Initial commit, configs from Prusa3D drivers 1.7.4

config_bundles/175mm.ini

@@ -0,0 +1,836 @@
+# generated by Slic3r 1.2.9 on Sat Oct 31 14:35:13 2015
+
+[filament:ColorFabb Brass Bronze  1.75mm]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #B79A39
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 210
+
+[filament:ColorFabb Wood Bamboo 1.75mm]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #5A4110
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 210
+
+[filament:ColorFabb XT 1.75mm]
+bed_temperature = 65
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #A36FFD
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240
+
+[filament:ColorFabb XT-CF20 1.75mm]
+bed_temperature = 65
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #000000
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 250
+
+[filament:Fillamentum ABS 1.75mm]
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_diameter = 1.75
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 255
+
+[filament:Prusa ABS 1.75mm]
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_diameter = 1.75
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 255
+
+[filament:Prusa FLEX 1.75mm]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #00CA0A
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 230
+max_fan_speed = 90
+min_fan_speed = 70
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 230
+
+[filament:Prusa HIPS 1.75mm]
+bed_temperature = 100
+bridge_fan_speed = 80
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 0.9
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FFE130
+filament_diameter = 1.75
+first_layer_bed_temperature = 100
+first_layer_temperature = 220
+max_fan_speed = 80
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 220
+
+[filament:Prusa PET 1.75mm]
+bed_temperature = 90
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #B5F5FD
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240
+
+[filament:Prusa PLA 1.75mm]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF14E2
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 210
+
+[filament:Taulman Bridge 1.75mm]
+bed_temperature = 50
+bridge_fan_speed = 40
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #DEE0E6
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 5
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 250
+
+[filament:Taulman T-Glase 1.75mm]
+bed_temperature = 79
+bridge_fan_speed = 40
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #FD0200
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 5
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240
+
+[presets]
+filament = Prusa PLA 1.75mm.ini
+print = 0.20mm NORMAL.ini
+printer = Prusa i3 1.75.ini
+
+[print:0.05mm PLA ULTRADETAIL]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 8
+bridge_acceleration = 0
+bridge_flow_ratio = 0.1
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.3
+fill_angle = 45
+fill_density = 15%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 80%
+gap_fill_speed = 0
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 4%
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 4
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.3
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 10
+travel_speed = 200
+xy_size_compensation = 0
+
+[print:0.10mm DETAIL]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 8
+bridge_acceleration = 0
+bridge_flow_ratio = 0.1
+bridge_speed = 25
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.3
+fill_angle = 45
+fill_density = 15%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.15
+first_layer_speed = 80%
+gap_fill_speed = 0
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 2%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.3
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 25
+top_solid_layers = 9
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:0.20mm FLEX]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 15
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 100%
+gap_fill_speed = 15
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.25
+infill_speed = 15
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 15
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 15
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 15
+support_material_threshold = 40
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 15
+top_solid_layers = 6
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:0.20mm NORMAL]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 70%
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 50
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_threshold = 40
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 20
+top_solid_layers = 3
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:0.25mm DRAFT]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.25
+first_layer_speed = 50%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.1
+infill_speed = 55
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.6
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_threshold = 43
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0.75
+top_solid_infill_speed = 20
+top_solid_layers = 5
+travel_speed = 100
+xy_size_compensation = 0
+
+[printer:Prusa i3 1.75]
+bed_shape = 200.01x-0.00091,200.012x0.005409,200.01x0.006186,200.01x199.994,200.012x199.995,200.01x200.001,200.011x200.017,200.01x200.016,199.998x200.01,199.991x200.01,199.99x200.01,189.99x200.01,189.99x195.01,170.01x195.01,170.01x199.99,170.01x199.99,170.01x200,170.01x200.01,170x200.01,29.99x200.01,29.99x195.01,10.01x195.01,10.01x200.01,0.009509x200.01,0.009496x200.01,0.002241x200.01,-0.010875x200.017,-0.010069x200.001,-0.011561x199.995,-0.01001x199.994,-0.01001x0.006186,-0.011561x0.005409,-0.010069x-0.00091,-0.010875x-0.016628,0.002241x-0.01007,0.009496x-0.010256,0.009509x-0.01001,10.01x-0.01001,10.01x4.98999,29.99x4.98999,29.99x-0.01001,170x-0.01001,170.01x-0.010373,170.01x-8.9e-05,170.01x0.009652,170.01x0.009658,170.01x4.98999,189.99x4.98999,189.99x-0.01001,199.99x-0.01001,199.991x-0.010256,199.998x-0.01007,200.01x-0.016188,200.011x-0.016628
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0.035
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 1.5
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = M201 X1000 Y1000 E600\nM109 S[first_layer_temperature]\nM92 E161.3\nG28\nG92 E0.0\nG1 X8.0 F2000\nG1 Y60.0 E4.0  F1000.0\nG1 Y100.0 E8.5  F1000.0\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+
+[printer:Prusa i3 1.75 FLEX]
+bed_shape = 200.01x-0.00091,200.012x0.005409,200.01x0.006186,200.01x199.994,200.012x199.995,200.01x200.001,200.011x200.017,200.01x200.016,199.998x200.01,199.991x200.01,199.99x200.01,189.99x200.01,189.99x195.01,170.01x195.01,170.01x199.99,170.01x199.99,170.01x200,170.01x200.01,170x200.01,29.99x200.01,29.99x195.01,10.01x195.01,10.01x200.01,0.009509x200.01,0.009496x200.01,0.002241x200.01,-0.010875x200.017,-0.010069x200.001,-0.011561x199.995,-0.01001x199.994,-0.01001x0.006186,-0.011561x0.005409,-0.010069x-0.00091,-0.010875x-0.016628,0.002241x-0.01007,0.009496x-0.010256,0.009509x-0.01001,10.01x-0.01001,10.01x4.98999,29.99x4.98999,29.99x-0.01001,170x-0.01001,170.01x-0.010373,170.01x-8.9e-05,170.01x0.009652,170.01x0.009658,170.01x4.98999,189.99x4.98999,189.99x-0.01001,199.99x-0.01001,199.991x-0.010256,199.998x-0.01007,200.01x-0.016188,200.011x-0.016628
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0.035
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 1.5
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = M201 X1000 Y1000 E80\nM109 S[first_layer_temperature]\nM92 E161.3\nG28\nG92 E0.0\nG1 X8.0 F2000\nG1 Y60.0 E4.0  F1000.0\nG1 Y100.0 E8.5  F1000.0\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0
+
+[settings]
+autocenter = 1
+mode = expert
+
+[simple]
+avoid_crossing_perimeters = 1
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+external_fill_pattern = rectilinear
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 2.95
+fill_angle = 45
+fill_density = 30%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_speed = 30%
+first_layer_temperature = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 10
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 60
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 0.6
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = aligned
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0  F1000.0\nG1 Y100.0 E2.3  F1000.0\nG92 Z[layer_height]\nG92 E0.0
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 0
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 100
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0

config_bundles/3mm.ini

@@ -0,0 +1,623 @@
+# generated by Slic3r 1.2.9 on Wed Sep 23 14:17:59 2015
+
+[filament:Prusa ABS 2.85mm]
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #3A80CA
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 285
+
+[filament:Prusa HIPS 2.85mm]
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #1CCA00
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 285
+
+[filament:Prusa PET 2.85mm]
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #BCBECA
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 285
+
+[filament:Prusa PLA 2.85mm]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #CA2630
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 215
+
+[filament:Prusa PP Flex 2.85mm]
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #9A40CA
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 285
+
+[presets]
+filament = Prusa ABS 2.85mm.ini
+print = 0.20mm NORMAL.ini
+printer = Prusa i3.ini
+
+[print:0.15mm DETAIL]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.15
+first_layer_speed = 80%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.02
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0.02
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.5
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 8
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:0.20mm NORMAL]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.55
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.25
+first_layer_speed = 80%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 2%
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0.02
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.5
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 45
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 6
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:0.28mm FAST]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.6
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 80%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.02
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.28
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0.02
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.5
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 4
+travel_speed = 100
+xy_size_compensation = 0
+
+[print:Flex]
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.6
+fill_angle = 45
+fill_density = 90%
+fill_pattern = line
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 80%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.1
+infill_speed = 20
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 20
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0.02
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.5
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 20
+support_material_threshold = 0
+thin_walls = 1
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 4
+travel_speed = 100
+xy_size_compensation = 0
+
+[printer:Prusa i3]
+bed_shape = 0x3,200x3,200x203,0x203
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 2.5
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 20
+start_gcode = M201 X750 Y750 E100\nG28 X0.0 Y0.0\nG28 Z\nG92 E0.0\nG1 X5.0 Y60.0 E2.0  F1000.0\nG1 X5.0 Y100.0 E4.5  F1000.0\nG92 Z0.35\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 1
+z_offset = 0
+
+[printer:Prusa i3 Flex]
+bed_shape = 0x3,200x3,200x203,0x203
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 0
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 20
+start_gcode = M201 X750 Y750 E100\nG28 X0.0 Y0.0\nG28 Z\nG92 E0.0\nG1 X5.0 Y60.0 E2.0  F1000.0\nG1 X5.0 Y100.0 E4.5  F1000.0\nG92 Z0.35\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 1
+z_offset = 0
+
+[settings]
+autocenter = 1
+mode = expert
+
+[simple]
+avoid_crossing_perimeters = 1
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+external_fill_pattern = rectilinear
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 2.95
+fill_angle = 45
+fill_density = 30%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_speed = 30%
+first_layer_temperature = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 10
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 60
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 0.6
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = aligned
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0  F1000.0\nG1 Y100.0 E2.3  F1000.0\nG92 Z[layer_height]\nG92 E0.0
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 0
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 100
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0

configurations/Slic3r settings 175/filament/ColorFabb Brass Bronze 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Sep 17 14:57:59 2015
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #B79A39
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 210

configurations/Slic3r settings 175/filament/ColorFabb Wood Bamboo 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Sep 17 15:05:54 2015
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #5A4110
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 210

configurations/Slic3r settings 175/filament/ColorFabb XT 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Sep 17 15:05:15 2015
+bed_temperature = 65
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #A36FFD
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240

configurations/Slic3r settings 175/filament/ColorFabb XT-CF20 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Sep 17 15:05:40 2015
+bed_temperature = 65
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #000000
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 250

configurations/Slic3r settings 175/filament/Fillamentum ABS 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug 13 13:27:23 2015
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_diameter = 1.75
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 255

configurations/Slic3r settings 175/filament/Prusa ABS 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug 13 12:29:07 2015
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_diameter = 1.75
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 255

configurations/Slic3r settings 175/filament/Prusa FLEX 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug 13 12:29:33 2015
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #00CA0A
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 230
+max_fan_speed = 90
+min_fan_speed = 70
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 230

configurations/Slic3r settings 175/filament/Prusa HIPS 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug 13 12:29:41 2015
+bed_temperature = 100
+bridge_fan_speed = 80
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 0.9
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FFE130
+filament_diameter = 1.75
+first_layer_bed_temperature = 100
+first_layer_temperature = 220
+max_fan_speed = 80
+min_fan_speed = 50
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 220

configurations/Slic3r settings 175/filament/Prusa PET 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug 13 16:06:33 2015
+bed_temperature = 90
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #B5F5FD
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240

configurations/Slic3r settings 175/filament/Prusa PLA 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug 13 12:30:02 2015
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF14E2
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 210

configurations/Slic3r settings 175/filament/Taulman Bridge 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Sep 17 15:02:57 2015
+bed_temperature = 50
+bridge_fan_speed = 40
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #DEE0E6
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 5
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 250

configurations/Slic3r settings 175/filament/Taulman T-Glase 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Sep 17 15:02:29 2015
+bed_temperature = 79
+bridge_fan_speed = 40
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #FD0200
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 5
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240

configurations/Slic3r settings 175/print/0.05mm PLA ULTRADETAIL.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Fri Oct 30 17:00:12 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 8
+bridge_acceleration = 0
+bridge_flow_ratio = 0.1
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.3
+fill_angle = 45
+fill_density = 15%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 80%
+gap_fill_speed = 0
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 4%
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 4
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.3
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 10
+travel_speed = 200
+xy_size_compensation = 0

configurations/Slic3r settings 175/print/0.10mm DETAIL.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Mon Oct 26 16:21:14 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 8
+bridge_acceleration = 0
+bridge_flow_ratio = 0.1
+bridge_speed = 25
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.3
+fill_angle = 45
+fill_density = 15%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.15
+first_layer_speed = 80%
+gap_fill_speed = 0
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 2%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.3
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 25
+top_solid_layers = 9
+travel_speed = 100
+xy_size_compensation = 0

configurations/Slic3r settings 175/print/0.20mm FLEX.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Sun Oct 25 14:56:03 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 15
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 100%
+gap_fill_speed = 15
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.25
+infill_speed = 15
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 15
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 15
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 15
+support_material_threshold = 40
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 15
+top_solid_layers = 6
+travel_speed = 100
+xy_size_compensation = 0

configurations/Slic3r settings 175/print/0.20mm NORMAL.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Sun Oct 25 14:56:17 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 70%
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 50
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_threshold = 40
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 20
+top_solid_layers = 3
+travel_speed = 100
+xy_size_compensation = 0

configurations/Slic3r settings 175/print/0.25mm DRAFT.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Sun Oct 25 14:56:48 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.65
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.25
+first_layer_speed = 50%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.1
+infill_speed = 55
+interface_shells = 0
+layer_height = 0.25
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.1
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.6
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_threshold = 43
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0.75
+top_solid_infill_speed = 20
+top_solid_layers = 5
+travel_speed = 100
+xy_size_compensation = 0

configurations/Slic3r settings 175/printer/Prusa i3 1.75 FLEX.ini

@@ -0,0 +1,27 @@
+# generated by Slic3r 1.2.9 on Thu Aug 13 16:08:51 2015
+bed_shape = 200.01x-0.00091,200.012x0.005409,200.01x0.006186,200.01x199.994,200.012x199.995,200.01x200.001,200.011x200.017,200.01x200.016,199.998x200.01,199.991x200.01,199.99x200.01,189.99x200.01,189.99x195.01,170.01x195.01,170.01x199.99,170.01x199.99,170.01x200,170.01x200.01,170x200.01,29.99x200.01,29.99x195.01,10.01x195.01,10.01x200.01,0.009509x200.01,0.009496x200.01,0.002241x200.01,-0.010875x200.017,-0.010069x200.001,-0.011561x199.995,-0.01001x199.994,-0.01001x0.006186,-0.011561x0.005409,-0.010069x-0.00091,-0.010875x-0.016628,0.002241x-0.01007,0.009496x-0.010256,0.009509x-0.01001,10.01x-0.01001,10.01x4.98999,29.99x4.98999,29.99x-0.01001,170x-0.01001,170.01x-0.010373,170.01x-8.9e-05,170.01x0.009652,170.01x0.009658,170.01x4.98999,189.99x4.98999,189.99x-0.01001,199.99x-0.01001,199.991x-0.010256,199.998x-0.01007,200.01x-0.016188,200.011x-0.016628
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0.035
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 1.5
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = M201 X1000 Y1000 E80\nM109 S[first_layer_temperature]\nM92 E161.3\nG28\nG92 E0.0\nG1 X8.0 F2000\nG1 Y60.0 E4.0  F1000.0\nG1 Y100.0 E8.5  F1000.0\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0

configurations/Slic3r settings 175/printer/Prusa i3 1.75.ini

@@ -0,0 +1,27 @@
+# generated by Slic3r 1.2.9 on Thu Aug 13 16:07:45 2015
+bed_shape = 200.01x-0.00091,200.012x0.005409,200.01x0.006186,200.01x199.994,200.012x199.995,200.01x200.001,200.011x200.017,200.01x200.016,199.998x200.01,199.991x200.01,199.99x200.01,189.99x200.01,189.99x195.01,170.01x195.01,170.01x199.99,170.01x199.99,170.01x200,170.01x200.01,170x200.01,29.99x200.01,29.99x195.01,10.01x195.01,10.01x200.01,0.009509x200.01,0.009496x200.01,0.002241x200.01,-0.010875x200.017,-0.010069x200.001,-0.011561x199.995,-0.01001x199.994,-0.01001x0.006186,-0.011561x0.005409,-0.010069x-0.00091,-0.010875x-0.016628,0.002241x-0.01007,0.009496x-0.010256,0.009509x-0.01001,10.01x-0.01001,10.01x4.98999,29.99x4.98999,29.99x-0.01001,170x-0.01001,170.01x-0.010373,170.01x-8.9e-05,170.01x0.009652,170.01x0.009658,170.01x4.98999,189.99x4.98999,189.99x-0.01001,199.99x-0.01001,199.991x-0.010256,199.998x-0.01007,200.01x-0.016188,200.011x-0.016628
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0.035
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 1.5
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+start_gcode = M201 X1000 Y1000 E600\nM109 S[first_layer_temperature]\nM92 E161.3\nG28\nG92 E0.0\nG1 X8.0 F2000\nG1 Y60.0 E4.0  F1000.0\nG1 Y100.0 E8.5  F1000.0\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0

configurations/Slic3r settings 175/simple.ini

@@ -0,0 +1,118 @@
+# generated by Slic3r 1.2.9 on Thu Jul 30 19:52:07 2015
+avoid_crossing_perimeters = 1
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+external_fill_pattern = rectilinear
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 2.95
+fill_angle = 45
+fill_density = 30%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_speed = 30%
+first_layer_temperature = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 10
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 60
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 0.6
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = aligned
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0  F1000.0\nG1 Y100.0 E2.3  F1000.0\nG92 Z[layer_height]\nG92 E0.0
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 0
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 100
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0

configurations/Slic3r settings 175/slic3r.ini

@@ -0,0 +1,21 @@
+# generated by Slic3r 1.2.9 on Sat Oct 31 14:01:24 2015
+autocenter = 1
+background_processing = 
+last_output_path = /Users/josefprusa/i3-antivib
+last_version_check = 1446198512
+main_frame_maximized = 
+main_frame_pos = 636,363
+main_frame_size = 1562,955
+mode = expert
+remember_output_path = 1
+version = 1.2.9
+version_check = 1
+
+[presets]
+filament = Prusa PLA 1.75mm.ini
+print = 0.20mm NORMAL.ini
+printer = Prusa i3 1.75.ini
+
+[recent]
+config_directory = /Volumes/Common/Drivers/Prusa3D_1_6_0/MAC
+skein_directory = /Users/josefprusa/Downloads

configurations/Slic3r settings MK2/filament/ColorFabb Brass Bronze 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #B79A39
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 210

configurations/Slic3r settings MK2/filament/ColorFabb HT 1.75mm.ini

@@ -0,0 +1,18 @@
+# generated by Slic3r 1.30.0-prusa3d-release_candidate_1_3 on Wed May 18 17:45:16 2016
+bed_temperature = 105
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 10
+filament_colour = #ACFDF8
+filament_diameter = 1.75
+filament_settings_id = 
+first_layer_bed_temperature = 105
+first_layer_temperature = 270
+max_fan_speed = 20
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 8
+temperature = 270

configurations/Slic3r settings MK2/filament/ColorFabb Wood Bamboo 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #5A4110
+filament_diameter = 1.75
+first_layer_bed_temperature = 50
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 20
+temperature = 210

configurations/Slic3r settings MK2/filament/ColorFabb XT 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+bed_temperature = 65
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #A36FFD
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240

configurations/Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+bed_temperature = 65
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #000000
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 250

configurations/Slic3r settings MK2/filament/ColorFabb nGen 1.75mm.ini

@@ -0,0 +1,18 @@
+# generated by Slic3r 1.30.0-prusa3d-release_candidate_1_3 on Wed May 18 15:04:37 2016
+bed_temperature = 85
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 10
+filament_colour = #ACFDF8
+filament_diameter = 1.75
+filament_settings_id = 
+first_layer_bed_temperature = 85
+first_layer_temperature = 240
+max_fan_speed = 35
+min_fan_speed = 20
+min_print_speed = 5
+slowdown_below_layer_time = 8
+temperature = 240

configurations/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini

@@ -0,0 +1,18 @@
+# generated by Slic3r 1.30.0-prusa3d-release_candidate_1_3 on Wed May 18 12:37:56 2016
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_diameter = 1.75
+filament_settings_id = 
+first_layer_bed_temperature = 100
+first_layer_temperature = 240
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240

configurations/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_diameter = 1.75
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 255

configurations/Slic3r settings MK2/filament/Prusa HIPS 1.75mm.ini

@@ -0,0 +1,18 @@
+# generated by Slic3r 1.3.0-dev on Sun May  1 17:28:52 2016
+bed_temperature = 100
+bridge_fan_speed = 50
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 0.9
+fan_always_on = 1
+fan_below_layer_time = 10
+filament_colour = #FFE130
+filament_diameter = 1.75
+filament_settings_id = 
+first_layer_bed_temperature = 100
+first_layer_temperature = 220
+max_fan_speed = 50
+min_fan_speed = 40
+min_print_speed = 5
+slowdown_below_layer_time = 5
+temperature = 220

configurations/Slic3r settings MK2/filament/Prusa PET 1.75mm.ini

@@ -0,0 +1,18 @@
+# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep  6 15:18:13 2016
+bed_temperature = 90
+bridge_fan_speed = 50
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #B5F5FD
+filament_diameter = 1.75
+filament_settings_id = 
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240

configurations/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini

@@ -0,0 +1,18 @@
+# generated by Slic3r 1.3.0-dev on Sat May  7 00:23:06 2016
+bed_temperature = 55
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF14E2
+filament_diameter = 1.75
+filament_settings_id = 
+first_layer_bed_temperature = 55
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 15
+slowdown_below_layer_time = 25
+temperature = 210

configurations/Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini

@@ -0,0 +1,18 @@
+# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep  6 15:01:11 2016
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 1
+extrusion_multiplier = 1.3
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #00CA0A
+filament_diameter = 1.75
+filament_settings_id = 
+first_layer_bed_temperature = 50
+first_layer_temperature = 230
+max_fan_speed = 90
+min_fan_speed = 70
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 230

configurations/Slic3r settings MK2/filament/Taulman Bridge 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+bed_temperature = 50
+bridge_fan_speed = 40
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #DEE0E6
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 5
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 250

configurations/Slic3r settings MK2/filament/Taulman T-Glase 1.75mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+bed_temperature = 79
+bridge_fan_speed = 40
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #FD0200
+filament_diameter = 1.75
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 5
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 15
+temperature = 240

configurations/Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini

@@ -0,0 +1,87 @@
+# generated by Slic3r 1.3.0-dev on Sun May 15 18:59:57 2016
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 600
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 5%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.3
+first_layer_height = 0.15
+first_layer_speed = 70%
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 100
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 25
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 5
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_threshold = 40
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 30
+top_solid_layers = 8
+travel_speed = 120
+xy_size_compensation = 0

configurations/Slic3r settings MK2/print/0.05mm DETAIL.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Fri Oct 30 17:00:12 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 8
+bridge_acceleration = 0
+bridge_flow_ratio = 0.1
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.3
+fill_angle = 45
+fill_density = 15%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 80%
+gap_fill_speed = 0
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 4%
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 4
+post_process = 
+raft_layers = 0
+resolution = 0
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.3
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 10
+travel_speed = 200
+xy_size_compensation = 0

configurations/Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini

@@ -0,0 +1,87 @@
+# generated by Slic3r 1.3.0-dev on Sun May 15 17:55:23 2016
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 600
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 5%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.3
+first_layer_height = 0.15
+first_layer_speed = 70%
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 100
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 25
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 5
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_threshold = 40
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 30
+top_solid_layers = 6
+travel_speed = 120
+xy_size_compensation = 0

configurations/Slic3r settings MK2/print/0.10mm DETAIL.ini

@@ -0,0 +1,87 @@
+# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep  6 15:02:22 2016
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 10%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.15
+first_layer_speed = 60%
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 100
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 4
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_threshold = 40
+thin_walls = 1
+threads = 4
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+top_solid_layers = 6
+travel_speed = 120
+xy_size_compensation = 0

configurations/Slic3r settings MK2/print/0.20mm NORMAL.ini

@@ -0,0 +1,87 @@
+# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3 on Sat Jun 18 16:05:03 2016
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 10%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.15
+first_layer_speed = 60%
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 40
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 20
+top_solid_layers = 4
+travel_speed = 120
+xy_size_compensation = 0

configurations/Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini

@@ -0,0 +1,87 @@
+# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep  6 15:17:32 2016
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.95
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 15
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 10%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.15
+first_layer_speed = 60%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 15%
+infill_speed = 15
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 15
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 15
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 15
+support_material_threshold = 40
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 15
+top_solid_layers = 6
+travel_speed = 120
+xy_size_compensation = 0

configurations/Slic3r settings MK2/print/0.35mm FAST.ini

@@ -0,0 +1,87 @@
+# generated by Slic3r 1.30.0-prusa3d-release_candidate_1_3 on Wed May 18 17:55:55 2016
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.7
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.7
+fill_angle = 45
+fill_density = 15%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.15
+first_layer_speed = 60%
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.1
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 100
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.7
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.05
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_threshold = 40
+thin_walls = 1
+threads = 4
+top_infill_extrusion_width = 0.74
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 100
+xy_size_compensation = 0

configurations/Slic3r settings MK2/printer/Original Prusa i3 MK2 ColorPrint.ini

@@ -0,0 +1,32 @@
+# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep  6 15:16:35 2016
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = 
+end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+printer_settings_id = 
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0
+retract_lift_above = 1
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+start_gcode = M115 U3.0.8 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 1
+z_offset = 0

configurations/Slic3r settings MK2/printer/Original Prusa i3 MK2 with ZHop.ini

@@ -0,0 +1,32 @@
+# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep  6 15:10:06 2016
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = 
+end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+printer_settings_id = 
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0.15
+retract_lift_above = 1
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+start_gcode = M115 U3.0.8 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 1
+z_offset = 0

configurations/Slic3r settings MK2/simple.ini

@@ -0,0 +1,118 @@
+# generated by Slic3r 1.2.9 on Tue Apr 26 16:00:19 2016
+avoid_crossing_perimeters = 1
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+external_fill_pattern = rectilinear
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 2.95
+fill_angle = 45
+fill_density = 30%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_speed = 30%
+first_layer_temperature = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 10
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 60
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 0.6
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = aligned
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0  F1000.0\nG1 Y100.0 E2.3  F1000.0\nG92 Z[layer_height]\nG92 E0.0
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 0
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 100
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0

configurations/Slic3r settings MK2/slic3r.ini

@@ -0,0 +1,21 @@
+# generated by Slic3r 1.30.0.25-prusa3d-release_candidate_1_3-win64 on Tue Sep  6 16:42:40 2016
+autocenter = 
+background_processing = 1
+last_output_path = E:\
+last_version_check = 1462534384
+main_frame_maximized = 1
+main_frame_pos = -8,-8
+main_frame_size = 1552,840
+mode = expert
+no_controller = 1
+version = 1.30.0.25-prusa3d-release_candidate_1_3-win64
+version_check = 1
+
+[presets]
+filament = Prusa PLA 1.75mm.ini
+print = 0.20mm NORMAL.ini
+printer = Original Prusa i3 MK2 ColorPrint.ini
+
+[recent]
+config_directory = C:\Users\Josef\Downloads\FLEX_Slic3r_config_bundle
+skein_directory = C:\Users\Public\Documents\Prusa3D\Objects\MK2

configurations/Slic3r settings/filament/Prusa ABS 2.85mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #3A80CA
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 285

configurations/Slic3r settings/filament/Prusa HIPS 2.85mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #1CCA00
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 285

configurations/Slic3r settings/filament/Prusa PET 2.85mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #BCBECA
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 285

configurations/Slic3r settings/filament/Prusa PLA 2.85mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #CA2630
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 215

configurations/Slic3r settings/filament/Prusa PP Flex 2.85mm.ini

@@ -0,0 +1,17 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+bed_temperature = 100
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 0
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #9A40CA
+filament_diameter = 2.9
+first_layer_bed_temperature = 0
+first_layer_temperature = 0
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 5
+slowdown_below_layer_time = 10
+temperature = 285

configurations/Slic3r settings/print/0.15mm DETAIL.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.15
+first_layer_speed = 80%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.02
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0.02
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.5
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 8
+travel_speed = 100
+xy_size_compensation = 0

configurations/Slic3r settings/print/0.20mm NORMAL.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.55
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.25
+first_layer_speed = 80%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 2%
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0.02
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.5
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 45
+thin_walls = 0
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 6
+travel_speed = 100
+xy_size_compensation = 0

configurations/Slic3r settings/print/0.28mm FAST.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 40
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.6
+fill_angle = 45
+fill_density = 22%
+fill_pattern = honeycomb
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 80%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.02
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.28
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0.02
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 40
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.5
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 0
+thin_walls = 1
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 4
+travel_speed = 100
+xy_size_compensation = 0

configurations/Slic3r settings/print/Flex.ini

@@ -0,0 +1,86 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 0
+bridge_flow_ratio = 0.65
+bridge_speed = 15
+brim_width = 0
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 1
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.6
+fill_angle = 45
+fill_density = 90%
+fill_pattern = line
+first_layer_acceleration = 0
+first_layer_extrusion_width = 0
+first_layer_height = 0.2
+first_layer_speed = 80%
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 0.1
+infill_speed = 20
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 20
+perimeters = 2
+post_process = 
+raft_layers = 0
+resolution = 0.02
+seam_position = random
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.5
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 20
+support_material_threshold = 0
+thin_walls = 1
+threads = 1
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 4
+travel_speed = 100
+xy_size_compensation = 0

configurations/Slic3r settings/printer/Prusa i3 Flex.ini

@@ -0,0 +1,27 @@
+# generated by Slic3r 1.2.9 on Thu Sep 17 15:17:16 2015
+bed_shape = 0x3,200x3,200x203,0x203
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 0
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 20
+start_gcode = M201 X750 Y750 E100\nG28 X0.0 Y0.0\nG28 Z\nG92 E0.0\nG1 X5.0 Y60.0 E2.0  F1000.0\nG1 X5.0 Y100.0 E4.5  F1000.0\nG92 Z0.35\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 1
+z_offset = 0

configurations/Slic3r settings/printer/Prusa i3.ini

@@ -0,0 +1,27 @@
+# generated by Slic3r 1.2.9 on Thu Sep 17 15:16:57 2015
+bed_shape = 0x3,200x3,200x203,0x203
+before_layer_gcode = 
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 2.5
+retract_length_toolchange = 3
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 20
+start_gcode = M201 X750 Y750 E100\nG28 X0.0 Y0.0\nG28 Z\nG92 E0.0\nG1 X5.0 Y60.0 E2.0  F1000.0\nG1 X5.0 Y100.0 E4.5  F1000.0\nG92 Z0.35\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+vibration_limit = 0
+wipe = 1
+z_offset = 0

configurations/Slic3r settings/simple.ini

@@ -0,0 +1,118 @@
+# generated by Slic3r 1.2.9 on Thu Aug  6 15:37:48 2015
+avoid_crossing_perimeters = 1
+bed_shape = 0x0,200x0,200x200,0x200
+bed_temperature = 0
+bottom_solid_layers = 3
+bridge_acceleration = 0
+bridge_fan_speed = 100
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_width = 0
+complete_objects = 0
+cooling = 1
+default_acceleration = 0
+disable_fan_first_layers = 1
+dont_support_bridges = 1
+duplicate_distance = 6
+end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+external_fill_pattern = rectilinear
+external_perimeter_speed = 70%
+external_perimeters_first = 0
+extra_perimeters = 1
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extruder_offset = 0x0
+extrusion_axis = E
+extrusion_multiplier = 1
+extrusion_width = 0
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_diameter = 2.95
+fill_angle = 45
+fill_density = 30%
+fill_pattern = rectilinear
+first_layer_acceleration = 0
+first_layer_bed_temperature = 0
+first_layer_extrusion_width = 200%
+first_layer_height = 0.4
+first_layer_speed = 30%
+first_layer_temperature = 0
+gap_fill_speed = 20
+gcode_arcs = 0
+gcode_comments = 0
+gcode_flavor = reprap
+infill_acceleration = 0
+infill_every_layers = 10
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_speed = 60
+interface_shells = 0
+layer_gcode = 
+layer_height = 0.3
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+min_skirt_length = 0
+notes = 
+nozzle_diameter = 0.4
+only_retract_when_crossing_perimeters = 1
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+raft_layers = 0
+resolution = 0
+retract_before_travel = 2
+retract_layer_change = 1
+retract_length = 0.6
+retract_length_toolchange = 10
+retract_lift = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 30
+seam_position = aligned
+skirt_distance = 6
+skirt_height = 1
+skirts = 1
+slowdown_below_layer_time = 30
+small_perimeter_speed = 30
+solid_infill_below_area = 70
+solid_infill_every_layers = 0
+solid_infill_extrusion_width = 0
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0  F1000.0\nG1 Y100.0 E2.3  F1000.0\nG92 Z[layer_height]\nG92 E0.0
+support_material = 0
+support_material_angle = 0
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = pillars
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_threshold = 0
+temperature = 0
+thin_walls = 1
+threads = 2
+toolchange_gcode = 
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 50
+top_solid_layers = 3
+travel_speed = 100
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+vibration_limit = 0
+wipe = 0
+z_offset = 0

configurations/Slic3r settings/slic3r.ini

@@ -0,0 +1,20 @@
+# generated by Slic3r 1.2.9 on Wed Sep 23 14:17:59 2015
+autocenter = 1
+background_processing = 1
+last_output_path = /Volumes/NO NAME
+last_version_check = 1443010655
+main_frame_maximized = 
+main_frame_pos = 128,23
+main_frame_size = 1093,667
+mode = expert
+version = 1.2.9
+version_check = 1
+
+[presets]
+filament = Prusa ABS 2.85mm.ini
+print = 0.20mm NORMAL.ini
+printer = Prusa i3.ini
+
+[recent]
+config_directory = /Volumes/Common/Drivers/Prusa3D_1_6_0/MAC
+skein_directory = /Users/josefprusa/Downloads