Due to some changes on the WP.com side to compress the requested images on the fly, the exact image size in the response could be different between platforms.
This commit aims to make the affected tests more reliable.
Follow-up to [139/tests], [31258], [34568], [47142], [57903], [57904], [57924].
Props peterwilsoncc, jorbin.
See #60865.
git-svn-id: https://develop.svn.wordpress.org/trunk@57931 602fd350-edb4-49c9-b593-d223f7449a82
This adds an `is_dir()` check in `_get_block_templates_paths` before trying to run a `RecursiveDirectoryIterator` to avoid errors being reported in New Relic even thought the errors should be handled by a try/catch block.
Follow-up to [57215].
Props iCaleb, sean212, mukesh27, joemcgill.
Fixes#60915.
git-svn-id: https://develop.svn.wordpress.org/trunk@57928 602fd350-edb4-49c9-b593-d223f7449a82
Since WordPress 6.5, the minimum supported version of MySQL and MariaDB is 5.5.5. This means all supported database servers now support the `utf8mb4` character set and therefore the conditional logic for this is no longer necessary.
Props l1nuxjedi, craigfrancis, OllieJones, johnbillion
Fixes#60096
git-svn-id: https://develop.svn.wordpress.org/trunk@57926 602fd350-edb4-49c9-b593-d223f7449a82
Some plugins pass invalid values such as `null` instead of a string, which has never been supported by WordPress (no translations are loaded) and was technically undefined behavior. With the introduction of the new l10n library in #59656, which has stricter type hints, this could end up causing warnings or even fatal errors.
This change adds a deliberate short-circuit to `load_textdomain()` & co. to better handle such a case and document that it is not supported.
Props verygoode, swissspidy.
Fixes#60888.
git-svn-id: https://develop.svn.wordpress.org/trunk@57925 602fd350-edb4-49c9-b593-d223f7449a82
Follow-up to #60865 / [57903] where similar instances were recently updated due to an upstream change.
Particularly the `test_wp_crop_image_with_url()` test recently began to fail on some environments, likely because of the same change.
This updates the image URLs with the aim to bring more consistency and to get the test passing again more broadly.
Fixes#60907.
git-svn-id: https://develop.svn.wordpress.org/trunk@57924 602fd350-edb4-49c9-b593-d223f7449a82
Support pretty permalinks when FrankenPHP server is detected, which is built on top of Caddy. Caddy detection was added in [57612].
Props swissspidy, stephenmiracle.
Fixes#60884.
git-svn-id: https://develop.svn.wordpress.org/trunk@57923 602fd350-edb4-49c9-b593-d223f7449a82
Previously, when `WP_PLUGIN_DIR` was set to something other than `wp-content/plugins`, e.g. `wp-content/mods`, `load_script_textdomain` was searching for script translations in `wp-content/languages/mods`. However, that is incorrect, as `WP_PLUGIN_DIR` does not affect where translations are stored. The location is always `wp-content/languages/plugins`.
Props coreymckrill, swissspidy.
Fixes#60891.
git-svn-id: https://develop.svn.wordpress.org/trunk@57922 602fd350-edb4-49c9-b593-d223f7449a82
An excessive amount of autoloaded options is a common cause for slow database responses, sometimes caused by very large individual autoloaded options. As it is not mandatory to provide an autoload value when adding an option to the database, it tends to be ignored, which in combination with a default value of "yes" and lack of documentation can lead to the aforementioned problem.
This changeset enhances the option autoloading behavior in several ways:
* Update the function documentation to encourage the use of boolean `true` or `false` to explicitly provide an autoload value for an option.
* Use new string values `on` and `off` for explicitly provided values stored in the database, to distinguish them from `yes` and `no`, since `yes` does not allow determining whether it was set intentionally by the developer or only as a default.
* Effectively deprecate the values `yes` and `no`. They are still supported for backward compatibility, but now discouraged.
* Use `null` as new default autoload value for `add_option()`. If the developer does not provide an explicit value, this will now trigger WordPress logic to determine an autoload value to use:
* If WordPress determines that the option should not be autoloaded, it is stored in the database as `auto-off`. As part of this changeset, the single heuristic introduced for that is to check whether the option size is larger than a threshold of 150k bytes. This threshold is filterable via a new `wp_max_autoloaded_option_size` filter.
* If WordPress determines that the option should be autoloaded, it is stored in the database as `auto-on`. No logic to make such a decision is introduced as part of this changeset, but a new filter `wp_default_autoload_value` can be used to define such heuristics, e.g. by optimization plugins.
* If WordPress cannot determine whether or not to autoload the option, it is stored in the database as `auto`.
* This effectively means that any option without an explicit autoload value provided by the developer will be stored with an autoload value of `auto`, unless the option's size exceeds the aforementioned threshold. Options with a value of `auto` are still autoloaded as of today, most importantly for backward compatibility. A new function `wp_autoload_values_to_autoload()` returns the list of autolaod values that dictate for an option to be autoloaded, and a new filter `wp_autoload_values_to_autoload` can be used to alter that list.
These behavioral changes encourage developers to be more mindful of autoloading, while providing WordPress core and optimization plugins with additional control over heuristics for autoloading options where no explicit autoload value was provided.
At the same time, the changes are fully backward compatible from a functionality perspective, with the only exception being that very large options will now no longer be autoloaded if the developer did not explicitly request for them to be autoloaded. Neither WordPress core nor plugins are able to override an explicitly provided value, which is intentional to continue giving developers full control over their own options.
Props pbearne, flixos90, joemcgill, azaozz, spacedmonkey, swissspidy, mukesh27, markjaquith.
Fixes#42441.
git-svn-id: https://develop.svn.wordpress.org/trunk@57920 602fd350-edb4-49c9-b593-d223f7449a82
The `$context` argument passed to filters such as `hooked_block_types`, `hooked_block`, and `hooked_block_{$hooked_block_type}` allows them to conditionally insert a hooked block. If the anchor block is contained in a template or template part, `$context` will be set to a `WP_Block_Template` object reflecting that template or part.
The aforementioned filters are applied when hooked block insertion is run upon reading a template (or part) from the DB (and before sending the template/part content with hooked blocks inserted over the REST API to the client), but also upon writing to the DB, as that's when the `ignoredHookedBlocks` metadata attribute is set.
Prior to this changeset, the `$context` passed to Block Hooks related filters in the latter case reflected the template/part that was already stored in the database (if any), which is a bug; instead, it needs to reflect the template/part that will result from the incoming `POST` network request that will trigger a database update.
Those incoming changes are encapsulated in the `$changes` argument passed to the `reset_pre_insert_template` and `reset_pre_insert_template_part` filters, respectively, and thus to the `inject_ignored_hooked_blocks_metadata_attributes` function that is hooked to them. `$changes` is of type `stdClass` and only contains the fields that need to be updated. That means that in order to create a `WP_Block_Template` object, a two-step process is needed:
- Emulate what the updated `wp_template` or `wp_template_part` post object in the database will look like by merging `$changes` on top of the existing `$post` object fetched from the DB, or from the theme's block template (part) file, if any.
- Create a `WP_Block_Template` from the resulting object.
To achieve the latter, a new helper method (`_build_block_template_object_from_post_object`) is extracted from the existing `_build_block_template_result_from_post` function. (The latter cannot be used directly as it includes a few database calls that will fail if no post object for the template has existed yet in the database.)
While somewhat complicated to implement, the overall change allows for better separation of concerns and isolation of entities. This is visible e.g. in the fact that `inject_ignored_hooked_blocks_metadata_attributes` no longer requires a `$request` argument, which is reflected by unit tests no longer needing to create a `$request` object to pass to it, thus decoupling the function from the templates endpoint controller.
Unit tests for `inject_ignored_hooked_blocks_metadata_attributes` have been moved to a new, separate file. Test coverage has been added such that now, all three relevant scenarios are covered:
- The template doesn't exist in the DB, nor is there a block theme template file for it.
- The template doesn't exist in the DB, but there is a block theme template file for it.
- The template already exists in the DB.
Those scenarios also correspond to the logical branching inside `WP_REST_Templates_Controller::prepare_item_for_database`, which is where `inject_ignored_hooked_blocks_metadata_attributes` gets its data from.
Props tomjcafferkey, bernhard-reiter, gziolo, swissspidy.
Fixes#60754.
git-svn-id: https://develop.svn.wordpress.org/trunk@57919 602fd350-edb4-49c9-b593-d223f7449a82
Compose V2, which was first released in 2020, is included with all currently supported versions of Docker Desktop. Compose V1 stopped receiving updates in July 2023.
The biggest difference is that the command to interact with Compose changed from `docker-compose` to `docker compose`.
GitHub has now started removing V1 from Ubuntu & Windows images, which caused all Docker-based GitHub Actions workflows to fail.
This change migrates to the new `docker compose` command to address these failures.
Props swissspidy, thelovekesh.
Fixes#60901.
git-svn-id: https://develop.svn.wordpress.org/trunk@57918 602fd350-edb4-49c9-b593-d223f7449a82
The exact size in the response appears to differ between platforms, but this should make the tests pass for now.
Follow-up to [57903].
See #60865.
git-svn-id: https://develop.svn.wordpress.org/trunk@57904 602fd350-edb4-49c9-b593-d223f7449a82
It appears that something has changed on the WP.com side to compress the requested images on the fly, which interfered with the previous expectations in these tests.
This commit uses a direct file URL and updates the expected image size to match the currently returned response.
Follow-up to [139/tests], [31258], [47142].
Props dextorlobo, swissspidy, davidbaumwald, SergeyBiryukov.
See #60865.
git-svn-id: https://develop.svn.wordpress.org/trunk@57903 602fd350-edb4-49c9-b593-d223f7449a82
Currently the table block font size does not change in the editor or front-end. This ensures this is reflected in the table block.
Props sabernhardt, tahmidulkarim, sheulyshila.
Fixes#58074.
git-svn-id: https://develop.svn.wordpress.org/trunk@57897 602fd350-edb4-49c9-b593-d223f7449a82
The pullquote block wasn't reflecting text color added for quote and add citation text across the front and back of editor. This fixes that by adding ensuring whatever color is selected is shown in both
Props kajalgohel.
Fixes#56524.
git-svn-id: https://develop.svn.wordpress.org/trunk@57896 602fd350-edb4-49c9-b593-d223f7449a82
There wasn't enough padding and the spacing was deteriorating the more depth there was. This reflects the front now and respects background coloring. Impacts both types of lists although original reporting was just on one.
Props aezazshekh, krupalpanchal, multidots1896, kajalgohel, sabernhardt.
Fixes#56083.
git-svn-id: https://develop.svn.wordpress.org/trunk@57895 602fd350-edb4-49c9-b593-d223f7449a82
Creating a new user is redundant here, the fixture shared by other tests can be used instead.
Follow-up to [36617].
See #60705.
git-svn-id: https://develop.svn.wordpress.org/trunk@57892 602fd350-edb4-49c9-b593-d223f7449a82
This changeset put back the context parameter of the "Patterns" string which was previously removed to fix a translation issue without introducing a string change during WP 6.5 string freeze period.
Follow-up to [57864].
Props kebbet, narenin, nestea29950.
Fixes#60827.
git-svn-id: https://develop.svn.wordpress.org/trunk@57887 602fd350-edb4-49c9-b593-d223f7449a82
With this change default shadow presets are never shown for classic themes, and classic themes have no options for adding custom ones.
This essentially reverts [57717] and [57827] / [57828], which had unintended consequences.
Props ajlende, oandregal, madhudollu, swissspidy, get_dave, andrewserong, desrosj.
Fixes#60815.
git-svn-id: https://develop.svn.wordpress.org/trunk@57885 602fd350-edb4-49c9-b593-d223f7449a82
Addresses a regression introduced in [57605] where the “Select” button in the media modal was not clickable anymore due to an overlaid element.
Props ramonopoly, swissspidy, freewebmentor.
Fixes#33049.
git-svn-id: https://develop.svn.wordpress.org/trunk@57881 602fd350-edb4-49c9-b593-d223f7449a82
Relocate the upload of font files uploaded via the Font Library feature to the `wp-content/uploads/fonts` (or multisite equivalent) directory.
This accounts for immutable file systems in which directories are unable to be created within `wp-content` and deploy processes which require special consideration of the `uploads` directory to ensure it remains persistent between deploys.
Props azaozz, burnuser, cbirdsong, christopherplus, costdev, davidbaumwald, desrosj, elrae, euthelup, get_dave, grantmkin, hellofromtonya, janthiel, jazzs3quence, johnbillion, jorbin, justlevine, kraftner, matveb, mcsf, mmaattiiaass, nico23, peterwilsoncc, priethor, rmccue, samuelsidler, swissspidy, youknowriad.
Fixes#60845.
git-svn-id: https://develop.svn.wordpress.org/trunk@57878 602fd350-edb4-49c9-b593-d223f7449a82
Updates the font size for `<code>` tags and updates several translatable strings.
Props sabernhardt, laurlittle, SergeyBiryukov.
See #60303.
git-svn-id: https://develop.svn.wordpress.org/trunk@57870 602fd350-edb4-49c9-b593-d223f7449a82
This modifies the font directory API to more closely reflect the upload directory API to help account for naive filtering when uploading fonts.
This moves the protection of infinite loops to the new function `_wp_filter_font_directory()` to allow developers extending and maintaining the font library to apply the filter without the need for a closure.
These changes also ensure both the `upload_dir` and `font_dir` filter are applied consistently when both creating and deleting fonts faces. Prior to this commit the `upload_dir` filter was only fired when creating fonts faces via the REST API.
Applying the font directory filter to the `upload_dir` filter is now done by adding the `_wp_filter_font_directory` function rather than `wp_get_font_dir()`. Developers who have previously modified the font upload directory using the `font_dir` filter will NOT need to upload their code.
Extenders wishing to upload files to the font directory can do so via the code:
{{{#!php
<?php
add_filter( 'upload_dir', '_wp_filter_font_directory' );
// Your code to upload or sideload a font file.
remove_filter( 'upload_dir', '_wp_filter_font_directory' );
}}}
Introduces:
* `wp_font_dir()`: Attempt to create and retrieve the font upload directory. The equivalent to `wp_upload_dir()`.
* `_wp_filter_font_directory()`: To run on the `upload_dir` filter, this sets the default destination of the fonts directory and fires the `font_dir` filter.
`wp_get_font_dir()` has been modified to be a lightweight getter for the font directory. It returns the location without attempting to create it. The equivalent to `wp_get_upload_dir()`.
Follow up to [57740].
Props peterwilsoncc, mukesh27, mikachan, costdev, mmaattiiaass, swissspidy, youknowriad, dd32, grantmkin.
Fixes#60652.
git-svn-id: https://develop.svn.wordpress.org/trunk@57868 602fd350-edb4-49c9-b593-d223f7449a82
Prevents an error when uploading fonts on certain systems, because the `mbstring` extension can be missing and thus the function may not be available.
Props mujuonly, swissspidy, peterwilsoncc.
Fixes#60823.
See #55603.
git-svn-id: https://develop.svn.wordpress.org/trunk@57865 602fd350-edb4-49c9-b593-d223f7449a82
This changeset updates a translation string to ensure the "Patterns" menu item introduced in [57543] is translatable.
This quickfix simply removes the erroneous `context` parameter so no new string is introduced during WP 6.5 string freeze period. A follow-up changeset will be needed to replace the current `__()` function with `_x()` and put back the `context` parameter.
Follow-up to [57543].
Props jdy68, audrasjb, kebbet, swissspidy.
Fixes#60825.
git-svn-id: https://develop.svn.wordpress.org/trunk@57864 602fd350-edb4-49c9-b593-d223f7449a82
One of the tests for the `wp_kses_xml_named_entities()` function used `utf8_encode( chr( 160 ) )` to set an expectation of a Unicode character for a non-breaking space.
It is understandable that this expectation was previously set this way, as it is not possible for a developer to distinguish between a ''breaking'' space and a ''non-breaking'' space visually, so the chances of the test accidentally breaking on an incorrect save when the plain Unicode character would be used, was high.
However, the `utf8_encode()` function is deprecated as of PHP 8.2, and its use needs to be removed from the WP codebase.
PHP 7.0 has introduced [https://wiki.php.net/rfc/unicode_escape Unicode escape sequences], which allows to create a text string using Unicode characters referenced by their codepoint. By switching the test case to provide the test expectation using a Unicode escape sequence, we remove the use of the deprecated PHP function and still preserve the safeguard against the test accidentally breaking.
Follow-up to [52229].
Props jrf, afercia, poena, SergeyBiryukov.
See #55603, #60705.
git-svn-id: https://develop.svn.wordpress.org/trunk@57861 602fd350-edb4-49c9-b593-d223f7449a82
