diff --git a/Slic3r settings MK2/print/0.20mm MM Soluble.ini b/Slic3r settings MK2/print/0.20mm MM Soluble.ini
deleted file mode 100644
index c8bcee9..0000000
--- a/Slic3r settings MK2/print/0.20mm MM Soluble.ini	
+++ /dev/null
@@ -1,101 +0,0 @@
-# generated by Slic3r 1.35.0.13-prusa3d-win64 on Tue May 30 15:26:17 2017
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 1000
-bridge_flow_ratio = 0.95
-bridge_speed = 20
-brim_width = 0
-clip_multipart_objects = 1
-complete_objects = 0
-default_acceleration = 1000
-dont_support_bridges = 1
-ensure_vertical_shell_thickness = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 30
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 20%
-fill_pattern = cubic
-first_layer_acceleration = 1000
-first_layer_extrusion_width = 0.42
-first_layer_height = 0.2
-first_layer_speed = 70%
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 2000
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 25%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 100
-max_volumetric_extrusion_rate_slope_negative = 0
-max_volumetric_extrusion_rate_slope_positive = 0
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = Set your solluble extruder in Multiple Extruders > Support material/raft/skirt extruder &  Support material/raft interface extruder
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 800
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-print_settings_id = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 1
-skirts = 0
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 1
-support_material_angle = 0
-support_material_buildplate_only = 0
-support_material_contact_distance = 0
-support_material_enforce_layers = 0
-support_material_extruder = 2
-support_material_extrusion_width = 0.45
-support_material_interface_contact_loops = 0
-support_material_interface_extruder = 2
-support_material_interface_layers = 2
-support_material_interface_spacing = 0.2
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 2
-support_material_speed = 50
-support_material_synchronize_layers = 1
-support_material_threshold = 35
-support_material_with_sheath = 1
-support_material_xy_spacing = 60%
-thin_walls = 0
-threads = 4
-top_infill_extrusion_width = 0.4
-top_solid_infill_speed = 30
-top_solid_layers = 6
-travel_speed = 120
-wipe_tower = 1
-wipe_tower_per_color_wipe = 15
-wipe_tower_width = 60
-wipe_tower_x = 180
-wipe_tower_y = 140
-xy_size_compensation = 0