diff --git a/Settings/filament/ColorFabb Brass Bronze  1.75mm.ini b/Settings/filament/ColorFabb Brass Bronze  1.75mm.ini
index 1d55c35..c1e1b5f 100644
--- a/Settings/filament/ColorFabb Brass Bronze  1.75mm.ini	
+++ b/Settings/filament/ColorFabb Brass Bronze  1.75mm.ini	
@@ -1,5 +1,5 @@
-# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 10:56:12
-bed_temperature = 50
+# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 11:37:44
+bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK2 MultiMaterial";"Original Prusa i3 MK2 MultiMaterial 0.6 nozzle";"Original Prusa i3 MK3"
 cooling = 1
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1.3
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_colour = #B79A39
+filament_colour = #804040
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
@@ -17,7 +17,7 @@ filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
 filament_type = PLA
-first_layer_bed_temperature = 50
+first_layer_bed_temperature = 60
 first_layer_temperature = 210
 max_fan_speed = 100
 min_fan_speed = 85
diff --git a/Settings/filament/ColorFabb HT 1.75mm.ini b/Settings/filament/ColorFabb HT 1.75mm.ini
index 2f073c0..9101d30 100644
--- a/Settings/filament/ColorFabb HT 1.75mm.ini	
+++ b/Settings/filament/ColorFabb HT 1.75mm.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 10
-filament_colour = #ACFDF8
+filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/ColorFabb PLA-PHA.ini b/Settings/filament/ColorFabb PLA-PHA.ini
index 2aefa94..cbcfe4b 100644
--- a/Settings/filament/ColorFabb PLA-PHA.ini	
+++ b/Settings/filament/ColorFabb PLA-PHA.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_colour = #FF14E2
+filament_colour = #FF3232
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/ColorFabb Woodfil 1.75mm.ini b/Settings/filament/ColorFabb Woodfil 1.75mm.ini
index c3d643d..aef1a3c 100644
--- a/Settings/filament/ColorFabb Woodfil 1.75mm.ini	
+++ b/Settings/filament/ColorFabb Woodfil 1.75mm.ini	
@@ -1,5 +1,5 @@
-# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 10:56:33
-bed_temperature = 50
+# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 11:37:57
+bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK2 MultiMaterial";"Original Prusa i3 MK2 MultiMaterial 0.6 nozzle";"Original Prusa i3 MK3"
 cooling = 1
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1.2
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_colour = #5A4110
+filament_colour = #804040
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
@@ -17,7 +17,7 @@ filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
 filament_type = PLA
-first_layer_bed_temperature = 50
+first_layer_bed_temperature = 60
 first_layer_temperature = 200
 max_fan_speed = 100
 min_fan_speed = 85
diff --git a/Settings/filament/ColorFabb XT 1.75mm.ini b/Settings/filament/ColorFabb XT 1.75mm.ini
index c5af3d8..a1c3460 100644
--- a/Settings/filament/ColorFabb XT 1.75mm.ini	
+++ b/Settings/filament/ColorFabb XT 1.75mm.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_colour = #A36FFD
+filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/ColorFabb XT-CF20 1.75mm.ini b/Settings/filament/ColorFabb XT-CF20 1.75mm.ini
index b47050d..ef7ae92 100644
--- a/Settings/filament/ColorFabb XT-CF20 1.75mm.ini	
+++ b/Settings/filament/ColorFabb XT-CF20 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.37.1.25-prusa3d-win64 on 
+# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 11:38:44
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -8,12 +8,12 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1.2
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_colour = #000000
+filament_colour = #804040
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
 filament_max_volumetric_speed = 1
-filament_notes = 
+filament_notes = ""
 filament_settings_id = 
 filament_soluble = 0
 filament_type = PET
diff --git a/Settings/filament/ColorFabb nGen 1.75mm.ini b/Settings/filament/ColorFabb nGen 1.75mm.ini
index b3f5dcd..3e2ffa0 100644
--- a/Settings/filament/ColorFabb nGen 1.75mm.ini	
+++ b/Settings/filament/ColorFabb nGen 1.75mm.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 10
-filament_colour = #ACFDF8
+filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/ColorFabb nGen flex.ini b/Settings/filament/ColorFabb nGen flex.ini
index a40a4f1..0ed5b61 100644
--- a/Settings/filament/ColorFabb nGen flex.ini	
+++ b/Settings/filament/ColorFabb nGen flex.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 10
-filament_colour = #ACFDF8
+filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/E3D Edge.ini b/Settings/filament/E3D Edge.ini
index 0b28881..32f0ce5 100644
--- a/Settings/filament/E3D Edge.ini	
+++ b/Settings/filament/E3D Edge.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_colour = #B5F5FD
+filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Fillamentum ASA 1.75mm.ini b/Settings/filament/Fillamentum ASA 1.75mm.ini
index f8e6772..6a0359c 100644
--- a/Settings/filament/Fillamentum ASA 1.75mm.ini	
+++ b/Settings/filament/Fillamentum ASA 1.75mm.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_colour = #FF8000
+filament_colour = #3A80CA
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Fillamentum CPE HG100 HM100.ini b/Settings/filament/Fillamentum CPE HG100 HM100.ini
index 2c1d76a..8cd957d 100644
--- a/Settings/filament/Fillamentum CPE HG100 HM100.ini	
+++ b/Settings/filament/Fillamentum CPE HG100 HM100.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r 1.37.1.25-prusa3d-win64 on 
+# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 11:38:20
 bed_temperature = 90
 bridge_fan_speed = 50
 compatible_printers = 
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_colour = #B5F5FD
+filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Fillamentum Timberfil.ini b/Settings/filament/Fillamentum Timberfil.ini
index 44baf42..755d9d7 100644
--- a/Settings/filament/Fillamentum Timberfil.ini	
+++ b/Settings/filament/Fillamentum Timberfil.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 10:57:16
+# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 11:38:05
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = "Original Prusa i3 MK2";"Original Prusa i3 MK2 0.6 nozzle";"Original Prusa i3 MK2 MM Single Mode";"Original Prusa i3 MK2 MM Single Mode 0.6 nozzle";"Original Prusa i3 MK2 MultiMaterial";"Original Prusa i3 MK2 MultiMaterial 0.6 nozzle";"Original Prusa i3 MK3"
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1.2
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_colour = #FF14E2
+filament_colour = #804040
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Generic PET 1.75mm.ini b/Settings/filament/Generic PET 1.75mm.ini
index 0b28881..f1252d9 100644
--- a/Settings/filament/Generic PET 1.75mm.ini	
+++ b/Settings/filament/Generic PET 1.75mm.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_colour = #B5F5FD
+filament_colour = #00BFF8000F00
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Generic PLA 1.75mm.ini b/Settings/filament/Generic PLA 1.75mm.ini
index 2aefa94..cbcfe4b 100644
--- a/Settings/filament/Generic PLA 1.75mm.ini	
+++ b/Settings/filament/Generic PLA 1.75mm.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_colour = #FF14E2
+filament_colour = #FF3232
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Primavalue PVA.ini b/Settings/filament/Primavalue PVA.ini
index 94c416d..1974e8e 100644
--- a/Settings/filament/Primavalue PVA.ini	
+++ b/Settings/filament/Primavalue PVA.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 100
-filament_colour = #FFD1A4
+filament_colour = #FFFFD7
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Prusa HIPS 1.75mm.ini b/Settings/filament/Prusa HIPS 1.75mm.ini
index 85ecb97..96d00b4 100644
--- a/Settings/filament/Prusa HIPS 1.75mm.ini	
+++ b/Settings/filament/Prusa HIPS 1.75mm.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 0.9
 fan_always_on = 1
 fan_below_layer_time = 10
-filament_colour = #FFE130
+filament_colour = #FFFFD7
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Prusa PET 1.75mm.ini b/Settings/filament/Prusa PET 1.75mm.ini
index 0b28881..32f0ce5 100644
--- a/Settings/filament/Prusa PET 1.75mm.ini	
+++ b/Settings/filament/Prusa PET 1.75mm.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 20
-filament_colour = #B5F5FD
+filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Prusa PLA 1.75mm.ini b/Settings/filament/Prusa PLA 1.75mm.ini
index ae95666..3ffa73a 100644
--- a/Settings/filament/Prusa PLA 1.75mm.ini	
+++ b/Settings/filament/Prusa PLA 1.75mm.ini	
@@ -1,4 +1,4 @@
-# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 10:02:42
+# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 11:35:01
 bed_temperature = 60
 bridge_fan_speed = 100
 compatible_printers = 
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_colour = #FF14E2
+filament_colour = #FF3232
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Taulman T-Glase 1.75mm.ini b/Settings/filament/Taulman T-Glase 1.75mm.ini
index 1dc6bf0..53bb6d1 100644
--- a/Settings/filament/Taulman T-Glase 1.75mm.ini	
+++ b/Settings/filament/Taulman T-Glase 1.75mm.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 20
-filament_colour = #FD0200
+filament_colour = #FF8000
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Verbatim BVOH.ini b/Settings/filament/Verbatim BVOH.ini
index 8660924..4efbab7 100644
--- a/Settings/filament/Verbatim BVOH.ini	
+++ b/Settings/filament/Verbatim BVOH.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 0
 fan_below_layer_time = 100
-filament_colour = #FF14E2
+filament_colour = #FFFFD7
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75
diff --git a/Settings/filament/Verbatim PP.ini b/Settings/filament/Verbatim PP.ini
index 4404be6..7c0fd93 100644
--- a/Settings/filament/Verbatim PP.ini	
+++ b/Settings/filament/Verbatim PP.ini	
@@ -8,7 +8,7 @@ end_filament_gcode = "; Filament-specific end gcode"
 extrusion_multiplier = 1
 fan_always_on = 1
 fan_below_layer_time = 100
-filament_colour = #FF14E2
+filament_colour = #DEE0E6
 filament_cost = 0
 filament_density = 0
 filament_diameter = 1.75