diff --git a/live/TriLAB/1.0.4.ini b/live/TriLAB/1.0.4.ini
index a93e9f2..05c734f 100644
--- a/live/TriLAB/1.0.4.ini
+++ b/live/TriLAB/1.0.4.ini
@@ -761,7 +761,7 @@ filament_retract_length = 3.8
 
 [filament:Prusament PLA @DQ2 0.8 nozzle]
 renamed_from = "DeltiQ - PLA - Prusament (Prusa Polymers) @0.8 nozzle"
-inherits = Prusament PLA @DQ2; ; *DQ2 0.8*
+inherits = Prusament PLA @DQ2; *DQ2 0.8*
 disable_fan_first_layers = 1
 filament_max_volumetric_speed = 40
 first_layer_temperature = 230
@@ -788,7 +788,7 @@ slowdown_below_layer_time = 1
 start_filament_gcode = "; FILAMENT_START_GCODE\nM191 S0 ; Wait for chamber temperature"
 
 [filament:Prusament PLA (Door Opened) @AQD]
-inherits = Prusament PLA @AQI; *AQD 0.4*
+inherits = Prusament PLA (Door Opened) @AQI; *AQD 0.4*
 
 [filament:Fillamentum PLA @DQ2]
 renamed_from = "DeltiQ - PLA - ExtraFill (Fillamentum)"
@@ -1456,7 +1456,7 @@ filament_retract_lift = 0.25
 filament_cost = 133.82
 
 [filament:Fiberlogy Nylon PA12+CF15 @DQ2 0.6 nozzle]
-inherits = Fiberlogy Nylon PA12CF @DQ2; *DQ2 0.6X*
+inherits = Fiberlogy Nylon PA12+CF15 @DQ2; *DQ2 0.6X*
 bridge_fan_speed = 50
 max_fan_speed = 40
 min_fan_speed = 20
@@ -1487,7 +1487,7 @@ filament_retract_lift = 0.25
 filament_cost = 113.82
 
 [filament:Fiberlogy Nylon PA12+GF15 @DQ2 0.6 nozzle]
-inherits = Fiberlogy Nylon PA12GF @DQ2; *DQ2 0.6X*
+inherits = Fiberlogy Nylon PA12+GF15 @DQ2; *DQ2 0.6X*
 bridge_fan_speed = 50
 max_fan_speed = 40
 min_fan_speed = 20
@@ -2422,24 +2422,6 @@ max_print_height = 400
 default_filament_profile = "Prusament ASA @AQI"
 default_print_profile = 0.20mm Normal @AQ
 
-[printer:AzteQ Dynamic - 0.6 nozzle]
-inherits = AzteQ Dynamic
-printer_variant = 0.6
-max_layer_height = 0.4
-min_layer_height = 0.2
-nozzle_diameter = 0.6
-default_filament_profile = "Prusament ASA @AQD 0.6 nozzle"
-default_print_profile = 0.30mm Normal @AQ 0.6 nozzle
-
-[printer:AzteQ Dynamic - 0.8 nozzle]
-inherits = AzteQ Dynamic
-printer_variant = 0.8
-max_layer_height = 0.6
-min_layer_height = 0.2
-nozzle_diameter = 0.8
-default_filament_profile = "Prusament ASA @AQD 0.8 nozzle"
-default_print_profile = 0.40mm Normal @AQ 0.8 nozzle
-
 [presets]
 print = 0.20mm Normal @DQ2
 printer = DeltiQ 2