diff --git a/Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini b/Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini
new file mode 100644
index 0000000..7227d87
--- /dev/null
+++ b/Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini	
@@ -0,0 +1,38 @@
+# generated by Slic3r 1.35.5-prusa3d-win64 on Thu Jul  6 12:55:27 2017
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+deretract_speed = 0
+end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7  \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3  \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
+extruder_colour = #FFAA55
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.6
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 3
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 4
+retract_length_toolchange = 6
+retract_lift = 0.5
+retract_lift_above = 0
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 80
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 1
+start_gcode = M115 U3.0.12 ; tell printer latest fw version\n; Start G-Code sequence START\nT?\nM109 S[first_layer_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 0
+wipe = 1
+z_offset = 0