diff --git a/Slic3r settings MK2/filament/ColorFabb Brass Bronze 1.75mm.ini b/Slic3r settings MK2/filament/ColorFabb Brass Bronze 1.75mm.ini index 8837922..424eedd 100644 --- a/Slic3r settings MK2/filament/ColorFabb Brass Bronze 1.75mm.ini +++ b/Slic3r settings MK2/filament/ColorFabb Brass Bronze 1.75mm.ini @@ -1,13 +1,14 @@ -# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016 +# generated by Slic3r 1.31.1-prusa3d-win64 on Mon Oct 24 10:57:35 2016 bed_temperature = 50 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 1 -extrusion_multiplier = 1 +extrusion_multiplier = 1.3 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #B79A39 filament_diameter = 1.75 +filament_settings_id = first_layer_bed_temperature = 50 first_layer_temperature = 210 max_fan_speed = 100 diff --git a/Slic3r settings MK2/filament/ColorFabb Wood Bamboo 1.75mm.ini b/Slic3r settings MK2/filament/ColorFabb Wood Bamboo 1.75mm.ini index 4186979..940b6b1 100644 --- a/Slic3r settings MK2/filament/ColorFabb Wood Bamboo 1.75mm.ini +++ b/Slic3r settings MK2/filament/ColorFabb Wood Bamboo 1.75mm.ini @@ -1,13 +1,14 @@ -# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016 +# generated by Slic3r 1.31.1-prusa3d-win64 on Mon Oct 24 10:57:49 2016 bed_temperature = 50 bridge_fan_speed = 100 cooling = 1 disable_fan_first_layers = 1 -extrusion_multiplier = 1 +extrusion_multiplier = 1.3 fan_always_on = 1 fan_below_layer_time = 100 filament_colour = #5A4110 filament_diameter = 1.75 +filament_settings_id = first_layer_bed_temperature = 50 first_layer_temperature = 210 max_fan_speed = 100 diff --git a/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini b/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini index e55286d..eab7877 100644 --- a/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini +++ b/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini @@ -1,6 +1,6 @@ -# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016 +# generated by Slic3r 1.31.1-prusa3d-win64 on Mon Oct 24 09:49:44 2016 bed_temperature = 65 -bridge_fan_speed = 100 +bridge_fan_speed = 50 cooling = 1 disable_fan_first_layers = 3 extrusion_multiplier = 1 @@ -8,6 +8,7 @@ fan_always_on = 1 fan_below_layer_time = 20 filament_colour = #000000 filament_diameter = 1.75 +filament_settings_id = first_layer_bed_temperature = 90 first_layer_temperature = 240 max_fan_speed = 50 diff --git a/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini b/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini index c4bf1cb..e7d86ba 100644 --- a/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini +++ b/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep 6 15:18:13 2016 +# generated by Slic3r 1.31.0.8-prusa3d-win64 on Fri Oct 21 13:51:35 2016 bed_temperature = 90 bridge_fan_speed = 50 cooling = 1 @@ -9,8 +9,8 @@ fan_below_layer_time = 20 filament_colour = #B5F5FD filament_diameter = 1.75 filament_settings_id = -first_layer_bed_temperature = 90 -first_layer_temperature = 240 +first_layer_bed_temperature = 85 +first_layer_temperature = 230 max_fan_speed = 50 min_fan_speed = 30 min_print_speed = 5 diff --git a/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini b/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini index 959dd71..74a368d 100644 --- a/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini +++ b/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.3.0-dev on Sat May 7 00:23:06 2016 +# generated by Slic3r 1.31.0.3-prusa3d-win64 on Tue Oct 18 16:03:11 2016 bed_temperature = 55 bridge_fan_speed = 100 cooling = 1 @@ -10,9 +10,9 @@ filament_colour = #FF14E2 filament_diameter = 1.75 filament_settings_id = first_layer_bed_temperature = 55 -first_layer_temperature = 210 +first_layer_temperature = 215 max_fan_speed = 100 min_fan_speed = 85 min_print_speed = 15 slowdown_below_layer_time = 25 -temperature = 210 +temperature = 205 diff --git a/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini b/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini index 496b3c6..c88ef42 100644 --- a/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini +++ b/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep 6 15:01:11 2016 +# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Wed Oct 19 11:32:18 2016 bed_temperature = 50 bridge_fan_speed = 100 cooling = 0 @@ -10,7 +10,7 @@ filament_colour = #00CA0A filament_diameter = 1.75 filament_settings_id = first_layer_bed_temperature = 50 -first_layer_temperature = 230 +first_layer_temperature = 210 max_fan_speed = 90 min_fan_speed = 70 min_print_speed = 5 diff --git a/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini b/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini index 9dcadca..9b92613 100644 --- a/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini +++ b/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini @@ -1,41 +1,44 @@ -# generated by Slic3r 1.3.0-dev on Sun May 15 18:59:57 2016 +# generated by Slic3r 1.31.1.3-prusa3d-win64 on Tue Oct 25 15:41:13 2016 avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 -bridge_acceleration = 600 +bottom_solid_layers = 10 +bridge_acceleration = 300 bridge_flow_ratio = 0.7 bridge_speed = 20 brim_width = 0 complete_objects = 0 -default_acceleration = 1000 +default_acceleration = 500 dont_support_bridges = 1 +ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear -external_perimeter_extrusion_width = 0.25 +external_perimeter_extrusion_width = 0 external_perimeter_speed = 20 external_perimeters_first = 0 extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 -extrusion_width = 0.25 +extrusion_width = 0.28 fill_angle = 45 -fill_density = 5% +fill_density = 20% fill_pattern = grid -first_layer_acceleration = 1000 +first_layer_acceleration = 500 first_layer_extrusion_width = 0.3 -first_layer_height = 0.15 +first_layer_height = 0.2 first_layer_speed = 70% -gap_fill_speed = 40 +gap_fill_speed = 20 gcode_comments = 0 -infill_acceleration = 2000 +infill_acceleration = 800 infill_every_layers = 1 infill_extruder = 1 -infill_extrusion_width = 0.25 +infill_extrusion_width = 0 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 0 -infill_speed = 60 +infill_overlap = 25% +infill_speed = 20 interface_shells = 0 layer_height = 0.05 max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = @@ -43,11 +46,11 @@ only_retract_when_crossing_perimeters = 0 ooze_prevention = 0 output_filename_format = [input_filename_base].gcode overhangs = 0 -perimeter_acceleration = 600 +perimeter_acceleration = 300 perimeter_extruder = 1 -perimeter_extrusion_width = 0.25 -perimeter_speed = 25 -perimeters = 3 +perimeter_extrusion_width = 0 +perimeter_speed = 20 +perimeters = 4 post_process = print_settings_id = raft_layers = 0 @@ -56,32 +59,34 @@ seam_position = nearest skirt_distance = 2 skirt_height = 1 skirts = 1 -small_perimeter_speed = 5 +small_perimeter_speed = 10 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 -solid_infill_extrusion_width = 0.25 -solid_infill_speed = 40 +solid_infill_extrusion_width = 0 +solid_infill_speed = 20 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 -support_material_contact_distance = 0.05 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.1 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.35 support_material_interface_extruder = 1 -support_material_interface_layers = 3 +support_material_interface_layers = 0 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 1 -support_material_speed = 50 +support_material_speed = 20 support_material_threshold = 40 +support_material_with_sheath = 0 thin_walls = 0 threads = 4 -top_infill_extrusion_width = 0.25 -top_solid_infill_speed = 30 -top_solid_layers = 8 -travel_speed = 120 +top_infill_extrusion_width = 0 +top_solid_infill_speed = 20 +top_solid_layers = 15 +travel_speed = 200 xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.05mm DETAIL.ini b/Slic3r settings MK2/print/0.05mm DETAIL.ini index 7970274..610a849 100644 --- a/Slic3r settings MK2/print/0.05mm DETAIL.ini +++ b/Slic3r settings MK2/print/0.05mm DETAIL.ini @@ -1,29 +1,30 @@ -# generated by Slic3r 1.2.9 on Fri Oct 30 17:00:12 2015 +# generated by Slic3r 1.31.1.3-prusa3d-win64 on Tue Oct 25 15:43:34 2016 avoid_crossing_perimeters = 0 -bottom_solid_layers = 8 +bottom_solid_layers = 10 bridge_acceleration = 0 -bridge_flow_ratio = 0.1 +bridge_flow_ratio = 0.7 bridge_speed = 20 brim_width = 0 complete_objects = 0 default_acceleration = 0 dont_support_bridges = 1 +ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0 external_perimeter_speed = 20 external_perimeters_first = 0 -extra_perimeters = 1 +extra_perimeters = 0 extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.3 fill_angle = 45 -fill_density = 15% -fill_pattern = rectilinear +fill_density = 20% +fill_pattern = grid first_layer_acceleration = 0 first_layer_extrusion_width = 0.45 first_layer_height = 0.2 -first_layer_speed = 80% -gap_fill_speed = 0 +first_layer_speed = 70% +gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 0 infill_every_layers = 1 @@ -31,11 +32,13 @@ infill_extruder = 1 infill_extrusion_width = 0.5 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 4% -infill_speed = 40 +infill_overlap = 25% +infill_speed = 30 interface_shells = 0 layer_height = 0.05 max_print_speed = 80 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = @@ -46,12 +49,13 @@ overhangs = 0 perimeter_acceleration = 0 perimeter_extruder = 1 perimeter_extrusion_width = 0 -perimeter_speed = 40 +perimeter_speed = 30 perimeters = 4 post_process = +print_settings_id = raft_layers = 0 resolution = 0 -seam_position = random +seam_position = nearest skirt_distance = 2 skirt_height = 1 skirts = 1 @@ -60,27 +64,29 @@ solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 solid_infill_extrusion_width = 0 -solid_infill_speed = 40 +solid_infill_speed = 30 spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 -support_material_contact_distance = 0.2 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.1 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.3 support_material_interface_extruder = 1 -support_material_interface_layers = 3 +support_material_interface_layers = 0 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 1.5 -support_material_speed = 50 -support_material_threshold = 0 +support_material_speed = 30 +support_material_threshold = 40 +support_material_with_sheath = 0 thin_walls = 0 -threads = 1 +threads = 4 top_infill_extrusion_width = 0 top_solid_infill_speed = 20 -top_solid_layers = 10 +top_solid_layers = 15 travel_speed = 200 xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini b/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini index 214dcc3..a9ac91f 100644 --- a/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini +++ b/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini @@ -1,6 +1,6 @@ -# generated by Slic3r 1.3.0-dev on Sun May 15 17:55:23 2016 +# generated by Slic3r 1.31.1.3-prusa3d-win64 on Tue Oct 25 15:41:23 2016 avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 +bottom_solid_layers = 10 bridge_acceleration = 600 bridge_flow_ratio = 0.7 bridge_speed = 20 @@ -8,6 +8,7 @@ brim_width = 0 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.25 external_perimeter_speed = 20 @@ -17,7 +18,7 @@ extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.25 fill_angle = 45 -fill_density = 5% +fill_density = 15% fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.3 @@ -25,17 +26,19 @@ first_layer_height = 0.15 first_layer_speed = 70% gap_fill_speed = 40 gcode_comments = 0 -infill_acceleration = 2000 +infill_acceleration = 1600 infill_every_layers = 1 infill_extruder = 1 infill_extrusion_width = 0.25 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 0 -infill_speed = 60 +infill_overlap = 25% +infill_speed = 40 interface_shells = 0 layer_height = 0.1 max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = @@ -47,7 +50,7 @@ perimeter_acceleration = 600 perimeter_extruder = 1 perimeter_extrusion_width = 0.25 perimeter_speed = 25 -perimeters = 2 +perimeters = 4 post_process = print_settings_id = raft_layers = 0 @@ -56,7 +59,7 @@ seam_position = nearest skirt_distance = 2 skirt_height = 1 skirts = 1 -small_perimeter_speed = 5 +small_perimeter_speed = 10 solid_infill_below_area = 0 solid_infill_every_layers = 0 solid_infill_extruder = 1 @@ -66,22 +69,24 @@ spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 -support_material_contact_distance = 0.05 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.15 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.35 support_material_interface_extruder = 1 -support_material_interface_layers = 3 +support_material_interface_layers = 0 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 1 support_material_speed = 50 support_material_threshold = 40 +support_material_with_sheath = 0 thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.25 top_solid_infill_speed = 30 -top_solid_layers = 6 +top_solid_layers = 12 travel_speed = 120 xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.10mm DETAIL.ini b/Slic3r settings MK2/print/0.10mm DETAIL.ini index 5ab6ea2..8e648b7 100644 --- a/Slic3r settings MK2/print/0.10mm DETAIL.ini +++ b/Slic3r settings MK2/print/0.10mm DETAIL.ini @@ -1,13 +1,14 @@ -# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep 6 15:02:22 2016 +# generated by Slic3r 1.31.1.3-prusa3d-win64 on Tue Oct 25 15:42:09 2016 avoid_crossing_perimeters = 0 -bottom_solid_layers = 4 +bottom_solid_layers = 10 bridge_acceleration = 1000 -bridge_flow_ratio = 0.8 +bridge_flow_ratio = 0.7 bridge_speed = 20 brim_width = 0 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 25 @@ -22,7 +23,7 @@ fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 first_layer_height = 0.15 -first_layer_speed = 60% +first_layer_speed = 70% gap_fill_speed = 40 gcode_comments = 0 infill_acceleration = 2000 @@ -31,11 +32,13 @@ infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 0 +infill_overlap = 25% infill_speed = 60 interface_shells = 0 layer_height = 0.1 max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = @@ -47,12 +50,12 @@ perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 40 -perimeters = 4 +perimeters = 3 post_process = print_settings_id = raft_layers = 0 resolution = 0 -seam_position = random +seam_position = nearest skirt_distance = 2 skirt_height = 1 skirts = 1 @@ -66,22 +69,24 @@ spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 -support_material_contact_distance = 0.05 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.35 support_material_interface_extruder = 1 -support_material_interface_layers = 3 +support_material_interface_layers = 0 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear -support_material_spacing = 1 +support_material_spacing = 1.5 support_material_speed = 50 support_material_threshold = 40 -thin_walls = 1 +support_material_with_sheath = 0 +thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.45 top_solid_infill_speed = 30 -top_solid_layers = 6 +top_solid_layers = 12 travel_speed = 120 xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.20mm NORMAL.ini b/Slic3r settings MK2/print/0.20mm NORMAL.ini index 2b4fa25..62f7635 100644 --- a/Slic3r settings MK2/print/0.20mm NORMAL.ini +++ b/Slic3r settings MK2/print/0.20mm NORMAL.ini @@ -1,6 +1,6 @@ -# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3 on Sat Jun 18 16:05:03 2016 +# generated by Slic3r 1.31.1.3-prusa3d-win64 on Tue Oct 25 15:40:58 2016 avoid_crossing_perimeters = 0 -bottom_solid_layers = 3 +bottom_solid_layers = 5 bridge_acceleration = 1000 bridge_flow_ratio = 0.95 bridge_speed = 20 @@ -8,6 +8,7 @@ brim_width = 0 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 30 @@ -21,8 +22,8 @@ fill_density = 10% fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 -first_layer_height = 0.15 -first_layer_speed = 60% +first_layer_height = 0.2 +first_layer_speed = 70% gap_fill_speed = 40 gcode_comments = 0 infill_acceleration = 2000 @@ -31,11 +32,13 @@ infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 15% +infill_overlap = 25% infill_speed = 60 interface_shells = 0 layer_height = 0.2 max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = @@ -47,7 +50,7 @@ perimeter_acceleration = 800 perimeter_extruder = 1 perimeter_extrusion_width = 0.45 perimeter_speed = 40 -perimeters = 2 +perimeters = 3 post_process = print_settings_id = raft_layers = 0 @@ -66,22 +69,24 @@ spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 -support_material_contact_distance = 0.05 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.35 support_material_interface_extruder = 1 -support_material_interface_layers = 2 +support_material_interface_layers = 0 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 1.5 support_material_speed = 50 support_material_threshold = 40 +support_material_with_sheath = 0 thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 top_solid_infill_speed = 20 -top_solid_layers = 4 +top_solid_layers = 6 travel_speed = 120 xy_size_compensation = 0 diff --git a/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini b/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini index cebafcd..55c9253 100644 --- a/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini +++ b/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep 6 15:17:32 2016 +# generated by Slic3r 1.31.1.3-prusa3d-win64 on Tue Oct 25 15:41:35 2016 avoid_crossing_perimeters = 0 bottom_solid_layers = 5 bridge_acceleration = 1000 @@ -8,6 +8,7 @@ brim_width = 0 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.45 external_perimeter_speed = 15 @@ -21,8 +22,8 @@ fill_density = 10% fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 -first_layer_height = 0.15 -first_layer_speed = 60% +first_layer_height = 0.2 +first_layer_speed = 70% gap_fill_speed = 20 gcode_comments = 0 infill_acceleration = 2000 @@ -31,11 +32,13 @@ infill_extruder = 1 infill_extrusion_width = 0.45 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 15% +infill_overlap = 25% infill_speed = 15 interface_shells = 0 layer_height = 0.2 max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = @@ -66,18 +69,20 @@ spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 -support_material_contact_distance = 0.05 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.5 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.35 support_material_interface_extruder = 1 -support_material_interface_layers = 2 +support_material_interface_layers = 0 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear support_material_spacing = 1.5 support_material_speed = 15 support_material_threshold = 40 +support_material_with_sheath = 0 thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.4 diff --git a/Slic3r settings MK2/print/0.35mm FAST.ini b/Slic3r settings MK2/print/0.35mm FAST.ini index bbc6e08..e297f0b 100644 --- a/Slic3r settings MK2/print/0.35mm FAST.ini +++ b/Slic3r settings MK2/print/0.35mm FAST.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.30.0-prusa3d-release_candidate_1_3 on Wed May 18 17:55:55 2016 +# generated by Slic3r 1.31.1.3-prusa3d-win64 on Tue Oct 25 15:41:40 2016 avoid_crossing_perimeters = 0 bottom_solid_layers = 3 bridge_acceleration = 1000 @@ -8,6 +8,7 @@ brim_width = 0 complete_objects = 0 default_acceleration = 1000 dont_support_bridges = 1 +ensure_vertical_shell_thickness = 1 external_fill_pattern = rectilinear external_perimeter_extrusion_width = 0.7 external_perimeter_speed = 30 @@ -17,12 +18,12 @@ extruder_clearance_height = 20 extruder_clearance_radius = 20 extrusion_width = 0.7 fill_angle = 45 -fill_density = 15% +fill_density = 10% fill_pattern = grid first_layer_acceleration = 1000 first_layer_extrusion_width = 0.42 -first_layer_height = 0.15 -first_layer_speed = 60% +first_layer_height = 0.2 +first_layer_speed = 70% gap_fill_speed = 40 gcode_comments = 0 infill_acceleration = 2000 @@ -31,11 +32,13 @@ infill_extruder = 1 infill_extrusion_width = 0.7 infill_first = 0 infill_only_where_needed = 0 -infill_overlap = 0.1 +infill_overlap = 25% infill_speed = 60 interface_shells = 0 layer_height = 0.35 max_print_speed = 100 +max_volumetric_extrusion_rate_slope_negative = 0 +max_volumetric_extrusion_rate_slope_positive = 0 max_volumetric_speed = 0 min_skirt_length = 4 notes = @@ -66,19 +69,21 @@ spiral_vase = 0 standby_temperature_delta = -5 support_material = 0 support_material_angle = 0 -support_material_contact_distance = 0.05 +support_material_buildplate_only = 0 +support_material_contact_distance = 0.2 support_material_enforce_layers = 0 support_material_extruder = 1 support_material_extrusion_width = 0.35 support_material_interface_extruder = 1 -support_material_interface_layers = 3 +support_material_interface_layers = 0 support_material_interface_spacing = 0 support_material_interface_speed = 100% support_material_pattern = rectilinear -support_material_spacing = 1 +support_material_spacing = 1.5 support_material_speed = 50 support_material_threshold = 40 -thin_walls = 1 +support_material_with_sheath = 0 +thin_walls = 0 threads = 4 top_infill_extrusion_width = 0.74 top_solid_infill_speed = 50 diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 with ZHop.ini b/Slic3r settings MK2/printer/Original Prusa i3 MK2 with ZHop.ini index 19be194..4b45017 100644 --- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 with ZHop.ini +++ b/Slic3r settings MK2/printer/Original Prusa i3 MK2 with ZHop.ini @@ -1,4 +1,4 @@ -# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep 6 15:10:06 2016 +# generated by Slic3r 1.31.1-prusa3d-win64 on Mon Oct 24 12:11:42 2016 bed_shape = 0x0,250x0,250x210,0x210 before_layer_gcode = end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors @@ -14,7 +14,7 @@ retract_before_travel = 1 retract_layer_change = 1 retract_length = 0.8 retract_length_toolchange = 3 -retract_lift = 0.15 +retract_lift = 0.5 retract_lift_above = 1 retract_lift_below = 199 retract_restart_extra = 0 @@ -27,6 +27,5 @@ toolchange_gcode = use_firmware_retraction = 0 use_relative_e_distances = 1 use_volumetric_e = 0 -vibration_limit = 0 wipe = 1 z_offset = 0