 265
-first_layer_bed_temperature = 100
-filament_cost = 80.00
-filament_density = 1.16
-filament_max_volumetric_speed = 15
-extrusion_multiplier = 0.95
-start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
-
 [filament:BASF Ultrafuse BVOH @HSP1]
 inherits = *BVOH*; *BASF*
 # alias = BASF Ultrafuse BVOH
@@ -1247,24 +1210,6 @@ start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder]
 filament_vendor = Coex
 filament_spool_weight = 350
 
-[filament:Coex Nylex CF Nylon @HSP1]
-inherits = *Nylon*; *Coex*
-# alias = Coex Nylex CF Nylon
-temperature = 270
-bed_temperature = 90
-first_layer_temperature = 265
-first_layer_bed_temperature = 90
-filament_cost = 89.99
-filament_density = 1.15
-filament_max_volumetric_speed = 15
-extrusion_multiplier = 0.89
-enable_dynamic_overhang_speeds = 1
-overhang_speed_0 = 30
-overhang_speed_1 = 25
-overhang_speed_2 = 15
-overhang_speed_3 = 10
-start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.016}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
-
 ################### Common printer presets ###################
 [printer:*common*]
 printer_technology = FFF