diff --git a/live/RatRig/1.1.1.ini b/live/RatRig/1.1.1.ini
new file mode 100644
index 0000000..7eb9795
--- /dev/null
+++ b/live/RatRig/1.1.1.ini
@@ -0,0 +1,1382 @@
+# RatRig profiles
+
+# The graphics for the bed (SVG) was created by PwnCNC and published on Thingiverse under the Creative Commons Attribution license: https://www.thingiverse.com/thing:4861532/files
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = RatRig
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the Slic3r configuration to be downgraded.
+config_version = 1.1.1
+
+#The file was restrutured to allow for easier future iteration, making the overall settings more intuitive to find.
+#
+#Wizard Selection
+#Print settings Geral
+#Nozzle Settings
+#Layer heigh Settings
+#Speed profiles
+#Visible Profiles
+#Printer Settings
+#Visible machines
+#Filaments
+
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/RatRig/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+#####################################################################################################################################################################################################
+# WIZARD SELECTION ##################################################################################################################################################################################
+#####################################################################################################################################################################################################
+
+# VC4 COREXY ####
+[printer_model:VC4_300 COREXY]
+name = RatRig V-Core-4.0 CoreXY 300mm
+variants = 0.4; 0.5; 0.6
+family = V-Core-4
+bed_model = rr-vc-300.stl
+bed_texture = rr-vc-300.svg
+thumbnail = vc4-corexy.png
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+[printer_model:VC4_400 COREXY]
+name = RatRig V-Core-4.0 CoreXY 400mm
+variants = 0.4; 0.5; 0.6
+family = V-Core-4
+bed_model = rr-vc-400.stl
+bed_texture = rr-vc-400.svg
+thumbnail = vc4-corexy.png
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+[printer_model:VC4_500 COREXY]
+name = RatRig V-Core-4.0 CoreXY 500mm
+variants = 0.4; 0.5; 0.6
+family = V-Core-4
+bed_model = rr-vc-500.stl
+bed_texture = rr-vc-500.svg
+thumbnail = vc4-corexy.png
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+# VC4 Hybrid ####
+[printer_model:VC4_300 HYBRID]
+name = RatRig V-Core-4.0 HYBRID 300mm
+variants = 0.4; 0.5; 0.6
+family = V-Core-4
+bed_model = rr-vc-300.stl
+bed_texture = rr-vc-300.svg
+thumbnail = vc4-hybrid.png
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+[printer_model:VC4_400 HYBRID]
+name = RatRig V-Core-4.0 HYBRID 400mm
+variants = 0.4; 0.5; 0.6
+family = V-Core-4
+bed_model = rr-vc-400.stl
+bed_texture = rr-vc-400.svg
+thumbnail = vc4-hybrid.png
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+[printer_model:VC4_500 HYBRID]
+name = RatRig V-Core-4.0 HYBRID 500mm
+variants = 0.4; 0.5; 0.6
+family = V-Core-4
+bed_model = rr-vc-500.stl
+bed_texture = rr-vc-500.svg
+thumbnail = vc4-hybrid.png
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+# V-Core 3 ###
+[printer_model:VC3_300]
+name = RatRig V-Core-3.1 300mm
+variants = 0.4; 0.5; 0.6
+technology = FFF
+family = V-Core-3
+bed_model = rr-vc-300.stl
+bed_texture = rr-vc-300.svg
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+[printer_model:VC3_400]
+name = RatRig V-Core-3.1 400mm
+variants = 0.4; 0.5; 0.6
+family = V-Core-3
+bed_model = rr-vc-400.stl
+bed_texture = rr-vc-400.svg
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+[printer_model:VC3_500]
+name = RatRig V-Core-3.1 500mm
+variants = 0.4; 0.5; 0.6
+family = V-Core-3
+bed_model = rr-vc-500.stl
+bed_texture = rr-vc-500.svg
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+# V-Minion ###
+[printer_model:VMINION]
+name = RatRig V-Minion
+variants = 0.4; 0.5; 0.6
+technology = FFF
+family = V-Minion
+bed_model = rr-vminion.stl
+bed_texture = rr-vminion.svg
+default_materials = PunkFil ABS @RatRig; PunkFil PETG @RatRig; PunkFil PETG CF 10 @RatRig
+
+
+################################################################################################################################################################################################################
+# PRINT SETTING PROFILES #######################################################################################################################################################################################
+################################################################################################################################################################################################################
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+[print:*common*]
+allow_empty_layers = 0
+top_solid_layers = 4
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+extra_perimeters = 0
+bottom_solid_layers = 3
+bottom_solid_min_thickness = 0
+bridge_angle = 0
+brim_offset = 0.25
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+dont_support_bridges = 1
+draft_shield = 0
+ensure_vertical_shell_thickness = 1
+exact_last_layer_height = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+fill_angle = 45
+fill_density = 25%
+fill_pattern = adaptivecubic
+gap_fill = 1
+gcode_comments = 0
+infill_anchor = 600%
+infill_anchor_max = 5
+infill_every_layers = 1
+infill_extruder = 1
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 18%
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top 
+min_skirt_length = 4
+notes = Generic print settings recomended by RatRig, you may change them.
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{filament_type[0]}_{print_settings_id}_{print_time}.gcode
+perimeter_extruder = 1
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 10
+skirt_height = 1
+skirts = 2
+slice_closing_radius = 0.049
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_speed = 100%
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 0
+support_material_buildplate_only = 1
+support_material_contact_distance_bottom = 0.2
+support_material_contact_distance_top = 0.2
+support_material_extruder = 0
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 0
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 65
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 1
+top_fill_pattern = monotonic
+top_solid_infill_speed = 100%
+top_solid_min_thickness = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+elefant_foot_compensation = 0.1
+bridge_flow_ratio = 0.85
+perimeter_generator = classic
+thick_bridges = 0
+
+#NOZZLE SETTINGS#############################################################################################################################################################################
+
+[print:*0.4nozzle*]
+perimeters = 4
+support_material_interface_spacing = 0.2
+support_material_spacing = 1
+first_layer_height = 0.3
+extrusion_width = 0.45
+external_perimeter_extrusion_width = 0.45
+first_layer_extrusion_width = 0.5
+infill_extrusion_width = 0.45
+perimeter_extrusion_width = 0.45
+solid_infill_extrusion_width = 0.45
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.45
+
+[print:*0.5nozzle*]
+perimeters = 4
+support_material_interface_spacing = 0.2
+support_material_spacing = 1.1
+first_layer_height = 0.3
+extrusion_width = 0.55
+external_perimeter_extrusion_width = 0.52
+first_layer_extrusion_width = 0.7
+infill_extrusion_width = 0.55
+perimeter_extrusion_width = 0.55
+solid_infill_extrusion_width = 0.55
+top_infill_extrusion_width = 0.55
+support_material_extrusion_width = 0.55
+
+[print:*0.6nozzle*]
+perimeters = 3
+support_material_interface_spacing = 0.3
+support_material_spacing = 1.2
+first_layer_height = 0.35
+extrusion_width = 0.65
+external_perimeter_extrusion_width = 0.65
+first_layer_extrusion_width = 0.84
+infill_extrusion_width = 0.65
+perimeter_extrusion_width = 0.65
+solid_infill_extrusion_width = 0.65
+top_infill_extrusion_width = 0.65
+support_material_extrusion_width = 0.65
+
+###########################################################################################################################################################################
+# LAYER HEIGH SETTINGS ####################################################################################################################################################
+# DONT EDIT ###############################################################################################################################################################
+
+[print:*0.20mm*] 
+inherits = *common*
+layer_height = 0.2
+
+[print:*0.25mm*] 
+inherits = *common*
+layer_height = 0.25
+
+[print:*0.30mm*] 
+inherits = *common*
+layer_height = 0.3
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 20
+overhang_speed_1 = 45
+overhang_speed_2 = 80
+overhang_speed_3 = 100
+
+# SPEED PROFILES #####################################################################################################################################################################################################################################################
+
+[print:*VC4_COREXY_SPEED*]
+default_acceleration = 10000 
+infill_speed = 400 
+max_print_speed = 500 
+infill_acceleration = 10000
+max_volumetric_speed = 40 
+perimeter_acceleration = 8000
+perimeter_speed = 350   
+external_perimeter_speed = 250
+external_perimeter_acceleration = 4000
+small_perimeter_speed = 250
+travel_speed = 500
+travel_acceleration = 10000
+travel_speed_z = 50
+bridge_speed = 50
+bridge_acceleration = 2500
+first_layer_acceleration = 1500
+first_layer_speed = 50
+gap_fill_speed = 200
+
+[print:*VC4_COREXY_SPEED_PERFORMANCE*]
+default_acceleration = 10000 
+infill_speed = 500 
+max_print_speed = 500 
+infill_acceleration = 10000
+max_volumetric_speed = 40 
+perimeter_acceleration = 10000
+perimeter_speed = 400   
+external_perimeter_speed = 400
+external_perimeter_acceleration = 8000
+small_perimeter_speed = 350
+travel_speed = 600
+travel_acceleration = 15000
+travel_speed_z = 50
+bridge_speed = 150
+bridge_acceleration = 5000
+first_layer_acceleration = 2500
+first_layer_speed = 200
+gap_fill_speed = 200
+perimeters = 2
+
+[print:*VC4_HYBRID_SPEED*]
+default_acceleration = 15000 
+infill_speed = 400
+max_print_speed = 500 
+infill_acceleration = 15000
+max_volumetric_speed = 40 
+perimeter_acceleration = 10000
+perimeter_speed = 300   
+external_perimeter_speed = 250
+external_perimeter_acceleration = 8000
+small_perimeter_speed = 250
+travel_speed = 600
+travel_acceleration = 15000
+travel_speed_z = 50
+bridge_speed = 50
+bridge_acceleration = 5000
+first_layer_acceleration = 2500
+first_layer_speed = 80
+gap_fill_speed = 200
+
+[print:*VC4_HYBRID_SPEED_PERFORMANCE*]
+default_acceleration = 20000 
+infill_speed = 500 
+max_print_speed = 500 
+infill_acceleration = 20000
+max_volumetric_speed = 40 
+perimeter_acceleration = 20000
+perimeter_speed = 500   
+external_perimeter_speed = 500
+external_perimeter_acceleration = 15000
+small_perimeter_speed = 500
+travel_speed = 800
+travel_acceleration = 10000
+travel_speed_z = 50
+bridge_speed = 150
+bridge_acceleration = 5000
+first_layer_acceleration = 2500
+first_layer_speed = 200
+gap_fill_speed = 200
+perimeters = 2
+
+[print:*VC3_SPEED*]
+default_acceleration = 10000 
+infill_speed = 350 
+max_print_speed = 350 
+infill_acceleration = 10000
+max_volumetric_speed = 40 
+perimeter_acceleration = 8000
+perimeter_speed = 350 
+external_perimeter_speed = 200
+external_perimeter_acceleration = 3000   
+small_perimeter_speed = 200
+travel_speed = 500 
+travel_speed_z = 30
+bridge_speed = 35
+bridge_acceleration = 2500
+first_layer_acceleration = 1500
+first_layer_speed = 50
+gap_fill_speed = 200
+
+[print:*VM1_SPEED*]
+default_acceleration = 4000 
+infill_speed = 250 
+max_print_speed = 250 
+infill_acceleration = 8000
+max_volumetric_speed = 18 
+perimeter_acceleration = 4000
+perimeter_speed = 250  
+external_perimeter_speed = 70%
+external_perimeter_acceleration = 2500  
+small_perimeter_speed = 80
+travel_speed = 350
+travel_speed_z = 25
+bridge_speed = 10
+bridge_acceleration = 1000
+first_layer_acceleration = 1500
+first_layer_speed = 40
+gap_fill_speed = 150
+
+# ACTUAL PROFILES VISIBLE BY THE USER ##############################################################################################################################################################################################
+
+# VC4 CORE XY #####
+
+# Nozzle 0.4
+[print:QUALITY_0.20mm_Nozzle_0.4_VC4_CoreXY]
+inherits = *common*; *0.4nozzle*; *VC4_COREXY_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VCore4XYsettings*/ and nozzle_diameter[0]==0.4
+
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.4_VC4_CoreXY]
+inherits = *common*; *0.4nozzle*; *VC4_COREXY_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4XYsettings*/ and nozzle_diameter[0]==0.4
+
+[print:SPEED_0.25mm_Nozzle_0.4_VC4_CoreXY]
+inherits = *common*; *0.4nozzle*; *VC4_COREXY_SPEED_PERFORMANCE*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4XYsettings*/ and nozzle_diameter[0]==0.4
+notes = BE CAREFULL, THIS IS A HIGH SPEED PROFILE, DO NOT USE IT UNLESS YOU ARE SURE YOUR MACHINE IS MECHANICALLY WELL TUNED!
+skirts = 0
+bottom_solid_layers = 2
+fill_density = 10%
+top_solid_layers = 3
+
+# Nozzle 0.5
+[print:QUALITY_0.20mm_Nozzle_0.5_VC4_CoreXY]
+inherits = *common*; *0.5nozzle*; *VC4_COREXY_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VCore4XYsettings*/ and nozzle_diameter[0]==0.5
+
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.5_VC4_CoreXY]
+inherits = *common*; *0.5nozzle*; *VC4_COREXY_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4XYsettings*/ and nozzle_diameter[0]==0.5
+
+[print:SPEED_0.25mm_Nozzle_0.5_VC4_CoreXY]
+inherits = *common*; *0.5nozzle*; *VC4_COREXY_SPEED_PERFORMANCE*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4XYsettings*/ and nozzle_diameter[0]==0.5
+notes = BE CAREFULL, THIS IS A HIGH SPEED PROFILE, DO NOT USE IT UNLESS YOU ARE SURE YOUR MACHINE IS MECHANICALLY WELL TUNED!
+skirts = 0
+bottom_solid_layers = 2
+fill_density = 10%
+top_solid_layers = 3
+
+# Nozzle 0.6
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.6_VC4_CoreXY]
+inherits = *common*; *0.6nozzle*; *VC4_COREXY_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4XYsettings*/ and nozzle_diameter[0]==0.6
+
+[print:BIG_0.30mm_Nozzle_0.6_VC4_CoreXY]
+inherits = *common*; *0.6nozzle*; *VC4_COREXY_SPEED*; *0.30mm*
+compatible_printers_condition = printer_notes=~/.*VCore4XYsettings*/ and nozzle_diameter[0]==0.6
+
+[print:SPEED_0.25mm_Nozzle_0.6_VC4_CoreXY]
+inherits = *common*; *0.4nozzle*; *VC4_COREXY_SPEED_PERFORMANCE*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4XYsettings*/ and nozzle_diameter[0]==0.6
+notes = BE CAREFULL, THIS IS A HIGH SPEED PROFILE, DO NOT USE IT UNLESS YOU ARE SURE YOUR MACHINE IS MECHANICALLY WELL TUNED!
+skirts = 0
+bottom_solid_layers = 2
+fill_density = 10%
+top_solid_layers = 3
+
+# VC4 HYBRID ##########################################
+
+# Nozzle 0.4
+[print:QUALITY_0.20mm_Nozzle_0.4_VC4_HYBRID]
+inherits = *common*; *0.4nozzle*; *VC4_HYBRID_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VCore4HYBRIDsettings*/ and nozzle_diameter[0]==0.4
+
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.4_VC4_HYBRID]
+inherits = *common*; *0.4nozzle*; *VC4_HYBRID_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4HYBRIDsettings*/ and nozzle_diameter[0]==0.4
+
+[print:SPEED_0.25mm_Nozzle_0.4_VC4_HYBRID]
+inherits = *common*; *0.4nozzle*; *VC4_HYBRID_SPEED_PERFORMANCE*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4HYBRIDsettings*/ and nozzle_diameter[0]==0.4
+notes = BE CAREFULL, THIS IS A HIGH SPEED PROFILE, DO NOT USE IT UNLESS YOU ARE SURE YOUR MACHINE IS MECHANICALLY WELL TUNED!
+skirts = 0
+bottom_solid_layers = 2
+fill_density = 10%
+top_solid_layers = 3
+
+# Nozzle 0.5
+[print:QUALITY_0.20mm_Nozzle_0.5_VC4_HYBRID]
+inherits = *common*; *0.5nozzle*; *VC4_HYBRID_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VCore4HYBRIDsettings*/ and nozzle_diameter[0]==0.5
+
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.5_VC4_HYBRID]
+inherits = *common*; *0.5nozzle*; *VC4_HYBRID_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4HYBRIDsettings*/ and nozzle_diameter[0]==0.5
+
+[print:SPEED_0.25mm_Nozzle_0.5_VC4_HYBRID]
+inherits = *common*; *0.4nozzle*; *VC4_HYBRID_SPEED_PERFORMANCE*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4HYBRIDsettings*/ and nozzle_diameter[0]==0.5
+notes = BE CAREFULL, THIS IS A HIGH SPEED PROFILE, DO NOT USE IT UNLESS YOU ARE SURE YOUR MACHINE IS MECHANICALLY WELL TUNED!
+skirts = 0
+bottom_solid_layers = 2
+fill_density = 10%
+top_solid_layers = 3
+
+# Nozzle 0.6
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.6_VC4_HYBRID]
+inherits = *common*; *0.6nozzle*; *VC4_HYBRID_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4HYBRIDsettings*/ and nozzle_diameter[0]==0.6
+
+[print:BIG_0.30mm_Nozzle_0.6_VC4_HYBRID]
+inherits = *common*; *0.6nozzle*; *VC4_HYBRID_SPEED*; *0.30mm*
+compatible_printers_condition = printer_notes=~/.*VCore4HYBRIDsettings*/ and nozzle_diameter[0]==0.6
+
+[print:SPEED_0.25mm_Nozzle_0.6_VC4_HYBRID]
+inherits = *common*; *0.4nozzle*; *VC4_HYBRID_SPEED_PERFORMANCE*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore4HYBRIDsettings*/ and nozzle_diameter[0]==0.6
+notes = BE CAREFULL, THIS IS A HIGH SPEED PROFILE, DO NOT USE IT UNLESS YOU ARE SURE YOUR MACHINE IS MECHANICALLY WELL TUNED!
+skirts = 0
+bottom_solid_layers = 2
+fill_density = 10%
+top_solid_layers = 3
+
+# VC3 ##################################################################
+
+# Nozzle 0.4
+[print:QUALITY_0.20mm_Nozzle_0.4_VC3]
+inherits = *common*; *0.4nozzle*; *VC3_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.4
+
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.4_VC3]
+inherits = *common*; *0.4nozzle*; *VC3_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.4
+
+# Nozzle 0.5
+[print:QUALITY_0.20mm_Nozzle_0.5_VC3]
+inherits = *common*; *0.5nozzle*; *VC3_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.5
+
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.5_VC3]
+inherits = *common*; *0.5nozzle*; *VC3_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.5
+
+# Nozzle 0.6
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.6_VC3]
+inherits = *common*; *0.6nozzle*; *VC3_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.6
+
+[print:BIG_0.30mm_Nozzle_0.6_VC3]
+inherits = *common*; *0.6nozzle*; *VC3_SPEED*; *0.30mm*
+compatible_printers_condition = printer_notes=~/.*VCore3settings*/ and nozzle_diameter[0]==0.6
+
+# V-Minion ####################################################
+#VERY POOR COOLING :( ###########################################
+# Nozzle 0.4
+[print:QUALITY_0.20mm_Nozzle_0.4_VM]
+inherits = *common*; *0.4nozzle*; *VM1_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.4
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 50
+overhang_speed_3 = 80
+
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.4_VM]
+inherits = *common*; *0.4nozzle*; *VM1_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.4
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 50
+overhang_speed_3 = 80
+
+# Nozzle 0.5
+[print:QUALITY_0.20mm_Nozzle_0.5_VM]
+inherits = *common*; *0.5nozzle*; *VM1_SPEED*; *0.20mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.5
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 50
+overhang_speed_3 = 80
+
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.5_VM]
+inherits = *common*; *0.5nozzle*; *VM1_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.5
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 10
+overhang_speed_1 = 20
+overhang_speed_2 = 30
+overhang_speed_3 = 70
+
+# Nozzle 0.6
+[print:QUALITY_SPEED_0.25mm_Nozzle_0.6_VM]
+inherits = *common*; *0.6nozzle*; *VM1_SPEED*; *0.25mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.6
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 15
+overhang_speed_1 = 25
+overhang_speed_2 = 50
+overhang_speed_3 = 80
+
+[print:BIG_0.30mm_Nozzle_0.6_VM]
+inherits = *common*; *0.6nozzle*; *VM1_SPEED*; *0.30mm*
+compatible_printers_condition = printer_notes=~/.*VMinionsettings*/ and nozzle_diameter[0]==0.6
+enable_dynamic_overhang_speeds = 1   
+overhang_speed_0 = 10
+overhang_speed_1 = 20
+overhang_speed_2 = 30
+overhang_speed_3 = 70
+
+
+#########################################################################################################################################################################
+# PRINTER SETTINGS ######################################################################################################################################################
+#########################################################################################################################################################################
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+[printer:*V-Core4_0.4Nozzle*]
+before_layer_gcode = ;[layer_z]
+between_objects_gcode = ;BETWEEN_OBJECTS\nG92 E0
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "PunkFil PETG @RatRig"
+deretract_speed = 120
+end_gcode = END_PRINT\n
+extra_loading_move = -2
+extruder_colour = "#ceff00"
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 10000
+machine_max_acceleration_retracting = 10000
+machine_max_acceleration_travel = 9000,1250
+machine_max_acceleration_x = 10000
+machine_max_acceleration_y = 10000
+machine_max_acceleration_z = 200
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 400
+machine_max_feedrate_y = 400
+machine_max_feedrate_z = 50
+machine_max_jerk_e = 5
+machine_max_jerk_x = 5
+machine_max_jerk_y = 5
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_notes = VCore4XYsettings
+remaining_times = 1
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 1
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 120
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]} BED_TEMP=[first_layer_bed_temperature] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}
+thumbnails = 64x64,400x300
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+wipe = 0
+z_offset = 0
+autoemit_temperature_commands = 0
+
+[printer:*V-Core4_0.4Nozzle_HYBRID*]
+before_layer_gcode = ;[layer_z]
+between_objects_gcode = ;BETWEEN_OBJECTS\nG92 E0
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "PunkFil PETG @RatRig"
+deretract_speed = 120
+end_gcode = END_PRINT\n
+extra_loading_move = -2
+extruder_colour = "#ceff00"
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 20000
+machine_max_acceleration_extruding = 20000
+machine_max_acceleration_retracting = 20000
+machine_max_acceleration_travel = 2000,5000
+machine_max_acceleration_x = 20000
+machine_max_acceleration_y = 20000
+machine_max_acceleration_z = 200
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 50
+machine_max_jerk_e = 5
+machine_max_jerk_x = 5
+machine_max_jerk_y = 5
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_notes = VCore4HYBRIDsettings
+remaining_times = 1
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 1
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 120
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]} BED_TEMP=[first_layer_bed_temperature] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}
+thumbnails = 64x64,400x300
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+wipe = 0
+z_offset = 0
+autoemit_temperature_commands = 0
+
+[printer:*V-Core3_0.4Nozzle*]
+before_layer_gcode = ;[layer_z]
+between_objects_gcode = ;BETWEEN_OBJECTS\nG92 E0
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "PunkFil PETG @RatRig"
+deretract_speed = 120
+end_gcode = END_PRINT\n
+extra_loading_move = -2
+extruder_colour = "#ceff00"
+gcode_flavor = klipper
+high_current_on_filament_swap = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\nG92 E0\n_ON_LAYER_CHANGE LAYER={layer_num + 1}
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 8000
+machine_max_acceleration_retracting = 8000
+machine_max_acceleration_travel = 9000,1250
+machine_max_acceleration_x = 8000
+machine_max_acceleration_y = 8000
+machine_max_acceleration_z = 200
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 400
+machine_max_feedrate_y = 400
+machine_max_feedrate_z = 30
+machine_max_jerk_e = 5
+machine_max_jerk_x = 5
+machine_max_jerk_y = 5
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_notes = VCore3settings
+remaining_times = 1
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 1
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 120
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = START_PRINT EXTRUDER_TEMP={first_layer_temperature[0]} EXTRUDER_OTHER_LAYER_TEMP={temperature[0]} BED_TEMP=[first_layer_bed_temperature] TOTAL_LAYER_COUNT={total_layer_count} X0={first_layer_print_min[0]} Y0={first_layer_print_min[1]} X1={first_layer_print_max[0]} Y1={first_layer_print_max[1]}
+thumbnails = 64x64,400x300
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+wipe = 0
+z_offset = 0
+autoemit_temperature_commands = 0
+
+
+[printer:*vminion*]
+inherits = *V-Core3_0.4Nozzle*
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n;{if layer_num == 2 }SET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=1{endif}\n\n
+default_filament_profile = "PunkFil PETG @RatRig"
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VM
+deretract_speed = 100
+end_gcode = END_PRINT\n
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 7000
+machine_max_acceleration_retracting = 7000
+machine_max_acceleration_travel = 4000,1250
+machine_max_acceleration_x = 4000
+machine_max_acceleration_y = 4000
+machine_max_acceleration_z = 25
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 250
+machine_max_feedrate_y = 250
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 5
+machine_max_jerk_y = 5
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_notes = VMinionsettings
+remaining_times = 1
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 1
+retract_lift_first_layer = 0
+retract_lift_top = "All surfaces"
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 100
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = SET_GCODE_VARIABLE MACRO=RatOS VARIABLE=relative_extrusion VALUE=True\nSTART_PRINT EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature]
+start_gcode_manual = 0
+template_custom_gcode = 
+thumbnails = 64x64,400x300
+thumbnails_color = #018aff
+thumbnails_custom_color = 0
+thumbnails_with_bed = 1
+time_estimation_compensation = 100%
+tool_name = ""
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+wipe = 0
+wipe_advanced = 0
+wipe_advanced_algo = linear
+wipe_advanced_multiplier = 60
+wipe_advanced_nozzle_melted_volume = 120
+wipe_extra_perimeter = 0
+z_offset = 0
+z_step = 0.00125
+autoemit_temperature_commands = 0
+
+##################################################################################################################################################################################
+# MACHINES #######################################################################################################################################################################
+##################################################################################################################################################################################
+
+# V-Core 4 Core XY ###########################################################################
+[printer:RatRig V-Core-4.0_CoreXY-300 0.4Nozzle]
+inherits = *V-Core4_0.4Nozzle*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = VC4_300 COREXY
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VC4_CoreXY
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Core-4.0_CoreXY-300 0.5Nozzle]
+inherits = *V-Core4_0.4Nozzle*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = VC4_300 COREXY
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VC4_CoreXY
+retract_lift = 0.2
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Core-4.0_CoreXY-300 0.6Nozzle]
+inherits = *V-Core4_0.4Nozzle*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = VC4_300 COREXY
+printer_variant = 0.6
+default_print_profile = DRAFT_0.25mm_Nozzle_0.6_VC4_CoreXY
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+[printer:RatRig V-Core-4.0_CoreXY-400 0.4Nozzle]
+inherits =  *V-Core4_0.4Nozzle*
+bed_shape = 0x0,400x0,400x400,0x400
+max_print_height = 400
+printer_model = VC4_400 COREXY
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VC4_CoreXY
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Core-4.0_CoreXY-400 0.5Nozzle]
+inherits =  *V-Core4_0.4Nozzle*
+bed_shape = 0x0,400x0,400x400,0x400
+max_print_height = 400
+printer_model = VC4_400 COREXY
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VC4_CoreXY
+retract_lift = 0.2
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Core-4.0_CoreXY-400 0.6Nozzle] 
+bed_shape = 0x0,400x0,400x400,0x400
+max_print_height = 400
+printer_model = VC4_400 COREXY
+printer_variant = 0.6
+default_print_profile = QUALITY_SPEED_0.25mm_Nozzle_0.6_VC4_CoreXY
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+[printer:RatRig V-Core-4.0_CoreXY-500 0.4Nozzle]
+inherits = *V-Core4_0.4Nozzle*
+bed_shape = 0x0,500x0,500x500,0x500
+max_print_height = 500
+printer_model = VC4_500 COREXY
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VC4_CoreXY
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Core-4.0_CoreXY-500 0.5Nozzle]
+inherits = *V-Core4_0.4Nozzle*
+bed_shape = 0x0,500x0,500x500,0x500
+max_print_height = 500
+printer_model = VC4_500 COREXY
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VC4_CoreXY
+retract_lift = 0.25
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Core-4.0_CoreXY-500 0.6Nozzle]
+inherits = *V-Core4_0.4Nozzle*
+bed_shape = 0x0,500x0,500x500,0x500
+max_print_height = 500
+printer_model = VC4_500 COREXY
+printer_variant = 0.6
+default_print_profile = QUALITY_SPEED_0.25mm_Nozzle_0.6_VC4_CoreXY
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+# V-Core 4 HYBRID ###########################################################################
+[printer:RatRig V-Core-4.0_HYBRID-300 0.4Nozzle]
+inherits = *V-Core4_0.4Nozzle_HYBRID*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = VC4_300 HYBRID
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VC4_HYBRID
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Core-4.0_HYBRID-300 0.5Nozzle]
+inherits = *V-Core4_0.4Nozzle_HYBRID*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = VC4_300 HYBRID
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VC4_HYBRID
+retract_lift = 0.2
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Core-4.0_HYBRID-300 0.6Nozzle]
+inherits = *V-Core4_0.4Nozzle_HYBRID*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = VC4_300 HYBRID
+printer_variant = 0.6
+default_print_profile = QUALITY_SPEED_0.25mm_Nozzle_0.6_VC4_HYBRID
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+[printer:RatRig V-Core-4.0_HYBRID-400 0.4Nozzle]
+inherits =  *V-Core4_0.4Nozzle_HYBRID*
+bed_shape = 0x0,400x0,400x400,0x400
+max_print_height = 400
+printer_model = VC4_400 HYBRID
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VC4_HYBRID
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Core-4.0_HYBRID-400 0.5Nozzle]
+inherits =  *V-Core4_0.4Nozzle_HYBRID*
+bed_shape = 0x0,400x0,400x400,0x400
+max_print_height = 400
+printer_model = VC4_400 HYBRID
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VC4_HYBRID
+retract_lift = 0.2
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Core-4.0_HYBRID-400 0.6Nozzle]
+inherits =  *V-Core4_0.4Nozzle_HYBRID*
+bed_shape = 0x0,400x0,400x400,0x400
+max_print_height = 400
+printer_model = VC4_400 HYBRID
+printer_variant = 0.6
+default_print_profile = QUALITY_SPEED_0.25mm_Nozzle_0.6_VC4_HYBRID
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+[printer:RatRig V-Core-4.0_HYBRID-500 0.4Nozzle]
+inherits = *V-Core4_0.4Nozzle_HYBRID*
+bed_shape = 0x0,500x0,500x500,0x500
+max_print_height = 500
+printer_model = VC4_500 HYBRID
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VC4_HYBRID
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Core-4.0_HYBRID-500 0.5Nozzle]
+inherits = *V-Core4_0.4Nozzle_HYBRID*
+bed_shape = 0x0,500x0,500x500,0x500
+max_print_height = 500
+printer_model = VC4_500 HYBRID
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VC4_HYBRID
+retract_lift = 0.25
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Core-4.0_HYBRID-500 0.6Nozzle]
+inherits = *V-Core4_0.4Nozzle_HYBRID*
+bed_shape = 0x0,500x0,500x500,0x500
+max_print_height = 500
+printer_model = VC4_500 HYBRID
+printer_variant = 0.6
+default_print_profile = QUALITY_SPEED_0.25mm_Nozzle_0.6_VC4_HYBRID
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+# V-Core 3.1 ###########################################################################
+[printer:RatRig V-Core-3.1-300 0.4Nozzle]
+inherits = *V-Core3_0.4Nozzle*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = VC3_300
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VC3
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Core-3.1-300 0.5Nozzle]
+inherits = *V-Core3_0.4Nozzle*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = VC3_300
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VC3
+retract_lift = 0.2
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Core-3.1-300 0.6Nozzle]
+inherits = *V-Core3_0.4Nozzle*
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 300
+printer_model = VC3_300
+printer_variant = 0.6
+default_print_profile = QUALITY_SPEED_0.25mm_Nozzle_0.6_VC3
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+
+[printer:RatRig V-Core-3.1-400 0.4Nozzle]
+inherits =  *V-Core3_0.4Nozzle*
+bed_shape = 0x0,400x0,400x400,0x400
+max_print_height = 400
+printer_model = VC3_400
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VC3
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Core-3.1-400 0.5Nozzle]
+inherits =  *V-Core3_0.4Nozzle*
+bed_shape = 0x0,400x0,400x400,0x400
+max_print_height = 400
+printer_model = VC3_400
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VC3
+retract_lift = 0.2
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Core-3.1-400 0.6Nozzle]
+inherits =  *V-Core3_0.4Nozzle*
+bed_shape = 0x0,400x0,400x400,0x400
+max_print_height = 400
+printer_model = VC3_400
+printer_variant = 0.6
+default_print_profile = QUALITY_SPEED_0.25mm_Nozzle_0.6_VC3
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+[printer:RatRig V-Core-3.1-500 0.4Nozzle]
+inherits = *V-Core3_0.4Nozzle*
+bed_shape = 0x0,500x0,500x500,0x500
+max_print_height = 500
+printer_model = VC3_500
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VC3
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Core-3.1-500 0.5Nozzle]
+inherits = *V-Core3_0.4Nozzle*
+bed_shape = 0x0,500x0,500x500,0x500
+max_print_height = 500
+printer_model = VC3_500
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VC3
+retract_lift = 0.25
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Core-3.1-500 0.6Nozzle]
+inherits = *V-Core3_0.4Nozzle*
+bed_shape = 0x0,500x0,500x500,0x500
+max_print_height = 500
+printer_model = VC3_500
+printer_variant = 0.6
+default_print_profile = QUALITY_SPEED_0.25mm_Nozzle_0.6_VC3
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+# V-Minion ###########################################################################
+[printer:RatRig V-Minion-180 0.4Nozzle]
+inherits = *vminion*
+bed_shape = 0x0,180x0,180x180,0x180
+max_print_height = 180
+printer_model = VMINION
+printer_variant = 0.4
+default_print_profile = QUALITY_0.20mm_Nozzle_0.4_VM
+retract_lift = 0.2
+max_layer_height = 0.3
+min_layer_height = 0.06
+nozzle_diameter = 0.4
+
+[printer:RatRig V-Minion-180 0.5Nozzle]
+inherits = *vminion*
+bed_shape = 0x0,180x0,180x180,0x180
+max_print_height = 180
+printer_model = VMINION
+printer_variant = 0.5
+default_print_profile = QUALITY_0.20mm_Nozzle_0.5_VM
+retract_lift = 0.25
+max_layer_height = 0.32
+min_layer_height = 0.07
+nozzle_diameter = 0.5
+
+[printer:RatRig V-Minion-180 0.6Nozzle]
+inherits = *vminion*
+bed_shape = 0x0,180x0,180x180,0x180
+max_print_height = 180
+printer_model = VMINION
+printer_variant = 0.5
+default_print_profile = QUALITY_SPEED_0.25mm_Nozzle_0.6_VM
+retract_lift = 0.3
+max_layer_height = 0.4
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+
+
+###########################################################################################################################################################################################################
+# FILAMENTS ###############################################################################################################################################################################################
+###########################################################################################################################################################################################################
+
+[filament:PunkFil ABS @RatRig]
+filament_vendor = RatRig
+filament_type = ABS
+bed_temperature = 110
+bridge_fan_speed = 60
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.92
+fan_always_on = 1
+filament_colour = #ceff00
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 25.5
+filament_density = 1.04
+filament_retract_speed = 120
+filament_deretract_speed = 120
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_speed = 0
+filament_max_volumetric_speed = 40
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_layer_change = 1
+filament_retract_length = 0.8
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+first_layer_bed_temperature = 110
+first_layer_temperature = 260
+full_fan_speed_layer = 0
+max_fan_speed = 60
+min_fan_speed = 40
+min_print_speed = 50
+fan_below_layer_time = 3
+slowdown_below_layer_time = 2
+start_filament_gcode = ";Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.025"
+temperature = 260
+
+[filament:PunkFil PETG @RatRig]
+filament_vendor = RatRig
+filament_type = PETG
+bed_temperature = 80
+bridge_fan_speed = 40
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = ;Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.93
+fan_always_on = 1
+filament_colour = #ceff00
+filament_cost = 24.5
+filament_density = 1.27
+filament_diameter = 1.75
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_speed = 0
+filament_max_volumetric_speed = 40
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_layer_change = 1
+filament_retract_length = 0.8
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+first_layer_bed_temperature = 80
+first_layer_temperature = 235
+full_fan_speed_layer = 0
+max_fan_speed = 60
+min_fan_speed = 40
+min_print_speed = 40
+fan_below_layer_time = 6
+slowdown_below_layer_time = 4
+start_filament_gcode = ";Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.026" 
+temperature = 235
+
+[filament:PunkFil PETG CF 10 @RatRig]
+filament_vendor = RatRig
+filament_type = PETG
+bed_temperature = 80
+bridge_fan_speed = 40
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = ;Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.93
+fan_always_on = 0
+filament_colour = #323232
+filament_cost = 48
+filament_density = 1.27
+filament_diameter = 1.75
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_speed = 250
+filament_max_volumetric_speed = 20
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_layer_change = 1
+filament_retract_length = 0.8
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 1000
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+first_layer_bed_temperature = 80
+full_fan_speed_layer = 0
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 30
+fan_below_layer_time = 5
+slowdown_below_layer_time = 15
+start_filament_gcode = ";Filament gcode\nSET_PRESSURE_ADVANCE ADVANCE=0.038"
+temperature = 230
+first_layer_temperature = 230
\ No newline at end of file
diff --git a/live/RatRig/index.idx b/live/RatRig/index.idx
index ba0eff6..5518f05 100644
--- a/live/RatRig/index.idx
+++ b/live/RatRig/index.idx
@@ -1,4 +1,5 @@
 min_slic3r_version = 2.7.0
+1.1.1 Fixed bed model and texture sizes.
 1.1.0 RatRig official update, V-Core 4 added, PunkFil filament line
 1.0.3 Updated flavor. Updated start g-code.
 min_slic3r_version = 2.4.1-alpha0