mirror of
https://github.com/revarbat/BOSL2.git
synced 2025-08-29 05:40:23 +02:00
Fixed docs links.
This commit is contained in:
Revar Desmera
54
joiners.scad
54
joiners.scad
@@ -23,9 +23,9 @@
|
||||
// a = Overhang angle of the joiner.
|
||||
// clearance = Extra width to clear.
|
||||
// overlap = Extra depth to clear.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Example:
|
||||
// half_joiner_clear(spin=-90);
|
||||
module half_joiner_clear(h=20, w=10, a=30, clearance=0, overlap=0.01, anchor=CENTER, spin=0, orient=UP)
|
||||
@@ -69,9 +69,9 @@ module half_joiner_clear(h=20, w=10, a=30, clearance=0, overlap=0.01, anchor=CEN
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// slop = Printer specific slop value to make parts fit more closely.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Example:
|
||||
// half_joiner(screwsize=3, spin=-90);
|
||||
module half_joiner(h=20, w=10, l=10, a=30, screwsize=undef, guides=true, slop=PRINTER_SLOP, anchor=CENTER, spin=0, orient=UP)
|
||||
@@ -152,9 +152,9 @@ module half_joiner(h=20, w=10, l=10, a=30, screwsize=undef, guides=true, slop=PR
|
||||
// a = Overhang angle of the half_joiner.
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Example:
|
||||
// half_joiner2(screwsize=3, spin=-90);
|
||||
module half_joiner2(h=20, w=10, l=10, a=30, screwsize=undef, guides=true, anchor=CENTER, spin=0, orient=UP)
|
||||
@@ -206,9 +206,9 @@ module half_joiner2(h=20, w=10, l=10, a=30, screwsize=undef, guides=true, anchor
|
||||
// a = Overhang angle of the joiner.
|
||||
// clearance = Extra width to clear.
|
||||
// overlap = Extra depth to clear.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Example:
|
||||
// joiner_clear(spin=-90);
|
||||
module joiner_clear(h=40, w=10, a=30, clearance=0, overlap=0.01, anchor=CENTER, spin=0, orient=UP)
|
||||
@@ -241,9 +241,9 @@ module joiner_clear(h=40, w=10, a=30, clearance=0, overlap=0.01, anchor=CENTER,
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// slop = Printer specific slop value to make parts fit more closely.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Examples:
|
||||
// joiner(screwsize=3, spin=-90);
|
||||
// joiner(w=10, l=10, h=40, spin=-90) cuboid([10, 10*2, 40], anchor=RIGHT);
|
||||
@@ -281,9 +281,9 @@ module joiner(h=40, w=10, l=10, a=30, screwsize=undef, guides=true, slop=PRINTER
|
||||
// n = Number of joiners (2 by default) to clear for.
|
||||
// clearance = Extra width to clear.
|
||||
// overlap = Extra depth to clear.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Examples:
|
||||
// joiner_pair_clear(spacing=50, n=2);
|
||||
// joiner_pair_clear(spacing=50, n=3);
|
||||
@@ -319,9 +319,9 @@ module joiner_pair_clear(spacing=100, h=40, w=10, a=30, n=2, clearance=0, overla
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// slop = Printer specific slop value to make parts fit more closely.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Examples:
|
||||
// joiner_pair(spacing=50, l=10, spin=-90) cuboid([10, 50+10-0.1, 40], anchor=RIGHT);
|
||||
// joiner_pair(spacing=50, l=10, n=2, spin=-90);
|
||||
@@ -368,9 +368,9 @@ module joiner_pair(spacing=100, h=40, w=10, l=10, a=30, n=2, alternate=true, scr
|
||||
// n = Number of joiners in a row. Default: 2
|
||||
// clearance = Extra width to clear.
|
||||
// overlap = Extra depth to clear.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Examples:
|
||||
// joiner_quad_clear(spacing1=50, spacing2=50, n=2);
|
||||
// joiner_quad_clear(spacing1=50, spacing2=50, n=3);
|
||||
@@ -405,9 +405,9 @@ module joiner_quad_clear(xspacing=undef, yspacing=undef, spacing1=undef, spacing
|
||||
// screwsize = Diameter of screwhole.
|
||||
// guides = If true, create sliding alignment guides.
|
||||
// slop = Printer specific slop value to make parts fit more closely.
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Examples:
|
||||
// joiner_quad(spacing1=50, spacing2=50, l=10, spin=-90) cuboid([50, 50+10-0.1, 40]);
|
||||
// joiner_quad(spacing1=50, spacing2=50, l=10, n=2, spin=-90);
|
||||
|
||||
Reference in New Issue
Block a user