diff --git a/live/Lulzbot/0.0.1.ini b/live/Lulzbot/0.0.1.ini
deleted file mode 100644
index 67a97b6..0000000
--- a/live/Lulzbot/0.0.1.ini
+++ /dev/null
@@ -1,384 +0,0 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC
-
-[vendor]
-# Vendor name will be shown by the Config Wizard.
-name = LulzBot
-config_version = 0.0.1
-config_update_url = http://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
-
-[printer_model:MINI_AERO]
-name = Mini Aero
-variants = 0.5
-technology = FFF
-#bed_model = mini_bed.stl
-#bed_texture = mini.svg
-default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
-
-[printer_model:TAZ6_AERO]
-name = Taz6 Aero
-variants = 0.5
-technology = FFF
-default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
-
-[print:0.3mm @lulzbot]
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bridge_acceleration = 500
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 0
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 0
-external_perimeter_extrusion_width = 0.56
-external_perimeter_speed = 50%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.56
-fill_angle = 45
-fill_density = 20%
-fill_pattern = gyroid
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.6
-first_layer_height = 100%
-first_layer_speed = 40%
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.56
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-inherits = 
-interface_shells = 0
-layer_height = 0.3
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
-overhangs = 1
-perimeter_acceleration = 500
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.56
-perimeter_speed = 60
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-single_extruder_multi_material_priming = 1
-skirt_distance = 3
-skirt_height = 1
-skirts = 3
-slice_closing_radius = 0.049
-small_perimeter_speed = 15
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.56
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.44
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 12
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.52
-top_solid_infill_speed = 40
-top_solid_layers = 3
-travel_speed = 175
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[filament:ColorFabb PLA-PHA @lulzbot]
-filament_vendor = ColorFabb
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 0
-filament_density = 1.25
-filament_deretract_speed = nil
-filament_diameter = 2.85
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_wipe = nil
-first_layer_bed_temperature = 60
-first_layer_temperature = 200
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
-temperature = 200
-
-[filament:PrintedSolid Jesse PLA @lulzbot]
-filament_vendor = PrintedSolid
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 27
-filament_density = 1.25
-filament_deretract_speed = nil
-filament_diameter = 2.85
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_wipe = nil
-first_layer_bed_temperature = 60
-first_layer_temperature = 220
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
-temperature = 220
-
-[printer:Mini Aero 0.5mm]
-printer_model = MINI_AERO
-printer_variant = 0.5
-default_print_profile = 0.3mm @lulzbot
-default_filament_profile = PrintedSolid Jesse PLA @lulzbot
-bed_shape = 0x0,154x0,154x154,0x154
-before_layer_gcode = 
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-deretract_speed = 20
-end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG92 E1                                    ; set extruder to 1mm for retract on print end (LulzBot Cura had 5mm, might be a contributing factor to between print Aerostruder jamming)\nM117 Cooling please wait                  ; progress indicator message on LCD\nG1 X5 Y5 Z158 E0 F10000                   ; move to cooling position\nG1 E1                                     ; re-prime extruder\nM190 R40 ; wait for bed to cool down to removal temp\nM77					  ; Stop GLCD Timer\nG1 X145 F1000                             ; move extruder out of the way\nG1 Y175 F1000                             ; present finished print\nM140 S0; cool downs\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,1000
-machine_max_acceleration_y = 9000,1000
-machine_max_acceleration_z = 100,200
-machine_max_feedrate_e = 40,120
-machine_max_feedrate_x = 800,200
-machine_max_feedrate_y = 800,200
-machine_max_feedrate_z = 8,12
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 20,10
-machine_max_jerk_y = 20,10
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 158
-min_layer_height = 0.07
-nozzle_diameter = 0.5
-parking_pos_retraction = 92
-print_host = 
-printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 1
-retract_length_toolchange = 10
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-serial_port = 
-serial_speed = 250000
-silent_mode = 0
-single_extruder_multi_material = 0
-start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29       ; start auto-leveling sequence\nM420 S1   ; enable leveling matrix\nM425 Z    ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier.
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Taz6 Aero 0.5mm]
-printer_model = TAZ6_AERO
-printer_variant = 0.5
-default_print_profile = 0.3mm @lulzbot
-default_filament_profile = PrintedSolid Jesse PLA @lulzbot
-bed_shape = 0x0,280x0,280x280,0x280
-before_layer_gcode = 
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-deretract_speed = 20
-end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG91                                       ; relative positioning\nG1 E-1 F300                               ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000                ; lift up and retract even more filament\nG1 E6                                     ; re-prime extruder\nM117 Cooling please wait                  ; progress indicator message on LCD\nG90                                       ; absolute positioning\nG1 Y0 F3000                               ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000                             ; present finished print\nM140 S0; cool downs\nM77					  ; stop GLCD timer\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-host_type = octoprint
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 1000,5000
-machine_max_acceleration_extruding = 1000,1250
-machine_max_acceleration_retracting = 1000,1250
-machine_max_acceleration_x = 9000,1000
-machine_max_acceleration_y = 9000,1000
-machine_max_acceleration_z = 100,200
-machine_max_feedrate_e = 40,120
-machine_max_feedrate_x = 800,200
-machine_max_feedrate_y = 800,200
-machine_max_feedrate_z = 3,12
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 12,10
-machine_max_jerk_y = 12,10
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 250
-min_layer_height = 0.07
-nozzle_diameter = 0.5
-parking_pos_retraction = 92
-print_host = 
-printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
-printer_technology = FFF
-printhost_apikey = 
-printhost_cafile = 
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-serial_port = 
-serial_speed = 250000
-silent_mode = 0
-single_extruder_multi_material = 0
-start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29          ; start auto-leveling sequence\nM420 S1      ; enable leveling matrix\nM425 Z       ; use measured Z backlash for compensation\nM425 Z F0    ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
diff --git a/live/Lulzbot/0.0.2.ini b/live/Lulzbot/0.0.2.ini
deleted file mode 100644
index 2338bea..0000000
--- a/live/Lulzbot/0.0.2.ini
+++ /dev/null
@@ -1,372 +0,0 @@
-# generated by PrusaSlicer 2.1.1+win64 on 2020-02-25 at 01:51:21 UTC
-
-[vendor]
-# Vendor name will be shown by the Config Wizard.
-name = LulzBot
-config_version = 0.0.2
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
-
-[printer_model:MINI_AERO]
-name = Mini Aero
-variants = 0.5
-technology = FFF
-#bed_model = mini_bed.stl
-#bed_texture = mini.svg
-default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
-
-[printer_model:TAZ6_AERO]
-name = Taz6 Aero
-variants = 0.5
-technology = FFF
-default_materials = ColorFabb PLA-PHA @lulzbot;PrintedSolid Jesse PLA @lulzbot
-
-[print:0.3mm @lulzbot]
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = rectilinear
-bottom_solid_layers = 3
-bridge_acceleration = 500
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 0
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 1
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 0
-external_perimeter_extrusion_width = 0.56
-external_perimeter_speed = 50%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.56
-fill_angle = 45
-fill_density = 20%
-fill_pattern = gyroid
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.6
-first_layer_height = 100%
-first_layer_speed = 40%
-gap_fill_speed = 20
-gcode_comments = 0
-gcode_label_objects = 0
-infill_acceleration = 500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.56
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-inherits = 
-interface_shells = 0
-layer_height = 0.3
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 0
-notes = 
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
-overhangs = 1
-perimeter_acceleration = 500
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.56
-perimeter_speed = 60
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-single_extruder_multi_material_priming = 1
-skirt_distance = 3
-skirt_height = 1
-skirts = 3
-slice_closing_radius = 0.049
-small_perimeter_speed = 15
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.56
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_auto = 1
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.44
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 1
-support_material_xy_spacing = 50%
-thin_walls = 1
-threads = 12
-top_fill_pattern = rectilinear
-top_infill_extrusion_width = 0.52
-top_solid_infill_speed = 40
-top_solid_layers = 3
-travel_speed = 175
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[filament:ColorFabb PLA-PHA @lulzbot]
-filament_vendor = ColorFabb
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 0
-filament_density = 1.25
-filament_deretract_speed = nil
-filament_diameter = 2.85
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_wipe = nil
-first_layer_bed_temperature = 60
-first_layer_temperature = 200
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
-temperature = 200
-
-[filament:PrintedSolid Jesse PLA @lulzbot]
-filament_vendor = PrintedSolid
-bed_temperature = 60
-bridge_fan_speed = 100
-compatible_printers = 
-compatible_printers_condition = 
-compatible_prints = 
-compatible_prints_condition = 
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cooling_final_speed = 3.4
-filament_cooling_initial_speed = 2.2
-filament_cooling_moves = 4
-filament_cost = 27
-filament_density = 1.25
-filament_deretract_speed = nil
-filament_diameter = 2.85
-filament_load_time = 0
-filament_loading_speed = 28
-filament_loading_speed_start = 3
-filament_max_volumetric_speed = 0
-filament_minimal_purge_on_wipe_tower = 15
-filament_notes = ""
-filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
-filament_retract_before_travel = nil
-filament_retract_before_wipe = nil
-filament_retract_layer_change = nil
-filament_retract_length = nil
-filament_retract_lift = nil
-filament_retract_lift_above = nil
-filament_retract_lift_below = nil
-filament_retract_restart_extra = nil
-filament_retract_speed = nil
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PLA
-filament_unload_time = 0
-filament_unloading_speed = 90
-filament_unloading_speed_start = 100
-filament_wipe = nil
-first_layer_bed_temperature = 60
-first_layer_temperature = 220
-inherits = 
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 5
-start_filament_gcode = "; Filament gcode\n"
-temperature = 220
-
-[printer:Mini Aero 0.5mm]
-printer_model = MINI_AERO
-printer_variant = 0.5
-default_print_profile = 0.3mm @lulzbot
-default_filament_profile = PrintedSolid Jesse PLA @lulzbot
-bed_shape = 0x0,154x0,154x154,0x154
-before_layer_gcode = 
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-deretract_speed = 20
-end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG92 E1                                    ; set extruder to 1mm for retract on print end (LulzBot Cura had 5mm, might be a contributing factor to between print Aerostruder jamming)\nM117 Cooling please wait                  ; progress indicator message on LCD\nG1 X5 Y5 Z158 E0 F10000                   ; move to cooling position\nG1 E1                                     ; re-prime extruder\nM190 R40 ; wait for bed to cool down to removal temp\nM77					  ; Stop GLCD Timer\nG1 X145 F1000                             ; move extruder out of the way\nG1 Y175 F1000                             ; present finished print\nM140 S0; cool downs\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 10000,5000
-machine_max_acceleration_extruding = 1500,1250
-machine_max_acceleration_retracting = 1500,1250
-machine_max_acceleration_x = 9000,1000
-machine_max_acceleration_y = 9000,1000
-machine_max_acceleration_z = 100,200
-machine_max_feedrate_e = 40,120
-machine_max_feedrate_x = 800,200
-machine_max_feedrate_y = 800,200
-machine_max_feedrate_z = 8,12
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 20,10
-machine_max_jerk_y = 20,10
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 158
-min_layer_height = 0.07
-nozzle_diameter = 0.5
-parking_pos_retraction = 92
-printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 1
-retract_length_toolchange = 10
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-silent_mode = 0
-single_extruder_multi_material = 0
-start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29       ; start auto-leveling sequence\nM420 S1   ; enable leveling matrix\nM425 Z    ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier.
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Taz6 Aero 0.5mm]
-printer_model = TAZ6_AERO
-printer_variant = 0.5
-default_print_profile = 0.3mm @lulzbot
-default_filament_profile = PrintedSolid Jesse PLA @lulzbot
-bed_shape = 0x0,280x0,280x280,0x280
-before_layer_gcode = 
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-deretract_speed = 20
-end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG91                                       ; relative positioning\nG1 E-1 F300                               ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000                ; lift up and retract even more filament\nG1 E6                                     ; re-prime extruder\nM117 Cooling please wait                  ; progress indicator message on LCD\nG90                                       ; absolute positioning\nG1 Y0 F3000                               ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000                             ; present finished print\nM140 S0; cool downs\nM77					  ; stop GLCD timer\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 1000,5000
-machine_max_acceleration_extruding = 1000,1250
-machine_max_acceleration_retracting = 1000,1250
-machine_max_acceleration_x = 9000,1000
-machine_max_acceleration_y = 9000,1000
-machine_max_acceleration_z = 100,200
-machine_max_feedrate_e = 40,120
-machine_max_feedrate_x = 800,200
-machine_max_feedrate_y = 800,200
-machine_max_feedrate_z = 3,12
-machine_max_jerk_e = 2.5,2.5
-machine_max_jerk_x = 12,10
-machine_max_jerk_y = 12,10
-machine_max_jerk_z = 0.2,0.4
-machine_min_extruding_rate = 0,0
-machine_min_travel_rate = 0,0
-max_layer_height = 0
-max_print_height = 250
-min_layer_height = 0.07
-nozzle_diameter = 0.5
-parking_pos_retraction = 92
-printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
-printer_technology = FFF
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 40
-silent_mode = 0
-single_extruder_multi_material = 0
-start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29          ; start auto-leveling sequence\nM420 S1      ; enable leveling matrix\nM425 Z       ; use measured Z backlash for compensation\nM425 Z F0    ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
diff --git a/live/Lulzbot/0.1.0.ini b/live/Lulzbot/0.1.0.ini
deleted file mode 100644
index 3ab6999..0000000
--- a/live/Lulzbot/0.1.0.ini
+++ /dev/null
@@ -1,423 +0,0 @@
-# LulzBot profiles
-# Based on community profiles and original profiles from Cura LulzBot Edition.
-
-[vendor]
-# Vendor name will be shown by the Config Wizard.
-name = LulzBot
-config_version = 0.1.0
-config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/LulzBot/
-
-[printer_model:MINI_AERO]
-name = Mini Aero
-variants = 0.5
-technology = FFF
-#bed_model = mini_bed.stl
-#bed_texture = mini.svg
-default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
-
-[printer_model:TAZ6_AERO]
-name = Taz6 Aero
-variants = 0.5
-technology = FFF
-default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
-
-# [printer_model:TAZ_WORKHORSE]
-# name = Taz Workhorse
-# variants = 0.5
-# technology = FFF
-# default_materials = Generic PLA @lulzbot; Generic PETG @lulzbot; Jessie PLA @lulzbot
-
-[print:*common*]
-avoid_crossing_perimeters = 0
-bottom_fill_pattern = monotonic
-top_fill_pattern = monotonic
-bottom_solid_layers = 3
-top_solid_layers = 4
-bridge_acceleration = 500
-bridge_angle = 0
-bridge_flow_ratio = 1
-bridge_speed = 30
-brim_width = 0
-clip_multipart_objects = 0
-compatible_printers = 
-compatible_printers_condition = 
-complete_objects = 0
-default_acceleration = 500
-dont_support_bridges = 0
-elefant_foot_compensation = 0
-ensure_vertical_shell_thickness = 1
-extra_perimeters = 0
-external_perimeter_extrusion_width = 0.56
-external_perimeter_speed = 35
-external_perimeters_first = 0
-extrusion_width = 0.56
-fill_angle = 45
-fill_density = 20%
-fill_pattern = grid
-first_layer_acceleration = 500
-first_layer_extrusion_width = 0.6
-first_layer_height = 0.3
-first_layer_speed = 15
-gap_fill_speed = 20
-infill_anchor = 1
-infill_anchor_max = 20
-infill_acceleration = 500
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.56
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-layer_height = 0.25
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 0
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [printer_settings_id]_[input_filename_base]_[layer_height]_[filament_type]_[print_time].gcode
-overhangs = 1
-perimeter_acceleration = 500
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.56
-perimeter_speed = 45
-perimeters = 3
-post_process = 
-raft_layers = 0
-raft_first_layer_density = 70
-resolution = 0
-seam_position = aligned
-single_extruder_multi_material_priming = 1
-skirt_distance = 3
-skirt_height = 1
-skirts = 3
-slice_closing_radius = 0.049
-small_perimeter_speed = 22
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.56
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 45
-support_material_auto = 1
-support_material_buildplate_only = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.44
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2.5
-support_material_speed = 50
-support_material_synchronize_layers = 0
-support_material_threshold = 0
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-thin_walls = 1
-top_infill_extrusion_width = 0.52
-top_solid_infill_speed = 40
-travel_speed = 175
-wipe_tower = 0
-wipe_tower_bridging = 10
-wipe_tower_rotation_angle = 0
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0
-
-[print:0.14mm DETAIL @lulzbot]
-inherits = *common*
-layer_height = 0.14
-bottom_solid_layers = 8
-top_solid_layers = 8
-infill_speed = 40
-solid_infill_speed = 50
-perimeter_speed = 35
-external_perimeter_speed = 30
-top_solid_infill_speed = 40
-
-[print:0.25mm STANDARD @lulzbot]
-inherits = *common*
-
-[print:0.30mm SPEED @lulzbot]
-inherits = *common*
-renamed_from = "0.3mm @lulzbot"
-layer_height = 0.3
-seam_position = nearest
-top_solid_layers = 3
-infill_speed = 45
-perimeter_speed = 40
-external_perimeter_speed = 35
-
-[filament:ColorFabb PLA-PHA @lulzbot]
-filament_vendor = ColorFabb
-bed_temperature = 60
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cost = 0
-filament_density = 1.25
-filament_diameter = 2.85
-filament_soluble = 0
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 200
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-slowdown_below_layer_time = 10
-start_filament_gcode = "; Filament gcode\n"
-temperature = 200
-
-[filament:Jessie PLA @lulzbot]
-filament_vendor = Printed Solid
-renamed_from = "PrintedSolid Jesse PLA @lulzbot"
-bed_temperature = 60
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cost = 27
-filament_density = 1.24
-filament_diameter = 2.85
-filament_type = PLA
-first_layer_bed_temperature = 60
-first_layer_temperature = 220
-max_fan_speed = 100
-min_fan_speed = 80
-min_print_speed = 10
-slowdown_below_layer_time = 10
-start_filament_gcode = "; Filament gcode\n"
-temperature = 220
-
-[filament:Generic PLA @lulzbot]
-inherits = Jessie PLA @lulzbot
-filament_vendor = Generic
-
-[filament:Generic PETG @lulzbot]
-filament_vendor = Generic
-bed_temperature = 60
-first_layer_bed_temperature = 65
-first_layer_temperature = 235
-temperature = 230
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 3
-end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 60
-filament_colour = #29B2B2
-filament_cost = 27
-filament_density = 1.27
-filament_diameter = 2.85
-filament_notes = "Use glue stick."
-filament_soluble = 0
-filament_toolchange_delay = 0
-filament_type = PETG
-max_fan_speed = 80
-min_fan_speed = 40
-min_print_speed = 10
-slowdown_below_layer_time = 10
-start_filament_gcode = "; Filament gcode\n"
-
-[printer:Mini Aero 0.5mm]
-printer_model = MINI_AERO
-printer_variant = 0.5
-default_print_profile = 0.25mm STANDARD @lulzbot
-default_filament_profile = Jessie PLA @lulzbot
-bed_shape = 0x0,154x0,154x154,0x154
-before_layer_gcode = 
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-deretract_speed = 20
-end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG92 E1                                    ; set extruder to 1mm for retract on print end (LulzBot Cura had 5mm, might be a contributing factor to between print Aerostruder jamming)\nM117 Cooling please wait                  ; progress indicator message on LCD\nG1 X5 Y5 Z158 E0 F10000                   ; move to cooling position\nG1 E1                                     ; re-prime extruder\nM190 R40 ; wait for bed to cool down to removal temp\nM77					  ; Stop GLCD Timer\nG1 X145 F1000                             ; move extruder out of the way\nG1 Y175 F1000                             ; present finished print\nM140 S0; cool downs\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 10000
-machine_max_acceleration_extruding = 1500
-machine_max_acceleration_retracting = 1500
-machine_max_acceleration_x = 9000
-machine_max_acceleration_y = 9000
-machine_max_acceleration_z = 100
-machine_max_feedrate_e = 40
-machine_max_feedrate_x = 300
-machine_max_feedrate_y = 300
-machine_max_feedrate_z = 8
-machine_max_jerk_e = 2.5
-machine_max_jerk_x = 20
-machine_max_jerk_y = 20
-machine_max_jerk_z = 0.2
-machine_min_extruding_rate = 0
-machine_min_travel_rate = 0
-machine_limits_usage = time_estimate_only
-max_layer_height = 0
-max_print_height = 158
-min_layer_height = 0.07
-nozzle_diameter = 0.5
-parking_pos_retraction = 92
-printer_notes = LulzBot Mini w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 1
-retract_length = 1
-retract_length_toolchange = 10
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-silent_mode = 0
-single_extruder_multi_material = 0
-start_gcode = ;This G-Code has been generated specifically for the LulzBot Mini with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28; home all axes\nG0 X0 Y187 Z156 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; soften filament before retraction\n;G1 E-15 F75 ; retract filament (LulzBot Cura is apparently trying to cold pull, might be a contributing factor to hob gear filling with filament)\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X45 Y173 F11520 ; move above wiper pad\nG1 Z0 F1200 ; push nozzle into wiper\nG1 X42 Y173 Z-.5 F4000 ; wiping\nG1 X52 Y171 Z-.5 F4000 ; wiping\nG1 X42 Y173 Z0 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X42 Y173 F4000 ; wiping\nG1 X52 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X77 Y171 F4000 ; wiping\nG1 X57 Y173 F4000 ; wiping\nG1 X87 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X77 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X97 Y171 F4000 ; wiping\nG1 X107 Y173 F4000 ; wiping\nG1 X112 Y171 Z-0.5 F1000 ; wiping\nG1 Z10 ; raise extruder\nG28 X0 Y0 ; home X and Y\nG0 X0 Y187 F200 ; move away from endstops\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nM204 S300 ; set probing acceleration\nG29       ; start auto-leveling sequence\nM420 S1   ; enable leveling matrix\nM425 Z    ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S2000 ; restore standard acceleration\nG28 X0 Y0 ; re-home to account for build variance of earlier mini builds\nG0 X0 Y187 F200 ; move away from endstops\nG0 Y152 F4000 ; move in front of wiper pad\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 Mini Printing... ; progress indicator message on LCD\nM221 S74 ; Printer specific extrusion modifier.
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-[printer:Taz6 Aero 0.5mm]
-printer_model = TAZ6_AERO
-printer_variant = 0.5
-default_print_profile = 0.25mm STANDARD @lulzbot
-default_filament_profile = Jessie PLA @lulzbot
-bed_shape = 0x0,280x0,280x280,0x280
-before_layer_gcode = 
-between_objects_gcode = 
-cooling_tube_length = 5
-cooling_tube_retraction = 91.5
-deretract_speed = 20
-end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG91                                       ; relative positioning\nG1 E-1 F300                               ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000                ; lift up and retract even more filament\nG1 E6                                     ; re-prime extruder\nM117 Cooling please wait                  ; progress indicator message on LCD\nG90                                       ; absolute positioning\nG1 Y0 F3000                               ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000                             ; present finished print\nM140 S0; cool downs\nM77					  ; stop GLCD timer\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
-extra_loading_move = -2
-extruder_colour = ""
-extruder_offset = 0x0
-gcode_flavor = marlin
-high_current_on_filament_swap = 0
-inherits = 
-layer_gcode = 
-machine_max_acceleration_e = 1000
-machine_max_acceleration_extruding = 500
-machine_max_acceleration_retracting = 1000
-machine_max_acceleration_x = 9000
-machine_max_acceleration_y = 9000
-machine_max_acceleration_z = 100
-machine_max_feedrate_e = 40
-machine_max_feedrate_x = 300
-machine_max_feedrate_y = 300
-machine_max_feedrate_z = 3
-machine_max_jerk_e = 10
-machine_max_jerk_x = 8
-machine_max_jerk_y = 8
-machine_max_jerk_z = 0.4
-machine_min_extruding_rate = 0
-machine_min_travel_rate = 0
-machine_limits_usage = time_estimate_only
-max_layer_height = 0
-max_print_height = 250
-min_layer_height = 0.07
-nozzle_diameter = 0.5
-parking_pos_retraction = 92
-printer_notes = LulzBot Taz 6 w/ Aerostruder profile for Delaware Library System, Rt9 Library and Innovation Center.
-printer_technology = FFF
-remaining_times = 0
-retract_before_travel = 2
-retract_before_wipe = 0%
-retract_layer_change = 0
-retract_length = 2
-retract_length_toolchange = 10
-retract_lift = 0
-retract_lift_above = 0
-retract_lift_below = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-silent_mode = 0
-single_extruder_multi_material = 0
-start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ 6 with Aerosturder\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nG28 XY ; home X and Y\nG1 X-19 Y258 F1000 ; move to safe homing position\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 Z ; home Z\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach wiping temp\nG1 X-15 Y100 F3000 ; move above wiper pad\nG1 Z1 ; push nozzle into wiper\nG1 X-17 Y95 F1000 ; slow wipe\nG1 X-17 Y90 F1000 ; slow wipe\nG1 X-17 Y85 F1000 ; slow wipe\nG1 X-15 Y90 F1000 ; slow wipe\nG1 X-17 Y80 F1000 ; slow wipe\nG1 X-15 Y95 F1000 ; slow wipe\nG1 X-17 Y75 F2000 ; fast wipe\nG1 X-15 Y65 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y60 F2000 ; fast wipe\nG1 X-17 Y55 F2000 ; fast wipe\nG1 X-15 Y50 F2000 ; fast wipe\nG1 X-17 Y40 F2000 ; fast wipe\nG1 X-15 Y45 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y40 F2000 ; fast wipe\nG1 X-17 Y70 F2000 ; fast wipe\nG1 X-15 Y30 Z2 F2000 ; fast wipe\nG1 X-17 Y35 F2000 ; fast wipe\nG1 X-15 Y25 F2000 ; fast wipe\nG1 X-17 Y30 F2000 ; fast wipe\nG1 X-15 Y25 Z1.5 F1000 ; slow wipe\nG1 X-17 Y23 F1000 ; slow wipe\nG1 Z10 ; raise extruder\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X-9 Y-9 ; move above first probe point\nM204 S100 ; set probing acceleration\nG29          ; start auto-leveling sequence\nM420 S1      ; enable leveling matrix\nM425 Z       ; use measured Z backlash for compensation\nM425 Z F0    ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ 6 Printing... ; progress indicator message on LCD\n
-thumbnails = 
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-use_volumetric_e = 0
-variable_layer_height = 1
-wipe = 1
-z_offset = 0
-
-# [printer:Taz Workhorse 0.5mm]
-# printer_model = TAZ_WORKHORSE
-# printer_variant = 0.5
-# printer_technology = FFF
-# default_print_profile = 0.25mm STANDARD @lulzbot
-# default_filament_profile = Jessie PLA @lulzbot
-# bed_shape = 0x0,280x0,280x280,0x280
-# deretract_speed = 20
-# end_gcode = M400                                      ; wait for moves to finish\nM140 S40 ; start bed cooling\nM104 S0                                   ; disable hotend\nM107                                      ; disable fans\nG91                                       ; relative positioning\nG1 E-1 F300                               ; filament retraction to release pressure\nG1 Z20 E-5 X-20 Y-20 F3000                ; lift up and retract even more filament\nG1 E6                                     ; re-prime extruder\nM117 Cooling please wait                  ; progress indicator message on LCD\nG90                                       ; absolute positioning\nG1 Y0 F3000                               ; move to cooling position\nM190 R40 ; wait for bed to cool down to removal temp\nG1 Y280 F3000                             ; present finished print\nM140 S0; cool downs\nM77					  ; stop GLCD timer\nM84                                       ; disable steppers\nG90                                       ; absolute positioning\nM117 Print Complete.                      ; print complete message\n
-# extra_loading_move = -2
-# extruder_colour = ""
-# extruder_offset = 0x0
-# gcode_flavor = marlin
-# high_current_on_filament_swap = 0
-# machine_max_acceleration_e = 3000
-# machine_max_acceleration_extruding = 500
-# machine_max_acceleration_retracting = 2000
-# machine_max_acceleration_x = 9000
-# machine_max_acceleration_y = 9000
-# machine_max_acceleration_z = 100
-# machine_max_feedrate_e = 40
-# machine_max_feedrate_x = 300
-# machine_max_feedrate_y = 300
-# machine_max_feedrate_z = 25
-# machine_max_jerk_e = 10
-# machine_max_jerk_x = 8
-# machine_max_jerk_y = 8
-# machine_max_jerk_z = 0.4
-# machine_min_extruding_rate = 0
-# machine_min_travel_rate = 0
-# machine_limits_usage = time_estimate_only
-# max_layer_height = 0
-# max_print_height = 285
-# min_layer_height = 0.07
-# nozzle_diameter = 0.5
-# remaining_times = 0
-# retract_before_travel = 2
-# retract_before_wipe = 0%
-# retract_layer_change = 0
-# retract_length = 2
-# retract_length_toolchange = 10
-# retract_lift = 0
-# retract_speed = 40
-# silent_mode = 0
-# single_extruder_multi_material = 0
-# start_gcode = ;This G-Code has been generated specifically for the LulzBot TAZ Workhorse with HE Tool Head\n;\n;The following lines can be uncommented for printer specific fine tuning\n;More information can be found at https://marlinfw.org/meta/gcode/\n;\n;M92 E420                 ;Set Axis Steps-per-unit\n;M301 P21.0 I1.78 D61.93  ;Set Hotend PID\n;M906 E160                ;Digipot Motor Current ((875mA-750)/5+135) = 160\n;\nM73 P0 ; clear GLCD progress bar\nM75 ; start GLCD timer\nG26 ; clear potential 'probe fail' condition\nM107 ; disable fans\nM420 S0 ; disable previous leveling matrix\nG90 ; absolute positioning\nM82 ; set extruder to absolute mode\nG92 E0 ; set extruder position to 0\nM140 S{first_layer_bed_temperature[0]} ; start bed heating up\nM109 R{first_layer_temperature[0] - 60} ; soften filament before homing Z\nG28 ; Home all axis\nG1 E-15 F100 ; retract filament\nM109 R{first_layer_temperature[0] - 60}                   ; wait for extruder to reach wiping temp\n;M206 X0 Y0 Z0              ; uncomment to adjust wipe position (+X ~ nozzle moves left)(+Y ~ nozzle moves forward)(+Z ~ nozzle moves down)\nG12                         ; wiping sequence\nM206 X0 Y0 Z0               ; reseting stock nozzle position ### CAUTION: changing this line can affect print quality ###\nM109 R{first_layer_temperature[0] - 60} ; wait for extruder to reach probe temp\nG1 X288 Y-10 F4000; move above first probe point\nM204 S100 ; set probing acceleration\nG29       ; start auto-leveling sequence\nM420 S1   ; activate bed level matrix\nM425 Z    ; use measured Z backlash for compensation\nM425 Z F0 ; turn off measured Z backlash compensation. (if activated in the quality settings, this command will automatically be ignored)\nM204 S500 ; restore standard acceleration\nG1 X0 Y0 Z15 F5000 ; move up off last probe point\nG4 S1 ; pause\nM400 ; wait for moves to finish\nM117 Heating... ; progress indicator message on LCD\nM109 R{first_layer_temperature[0]}  ; wait for extruder to reach printing temp\nM190 R{first_layer_bed_temperature[0]} ; wait for bed to reach printing temp\nG1 Z2 E0 F75 ; prime tiny bit of filament into the nozzle\nM117 TAZ Workhorse Printing... ; progress indicator message on LCD
-# use_relative_e_distances = 0
-# use_volumetric_e = 0
-# variable_layer_height = 1
-# wipe = 1
-# z_offset = 0
diff --git a/live/Lulzbot/index.idx b/live/Lulzbot/index.idx
deleted file mode 100644
index e182c33..0000000
--- a/live/Lulzbot/index.idx
+++ /dev/null
@@ -1,5 +0,0 @@
-min_slic3r_version = 2.3.0-beta2
-0.1.0 General rework. Added new print and filament profiles. 
-0.0.2 Removed obsolete host keys
-min_slic3r_version = 2.2.0-alpha3
-0.0.1 Initial version