diff --git a/live/HartSmartProducts/0.1.1.ini b/live/HartSmartProducts/0.1.1.ini
index 031e8f5..140e383 100644
--- a/live/HartSmartProducts/0.1.1.ini
+++ b/live/HartSmartProducts/0.1.1.ini
@@ -229,7 +229,7 @@ output_filename_format = {input_filename_base}_{nozzle_diameter[0]}n_{filament_t
 threads = 12
 
 [print:*dual*]
-gcode_substitutions = "M220 S100";;;"Remove feedrate override resets";"G10 S(\\d+) P(\\d+)";"M568 P${2} S${1}";r;"RRF now uses M568 instead of G10";"M140 S(\d+) ; set bed temperature";;r;"Fix incorrect 2nd layer bed temp"
+gcode_substitutions = "M220 S100";;;"Remove feedrate override resets";"G10 S(\\d+) P(\\d+)";"M568 P${2} S${1}";r;"RRF now uses M568 instead of G10";"M140 S(\\d+) ; (.+)";;r;"Fix incorrect 2nd layer bed temp"
 
 [print:*duplicator*]
 gcode_substitutions = "M220 S100";;;"Remove feedrate override resets";"G10 S(\\d+) P(\\d+)";"M568 P2 S${1}";r;"RRF now uses M568 instead of G10"
@@ -322,8 +322,8 @@ support_tree_tip_diameter = 1.8
 support_tree_top_rate = 30%
 
 [print:*0.4n Support*]
-first_layer_extrusion_width = 0.42
-support_material_extrusion_width = 0.38
+first_layer_extrusion_width = 0.45
+support_material_extrusion_width = 0.42
 support_material_spacing = 2
 support_material_interface_spacing = 0.2
 support_material_contact_distance = 0.20
@@ -878,7 +878,7 @@ filament_type = BVOH
 temperature = 220
 bed_temperature = 60
 first_layer_temperature = 215
-first_layer_bed_temperature = 0
+first_layer_bed_temperature = 60
 idle_temperature = 120
 filament_max_volumetric_speed = 15
 extrusion_multiplier = 0.90
@@ -901,7 +901,7 @@ filament_type = PVA
 temperature = 220
 bed_temperature = 60
 first_layer_temperature = 215
-first_layer_bed_temperature = 0
+first_layer_bed_temperature = 60
 idle_temperature = 120
 filament_max_volumetric_speed = 15
 extrusion_multiplier = 0.90
@@ -1063,11 +1063,10 @@ start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder]
 inherits = *PVA*; *Polymaker*
 # alias = Polymaker PolyDissolve S1
 temperature = 220
-bed_temperature = 40
 first_layer_temperature = 215
 filament_cost = 79.99
 filament_density = 1.13
-filament_max_volumetric_speed = 20
+filament_max_volumetric_speed = 15
 extrusion_multiplier = 0.90
 start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.018}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\nM98 P{\"{directories.system^\\\"/System Macros/Change Settings/adjust_filament_monitor_sensitivity.g\\\"}\"} D{current_extruder} L60 H140\n{endif}"
 
@@ -1113,7 +1112,6 @@ start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder]
 [filament:Essentium Support S10 @HSP1]
 inherits = *PVA*; *Essentium*
 temperature = 215
-bed_temperature = 60
 first_layer_temperature = 210
 filament_cost = 100.00
 filament_density = 1.14
@@ -1141,7 +1139,6 @@ start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder]
 [filament:BASF Ultrafuse BVOH @HSP1]
 inherits = *BVOH*; *BASF*
 temperature = 215
-bed_temperature = 60
 first_layer_temperature = 210
 filament_cost = 143.00
 filament_density = 1.14
@@ -1149,6 +1146,15 @@ filament_max_volumetric_speed = 20
 extrusion_multiplier = 0.91
 start_filament_gcode = "; Filament gcode\n{if nozzle_diameter[initial_extruder] == 0.6}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.4}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 0.8}{local pressure_advance = 0.0}\n{elsif nozzle_diameter[initial_extruder] == 1.0}{local pressure_advance = 0.0}\n{endif}\n{if printer_notes=~/.*DUPLICATOR_MODE.*/}\nM572 D0:1 S{pressure_advance}\n{else}\nM572 D{current_extruder} S{pressure_advance}\n{endif}"
 
+#################### BASF presets ####################
+[filament:*Jabil*]
+filament_vendor = Jabil
+filament_spool_weight = 325
+
+[filament:Jabil PETG 0800 ESD @HSP1]
+inherits = *PETG*; *Jabil*
+temperature = 265
+bed_temperature = 80
 #################### Coex presets ####################
 [filament:*Coex*]
 filament_vendor = Coex