openscad/BOSL2
1
0
Fork 0
mirror of https://github.com/revarbat/BOSL2.git synced 2025-08-31 08:15:53 +02:00
Code Issues Projects Releases Wiki Activity

doc fixes

Browse Source
This commit is contained in:
Adrian Mariano
2024-11-06 19:02:45 -05:00
parent 785bfb69de
commit 9098469088
2 changed files with 11 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

8
joiners.scad
View File

@@ -1223,6 +1223,8 @@ module rabbit_clip(type, length, width, snap, thickness, depth, compression=0.1
// Section: Splines
// Module: hirth()
// Synopsis: Creates a Hirth face spline that locks together two cylinders.
// Syntags: Geom
// Usage:
// hirth(n, ir|id=, or|od=, tooth_angle, [cone_angle=], [chamfer=], [rounding=], [base=], [crop=], [anchor=], [spin=], [orient=]
// Description:
@@ -1232,7 +1234,7 @@ module rabbit_clip(type, length, width, snap, thickness, depth, compression=0.1
// Each tooth is a triangle that grows larger with radius. You specify a nominal tooth angle; the actual tooth
// angle will be slightly different.
// .
// You can also specify a cone_angle which raises or lowers the angle of the teeth. When you do this you ened to
// You can also specify a cone_angle which raises or lowers the angle of the teeth. When you do this you need to
// mate splines with opposite angles such as -20 and +20. The splines appear centered at the origin so that two
// splines will mate if their centers coincide. Therefore `attach(CENTER,CENTER)` will produce two mating splines
// assuming that they are rotated correctly. The bottom anchors will be at the bottom of the spline base. The top
@@ -1249,7 +1251,7 @@ module rabbit_clip(type, length, width, snap, thickness, depth, compression=0.1
// based on the unchamfered dimensions.
// .
// By default the teeth are symmetric, which is ideal for registration and for situations where loading may occur in either
// direction. The skew parameter will skew the teeth by the specified amount, where a skew of <EFBFBD>1 gives a tooth with a vertical
// direction. The skew parameter will skew the teeth by the specified amount, where a skew of ±1 gives a tooth with a vertical
// side either on the left or the right. Intermediate values will produce partially skewed teeth. Note that the skew
// applies after the tooth profile is computed with the specified tooth_angle, which means that the skewed tooth will
// have an altered tooth angle from the one specified.
@@ -1302,7 +1304,7 @@ module rabbit_clip(type, length, width, snap, thickness, depth, compression=0.1
// hirth(26,20,50, tooth_angle=60,base=2,cone_angle=-30, chamfer=.05, rot=true);
// Example(3D,NoScale): Using skew to create teeth with vertical faces
// hirth(17,20,50,skew=-1, base=5, chamfer=0.05);
// Example(3D,NoScale): If you want to change how tall the teeth are you do that by chaging the tooth angle. Increasing the tooth angle makes the teeth shorter:
// Example(3D,NoScale): If you want to change how tall the teeth are you do that by changing the tooth angle. Increasing the tooth angle makes the teeth shorter:
// hirth(17,20,50,tooth_angle=120,skew=0, base=5, rounding=0.05, crop=true);
module hirth(n, ir, or, id, od, tooth_angle=60, cone_angle=0, chamfer, rounding, base=1, crop=false,skew=0, rot=false, orient,anchor,spin)