mirror of
https://github.com/prusa3d/Slic3r-settings.git
synced 2025-09-01 00:41:47 +02:00
40 lines
2.6 KiB
INI
40 lines
2.6 KiB
INI
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:47:43
|
|
bed_shape = 0x0,250x0,250x210,0x210
|
|
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
|
|
between_objects_gcode =
|
|
deretract_speed = 50,50,50,50
|
|
end_gcode = {if not has_wipe_tower}\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n
|
|
extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
|
|
extruder_offset = 0x0,0x0,0x0,0x0
|
|
gcode_flavor = reprap
|
|
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
|
|
max_layer_height = 0.25,0.25,0.25,0.25
|
|
min_layer_height = 0.07,0.07,0.07,0.07
|
|
nozzle_diameter = 0.6,0.6,0.6,0.6
|
|
octoprint_apikey =
|
|
octoprint_host =
|
|
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
|
|
printer_settings_id =
|
|
retract_before_travel = 3,3,3,3
|
|
retract_before_wipe = 60%,60%,60%,60%
|
|
retract_layer_change = 0,0,0,0
|
|
retract_length = 4,4,4,4
|
|
retract_length_toolchange = 4,4,4,4
|
|
retract_lift = 0.6,0.6,0.6,0.6
|
|
retract_lift_above = 0,0,0,0
|
|
retract_lift_below = 199,199,199,199
|
|
retract_restart_extra = 0,0,0,0
|
|
retract_restart_extra_toolchange = 0,0,0,0
|
|
retract_speed = 80,80,80,80
|
|
serial_port =
|
|
serial_speed = 250000
|
|
single_extruder_multi_material = 1
|
|
start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
|
|
toolchange_gcode =
|
|
use_firmware_retraction = 0
|
|
use_relative_e_distances = 1
|
|
use_volumetric_e = 0
|
|
variable_layer_height = 0
|
|
wipe = 1,1,1,1
|
|
z_offset = 0
|