Prepare data for the initial updating release of Slic3r (1.40.0)

old/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Brass Bronze 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:59:23
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]>0.35
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.3
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #804040
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 210

old/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb HT 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:49:09
+bed_temperature = 105
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 10
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 105
+first_layer_temperature = 270
+max_fan_speed = 20
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 270

old/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb PLA-PHA.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:49:28
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 15
+filament_notes = "List of materials tested with standard PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 210

old/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Woodfil 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:59:34
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]>0.35
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.2
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #804040
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 200
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 200

old/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:49:53
+bed_temperature = 90
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 90
+first_layer_temperature = 260
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 270

old/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT-CF20 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:05
+bed_temperature = 90
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.2
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #804040
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 1
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
+first_layer_bed_temperature = 90
+first_layer_temperature = 260
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 260

old/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:19
+bed_temperature = 85
+bridge_fan_speed = 40
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 10
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = NGEN
+first_layer_bed_temperature = 85
+first_layer_temperature = 240
+max_fan_speed = 35
+min_fan_speed = 20
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 240

old/Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen flex.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:31
+bed_temperature = 85
+bridge_fan_speed = 40
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 10
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 5
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = FLEX
+first_layer_bed_temperature = 85
+first_layer_temperature = 260
+max_fan_speed = 35
+min_fan_speed = 20
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 260

old/Slic3r settings MK2S MK2MM and MK3/filament/E3D Edge.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:45
+bed_temperature = 90
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = "List of manufacturers tested with standard PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
+first_layer_bed_temperature = 85
+first_layer_temperature = 230
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 240

old/Slic3r settings MK2S MK2MM and MK3/filament/E3D PC-ABS 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:54
+bed_temperature = 100
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 13
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 100
+first_layer_temperature = 270
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 270

old/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ABS 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:07
+bed_temperature = 100
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 13
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 240
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 240

old/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ASA 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:19
+bed_temperature = 100
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 13
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 100
+first_layer_temperature = 265
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 265

old/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum CPE HG100 HM100.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:33
+bed_temperature = 90
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = "CPE HG100 , CPE HM100"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
+first_layer_bed_temperature = 90
+first_layer_temperature = 260
+max_fan_speed = 80
+min_fan_speed = 80
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 260

old/Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum Timberfil.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 16:00:00
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]>0.35
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.2
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #804040
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 190
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 190

old/Slic3r settings MK2S MK2MM and MK3/filament/Generic ABS 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:54
+bed_temperature = 100
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 13
+filament_notes = "List of materials tested with standard ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 255

old/Slic3r settings MK2S MK2MM and MK3/filament/Generic PET 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:04
+bed_temperature = 90
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = "List of manufacturers tested with standard PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
+first_layer_bed_temperature = 85
+first_layer_temperature = 230
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 240

old/Slic3r settings MK2S MK2MM and MK3/filament/Generic PLA 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:16
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 15
+filament_notes = "List of materials tested with standard PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 210

old/Slic3r settings MK2S MK2MM and MK3/filament/Polymaker PC-Max.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:26
+bed_temperature = 120
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 13
+filament_notes = "List of materials tested with standard ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = ABS
+first_layer_bed_temperature = 120
+first_layer_temperature = 270
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 270

old/Slic3r settings MK2S MK2MM and MK3/filament/Primavalue PVA.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:38
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #FFFFD7
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = "List of materials tested with standard PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
+filament_settings_id = 
+filament_soluble = 1
+filament_type = PVA
+first_layer_bed_temperature = 60
+first_layer_temperature = 195
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 195

old/Slic3r settings MK2S MK2MM and MK3/filament/Prusa ABS 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:48
+bed_temperature = 100
+bridge_fan_speed = 30
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 13
+filament_notes = "List of materials tested with standard ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 255

old/Slic3r settings MK2S MK2MM and MK3/filament/Prusa HIPS 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:59
+bed_temperature = 100
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 0.9
+fan_always_on = 1
+fan_below_layer_time = 10
+filament_colour = #FFFFD7
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 13
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 1
+filament_type = HIPS
+first_layer_bed_temperature = 100
+first_layer_temperature = 220
+max_fan_speed = 20
+min_fan_speed = 20
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 220

old/Slic3r settings MK2S MK2MM and MK3/filament/Prusa PET 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:08
+bed_temperature = 90
+bridge_fan_speed = 50
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = "List of manufacturers tested with standard PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
+first_layer_bed_temperature = 85
+first_layer_temperature = 230
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
+temperature = 240

old/Slic3r settings MK2S MK2MM and MK3/filament/Prusa PLA 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:18
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 15
+filament_notes = "List of materials tested with standard PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 210

old/Slic3r settings MK2S MK2MM and MK3/filament/SemiFlex or Flexfill 98A.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 16:00:18
+bed_temperature = 50
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
+cooling = 0
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1.2
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #00CA0A
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 2.5
+filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = FLEX
+first_layer_bed_temperature = 50
+first_layer_temperature = 220
+max_fan_speed = 90
+min_fan_speed = 70
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 230

old/Slic3r settings MK2S MK2MM and MK3/filament/Taulman Bridge 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:38
+bed_temperature = 50
+bridge_fan_speed = 40
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #DEE0E6
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 5
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 250

old/Slic3r settings MK2S MK2MM and MK3/filament/Taulman T-Glase 1.75mm.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:47
+bed_temperature = 90
+bridge_fan_speed = 40
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = ""
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 5
+min_fan_speed = 0
+min_print_speed = 5
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
+temperature = 240

old/Slic3r settings MK2S MK2MM and MK3/filament/Verbatim BVOH.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:58
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 0
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #FFFFD7
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 10
+filament_notes = "List of materials tested with standard PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_settings_id = 
+filament_soluble = 1
+filament_type = PLA
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 210

old/Slic3r settings MK2S MK2MM and MK3/filament/Verbatim PP.ini

@@ -0,0 +1,28 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:54:08
+bed_temperature = 100
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+cooling = 1
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #DEE0E6
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 5
+filament_notes = "List of materials tested with standard PLA print settings for MK2:\n\nEsun PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nEUMAKERS PLA"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 100
+first_layer_temperature = 220
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
+temperature = 220

old/Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL 0.25 nozzle.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:35:08
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 10
+bridge_acceleration = 300
+bridge_angle = 0
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.28
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.3
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 800
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 20
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 300
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 20
+perimeters = 4
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 10
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 0
+support_material_interface_spacing = 0.15
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 20
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 150%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0
+top_solid_infill_speed = 20
+top_solid_layers = 15
+travel_speed = 200
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:29:11
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 10
+bridge_acceleration = 300
+bridge_angle = 0
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 25%
+fill_pattern = cubic
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 800
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 30
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 80
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 300
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.3
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 30
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 20
+top_solid_layers = 15
+travel_speed = 180
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:54:48
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 10
+bridge_acceleration = 300
+bridge_angle = 0
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
+complete_objects = 0
+default_acceleration = 500
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 25%
+fill_pattern = cubic
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 20
+gcode_comments = 0
+infill_acceleration = 800
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.5
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 30
+interface_shells = 0
+layer_height = 0.05
+max_print_speed = 80
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 300
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 30
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 30
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.3
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 30
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 20
+top_solid_layers = 15
+travel_speed = 180
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL 0.25 nozzle.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:37:04
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 15%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1600
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 25
+perimeters = 4
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 10
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.18
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 0
+support_material_interface_spacing = 0.15
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 150%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 30
+top_solid_layers = 9
+travel_speed = 120
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:29:38
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 3500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 250
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 200
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 250
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:55:16
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.1
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 50
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 40
+top_solid_layers = 9
+travel_speed = 120
+wipe_tower = 0
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.15mm 100mms Linear Advance.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:57:50
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 50
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 100
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 30
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 100
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 70
+top_solid_layers = 5
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.25 nozzle.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:38:12
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 600
+bridge_angle = 0
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.25
+external_perimeter_speed = 20
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.25
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.25
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 1600
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.25
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 40
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 600
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.25
+perimeter_speed = 25
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 10
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.25
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.2
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 0
+support_material_interface_spacing = 0.15
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 35
+support_material_with_sheath = 0
+support_material_xy_spacing = 150%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.25
+top_solid_infill_speed = 30
+top_solid_layers = 7
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.6 nozzle.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:38:26
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.75
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 40
+top_solid_layers = 7
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:29:48
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 3500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 250
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 200
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 250
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE FULL.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:38:56
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 0
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0
+support_material_enforce_layers = 0
+support_material_extruder = 4
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 4
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.1
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 1
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+top_solid_layers = 7
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 20
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE INTERFACE.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:39:18
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 0
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 4
+support_material_interface_layers = 3
+support_material_interface_spacing = 0.1
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 0
+support_material_xy_spacing = 120%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+top_solid_layers = 7
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 20
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:37:56
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 5
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 50
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 40
+top_solid_layers = 7
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.20mm 100mms Linear Advance.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:39:43
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 50
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 100
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 30
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 100
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 60
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 70
+top_solid_layers = 5
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL 0.6 nozzle.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:40:18
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.75
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 40
+top_solid_layers = 5
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:30:01
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 3500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 250
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 200
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 50
+top_solid_layers = 5
+travel_speed = 250
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE FULL.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:57:25
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 0
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0
+support_material_enforce_layers = 0
+support_material_extruder = 4
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 4
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.1
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 1
+support_material_xy_spacing = 120%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+top_solid_layers = 5
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 20
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE INTERFACE.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:40:49
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 0
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.45
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 4
+support_material_interface_layers = 3
+support_material_interface_spacing = 0.1
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 0
+support_material_xy_spacing = 120%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+top_solid_layers = 5
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 20
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:39:58
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 40
+top_solid_layers = 5
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST 0.6 nozzle.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:27
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.61
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.75
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 50
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.6
+top_solid_infill_speed = 50
+top_solid_layers = 9
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST MK3.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:30:18
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 4
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 30
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 3500
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 200
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 250
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 200
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 250
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol full 0.6 nozzle.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:51
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.75
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 0
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0
+support_material_enforce_layers = 0
+support_material_extruder = 4
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 4
+support_material_interface_layers = 3
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 0
+support_material_xy_spacing = 120%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.57
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 20
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol int 0.6 nozzle.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:58
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 30
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.67
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.65
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.75
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = Set your solluble extruder in Multiple Extruders >  Support material/raft interface extruder
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 1
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.65
+perimeter_speed = 40
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 0
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.65
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 1
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.55
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 4
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 0
+support_material_xy_spacing = 150%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.57
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 20
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST.ini

@@ -0,0 +1,105 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:11
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 3
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.6
+external_perimeter_speed = 40
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = cubic
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 30
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.7
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.35
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.43
+perimeter_speed = 50
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 3
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.7
+solid_infill_speed = 60
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.43
+top_solid_infill_speed = 50
+top_solid_layers = 4
+travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
+xy_size_compensation = 0

old/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.25 nozzle.ini

@@ -0,0 +1,39 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:46:48
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.1
+min_layer_height = 0.05
+nozzle_diameter = 0.25
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
+printer_settings_id = 
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 3
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 0
+wipe = 1
+z_offset = 0

old/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.6 nozzle.ini

@@ -0,0 +1,39 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:46:53
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.35
+min_layer_height = 0.1
+nozzle_diameter = 0.6
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
+printer_settings_id = 
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0

old/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini

@@ -0,0 +1,39 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-20 at 11:34:25
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 50
+end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
+extruder_colour = #FFAA55
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.6
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
+printer_settings_id = 
+retract_before_travel = 3
+retract_before_wipe = 60%
+retract_layer_change = 0
+retract_length = 4
+retract_length_toolchange = 6
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 80
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 1
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0

old/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode.ini

@@ -0,0 +1,39 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-20 at 11:34:34
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 50
+end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
+extruder_colour = #FFAA55
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
+printer_settings_id = 
+retract_before_travel = 3
+retract_before_wipe = 60%
+retract_layer_change = 0
+retract_length = 4
+retract_length_toolchange = 6
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 80
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 1
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT?\nM104 S[first_layer_temperature]\nM140 S[first_layer_bed_temperature]\nM109 S[first_layer_temperature]\nM190 S[first_layer_bed_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0

old/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini

@@ -0,0 +1,39 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:47:43
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 50,50,50,50
+end_gcode = {if not has_wipe_tower}\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n
+extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
+extruder_offset = 0x0,0x0,0x0,0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25,0.25,0.25,0.25
+min_layer_height = 0.07,0.07,0.07,0.07
+nozzle_diameter = 0.6,0.6,0.6,0.6
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
+printer_settings_id = 
+retract_before_travel = 3,3,3,3
+retract_before_wipe = 60%,60%,60%,60%
+retract_layer_change = 0,0,0,0
+retract_length = 4,4,4,4
+retract_length_toolchange = 4,4,4,4
+retract_lift = 0.6,0.6,0.6,0.6
+retract_lift_above = 0,0,0,0
+retract_lift_below = 199,199,199,199
+retract_restart_extra = 0,0,0,0
+retract_restart_extra_toolchange = 0,0,0,0
+retract_speed = 80,80,80,80
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 1
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 0
+wipe = 1,1,1,1
+z_offset = 0

old/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial.ini

@@ -0,0 +1,39 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:47:34
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 50,50,50,50
+end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
+extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
+extruder_offset = 0x0,0x0,0x0,0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25,0.25,0.25,0.25
+min_layer_height = 0.07,0.07,0.07,0.07
+nozzle_diameter = 0.4,0.4,0.4,0.4
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
+printer_settings_id = 
+retract_before_travel = 3,3,3,3
+retract_before_wipe = 60%,60%,60%,60%
+retract_layer_change = 0,0,0,0
+retract_length = 4,4,4,4
+retract_length_toolchange = 4,4,4,4
+retract_lift = 0.6,0.6,0.6,0.6
+retract_lift_above = 0,0,0,0
+retract_lift_below = 199,199,199,199
+retract_restart_extra = 0,0,0,0
+retract_restart_extra_toolchange = 0,0,0,0
+retract_speed = 80,80,80,80
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 1
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 0
+wipe = 1,1,1,1
+z_offset = 0

old/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2.ini

@@ -0,0 +1,39 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:32:13
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
+printer_settings_id = 
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0

old/Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK3.ini

@@ -0,0 +1,38 @@
+# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:26:13
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+between_objects_gcode = 
+deretract_speed = 0
+end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 209
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0

old/Slic3r settings MK2S MK2MM and MK3/slic3r.ini

@@ -0,0 +1,24 @@
+# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 08:53:50
+autocenter = 0
+background_processing = 0
+last_output_path = C:\Users\Jindřich Beneš\Desktop
+main_frame_maximized = 1
+main_frame_pos = -8,-8
+main_frame_size = 1936,1066
+mode = expert
+no_controller = 1
+no_defaults = 1
+object_settings_pos = 68,45
+object_settings_size = 1309,822
+show_incompatible_presets = 1
+version = 1.38.0.35-prusa3d-win64
+version_check = 1
+
+[presets]
+filament = Prusa PLA 1.75mm
+print = 0.15mm 100mms Linear Advance
+printer = Original Prusa i3 MK2
+
+[recent]
+config_directory = C:\Users\Jindřich Beneš\Desktop
+skein_directory = C:\Users\Jindřich Beneš\Desktop