Add PapapiuLab N1 3D printer

live/PapapiuLab/0.1.0.ini

@@ -0,0 +1,510 @@
+# Print profiles for Papapiu printers.
+# Based on the profiles from PR: https://github.com/slic3r/slic3r-profiles/pull/13 by top-gun.
+# The graphics for the bed (SVG) was created by PwnCNC and published on Thingiverse under the Creative Commons Attribution license: https://www.thingiverse.com/thing:4861532/files
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Papapiu
+config_version = 0.1.0
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/PapapiuLab/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:Papapiu_N1S]
+name = Papapiu N1S
+variants = 0.4
+technology = FFF
+bed_model = N1_Bed.stl
+bed_texture = N1_Texture.png
+default_materials = "Generic PLA @Papapiu"; Generic PETG HF @Papapiu; Generic PLA @Papapiu; Esun ePA-CF @Papapiu; Generic ABS @Papapiu; Generic TPU @Papapiu
+
+[print:*common*]
+compatible_printers_condition = printer_model=~/(Papapiu_N1S).*/
+allow_empty_layers = 0
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+extra_perimeters = 0
+bottom_solid_layers = 8
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_speed = 60
+brim_offset = 0
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+complete_objects_one_skirt = 0
+complete_objects_sort = object
+default_acceleration = 12000
+dont_support_bridges = 1
+draft_shield = 0
+ensure_vertical_shell_thickness = 1
+exact_last_layer_height = 0
+external_perimeter_extrusion_width = 0.4
+external_perimeter_speed = 90%
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+extrusion_width = 0.4
+fill_angle = 45
+fill_density = 15%
+fill_pattern = cubic
+first_layer_acceleration = 3000
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 100
+gap_fill = 1
+gap_fill_speed = 50
+gcode_comments = 0
+gcode_label_objects = 1
+infill_acceleration = 12000
+infill_anchor = 600%
+infill_anchor_max = 5
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.4
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 18%
+infill_speed = 150
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.15
+max_print_speed = 300
+max_volumetric_speed = 12
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{print_time}.gcode
+perimeter_acceleration = 12000
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.4
+perimeter_speed = 120
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+skirt_distance = 10
+skirt_height = 1
+skirts = 2
+slice_closing_radius = 0.049
+small_perimeter_speed = 25
+solid_fill_pattern = rectilinear
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.4
+solid_infill_speed = 80%
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_buildplate_only = 1
+support_material_contact_distance_bottom = 0.2
+support_material_contact_distance_top = 0.2
+support_material_extruder = 0
+support_material_extrusion_width = 0.38
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_solid_first_layer = 0
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 65
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 60%
+top_solid_layers = 8
+top_solid_min_thickness = 0
+travel_speed = 250
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+elefant_foot_compensation = 0.1
+
+[print:*0.15mm*]
+bottom_solid_layers = 7
+top_solid_layers = 7
+layer_height = 0.15
+bridge_flow_ratio = 0.7
+max_print_speed = 250
+solid_infill_speed = 80%
+
+[print:*0.2mm*]
+bottom_solid_layers = 5
+top_solid_layers = 5
+layer_height = 0.2
+bridge_flow_ratio = 0.8
+
+[print:0.15mm NORMAL @Papapiu]
+inherits = *common*; *0.15mm*
+max_print_speed = 300
+bottom_solid_layers = 8
+top_solid_layers = 8
+
+[print:0.15mm FAST @Papapiu]
+inherits = *common*; *0.15mm*
+compatible_printers_condition = printer_model=~/(Papapiu_N1S).*/
+external_perimeter_speed = 140
+first_layer_infill_speed = 60
+first_layer_speed = 100
+gap_fill_speed = 50
+infill_speed = 230
+ironing_speed = 15
+max_print_speed = 300
+max_volumetric_speed = 25
+perimeter_speed = 160
+small_perimeter_speed = 25
+solid_infill_speed = 80%
+top_solid_infill_speed = 60%
+fill_pattern = cubic
+
+[print:0.20mm NORMAL @Papapiu]
+inherits = *common*; *0.2mm*
+fill_pattern = cubic
+external_perimeter_speed = 120
+infill_speed = 160
+compatible_printers_condition = printer_model=~/(Papapiu_N1S).*/
+
+[print:0.20mm FAST @Papapiu]
+inherits = 0.15mm FAST @Papapiu; *0.2mm*
+compatible_printers_condition = printer_model=~/(Papapiu_N1S).*/
+external_perimeter_speed = 140
+first_layer_infill_speed = 60
+first_layer_speed = 100
+gap_fill_speed = 50
+infill_speed = 230
+ironing_speed = 15
+max_print_speed = 300
+max_volumetric_speed = 25
+perimeter_speed = 160
+small_perimeter_speed = 25
+solid_infill_speed = 80%
+top_solid_infill_speed = 60%
+
+
+# Common printer preset
+[printer:*common*]
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n;{if layer_num == 2 }SET_FILAMENT_SENSOR SENSOR=my_sensor ENABLE=1{endif}\n\n
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = "Generic PLA @Papapiu"
+default_print_profile = "0.20mm NORMAL @Papapiu"
+deretract_speed = 40
+end_gcode = PRINT_END
+extra_loading_move = -2
+extruder_colour = ""
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]\n
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 9000
+machine_max_acceleration_retracting = 9000
+machine_max_acceleration_travel = 12000,12000
+machine_max_acceleration_x = 12000
+machine_max_acceleration_y = 12000
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 5
+machine_max_jerk_y = 5
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+min_layer_height = 0.05
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = M601
+print_host = 
+printer_notes = ""
+remaining_times = 1
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M104 S0\nM140 S0\nPRINT_START BED={first_layer_bed_temperature[0]} EXTRUDER={first_layer_temperature[0]}
+thumbnails = 64x64,400x300
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+
+
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.3
+min_layer_height = 0.05
+retract_lift_above = 0.2
+printer_variant = 0.4
+
+[printer:Papapiu N1S]
+inherits = *common*; *0.4nozzle*
+bed_shape = 0x0,299x0,299x300,0x300
+max_print_height = 360
+printer_model = Papapiu_N1S
+
+
+[filament:Generic ABS @Papapiu]
+filament_vendor = Generic
+filament_type = ABS
+bed_temperature = 105
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.98
+fan_always_on = 0
+fan_below_layer_time = 10
+filament_colour = #3A80CA
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 18
+filament_density = 1.04
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_speed = 0
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_layer_change = 0
+filament_retract_length = 0.7
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = 1
+first_layer_bed_temperature = 108
+first_layer_temperature = 248
+full_fan_speed_layer = 0
+max_fan_speed = 30
+min_fan_speed = 20
+min_print_speed = 25
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\nSET_GCODE_OFFSET Z=0.0\nSET_PRESSURE_ADVANCE ADVANCE=0.03"
+temperature = 243
+
+[filament:Generic PETG @Papapiu]
+filament_vendor = Generic
+filament_type = PETG
+bed_temperature = 80
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.94
+fan_always_on = 1
+fan_below_layer_time = 10
+filament_colour = #FF8000
+filament_cost = 20
+filament_density = 1.27
+filament_diameter = 1.75
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_speed = 0
+filament_max_volumetric_speed = 11
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_layer_change = 1
+filament_retract_length = 1.2
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = 1
+first_layer_bed_temperature = 80
+first_layer_temperature = 240
+full_fan_speed_layer = 0
+max_fan_speed = 100
+min_fan_speed = 40
+min_print_speed = 15
+slowdown_below_layer_time = 10
+start_filament_gcode = "; Filament gcode\nSET_GCODE_OFFSET Z=0\nSET_PRESSURE_ADVANCE ADVANCE=0.05"
+temperature = 235
+
+
+[filament:Generic PLA @Papapiu]
+filament_vendor = Generic
+filament_type = PLA
+bed_temperature = 65
+bridge_fan_speed = 100
+cooling = 0
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 0.89
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 20
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_speed = 0
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_length = 0.6
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+first_layer_bed_temperature = 68
+first_layer_temperature = 205
+full_fan_speed_layer = 4
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 15
+start_filament_gcode = "; Filament gcode\nSET_GCODE_OFFSET Z=0\nSET_PRESSURE_ADVANCE ADVANCE=0.05"
+temperature = 195
+
+[filament:Generic TPU @Papapiu]
+inherits = Generic PLA @Papapiu
+bed_temperature = 30
+bridge_fan_speed = 100
+bridge_internal_fan_speed = -1
+chamber_temperature = 0
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 0
+disable_fan_first_layers = 2
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+external_perimeter_fan_speed = -1
+extrusion_multiplier = 0.89
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #FF00FF
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cooling_zone_pause = 0
+filament_cost = 20
+filament_custom_variables = ""
+filament_density = 1.24
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_dip_extraction_speed = 70
+filament_dip_insertion_speed = 33
+filament_enable_toolchange_part_fan = 0
+filament_enable_toolchange_temp = 0
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_overlap = 100%
+filament_max_speed = 0
+filament_max_volumetric_speed = 5
+filament_max_wipe_tower_speed = 0
+filament_melt_zone_pause = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = "This is a profile for TPU95A. It was tested with Anycubic TPU95A, but most of the economy TPU filaments behave pretty similar.\n\nYou will want to optimize the temperature. Even different colors of the same brand can require 10° more or less.\n\nIf you experience clogs or grinding, reduce the maximum volumetric speed!"
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = 1
+filament_retract_lift = 0.1
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_seam_gap = nil
+filament_shrink = 100%
+filament_skinnydip_distance = 31
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_toolchange_part_fan_speed = 50
+filament_toolchange_temp = 200
+filament_type = FLEX
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_use_fast_skinnydip = 0
+filament_use_skinnydip = 0
+filament_vendor = Generic
+filament_wipe = nil
+filament_wipe_advanced_pigment = 0.5
+filament_wipe_extra_perimeter = nil
+filament_wipe_only_crossing = nil
+filament_wipe_speed = nil
+first_layer_bed_temperature = 30
+first_layer_temperature = 220
+full_fan_speed_layer = 4
+max_fan_speed = 100
+max_speed_reduction = 95%
+min_fan_speed = 100
+min_print_speed = 10
+slowdown_below_layer_time = 8
+start_filament_gcode = "; Filament gcode\nSET_GCODE_OFFSET Z=0\nSET_PRESSURE_ADVANCE ADVANCE=0.1"
+temperature = 220
+top_fan_speed = -1

live/PapapiuLab/index.idx

@@ -0,0 +1,2 @@
+min_slic3r_version = 2.6.0-alpha1
+0.1.0 Initial version