Add files via upload

Slic3r settings MK2/filament/E3D Edge.ini

@@ -0,0 +1,26 @@
+# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:47:49 2017
+bed_temperature = 90
+bridge_fan_speed = 50
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #B5F5FD
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
+first_layer_bed_temperature = 85
+first_layer_temperature = 230
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n"
+temperature = 240

Slic3r settings MK2/filament/Generic ABS 1.75mm.ini

@@ -0,0 +1,26 @@
+# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:46:29 2017
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #3A80CA
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = ABS
+first_layer_bed_temperature = 100
+first_layer_temperature = 255
+max_fan_speed = 30
+min_fan_speed = 10
+min_print_speed = 5
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n"
+temperature = 255

Slic3r settings MK2/filament/Generic PET 1.75mm.ini

@@ -0,0 +1,26 @@
+# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:43:21 2017
+bed_temperature = 90
+bridge_fan_speed = 50
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #B5F5FD
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PET
+first_layer_bed_temperature = 85
+first_layer_temperature = 230
+max_fan_speed = 50
+min_fan_speed = 30
+min_print_speed = 5
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\n"
+temperature = 240

Slic3r settings MK2/filament/Generic PLA 1.75mm.ini

@@ -0,0 +1,26 @@
+# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:42:47 2017
+bed_temperature = 55
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF14E2
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_max_volumetric_speed = 0
+filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+filament_settings_id = 
+filament_soluble = 0
+filament_type = PLA
+first_layer_bed_temperature = 55
+first_layer_temperature = 215
+max_fan_speed = 100
+min_fan_speed = 85
+min_print_speed = 15
+slowdown_below_layer_time = 25
+start_filament_gcode = "; Filament gcode\n"
+temperature = 210