diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini b/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini
deleted file mode 100644
index fb2a698..0000000
--- a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MultiMaterial.ini	
+++ /dev/null
@@ -1,39 +0,0 @@
-# generated by Slic3r 1.35.0.22-prusa3d-win64 on Thu Jun  1 11:02:50 2017
-bed_shape = 0x0,250x0,250x210,0x210
-before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
-deretract_speed = 0,0,0,0
-end_gcode = M107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
-extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
-extruder_offset = 0x0,0x0,0x0,0x0
-gcode_flavor = reprap
-layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
-max_layer_height = 0.25,0.25,0.25,0.25
-min_layer_height = 0.07,0.07,0.07,0.07
-nozzle_diameter = 0.4,0.4,0.4,0.4
-octoprint_apikey = 
-octoprint_host = 
-printer_notes = 
-printer_settings_id = 
-retract_before_travel = 3,3,3,3
-retract_before_wipe = 0%,0%,0%,0%
-retract_layer_change = 0,0,0,0
-retract_length = 4,4,4,4
-retract_length_toolchange = 4,4,4,4
-retract_lift = 0.5,0.5,0.5,0.5
-retract_lift_above = 0,0,0,0
-retract_lift_below = 199,199,199,199
-retract_restart_extra = 0,0,0,0
-retract_restart_extra_toolchange = 0,0,0,0
-retract_speed = 50,50,50,50
-serial_port = 
-serial_speed = 250000
-set_and_wait_temperatures = 0
-single_extruder_multi_material = 1
-start_gcode = ; Start G-Code sequence START\nT[initial_tool]\nM115 U3.0.12-RC1 ; tell printer latest fw version\nM109 S[first_layer_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-variable_layer_height = 0
-wipe = 1,1,1,1
-z_offset = 0