mirror of
https://github.com/revarbat/BOSL2.git
synced 2025-09-02 08:12:37 +02:00
Fixed docs links.
This commit is contained in:
Revar Desmera
@@ -99,9 +99,9 @@ function nema_motor_screw_depth(size) = lookup(size, [
|
||||
// h = Length of motor body. Default: 24mm
|
||||
// shaft = Shaft diameter. Default: 5mm
|
||||
// shaft_len = Length of shaft protruding out the top of the stepper motor. Default: 20mm
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "shaft-top" = The top of the shaft.
|
||||
// "shaft-middle" = The middle of the shaft.
|
||||
@@ -164,9 +164,9 @@ module nema11_stepper(h=24, shaft=5, shaft_len=20, anchor=TOP, spin=0, orient=UP
|
||||
// h = Length of motor body. Default: 24mm
|
||||
// shaft = Shaft diameter. Default: 5mm
|
||||
// shaft_len = Length of shaft protruding out the top of the stepper motor. Default: 24mm
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "shaft-top" = The top of the shaft.
|
||||
// "shaft-middle" = The middle of the shaft.
|
||||
@@ -229,9 +229,9 @@ module nema14_stepper(h=24, shaft=5, shaft_len=24, anchor=TOP, spin=0, orient=UP
|
||||
// h = Length of motor body. Default: 34mm
|
||||
// shaft = Shaft diameter. Default: 5mm
|
||||
// shaft_len = Length of shaft protruding out the top of the stepper motor. Default: 20mm
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "shaft-top" = The top of the shaft.
|
||||
// "shaft-middle" = The middle of the shaft.
|
||||
@@ -313,9 +313,9 @@ module nema17_stepper(h=34, shaft=5, shaft_len=20, anchor=TOP, spin=0, orient=UP
|
||||
// h = Length of motor body. Default: 50mm
|
||||
// shaft = Shaft diameter. Default: 6.35mm
|
||||
// shaft_len = Length of shaft protruding out the top of the stepper motor. Default: 25mm
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "shaft-top" = The top of the shaft.
|
||||
// "shaft-middle" = The middle of the shaft.
|
||||
@@ -380,9 +380,9 @@ module nema23_stepper(h=50, shaft=6.35, shaft_len=25, anchor=TOP, spin=0, orient
|
||||
// h = Length of motor body. Default: 75mm
|
||||
// shaft = Shaft diameter. Default: 12.7mm
|
||||
// shaft_len = Length of shaft protruding out the top of the stepper motor. Default: 32mm
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "shaft-top" = The top of the shaft.
|
||||
// "shaft-middle" = The middle of the shaft.
|
||||
@@ -452,9 +452,9 @@ module nema34_stepper(h=75, shaft=12.7, shaft_len=32, anchor=TOP, spin=0, orient
|
||||
// depth = The thickness of the mounting hole mask. Default: 5
|
||||
// l = The length of the slots, for making an adjustable motor mount. Default: 5
|
||||
// slop = The printer-specific slop value to make parts fit just right. Default: `PRINTER_SLOP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "screw1" = The center top of the screw hole/slot in the X+Y+ quadrant.
|
||||
// "screw2" = The center top of the screw hole/slot in the X-Y+ quadrant.
|
||||
@@ -516,9 +516,9 @@ module nema_mount_holes(size=17, depth=5, l=5, slop=PRINTER_SLOP, anchor=CENTER,
|
||||
// depth = The thickness of the mounting hole mask. Default: 5
|
||||
// l = The length of the slots, for making an adjustable motor mount. Default: 5
|
||||
// slop = The printer-specific slop value to make parts fit just right. Default: `PRINTER_SLOP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "screw1" = The center top of the screw hole/slot in the X+Y+ quadrant.
|
||||
// "screw2" = The center top of the screw hole/slot in the X-Y+ quadrant.
|
||||
@@ -541,9 +541,9 @@ module nema11_mount_holes(depth=5, l=5, slop=PRINTER_SLOP, anchor=CENTER, spin=0
|
||||
// depth = The thickness of the mounting hole mask. Default: 5
|
||||
// l = The length of the slots, for making an adjustable motor mount. Default: 5
|
||||
// slop = The printer-specific slop value to make parts fit just right. Default: `PRINTER_SLOP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "screw1" = The center top of the screw hole/slot in the X+Y+ quadrant.
|
||||
// "screw2" = The center top of the screw hole/slot in the X-Y+ quadrant.
|
||||
@@ -566,9 +566,9 @@ module nema14_mount_holes(depth=5, l=5, slop=PRINTER_SLOP, anchor=CENTER, spin=0
|
||||
// depth = The thickness of the mounting hole mask. Default: 5
|
||||
// l = The length of the slots, for making an adjustable motor mount. Default: 5
|
||||
// slop = The printer-specific slop value to make parts fit just right. Default: `PRINTER_SLOP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "screw1" = The center top of the screw hole/slot in the X+Y+ quadrant.
|
||||
// "screw2" = The center top of the screw hole/slot in the X-Y+ quadrant.
|
||||
@@ -591,9 +591,9 @@ module nema17_mount_holes(depth=5, l=5, slop=PRINTER_SLOP, anchor=CENTER, spin=0
|
||||
// depth = The thickness of the mounting hole mask. Default: 5
|
||||
// l = The length of the slots, for making an adjustable motor mount. Default: 5
|
||||
// slop = The printer-specific slop value to make parts fit just right. Default: `PRINTER_SLOP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "screw1" = The center top of the screw hole/slot in the X+Y+ quadrant.
|
||||
// "screw2" = The center top of the screw hole/slot in the X-Y+ quadrant.
|
||||
@@ -616,9 +616,9 @@ module nema23_mount_holes(depth=5, l=5, slop=PRINTER_SLOP, anchor=CENTER, spin=0
|
||||
// depth = The thickness of the mounting hole mask. Default: 5
|
||||
// l = The length of the slots, for making an adjustable motor mount. Default: 5
|
||||
// slop = The printer-specific slop value to make parts fit just right. Default: `PRINTER_SLOP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments#orient). Default: `UP`
|
||||
// anchor = Translate so anchor point is at origin (0,0,0). See [anchor](attachments.scad#anchor). Default: `CENTER`
|
||||
// spin = Rotate this many degrees around the Z axis after anchor. See [spin](attachments.scad#spin). Default: `0`
|
||||
// orient = Vector to rotate top towards, after spin. See [orient](attachments.scad#orient). Default: `UP`
|
||||
// Extra Anchors:
|
||||
// "screw1" = The center top of the screw hole/slot in the X+Y+ quadrant.
|
||||
// "screw2" = The center top of the screw hole/slot in the X-Y+ quadrant.
|
||||
|
||||
Reference in New Issue
Block a user