mirror of
https://github.com/revarbat/BOSL2.git
synced 2025-08-16 18:34:12 +02:00
Massive reworking of documentation production.
This commit is contained in:
Revar Desmera
461
joiners.scad
461
joiners.scad
@@ -1,5 +1,11 @@
|
||||
//////////////////////////////////////////////////////////////////////
|
||||
// Snap-together joiners
|
||||
// LibFile: joiners.scad
|
||||
// Snap-together joiners.
|
||||
// To use, add the following lines to the beginning of your file:
|
||||
// ```
|
||||
// include <BOSL/constants.scad>
|
||||
// use <BOSL/joiners.scad>
|
||||
// ```
|
||||
//////////////////////////////////////////////////////////////////////
|
||||
|
||||
/*
|
||||
@@ -31,180 +37,421 @@ OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
|
||||
include <transforms.scad>
|
||||
use <transforms.scad>
|
||||
use <shapes.scad>
|
||||
include <compat.scad>
|
||||
include <constants.scad>
|
||||
|
||||
|
||||
module half_joiner_clear(h=20, w=10, a=30, clearance=0)
|
||||
// Section: Half Joiners
|
||||
|
||||
|
||||
// Module: half_joiner_clear()
|
||||
// Description:
|
||||
// Creates a mask to clear an area so that a half_joiner can be placed there.
|
||||
// Usage:
|
||||
// half_joiner_clear(h, w, [a], [clearance], [overlap], [orient], [align])
|
||||
// Arguments:
|
||||
// h = Height of the joiner to clear space for.
|
||||
// w = Width of the joiner to clear space for.
|
||||
// a = Overhang angle of the joiner.
|
||||
// clearance = Extra width to clear.
|
||||
// overlap = Extra depth to clear.
|
||||
// orient = Orientation of the shape. Use the `ORIENT_` constants from `constants.scad`. Default: `ORIENT_Y`.
|
||||
// align = Alignment of the shape by the axis-negative (size1) end. Use the `V_` constants from `constants.scad`. Default: `V_CENTER`.
|
||||
// Example:
|
||||
// half_joiner_clear(orient=ORIENT_X);
|
||||
module half_joiner_clear(h=20, w=10, a=30, clearance=0, overlap=0.01, orient=ORIENT_Y, align=V_CENTER)
|
||||
{
|
||||
dmnd_height = h*1.0;
|
||||
dmnd_width = dmnd_height*tan(a);
|
||||
guide_size = w/3;
|
||||
guide_width = 2*(dmnd_height/2-guide_size)*tan(a);
|
||||
|
||||
difference() {
|
||||
// Diamonds.
|
||||
scale([w+clearance, dmnd_width/2, dmnd_height/2]) {
|
||||
xrot(45) cube(size=[1,sqrt(2),sqrt(2)], center=true);
|
||||
}
|
||||
// Blunt point of tab.
|
||||
grid_of(ya=[-(guide_width/2+2), (guide_width/2+2)]) {
|
||||
cube(size=[(w+clearance)*1.05, 4, h*0.99], center=true);
|
||||
}
|
||||
}
|
||||
}
|
||||
//half_joiner_clear();
|
||||
|
||||
|
||||
|
||||
module half_joiner(h=20, w=10, l=10, a=30, screwsize=undef, guides=true, slop=printer_slop)
|
||||
{
|
||||
dmnd_height = h*1.0;
|
||||
dmnd_width = dmnd_height*tan(a);
|
||||
guide_size = w/3;
|
||||
guide_width = 2*(dmnd_height/2-guide_size)*tan(a);
|
||||
|
||||
difference() {
|
||||
union() {
|
||||
// Make base.
|
||||
orient_and_align([w, guide_width, h], orient, align, orig_orient=ORIENT_Y) {
|
||||
yspread(overlap, n=overlap>0? 2 : 1) {
|
||||
difference() {
|
||||
// Solid backing base.
|
||||
translate([0,-l/2,0])
|
||||
cube(size=[w, l, h], center=true);
|
||||
|
||||
// Clear diamond for tab
|
||||
grid_of(xa=[-(w*2/3), (w*2/3)]) {
|
||||
half_joiner_clear(h=h+0.01, w=w, clearance=slop*2, a=a);
|
||||
// Diamonds.
|
||||
scale([w+clearance, dmnd_width/2, dmnd_height/2]) {
|
||||
xrot(45) cube(size=[1,sqrt(2),sqrt(2)], center=true);
|
||||
}
|
||||
}
|
||||
|
||||
difference() {
|
||||
// Make tab
|
||||
scale([w/3-slop*2, dmnd_width/2, dmnd_height/2]) xrot(45)
|
||||
cube(size=[1,sqrt(2),sqrt(2)], center=true);
|
||||
|
||||
// Blunt point of tab.
|
||||
translate([0,guide_width/2+2,0])
|
||||
cube(size=[w*0.99,4,guide_size*2], center=true);
|
||||
}
|
||||
|
||||
|
||||
// Guide ridges.
|
||||
if (guides == true) {
|
||||
xspread(w/3-slop*2) {
|
||||
// Guide ridge.
|
||||
fwd(0.05/2) {
|
||||
scale([0.75, 1, 2]) yrot(45)
|
||||
cube(size=[guide_size/sqrt(2), guide_width+0.05, guide_size/sqrt(2)], center=true);
|
||||
}
|
||||
|
||||
// Snap ridge.
|
||||
scale([0.25, 0.5, 1]) zrot(45)
|
||||
cube(size=[guide_size/sqrt(2), guide_size/sqrt(2), dmnd_width], center=true);
|
||||
yspread(guide_width+4) {
|
||||
cube(size=[(w+clearance)*1.05, 4, h*0.99], center=true);
|
||||
}
|
||||
}
|
||||
}
|
||||
if (overlap>0) cube([w+clearance, overlap+0.001, h], center=true);
|
||||
}
|
||||
}
|
||||
|
||||
// Make screwholes, if needed.
|
||||
if (screwsize != undef) {
|
||||
yrot(90) cylinder(r=screwsize*1.1/2, h=w+1, center=true, $fn=12);
|
||||
|
||||
|
||||
// Module: half_joiner()
|
||||
// Usage:
|
||||
// half_joiner(h, w, l, [a], [screwsize], [guides], [slop], [orient], [align])
|
||||
// Description:
|
||||
// Creates a half_joiner object that can be attached to half_joiner2 object.
|
||||
// Arguments:
|
||||
// h = Height of the half_joiner.
|
||||
// w = Width of the half_joiner.
|
||||
// l = Length of the backing to the half_joiner.
|
||||
// a = Overhang angle of the half_joiner.
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// slop = Printer specific slop value to make parts fit more closely.
|
||||
// orient = Orientation of the shape. Use the `ORIENT_` constants from `constants.scad`. Default: `ORIENT_Y`.
|
||||
// align = Alignment of the shape by the axis-negative (size1) end. Use the `V_` constants from `constants.scad`. Default: `V_CENTER`.
|
||||
// Example:
|
||||
// half_joiner(screwsize=3, orient=ORIENT_X);
|
||||
module half_joiner(h=20, w=10, l=10, a=30, screwsize=undef, guides=true, slop=PRINTER_SLOP, orient=ORIENT_Y, align=V_CENTER)
|
||||
{
|
||||
dmnd_height = h*1.0;
|
||||
dmnd_width = dmnd_height*tan(a);
|
||||
guide_size = w/3;
|
||||
guide_width = 2*(dmnd_height/2-guide_size)*tan(a);
|
||||
|
||||
if ($children > 0) {
|
||||
difference() {
|
||||
children();
|
||||
half_joiner_clear(h=h, w=w, a=a, clearance=0.1, overlap=0.01, orient=orient, align=align);
|
||||
}
|
||||
}
|
||||
render(convexity=12)
|
||||
orient_and_align([w, 2*l, h], orient, align, orig_orient=ORIENT_Y) {
|
||||
difference() {
|
||||
union() {
|
||||
// Make base.
|
||||
difference() {
|
||||
// Solid backing base.
|
||||
fwd(l/2) cube(size=[w, l, h], center=true);
|
||||
|
||||
// Clear diamond for tab
|
||||
grid3d(xa=[-(w*2/3), (w*2/3)]) {
|
||||
half_joiner_clear(h=h+0.01, w=w, clearance=slop*2, a=a);
|
||||
}
|
||||
}
|
||||
|
||||
difference() {
|
||||
// Make tab
|
||||
scale([w/3-slop*2, dmnd_width/2, dmnd_height/2]) xrot(45)
|
||||
cube(size=[1,sqrt(2),sqrt(2)], center=true);
|
||||
|
||||
// Blunt point of tab.
|
||||
back(guide_width/2+2)
|
||||
cube(size=[w*0.99,4,guide_size*2], center=true);
|
||||
}
|
||||
|
||||
|
||||
// Guide ridges.
|
||||
if (guides == true) {
|
||||
xspread(w/3-slop*2) {
|
||||
// Guide ridge.
|
||||
fwd(0.05/2) {
|
||||
scale([0.75, 1, 2]) yrot(45)
|
||||
cube(size=[guide_size/sqrt(2), guide_width+0.05, guide_size/sqrt(2)], center=true);
|
||||
}
|
||||
|
||||
// Snap ridge.
|
||||
scale([0.25, 0.5, 1]) zrot(45)
|
||||
cube(size=[guide_size/sqrt(2), guide_size/sqrt(2), dmnd_width], center=true);
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
// Make screwholes, if needed.
|
||||
if (screwsize != undef) {
|
||||
yrot(90) cylinder(r=screwsize*1.1/2, h=w+1, center=true, $fn=12);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
//half_joiner(screwsize=3);
|
||||
//half_joiner(screwsize=3, orient=ORIENT_Z, align=V_UP);
|
||||
|
||||
|
||||
|
||||
module half_joiner2(h=20, w=10, l=10, a=30, screwsize=undef, guides=true)
|
||||
// Module: half_joiner2()
|
||||
// Usage:
|
||||
// half_joiner2(h, w, l, [a], [screwsize], [guides], [orient], [align])
|
||||
// Description:
|
||||
// Creates a half_joiner2 object that can be attached to half_joiner object.
|
||||
// Arguments:
|
||||
// h = Height of the half_joiner.
|
||||
// w = Width of the half_joiner.
|
||||
// l = Length of the backing to the half_joiner.
|
||||
// a = Overhang angle of the half_joiner.
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// orient = Orientation of the shape. Use the `ORIENT_` constants from `constants.scad`. Default: `ORIENT_Y`.
|
||||
// align = Alignment of the shape by the axis-negative (size1) end. Use the `V_` constants from `constants.scad`. Default: `V_CENTER`.
|
||||
// Example:
|
||||
// half_joiner2(screwsize=3, orient=ORIENT_X);
|
||||
module half_joiner2(h=20, w=10, l=10, a=30, screwsize=undef, guides=true, orient=ORIENT_Y, align=V_CENTER)
|
||||
{
|
||||
difference() {
|
||||
union () {
|
||||
translate([0,-l/2,0])
|
||||
cube(size=[w, l, h], center=true);
|
||||
half_joiner_clear(h=h, w=w, a=a);
|
||||
dmnd_height = h*1.0;
|
||||
dmnd_width = dmnd_height*tan(a);
|
||||
guide_size = w/3;
|
||||
guide_width = 2*(dmnd_height/2-guide_size)*tan(a);
|
||||
|
||||
if ($children > 0) {
|
||||
difference() {
|
||||
children();
|
||||
half_joiner_clear(h=h, w=w, a=a, clearance=0.1, overlap=0.01, orient=orient, align=align);
|
||||
}
|
||||
}
|
||||
|
||||
// Subtract mated half_joiner.
|
||||
zrot(180) half_joiner(h=h+0.05, w=w+0.05, l=l+0.05, a=a, screwsize=undef, guides=guides, slop=0.0);
|
||||
render(convexity=12)
|
||||
orient_and_align([w, 2*l, h], orient, align, orig_orient=ORIENT_Y) {
|
||||
difference() {
|
||||
union () {
|
||||
fwd(l/2) cube(size=[w, l, h], center=true);
|
||||
cube([w, guide_width, h], center=true);
|
||||
}
|
||||
|
||||
// Make screwholes, if needed.
|
||||
if (screwsize != undef) {
|
||||
yrot(90) cylinder(r=screwsize*1.1/2, h=w+1, center=true, $fn=12);
|
||||
// Subtract mated half_joiner.
|
||||
zrot(180) half_joiner(h=h+0.01, w=w+0.01, l=guide_width+0.01, a=a, screwsize=undef, guides=guides, slop=0.0);
|
||||
|
||||
// Make screwholes, if needed.
|
||||
if (screwsize != undef) {
|
||||
xcyl(r=screwsize*1.1/2, l=w+1, $fn=12);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
//half_joiner2(screwsize=3);
|
||||
|
||||
|
||||
|
||||
module joiner(h=40, w=10, l=10, a=30, screwsize=undef, guides=true, slop=printer_slop)
|
||||
// Section: Full Joiners
|
||||
|
||||
|
||||
// Module: joiner_clear()
|
||||
// Description:
|
||||
// Creates a mask to clear an area so that a joiner can be placed there.
|
||||
// Usage:
|
||||
// joiner_clear(h, w, [a], [clearance], [overlap], [orient], [align])
|
||||
// Arguments:
|
||||
// h = Height of the joiner to clear space for.
|
||||
// w = Width of the joiner to clear space for.
|
||||
// a = Overhang angle of the joiner.
|
||||
// clearance = Extra width to clear.
|
||||
// overlap = Extra depth to clear.
|
||||
// orient = Orientation of the shape. Use the `ORIENT_` constants from `constants.scad`. Default: `ORIENT_Y`.
|
||||
// align = Alignment of the shape by the axis-negative (size1) end. Use the `V_` constants from `constants.scad`. Default: `V_CENTER`.
|
||||
// Example:
|
||||
// joiner_clear(orient=ORIENT_X);
|
||||
module joiner_clear(h=40, w=10, a=30, clearance=0, overlap=0.01, orient=ORIENT_Y, align=V_CENTER)
|
||||
{
|
||||
union() {
|
||||
translate([0,0,h/4])
|
||||
half_joiner(h=h/2, w=w, l=l, a=a, screwsize=screwsize, guides=guides, slop=slop);
|
||||
translate([0,0,-h/4])
|
||||
half_joiner2(h=h/2, w=w, l=l, a=a, screwsize=screwsize, guides=guides);
|
||||
dmnd_height = h*0.5;
|
||||
dmnd_width = dmnd_height*tan(a);
|
||||
guide_size = w/3;
|
||||
guide_width = 2*(dmnd_height/2-guide_size)*tan(a);
|
||||
|
||||
orient_and_align([w, guide_width, h], orient, align, orig_orient=ORIENT_Y) {
|
||||
up(h/4) half_joiner_clear(h=h/2.0-0.01, w=w, a=a, overlap=overlap, clearance=clearance);
|
||||
down(h/4) half_joiner_clear(h=h/2.0-0.01, w=w, a=a, overlap=overlap, clearance=-0.01);
|
||||
}
|
||||
}
|
||||
//joiner(screwsize=3);
|
||||
|
||||
|
||||
|
||||
module joiner_clear(h=40, w=10, a=30, clearance=0)
|
||||
// Module: joiner()
|
||||
// Usage:
|
||||
// joiner(h, w, l, [a], [screwsize], [guides], [slop], [orient], [align])
|
||||
// Description:
|
||||
// Creates a joiner object that can be attached to another joiner object.
|
||||
// Arguments:
|
||||
// h = Height of the joiner.
|
||||
// w = Width of the joiner.
|
||||
// l = Length of the backing to the joiner.
|
||||
// a = Overhang angle of the joiner.
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// slop = Printer specific slop value to make parts fit more closely.
|
||||
// orient = Orientation of the shape. Use the `ORIENT_` constants from `constants.scad`. Default: `ORIENT_Y`.
|
||||
// align = Alignment of the shape by the axis-negative (size1) end. Use the `V_` constants from `constants.scad`. Default: `V_CENTER`.
|
||||
// Examples:
|
||||
// joiner(screwsize=3, orient=ORIENT_X);
|
||||
// joiner(w=10, l=10, h=40, orient=ORIENT_X) cuboid([10, 10*2, 40], align=V_LEFT);
|
||||
module joiner(h=40, w=10, l=10, a=30, screwsize=undef, guides=true, slop=PRINTER_SLOP, orient=ORIENT_Y, align=V_CENTER)
|
||||
{
|
||||
up(h/4) half_joiner_clear(h=h/2.0-0.01, w=w, a=a, clearance=clearance);
|
||||
down(h/4) half_joiner_clear(h=h/2.0-0.01, w=w, a=a, clearance=-0.01);
|
||||
if ($children > 0) {
|
||||
difference() {
|
||||
children();
|
||||
joiner_clear(h=h, w=w, a=a, clearance=0.1, orient=orient, align=align);
|
||||
}
|
||||
}
|
||||
orient_and_align([w, 2*l, h], orient, align, orig_orient=ORIENT_Y) {
|
||||
up(h/4) half_joiner(h=h/2, w=w, l=l, a=a, screwsize=screwsize, guides=guides, slop=slop);
|
||||
down(h/4) half_joiner2(h=h/2, w=w, l=l, a=a, screwsize=screwsize, guides=guides);
|
||||
}
|
||||
}
|
||||
//joiner_clear();
|
||||
|
||||
|
||||
|
||||
module joiner_pair(spacing=100, h=40, w=10, l=10, a=30, screwsize=undef, guides=true, slop=printer_slop)
|
||||
// Section: Full Joiners Pairs/Sets
|
||||
|
||||
|
||||
// Module: joiner_pair_clear()
|
||||
// Description:
|
||||
// Creates a mask to clear an area so that a pair of joiners can be placed there.
|
||||
// Usage:
|
||||
// joiner_pair_clear(spacing, [n], [h], [w], [a], [clearance], [overlap], [orient], [align])
|
||||
// Arguments:
|
||||
// spacing = Spacing between joiner centers.
|
||||
// h = Height of the joiner to clear space for.
|
||||
// w = Width of the joiner to clear space for.
|
||||
// a = Overhang angle of the joiner.
|
||||
// n = Number of joiners (2 by default) to clear for.
|
||||
// clearance = Extra width to clear.
|
||||
// overlap = Extra depth to clear.
|
||||
// orient = Orientation of the shape. Use the `ORIENT_` constants from `constants.scad`. Default: `ORIENT_Y`.
|
||||
// align = Alignment of the shape by the axis-negative (size1) end. Use the `V_` constants from `constants.scad`. Default: `V_CENTER`.
|
||||
// Examples:
|
||||
// joiner_pair_clear(spacing=50, n=2);
|
||||
// joiner_pair_clear(spacing=50, n=3);
|
||||
module joiner_pair_clear(spacing=100, h=40, w=10, a=30, n=2, clearance=0, overlap=0.01, orient=ORIENT_Y, align=V_CENTER)
|
||||
{
|
||||
yrot_copies([0,180]) {
|
||||
translate([spacing/2, 0, 0]) {
|
||||
joiner(h=h, w=w, l=l, a=a, screwsize=screwsize, guides=guides, slop=slop);
|
||||
dmnd_height = h*0.5;
|
||||
dmnd_width = dmnd_height*tan(a);
|
||||
guide_size = w/3;
|
||||
guide_width = 2*(dmnd_height/2-guide_size)*tan(a);
|
||||
|
||||
orient_and_align([spacing+w, guide_width, h], orient, align, orig_orient=ORIENT_Y) {
|
||||
xspread(spacing, n=n) {
|
||||
joiner_clear(h=h, w=w, a=a, clearance=clearance, overlap=overlap);
|
||||
}
|
||||
}
|
||||
}
|
||||
//joiner_pair(spacing=100, h=40, w=10, l=10, a=30, screwsize=3, guides=true);
|
||||
|
||||
|
||||
|
||||
module joiner_pair_clear(spacing=100, h=40, w=10, a=30, clearance=0)
|
||||
// Module: joiner_pair()
|
||||
// Usage:
|
||||
// joiner_pair(h, w, l, [a], [screwsize], [guides], [slop], [orient], [align])
|
||||
// Description:
|
||||
// Creates a joiner_pair object that can be attached to other joiner_pairs .
|
||||
// Arguments:
|
||||
// spacing = Spacing between joiner centers.
|
||||
// h = Height of the joiners.
|
||||
// w = Width of the joiners.
|
||||
// l = Length of the backing to the joiners.
|
||||
// a = Overhang angle of the joiners.
|
||||
// n = Number of joiners in a row. Default: 2
|
||||
// alternate = If true (default), each joiner alternates it's orientation. If alternate is "alt", do opposite alternating orientations.
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// slop = Printer specific slop value to make parts fit more closely.
|
||||
// orient = Orientation of the shape. Use the `ORIENT_` constants from `constants.scad`. Default: `ORIENT_Y`.
|
||||
// align = Alignment of the shape by the axis-negative (size1) end. Use the `V_` constants from `constants.scad`. Default: `V_CENTER`.
|
||||
// Examples:
|
||||
// joiner_pair(spacing=50, l=10, orient=ORIENT_X) cuboid([10, 50+10-0.1, 40], align=V_LEFT);
|
||||
// joiner_pair(spacing=50, l=10, n=2, orient=ORIENT_X);
|
||||
// joiner_pair(spacing=50, l=10, n=3, alternate=false, orient=ORIENT_X);
|
||||
// joiner_pair(spacing=50, l=10, n=3, alternate=true, orient=ORIENT_X);
|
||||
// joiner_pair(spacing=50, l=10, n=3, alternate="alt", orient=ORIENT_X);
|
||||
module joiner_pair(spacing=100, h=40, w=10, l=10, a=30, n=2, alternate=true, screwsize=undef, guides=true, slop=PRINTER_SLOP, orient=ORIENT_Y, align=V_CENTER)
|
||||
{
|
||||
yrot_copies([0,180]) {
|
||||
translate([spacing/2, 0, 0]) {
|
||||
joiner_clear(h=h, w=w, a=a, clearance=clearance);
|
||||
if ($children > 0) {
|
||||
difference() {
|
||||
children();
|
||||
joiner_pair_clear(spacing=spacing, h=h, w=w, a=a, clearance=0.1, orient=orient, align=align);
|
||||
}
|
||||
}
|
||||
orient_and_align([spacing+w, 2*l, h], orient, align, orig_orient=ORIENT_Y) {
|
||||
left((n-1)*spacing/2) {
|
||||
for (i=[0:n-1]) {
|
||||
right(i*spacing) {
|
||||
yrot(180 + (alternate? (i*180+(alternate=="alt"?180:0))%360 : 0)) {
|
||||
joiner(h=h, w=w, l=l, a=a, screwsize=screwsize, guides=guides, slop=slop);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
//joiner_pair_clear(spacing=100, h=40, w=10, a=30);
|
||||
|
||||
|
||||
|
||||
module joiner_quad(xspacing=100, yspacing=50, h=40, w=10, l=10, a=30, screwsize=undef, guides=true, slop=printer_slop)
|
||||
// Section: Full Joiners Quads/Sets
|
||||
|
||||
|
||||
// Module: joiner_quad_clear()
|
||||
// Description:
|
||||
// Creates a mask to clear an area so that a pair of joiners can be placed there.
|
||||
// Usage:
|
||||
// joiner_quad_clear(spacing, [n], [h], [w], [a], [clearance], [overlap], [orient], [align])
|
||||
// Arguments:
|
||||
// spacing1 = Spacing between joiner centers.
|
||||
// spacing2 = Spacing between back-to-back pairs/sets of joiners.
|
||||
// h = Height of the joiner to clear space for.
|
||||
// w = Width of the joiner to clear space for.
|
||||
// a = Overhang angle of the joiner.
|
||||
// n = Number of joiners in a row. Default: 2
|
||||
// clearance = Extra width to clear.
|
||||
// overlap = Extra depth to clear.
|
||||
// orient = Orientation of the shape. Use the `ORIENT_` constants from `constants.scad`. Default: `ORIENT_Y`.
|
||||
// align = Alignment of the shape by the axis-negative (size1) end. Use the `V_` constants from `constants.scad`. Default: `V_CENTER`.
|
||||
// Examples:
|
||||
// joiner_quad_clear(spacing1=50, spacing2=50, n=2);
|
||||
// joiner_quad_clear(spacing1=50, spacing2=50, n=3);
|
||||
module joiner_quad_clear(xspacing=undef, yspacing=undef, spacing1=undef, spacing2=undef, n=2, h=40, w=10, a=30, clearance=0, overlap=0.01, orient=ORIENT_Y, align=V_CENTER)
|
||||
{
|
||||
zrot_copies([0,180]) {
|
||||
translate([0, yspacing/2, 0]) {
|
||||
joiner_pair(spacing=xspacing, h=h, w=w, l=l, a=a, screwsize=screwsize, guides=guides, slop=slop);
|
||||
spacing1 = first_defined([spacing1, xspacing, 100]);
|
||||
spacing2 = first_defined([spacing2, yspacing, 50]);
|
||||
orient_and_align([w+spacing1, spacing2, h], orient, align, orig_orient=ORIENT_Y) {
|
||||
zrot_copies(n=2) {
|
||||
back(spacing2/2) {
|
||||
joiner_pair_clear(spacing=spacing1, n=n, h=h, w=w, a=a, clearance=clearance, overlap=overlap);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
//joiner_quad(xspacing=100, yspacing=50, h=40, w=10, l=10, a=30, screwsize=3, guides=true);
|
||||
|
||||
|
||||
|
||||
module joiner_quad_clear(xspacing=100, yspacing=50, h=40, w=10, a=30, clearance=0)
|
||||
// Module: joiner_quad()
|
||||
// Usage:
|
||||
// joiner_quad(h, w, l, [a], [screwsize], [guides], [slop], [orient], [align])
|
||||
// Description:
|
||||
// Creates a joiner_quad object that can be attached to other joiner_pairs .
|
||||
// Arguments:
|
||||
// spacing = Spacing between joiner centers.
|
||||
// h = Height of the joiners.
|
||||
// w = Width of the joiners.
|
||||
// l = Length of the backing to the joiners.
|
||||
// a = Overhang angle of the joiners.
|
||||
// n = Number of joiners in a row. Default: 2
|
||||
// alternate = If true (default), each joiner alternates it's orientation. If alternate is "alt", do opposite alternating orientations.
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// slop = Printer specific slop value to make parts fit more closely.
|
||||
// orient = Orientation of the shape. Use the `ORIENT_` constants from `constants.scad`. Default: `ORIENT_Y`.
|
||||
// align = Alignment of the shape by the axis-negative (size1) end. Use the `V_` constants from `constants.scad`. Default: `V_CENTER`.
|
||||
// Examples:
|
||||
// joiner_quad(spacing1=50, spacing2=50, l=10, orient=ORIENT_X) cuboid([50, 50+10-0.1, 40]);
|
||||
// joiner_quad(spacing1=50, spacing2=50, l=10, n=2, orient=ORIENT_X);
|
||||
// joiner_quad(spacing1=50, spacing2=50, l=10, n=3, alternate=false, orient=ORIENT_X);
|
||||
// joiner_quad(spacing1=50, spacing2=50, l=10, n=3, alternate=true, orient=ORIENT_X);
|
||||
// joiner_quad(spacing1=50, spacing2=50, l=10, n=3, alternate="alt", orient=ORIENT_X);
|
||||
module joiner_quad(spacing1=undef, spacing2=undef, xspacing=undef, yspacing=undef, h=40, w=10, l=10, a=30, n=2, alternate=true, screwsize=undef, guides=true, slop=PRINTER_SLOP, orient=ORIENT_Y, align=V_CENTER)
|
||||
{
|
||||
zrot_copies([0,180]) {
|
||||
translate([0, yspacing/2, 0]) {
|
||||
joiner_pair_clear(spacing=xspacing, h=h, w=w, a=a, clearance=clearance);
|
||||
spacing1 = first_defined([spacing1, xspacing, 100]);
|
||||
spacing2 = first_defined([spacing2, yspacing, 50]);
|
||||
if ($children > 0) {
|
||||
difference() {
|
||||
children();
|
||||
joiner_quad_clear(spacing1=spacing1, spacing2=spacing2, h=h, w=w, a=a, clearance=0.1, orient=orient, align=align);
|
||||
}
|
||||
}
|
||||
orient_and_align([w+spacing1, spacing2, h], orient, align, orig_orient=ORIENT_Y) {
|
||||
zrot_copies(n=2) {
|
||||
back(spacing2/2) {
|
||||
joiner_pair(spacing=spacing1, n=n, h=h, w=w, l=l, a=a, screwsize=screwsize, guides=guides, slop=slop);
|
||||
}
|
||||
}
|
||||
}
|
||||
}
|
||||
//joiner_quad_clear(xspacing=100, yspacing=50, h=40, w=10, a=30);
|
||||
|
||||
|
||||
|
||||
// vim: noexpandtab tabstop=4 shiftwidth=4 softtabstop=4 nowrap
|
||||
|
||||
|
||||
Reference in New Issue
Block a user