openscad/Mendel90
1
0
Fork 0
mirror of https://github.com/nophead/Mendel90.git synced 2025-01-17 21:08:16 +01:00
Code Issues Releases Wiki Activity
Mendel90/sturdy/bom/bom.txt

171 lines
12 KiB
Plaintext
Raw Normal View History

Added Sturdy sized variant files
2012-03-12 02:54:18 +00:00
Vitamins:
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
S
D E M p
l a o X Y
c e i o
o c n l c c
n B t M s a X X a Y Y Z
n e r a h X r Y r Z
e d o F c i o W r i m r i m m
c n r h n l a a i d o a i d o a o
t B f i a i l d d x a l t x a l t x t
o e a c m n e e e i g e o i g e o i o
r d n s e e t r s s e r r s e r r s r
| | | | | | | | | | | | | | 5| | | | | 5 Aluminium foil tape 50mm x 227mm x 0.05mm
| | | | | | | 4| 3| | | | | | | | | | | 7 Ball bearing 608 8mm x 22mm x 7mm
| | | | | | | | | | | 2| | | | 2| | | | 4 Ball bearing 624 4mm x 13mm x 5mm
| 4| | | | | | | | | | | | | | | | | | 4 19mm bulldog clip
| 1| | | | | | | | | | | | | | | | | | 1 PCB bed 214mm x 214mm
| | | | | | | | | | | | | 1| | | | | | 1 Belt T5 x 6mm x 691mm (PU & Kevlar)
| | | | | | | | | 1| | | | | | | | | | 1 Belt T5 x 6mm x 908mm (PU & Kevlar)
| | | | | | | | | | | | | | 1| | | | | 1 Corrugated cardboard 193mm x 217mm x 6mm
| 4| | | | | | | | | 1| | | | | | | | | 5 M3 cap screw x 10mm
2| | | 8| | | | | | | | | 2| | 8| | | | | 20 M3 cap screw x 16mm
2| | | | | | | | | | 1| | | | | | | | 8| 11 M3 cap screw x 20mm
| | | | | | | | | | 2| | | | | | | | | 2 M3 cap screw x 25mm
2| | | | | | | | | | | | | | | | | | | 2 M3 cap screw x 45mm
| | | | | | | | | | | | | | 6| | | | | 6 M4 cap screw x 16mm
| | | | | | | | | | | | | 4| 2| | | 2| 2| 10 M4 cap screw x 20mm
| | 4| | | | | | | | | | | | | | | | | 4 M4 cap screw x 25mm
| | | | | | | | | | | | | | | 1| | | | 1 M4 cap screw x 30mm
| | | | | | | | | | | 1| | | | | | | | 1 M4 cap screw x 45mm
| | | | | | | 4| | | | | | | | | | | | 4 M8 cap screw x 30mm
| | | | | | | | | | | | | | 1| | | | | 1 Dibond sheet 217mm x 217mm x 3mm
1| | | | | | | | | | | | | | | | | | | 1 15 way D PCB mount plug
1| | | | | | | | | | | | | | | | | | | 1 15 way D IDC socket
| | | | | | | | | | 1| | | | | | | | | 1 Fan 30mm x 10mm
| | | | | | | | 1| | | | 1| | | | 1| | | 3 M3 grub screw x 6mm
| 1| | | | | | | | | | | | | | | | | | 1 Glass sheet 214mm x 202mm x 2mm
| | | | | | | | 1| | | | | | | | | | | 1 JHead MK4 hot end
| 4| | | | | | | | | | | | | | | | | | 4 Hex male / female pillar M3 x 20mm
| | | | | | | | 3| | | | | | | | | | | 3 M3 hex screw x 10mm
| | | | | | | | | | | | 2| | | | | | | 2 M3 hex screw x 16mm
| | | | | | | | | | | 2| 2| | | | | | | 4 M4 hex screw x 16mm
| | | | | | | | 2| | | | | | | | | | | 2 M4 hex screw x 20mm
| | | | | | | | 2| | | | | | | | | | | 2 M4 hex screw x 50mm
| | | | | | | | 1| | | | | | | | | | | 1 M8 hex screw x 60mm
| | | 1| | | | | | | | | | | | | | | | 1 PSU e.g. KY240W12L
| | | | | | | | | | 3| 2| 2| | 3| | | | | 10 LM10UU linear bearing
| | | | 2| | | | | | | | | | | | | | | 2 MDF sheet 162mm x 385mm x 12mm
| | | | 1| | | | | | | | | | | | | | | 1 MDF sheet 489mm x 385mm x 12mm
| | | | 1| | | | | | | | | | | | | | | 1 MDF sheet 489mm x 436mm x 12mm
| | | | | | | | 1| | | | 1| | | | 1| | 2| 5 NEMA17 x 47.5mm stepper motor
| | | | | | | | | | | 1| 1| | | | | | | 2 Brass nut M8
2| | | | | | | | 1| | 1| | 1| | | | 1| | | 6 Nut M3
| | | | | | | | 2| | | | | | | | | | | 2 Nut M4
| | | | | | | | 2| | | | | | | | | | | 2 Nut M8
2| | | | | | | | | | 3| | 4| | 8| | | | 8| 25 Nyloc nut M3
| | 4| | | | | | | | | 3| 2| 4| 8| 1| | 2| 2| 26 Nyloc nut M4
| | | | | | | 4| | | | | | | | | | | | 4 Nyloc nut M8
2| | | | | | | | | | | | | | | | | | | 2 Nitrile O-ring 2.5mm x 1.6mm
1| | | | | | | | | | | | | | | | | | | 1 Extruder connection PCB
| | | | | | | | | 1| | | | | | | | | | 1 Polypropylene strip 417mm x 18mm x 0.5mm
| | | | 1| | | | | | | | | | | | | | | 1 Polypropylene strip 401mm x 25mm x 0.5mm
| | | | 1| | | | | | | | | | | | | | | 1 Polypropylene strip 277mm x 33mm x 0.5mm
| | | | | | | | | | | | 3| | | | 4| | 8| 15 M3 pan screw x 8mm
4| | | | | | | | | | | | 2| 2| | | | 2| | 10 No2 pan wood screw x 13mm
| | | | | | | | | | 4| | | | | | | | | 4 No4 pan wood screw x 16mm
| | | |39| | 3| 2| | | | | | 8| | 1| 4| 4| 4| 65 No6 pan wood screw x 16mm
| | | | | | | | | | | | | 1| | | | | | 1 Smooth rod 10mm x 290mm
| | | | | | | | | | | | | | | | | 2| | 2 Smooth rod 10mm x 336mm
| | | | | | | | | 2| | | | | | | | | | 2 Smooth rod 10mm x 403mm
| | | | | | | | | | | | | 1| | | | | | 1 Smooth rod 10mm x 432mm
| | | | | | | | 1| | | | | | | | | | | 1 Smooth rod 8mm x 22mm
| 1| | | | | | | | | | | | | | | | | | 1 Epcos B57560G104F 100K 1% thermistor
| | | 1| | | | | | | | | | | | | | | | 1 Electronics e.g. Sanguinolou
| | | | | | | | | | | | 1| 1| | | | 1| | 3 Microswitch
| | | | | | | | 2| | | | | | | | | | | 2 Spring 7mm OD, 1mm gauge x 10mm long
| | | | | | | | | | | | | | | | | 2| | 2 Threaded rod M8 x 273mm
| 2| | | | | | | 2| | | | | | | | | | | 4 PTFE sleeving OD 1.2mm ID 0.71mm x 57mm
| | | | | | | | 2| | | | | | | | | | | 2 PTFE sleeving OD 2.6mm ID 2mm x 45mm
| | | | | | | 1| | | | | | | | | | | | 1 PTFE tubing OD 4.6mm ID 3.84mm x 750mm
| | | | | | | | | | | | | | | | | | 2| 2 PVC aquarium tubing OD 6mm ID 4mm x 16mm
4| | | | | | | | | | | | | | | | | | | 4 3 way terminal block
4| | | | | | | | | | | | 2| 2| | | | 2| | 10 Washer M2.5 x 5.9mm x 0.5mm
6| 4| | 8| | | | | 3| | 3| | 7| | 8| | 4| |16| 59 Washer M3 x 7mm x 0.5mm
| | 4| |39| | 3| 2| | | | 4| 2|12|14| 5| 4| 6| 6|101 Washer M4 x 9mm x 0.8mm
| | | | | | | | | | | 2| | | | 2| | | | 4 Washer M5 x 20mm x 1.4mm
| | | | | | | 8| 1| | | | | | | | | | | 9 Washer M8 x 17mm x 1.6mm
| | | | | | | 4| | | | | | | | | | | | 4 Washer M8 x 30mm x 1.5mm
| | | | | | | | | | 2| | | | | | | | | 2 Wingnut M4
| | | 8| | | | | 3| | | | 3| | | | 4| | 8| 26 Star washer M3 x 0.5mm
| | | |39| | 3| 2| | | | | | 8| | 1| 4| 4| 4| 65 Star washer M4 x 0.8mm
| | | | | | | | 1| | | | | | | | | | | 1 Star washer M8 x 1.6mm
| | | | | | | | 1| | | | | | | | | | | 1 Ziptie 100mm min length
| | | | | | | | | | 3| | | | 3| | | | | 6 Ziptie 105mm min length
Added Sturdy sized variant files
2012-03-12 02:54:18 +00:00
Printed:
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
| | | | 2| | | | | | | | | | | | | | | 2 cable_clip_AB.stl
| | | | 2| | | | | | | | | | | | | | | 2 cable_clip_AD.stl
| | | | 1| | | | | | | | | | | | | | | 1 cable_clip_CA.stl
1| | | | | | | | | | | | | | | | | | | 1 d_motor_bracket.stl
1| | | | | | | | | | | | | | | | | | | 1 d_motor_bracket_lid.stl
1| | | | | | | | | | | | | | | | | | | 1 d_shell.stl
1| | | | | | | | | | | | | | | | | | | 1 d_shell_lid.stl
| | | | | | | 1| | | | | | | | | | | | 1 dust_filter.stl
| | 1| | | | | | | | | | | | | | | | | 1 fan_guard.stl
| | | | | | | | 1| | | | | | | | | | | 1 feed_tube_connector.stl
| | | |10| | | | | | | | | | | | | | | 10 fixing_block.stl
| | | | | | 1| | | | | | | | | | | | | 1 mains_inlet.stl
| | | 4| | | | | | | | | | | | | | | | 4 pcb_spacer.stl
| | | | | | | | | | | | 1| | | | 1| | | 2 pulley.stl
| | | | | | | | | | | | 1| | | | | | | 1 ribbon_clamp_14_33.stl
1| | | | | | | | | | | | | | | | | | | 1 ribbon_clamp_14_33NB.stl
| | | | | | | | | | | | 1| | | | | | | 1 ribbon_clamp_20_33.stl
| | | | 1| | | | | | | | | | | | | | | 1 ribbon_clamp_20_40.stl
| | | | 1| | | | | | | | | | | | | | | 1 ribbon_clamp_26_40.stl
| | | | | | | | | | | | | | 1| | | | | 1 ribbon_clamp_26_44.stl
| | | | | | | | | | | | | | 1| | | | | 1 ribbon_clamp_26_44N.stl
| | | | | | | 2| | | | | | | | | | | | 2 spool_bracket_female.stl
| | | | | | | 2| | | | | | | | | | | | 2 spool_bracket_male.stl
| | | | | | | 2| | | | | | | | | | | | 2 spool_holder_p_clip.stl
| | | | | | | | 1| | | | | | | | | | | 1 wades_big_gear.stl
| | | | | | | | 1| | | | | | | | | | | 1 wades_block.stl
| | | | | | | | 1| | | | | | | | | | | 1 wades_gear_spacer.stl
| | | | | | | | 1| | | | | | | | | | | 1 wades_idler_block.stl
| | | | | | | | 1| | | | | | | | | | | 1 wades_small_gear.stl
| | | | | | | | | | 1| | | | | | | | | 1 x_belt_clamp.stl
| | | | | | | | | | 1| | | | | | | | | 1 x_belt_grip.stl
| | | | | | | | | | 1| | | | | | | | | 1 x_belt_tensioner.stl
| | | | | | | | | | 1| | | | | | | | | 1 x_carriage.stl
| | | | | | | | | | 1| | | | | | | | | 1 x_carriage_fan_duct.stl
| | | | | | | | | | | 1| | | | | | | | 1 x_idler_bracket.stl
| | | | | | | | | | | | 1| | | | | | | 1 x_motor_bracket.stl
| | | | | | | | | | | | | 3| | | | | | 3 y_bar_clamp.stl
| | | | | | | | | | | | | 1| | | | | | 1 y_bar_clamp_switch.stl
| | | | | | | | | | | | | | 2| | | | | 2 y_bearing_mount.stl
| | | | | | | | | | | | | | 1| | | | | 1 y_bearing_mount_switch.stl
| | | | | | | | | | | | | | 1| | | | | 1 y_belt_anchor.stl
| | | | | | | | | | | | | | 1| | | | | 1 y_belt_anchor_toothed.stl
| | | | | | | | | | | | | | 1| | | | | 1 y_belt_clip.stl
| | | | | | | | | | | | | | 1| | | | | 1 y_belt_clip_toothed.stl
| | | | | | | | | | | | | | | 1| | | | 1 y_idler_bracket.stl
| | | | | | | | | | | | | | | | 1| | | 1 y_motor_bracket.stl
| | | | | | | | | | | | | | | | | 1| | 1 z_bar_clamp.stl
| | | | | | | | | | | | | | | | | 1| | 1 z_bar_clamp_switch.stl
| | | | | | | | | | | | | | | | | | 4| 4 z_coupling.stl
| | | | | | | | | | | | | | | | | | 1| 1 z_motor_bracket_lhs.stl
| | | | | | | | | | | | | | | | | | 1| 1 z_motor_bracket_rhs.stl
| | | | | | | | | | | | | | | | | 2| | 2 z_screw_pointer.stl
Added Sturdy sized variant files
2012-03-12 02:54:18 +00:00
Sub-assemblies:
1 D_connector_assembly
1 bed_assembly
1 bed_fan_assembly
1 electronics_assembly
1 frame_assembly
1 machine_assembly
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
1 mains_inlet_assembly
1 spool_holder_assembly
Added Sturdy sized variant files
2012-03-12 02:54:18 +00:00
1 wades_assembly
1 x_axis_assembly
1 x_carriage_assembly
1 x_idler_assembly
1 x_motor_assembly
1 y_axis_assembly
1 y_carriage_assembly
1 y_idler_assembly
1 y_motor_assembly
1 z_axis_assembly
2 z_motor_assemblies
Reference in New Issue Copy Permalink