diff --git a/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini b/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini
index e5bde07..2bc1bfb 100644
--- a/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
+# generated by Slic3r 1.35.0.23-prusa3d-win64 on Mon Jun  5 15:23:45 2017
 bed_temperature = 100
 bridge_fan_speed = 30
 cooling = 0
@@ -7,8 +7,14 @@ extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 20
 filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
 filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = ""
 filament_settings_id = 
+filament_soluble = 0
+filament_type = ABS
 first_layer_bed_temperature = 100
 first_layer_temperature = 240
 max_fan_speed = 30
diff --git a/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini b/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini
index fdf9a13..5921a37 100644
--- a/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:02 2017
+# generated by Slic3r 1.35.0.13-prusa3d-win64 on Tue May 30 16:54:34 2017
 bed_temperature = 100
 bridge_fan_speed = 30
 cooling = 0
diff --git a/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini b/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini
index f6963ac..baef9d4 100644
--- a/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini	
+++ b/Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:12:50 2017
+# generated by Slic3r 1.35.0.13-prusa3d-win64 on Tue May 30 16:54:39 2017
 bed_temperature = 55
 bridge_fan_speed = 100
 cooling = 1
diff --git a/Slic3r settings MK2/print/0.15mm OPTIMAL.ini b/Slic3r settings MK2/print/0.15mm OPTIMAL.ini
index 968d3b1..55915fe 100644
--- a/Slic3r settings MK2/print/0.15mm OPTIMAL.ini	
+++ b/Slic3r settings MK2/print/0.15mm OPTIMAL.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
+# generated by Slic3r 1.35.0.13-prusa3d-win64 on Tue May 30 15:25:55 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 7
 bridge_acceleration = 1000
@@ -93,4 +93,9 @@ top_infill_extrusion_width = 0.45
 top_solid_infill_speed = 30
 top_solid_layers = 9
 travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
 xy_size_compensation = 0
diff --git a/Slic3r settings MK2/print/0.20mm MM Soluble.ini b/Slic3r settings MK2/print/0.20mm MM Soluble.ini
index 7257d4e..c8bcee9 100644
--- a/Slic3r settings MK2/print/0.20mm MM Soluble.ini	
+++ b/Slic3r settings MK2/print/0.20mm MM Soluble.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:10:35 2017
+# generated by Slic3r 1.35.0.13-prusa3d-win64 on Tue May 30 15:26:17 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
 bridge_acceleration = 1000
@@ -93,7 +93,7 @@ top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 30
 top_solid_layers = 6
 travel_speed = 120
-wipe_tower = 0
+wipe_tower = 1
 wipe_tower_per_color_wipe = 15
 wipe_tower_width = 60
 wipe_tower_x = 180
diff --git a/Slic3r settings MK2/print/0.20mm NORMAL.ini b/Slic3r settings MK2/print/0.20mm NORMAL.ini
index 08de4f3..7b6643f 100644
--- a/Slic3r settings MK2/print/0.20mm NORMAL.ini	
+++ b/Slic3r settings MK2/print/0.20mm NORMAL.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
+# generated by Slic3r 1.35.0.13-prusa3d-win64 on Thu Jun  1 08:32:28 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
 bridge_acceleration = 1000
@@ -93,4 +93,9 @@ top_infill_extrusion_width = 0.4
 top_solid_infill_speed = 30
 top_solid_layers = 6
 travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
 xy_size_compensation = 0
diff --git a/Slic3r settings MK2/print/0.35mm FAST.ini b/Slic3r settings MK2/print/0.35mm FAST.ini
index 3d891d5..a12dbe2 100644
--- a/Slic3r settings MK2/print/0.35mm FAST.ini	
+++ b/Slic3r settings MK2/print/0.35mm FAST.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
+# generated by Slic3r 1.35.0.13-prusa3d-win64 on Tue May 30 15:26:46 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 1000
@@ -93,4 +93,9 @@ top_infill_extrusion_width = 0.43
 top_solid_infill_speed = 50
 top_solid_layers = 4
 travel_speed = 120
+wipe_tower = 1
+wipe_tower_per_color_wipe = 15
+wipe_tower_width = 60
+wipe_tower_x = 180
+wipe_tower_y = 140
 xy_size_compensation = 0
diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini b/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini
index b32f2bf..fb2a698 100644
--- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini	
+++ b/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini	
@@ -1,7 +1,9 @@
-# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 16:59:08 2017
+# generated by Slic3r 1.35.0.22-prusa3d-win64 on Thu Jun  1 11:02:50 2017
 bed_shape = 0x0,250x0,250x210,0x210
 before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+deretract_speed = 0,0,0,0
 end_gcode = M107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
+extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
 extruder_offset = 0x0,0x0,0x0,0x0
 gcode_flavor = reprap
 layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
@@ -13,6 +15,7 @@ octoprint_host =
 printer_notes = 
 printer_settings_id = 
 retract_before_travel = 3,3,3,3
+retract_before_wipe = 0%,0%,0%,0%
 retract_layer_change = 0,0,0,0
 retract_length = 4,4,4,4
 retract_length_toolchange = 4,4,4,4
@@ -24,8 +27,9 @@ retract_restart_extra_toolchange = 0,0,0,0
 retract_speed = 50,50,50,50
 serial_port = 
 serial_speed = 250000
-single_extruder_multi_material = 0
-start_gcode = ; Start G-Code sequence START\nT99\nM115 U3.0.12-RC1 ; tell printer latest fw version\nM109 S[first_layer_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
+set_and_wait_temperatures = 0
+single_extruder_multi_material = 1
+start_gcode = ; Start G-Code sequence START\nT[initial_tool]\nM115 U3.0.12-RC1 ; tell printer latest fw version\nM109 S[first_layer_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
 toolchange_gcode = 
 use_firmware_retraction = 0
 use_relative_e_distances = 1
diff --git a/Slic3r settings MK2/slic3r.ini b/Slic3r settings MK2/slic3r.ini
index a71ef53..29d097d 100644
--- a/Slic3r settings MK2/slic3r.ini	
+++ b/Slic3r settings MK2/slic3r.ini	
@@ -1,14 +1,14 @@
-# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:14:16 2017
+# generated by Slic3r 1.35.0.23-prusa3d-win64 on Mon Jun  5 16:54:12 2017
 autocenter = 
 background_processing = 0
-last_output_path = C:\Users\Jindřich Beneš\Desktop\3d print\MM
+last_output_path = C:\Users\Jindřich Beneš\Desktop\runes
 main_frame_maximized = 
-main_frame_pos = 114,68
-main_frame_size = 972,574
+main_frame_pos = 105,59
+main_frame_size = 1056,699
 mode = expert
 no_controller = 1
 no_defaults = 1
-version = 1.34.1.39-prusa3d-win64
+version = 1.35.0.23-prusa3d-win64
 version_check = 1
 
 [presets]
@@ -16,9 +16,9 @@ filament = Prusa PLA 1.75mm.ini
 filament_1 = Prusa PLA 1.75mm
 filament_2 = Prusa PLA 1.75mm
 filament_3 = Prusa PLA 1.75mm
-print = 0.15mm OPTIMAL.ini
+print = 0.20mm NORMAL.ini
 printer = Original Prusa i3 MK2 with ZHop.ini
 
 [recent]
 config_directory = C:\Users\Jindřich Beneš\Desktop
-skein_directory = C:\Users\Jindřich Beneš\Desktop
+skein_directory = C:\Users\Jindřich Beneš\Desktop\3d print
diff --git a/Slic3r settings MK2MM/print/0.15mm OPTIMAL.ini b/Slic3r settings MK2MM/print/0.15mm OPTIMAL.ini
index 49e4546..25d1622 100644
--- a/Slic3r settings MK2MM/print/0.15mm OPTIMAL.ini	
+++ b/Slic3r settings MK2MM/print/0.15mm OPTIMAL.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue May 30 09:30:09 2017
+# generated by Slic3r 1.34.1.24-prusa3d-win64 on Mon Jun  5 15:32:09 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 7
 bridge_acceleration = 1000
@@ -68,10 +68,10 @@ solid_infill_extrusion_width = 0.45
 solid_infill_speed = 40
 spiral_vase = 0
 standby_temperature_delta = -5
-support_material = 0
+support_material = 1
 support_material_angle = 0
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.35
@@ -86,7 +86,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 0
 support_material_threshold = 35
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 120%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.45
diff --git a/Slic3r settings MK2MM/print/0.20mm NORMAL.ini b/Slic3r settings MK2MM/print/0.20mm NORMAL.ini
index 4e007e8..04722d5 100644
--- a/Slic3r settings MK2MM/print/0.20mm NORMAL.ini	
+++ b/Slic3r settings MK2MM/print/0.20mm NORMAL.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue May 30 09:30:16 2017
+# generated by Slic3r 1.34.1.24-prusa3d-win64 on Thu Jun  1 08:32:59 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 5
 bridge_acceleration = 1000
@@ -71,7 +71,7 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.35
@@ -86,7 +86,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 0
 support_material_threshold = 35
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 120%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.4
diff --git a/Slic3r settings MK2MM/print/0.35mm FAST.ini b/Slic3r settings MK2MM/print/0.35mm FAST.ini
index 3d891d5..f757256 100644
--- a/Slic3r settings MK2MM/print/0.35mm FAST.ini	
+++ b/Slic3r settings MK2MM/print/0.35mm FAST.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
+# generated by Slic3r 1.34.1.24-prusa3d-win64 on Mon Jun  5 15:32:24 2017
 avoid_crossing_perimeters = 0
 bottom_solid_layers = 3
 bridge_acceleration = 1000
@@ -71,7 +71,7 @@ standby_temperature_delta = -5
 support_material = 0
 support_material_angle = 0
 support_material_buildplate_only = 0
-support_material_contact_distance = 0.15
+support_material_contact_distance = 0.2
 support_material_enforce_layers = 0
 support_material_extruder = 1
 support_material_extrusion_width = 0.35
@@ -86,7 +86,7 @@ support_material_speed = 50
 support_material_synchronize_layers = 0
 support_material_threshold = 35
 support_material_with_sheath = 0
-support_material_xy_spacing = 60%
+support_material_xy_spacing = 120%
 thin_walls = 0
 threads = 4
 top_infill_extrusion_width = 0.43
diff --git a/Slic3r settings MK2MM/slic3r.ini b/Slic3r settings MK2MM/slic3r.ini
index 77ae491..ea897cc 100644
--- a/Slic3r settings MK2MM/slic3r.ini	
+++ b/Slic3r settings MK2MM/slic3r.ini	
@@ -1,10 +1,10 @@
-# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue May 30 12:54:04 2017
+# generated by Slic3r 1.34.1.24-prusa3d-win64 on Mon Jun  5 16:53:51 2017
 autocenter = 
 background_processing = 0
-last_output_path = C:\Users\Jindřich Beneš\Desktop
-main_frame_maximized = 1
-main_frame_pos = -8,-8
-main_frame_size = 1936,1066
+last_output_path = C:\Users\Jindřich Beneš\Desktop\dual extrusion konkurence
+main_frame_maximized = 
+main_frame_pos = 300,61
+main_frame_size = 882,703
 mode = expert
 no_controller = 1
 no_defaults = 1
@@ -16,9 +16,9 @@ filament = Prusa PLA 1.75mm.ini
 filament_1 = Prusa PLA 1.75mm
 filament_2 = Prusa PLA 1.75mm
 filament_3 = Prusa PLA 1.75mm
-print = 0.20mm MM Soluble.ini
-printer = Original Prusa i3 MK2 MM Single Ext..ini
+print = 0.20mm NORMAL.ini
+printer = Original Prusa i3 MK2 MultiMaterial.ini
 
 [recent]
 config_directory = C:\Users\Jindřich Beneš\Desktop
-skein_directory = C:\Users\Jindřich Beneš\Desktop
+skein_directory = C:\Users\Jindřich Beneš\Desktop\dual extrusion konkurence