1
0
mirror of https://github.com/nophead/Mendel90.git synced 2025-01-17 12:58:16 +01:00
Mendel90/sturdy/stls/y_bearing_mount_switch.stl

10363 lines
240 KiB
Plaintext
Raw Normal View History

2012-03-12 02:54:18 +00:00
solid OpenSCAD_Model
facet normal -0.999006 -0.0445804 0
outer loop
vertex -24.99 12 0
vertex -24.968 11.507 0
vertex -24.99 12 4
endloop
endfacet
facet normal -0.999006 -0.0445804 0
outer loop
vertex -24.99 12 4
vertex -24.968 11.507 0
vertex -24.968 11.507 4
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.99 12 0
vertex -24.968 12.493 0
vertex -24.968 11.507 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.968 12.493 0
vertex -24.902 12.982 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.902 12.982 0
vertex -24.792 13.463 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.792 13.463 0
vertex -24.639 13.933 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.639 13.933 0
vertex -24.445 14.386 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.445 14.386 0
vertex -24.211 14.821 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.211 14.821 0
vertex -23.94 15.233 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -23.94 15.233 0
vertex -23.632 15.619 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -23.632 15.619 0
vertex -23.291 15.975 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -23.291 15.975 0
vertex -22.919 16.3 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -22.919 16.3 0
vertex -22.52 16.59 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -22.52 16.59 0
vertex -22.096 16.843 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -22.096 16.843 0
vertex -21.652 17.057 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.652 17.057 0
vertex -21.19 17.231 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.19 17.231 0
vertex -20.714 17.362 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -20.714 17.362 0
vertex -20.228 17.45 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -20.228 17.45 0
vertex -19.737 17.494 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -19.737 17.494 0
vertex -19.49 17.494 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -19.49 17.494 0
vertex -19.49 17.5 0
vertex -11.99 17.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -21.21 13.372 0
vertex -24.968 11.507 0
vertex -20.862 13.72 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -15.508 11.045 0
vertex -11.99 17.5 0
vertex -11.99 6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -19.49 6.506 0
vertex -11.99 6.5 0
vertex -19.49 6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -11.99 6.5 0
vertex -19.49 6.506 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -19.49 9.8 0
vertex -11.99 6.5 0
vertex -19.98 9.855 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -19.737 6.506 0
vertex -20.228 6.55 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -20.228 6.55 0
vertex -20.714 6.638 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -20.714 6.638 0
vertex -21.19 6.769 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.19 6.769 0
vertex -21.652 6.943 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.652 6.943 0
vertex -22.096 7.157 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -22.096 7.157 0
vertex -22.52 7.41 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -22.52 7.41 0
vertex -22.919 7.7 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -22.919 7.7 0
vertex -23.291 8.025 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -23.291 8.025 0
vertex -23.632 8.381 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -23.632 8.381 0
vertex -23.94 8.767 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -23.94 8.767 0
vertex -24.211 9.179 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.211 9.179 0
vertex -24.445 9.614 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.445 9.614 0
vertex -24.639 10.067 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.639 10.067 0
vertex -24.792 10.537 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -24.792 10.537 0
vertex -24.902 11.018 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.69 12 0
vertex -21.635 11.51 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.635 11.51 0
vertex -21.472 11.045 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.472 11.045 0
vertex -21.21 10.628 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.21 10.628 0
vertex -20.862 10.28 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -20.862 10.28 0
vertex -20.445 10.018 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -20.445 10.018 0
vertex -11.99 6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -20.445 10.018 0
vertex -19.98 9.855 0
vertex -11.99 6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -17.49 9.8 0
vertex -11.99 6.5 0
vertex -19.49 9.8 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -19.49 14.2 0
vertex -11.99 17.5 0
vertex -17.49 14.2 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -15.345 11.51 0
vertex -11.99 17.5 0
vertex -15.508 11.045 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -15.508 12.955 0
vertex -11.99 17.5 0
vertex -15.345 12.49 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -17.49 9.8 0
vertex -17 9.855 0
vertex -11.99 6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -17 9.855 0
vertex -16.535 10.018 0
vertex -11.99 6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -15.345 12.49 0
vertex -11.99 17.5 0
vertex -15.29 12 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -16.535 10.018 0
vertex -16.118 10.28 0
vertex -11.99 6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -15.29 12 0
vertex -11.99 17.5 0
vertex -15.345 11.51 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -16.118 10.28 0
vertex -15.77 10.628 0
vertex -11.99 6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -15.77 10.628 0
vertex -15.508 11.045 0
vertex -11.99 6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -15.77 13.372 0
vertex -11.99 17.5 0
vertex -15.508 12.955 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -16.118 13.72 0
vertex -11.99 17.5 0
vertex -15.77 13.372 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -16.535 13.982 0
vertex -11.99 17.5 0
vertex -16.118 13.72 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -17 14.145 0
vertex -11.99 17.5 0
vertex -16.535 13.982 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -17.49 14.2 0
vertex -11.99 17.5 0
vertex -17 14.145 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -19.49 17.494 0
vertex -11.99 17.5 0
vertex -19.49 14.2 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -19.49 17.494 0
vertex -19.49 14.2 0
vertex -19.98 14.145 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -19.49 17.494 0
vertex -19.98 14.145 0
vertex -20.445 13.982 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -19.49 17.494 0
vertex -20.445 13.982 0
vertex -24.968 11.507 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -20.445 13.982 0
vertex -20.862 13.72 0
vertex -24.968 11.507 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -21.472 12.955 0
vertex -24.968 11.507 0
vertex -21.21 13.372 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.472 12.955 0
vertex -21.635 12.49 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -24.968 11.507 0
vertex -21.635 12.49 0
vertex -21.69 12 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -19.737 6.506 0
vertex -24.968 11.507 0
vertex -19.49 6.506 0
endloop
endfacet
facet normal -0.999006 0.0445804 0
outer loop
vertex -24.99 12 0
vertex -24.99 12 4
vertex -24.968 12.493 0
endloop
endfacet
facet normal -0.999006 0.0445804 0
outer loop
vertex -24.968 12.493 0
vertex -24.99 12 4
vertex -24.968 12.493 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.968 12.493 4
vertex -24.99 12 4
vertex -24.968 11.507 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.792 10.537 4
vertex -24.968 12.493 4
vertex -24.902 11.018 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.902 11.018 4
vertex -24.968 12.493 4
vertex -24.968 11.507 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.639 10.067 4
vertex -24.968 12.493 4
vertex -24.792 10.537 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.445 9.614 4
vertex -24.968 12.493 4
vertex -24.639 10.067 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.211 9.179 4
vertex -24.968 12.493 4
vertex -24.445 9.614 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -23.94 8.767 4
vertex -24.968 12.493 4
vertex -24.211 9.179 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -23.632 8.381 4
vertex -24.968 12.493 4
vertex -23.94 8.767 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -23.291 8.025 4
vertex -24.968 12.493 4
vertex -23.632 8.381 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -22.919 7.7 4
vertex -24.968 12.493 4
vertex -23.291 8.025 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -22.52 7.41 4
vertex -24.968 12.493 4
vertex -22.919 7.7 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -22.096 7.157 4
vertex -24.968 12.493 4
vertex -22.52 7.41 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.652 6.943 4
vertex -24.968 12.493 4
vertex -22.096 7.157 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.19 6.769 4
vertex -24.968 12.493 4
vertex -21.652 6.943 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -20.714 6.638 4
vertex -24.968 12.493 4
vertex -21.19 6.769 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -20.228 6.55 4
vertex -24.968 12.493 4
vertex -20.714 6.638 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.737 6.506 4
vertex -24.968 12.493 4
vertex -20.228 6.55 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.49 6.506 4
vertex -24.968 12.493 4
vertex -19.737 6.506 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -20.445 10.018 4
vertex -24.968 12.493 4
vertex -19.49 6.506 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 6.5 4
vertex -19.49 6.506 4
vertex -19.49 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -20.862 10.28 4
vertex -21.21 10.628 4
vertex -24.968 12.493 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.49 17.494 4
vertex -24.968 12.493 4
vertex -12 17.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.49 17.5 4
vertex -12 17.5 4
vertex -11.99 17.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.49 17.5 4
vertex -19.49 17.494 4
vertex -12 17.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.98 14.145 4
vertex -19.49 14.2 4
vertex -12 17.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -20.228 17.45 4
vertex -24.968 12.493 4
vertex -19.737 17.494 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -20.714 17.362 4
vertex -24.968 12.493 4
vertex -20.228 17.45 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.19 17.231 4
vertex -24.968 12.493 4
vertex -20.714 17.362 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.652 17.057 4
vertex -24.968 12.493 4
vertex -21.19 17.231 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -22.096 16.843 4
vertex -24.968 12.493 4
vertex -21.652 17.057 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -22.52 16.59 4
vertex -24.968 12.493 4
vertex -22.096 16.843 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -22.919 16.3 4
vertex -24.968 12.493 4
vertex -22.52 16.59 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -23.291 15.975 4
vertex -24.968 12.493 4
vertex -22.919 16.3 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -23.632 15.619 4
vertex -24.968 12.493 4
vertex -23.291 15.975 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -23.94 15.233 4
vertex -24.968 12.493 4
vertex -23.632 15.619 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.211 14.821 4
vertex -24.968 12.493 4
vertex -23.94 15.233 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.445 14.386 4
vertex -24.968 12.493 4
vertex -24.211 14.821 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.639 13.933 4
vertex -24.968 12.493 4
vertex -24.445 14.386 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.792 13.463 4
vertex -24.968 12.493 4
vertex -24.639 13.933 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -24.902 12.982 4
vertex -24.968 12.493 4
vertex -24.792 13.463 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.69 12 4
vertex -24.968 12.493 4
vertex -21.635 11.51 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.635 12.49 4
vertex -24.968 12.493 4
vertex -21.69 12 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -17.49 14.2 4
vertex -17 14.145 4
vertex -12 17.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.472 12.955 4
vertex -24.968 12.493 4
vertex -21.635 12.49 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -15.29 12 4
vertex -15.345 11.51 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.21 13.372 4
vertex -24.968 12.493 4
vertex -21.472 12.955 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -17.49 9.8 4
vertex -19.49 9.8 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -20.862 13.72 4
vertex -24.968 12.493 4
vertex -21.21 13.372 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -20.445 13.982 4
vertex -24.968 12.493 4
vertex -20.862 13.72 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 17.5 4
vertex -24.968 12.493 4
vertex -20.445 13.982 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 17.5 4
vertex -20.445 13.982 4
vertex -19.98 14.145 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -15.508 12.955 4
vertex -15.345 12.49 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 17.5 4
vertex -17 14.145 4
vertex -16.535 13.982 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 17.5 4
vertex -16.535 13.982 4
vertex -16.118 13.72 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -15.345 12.49 4
vertex -15.29 12 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 17.5 4
vertex -16.118 13.72 4
vertex -15.77 13.372 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 17.5 4
vertex -15.508 12.955 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 17.5 4
vertex -15.77 13.372 4
vertex -15.508 12.955 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -15.345 11.51 4
vertex -15.508 11.045 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -15.508 11.045 4
vertex -15.77 10.628 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -15.77 10.628 4
vertex -16.118 10.28 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -16.118 10.28 4
vertex -16.535 10.018 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -16.535 10.018 4
vertex -17 9.855 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -17 9.855 4
vertex -17.49 9.8 4
vertex -12 6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 6.5 4
vertex -19.49 9.8 4
vertex -19.49 6.506 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.49 9.8 4
vertex -19.98 9.855 4
vertex -19.49 6.506 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.98 9.855 4
vertex -20.445 10.018 4
vertex -19.49 6.506 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -20.862 10.28 4
vertex -24.968 12.493 4
vertex -20.445 10.018 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.21 10.628 4
vertex -21.472 11.045 4
vertex -24.968 12.493 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -21.635 11.51 4
vertex -24.968 12.493 4
vertex -21.472 11.045 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.49 17.494 4
vertex -19.737 17.494 4
vertex -24.968 12.493 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -19.49 14.2 4
vertex -17.49 14.2 4
vertex -12 17.5 4
endloop
endfacet
facet normal -0.991014 -0.133757 0
outer loop
vertex -24.968 11.507 0
vertex -24.902 11.018 0
vertex -24.968 11.507 4
endloop
endfacet
facet normal -0.991014 -0.133757 0
outer loop
vertex -24.968 11.507 4
vertex -24.902 11.018 0
vertex -24.902 11.018 4
endloop
endfacet
facet normal -0.974833 -0.222935 0
outer loop
vertex -24.902 11.018 0
vertex -24.792 10.537 0
vertex -24.902 11.018 4
endloop
endfacet
facet normal -0.974833 -0.222935 0
outer loop
vertex -24.902 11.018 4
vertex -24.792 10.537 0
vertex -24.792 10.537 4
endloop
endfacet
facet normal -0.950885 -0.309544 0
outer loop
vertex -24.792 10.537 0
vertex -24.639 10.067 0
vertex -24.792 10.537 4
endloop
endfacet
facet normal -0.950885 -0.309544 0
outer loop
vertex -24.792 10.537 4
vertex -24.639 10.067 0
vertex -24.639 10.067 4
endloop
endfacet
facet normal -0.91925 -0.393674 0
outer loop
vertex -24.639 10.067 0
vertex -24.445 9.614 0
vertex -24.639 10.067 4
endloop
endfacet
facet normal -0.91925 -0.393674 0
outer loop
vertex -24.639 10.067 4
vertex -24.445 9.614 0
vertex -24.445 9.614 4
endloop
endfacet
facet normal -0.880666 -0.473738 0
outer loop
vertex -24.445 9.614 0
vertex -24.211 9.179 0
vertex -24.445 9.614 4
endloop
endfacet
facet normal -0.880666 -0.473738 0
outer loop
vertex -24.445 9.614 4
vertex -24.211 9.179 0
vertex -24.211 9.179 4
endloop
endfacet
facet normal -0.835466 -0.549542 0
outer loop
vertex -24.211 9.179 0
vertex -23.94 8.767 0
vertex -24.211 9.179 4
endloop
endfacet
facet normal -0.835466 -0.549542 0
outer loop
vertex -24.211 9.179 4
vertex -23.94 8.767 0
vertex -23.94 8.767 4
endloop
endfacet
facet normal -0.781658 -0.623707 0
outer loop
vertex -23.94 8.767 0
vertex -23.632 8.381 0
vertex -23.94 8.767 4
endloop
endfacet
facet normal -0.781658 -0.623707 0
outer loop
vertex -23.94 8.767 4
vertex -23.632 8.381 0
vertex -23.632 8.381 4
endloop
endfacet
facet normal -0.722157 -0.691729 0
outer loop
vertex -23.632 8.381 0
vertex -23.291 8.025 0
vertex -23.632 8.381 4
endloop
endfacet
facet normal -0.722157 -0.691729 0
outer loop
vertex -23.632 8.381 4
vertex -23.291 8.025 0
vertex -23.291 8.025 4
endloop
endfacet
facet normal -0.657931 -0.753078 0
outer loop
vertex -23.291 8.025 4
vertex -23.291 8.025 0
vertex -22.919 7.7 0
endloop
endfacet
facet normal -0.657931 -0.753078 0
outer loop
vertex -22.919 7.7 4
vertex -23.291 8.025 4
vertex -22.919 7.7 0
endloop
endfacet
facet normal -0.587931 -0.808911 0
outer loop
vertex -22.919 7.7 4
vertex -22.919 7.7 0
vertex -22.52 7.41 0
endloop
endfacet
facet normal -0.587931 -0.808911 0
outer loop
vertex -22.52 7.41 4
vertex -22.919 7.7 4
vertex -22.52 7.41 0
endloop
endfacet
facet normal -0.512409 -0.858741 0
outer loop
vertex -22.52 7.41 4
vertex -22.52 7.41 0
vertex -22.096 7.157 0
endloop
endfacet
facet normal -0.512409 -0.858741 0
outer loop
vertex -22.096 7.157 4
vertex -22.52 7.41 4
vertex -22.096 7.157 0
endloop
endfacet
facet normal -0.434182 -0.900825 0
outer loop
vertex -22.096 7.157 4
vertex -22.096 7.157 0
vertex -21.652 6.943 0
endloop
endfacet
facet normal -0.434182 -0.900825 0
outer loop
vertex -21.652 6.943 4
vertex -22.096 7.157 4
vertex -21.652 6.943 0
endloop
endfacet
facet normal -0.352455 -0.935829 0
outer loop
vertex -21.652 6.943 4
vertex -21.652 6.943 0
vertex -21.19 6.769 0
endloop
endfacet
facet normal -0.352455 -0.935829 0
outer loop
vertex -21.19 6.769 4
vertex -21.652 6.943 4
vertex -21.19 6.769 0
endloop
endfacet
facet normal -0.265345 -0.964154 0
outer loop
vertex -21.19 6.769 4
vertex -21.19 6.769 0
vertex -20.714 6.638 0
endloop
endfacet
facet normal -0.265345 -0.964154 0
outer loop
vertex -20.714 6.638 4
vertex -21.19 6.769 4
vertex -20.714 6.638 0
endloop
endfacet
facet normal -0.178173 -0.983999 0
outer loop
vertex -20.714 6.638 4
vertex -20.714 6.638 0
vertex -20.228 6.55 0
endloop
endfacet
facet normal -0.178173 -0.983999 0
outer loop
vertex -20.228 6.55 4
vertex -20.714 6.638 4
vertex -20.228 6.55 0
endloop
endfacet
facet normal -0.0892554 -0.996009 0
outer loop
vertex -20.228 6.55 4
vertex -20.228 6.55 0
vertex -19.737 6.506 0
endloop
endfacet
facet normal -0.0892554 -0.996009 0
outer loop
vertex -19.737 6.506 4
vertex -20.228 6.55 4
vertex -19.737 6.506 0
endloop
endfacet
facet normal -1.22461e-016 -1 0
outer loop
vertex -19.737 6.506 4
vertex -19.737 6.506 0
vertex -19.49 6.506 0
endloop
endfacet
facet normal -1.22461e-016 -1 0
outer loop
vertex -19.49 6.506 4
vertex -19.737 6.506 4
vertex -19.49 6.506 0
endloop
endfacet
facet normal -1 1.22461e-016 0
outer loop
vertex -19.49 6.5 0
vertex -19.49 6.5 4
vertex -19.49 6.506 0
endloop
endfacet
facet normal -1 1.22461e-016 0
outer loop
vertex -19.49 6.506 0
vertex -19.49 6.5 4
vertex -19.49 6.506 4
endloop
endfacet
facet normal -1.22461e-016 -1 0
outer loop
vertex -12 6.5 3.33333e-007
vertex -19.49 6.5 0
vertex -11.99 6.5 0
endloop
endfacet
facet normal -1.22461e-016 -1 0
outer loop
vertex -12 6.5 3.33333e-007
vertex -12 6.5 4
vertex -19.49 6.5 4
endloop
endfacet
facet normal -1.22461e-016 -1 0
outer loop
vertex -19.49 6.5 4
vertex -19.49 6.5 0
vertex -12 6.5 3.33333e-007
endloop
endfacet
facet normal -1.22461e-016 -1 0
outer loop
vertex -11.99 6.5 3.33333e-007
vertex -12 6.5 3.33333e-007
vertex -11.99 6.5 0
endloop
endfacet
facet normal 1 -1.22461e-016 0
outer loop
vertex -11.99 6.5 3.33333e-007
vertex -11.99 6.5 0
vertex -11.99 17.5 0
endloop
endfacet
facet normal 1 -1.22461e-016 0
outer loop
vertex -11.99 17.5 3.33333e-007
vertex -11.99 6.5 3.33333e-007
vertex -11.99 17.5 0
endloop
endfacet
facet normal 1.22461e-016 1 0
outer loop
vertex -19.49 17.5 0
vertex -19.49 17.5 4
vertex -11.99 17.5 0
endloop
endfacet
facet normal 1.22461e-016 1 0
outer loop
vertex -11.99 17.5 3.33333e-007
vertex -19.49 17.5 4
vertex -11.99 17.5 4
endloop
endfacet
facet normal 1.22461e-016 1 0
outer loop
vertex -11.99 17.5 0
vertex -19.49 17.5 4
vertex -11.99 17.5 3.33333e-007
endloop
endfacet
facet normal -1 1.22461e-016 0
outer loop
vertex -19.49 17.494 0
vertex -19.49 17.494 4
vertex -19.49 17.5 0
endloop
endfacet
facet normal -1 1.22461e-016 0
outer loop
vertex -19.49 17.5 0
vertex -19.49 17.494 4
vertex -19.49 17.5 4
endloop
endfacet
facet normal 1.22461e-016 1 0
outer loop
vertex -19.737 17.494 0
vertex -19.737 17.494 4
vertex -19.49 17.494 0
endloop
endfacet
facet normal 1.22461e-016 1 0
outer loop
vertex -19.49 17.494 0
vertex -19.737 17.494 4
vertex -19.49 17.494 4
endloop
endfacet
facet normal -0.0892554 0.996009 0
outer loop
vertex -20.228 17.45 0
vertex -20.228 17.45 4
vertex -19.737 17.494 0
endloop
endfacet
facet normal -0.0892554 0.996009 0
outer loop
vertex -19.737 17.494 0
vertex -20.228 17.45 4
vertex -19.737 17.494 4
endloop
endfacet
facet normal -0.178173 0.983999 0
outer loop
vertex -20.714 17.362 0
vertex -20.714 17.362 4
vertex -20.228 17.45 0
endloop
endfacet
facet normal -0.178173 0.983999 0
outer loop
vertex -20.228 17.45 0
vertex -20.714 17.362 4
vertex -20.228 17.45 4
endloop
endfacet
facet normal -0.265345 0.964154 0
outer loop
vertex -21.19 17.231 0
vertex -21.19 17.231 4
vertex -20.714 17.362 0
endloop
endfacet
facet normal -0.265345 0.964154 0
outer loop
vertex -20.714 17.362 0
vertex -21.19 17.231 4
vertex -20.714 17.362 4
endloop
endfacet
facet normal -0.352455 0.935829 0
outer loop
vertex -21.652 17.057 0
vertex -21.652 17.057 4
vertex -21.19 17.231 0
endloop
endfacet
facet normal -0.352455 0.935829 0
outer loop
vertex -21.19 17.231 0
vertex -21.652 17.057 4
vertex -21.19 17.231 4
endloop
endfacet
facet normal -0.434182 0.900825 0
outer loop
vertex -22.096 16.843 0
vertex -22.096 16.843 4
vertex -21.652 17.057 0
endloop
endfacet
facet normal -0.434182 0.900825 0
outer loop
vertex -21.652 17.057 0
vertex -22.096 16.843 4
vertex -21.652 17.057 4
endloop
endfacet
facet normal -0.512409 0.858741 0
outer loop
vertex -22.52 16.59 0
vertex -22.52 16.59 4
vertex -22.096 16.843 0
endloop
endfacet
facet normal -0.512409 0.858741 0
outer loop
vertex -22.096 16.843 0
vertex -22.52 16.59 4
vertex -22.096 16.843 4
endloop
endfacet
facet normal -0.587931 0.808911 0
outer loop
vertex -22.919 16.3 0
vertex -22.919 16.3 4
vertex -22.52 16.59 0
endloop
endfacet
facet normal -0.587931 0.808911 0
outer loop
vertex -22.52 16.59 0
vertex -22.919 16.3 4
vertex -22.52 16.59 4
endloop
endfacet
facet normal -0.657931 0.753078 0
outer loop
vertex -23.291 15.975 0
vertex -23.291 15.975 4
vertex -22.919 16.3 0
endloop
endfacet
facet normal -0.657931 0.753078 0
outer loop
vertex -22.919 16.3 0
vertex -23.291 15.975 4
vertex -22.919 16.3 4
endloop
endfacet
facet normal -0.722157 0.691729 0
outer loop
vertex -23.632 15.619 0
vertex -23.632 15.619 4
vertex -23.291 15.975 0
endloop
endfacet
facet normal -0.722157 0.691729 0
outer loop
vertex -23.291 15.975 0
vertex -23.632 15.619 4
vertex -23.291 15.975 4
endloop
endfacet
facet normal -0.781658 0.623707 0
outer loop
vertex -23.94 15.233 0
vertex -23.94 15.233 4
vertex -23.632 15.619 0
endloop
endfacet
facet normal -0.781658 0.623707 0
outer loop
vertex -23.632 15.619 0
vertex -23.94 15.233 4
vertex -23.632 15.619 4
endloop
endfacet
facet normal -0.835466 0.549542 0
outer loop
vertex -24.211 14.821 0
vertex -24.211 14.821 4
vertex -23.94 15.233 0
endloop
endfacet
facet normal -0.835466 0.549542 0
outer loop
vertex -23.94 15.233 0
vertex -24.211 14.821 4
vertex -23.94 15.233 4
endloop
endfacet
facet normal -0.880666 0.473738 0
outer loop
vertex -24.445 14.386 0
vertex -24.445 14.386 4
vertex -24.211 14.821 0
endloop
endfacet
facet normal -0.880666 0.473738 0
outer loop
vertex -24.211 14.821 0
vertex -24.445 14.386 4
vertex -24.211 14.821 4
endloop
endfacet
facet normal -0.91925 0.393674 0
outer loop
vertex -24.639 13.933 0
vertex -24.639 13.933 4
vertex -24.445 14.386 0
endloop
endfacet
facet normal -0.91925 0.393674 0
outer loop
vertex -24.445 14.386 0
vertex -24.639 13.933 4
vertex -24.445 14.386 4
endloop
endfacet
facet normal -0.950885 0.309544 0
outer loop
vertex -24.792 13.463 0
vertex -24.792 13.463 4
vertex -24.639 13.933 0
endloop
endfacet
facet normal -0.950885 0.309544 0
outer loop
vertex -24.639 13.933 0
vertex -24.792 13.463 4
vertex -24.639 13.933 4
endloop
endfacet
facet normal -0.974833 0.222935 0
outer loop
vertex -24.902 12.982 0
vertex -24.902 12.982 4
vertex -24.792 13.463 0
endloop
endfacet
facet normal -0.974833 0.222935 0
outer loop
vertex -24.792 13.463 0
vertex -24.902 12.982 4
vertex -24.792 13.463 4
endloop
endfacet
facet normal -0.991014 0.133757 0
outer loop
vertex -24.968 12.493 0
vertex -24.968 12.493 4
vertex -24.902 12.982 0
endloop
endfacet
facet normal -0.991014 0.133757 0
outer loop
vertex -24.902 12.982 0
vertex -24.968 12.493 4
vertex -24.902 12.982 4
endloop
endfacet
facet normal 0.993759 -0.111544 0
outer loop
vertex -21.69 12 4
vertex -21.69 12 0
vertex -21.635 12.49 0
endloop
endfacet
facet normal 0.993759 -0.111544 0
outer loop
vertex -21.635 12.49 4
vertex -21.69 12 4
vertex -21.635 12.49 0
endloop
endfacet
facet normal 0.993759 0.111544 0
outer loop
vertex -21.635 11.51 0
vertex -21.69 12 0
vertex -21.69 12 4
endloop
endfacet
facet normal 0.993759 0.111544 0
outer loop
vertex -21.635 11.51 4
vertex -21.635 11.51 0
vertex -21.69 12 4
endloop
endfacet
facet normal 0.9437 -0.330802 0
outer loop
vertex -21.635 12.49 4
vertex -21.635 12.49 0
vertex -21.472 12.955 0
endloop
endfacet
facet normal 0.9437 -0.330802 0
outer loop
vertex -21.472 12.955 4
vertex -21.635 12.49 4
vertex -21.472 12.955 0
endloop
endfacet
facet normal 0.846741 -0.532005 0
outer loop
vertex -21.472 12.955 4
vertex -21.472 12.955 0
vertex -21.21 13.372 0
endloop
endfacet
facet normal 0.846741 -0.532005 0
outer loop
vertex -21.21 13.372 4
vertex -21.472 12.955 4
vertex -21.21 13.372 0
endloop
endfacet
facet normal 0.707107 -0.707107 0
outer loop
vertex -21.21 13.372 4
vertex -21.21 13.372 0
vertex -20.862 13.72 0
endloop
endfacet
facet normal 0.707107 -0.707107 0
outer loop
vertex -20.862 13.72 4
vertex -21.21 13.372 4
vertex -20.862 13.72 0
endloop
endfacet
facet normal 0.532005 -0.846741 0
outer loop
vertex -20.862 13.72 4
vertex -20.862 13.72 0
vertex -20.445 13.982 0
endloop
endfacet
facet normal 0.532005 -0.846741 0
outer loop
vertex -20.445 13.982 4
vertex -20.862 13.72 4
vertex -20.445 13.982 0
endloop
endfacet
facet normal 0.330802 -0.9437 0
outer loop
vertex -20.445 13.982 4
vertex -20.445 13.982 0
vertex -19.98 14.145 0
endloop
endfacet
facet normal 0.330802 -0.9437 0
outer loop
vertex -19.98 14.145 4
vertex -20.445 13.982 4
vertex -19.98 14.145 0
endloop
endfacet
facet normal 0.111544 -0.993759 0
outer loop
vertex -19.98 14.145 4
vertex -19.98 14.145 0
vertex -19.49 14.2 0
endloop
endfacet
facet normal 0.111544 -0.993759 0
outer loop
vertex -19.49 14.2 4
vertex -19.98 14.145 4
vertex -19.49 14.2 0
endloop
endfacet
facet normal -1.22461e-016 -1 0
outer loop
vertex -19.49 14.2 4
vertex -19.49 14.2 0
vertex -17.49 14.2 0
endloop
endfacet
facet normal -1.22461e-016 -1 0
outer loop
vertex -17.49 14.2 4
vertex -19.49 14.2 4
vertex -17.49 14.2 0
endloop
endfacet
facet normal -0.111544 -0.993759 0
outer loop
vertex -17.49 14.2 4
vertex -17.49 14.2 0
vertex -17 14.145 0
endloop
endfacet
facet normal -0.111544 -0.993759 0
outer loop
vertex -17 14.145 4
vertex -17.49 14.2 4
vertex -17 14.145 0
endloop
endfacet
facet normal -0.330802 -0.9437 0
outer loop
vertex -17 14.145 4
vertex -17 14.145 0
vertex -16.535 13.982 0
endloop
endfacet
facet normal -0.330802 -0.9437 0
outer loop
vertex -16.535 13.982 4
vertex -17 14.145 4
vertex -16.535 13.982 0
endloop
endfacet
facet normal -0.532005 -0.846741 0
outer loop
vertex -16.535 13.982 4
vertex -16.535 13.982 0
vertex -16.118 13.72 0
endloop
endfacet
facet normal -0.532005 -0.846741 0
outer loop
vertex -16.118 13.72 4
vertex -16.535 13.982 4
vertex -16.118 13.72 0
endloop
endfacet
facet normal -0.707107 -0.707107 0
outer loop
vertex -16.118 13.72 4
vertex -16.118 13.72 0
vertex -15.77 13.372 0
endloop
endfacet
facet normal -0.707107 -0.707107 0
outer loop
vertex -15.77 13.372 4
vertex -16.118 13.72 4
vertex -15.77 13.372 0
endloop
endfacet
facet normal -0.846741 -0.532005 0
outer loop
vertex -15.77 13.372 0
vertex -15.508 12.955 0
vertex -15.77 13.372 4
endloop
endfacet
facet normal -0.846741 -0.532005 0
outer loop
vertex -15.77 13.372 4
vertex -15.508 12.955 0
vertex -15.508 12.955 4
endloop
endfacet
facet normal -0.9437 -0.330802 0
outer loop
vertex -15.508 12.955 0
vertex -15.345 12.49 0
vertex -15.508 12.955 4
endloop
endfacet
facet normal -0.9437 -0.330802 0
outer loop
vertex -15.508 12.955 4
vertex -15.345 12.49 0
vertex -15.345 12.49 4
endloop
endfacet
facet normal -0.993759 -0.111544 0
outer loop
vertex -15.345 12.49 0
vertex -15.29 12 0
vertex -15.345 12.49 4
endloop
endfacet
facet normal -0.993759 -0.111544 0
outer loop
vertex -15.345 12.49 4
vertex -15.29 12 0
vertex -15.29 12 4
endloop
endfacet
facet normal -0.993759 0.111544 0
outer loop
vertex -15.345 11.51 0
vertex -15.345 11.51 4
vertex -15.29 12 0
endloop
endfacet
facet normal -0.993759 0.111544 0
outer loop
vertex -15.29 12 0
vertex -15.345 11.51 4
vertex -15.29 12 4
endloop
endfacet
facet normal -0.9437 0.330802 0
outer loop
vertex -15.508 11.045 0
vertex -15.508 11.045 4
vertex -15.345 11.51 0
endloop
endfacet
facet normal -0.9437 0.330802 0
outer loop
vertex -15.345 11.51 0
vertex -15.508 11.045 4
vertex -15.345 11.51 4
endloop
endfacet
facet normal -0.846741 0.532005 0
outer loop
vertex -15.77 10.628 0
vertex -15.77 10.628 4
vertex -15.508 11.045 0
endloop
endfacet
facet normal -0.846741 0.532005 0
outer loop
vertex -15.508 11.045 0
vertex -15.77 10.628 4
vertex -15.508 11.045 4
endloop
endfacet
facet normal -0.707107 0.707107 0
outer loop
vertex -16.118 10.28 0
vertex -16.118 10.28 4
vertex -15.77 10.628 0
endloop
endfacet
facet normal -0.707107 0.707107 0
outer loop
vertex -15.77 10.628 0
vertex -16.118 10.28 4
vertex -15.77 10.628 4
endloop
endfacet
facet normal -0.532005 0.846741 0
outer loop
vertex -16.535 10.018 0
vertex -16.535 10.018 4
vertex -16.118 10.28 0
endloop
endfacet
facet normal -0.532005 0.846741 0
outer loop
vertex -16.118 10.28 0
vertex -16.535 10.018 4
vertex -16.118 10.28 4
endloop
endfacet
facet normal -0.330802 0.9437 0
outer loop
vertex -17 9.855 0
vertex -17 9.855 4
vertex -16.535 10.018 0
endloop
endfacet
facet normal -0.330802 0.9437 0
outer loop
vertex -16.535 10.018 0
vertex -17 9.855 4
vertex -16.535 10.018 4
endloop
endfacet
facet normal -0.111544 0.993759 0
outer loop
vertex -17.49 9.8 0
vertex -17.49 9.8 4
vertex -17 9.855 0
endloop
endfacet
facet normal -0.111544 0.993759 0
outer loop
vertex -17 9.855 0
vertex -17.49 9.8 4
vertex -17 9.855 4
endloop
endfacet
facet normal 1.22461e-016 1 0
outer loop
vertex -19.49 9.8 0
vertex -19.49 9.8 4
vertex -17.49 9.8 0
endloop
endfacet
facet normal 1.22461e-016 1 0
outer loop
vertex -17.49 9.8 0
vertex -19.49 9.8 4
vertex -17.49 9.8 4
endloop
endfacet
facet normal 0.111544 0.993759 0
outer loop
vertex -19.98 9.855 0
vertex -19.98 9.855 4
vertex -19.49 9.8 0
endloop
endfacet
facet normal 0.111544 0.993759 0
outer loop
vertex -19.49 9.8 0
vertex -19.98 9.855 4
vertex -19.49 9.8 4
endloop
endfacet
facet normal 0.330802 0.9437 0
outer loop
vertex -20.445 10.018 0
vertex -20.445 10.018 4
vertex -19.98 9.855 0
endloop
endfacet
facet normal 0.330802 0.9437 0
outer loop
vertex -19.98 9.855 0
vertex -20.445 10.018 4
vertex -19.98 9.855 4
endloop
endfacet
facet normal 0.532005 0.846741 0
outer loop
vertex -20.862 10.28 0
vertex -20.862 10.28 4
vertex -20.445 10.018 0
endloop
endfacet
facet normal 0.532005 0.846741 0
outer loop
vertex -20.445 10.018 0
vertex -20.862 10.28 4
vertex -20.445 10.018 4
endloop
endfacet
facet normal 0.707107 0.707107 0
outer loop
vertex -20.862 10.28 0
vertex -21.21 10.628 0
vertex -21.21 10.628 4
endloop
endfacet
facet normal 0.707107 0.707107 0
outer loop
vertex -20.862 10.28 4
vertex -20.862 10.28 0
vertex -21.21 10.628 4
endloop
endfacet
facet normal 0.846741 0.532005 0
outer loop
vertex -21.21 10.628 0
vertex -21.472 11.045 0
vertex -21.472 11.045 4
endloop
endfacet
facet normal 0.846741 0.532005 0
outer loop
vertex -21.21 10.628 4
vertex -21.21 10.628 0
vertex -21.472 11.045 4
endloop
endfacet
facet normal 0.9437 0.330802 0
outer loop
vertex -21.472 11.045 0
vertex -21.635 11.51 0
vertex -21.635 11.51 4
endloop
endfacet
facet normal 0.9437 0.330802 0
outer loop
vertex -21.472 11.045 4
vertex -21.472 11.045 0
vertex -21.635 11.51 4
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 4
vertex -12 17.5 6.3
vertex -11.99 17.5 4
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -11.99 17.5 4
vertex -12 17.5 6.3
vertex 12 17.5 6.3
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -11.99 17.5 4
vertex 12 17.5 6.3
vertex 12 17.5 3.33333e-007
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -11.99 17.5 4
vertex 12 17.5 3.33333e-007
vertex -11.99 17.5 3.33333e-007
endloop
endfacet
facet normal -1 0 0
outer loop
vertex -12 -17.5 15.6
vertex -12 -17.5 19.9667
vertex -12 -14.5 15.6
endloop
endfacet
facet normal -1 0 0
outer loop
vertex -12 -14.5 15.6
vertex -12 -17.5 19.9667
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -1 0 0
outer loop
vertex -12 -14.5 15.6
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 19.9667
vertex -12 -1.75 16.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -1 0 0
outer loop
vertex -12 -14.5 15.6
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 16.8
vertex -12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 16.8
vertex -12 1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex -12 17.5 19.9667
endloop
endfacet
facet normal -1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 16.8
2012-03-12 02:54:18 +00:00
vertex -12 17.5 19.9667
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 9.6048
2012-03-12 02:54:18 +00:00
vertex -12 17.5 19.9667
vertex -12 17.5 9.8
endloop
endfacet
facet normal -1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 9.6048
2012-03-12 02:54:18 +00:00
vertex -12 17.5 9.8
vertex -12 17.5 6.3
endloop
endfacet
facet normal -1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 9.6048
2012-03-12 02:54:18 +00:00
vertex -12 17.5 6.3
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
vertex -12 17.5 6.3
vertex -12 17.5 4
endloop
endfacet
facet normal -1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
vertex -12 17.5 4
vertex -12 6.5 4
endloop
endfacet
facet normal -1 0 0
outer loop
vertex -12 -14.5 15.6
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
vertex -12 6.5 4
endloop
endfacet
facet normal -1 0 0
outer loop
vertex -12 -14.5 15.6
vertex -12 6.5 4
vertex -12 6.5 3.33333e-007
endloop
endfacet
facet normal -1 0 0
outer loop
vertex -12 -14.5 15.6
vertex -12 6.5 3.33333e-007
vertex -12 -14.5 3.33333e-007
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -12 -14.5 3.33333e-007
vertex -12 6.5 3.33333e-007
vertex -11.99 6.5 3.33333e-007
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -11.99 6.5 3.33333e-007
vertex -11.99 17.5 3.33333e-007
vertex 12 17.5 3.33333e-007
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -11.99 6.5 3.33333e-007
vertex 12 17.5 3.33333e-007
vertex -12 -14.5 3.33333e-007
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 11.99 -6.5 3.33333e-007
vertex 12 17.5 3.33333e-007
vertex 12 -6.5 3.33333e-007
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -12 -14.5 3.33333e-007
vertex 12 17.5 3.33333e-007
vertex 11.99 -6.5 3.33333e-007
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 11.99 -17.5 3.33333e-007
vertex -12 -14.5 3.33333e-007
vertex 11.99 -6.5 3.33333e-007
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -12 -14.5 3.33333e-007
vertex 11.99 -17.5 3.33333e-007
vertex -12 -17.5 3.33333e-007
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 -6.5 4
vertex 12 17.5 3.33333e-007
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 -6.5 4
vertex 12 -17.5 9.8
vertex 12 -17.5 6.3
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 -17.5 4
vertex 12 -6.5 4
vertex 12 -17.5 6.3
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 -6.5 3.33333e-007
vertex 12 17.5 3.33333e-007
vertex 12 -6.5 4
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 17.5 3.33333e-007
vertex 12 17.5 6.3
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 16.8
2012-03-12 02:54:18 +00:00
vertex 12 17.5 19.9667
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 17.5 6.3
vertex 12 17.5 9.8
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 17.5 6.3
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 17.5 6.3
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 9.6048
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 -17.5 19.9667
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 16.8
vertex 12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 12 -17.5 19.9667
vertex 12 -17.5 9.8
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 16.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 16.8
2012-03-12 02:54:18 +00:00
vertex 12 17.5 9.8
vertex 12 17.5 19.9667
endloop
endfacet
facet normal 1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 16.8
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
vertex 12 17.5 9.8
endloop
endfacet
facet normal 1 0 0
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 9.6048
vertex 12 -1.75 16.8
2012-03-12 02:54:18 +00:00
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -13.4 -14.5 8.88178e-016
vertex -13.4 -14.5 15.6
vertex -12 -14.5 8.88178e-016
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 -14.5 3.33333e-007
vertex -13.4 -14.5 15.6
vertex -12 -14.5 15.6
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 -14.5 8.88178e-016
vertex -13.4 -14.5 15.6
vertex -12 -14.5 3.33333e-007
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -13.4 -14.5 15.6
vertex -13.4 -17.5 15.6
vertex -12 -17.5 15.6
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 -14.5 15.6
vertex -13.4 -14.5 15.6
vertex -12 -17.5 15.6
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 6.3
vertex -12 17.5 9.8
vertex 12 17.5 6.3
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 12 17.5 6.3
vertex -12 17.5 9.8
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 6.40923 17.5 9.8
vertex -12 17.5 9.8
vertex -6.40923 17.5 9.8
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -6.40923 14.7 9.8
vertex 6.40923 14.7 9.8
vertex -6.40923 17.5 9.8
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 6.40923 14.7 9.8
vertex 6.40923 17.5 9.8
vertex -6.40923 17.5 9.8
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 6.40923 17.5 9.8
vertex 12 17.5 9.8
vertex -12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -9.17629 17.5 19.2588
vertex -12 17.5 19.9667
vertex -8.9531 17.5 19.9667
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -9.35567 17.5 18.4497
vertex -12 17.5 19.9667
vertex -9.17629 17.5 19.2588
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -9.46385 17.5 17.628
vertex -12 17.5 19.9667
vertex -9.35567 17.5 18.4497
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -9.5 17.5 16.8
vertex -12 17.5 19.9667
vertex -9.46385 17.5 17.628
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -9.46385 17.5 15.972
vertex -12 17.5 19.9667
vertex -9.5 17.5 16.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 9.8
vertex -12 17.5 19.9667
vertex -9.35567 17.5 15.1503
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 9.8
vertex -9.35567 17.5 15.1503
vertex -9.17629 17.5 14.3412
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 9.8
vertex -9.17629 17.5 14.3412
vertex -8.92708 17.5 13.5508
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 9.8
vertex -8.92708 17.5 13.5508
vertex -8.60992 17.5 12.7851
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 9.8
vertex -8.60992 17.5 12.7851
vertex -8.22724 17.5 12.05
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 9.8
vertex -8.22724 17.5 12.05
vertex -7.78194 17.5 11.351
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 9.8
vertex -7.78194 17.5 11.351
vertex -7.27742 17.5 10.6935
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 9.8
vertex -7.27742 17.5 10.6935
vertex -6.71751 17.5 10.0825
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -12 17.5 9.8
vertex -6.71751 17.5 10.0825
vertex -6.40923 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -9.35567 17.5 15.1503
vertex -12 17.5 19.9667
vertex -9.46385 17.5 15.972
endloop
endfacet
facet normal 0 0 1
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex -12 -17.5 19.9667
vertex -8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5719 1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex -9.47687 8.75 19.9667
vertex -8.9531 17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -9.47687 -8.75 19.9667
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex -8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -8.9531 -8.75 19.9667
vertex -9.47687 -8.75 19.9667
vertex -8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5719 1.75 19.9667
vertex -11.5719 -1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex -9.47687 8.75 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -8.9531 17.5 19.9667
vertex -9.47687 8.75 19.9667
vertex -8.9531 8.75 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -12 17.5 19.9667
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex -8.9531 17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 19.9667
vertex -11.5719 1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex -8.9531 17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -9.47687 -8.75 19.9667
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5719 -1.75 19.9667
vertex -12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -9.47687 -8.75 19.9667
vertex -9.47687 8.75 19.9667
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5719 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 19.9667
vertex -11.8177 1.75 18.8838
vertex -11.5911 1.75 19.9058
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 1.75 17.8459
vertex -11.8177 1.75 18.8838
vertex -12 1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5719 1.75 19.9667
vertex -12 1.75 19.9667
vertex -11.5911 1.75 19.9058
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 1.75 17.8459
vertex -12 1.75 19.9667
vertex -12 1.75 16.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.999048 9.68553e-018 0.0436197
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 16.8
vertex -11.9543 -1.75 17.8459
vertex -12 1.75 16.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.999048 9.68553e-018 0.0436197
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 16.8
vertex -11.9543 -1.75 17.8459
vertex -11.9543 1.75 17.8459
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.999048 -9.68553e-018 -0.0436197
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 16.8
vertex -12 1.75 16.8
vertex -11.9543 -1.75 15.7541
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.999048 -9.68553e-018 -0.0436197
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 -1.75 15.7541
vertex -12 1.75 16.8
vertex -11.9543 1.75 15.7541
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.4681 1.75 8.76993
vertex -10.7246 1.75 7.80097
vertex -9.89949 1.75 6.9005
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.03007 1.75 5.33187
vertex -11.4681 1.75 8.76993
vertex -8.99903 1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.99903 1.75 6.07538
vertex -11.4681 1.75 8.76993
vertex -9.89949 1.75 6.9005
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -7 1.75 4.67564
vertex -11.4681 1.75 8.76993
vertex -8.03007 1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -5.91666 1.75 4.11169
vertex -11.4681 1.75 8.76993
vertex -7 1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -4.78828 1.75 3.6443
vertex -11.4681 1.75 8.76993
vertex -5.91666 1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -3.62347 1.75 3.27704
vertex -11.4681 1.75 8.76993
vertex -4.78828 1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -2.43107 1.75 3.01269
vertex -11.4681 1.75 8.76993
vertex -3.62347 1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -1.22018 1.75 2.85327
vertex -11.4681 1.75 8.76993
vertex -2.43107 1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 0 1.75 2.8
vertex -11.4681 1.75 8.76993
vertex -1.22018 1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 1.22018 1.75 2.85327
vertex -11.4681 1.75 8.76993
vertex 0 1.75 2.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -5.07142 1.75 5.92431
vertex -11.4681 1.75 8.76993
vertex 1.22018 1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -5.07142 1.75 5.92431
vertex -6 1.75 6.40769
vertex -11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -2.08378 1.75 4.98231
vertex -3.10583 1.75 5.20889
vertex 2.43107 1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 0 1.75 4.8
vertex -1.04587 1.75 4.84566
vertex 3.62347 1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 1.04587 1.75 4.84566
vertex 0 1.75 4.8
vertex 4.78828 1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 3.10583 1.75 5.20889
vertex 2.08378 1.75 4.98231
vertex 5.91666 1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 4.10424 1.75 5.52369
vertex 3.10583 1.75 5.20889
vertex 7 1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 5.07142 1.75 5.92431
vertex 4.10424 1.75 5.52369
vertex 8.03007 1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 6.88292 1.75 6.97018
vertex 6 1.75 6.40769
vertex 8.99903 1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 7.71345 1.75 7.60747
vertex 6.88292 1.75 6.97018
vertex 9.89949 1.75 6.9005
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.48528 1.75 8.31472
vertex 7.71345 1.75 7.60747
vertex 10.7246 1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.19253 1.75 9.08655
vertex 8.48528 1.75 8.31472
vertex 11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 16.8
vertex 11.9543 1.75 15.7541
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.9543 1.75 15.7541
vertex 11.8177 1.75 14.7162
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.8177 1.75 14.7162
vertex 11.5911 1.75 13.6942
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 1.75 13.6942
vertex 11.2763 1.75 12.6958
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.2763 1.75 12.6958
vertex 10.8757 1.75 11.7286
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.8757 1.75 11.7286
vertex 10.3923 1.75 10.8
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.3923 1.75 10.8
vertex 9.82982 1.75 9.91708
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 9.6048
vertex 9.19253 1.75 9.08655
vertex 11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.4681 1.75 8.76993
vertex 8.48528 1.75 8.31472
vertex 10.7246 1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.19253 1.75 9.08655
vertex -9.82982 1.75 9.91708
vertex -11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.7246 1.75 7.80097
vertex 7.71345 1.75 7.60747
vertex 9.89949 1.75 6.9005
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.89949 1.75 6.9005
vertex 6.88292 1.75 6.97018
vertex 8.99903 1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.99903 1.75 6.07538
vertex 6 1.75 6.40769
vertex 8.03007 1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 6 1.75 6.40769
vertex 5.07142 1.75 5.92431
vertex 8.03007 1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.03007 1.75 5.33187
vertex 4.10424 1.75 5.52369
vertex 7 1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 7 1.75 4.67564
vertex 3.10583 1.75 5.20889
vertex 5.91666 1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 5.91666 1.75 4.11169
vertex 2.08378 1.75 4.98231
vertex 4.78828 1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 2.08378 1.75 4.98231
vertex 1.04587 1.75 4.84566
vertex 4.78828 1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 4.78828 1.75 3.6443
vertex 0 1.75 4.8
vertex 3.62347 1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 3.62347 1.75 3.27704
vertex -1.04587 1.75 4.84566
vertex 2.43107 1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -1.04587 1.75 4.84566
vertex -2.08378 1.75 4.98231
vertex 2.43107 1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 2.43107 1.75 3.01269
vertex -3.10583 1.75 5.20889
vertex 1.22018 1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -3.10583 1.75 5.20889
vertex -4.10424 1.75 5.52369
vertex 1.22018 1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -4.10424 1.75 5.52369
vertex -5.07142 1.75 5.92431
vertex 1.22018 1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.3923 1.75 10.8
vertex -11.4681 1.75 8.76993
vertex -9.82982 1.75 9.91708
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.8757 1.75 11.7286
vertex -11.4681 1.75 8.76993
vertex -10.3923 1.75 10.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.2763 1.75 12.6958
vertex -11.4681 1.75 8.76993
vertex -10.8757 1.75 11.7286
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5911 1.75 13.6942
vertex -11.4681 1.75 8.76993
vertex -11.2763 1.75 12.6958
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.8177 1.75 14.7162
vertex -11.4681 1.75 8.76993
vertex -11.5911 1.75 13.6942
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 1.75 15.7541
vertex -11.4681 1.75 8.76993
vertex -11.8177 1.75 14.7162
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 9.6048
vertex -11.4681 1.75 8.76993
vertex -11.9543 1.75 15.7541
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 1.75 9.6048
vertex -11.9543 1.75 15.7541
vertex -12 1.75 16.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.82982 1.75 9.91708
vertex 9.19253 1.75 9.08655
vertex 12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -6 1.75 6.40769
vertex -6.88292 1.75 6.97018
vertex -11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -6.88292 1.75 6.97018
vertex -7.71345 1.75 7.60747
vertex -11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -7.71345 1.75 7.60747
vertex -8.48528 1.75 8.31472
vertex -11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.48528 1.75 8.31472
vertex -9.19253 1.75 9.08655
vertex -11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.843391 1.19304e-016 0.5373
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.4681 -1.75 8.76993
vertex -11.4681 1.75 8.76993
vertex -12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.843391 1.19304e-016 0.5373
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 9.6048
vertex -11.4681 -1.75 8.76993
vertex -12 1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.4681 -1.75 8.76993
vertex -11.8177 -1.75 14.7162
vertex -10.7246 -1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.7246 -1.75 7.80097
vertex -11.5911 -1.75 13.6942
vertex -9.89949 -1.75 6.90051
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.89949 -1.75 6.90051
vertex -11.2763 -1.75 12.6958
vertex -8.99903 -1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.99903 -1.75 6.07538
vertex -10.8757 -1.75 11.7286
vertex -8.03007 -1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.03007 -1.75 5.33187
vertex -10.3923 -1.75 10.8
vertex -7 -1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -7 -1.75 4.67564
vertex -9.82982 -1.75 9.91708
vertex -5.91666 -1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -5.91666 -1.75 4.11169
vertex -9.19253 -1.75 9.08655
vertex -4.78828 -1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -4.78828 -1.75 3.6443
vertex -8.48528 -1.75 8.31472
vertex -3.62347 -1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -3.62347 -1.75 3.27704
vertex -7.71345 -1.75 7.60747
vertex -2.43107 -1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -2.43107 -1.75 3.01269
vertex -6.88292 -1.75 6.97018
vertex -1.22018 -1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -1.22018 -1.75 2.85327
vertex -6 -1.75 6.4077
vertex 0 -1.75 2.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 0 -1.75 2.8
vertex -5.07142 -1.75 5.92431
vertex 1.22018 -1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 1.22018 -1.75 2.85327
vertex -4.10424 -1.75 5.52369
vertex 2.43107 -1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 2.43107 -1.75 3.01269
vertex -3.10583 -1.75 5.20889
vertex 3.62347 -1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 3.62347 -1.75 3.27704
vertex -2.08378 -1.75 4.98231
vertex 4.78828 -1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 4.78828 -1.75 3.6443
vertex -1.04587 -1.75 4.84566
vertex 5.91666 -1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 5.91666 -1.75 4.11169
vertex 0 -1.75 4.8
vertex 7 -1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 7 -1.75 4.67564
vertex 1.04587 -1.75 4.84566
vertex 8.03007 -1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.03007 -1.75 5.33187
vertex 2.08378 -1.75 4.98231
vertex 8.99903 -1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.99903 -1.75 6.07538
vertex 3.10583 -1.75 5.20889
vertex 9.89949 -1.75 6.90051
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.89949 -1.75 6.90051
vertex 4.10424 -1.75 5.52369
vertex 10.7246 -1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.7246 -1.75 7.80097
vertex 5.07142 -1.75 5.92431
vertex 11.4681 -1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.4681 -1.75 8.76993
vertex 6 -1.75 6.4077
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 6 -1.75 6.4077
vertex 6.88292 -1.75 6.97018
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 6.88292 -1.75 6.97018
vertex 7.71345 -1.75 7.60747
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 7.71345 -1.75 7.60747
vertex 8.48528 -1.75 8.31472
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.48528 -1.75 8.31472
vertex 9.19253 -1.75 9.08655
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.19253 -1.75 9.08655
vertex 9.82982 -1.75 9.91708
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.82982 -1.75 9.91708
vertex 10.3923 -1.75 10.8
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.3923 -1.75 10.8
vertex 10.8757 -1.75 11.7286
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.8757 -1.75 11.7286
vertex 11.2763 -1.75 12.6958
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.2763 -1.75 12.6958
vertex 11.5911 -1.75 13.6942
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 9.6048
vertex 11.8177 -1.75 14.7162
vertex 11.9543 -1.75 15.7541
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 9.6048
vertex 11.9543 -1.75 15.7541
vertex 12 -1.75 16.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 -1.75 13.6942
vertex 11.8177 -1.75 14.7162
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 5.07142 -1.75 5.92431
vertex 6 -1.75 6.4077
vertex 11.4681 -1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 4.10424 -1.75 5.52369
vertex 5.07142 -1.75 5.92431
vertex 10.7246 -1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 3.10583 -1.75 5.20889
vertex 4.10424 -1.75 5.52369
vertex 9.89949 -1.75 6.90051
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 2.08378 -1.75 4.98231
vertex 3.10583 -1.75 5.20889
vertex 8.99903 -1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 1.04587 -1.75 4.84566
vertex 2.08378 -1.75 4.98231
vertex 8.03007 -1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 0 -1.75 4.8
vertex 1.04587 -1.75 4.84566
vertex 7 -1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -1.04587 -1.75 4.84566
vertex 0 -1.75 4.8
vertex 5.91666 -1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -2.08378 -1.75 4.98231
vertex -1.04587 -1.75 4.84566
vertex 4.78828 -1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -3.10583 -1.75 5.20889
vertex -2.08378 -1.75 4.98231
vertex 3.62347 -1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -4.10424 -1.75 5.52369
vertex -3.10583 -1.75 5.20889
vertex 2.43107 -1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -5.07142 -1.75 5.92431
vertex -4.10424 -1.75 5.52369
vertex 1.22018 -1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -6 -1.75 6.4077
vertex -5.07142 -1.75 5.92431
vertex 0 -1.75 2.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -6.88292 -1.75 6.97018
vertex -6 -1.75 6.4077
vertex -1.22018 -1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -7.71345 -1.75 7.60747
vertex -6.88292 -1.75 6.97018
vertex -2.43107 -1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.48528 -1.75 8.31472
vertex -7.71345 -1.75 7.60747
vertex -3.62347 -1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.19253 -1.75 9.08655
vertex -8.48528 -1.75 8.31472
vertex -4.78828 -1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.82982 -1.75 9.91708
vertex -9.19253 -1.75 9.08655
vertex -5.91666 -1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.3923 -1.75 10.8
vertex -9.82982 -1.75 9.91708
vertex -7 -1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.8757 -1.75 11.7286
vertex -10.3923 -1.75 10.8
vertex -8.03007 -1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.2763 -1.75 12.6958
vertex -10.8757 -1.75 11.7286
vertex -8.99903 -1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5911 -1.75 13.6942
vertex -11.2763 -1.75 12.6958
vertex -9.89949 -1.75 6.90051
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.8177 -1.75 14.7162
vertex -11.5911 -1.75 13.6942
vertex -10.7246 -1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 -1.75 15.7541
vertex -11.8177 -1.75 14.7162
vertex -11.4681 -1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 -1.75 15.7541
vertex -11.4681 -1.75 8.76993
vertex -12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 -1.75 15.7541
vertex -12 -1.75 9.6048
vertex -12 -1.75 16.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5719 -1.75 19.9667
vertex -11.5911 -1.75 19.9058
vertex -12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -12 -1.75 19.9667
vertex -11.5911 -1.75 19.9058
vertex -11.8177 -1.75 18.8838
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.8177 -1.75 18.8838
vertex -11.9543 -1.75 17.8459
vertex -12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 -1.75 17.8459
vertex -12 -1.75 16.8
vertex -12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -13.4 -17.5 15.6
vertex -13.4 -17.5 8.88178e-016
vertex -12 -17.5 8.88178e-016
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 6.3
vertex -13.4 -17.5 15.6
vertex -12 -17.5 3.33333e-007
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 3.33333e-007
vertex -13.4 -17.5 15.6
vertex -12 -17.5 8.88178e-016
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 19.49 -17.5 0
vertex 11.99 -17.5 3.33333e-007
vertex 11.99 -17.5 0
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 19.49 -17.5 4
vertex 12 -17.5 4
vertex 19.49 -17.5 0
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 19.9667
vertex -9.17629 -17.5 19.2588
vertex -8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 11.99 -17.5 3.33333e-007
vertex -12 -17.5 6.3
vertex -12 -17.5 3.33333e-007
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 9.8
vertex -13.4 -17.5 15.6
vertex -12 -17.5 6.3
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -6.40923 -17.5 9.8
vertex -13.4 -17.5 15.6
vertex -12 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -6.71751 -17.5 10.0825
vertex -13.4 -17.5 15.6
vertex -6.40923 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -8.92708 -17.5 13.5508
vertex -9.17629 -17.5 14.3412
vertex -13.4 -17.5 15.6
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -7.27742 -17.5 10.6935
vertex -13.4 -17.5 15.6
vertex -6.71751 -17.5 10.0825
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 19.9667
vertex -9.46385 -17.5 17.628
vertex -9.35567 -17.5 18.4497
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -7.78194 -17.5 11.351
vertex -13.4 -17.5 15.6
vertex -7.27742 -17.5 10.6935
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 19.9667
vertex -9.5 -17.5 16.8
vertex -9.46385 -17.5 17.628
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -8.22724 -17.5 12.05
vertex -13.4 -17.5 15.6
vertex -7.78194 -17.5 11.351
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 19.9667
vertex -9.46385 -17.5 15.972
vertex -9.5 -17.5 16.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 19.9667
vertex -12 -17.5 15.6
vertex -9.46385 -17.5 15.972
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -9.35567 -17.5 15.1503
vertex -13.4 -17.5 15.6
vertex -9.17629 -17.5 14.3412
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 15.6
vertex -13.4 -17.5 15.6
vertex -9.35567 -17.5 15.1503
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -9.46385 -17.5 15.972
vertex -12 -17.5 15.6
vertex -9.35567 -17.5 15.1503
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -8.22724 -17.5 12.05
vertex -8.60992 -17.5 12.7851
vertex -13.4 -17.5 15.6
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -8.60992 -17.5 12.7851
vertex -8.92708 -17.5 13.5508
vertex -13.4 -17.5 15.6
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 19.9667
vertex -9.35567 -17.5 18.4497
vertex -9.17629 -17.5 19.2588
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 12 -17.5 4
vertex 11.99 -17.5 3.33333e-007
vertex 19.49 -17.5 0
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 12 -17.5 6.3
vertex 11.99 -17.5 3.33333e-007
vertex 12 -17.5 4
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 12 -17.5 6.3
vertex -12 -17.5 6.3
vertex 11.99 -17.5 3.33333e-007
endloop
endfacet
facet normal 1 0 0
outer loop
vertex -12 -17.5 3.33333e-007
vertex -12 -17.5 8.88178e-016
vertex -12 -14.5 8.88178e-016
endloop
endfacet
facet normal 1 0 0
outer loop
vertex -12 -14.5 3.33333e-007
vertex -12 -17.5 3.33333e-007
vertex -12 -14.5 8.88178e-016
endloop
endfacet
facet normal -1 0 0
outer loop
vertex 11.99 -17.5 0
vertex 11.99 -17.5 3.33333e-007
vertex 11.99 -6.5 0
endloop
endfacet
facet normal -1 0 0
outer loop
vertex 11.99 -6.5 0
vertex 11.99 -17.5 3.33333e-007
vertex 11.99 -6.5 3.33333e-007
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 11.99 -6.5 0
vertex 11.99 -6.5 3.33333e-007
vertex 19.49 -6.5 0
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 19.49 -6.5 0
vertex 11.99 -6.5 3.33333e-007
vertex 12 -6.5 3.33333e-007
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 19.49 -6.5 0
vertex 12 -6.5 3.33333e-007
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 19.49 -6.5 0
vertex 12 -6.5 4
vertex 19.49 -6.5 4
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -12 -17.5 9.8
vertex -12 -17.5 6.3
vertex 12 -17.5 6.3
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 12 -17.5 9.8
vertex -12 -17.5 9.8
vertex 12 -17.5 6.3
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -6.40923 -17.5 9.8
vertex -12 -17.5 9.8
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 6.40923 -17.5 9.8
vertex -6.40923 -17.5 9.8
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 6.40923 -14.7 9.8
vertex -6.40923 -17.5 9.8
vertex 6.40923 -17.5 9.8
endloop
endfacet
facet normal 0 0 1
outer loop
vertex -6.40923 -14.7 9.8
vertex -6.40923 -17.5 9.8
vertex 6.40923 -14.7 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 6.71751 -17.5 10.0825
vertex 6.40923 -17.5 9.8
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 7.27742 -17.5 10.6935
vertex 6.71751 -17.5 10.0825
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 9.17629 -17.5 19.2588
vertex 12 -17.5 19.9667
vertex 8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 9.35567 -17.5 18.4497
vertex 12 -17.5 19.9667
vertex 9.17629 -17.5 19.2588
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 9.46385 -17.5 17.628
vertex 12 -17.5 19.9667
vertex 9.35567 -17.5 18.4497
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 9.5 -17.5 16.8
vertex 12 -17.5 19.9667
vertex 9.46385 -17.5 17.628
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 9.46385 -17.5 15.972
vertex 12 -17.5 19.9667
vertex 9.5 -17.5 16.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 9.35567 -17.5 15.1503
vertex 9.17629 -17.5 14.3412
vertex 12 -17.5 19.9667
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 12 -17.5 19.9667
vertex 9.17629 -17.5 14.3412
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 9.17629 -17.5 14.3412
vertex 8.92708 -17.5 13.5508
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 8.92708 -17.5 13.5508
vertex 8.60992 -17.5 12.7851
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 8.60992 -17.5 12.7851
vertex 8.22724 -17.5 12.05
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 8.22724 -17.5 12.05
vertex 7.78194 -17.5 11.351
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 7.78194 -17.5 11.351
vertex 7.27742 -17.5 10.6935
vertex 12 -17.5 9.8
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 9.46385 -17.5 15.972
vertex 9.35567 -17.5 15.1503
vertex 12 -17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 12 17.5 19.9667
vertex 8.9531 17.5 19.9667
vertex 8.9531 8.75 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 9.47687 -8.75 19.9667
vertex 12 17.5 19.9667
vertex 9.47687 8.75 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 9.47687 8.75 19.9667
vertex 12 17.5 19.9667
vertex 8.9531 8.75 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 8.9531 -17.5 19.9667
vertex 12 17.5 19.9667
vertex 9.47687 -8.75 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 8.9531 -17.5 19.9667
vertex 9.47687 -8.75 19.9667
vertex 8.9531 -8.75 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5719 1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex 12 17.5 19.9667
vertex 8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 12 -17.5 19.9667
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex 8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 19.9667
vertex 11.5719 -1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex 8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5719 -1.75 19.9667
vertex 11.5719 1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex 8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0 0 1
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5719 1.75 19.9667
vertex 12 1.75 19.9667
2012-03-12 02:54:18 +00:00
vertex 12 17.5 19.9667
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 16.8
vertex 11.9543 -1.75 17.8459
vertex 12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 19.9667
vertex 11.9543 -1.75 17.8459
vertex 11.8177 -1.75 18.8838
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.8177 -1.75 18.8838
vertex 11.5911 -1.75 19.9058
vertex 12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 -1.75 19.9058
vertex 11.5719 -1.75 19.9667
vertex 12 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.999048 9.68553e-018 0.0436197
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.9543 1.75 17.8459
vertex 11.9543 -1.75 17.8459
vertex 12 -1.75 16.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.999048 9.68553e-018 0.0436197
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 16.8
vertex 11.9543 1.75 17.8459
vertex 12 -1.75 16.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.999048 -9.68553e-018 -0.0436197
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 16.8
vertex 11.9543 -1.75 15.7541
vertex 11.9543 1.75 15.7541
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.999048 -9.68553e-018 -0.0436197
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 16.8
vertex 12 -1.75 16.8
vertex 11.9543 1.75 15.7541
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.843391 1.19304e-016 0.5373
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 9.6048
vertex 11.4681 1.75 8.76993
vertex 12 -1.75 9.6048
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.843391 1.19304e-016 0.5373
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 -1.75 9.6048
vertex 11.4681 1.75 8.76993
vertex 11.4681 -1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 19.9667
vertex 11.8177 1.75 18.8838
vertex 11.9543 1.75 17.8459
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 1.75 19.9058
vertex 11.8177 1.75 18.8838
vertex 12 1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 12 1.75 16.8
vertex 12 1.75 19.9667
vertex 11.9543 1.75 17.8459
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 1.75 19.9058
vertex 12 1.75 19.9667
vertex 11.5719 1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 6.40923 17.5 9.8
vertex 6.71751 17.5 10.0825
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 12 17.5 9.8
vertex 6.71751 17.5 10.0825
vertex 7.27742 17.5 10.6935
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 7.27742 17.5 10.6935
vertex 7.78194 17.5 11.351
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 7.78194 17.5 11.351
vertex 8.22724 17.5 12.05
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 8.22724 17.5 12.05
vertex 8.60992 17.5 12.7851
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 8.60992 17.5 12.7851
vertex 8.92708 17.5 13.5508
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 8.92708 17.5 13.5508
vertex 9.17629 17.5 14.3412
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 9.17629 17.5 14.3412
vertex 9.35567 17.5 15.1503
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 9.35567 17.5 15.1503
vertex 9.46385 17.5 15.972
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 9.46385 17.5 15.972
vertex 9.5 17.5 16.8
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 9.5 17.5 16.8
vertex 9.46385 17.5 17.628
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 9.46385 17.5 17.628
vertex 9.35567 17.5 18.4497
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 9.35567 17.5 18.4497
vertex 9.17629 17.5 19.2588
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 9.17629 17.5 19.2588
vertex 8.9531 17.5 19.9667
vertex 12 17.5 19.9667
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 9.17629 17.5 19.2588
vertex 12 17.5 19.9667
vertex 12 17.5 9.8
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 16.535 -13.982 4
vertex 12 -17.5 4
vertex 19.49 -17.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 15.508 -11.045 4
vertex 15.77 -10.628 4
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 17.49 -14.2 4
vertex 17 -14.145 4
vertex 19.49 -17.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.98 -14.145 4
vertex 22.096 -16.843 4
vertex 22.52 -16.59 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 20.445 -13.982 4
vertex 22.52 -16.59 4
vertex 22.919 -16.3 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.21 -13.372 4
vertex 20.862 -13.72 4
vertex 23.632 -15.619 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.472 -12.955 4
vertex 21.21 -13.372 4
vertex 23.94 -15.233 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.49 -14.2 4
vertex 17.49 -14.2 4
vertex 20.228 -17.45 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.49 -14.2 4
vertex 20.714 -17.362 4
vertex 21.19 -17.231 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.49 -9.8 4
vertex 19.98 -9.855 4
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.902 -11.018 4
vertex 12 -6.5 4
vertex 24.968 -11.507 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.792 -10.537 4
vertex 12 -6.5 4
vertex 24.902 -11.018 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.639 -10.067 4
vertex 12 -6.5 4
vertex 24.792 -10.537 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.445 -9.614 4
vertex 12 -6.5 4
vertex 24.639 -10.067 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.211 -9.179 4
vertex 12 -6.5 4
vertex 24.445 -9.614 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 23.94 -8.767 4
vertex 12 -6.5 4
vertex 24.211 -9.179 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 23.632 -8.381 4
vertex 12 -6.5 4
vertex 23.94 -8.767 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 23.291 -8.025 4
vertex 12 -6.5 4
vertex 23.632 -8.381 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 22.919 -7.7 4
vertex 12 -6.5 4
vertex 23.291 -8.025 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 22.52 -7.41 4
vertex 12 -6.5 4
vertex 22.919 -7.7 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 22.096 -7.157 4
vertex 12 -6.5 4
vertex 22.52 -7.41 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.652 -6.943 4
vertex 12 -6.5 4
vertex 22.096 -7.157 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.19 -6.769 4
vertex 12 -6.5 4
vertex 21.652 -6.943 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 20.714 -6.638 4
vertex 12 -6.5 4
vertex 21.19 -6.769 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 20.228 -6.55 4
vertex 12 -6.5 4
vertex 20.714 -6.638 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.49 -6.506 4
vertex 12 -6.5 4
vertex 20.228 -6.55 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.737 -6.506 4
vertex 19.49 -6.506 4
vertex 20.228 -6.55 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 17.49 -14.2 4
vertex 19.49 -17.494 4
vertex 19.737 -17.494 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 12 -6.5 4
vertex 12 -17.5 4
vertex 15.345 -12.49 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 12 -6.5 4
vertex 15.345 -12.49 4
vertex 15.29 -12 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 15.77 -10.628 4
vertex 16.118 -10.28 4
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 12 -6.5 4
vertex 15.29 -12 4
vertex 15.345 -11.51 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 16.118 -10.28 4
vertex 16.535 -10.018 4
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.98 -14.145 4
vertex 19.49 -14.2 4
vertex 22.096 -16.843 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 20.862 -13.72 4
vertex 20.445 -13.982 4
vertex 23.291 -15.975 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.635 -11.51 4
vertex 21.69 -12 4
vertex 24.792 -13.463 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.472 -11.045 4
vertex 21.635 -11.51 4
vertex 24.902 -12.982 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.49 -14.2 4
vertex 21.19 -17.231 4
vertex 21.652 -17.057 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.69 -12 4
vertex 21.635 -12.49 4
vertex 24.639 -13.933 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.635 -12.49 4
vertex 24.211 -14.821 4
vertex 24.445 -14.386 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 20.862 -10.28 4
vertex 21.21 -10.628 4
vertex 24.99 -12 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.968 -11.507 4
vertex 12 -6.5 4
vertex 19.98 -9.855 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.968 -11.507 4
vertex 20.445 -10.018 4
vertex 24.99 -12 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.968 -11.507 4
vertex 19.98 -9.855 4
vertex 20.445 -10.018 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.21 -10.628 4
vertex 21.472 -11.045 4
vertex 24.968 -12.493 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 20.445 -10.018 4
vertex 20.862 -10.28 4
vertex 24.99 -12 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.99 -12 4
vertex 21.21 -10.628 4
vertex 24.968 -12.493 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.968 -12.493 4
vertex 21.472 -11.045 4
vertex 24.902 -12.982 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.902 -12.982 4
vertex 21.635 -11.51 4
vertex 24.792 -13.463 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 21.635 -12.49 4
vertex 21.472 -12.955 4
vertex 24.211 -14.821 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.792 -13.463 4
vertex 21.69 -12 4
vertex 24.639 -13.933 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.49 -14.2 4
vertex 20.228 -17.45 4
vertex 20.714 -17.362 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.639 -13.933 4
vertex 21.635 -12.49 4
vertex 24.445 -14.386 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 24.211 -14.821 4
vertex 21.472 -12.955 4
vertex 23.94 -15.233 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 17 -9.855 4
vertex 17.49 -9.8 4
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 23.94 -15.233 4
vertex 21.21 -13.372 4
vertex 23.632 -15.619 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 23.632 -15.619 4
vertex 20.862 -13.72 4
vertex 23.291 -15.975 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 20.445 -13.982 4
vertex 19.98 -14.145 4
vertex 22.52 -16.59 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 23.291 -15.975 4
vertex 20.445 -13.982 4
vertex 22.919 -16.3 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 16.535 -10.018 4
vertex 17 -9.855 4
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 22.096 -16.843 4
vertex 19.49 -14.2 4
vertex 21.652 -17.057 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 20.228 -17.45 4
vertex 17.49 -14.2 4
vertex 19.737 -17.494 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 17.49 -14.2 4
vertex 19.49 -17.5 4
vertex 19.49 -17.494 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 16.118 -13.72 4
vertex 12 -17.5 4
vertex 16.535 -13.982 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 15.77 -13.372 4
vertex 12 -17.5 4
vertex 16.118 -13.72 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 15.508 -12.955 4
vertex 12 -17.5 4
vertex 15.77 -13.372 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 15.345 -12.49 4
vertex 12 -17.5 4
vertex 15.508 -12.955 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 19.49 -6.506 4
vertex 19.49 -6.5 4
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 17 -14.145 4
vertex 16.535 -13.982 4
vertex 19.49 -17.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 15.345 -11.51 4
vertex 15.508 -11.045 4
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 0 1
outer loop
vertex 17.49 -9.8 4
vertex 19.49 -9.8 4
vertex 12 -6.5 4
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -13.4 -17.5 8.88178e-016
vertex -13.4 -14.5 8.88178e-016
vertex -12 -17.5 8.88178e-016
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex -12 -17.5 8.88178e-016
vertex -13.4 -14.5 8.88178e-016
vertex -12 -14.5 8.88178e-016
endloop
endfacet
facet normal -1 0 0
outer loop
vertex -13.4 -17.5 8.88178e-016
vertex -13.4 -17.5 15.6
vertex -13.4 -14.5 8.88178e-016
endloop
endfacet
facet normal -1 0 0
outer loop
vertex -13.4 -14.5 8.88178e-016
vertex -13.4 -17.5 15.6
vertex -13.4 -14.5 15.6
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
vertex 6.71751 8.75 10.0825
vertex 6.71751 17.5 10.0825
vertex 6.40923 17.5 9.8
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
vertex 6.10648 14.7 9.52258
vertex 6.71751 8.75 10.0825
vertex 6.40923 14.7 9.8
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
vertex 6.40923 14.7 9.8
vertex 6.71751 8.75 10.0825
vertex 6.40923 17.5 9.8
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
vertex 6.10648 8.75 9.52258
vertex 6.71751 8.75 10.0825
vertex 6.10648 14.7 9.52258
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 6.40923 14.7 9.8
vertex -6.40923 14.7 9.8
vertex -6.10648 14.7 9.52258
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -4.75 14.7 8.57276
vertex 6.40923 14.7 9.8
vertex -5.44898 14.7 9.01806
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -5.44898 14.7 9.01806
vertex 6.40923 14.7 9.8
vertex -6.10648 14.7 9.52258
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -4.01487 14.7 8.19008
vertex 6.40923 14.7 9.8
vertex -4.75 14.7 8.57276
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -3.24919 14.7 7.87292
vertex 6.40923 14.7 9.8
vertex -4.01487 14.7 8.19008
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -2.45878 14.7 7.6237
vertex 6.40923 14.7 9.8
vertex -3.24919 14.7 7.87292
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -1.64966 14.7 7.44433
vertex 6.40923 14.7 9.8
vertex -2.45878 14.7 7.6237
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex -0.82798 14.7 7.33615
vertex 6.40923 14.7 9.8
vertex -1.64966 14.7 7.44433
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 0 14.7 7.3
vertex 6.40923 14.7 9.8
vertex -0.82798 14.7 7.33615
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 0.82798 14.7 7.33615
vertex 6.40923 14.7 9.8
vertex 0 14.7 7.3
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 1.64966 14.7 7.44433
vertex 6.40923 14.7 9.8
vertex 0.82798 14.7 7.33615
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 2.45878 14.7 7.6237
vertex 6.40923 14.7 9.8
vertex 1.64966 14.7 7.44433
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 3.24919 14.7 7.87292
vertex 6.40923 14.7 9.8
vertex 2.45878 14.7 7.6237
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 4.01487 14.7 8.19008
vertex 6.40923 14.7 9.8
vertex 3.24919 14.7 7.87292
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 4.75 14.7 8.57276
vertex 6.40923 14.7 9.8
vertex 4.01487 14.7 8.19008
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 5.44898 14.7 9.01806
vertex 6.40923 14.7 9.8
vertex 4.75 14.7 8.57276
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 6.10648 14.7 9.52258
vertex 6.40923 14.7 9.8
vertex 5.44898 14.7 9.01806
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
vertex -6.10648 8.75 9.52258
vertex -6.10648 14.7 9.52258
vertex -6.40923 14.7 9.8
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
vertex -6.71751 17.5 10.0825
vertex -6.10648 8.75 9.52258
vertex -6.40923 14.7 9.8
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
vertex -6.40923 17.5 9.8
vertex -6.71751 17.5 10.0825
vertex -6.40923 14.7 9.8
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
vertex -6.71751 17.5 10.0825
vertex -6.71751 8.75 10.0825
vertex -6.10648 8.75 9.52258
endloop
endfacet
facet normal 0.737277 1.50011e-016 0.67559
outer loop
vertex -6.71751 8.75 10.0825
vertex -6.71751 17.5 10.0825
vertex -7.27742 17.5 10.6935
endloop
endfacet
facet normal 0.737277 1.50011e-016 0.67559
outer loop
vertex -7.27742 8.75 10.6935
vertex -6.71751 8.75 10.0825
vertex -7.27742 17.5 10.6935
endloop
endfacet
facet normal 0.793353 1.35172e-016 0.608761
outer loop
vertex -7.27742 8.75 10.6935
vertex -7.27742 17.5 10.6935
vertex -7.78194 17.5 11.351
endloop
endfacet
facet normal 0.793353 1.35172e-016 0.608761
outer loop
vertex -7.78194 8.75 11.351
vertex -7.27742 8.75 10.6935
vertex -7.78194 17.5 11.351
endloop
endfacet
facet normal 0.843391 1.19305e-016 0.5373
outer loop
vertex -7.78194 8.75 11.351
vertex -7.78194 17.5 11.351
vertex -8.22724 17.5 12.05
endloop
endfacet
facet normal 0.843391 1.19305e-016 0.5373
outer loop
vertex -8.22724 8.75 12.05
vertex -7.78194 8.75 11.351
vertex -8.22724 17.5 12.05
endloop
endfacet
facet normal 0.887011 1.02529e-016 0.461749
outer loop
vertex -8.22724 8.75 12.05
vertex -8.22724 17.5 12.05
vertex -8.60992 17.5 12.7851
endloop
endfacet
facet normal 0.887011 1.02529e-016 0.461749
outer loop
vertex -8.60992 8.75 12.7851
vertex -8.22724 8.75 12.05
vertex -8.60992 17.5 12.7851
endloop
endfacet
facet normal 0.923879 8.49728e-017 0.382684
outer loop
vertex -8.60992 8.75 12.7851
vertex -8.60992 17.5 12.7851
vertex -8.92708 17.5 13.5508
endloop
endfacet
facet normal 0.923879 8.49728e-017 0.382684
outer loop
vertex -8.92708 8.75 13.5508
vertex -8.60992 8.75 12.7851
vertex -8.92708 17.5 13.5508
endloop
endfacet
facet normal 0.953717 6.677e-017 0.300705
outer loop
vertex -8.92708 8.75 13.5508
vertex -8.92708 17.5 13.5508
vertex -9.17629 17.5 14.3412
endloop
endfacet
facet normal 0.953717 6.677e-017 0.300705
outer loop
vertex -9.17629 8.75 14.3412
vertex -8.92708 8.75 13.5508
vertex -9.17629 17.5 14.3412
endloop
endfacet
facet normal 0.976296 4.80594e-017 0.21644
outer loop
vertex -9.17629 8.75 14.3412
vertex -9.17629 17.5 14.3412
vertex -9.35567 17.5 15.1503
endloop
endfacet
facet normal 0.976296 4.80594e-017 0.21644
outer loop
vertex -9.35567 8.75 15.1503
vertex -9.17629 8.75 14.3412
vertex -9.35567 17.5 15.1503
endloop
endfacet
facet normal 0.991445 2.89826e-017 0.130526
outer loop
vertex -9.35567 8.75 15.1503
vertex -9.35567 17.5 15.1503
vertex -9.46385 17.5 15.972
endloop
endfacet
facet normal 0.991445 2.89826e-017 0.130526
outer loop
vertex -9.46385 8.75 15.972
vertex -9.35567 8.75 15.1503
vertex -9.46385 17.5 15.972
endloop
endfacet
facet normal 0.999048 9.68535e-018 0.0436189
outer loop
vertex -9.46385 8.75 15.972
vertex -9.46385 17.5 15.972
vertex -9.5 17.5 16.8
endloop
endfacet
facet normal 0.999048 9.68535e-018 0.0436189
outer loop
vertex -9.5 8.75 16.8
vertex -9.46385 8.75 15.972
vertex -9.5 17.5 16.8
endloop
endfacet
facet normal 0.999048 -9.68535e-018 -0.0436189
outer loop
vertex -9.5 17.5 16.8
vertex -9.46385 17.5 17.628
vertex -9.46385 8.75 17.628
endloop
endfacet
facet normal 0.999048 -9.68535e-018 -0.0436189
outer loop
vertex -9.5 8.75 16.8
vertex -9.5 17.5 16.8
vertex -9.46385 8.75 17.628
endloop
endfacet
facet normal 0.991445 -2.89826e-017 -0.130526
outer loop
vertex -9.46385 17.5 17.628
vertex -9.35567 17.5 18.4497
vertex -9.35567 8.75 18.4497
endloop
endfacet
facet normal 0.991445 -2.89826e-017 -0.130526
outer loop
vertex -9.46385 8.75 17.628
vertex -9.46385 17.5 17.628
vertex -9.35567 8.75 18.4497
endloop
endfacet
facet normal 0.976296 -4.80594e-017 -0.21644
outer loop
vertex -9.35567 17.5 18.4497
vertex -9.17629 17.5 19.2588
vertex -9.17629 8.75 19.2588
endloop
endfacet
facet normal 0.976296 -4.80594e-017 -0.21644
outer loop
vertex -9.35567 8.75 18.4497
vertex -9.35567 17.5 18.4497
vertex -9.17629 8.75 19.2588
endloop
endfacet
facet normal 0.953717 -6.677e-017 -0.300705
outer loop
vertex -9.17629 17.5 19.2588
vertex -8.9531 17.5 19.9667
vertex -8.9531 8.75 19.9667
endloop
endfacet
facet normal 0.953717 -6.677e-017 -0.300705
outer loop
vertex -9.17629 8.75 19.2588
vertex -9.17629 17.5 19.2588
vertex -8.9531 8.75 19.9667
endloop
endfacet
facet normal -0.953717 6.67702e-017 0.300706
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5911 -1.75 19.9058
vertex -11.5719 -1.75 19.9667
vertex -11.5911 1.75 19.9058
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.953717 6.67702e-017 0.300706
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5911 1.75 19.9058
vertex -11.5719 -1.75 19.9667
vertex -11.5719 1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.96195 8.75 15.9284
vertex -9.84808 8.75 15.0635
vertex -9.65926 8.75 14.2118
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.06308 8.75 12.5738
vertex -9.96195 8.75 15.9284
vertex -9.39693 8.75 13.3798
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.39693 8.75 13.3798
vertex -9.96195 8.75 15.9284
vertex -9.65926 8.75 14.2118
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -8.66025 8.75 11.8
vertex -9.96195 8.75 15.9284
vertex -9.06308 8.75 12.5738
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -8.19152 8.75 11.0642
vertex -9.96195 8.75 15.9284
vertex -8.66025 8.75 11.8
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -7.66044 8.75 10.3721
vertex -9.96195 8.75 15.9284
vertex -8.19152 8.75 11.0642
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -8.60992 8.75 12.7851
vertex -9.96195 8.75 15.9284
vertex -7.66044 8.75 10.3721
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -7.78194 8.75 11.351
vertex -8.22724 8.75 12.05
vertex -7.07107 8.75 9.72893
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -6.71751 8.75 10.0825
vertex -7.27742 8.75 10.6935
vertex -6.42788 8.75 9.13956
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -6.10648 8.75 9.52258
vertex -6.71751 8.75 10.0825
vertex -5.73576 8.75 8.60848
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -5.44898 8.75 9.01806
vertex -6.10648 8.75 9.52258
vertex -5 8.75 8.13975
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -4.75 8.75 8.57276
vertex -5.44898 8.75 9.01806
vertex -4.22618 8.75 7.73692
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -4.01487 8.75 8.19008
vertex -4.75 8.75 8.57276
vertex -3.4202 8.75 7.40307
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -2.45878 8.75 7.6237
vertex -3.24919 8.75 7.87292
vertex -2.58819 8.75 7.14074
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -1.64966 8.75 7.44433
vertex -2.45878 8.75 7.6237
vertex -1.73648 8.75 6.95192
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -0.82798 8.75 7.33615
vertex -1.64966 8.75 7.44433
vertex -0.871557 8.75 6.83805
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 0 8.75 7.3
vertex -0.82798 8.75 7.33615
vertex 0 8.75 6.8
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 0.82798 8.75 7.33615
vertex 0 8.75 7.3
vertex 0.871557 8.75 6.83805
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 1.64966 8.75 7.44433
vertex 0.82798 8.75 7.33615
vertex 1.73648 8.75 6.95192
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 2.45878 8.75 7.6237
vertex 1.64966 8.75 7.44433
vertex 2.58819 8.75 7.14074
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 3.24919 8.75 7.87292
vertex 2.45878 8.75 7.6237
vertex 3.4202 8.75 7.40307
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 4.01487 8.75 8.19008
vertex 3.24919 8.75 7.87292
vertex 4.22618 8.75 7.73692
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 4.75 8.75 8.57276
vertex 4.01487 8.75 8.19008
vertex 5 8.75 8.13975
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 5.44898 8.75 9.01806
vertex 4.75 8.75 8.57276
vertex 5.73576 8.75 8.60848
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 6.10648 8.75 9.52258
vertex 5.44898 8.75 9.01806
vertex 6.42788 8.75 9.13956
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 6.71751 8.75 10.0825
vertex 6.10648 8.75 9.52258
vertex 7.07107 8.75 9.72893
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 7.27742 8.75 10.6935
vertex 6.71751 8.75 10.0825
vertex 7.66044 8.75 10.3721
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 7.78194 8.75 11.351
vertex 7.27742 8.75 10.6935
vertex 8.19152 8.75 11.0642
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 8.22724 8.75 12.05
vertex 7.78194 8.75 11.351
vertex 8.66025 8.75 11.8
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 8.60992 8.75 12.7851
vertex 8.22724 8.75 12.05
vertex 9.06308 8.75 12.5738
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 8.92708 8.75 13.5508
vertex 8.60992 8.75 12.7851
vertex 9.39693 8.75 13.3798
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.17629 8.75 14.3412
vertex 8.92708 8.75 13.5508
vertex 9.65926 8.75 14.2118
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.35567 8.75 15.1503
vertex 9.17629 8.75 14.3412
vertex 9.84808 8.75 15.0635
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.46385 8.75 15.972
vertex 9.35567 8.75 15.1503
vertex 9.96195 8.75 15.9284
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -8.92708 8.75 13.5508
vertex -9.17629 8.75 14.3412
vertex -9.96195 8.75 15.9284
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.17629 8.75 19.2588
vertex 9.35567 8.75 18.4497
vertex 9.84808 8.75 18.5365
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.46385 8.75 17.628
vertex 9.5 8.75 16.8
vertex 9.96195 8.75 17.6716
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.65926 8.75 19.3882
vertex 9.17629 8.75 19.2588
vertex 9.84808 8.75 18.5365
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.84808 8.75 18.5365
vertex 9.35567 8.75 18.4497
vertex 9.96195 8.75 17.6716
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.35567 8.75 18.4497
vertex 9.46385 8.75 17.628
vertex 9.96195 8.75 17.6716
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.96195 8.75 17.6716
vertex 9.5 8.75 16.8
vertex 10 8.75 16.8
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 10 8.75 16.8
vertex 9.46385 8.75 15.972
vertex 9.96195 8.75 15.9284
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.96195 8.75 15.9284
vertex 9.35567 8.75 15.1503
vertex 9.84808 8.75 15.0635
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.84808 8.75 15.0635
vertex 9.17629 8.75 14.3412
vertex 9.65926 8.75 14.2118
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.46385 8.75 15.972
vertex -9.5 8.75 16.8
vertex -9.96195 8.75 15.9284
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.65926 8.75 14.2118
vertex 8.92708 8.75 13.5508
vertex 9.39693 8.75 13.3798
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.39693 8.75 13.3798
vertex 8.60992 8.75 12.7851
vertex 9.06308 8.75 12.5738
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.06308 8.75 12.5738
vertex 8.22724 8.75 12.05
vertex 8.66025 8.75 11.8
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 8.66025 8.75 11.8
vertex 7.78194 8.75 11.351
vertex 8.19152 8.75 11.0642
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 8.19152 8.75 11.0642
vertex 7.27742 8.75 10.6935
vertex 7.66044 8.75 10.3721
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 7.66044 8.75 10.3721
vertex 6.71751 8.75 10.0825
vertex 7.07107 8.75 9.72893
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 7.07107 8.75 9.72893
vertex 6.10648 8.75 9.52258
vertex 6.42788 8.75 9.13956
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 6.42788 8.75 9.13956
vertex 5.44898 8.75 9.01806
vertex 5.73576 8.75 8.60848
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 5.73576 8.75 8.60848
vertex 4.75 8.75 8.57276
vertex 5 8.75 8.13975
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 5 8.75 8.13975
vertex 4.01487 8.75 8.19008
vertex 4.22618 8.75 7.73692
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 4.22618 8.75 7.73692
vertex 3.24919 8.75 7.87292
vertex 3.4202 8.75 7.40307
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 3.4202 8.75 7.40307
vertex 2.45878 8.75 7.6237
vertex 2.58819 8.75 7.14074
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 2.58819 8.75 7.14074
vertex 1.64966 8.75 7.44433
vertex 1.73648 8.75 6.95192
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 1.73648 8.75 6.95192
vertex 0.82798 8.75 7.33615
vertex 0.871557 8.75 6.83805
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 0.871557 8.75 6.83805
vertex 0 8.75 7.3
vertex 0 8.75 6.8
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 0 8.75 6.8
vertex -0.82798 8.75 7.33615
vertex -0.871557 8.75 6.83805
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -0.871557 8.75 6.83805
vertex -1.64966 8.75 7.44433
vertex -1.73648 8.75 6.95192
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -1.73648 8.75 6.95192
vertex -2.45878 8.75 7.6237
vertex -2.58819 8.75 7.14074
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -2.58819 8.75 7.14074
vertex -3.24919 8.75 7.87292
vertex -3.4202 8.75 7.40307
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -3.24919 8.75 7.87292
vertex -4.01487 8.75 8.19008
vertex -3.4202 8.75 7.40307
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -3.4202 8.75 7.40307
vertex -4.75 8.75 8.57276
vertex -4.22618 8.75 7.73692
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -4.22618 8.75 7.73692
vertex -5.44898 8.75 9.01806
vertex -5 8.75 8.13975
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -5 8.75 8.13975
vertex -6.10648 8.75 9.52258
vertex -5.73576 8.75 8.60848
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -5.73576 8.75 8.60848
vertex -6.71751 8.75 10.0825
vertex -6.42788 8.75 9.13956
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -6.42788 8.75 9.13956
vertex -7.27742 8.75 10.6935
vertex -7.07107 8.75 9.72893
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -7.27742 8.75 10.6935
vertex -7.78194 8.75 11.351
vertex -7.07107 8.75 9.72893
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -7.07107 8.75 9.72893
vertex -8.22724 8.75 12.05
vertex -7.66044 8.75 10.3721
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -8.22724 8.75 12.05
vertex -8.60992 8.75 12.7851
vertex -7.66044 8.75 10.3721
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -8.92708 8.75 13.5508
vertex -9.96195 8.75 15.9284
vertex -8.60992 8.75 12.7851
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 9.5 8.75 16.8
vertex 9.46385 8.75 15.972
vertex 10 8.75 16.8
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.46385 8.75 17.628
vertex -9.96195 8.75 15.9284
vertex -9.5 8.75 16.8
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.35567 8.75 18.4497
vertex -9.96195 8.75 15.9284
vertex -9.46385 8.75 17.628
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.17629 8.75 19.2588
vertex -9.96195 8.75 15.9284
vertex -9.35567 8.75 18.4497
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.47687 8.75 19.9667
vertex -9.96195 8.75 15.9284
vertex -9.17629 8.75 19.2588
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.47687 8.75 19.9667
vertex -9.17629 8.75 19.2588
vertex -8.9531 8.75 19.9667
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.65926 8.75 19.3882
vertex -9.96195 8.75 15.9284
vertex -9.47687 8.75 19.9667
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.84808 8.75 18.5365
vertex -9.96195 8.75 15.9284
vertex -9.65926 8.75 19.3882
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.96195 8.75 17.6716
vertex -9.96195 8.75 15.9284
vertex -9.84808 8.75 18.5365
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -10 8.75 16.8
vertex -9.96195 8.75 15.9284
vertex -9.96195 8.75 17.6716
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 8.9531 8.75 19.9667
vertex 9.65926 8.75 19.3882
vertex 9.47687 8.75 19.9667
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex 8.9531 8.75 19.9667
vertex 9.17629 8.75 19.2588
vertex 9.65926 8.75 19.3882
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.17629 8.75 14.3412
vertex -9.35567 8.75 15.1503
vertex -9.96195 8.75 15.9284
endloop
endfacet
facet normal 0 -1 2.22045e-016
outer loop
vertex -9.35567 8.75 15.1503
vertex -9.46385 8.75 15.972
vertex -9.96195 8.75 15.9284
endloop
endfacet
facet normal 0.953717 -6.67701e-017 -0.300706
outer loop
vertex -9.65926 8.75 19.3882
vertex -9.47687 8.75 19.9667
vertex -9.47687 -8.75 19.9667
endloop
endfacet
facet normal 0.953717 -6.67701e-017 -0.300706
outer loop
vertex -9.65926 -8.75 19.3882
vertex -9.65926 8.75 19.3882
vertex -9.47687 -8.75 19.9667
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.84808 -8.75 18.5365
vertex -9.65926 -8.75 19.3882
vertex -9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -9.65926 -8.75 19.3882
vertex -9.47687 -8.75 19.9667
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -9.47687 -8.75 19.9667
vertex -8.9531 -8.75 19.9667
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -8.9531 -8.75 19.9667
vertex -9.17629 -8.75 19.2588
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -9.17629 -8.75 19.2588
vertex -9.35567 -8.75 18.4497
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.35567 -8.75 18.4497
vertex -9.46385 -8.75 17.628
vertex -9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.46385 -8.75 17.628
vertex -9.5 -8.75 16.8
vertex -9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.5 -8.75 16.8
vertex -9.46385 -8.75 15.972
vertex -9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.46385 -8.75 15.972
vertex -9.35567 -8.75 15.1503
vertex -9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.35567 -8.75 15.1503
vertex -9.17629 -8.75 14.3412
vertex -9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.46385 -8.75 17.628
vertex 9.47687 -8.75 19.9667
vertex 9.5 -8.75 16.8
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.35567 -8.75 18.4497
vertex 9.47687 -8.75 19.9667
vertex 9.46385 -8.75 17.628
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.17629 -8.75 19.2588
vertex 8.9531 -8.75 19.9667
vertex 9.47687 -8.75 19.9667
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.17629 -8.75 19.2588
vertex 9.47687 -8.75 19.9667
vertex 9.35567 -8.75 18.4497
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.5 -8.75 16.8
vertex 9.47687 -8.75 19.9667
vertex 9.65926 -8.75 19.3882
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.5 -8.75 16.8
vertex 9.65926 -8.75 19.3882
vertex 9.46385 -8.75 15.972
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.46385 -8.75 15.972
vertex 9.65926 -8.75 19.3882
vertex 9.84808 -8.75 18.5365
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.46385 -8.75 15.972
vertex 9.84808 -8.75 18.5365
vertex 9.35567 -8.75 15.1503
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.35567 -8.75 15.1503
vertex 9.84808 -8.75 18.5365
vertex 9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.35567 -8.75 15.1503
vertex 9.96195 -8.75 17.6716
vertex 9.17629 -8.75 14.3412
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.17629 -8.75 14.3412
vertex 9.96195 -8.75 17.6716
vertex 10 -8.75 16.8
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 9.17629 -8.75 14.3412
vertex 10 -8.75 16.8
vertex 8.92708 -8.75 13.5508
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 8.92708 -8.75 13.5508
vertex 10 -8.75 16.8
vertex 9.96195 -8.75 15.9284
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 8.92708 -8.75 13.5508
vertex 9.96195 -8.75 15.9284
vertex 8.60992 -8.75 12.7851
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 8.60992 -8.75 12.7851
vertex 9.96195 -8.75 15.9284
vertex 9.84808 -8.75 15.0635
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 8.60992 -8.75 12.7851
vertex 9.84808 -8.75 15.0635
vertex 8.22724 -8.75 12.05
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 8.22724 -8.75 12.05
vertex 9.84808 -8.75 15.0635
vertex 9.65926 -8.75 14.2118
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 8.22724 -8.75 12.05
vertex 9.65926 -8.75 14.2118
vertex 7.78194 -8.75 11.351
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 7.78194 -8.75 11.351
vertex 9.65926 -8.75 14.2118
vertex 9.39693 -8.75 13.3798
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 7.78194 -8.75 11.351
vertex 9.39693 -8.75 13.3798
vertex 7.27742 -8.75 10.6935
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 7.27742 -8.75 10.6935
vertex 9.39693 -8.75 13.3798
vertex 9.06308 -8.75 12.5738
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 7.27742 -8.75 10.6935
vertex 9.06308 -8.75 12.5738
vertex 6.71751 -8.75 10.0825
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 6.71751 -8.75 10.0825
vertex 9.06308 -8.75 12.5738
vertex 8.66025 -8.75 11.8
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 6.71751 -8.75 10.0825
vertex 8.66025 -8.75 11.8
vertex 6.10648 -8.75 9.52258
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 6.10648 -8.75 9.52258
vertex 8.66025 -8.75 11.8
vertex 8.19152 -8.75 11.0642
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 6.10648 -8.75 9.52258
vertex 8.19152 -8.75 11.0642
vertex 5.44898 -8.75 9.01806
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 5.44898 -8.75 9.01806
vertex 8.19152 -8.75 11.0642
vertex 7.66044 -8.75 10.3721
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 5.44898 -8.75 9.01806
vertex 7.66044 -8.75 10.3721
vertex 4.75 -8.75 8.57276
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 4.75 -8.75 8.57276
vertex 7.66044 -8.75 10.3721
vertex 7.07107 -8.75 9.72893
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 4.75 -8.75 8.57276
vertex 7.07107 -8.75 9.72893
vertex 4.01487 -8.75 8.19008
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 4.01487 -8.75 8.19008
vertex 7.07107 -8.75 9.72893
vertex 6.42788 -8.75 9.13956
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 4.01487 -8.75 8.19008
vertex 6.42788 -8.75 9.13956
vertex 3.24919 -8.75 7.87292
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 3.24919 -8.75 7.87292
vertex 6.42788 -8.75 9.13956
vertex 5.73576 -8.75 8.60848
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 3.24919 -8.75 7.87292
vertex 5.73576 -8.75 8.60848
vertex 2.45878 -8.75 7.62371
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 2.45878 -8.75 7.62371
vertex 5.73576 -8.75 8.60848
vertex 5 -8.75 8.13975
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 2.45878 -8.75 7.62371
vertex 5 -8.75 8.13975
vertex 1.64966 -8.75 7.44433
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 1.64966 -8.75 7.44433
vertex 5 -8.75 8.13975
vertex 4.22618 -8.75 7.73692
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 1.64966 -8.75 7.44433
vertex 4.22618 -8.75 7.73692
vertex 0.82798 -8.75 7.33615
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 0.82798 -8.75 7.33615
vertex 4.22618 -8.75 7.73692
vertex 3.4202 -8.75 7.40307
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 0.82798 -8.75 7.33615
vertex 3.4202 -8.75 7.40307
vertex 0 -8.75 7.3
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 0 -8.75 7.3
vertex 3.4202 -8.75 7.40307
vertex 2.58819 -8.75 7.14074
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex 0 -8.75 7.3
vertex 2.58819 -8.75 7.14074
vertex -0.82798 -8.75 7.33615
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -0.82798 -8.75 7.33615
vertex 2.58819 -8.75 7.14074
vertex 1.73648 -8.75 6.95192
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -0.82798 -8.75 7.33615
vertex 1.73648 -8.75 6.95192
vertex -1.64966 -8.75 7.44433
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -1.64966 -8.75 7.44433
vertex 1.73648 -8.75 6.95192
vertex 0.871557 -8.75 6.83805
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -1.64966 -8.75 7.44433
vertex 0.871557 -8.75 6.83805
vertex -2.45878 -8.75 7.62371
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -2.45878 -8.75 7.62371
vertex 0.871557 -8.75 6.83805
vertex 0 -8.75 6.8
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -2.45878 -8.75 7.62371
vertex 0 -8.75 6.8
vertex -3.24919 -8.75 7.87292
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -3.24919 -8.75 7.87292
vertex 0 -8.75 6.8
vertex -0.871557 -8.75 6.83805
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -3.24919 -8.75 7.87292
vertex -0.871557 -8.75 6.83805
vertex -4.01487 -8.75 8.19008
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -4.01487 -8.75 8.19008
vertex -0.871557 -8.75 6.83805
vertex -1.73648 -8.75 6.95192
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -4.01487 -8.75 8.19008
vertex -1.73648 -8.75 6.95192
vertex -4.75 -8.75 8.57276
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -4.75 -8.75 8.57276
vertex -1.73648 -8.75 6.95192
vertex -2.58819 -8.75 7.14074
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -4.75 -8.75 8.57276
vertex -2.58819 -8.75 7.14074
vertex -5.44898 -8.75 9.01806
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -5.44898 -8.75 9.01806
vertex -2.58819 -8.75 7.14074
vertex -3.4202 -8.75 7.40307
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -5.44898 -8.75 9.01806
vertex -3.4202 -8.75 7.40307
vertex -6.10648 -8.75 9.52258
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -6.10648 -8.75 9.52258
vertex -3.4202 -8.75 7.40307
vertex -4.22618 -8.75 7.73692
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -6.10648 -8.75 9.52258
vertex -4.22618 -8.75 7.73692
vertex -6.71751 -8.75 10.0825
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -6.71751 -8.75 10.0825
vertex -4.22618 -8.75 7.73692
vertex -5 -8.75 8.13975
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -6.71751 -8.75 10.0825
vertex -5 -8.75 8.13975
vertex -7.27742 -8.75 10.6935
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -7.27742 -8.75 10.6935
vertex -5 -8.75 8.13975
vertex -5.73576 -8.75 8.60848
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -7.27742 -8.75 10.6935
vertex -5.73576 -8.75 8.60848
vertex -7.78194 -8.75 11.351
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -7.78194 -8.75 11.351
vertex -5.73576 -8.75 8.60848
vertex -6.42788 -8.75 9.13956
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -7.78194 -8.75 11.351
vertex -6.42788 -8.75 9.13956
vertex -8.22724 -8.75 12.05
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -8.22724 -8.75 12.05
vertex -6.42788 -8.75 9.13956
vertex -7.07107 -8.75 9.72893
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -8.22724 -8.75 12.05
vertex -7.07107 -8.75 9.72893
vertex -8.60992 -8.75 12.7851
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -8.60992 -8.75 12.7851
vertex -7.07107 -8.75 9.72893
vertex -7.66044 -8.75 10.3721
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -8.60992 -8.75 12.7851
vertex -7.66044 -8.75 10.3721
vertex -8.92708 -8.75 13.5508
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -8.92708 -8.75 13.5508
vertex -7.66044 -8.75 10.3721
vertex -8.19152 -8.75 11.0642
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -8.92708 -8.75 13.5508
vertex -8.19152 -8.75 11.0642
vertex -9.17629 -8.75 14.3412
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.17629 -8.75 14.3412
vertex -8.19152 -8.75 11.0642
vertex -8.66025 -8.75 11.8
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.17629 -8.75 14.3412
vertex -8.66025 -8.75 11.8
vertex -9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -8.66025 -8.75 11.8
vertex -9.06308 -8.75 12.5738
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -9.06308 -8.75 12.5738
vertex -9.39693 -8.75 13.3798
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -9.39693 -8.75 13.3798
vertex -9.65926 -8.75 14.2118
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -9.65926 -8.75 14.2118
vertex -9.84808 -8.75 15.0635
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -9.84808 -8.75 15.0635
vertex -9.96195 -8.75 15.9284
endloop
endfacet
facet normal 0 1 -2.22045e-016
outer loop
vertex -9.96195 -8.75 17.6716
vertex -9.96195 -8.75 15.9284
vertex -10 -8.75 16.8
endloop
endfacet
facet normal 0.953717 -6.677e-017 -0.300705
outer loop
vertex -9.17629 -8.75 19.2588
vertex -8.9531 -8.75 19.9667
vertex -8.9531 -17.5 19.9667
endloop
endfacet
facet normal 0.953717 -6.677e-017 -0.300705
outer loop
vertex -9.17629 -17.5 19.2588
vertex -9.17629 -8.75 19.2588
vertex -8.9531 -17.5 19.9667
endloop
endfacet
facet normal -0.991445 2.89826e-017 0.130526
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 -1.75 17.8459
vertex -11.8177 -1.75 18.8838
vertex -11.9543 1.75 17.8459
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.991445 2.89826e-017 0.130526
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 1.75 17.8459
vertex -11.8177 -1.75 18.8838
vertex -11.8177 1.75 18.8838
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.976296 4.80592e-017 0.216439
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.8177 -1.75 18.8838
vertex -11.5911 -1.75 19.9058
vertex -11.8177 1.75 18.8838
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.976296 4.80592e-017 0.216439
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.8177 1.75 18.8838
vertex -11.5911 -1.75 19.9058
vertex -11.5911 1.75 19.9058
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.991445 -2.89826e-017 -0.130526
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.9543 -1.75 15.7541
vertex -11.9543 1.75 15.7541
vertex -11.8177 -1.75 14.7162
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.991445 -2.89826e-017 -0.130526
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.8177 -1.75 14.7162
vertex -11.9543 1.75 15.7541
vertex -11.8177 1.75 14.7162
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.793353 1.35172e-016 0.608762
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.7246 -1.75 7.80097
vertex -10.7246 1.75 7.80097
vertex -11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.793353 1.35172e-016 0.608762
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.4681 -1.75 8.76993
vertex -10.7246 -1.75 7.80097
vertex -11.4681 1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.976296 -4.80592e-017 -0.216439
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.8177 -1.75 14.7162
vertex -11.8177 1.75 14.7162
vertex -11.5911 -1.75 13.6942
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.976296 -4.80592e-017 -0.216439
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5911 -1.75 13.6942
vertex -11.8177 1.75 14.7162
vertex -11.5911 1.75 13.6942
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.953717 -6.67702e-017 -0.300706
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.5911 -1.75 13.6942
vertex -11.5911 1.75 13.6942
vertex -11.2763 -1.75 12.6958
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.953717 -6.67702e-017 -0.300706
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.2763 -1.75 12.6958
vertex -11.5911 1.75 13.6942
vertex -11.2763 1.75 12.6958
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.923879 -8.49728e-017 -0.382684
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -11.2763 -1.75 12.6958
vertex -11.2763 1.75 12.6958
vertex -10.8757 -1.75 11.7286
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.923879 -8.49728e-017 -0.382684
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.8757 -1.75 11.7286
vertex -11.2763 1.75 12.6958
vertex -10.8757 1.75 11.7286
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.887011 -1.02529e-016 -0.461748
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.8757 -1.75 11.7286
vertex -10.8757 1.75 11.7286
vertex -10.3923 -1.75 10.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.887011 -1.02529e-016 -0.461748
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.3923 -1.75 10.8
vertex -10.8757 1.75 11.7286
vertex -10.3923 1.75 10.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.843392 -1.19304e-016 -0.537299
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.3923 -1.75 10.8
vertex -10.3923 1.75 10.8
vertex -9.82982 -1.75 9.91708
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.843392 -1.19304e-016 -0.537299
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.82982 -1.75 9.91708
vertex -10.3923 1.75 10.8
vertex -9.82982 1.75 9.91708
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.793353 -1.35172e-016 -0.608762
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.82982 -1.75 9.91708
vertex -9.82982 1.75 9.91708
vertex -9.19253 -1.75 9.08655
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.793353 -1.35172e-016 -0.608762
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.19253 -1.75 9.08655
vertex -9.82982 1.75 9.91708
vertex -9.19253 1.75 9.08655
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.737277 -1.50011e-016 -0.67559
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.19253 -1.75 9.08655
vertex -9.19253 1.75 9.08655
vertex -8.48528 -1.75 8.31472
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.737277 -1.50011e-016 -0.67559
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.48528 -1.75 8.31472
vertex -9.19253 1.75 9.08655
vertex -8.48528 1.75 8.31472
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.67559 -1.63708e-016 -0.737277
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.48528 -1.75 8.31472
vertex -8.48528 1.75 8.31472
vertex -7.71345 -1.75 7.60747
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.67559 -1.63708e-016 -0.737277
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -7.71345 -1.75 7.60747
vertex -8.48528 1.75 8.31472
vertex -7.71345 1.75 7.60747
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.608762 -1.7616e-016 -0.793353
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -7.71345 -1.75 7.60747
vertex -7.71345 1.75 7.60747
vertex -6.88292 -1.75 6.97018
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.608762 -1.7616e-016 -0.793353
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -6.88292 -1.75 6.97018
vertex -7.71345 1.75 7.60747
vertex -6.88292 1.75 6.97018
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.537299 -1.87271e-016 -0.843392
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -6.88292 -1.75 6.97018
vertex -6.88292 1.75 6.97018
vertex -6 -1.75 6.4077
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.537299 -1.87271e-016 -0.843392
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -6 -1.75 6.4077
vertex -6.88292 1.75 6.97018
vertex -6 1.75 6.40769
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.461748 -1.96956e-016 -0.887011
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -6 -1.75 6.4077
vertex -6 1.75 6.40769
vertex -5.07142 -1.75 5.92431
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.461748 -1.96956e-016 -0.887011
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -5.07142 -1.75 5.92431
vertex -6 1.75 6.40769
vertex -5.07142 1.75 5.92431
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.382684 -2.05142e-016 -0.923879
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -5.07142 -1.75 5.92431
vertex -5.07142 1.75 5.92431
vertex -4.10424 -1.75 5.52369
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.382684 -2.05142e-016 -0.923879
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -4.10424 -1.75 5.52369
vertex -5.07142 1.75 5.92431
vertex -4.10424 1.75 5.52369
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.300706 -2.11768e-016 -0.953717
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -4.10424 -1.75 5.52369
vertex -4.10424 1.75 5.52369
vertex -3.10583 -1.75 5.20889
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.300706 -2.11768e-016 -0.953717
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -3.10583 -1.75 5.20889
vertex -4.10424 1.75 5.52369
vertex -3.10583 1.75 5.20889
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.216439 -2.16781e-016 -0.976296
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -3.10583 -1.75 5.20889
vertex -3.10583 1.75 5.20889
vertex -2.08378 -1.75 4.98231
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.216439 -2.16781e-016 -0.976296
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -2.08378 -1.75 4.98231
vertex -3.10583 1.75 5.20889
vertex -2.08378 1.75 4.98231
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.130526 -2.20145e-016 -0.991445
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -2.08378 -1.75 4.98231
vertex -2.08378 1.75 4.98231
vertex -1.04587 -1.75 4.84566
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.130526 -2.20145e-016 -0.991445
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -1.04587 -1.75 4.84566
vertex -2.08378 1.75 4.98231
vertex -1.04587 1.75 4.84566
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.0436197 -2.21833e-016 -0.999048
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -1.04587 -1.75 4.84566
vertex -1.04587 1.75 4.84566
vertex 0 -1.75 4.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.0436197 -2.21833e-016 -0.999048
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 0 -1.75 4.8
vertex -1.04587 1.75 4.84566
vertex 0 1.75 4.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.0436197 -2.21833e-016 -0.999048
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 0 -1.75 4.8
vertex 0 1.75 4.8
vertex 1.04587 -1.75 4.84566
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.0436197 -2.21833e-016 -0.999048
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 1.04587 -1.75 4.84566
vertex 0 1.75 4.8
vertex 1.04587 1.75 4.84566
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.130526 -2.20145e-016 -0.991445
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 1.04587 -1.75 4.84566
vertex 1.04587 1.75 4.84566
vertex 2.08378 -1.75 4.98231
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.130526 -2.20145e-016 -0.991445
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 2.08378 -1.75 4.98231
vertex 1.04587 1.75 4.84566
vertex 2.08378 1.75 4.98231
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.216439 -2.16781e-016 -0.976296
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 2.08378 -1.75 4.98231
vertex 2.08378 1.75 4.98231
vertex 3.10583 -1.75 5.20889
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.216439 -2.16781e-016 -0.976296
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 3.10583 -1.75 5.20889
vertex 2.08378 1.75 4.98231
vertex 3.10583 1.75 5.20889
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.300706 -2.11768e-016 -0.953717
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 3.10583 -1.75 5.20889
vertex 3.10583 1.75 5.20889
vertex 4.10424 -1.75 5.52369
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.300706 -2.11768e-016 -0.953717
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 4.10424 -1.75 5.52369
vertex 3.10583 1.75 5.20889
vertex 4.10424 1.75 5.52369
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.382684 -2.05142e-016 -0.923879
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 4.10424 -1.75 5.52369
vertex 4.10424 1.75 5.52369
vertex 5.07142 -1.75 5.92431
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.382684 -2.05142e-016 -0.923879
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 5.07142 -1.75 5.92431
vertex 4.10424 1.75 5.52369
vertex 5.07142 1.75 5.92431
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.461748 -1.96956e-016 -0.887011
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 5.07142 -1.75 5.92431
vertex 5.07142 1.75 5.92431
vertex 6 -1.75 6.4077
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.461748 -1.96956e-016 -0.887011
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 6 -1.75 6.4077
vertex 5.07142 1.75 5.92431
vertex 6 1.75 6.40769
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.537299 -1.87271e-016 -0.843392
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 6 -1.75 6.4077
vertex 6 1.75 6.40769
vertex 6.88292 -1.75 6.97018
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.537299 -1.87271e-016 -0.843392
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 6.88292 -1.75 6.97018
vertex 6 1.75 6.40769
vertex 6.88292 1.75 6.97018
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.608762 -1.7616e-016 -0.793353
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 6.88292 -1.75 6.97018
vertex 6.88292 1.75 6.97018
vertex 7.71345 -1.75 7.60747
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.608762 -1.7616e-016 -0.793353
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 7.71345 -1.75 7.60747
vertex 6.88292 1.75 6.97018
vertex 7.71345 1.75 7.60747
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.67559 -1.63708e-016 -0.737277
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 7.71345 -1.75 7.60747
vertex 7.71345 1.75 7.60747
vertex 8.48528 -1.75 8.31472
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.67559 -1.63708e-016 -0.737277
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.48528 -1.75 8.31472
vertex 7.71345 1.75 7.60747
vertex 8.48528 1.75 8.31472
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.737277 -1.50011e-016 -0.67559
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.19253 -1.75 9.08655
vertex 8.48528 -1.75 8.31472
vertex 8.48528 1.75 8.31472
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.737277 -1.50011e-016 -0.67559
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.19253 1.75 9.08655
vertex 9.19253 -1.75 9.08655
vertex 8.48528 1.75 8.31472
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.793353 -1.35172e-016 -0.608762
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.82982 -1.75 9.91708
vertex 9.19253 -1.75 9.08655
vertex 9.19253 1.75 9.08655
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.793353 -1.35172e-016 -0.608762
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.82982 1.75 9.91708
vertex 9.82982 -1.75 9.91708
vertex 9.19253 1.75 9.08655
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.843392 -1.19304e-016 -0.537299
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.3923 -1.75 10.8
vertex 9.82982 -1.75 9.91708
vertex 9.82982 1.75 9.91708
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.843392 -1.19304e-016 -0.537299
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.3923 1.75 10.8
vertex 10.3923 -1.75 10.8
vertex 9.82982 1.75 9.91708
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.887011 -1.02529e-016 -0.461748
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.8757 -1.75 11.7286
vertex 10.3923 -1.75 10.8
vertex 10.3923 1.75 10.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.887011 -1.02529e-016 -0.461748
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.8757 1.75 11.7286
vertex 10.8757 -1.75 11.7286
vertex 10.3923 1.75 10.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.923879 -8.49728e-017 -0.382684
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.2763 -1.75 12.6958
vertex 10.8757 -1.75 11.7286
vertex 10.8757 1.75 11.7286
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.923879 -8.49728e-017 -0.382684
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.2763 1.75 12.6958
vertex 11.2763 -1.75 12.6958
vertex 10.8757 1.75 11.7286
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.953717 -6.67702e-017 -0.300706
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 -1.75 13.6942
vertex 11.2763 -1.75 12.6958
vertex 11.2763 1.75 12.6958
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.953717 -6.67702e-017 -0.300706
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 1.75 13.6942
vertex 11.5911 -1.75 13.6942
vertex 11.2763 1.75 12.6958
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.976296 -4.80592e-017 -0.216439
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.8177 -1.75 14.7162
vertex 11.5911 -1.75 13.6942
vertex 11.5911 1.75 13.6942
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.976296 -4.80592e-017 -0.216439
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.8177 1.75 14.7162
vertex 11.8177 -1.75 14.7162
vertex 11.5911 1.75 13.6942
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.991445 -2.89826e-017 -0.130526
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.9543 -1.75 15.7541
vertex 11.8177 -1.75 14.7162
vertex 11.8177 1.75 14.7162
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.991445 -2.89826e-017 -0.130526
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.9543 1.75 15.7541
vertex 11.9543 -1.75 15.7541
vertex 11.8177 1.75 14.7162
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.793353 1.35172e-016 0.608762
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.4681 1.75 8.76993
vertex 10.7246 1.75 7.80097
vertex 11.4681 -1.75 8.76993
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.793353 1.35172e-016 0.608762
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.4681 -1.75 8.76993
vertex 10.7246 1.75 7.80097
vertex 10.7246 -1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.737277 1.50011e-016 0.67559
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.7246 1.75 7.80097
vertex 9.89949 1.75 6.9005
vertex 10.7246 -1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.737277 1.50011e-016 0.67559
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 10.7246 -1.75 7.80097
vertex 9.89949 1.75 6.9005
vertex 9.89949 -1.75 6.90051
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 9.89949 -1.75 6.90051
vertex 9.89949 1.75 6.9005
vertex 8.99903 1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.99903 -1.75 6.07538
vertex 9.89949 -1.75 6.90051
vertex 8.99903 1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.608762 1.7616e-016 0.793353
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.99903 -1.75 6.07538
vertex 8.99903 1.75 6.07538
vertex 8.03007 1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.608762 1.7616e-016 0.793353
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.03007 -1.75 5.33187
vertex 8.99903 -1.75 6.07538
vertex 8.03007 1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.5373 1.87271e-016 0.843391
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 8.03007 -1.75 5.33187
vertex 8.03007 1.75 5.33187
vertex 7 1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.5373 1.87271e-016 0.843391
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 7 -1.75 4.67564
vertex 8.03007 -1.75 5.33187
vertex 7 1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.461748 1.96956e-016 0.887011
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 7 -1.75 4.67564
vertex 7 1.75 4.67564
vertex 5.91666 1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.461748 1.96956e-016 0.887011
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 5.91666 -1.75 4.11169
vertex 7 -1.75 4.67564
vertex 5.91666 1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.382684 2.05142e-016 0.923879
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 5.91666 -1.75 4.11169
vertex 5.91666 1.75 4.11169
vertex 4.78828 1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.382684 2.05142e-016 0.923879
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 4.78828 -1.75 3.6443
vertex 5.91666 -1.75 4.11169
vertex 4.78828 1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.300706 2.11768e-016 0.953717
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 4.78828 -1.75 3.6443
vertex 4.78828 1.75 3.6443
vertex 3.62347 1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.300706 2.11768e-016 0.953717
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 3.62347 -1.75 3.27704
vertex 4.78828 -1.75 3.6443
vertex 3.62347 1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.216439 2.16781e-016 0.976296
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 3.62347 -1.75 3.27704
vertex 3.62347 1.75 3.27704
vertex 2.43107 1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.216439 2.16781e-016 0.976296
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 2.43107 -1.75 3.01269
vertex 3.62347 -1.75 3.27704
vertex 2.43107 1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.130526 2.20145e-016 0.991445
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 2.43107 -1.75 3.01269
vertex 2.43107 1.75 3.01269
vertex 1.22018 1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.130526 2.20145e-016 0.991445
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 1.22018 -1.75 2.85327
vertex 2.43107 -1.75 3.01269
vertex 1.22018 1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.0436192 2.21833e-016 0.999048
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 1.22018 -1.75 2.85327
vertex 1.22018 1.75 2.85327
vertex 0 1.75 2.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.0436192 2.21833e-016 0.999048
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 0 -1.75 2.8
vertex 1.22018 -1.75 2.85327
vertex 0 1.75 2.8
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.0436192 2.21833e-016 0.999048
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 0 -1.75 2.8
vertex 0 1.75 2.8
vertex -1.22018 1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.0436192 2.21833e-016 0.999048
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -1.22018 -1.75 2.85327
vertex 0 -1.75 2.8
vertex -1.22018 1.75 2.85327
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.130526 2.20145e-016 0.991445
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -1.22018 -1.75 2.85327
vertex -1.22018 1.75 2.85327
vertex -2.43107 1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.130526 2.20145e-016 0.991445
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -2.43107 -1.75 3.01269
vertex -1.22018 -1.75 2.85327
vertex -2.43107 1.75 3.01269
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.216439 2.16781e-016 0.976296
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -2.43107 -1.75 3.01269
vertex -2.43107 1.75 3.01269
vertex -3.62347 1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.216439 2.16781e-016 0.976296
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -3.62347 -1.75 3.27704
vertex -2.43107 -1.75 3.01269
vertex -3.62347 1.75 3.27704
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.300706 2.11768e-016 0.953717
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -3.62347 -1.75 3.27704
vertex -3.62347 1.75 3.27704
vertex -4.78828 1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.300706 2.11768e-016 0.953717
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -4.78828 -1.75 3.6443
vertex -3.62347 -1.75 3.27704
vertex -4.78828 1.75 3.6443
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.382684 2.05142e-016 0.923879
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -4.78828 -1.75 3.6443
vertex -4.78828 1.75 3.6443
vertex -5.91666 1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.382684 2.05142e-016 0.923879
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -5.91666 -1.75 4.11169
vertex -4.78828 -1.75 3.6443
vertex -5.91666 1.75 4.11169
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.461748 1.96956e-016 0.887011
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -5.91666 -1.75 4.11169
vertex -5.91666 1.75 4.11169
vertex -7 1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.461748 1.96956e-016 0.887011
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -7 -1.75 4.67564
vertex -5.91666 -1.75 4.11169
vertex -7 1.75 4.67564
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.5373 1.87271e-016 0.843391
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -7 -1.75 4.67564
vertex -7 1.75 4.67564
vertex -8.03007 1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.5373 1.87271e-016 0.843391
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.03007 -1.75 5.33187
vertex -7 -1.75 4.67564
vertex -8.03007 1.75 5.33187
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.608762 1.7616e-016 0.793353
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.03007 -1.75 5.33187
vertex -8.03007 1.75 5.33187
vertex -8.99903 1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.608762 1.7616e-016 0.793353
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.99903 -1.75 6.07538
vertex -8.03007 -1.75 5.33187
vertex -8.99903 1.75 6.07538
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -8.99903 -1.75 6.07538
vertex -8.99903 1.75 6.07538
vertex -9.89949 1.75 6.9005
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.89949 -1.75 6.90051
vertex -8.99903 -1.75 6.07538
vertex -9.89949 1.75 6.9005
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.737277 1.50011e-016 0.67559
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -9.89949 -1.75 6.90051
vertex -9.89949 1.75 6.9005
vertex -10.7246 1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.737277 1.50011e-016 0.67559
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex -10.7246 -1.75 7.80097
vertex -9.89949 -1.75 6.90051
vertex -10.7246 1.75 7.80097
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.976296 -4.80594e-017 -0.21644
outer loop
vertex -9.35567 -8.75 18.4497
vertex -9.17629 -8.75 19.2588
vertex -9.17629 -17.5 19.2588
endloop
endfacet
facet normal 0.976296 -4.80594e-017 -0.21644
outer loop
vertex -9.35567 -17.5 18.4497
vertex -9.35567 -8.75 18.4497
vertex -9.17629 -17.5 19.2588
endloop
endfacet
facet normal 0.991445 -2.89826e-017 -0.130526
outer loop
vertex -9.46385 -8.75 17.628
vertex -9.35567 -8.75 18.4497
vertex -9.35567 -17.5 18.4497
endloop
endfacet
facet normal 0.991445 -2.89826e-017 -0.130526
outer loop
vertex -9.46385 -17.5 17.628
vertex -9.46385 -8.75 17.628
vertex -9.35567 -17.5 18.4497
endloop
endfacet
facet normal 0.999048 -9.68535e-018 -0.0436189
outer loop
vertex -9.5 -8.75 16.8
vertex -9.46385 -8.75 17.628
vertex -9.46385 -17.5 17.628
endloop
endfacet
facet normal 0.999048 -9.68535e-018 -0.0436189
outer loop
vertex -9.5 -17.5 16.8
vertex -9.5 -8.75 16.8
vertex -9.46385 -17.5 17.628
endloop
endfacet
facet normal 0.999048 9.68535e-018 0.0436189
outer loop
vertex -9.46385 -17.5 15.972
vertex -9.46385 -8.75 15.972
vertex -9.5 -8.75 16.8
endloop
endfacet
facet normal 0.999048 9.68535e-018 0.0436189
outer loop
vertex -9.5 -17.5 16.8
vertex -9.46385 -17.5 15.972
vertex -9.5 -8.75 16.8
endloop
endfacet
facet normal 0.991445 2.89826e-017 0.130526
outer loop
vertex -9.35567 -17.5 15.1503
vertex -9.35567 -8.75 15.1503
vertex -9.46385 -8.75 15.972
endloop
endfacet
facet normal 0.991445 2.89826e-017 0.130526
outer loop
vertex -9.46385 -17.5 15.972
vertex -9.35567 -17.5 15.1503
vertex -9.46385 -8.75 15.972
endloop
endfacet
facet normal 0.976296 4.80594e-017 0.21644
outer loop
vertex -9.17629 -17.5 14.3412
vertex -9.17629 -8.75 14.3412
vertex -9.35567 -8.75 15.1503
endloop
endfacet
facet normal 0.976296 4.80594e-017 0.21644
outer loop
vertex -9.35567 -17.5 15.1503
vertex -9.17629 -17.5 14.3412
vertex -9.35567 -8.75 15.1503
endloop
endfacet
facet normal 0.953717 6.677e-017 0.300705
outer loop
vertex -8.92708 -17.5 13.5508
vertex -8.92708 -8.75 13.5508
vertex -9.17629 -8.75 14.3412
endloop
endfacet
facet normal 0.953717 6.677e-017 0.300705
outer loop
vertex -9.17629 -17.5 14.3412
vertex -8.92708 -17.5 13.5508
vertex -9.17629 -8.75 14.3412
endloop
endfacet
facet normal 0.923879 8.49728e-017 0.382684
outer loop
vertex -8.60992 -17.5 12.7851
vertex -8.60992 -8.75 12.7851
vertex -8.92708 -8.75 13.5508
endloop
endfacet
facet normal 0.923879 8.49728e-017 0.382684
outer loop
vertex -8.92708 -17.5 13.5508
vertex -8.60992 -17.5 12.7851
vertex -8.92708 -8.75 13.5508
endloop
endfacet
facet normal 0.887011 1.02529e-016 0.461749
outer loop
vertex -8.22724 -17.5 12.05
vertex -8.22724 -8.75 12.05
vertex -8.60992 -8.75 12.7851
endloop
endfacet
facet normal 0.887011 1.02529e-016 0.461749
outer loop
vertex -8.60992 -17.5 12.7851
vertex -8.22724 -17.5 12.05
vertex -8.60992 -8.75 12.7851
endloop
endfacet
facet normal 0.843391 1.19305e-016 0.5373
outer loop
vertex -7.78194 -17.5 11.351
vertex -7.78194 -8.75 11.351
vertex -8.22724 -8.75 12.05
endloop
endfacet
facet normal 0.843391 1.19305e-016 0.5373
outer loop
vertex -8.22724 -17.5 12.05
vertex -7.78194 -17.5 11.351
vertex -8.22724 -8.75 12.05
endloop
endfacet
facet normal 0.793353 1.35172e-016 0.608761
outer loop
vertex -7.27742 -17.5 10.6935
vertex -7.27742 -8.75 10.6935
vertex -7.78194 -8.75 11.351
endloop
endfacet
facet normal 0.793353 1.35172e-016 0.608761
outer loop
vertex -7.78194 -17.5 11.351
vertex -7.27742 -17.5 10.6935
vertex -7.78194 -8.75 11.351
endloop
endfacet
facet normal 0.737277 1.50011e-016 0.67559
outer loop
vertex -6.71751 -17.5 10.0825
vertex -6.71751 -8.75 10.0825
vertex -7.27742 -8.75 10.6935
endloop
endfacet
facet normal 0.737277 1.50011e-016 0.67559
outer loop
vertex -7.27742 -17.5 10.6935
vertex -6.71751 -17.5 10.0825
vertex -7.27742 -8.75 10.6935
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
vertex -6.10648 -8.75 9.52258
vertex -6.40923 -14.7 9.8
vertex -6.10648 -14.7 9.52258
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
vertex -6.71751 -8.75 10.0825
vertex -6.40923 -14.7 9.8
vertex -6.10648 -8.75 9.52258
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
vertex -6.40923 -17.5 9.8
vertex -6.40923 -14.7 9.8
vertex -6.71751 -8.75 10.0825
endloop
endfacet
facet normal 0.67559 1.63708e-016 0.737277
outer loop
vertex -6.71751 -17.5 10.0825
vertex -6.40923 -17.5 9.8
vertex -6.71751 -8.75 10.0825
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 19.49 -17.5 4
vertex 19.49 -17.5 0
vertex 19.49 -17.494 0
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 19.49 -17.494 4
vertex 19.49 -17.5 4
vertex 19.49 -17.494 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.98 -9.855 0
vertex 20.228 -6.55 0
vertex 20.714 -6.638 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -6.506 0
vertex 11.99 -6.5 0
vertex 19.49 -6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 15.29 -12 0
vertex 11.99 -6.5 0
vertex 15.345 -11.51 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.98 -9.855 0
vertex 19.737 -6.506 0
vertex 20.228 -6.55 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 20.445 -10.018 0
vertex 20.714 -6.638 0
vertex 21.19 -6.769 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 20.862 -10.28 0
vertex 21.19 -6.769 0
vertex 21.652 -6.943 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.21 -10.628 0
vertex 21.652 -6.943 0
vertex 22.096 -7.157 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.472 -11.045 0
vertex 22.52 -7.41 0
vertex 22.919 -7.7 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.635 -11.51 0
vertex 22.919 -7.7 0
vertex 23.291 -8.025 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.635 -12.49 0
vertex 23.291 -8.025 0
vertex 23.632 -8.381 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 20.862 -10.28 0
vertex 21.652 -6.943 0
vertex 21.21 -10.628 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.98 -14.145 0
vertex 19.49 -17.494 0
vertex 19.49 -14.2 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 11.99 -17.5 0
vertex 11.99 -6.5 0
vertex 15.29 -12 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 17.49 -14.2 0
vertex 19.49 -17.5 0
vertex 17 -14.145 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 11.99 -17.5 0
vertex 15.29 -12 0
vertex 15.345 -12.49 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 11.99 -17.5 0
vertex 15.345 -12.49 0
vertex 15.508 -12.955 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 11.99 -17.5 0
vertex 15.508 -12.955 0
vertex 15.77 -13.372 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 11.99 -17.5 0
vertex 15.77 -13.372 0
vertex 19.49 -17.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 15.77 -13.372 0
vertex 16.118 -13.72 0
vertex 19.49 -17.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 17 -14.145 0
vertex 19.49 -17.5 0
vertex 16.535 -13.982 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 16.535 -13.982 0
vertex 19.49 -17.5 0
vertex 16.118 -13.72 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 17.49 -14.2 0
vertex 19.49 -17.494 0
vertex 19.49 -17.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -14.2 0
vertex 19.49 -17.494 0
vertex 17.49 -14.2 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 17.49 -9.8 0
vertex 19.49 -6.506 0
vertex 19.49 -9.8 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.69 -12 0
vertex 23.291 -8.025 0
vertex 21.635 -12.49 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.472 -11.045 0
vertex 22.919 -7.7 0
vertex 21.635 -11.51 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.98 -9.855 0
vertex 20.714 -6.638 0
vertex 20.445 -10.018 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -6.506 0
vertex 19.737 -6.506 0
vertex 19.49 -9.8 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 15.345 -11.51 0
vertex 11.99 -6.5 0
vertex 15.508 -11.045 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -6.506 0
vertex 17.49 -9.8 0
vertex 11.99 -6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 17.49 -9.8 0
vertex 17 -9.855 0
vertex 11.99 -6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 17 -9.855 0
vertex 16.535 -10.018 0
vertex 11.99 -6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 16.535 -10.018 0
vertex 16.118 -10.28 0
vertex 11.99 -6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 16.118 -10.28 0
vertex 15.77 -10.628 0
vertex 11.99 -6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 15.77 -10.628 0
vertex 15.508 -11.045 0
vertex 11.99 -6.5 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -9.8 0
vertex 19.737 -6.506 0
vertex 19.98 -9.855 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 20.445 -10.018 0
vertex 21.19 -6.769 0
vertex 20.862 -10.28 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 20.445 -13.982 0
vertex 19.49 -17.494 0
vertex 19.98 -14.145 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.21 -10.628 0
vertex 22.52 -7.41 0
vertex 21.472 -11.045 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.21 -10.628 0
vertex 22.096 -7.157 0
vertex 22.52 -7.41 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 20.862 -13.72 0
vertex 19.49 -17.494 0
vertex 20.445 -13.982 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.635 -11.51 0
vertex 23.291 -8.025 0
vertex 21.69 -12 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.21 -13.372 0
vertex 19.49 -17.494 0
vertex 20.862 -13.72 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 21.635 -12.49 0
vertex 23.632 -8.381 0
vertex 21.472 -12.955 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 21.21 -13.372 0
vertex 21.472 -12.955 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 21.472 -12.955 0
vertex 23.632 -8.381 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 23.632 -8.381 0
vertex 23.94 -8.767 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 23.94 -8.767 0
vertex 24.211 -9.179 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.211 -9.179 0
vertex 24.445 -9.614 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.445 -9.614 0
vertex 24.639 -10.067 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.639 -10.067 0
vertex 24.792 -10.537 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.792 -10.537 0
vertex 24.902 -11.018 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.902 -11.018 0
vertex 24.968 -11.507 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.968 -11.507 0
vertex 24.99 -12 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.99 -12 0
vertex 24.968 -12.493 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.968 -12.493 0
vertex 24.902 -12.982 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.902 -12.982 0
vertex 24.792 -13.463 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.792 -13.463 0
vertex 24.639 -13.933 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.639 -13.933 0
vertex 24.445 -14.386 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.445 -14.386 0
vertex 24.211 -14.821 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 24.211 -14.821 0
vertex 23.94 -15.233 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 23.94 -15.233 0
vertex 23.632 -15.619 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 23.632 -15.619 0
vertex 23.291 -15.975 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 23.291 -15.975 0
vertex 22.919 -16.3 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 22.919 -16.3 0
vertex 22.52 -16.59 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 22.52 -16.59 0
vertex 22.096 -16.843 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 22.096 -16.843 0
vertex 21.652 -17.057 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 21.652 -17.057 0
vertex 21.19 -17.231 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 21.19 -17.231 0
vertex 20.714 -17.362 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 20.714 -17.362 0
vertex 20.228 -17.45 0
endloop
endfacet
facet normal 0 0 -1
outer loop
vertex 19.49 -17.494 0
vertex 20.228 -17.45 0
vertex 19.737 -17.494 0
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 19.49 -6.506 4
vertex 19.49 -6.506 0
vertex 19.49 -6.5 0
endloop
endfacet
facet normal 1 0 0
outer loop
vertex 19.49 -6.5 4
vertex 19.49 -6.506 4
vertex 19.49 -6.5 0
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.40923 -14.7 9.8
vertex 6.40923 -14.7 9.8
vertex -6.10648 -14.7 9.52258
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 6.40923 -14.7 9.8
vertex 6.10648 -14.7 9.52258
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 6.10648 -14.7 9.52258
vertex 5.44898 -14.7 9.01806
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 5.44898 -14.7 9.01806
vertex 4.75 -14.7 8.57276
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 4.75 -14.7 8.57276
vertex 4.01487 -14.7 8.19008
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 4.01487 -14.7 8.19008
vertex 3.24919 -14.7 7.87292
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 3.24919 -14.7 7.87292
vertex 2.45878 -14.7 7.62371
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 2.45878 -14.7 7.62371
vertex 1.64966 -14.7 7.44433
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 1.64966 -14.7 7.44433
vertex 0.82798 -14.7 7.33615
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 0.82798 -14.7 7.33615
vertex 0 -14.7 7.3
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex 0 -14.7 7.3
vertex -0.82798 -14.7 7.33615
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex -0.82798 -14.7 7.33615
vertex -1.64966 -14.7 7.44433
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex -1.64966 -14.7 7.44433
vertex -2.45878 -14.7 7.62371
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex -2.45878 -14.7 7.62371
vertex -3.24919 -14.7 7.87292
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex -3.24919 -14.7 7.87292
vertex -4.01487 -14.7 8.19008
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex -4.01487 -14.7 8.19008
vertex -4.75 -14.7 8.57276
endloop
endfacet
facet normal 0 1 0
outer loop
vertex -6.10648 -14.7 9.52258
vertex -4.75 -14.7 8.57276
vertex -5.44898 -14.7 9.01806
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
vertex 6.40923 -14.7 9.8
vertex 6.40923 -17.5 9.8
vertex 6.71751 -17.5 10.0825
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
vertex 6.10648 -8.75 9.52258
vertex 6.40923 -14.7 9.8
vertex 6.71751 -8.75 10.0825
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
vertex 6.71751 -8.75 10.0825
vertex 6.40923 -14.7 9.8
vertex 6.71751 -17.5 10.0825
endloop
endfacet
facet normal -0.67559 1.63708e-016 0.737277
outer loop
vertex 6.10648 -14.7 9.52258
vertex 6.40923 -14.7 9.8
vertex 6.10648 -8.75 9.52258
endloop
endfacet
facet normal -0.737277 1.50011e-016 0.67559
outer loop
vertex 7.27742 -8.75 10.6935
vertex 6.71751 -8.75 10.0825
vertex 7.27742 -17.5 10.6935
endloop
endfacet
facet normal -0.737277 1.50011e-016 0.67559
outer loop
vertex 7.27742 -17.5 10.6935
vertex 6.71751 -8.75 10.0825
vertex 6.71751 -17.5 10.0825
endloop
endfacet
facet normal -0.793353 1.35172e-016 0.608761
outer loop
vertex 7.78194 -8.75 11.351
vertex 7.27742 -8.75 10.6935
vertex 7.78194 -17.5 11.351
endloop
endfacet
facet normal -0.793353 1.35172e-016 0.608761
outer loop
vertex 7.78194 -17.5 11.351
vertex 7.27742 -8.75 10.6935
vertex 7.27742 -17.5 10.6935
endloop
endfacet
facet normal -0.843391 1.19305e-016 0.5373
outer loop
vertex 8.22724 -8.75 12.05
vertex 7.78194 -8.75 11.351
vertex 8.22724 -17.5 12.05
endloop
endfacet
facet normal -0.843391 1.19305e-016 0.5373
outer loop
vertex 8.22724 -17.5 12.05
vertex 7.78194 -8.75 11.351
vertex 7.78194 -17.5 11.351
endloop
endfacet
facet normal -0.887011 1.02529e-016 0.461749
outer loop
vertex 8.60992 -8.75 12.7851
vertex 8.22724 -8.75 12.05
vertex 8.60992 -17.5 12.7851
endloop
endfacet
facet normal -0.887011 1.02529e-016 0.461749
outer loop
vertex 8.60992 -17.5 12.7851
vertex 8.22724 -8.75 12.05
vertex 8.22724 -17.5 12.05
endloop
endfacet
facet normal -0.923879 8.49728e-017 0.382684
outer loop
vertex 8.92708 -8.75 13.5508
vertex 8.60992 -8.75 12.7851
vertex 8.92708 -17.5 13.5508
endloop
endfacet
facet normal -0.923879 8.49728e-017 0.382684
outer loop
vertex 8.92708 -17.5 13.5508
vertex 8.60992 -8.75 12.7851
vertex 8.60992 -17.5 12.7851
endloop
endfacet
facet normal -0.953717 6.677e-017 0.300705
outer loop
vertex 9.17629 -8.75 14.3412
vertex 8.92708 -8.75 13.5508
vertex 9.17629 -17.5 14.3412
endloop
endfacet
facet normal -0.953717 6.677e-017 0.300705
outer loop
vertex 9.17629 -17.5 14.3412
vertex 8.92708 -8.75 13.5508
vertex 8.92708 -17.5 13.5508
endloop
endfacet
facet normal -0.976296 4.80594e-017 0.21644
outer loop
vertex 9.35567 -8.75 15.1503
vertex 9.17629 -8.75 14.3412
vertex 9.35567 -17.5 15.1503
endloop
endfacet
facet normal -0.976296 4.80594e-017 0.21644
outer loop
vertex 9.35567 -17.5 15.1503
vertex 9.17629 -8.75 14.3412
vertex 9.17629 -17.5 14.3412
endloop
endfacet
facet normal -0.991445 2.89826e-017 0.130526
outer loop
vertex 9.46385 -8.75 15.972
vertex 9.35567 -8.75 15.1503
vertex 9.46385 -17.5 15.972
endloop
endfacet
facet normal -0.991445 2.89826e-017 0.130526
outer loop
vertex 9.46385 -17.5 15.972
vertex 9.35567 -8.75 15.1503
vertex 9.35567 -17.5 15.1503
endloop
endfacet
facet normal -0.999048 9.68535e-018 0.0436189
outer loop
vertex 9.5 -8.75 16.8
vertex 9.46385 -8.75 15.972
vertex 9.5 -17.5 16.8
endloop
endfacet
facet normal -0.999048 9.68535e-018 0.0436189
outer loop
vertex 9.5 -17.5 16.8
vertex 9.46385 -8.75 15.972
vertex 9.46385 -17.5 15.972
endloop
endfacet
facet normal -0.999048 -9.68535e-018 -0.0436189
outer loop
vertex 9.5 -8.75 16.8
vertex 9.5 -17.5 16.8
vertex 9.46385 -8.75 17.628
endloop
endfacet
facet normal -0.999048 -9.68535e-018 -0.0436189
outer loop
vertex 9.46385 -8.75 17.628
vertex 9.5 -17.5 16.8
vertex 9.46385 -17.5 17.628
endloop
endfacet
facet normal -0.991445 -2.89826e-017 -0.130526
outer loop
vertex 9.46385 -8.75 17.628
vertex 9.46385 -17.5 17.628
vertex 9.35567 -8.75 18.4497
endloop
endfacet
facet normal -0.991445 -2.89826e-017 -0.130526
outer loop
vertex 9.35567 -8.75 18.4497
vertex 9.46385 -17.5 17.628
vertex 9.35567 -17.5 18.4497
endloop
endfacet
facet normal -0.976296 -4.80594e-017 -0.21644
outer loop
vertex 9.35567 -8.75 18.4497
vertex 9.35567 -17.5 18.4497
vertex 9.17629 -8.75 19.2588
endloop
endfacet
facet normal -0.976296 -4.80594e-017 -0.21644
outer loop
vertex 9.17629 -8.75 19.2588
vertex 9.35567 -17.5 18.4497
vertex 9.17629 -17.5 19.2588
endloop
endfacet
facet normal -0.953717 -6.677e-017 -0.300705
outer loop
vertex 9.17629 -17.5 19.2588
vertex 8.9531 -17.5 19.9667
vertex 9.17629 -8.75 19.2588
endloop
endfacet
facet normal -0.953717 -6.677e-017 -0.300705
outer loop
vertex 9.17629 -8.75 19.2588
vertex 8.9531 -17.5 19.9667
vertex 8.9531 -8.75 19.9667
endloop
endfacet
facet normal 0.953717 6.67702e-017 0.300706
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 1.75 19.9058
vertex 11.5719 1.75 19.9667
vertex 11.5719 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.953717 6.67702e-017 0.300706
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 -1.75 19.9058
vertex 11.5911 1.75 19.9058
vertex 11.5719 -1.75 19.9667
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.953717 -6.67701e-017 -0.300706
outer loop
vertex 9.65926 -8.75 19.3882
vertex 9.47687 -8.75 19.9667
vertex 9.65926 8.75 19.3882
endloop
endfacet
facet normal -0.953717 -6.67701e-017 -0.300706
outer loop
vertex 9.65926 8.75 19.3882
vertex 9.47687 -8.75 19.9667
vertex 9.47687 8.75 19.9667
endloop
endfacet
facet normal -0.953717 -6.677e-017 -0.300705
outer loop
vertex 9.17629 8.75 19.2588
vertex 8.9531 8.75 19.9667
vertex 9.17629 17.5 19.2588
endloop
endfacet
facet normal -0.953717 -6.677e-017 -0.300705
outer loop
vertex 9.17629 17.5 19.2588
vertex 8.9531 8.75 19.9667
vertex 8.9531 17.5 19.9667
endloop
endfacet
facet normal 0.976296 4.80592e-017 0.216439
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.5911 1.75 19.9058
vertex 11.5911 -1.75 19.9058
vertex 11.8177 -1.75 18.8838
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.976296 4.80592e-017 0.216439
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.8177 1.75 18.8838
vertex 11.5911 1.75 19.9058
vertex 11.8177 -1.75 18.8838
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.991445 2.89826e-017 0.130526
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.8177 1.75 18.8838
vertex 11.8177 -1.75 18.8838
vertex 11.9543 -1.75 17.8459
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal 0.991445 2.89826e-017 0.130526
outer loop
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
vertex 11.9543 1.75 17.8459
vertex 11.8177 1.75 18.8838
vertex 11.9543 -1.75 17.8459
2012-03-12 02:54:18 +00:00
endloop
endfacet
facet normal -0.976296 -4.80594e-017 -0.21644
outer loop
vertex 9.35567 17.5 18.4497
vertex 9.35567 8.75 18.4497
vertex 9.17629 17.5 19.2588
endloop
endfacet
facet normal -0.976296 -4.80594e-017 -0.21644
outer loop
vertex 9.17629 17.5 19.2588
vertex 9.35567 8.75 18.4497
vertex 9.17629 8.75 19.2588
endloop
endfacet
facet normal -0.991445 -2.89826e-017 -0.130526
outer loop
vertex 9.46385 17.5 17.628
vertex 9.46385 8.75 17.628
vertex 9.35567 17.5 18.4497
endloop
endfacet
facet normal -0.991445 -2.89826e-017 -0.130526
outer loop
vertex 9.35567 17.5 18.4497
vertex 9.46385 8.75 17.628
vertex 9.35567 8.75 18.4497
endloop
endfacet
facet normal -0.999048 -9.68535e-018 -0.0436189
outer loop
vertex 9.5 17.5 16.8
vertex 9.5 8.75 16.8
vertex 9.46385 17.5 17.628
endloop
endfacet
facet normal -0.999048 -9.68535e-018 -0.0436189
outer loop
vertex 9.46385 17.5 17.628
vertex 9.5 8.75 16.8
vertex 9.46385 8.75 17.628
endloop
endfacet
facet normal -0.999048 9.68535e-018 0.0436189
outer loop
vertex 9.5 17.5 16.8
vertex 9.46385 17.5 15.972
vertex 9.5 8.75 16.8
endloop
endfacet
facet normal -0.999048 9.68535e-018 0.0436189
outer loop
vertex 9.5 8.75 16.8
vertex 9.46385 17.5 15.972
vertex 9.46385 8.75 15.972
endloop
endfacet
facet normal -0.991445 2.89826e-017 0.130526
outer loop
vertex 9.46385 17.5 15.972
vertex 9.35567 17.5 15.1503
vertex 9.46385 8.75 15.972
endloop
endfacet
facet normal -0.991445 2.89826e-017 0.130526
outer loop
vertex 9.46385 8.75 15.972
vertex 9.35567 17.5 15.1503
vertex 9.35567 8.75 15.1503
endloop
endfacet
facet normal -0.976296 4.80594e-017 0.21644
outer loop
vertex 9.35567 17.5 15.1503
vertex 9.17629 17.5 14.3412
vertex 9.35567 8.75 15.1503
endloop
endfacet
facet normal -0.976296 4.80594e-017 0.21644
outer loop
vertex 9.35567 8.75 15.1503
vertex 9.17629 17.5 14.3412
vertex 9.17629 8.75 14.3412
endloop
endfacet
facet normal -0.953717 6.677e-017 0.300705
outer loop
vertex 9.17629 17.5 14.3412
vertex 8.92708 17.5 13.5508
vertex 9.17629 8.75 14.3412
endloop
endfacet
facet normal -0.953717 6.677e-017 0.300705
outer loop
vertex 9.17629 8.75 14.3412
vertex 8.92708 17.5 13.5508
vertex 8.92708 8.75 13.5508
endloop
endfacet
facet normal -0.923879 8.49728e-017 0.382684
outer loop
vertex 8.92708 17.5 13.5508
vertex 8.60992 17.5 12.7851
vertex 8.92708 8.75 13.5508
endloop
endfacet
facet normal -0.923879 8.49728e-017 0.382684
outer loop
vertex 8.92708 8.75 13.5508
vertex 8.60992 17.5 12.7851
vertex 8.60992 8.75 12.7851
endloop
endfacet
facet normal -0.887011 1.02529e-016 0.461749
outer loop
vertex 8.60992 17.5 12.7851
vertex 8.22724 17.5 12.05
vertex 8.60992 8.75 12.7851
endloop
endfacet
facet normal -0.887011 1.02529e-016 0.461749
outer loop
vertex 8.60992 8.75 12.7851
vertex 8.22724 17.5 12.05
vertex 8.22724 8.75 12.05
endloop
endfacet
facet normal -0.843391 1.19305e-016 0.5373
outer loop
vertex 8.22724 17.5 12.05
vertex 7.78194 17.5 11.351
vertex 8.22724 8.75 12.05
endloop
endfacet
facet normal -0.843391 1.19305e-016 0.5373
outer loop
vertex 8.22724 8.75 12.05
vertex 7.78194 17.5 11.351
vertex 7.78194 8.75 11.351
endloop
endfacet
facet normal -0.793353 1.35172e-016 0.608761
outer loop
vertex 7.78194 17.5 11.351
vertex 7.27742 17.5 10.6935
vertex 7.78194 8.75 11.351
endloop
endfacet
facet normal -0.793353 1.35172e-016 0.608761
outer loop
vertex 7.78194 8.75 11.351
vertex 7.27742 17.5 10.6935
vertex 7.27742 8.75 10.6935
endloop
endfacet
facet normal -0.737277 1.50011e-016 0.67559
outer loop
vertex 7.27742 17.5 10.6935
vertex 6.71751 17.5 10.0825
vertex 7.27742 8.75 10.6935
endloop
endfacet
facet normal -0.737277 1.50011e-016 0.67559
outer loop
vertex 7.27742 8.75 10.6935
vertex 6.71751 17.5 10.0825
vertex 6.71751 8.75 10.0825
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 19.49 -6.506 0
vertex 19.49 -6.506 4
vertex 19.737 -6.506 0
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 19.737 -6.506 0
vertex 19.49 -6.506 4
vertex 19.737 -6.506 4
endloop
endfacet
facet normal 0.0892554 0.996009 0
outer loop
vertex 19.737 -6.506 0
vertex 19.737 -6.506 4
vertex 20.228 -6.55 0
endloop
endfacet
facet normal 0.0892554 0.996009 0
outer loop
vertex 20.228 -6.55 0
vertex 19.737 -6.506 4
vertex 20.228 -6.55 4
endloop
endfacet
facet normal 0.178173 0.983999 0
outer loop
vertex 20.228 -6.55 0
vertex 20.228 -6.55 4
vertex 20.714 -6.638 0
endloop
endfacet
facet normal 0.178173 0.983999 0
outer loop
vertex 20.714 -6.638 0
vertex 20.228 -6.55 4
vertex 20.714 -6.638 4
endloop
endfacet
facet normal 0.265345 0.964154 0
outer loop
vertex 20.714 -6.638 0
vertex 20.714 -6.638 4
vertex 21.19 -6.769 0
endloop
endfacet
facet normal 0.265345 0.964154 0
outer loop
vertex 21.19 -6.769 0
vertex 20.714 -6.638 4
vertex 21.19 -6.769 4
endloop
endfacet
facet normal 0.352455 0.935829 0
outer loop
vertex 21.19 -6.769 0
vertex 21.19 -6.769 4
vertex 21.652 -6.943 0
endloop
endfacet
facet normal 0.352455 0.935829 0
outer loop
vertex 21.652 -6.943 0
vertex 21.19 -6.769 4
vertex 21.652 -6.943 4
endloop
endfacet
facet normal 0.434182 0.900825 0
outer loop
vertex 21.652 -6.943 0
vertex 21.652 -6.943 4
vertex 22.096 -7.157 0
endloop
endfacet
facet normal 0.434182 0.900825 0
outer loop
vertex 22.096 -7.157 0
vertex 21.652 -6.943 4
vertex 22.096 -7.157 4
endloop
endfacet
facet normal 0.512409 0.858741 0
outer loop
vertex 22.096 -7.157 0
vertex 22.096 -7.157 4
vertex 22.52 -7.41 0
endloop
endfacet
facet normal 0.512409 0.858741 0
outer loop
vertex 22.52 -7.41 0
vertex 22.096 -7.157 4
vertex 22.52 -7.41 4
endloop
endfacet
facet normal 0.587931 0.808911 0
outer loop
vertex 22.52 -7.41 0
vertex 22.52 -7.41 4
vertex 22.919 -7.7 0
endloop
endfacet
facet normal 0.587931 0.808911 0
outer loop
vertex 22.919 -7.7 0
vertex 22.52 -7.41 4
vertex 22.919 -7.7 4
endloop
endfacet
facet normal 0.657931 0.753078 0
outer loop
vertex 22.919 -7.7 0
vertex 22.919 -7.7 4
vertex 23.291 -8.025 0
endloop
endfacet
facet normal 0.657931 0.753078 0
outer loop
vertex 23.291 -8.025 0
vertex 22.919 -7.7 4
vertex 23.291 -8.025 4
endloop
endfacet
facet normal 0.722157 0.691729 0
outer loop
vertex 23.632 -8.381 0
vertex 23.291 -8.025 0
vertex 23.291 -8.025 4
endloop
endfacet
facet normal 0.722157 0.691729 0
outer loop
vertex 23.632 -8.381 4
vertex 23.632 -8.381 0
vertex 23.291 -8.025 4
endloop
endfacet
facet normal 0.781658 0.623707 0
outer loop
vertex 23.94 -8.767 0
vertex 23.632 -8.381 0
vertex 23.632 -8.381 4
endloop
endfacet
facet normal 0.781658 0.623707 0
outer loop
vertex 23.94 -8.767 4
vertex 23.94 -8.767 0
vertex 23.632 -8.381 4
endloop
endfacet
facet normal 0.835466 0.549542 0
outer loop
vertex 24.211 -9.179 0
vertex 23.94 -8.767 0
vertex 23.94 -8.767 4
endloop
endfacet
facet normal 0.835466 0.549542 0
outer loop
vertex 24.211 -9.179 4
vertex 24.211 -9.179 0
vertex 23.94 -8.767 4
endloop
endfacet
facet normal 0.880666 0.473738 0
outer loop
vertex 24.445 -9.614 0
vertex 24.211 -9.179 0
vertex 24.211 -9.179 4
endloop
endfacet
facet normal 0.880666 0.473738 0
outer loop
vertex 24.445 -9.614 4
vertex 24.445 -9.614 0
vertex 24.211 -9.179 4
endloop
endfacet
facet normal 0.91925 0.393674 0
outer loop
vertex 24.639 -10.067 0
vertex 24.445 -9.614 0
vertex 24.445 -9.614 4
endloop
endfacet
facet normal 0.91925 0.393674 0
outer loop
vertex 24.639 -10.067 4
vertex 24.639 -10.067 0
vertex 24.445 -9.614 4
endloop
endfacet
facet normal 0.950885 0.309544 0
outer loop
vertex 24.792 -10.537 0
vertex 24.639 -10.067 0
vertex 24.639 -10.067 4
endloop
endfacet
facet normal 0.950885 0.309544 0
outer loop
vertex 24.792 -10.537 4
vertex 24.792 -10.537 0
vertex 24.639 -10.067 4
endloop
endfacet
facet normal 0.974833 0.222935 0
outer loop
vertex 24.902 -11.018 0
vertex 24.792 -10.537 0
vertex 24.792 -10.537 4
endloop
endfacet
facet normal 0.974833 0.222935 0
outer loop
vertex 24.902 -11.018 4
vertex 24.902 -11.018 0
vertex 24.792 -10.537 4
endloop
endfacet
facet normal 0.991014 0.133757 0
outer loop
vertex 24.968 -11.507 0
vertex 24.902 -11.018 0
vertex 24.902 -11.018 4
endloop
endfacet
facet normal 0.991014 0.133757 0
outer loop
vertex 24.968 -11.507 4
vertex 24.968 -11.507 0
vertex 24.902 -11.018 4
endloop
endfacet
facet normal 0.999006 0.0445804 0
outer loop
vertex 24.99 -12 0
vertex 24.968 -11.507 0
vertex 24.968 -11.507 4
endloop
endfacet
facet normal 0.999006 0.0445804 0
outer loop
vertex 24.99 -12 4
vertex 24.99 -12 0
vertex 24.968 -11.507 4
endloop
endfacet
facet normal 0.999006 -0.0445804 0
outer loop
vertex 24.968 -12.493 4
vertex 24.968 -12.493 0
vertex 24.99 -12 0
endloop
endfacet
facet normal 0.999006 -0.0445804 0
outer loop
vertex 24.99 -12 4
vertex 24.968 -12.493 4
vertex 24.99 -12 0
endloop
endfacet
facet normal 0.991014 -0.133757 0
outer loop
vertex 24.902 -12.982 4
vertex 24.902 -12.982 0
vertex 24.968 -12.493 0
endloop
endfacet
facet normal 0.991014 -0.133757 0
outer loop
vertex 24.968 -12.493 4
vertex 24.902 -12.982 4
vertex 24.968 -12.493 0
endloop
endfacet
facet normal 0.974833 -0.222935 0
outer loop
vertex 24.792 -13.463 4
vertex 24.792 -13.463 0
vertex 24.902 -12.982 0
endloop
endfacet
facet normal 0.974833 -0.222935 0
outer loop
vertex 24.902 -12.982 4
vertex 24.792 -13.463 4
vertex 24.902 -12.982 0
endloop
endfacet
facet normal 0.950885 -0.309544 0
outer loop
vertex 24.639 -13.933 4
vertex 24.639 -13.933 0
vertex 24.792 -13.463 0
endloop
endfacet
facet normal 0.950885 -0.309544 0
outer loop
vertex 24.792 -13.463 4
vertex 24.639 -13.933 4
vertex 24.792 -13.463 0
endloop
endfacet
facet normal 0.91925 -0.393674 0
outer loop
vertex 24.445 -14.386 4
vertex 24.445 -14.386 0
vertex 24.639 -13.933 0
endloop
endfacet
facet normal 0.91925 -0.393674 0
outer loop
vertex 24.639 -13.933 4
vertex 24.445 -14.386 4
vertex 24.639 -13.933 0
endloop
endfacet
facet normal 0.880666 -0.473738 0
outer loop
vertex 24.211 -14.821 4
vertex 24.211 -14.821 0
vertex 24.445 -14.386 0
endloop
endfacet
facet normal 0.880666 -0.473738 0
outer loop
vertex 24.445 -14.386 4
vertex 24.211 -14.821 4
vertex 24.445 -14.386 0
endloop
endfacet
facet normal 0.835466 -0.549542 0
outer loop
vertex 23.94 -15.233 4
vertex 23.94 -15.233 0
vertex 24.211 -14.821 0
endloop
endfacet
facet normal 0.835466 -0.549542 0
outer loop
vertex 24.211 -14.821 4
vertex 23.94 -15.233 4
vertex 24.211 -14.821 0
endloop
endfacet
facet normal 0.781658 -0.623707 0
outer loop
vertex 23.632 -15.619 4
vertex 23.632 -15.619 0
vertex 23.94 -15.233 0
endloop
endfacet
facet normal 0.781658 -0.623707 0
outer loop
vertex 23.94 -15.233 4
vertex 23.632 -15.619 4
vertex 23.94 -15.233 0
endloop
endfacet
facet normal 0.722157 -0.691729 0
outer loop
vertex 23.291 -15.975 4
vertex 23.291 -15.975 0
vertex 23.632 -15.619 0
endloop
endfacet
facet normal 0.722157 -0.691729 0
outer loop
vertex 23.632 -15.619 4
vertex 23.291 -15.975 4
vertex 23.632 -15.619 0
endloop
endfacet
facet normal 0.657931 -0.753078 0
outer loop
vertex 22.919 -16.3 4
vertex 22.919 -16.3 0
vertex 23.291 -15.975 0
endloop
endfacet
facet normal 0.657931 -0.753078 0
outer loop
vertex 23.291 -15.975 4
vertex 22.919 -16.3 4
vertex 23.291 -15.975 0
endloop
endfacet
facet normal 0.587931 -0.808911 0
outer loop
vertex 22.52 -16.59 4
vertex 22.52 -16.59 0
vertex 22.919 -16.3 0
endloop
endfacet
facet normal 0.587931 -0.808911 0
outer loop
vertex 22.919 -16.3 4
vertex 22.52 -16.59 4
vertex 22.919 -16.3 0
endloop
endfacet
facet normal 0.512409 -0.858741 0
outer loop
vertex 22.096 -16.843 4
vertex 22.096 -16.843 0
vertex 22.52 -16.59 0
endloop
endfacet
facet normal 0.512409 -0.858741 0
outer loop
vertex 22.52 -16.59 4
vertex 22.096 -16.843 4
vertex 22.52 -16.59 0
endloop
endfacet
facet normal 0.434182 -0.900825 0
outer loop
vertex 21.652 -17.057 4
vertex 21.652 -17.057 0
vertex 22.096 -16.843 0
endloop
endfacet
facet normal 0.434182 -0.900825 0
outer loop
vertex 22.096 -16.843 4
vertex 21.652 -17.057 4
vertex 22.096 -16.843 0
endloop
endfacet
facet normal 0.352455 -0.935829 0
outer loop
vertex 21.19 -17.231 4
vertex 21.19 -17.231 0
vertex 21.652 -17.057 0
endloop
endfacet
facet normal 0.352455 -0.935829 0
outer loop
vertex 21.652 -17.057 4
vertex 21.19 -17.231 4
vertex 21.652 -17.057 0
endloop
endfacet
facet normal 0.265345 -0.964154 0
outer loop
vertex 20.714 -17.362 4
vertex 20.714 -17.362 0
vertex 21.19 -17.231 0
endloop
endfacet
facet normal 0.265345 -0.964154 0
outer loop
vertex 21.19 -17.231 4
vertex 20.714 -17.362 4
vertex 21.19 -17.231 0
endloop
endfacet
facet normal 0.178173 -0.983999 0
outer loop
vertex 20.228 -17.45 4
vertex 20.228 -17.45 0
vertex 20.714 -17.362 0
endloop
endfacet
facet normal 0.178173 -0.983999 0
outer loop
vertex 20.714 -17.362 4
vertex 20.228 -17.45 4
vertex 20.714 -17.362 0
endloop
endfacet
facet normal 0.0892554 -0.996009 0
outer loop
vertex 19.737 -17.494 4
vertex 19.737 -17.494 0
vertex 20.228 -17.45 0
endloop
endfacet
facet normal 0.0892554 -0.996009 0
outer loop
vertex 20.228 -17.45 4
vertex 19.737 -17.494 4
vertex 20.228 -17.45 0
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 19.49 -17.494 4
vertex 19.49 -17.494 0
vertex 19.737 -17.494 0
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 19.737 -17.494 4
vertex 19.49 -17.494 4
vertex 19.737 -17.494 0
endloop
endfacet
facet normal 0.993759 0.111544 0
outer loop
vertex 15.345 -12.49 0
vertex 15.29 -12 0
vertex 15.29 -12 4
endloop
endfacet
facet normal 0.993759 0.111544 0
outer loop
vertex 15.345 -12.49 4
vertex 15.345 -12.49 0
vertex 15.29 -12 4
endloop
endfacet
facet normal 0.9437 0.330802 0
outer loop
vertex 15.508 -12.955 0
vertex 15.345 -12.49 0
vertex 15.345 -12.49 4
endloop
endfacet
facet normal 0.9437 0.330802 0
outer loop
vertex 15.508 -12.955 4
vertex 15.508 -12.955 0
vertex 15.345 -12.49 4
endloop
endfacet
facet normal 0.846741 0.532005 0
outer loop
vertex 15.77 -13.372 0
vertex 15.508 -12.955 0
vertex 15.508 -12.955 4
endloop
endfacet
facet normal 0.846741 0.532005 0
outer loop
vertex 15.77 -13.372 4
vertex 15.77 -13.372 0
vertex 15.508 -12.955 4
endloop
endfacet
facet normal 0.707107 0.707107 0
outer loop
vertex 15.77 -13.372 0
vertex 15.77 -13.372 4
vertex 16.118 -13.72 0
endloop
endfacet
facet normal 0.707107 0.707107 0
outer loop
vertex 16.118 -13.72 0
vertex 15.77 -13.372 4
vertex 16.118 -13.72 4
endloop
endfacet
facet normal 0.532005 0.846741 0
outer loop
vertex 16.118 -13.72 0
vertex 16.118 -13.72 4
vertex 16.535 -13.982 0
endloop
endfacet
facet normal 0.532005 0.846741 0
outer loop
vertex 16.535 -13.982 0
vertex 16.118 -13.72 4
vertex 16.535 -13.982 4
endloop
endfacet
facet normal 0.330802 0.9437 0
outer loop
vertex 16.535 -13.982 0
vertex 16.535 -13.982 4
vertex 17 -14.145 0
endloop
endfacet
facet normal 0.330802 0.9437 0
outer loop
vertex 17 -14.145 0
vertex 16.535 -13.982 4
vertex 17 -14.145 4
endloop
endfacet
facet normal 0.111544 0.993759 0
outer loop
vertex 17 -14.145 0
vertex 17 -14.145 4
vertex 17.49 -14.2 0
endloop
endfacet
facet normal 0.111544 0.993759 0
outer loop
vertex 17.49 -14.2 0
vertex 17 -14.145 4
vertex 17.49 -14.2 4
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 17.49 -14.2 0
vertex 17.49 -14.2 4
vertex 19.49 -14.2 0
endloop
endfacet
facet normal 0 1 0
outer loop
vertex 19.49 -14.2 0
vertex 17.49 -14.2 4
vertex 19.49 -14.2 4
endloop
endfacet
facet normal -0.111544 0.993759 0
outer loop
vertex 19.49 -14.2 0
vertex 19.49 -14.2 4
vertex 19.98 -14.145 0
endloop
endfacet
facet normal -0.111544 0.993759 0
outer loop
vertex 19.98 -14.145 0
vertex 19.49 -14.2 4
vertex 19.98 -14.145 4
endloop
endfacet
facet normal -0.330802 0.9437 0
outer loop
vertex 19.98 -14.145 0
vertex 19.98 -14.145 4
vertex 20.445 -13.982 0
endloop
endfacet
facet normal -0.330802 0.9437 0
outer loop
vertex 20.445 -13.982 0
vertex 19.98 -14.145 4
vertex 20.445 -13.982 4
endloop
endfacet
facet normal -0.532005 0.846741 0
outer loop
vertex 20.445 -13.982 0
vertex 20.445 -13.982 4
vertex 20.862 -13.72 0
endloop
endfacet
facet normal -0.532005 0.846741 0
outer loop
vertex 20.862 -13.72 0
vertex 20.445 -13.982 4
vertex 20.862 -13.72 4
endloop
endfacet
facet normal -0.707107 0.707107 0
outer loop
vertex 20.862 -13.72 0
vertex 20.862 -13.72 4
vertex 21.21 -13.372 0
endloop
endfacet
facet normal -0.707107 0.707107 0
outer loop
vertex 21.21 -13.372 0
vertex 20.862 -13.72 4
vertex 21.21 -13.372 4
endloop
endfacet
facet normal -0.846741 0.532005 0
outer loop
vertex 21.21 -13.372 0
vertex 21.21 -13.372 4
vertex 21.472 -12.955 0
endloop
endfacet
facet normal -0.846741 0.532005 0
outer loop
vertex 21.472 -12.955 0
vertex 21.21 -13.372 4
vertex 21.472 -12.955 4
endloop
endfacet
facet normal -0.9437 0.330802 0
outer loop
vertex 21.472 -12.955 0
vertex 21.472 -12.955 4
vertex 21.635 -12.49 0
endloop
endfacet
facet normal -0.9437 0.330802 0
outer loop
vertex 21.635 -12.49 0
vertex 21.472 -12.955 4
vertex 21.635 -12.49 4
endloop
endfacet
facet normal -0.993759 0.111544 0
outer loop
vertex 21.635 -12.49 0
vertex 21.635 -12.49 4
vertex 21.69 -12 0
endloop
endfacet
facet normal -0.993759 0.111544 0
outer loop
vertex 21.69 -12 0
vertex 21.635 -12.49 4
vertex 21.69 -12 4
endloop
endfacet
facet normal -0.993759 -0.111544 0
outer loop
vertex 21.635 -11.51 0
vertex 21.69 -12 0
vertex 21.635 -11.51 4
endloop
endfacet
facet normal -0.993759 -0.111544 0
outer loop
vertex 21.635 -11.51 4
vertex 21.69 -12 0
vertex 21.69 -12 4
endloop
endfacet
facet normal -0.9437 -0.330802 0
outer loop
vertex 21.472 -11.045 0
vertex 21.635 -11.51 0
vertex 21.472 -11.045 4
endloop
endfacet
facet normal -0.9437 -0.330802 0
outer loop
vertex 21.472 -11.045 4
vertex 21.635 -11.51 0
vertex 21.635 -11.51 4
endloop
endfacet
facet normal -0.846741 -0.532005 0
outer loop
vertex 21.21 -10.628 0
vertex 21.472 -11.045 0
vertex 21.21 -10.628 4
endloop
endfacet
facet normal -0.846741 -0.532005 0
outer loop
vertex 21.21 -10.628 4
vertex 21.472 -11.045 0
vertex 21.472 -11.045 4
endloop
endfacet
facet normal -0.707107 -0.707107 0
outer loop
vertex 20.862 -10.28 0
vertex 21.21 -10.628 0
vertex 20.862 -10.28 4
endloop
endfacet
facet normal -0.707107 -0.707107 0
outer loop
vertex 20.862 -10.28 4
vertex 21.21 -10.628 0
vertex 21.21 -10.628 4
endloop
endfacet
facet normal -0.532005 -0.846741 0
outer loop
vertex 20.445 -10.018 4
vertex 20.445 -10.018 0
vertex 20.862 -10.28 0
endloop
endfacet
facet normal -0.532005 -0.846741 0
outer loop
vertex 20.862 -10.28 4
vertex 20.445 -10.018 4
vertex 20.862 -10.28 0
endloop
endfacet
facet normal -0.330802 -0.9437 0
outer loop
vertex 19.98 -9.855 4
vertex 19.98 -9.855 0
vertex 20.445 -10.018 0
endloop
endfacet
facet normal -0.330802 -0.9437 0
outer loop
vertex 20.445 -10.018 4
vertex 19.98 -9.855 4
vertex 20.445 -10.018 0
endloop
endfacet
facet normal -0.111544 -0.993759 0
outer loop
vertex 19.49 -9.8 4
vertex 19.49 -9.8 0
vertex 19.98 -9.855 0
endloop
endfacet
facet normal -0.111544 -0.993759 0
outer loop
vertex 19.98 -9.855 4
vertex 19.49 -9.8 4
vertex 19.98 -9.855 0
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 17.49 -9.8 4
vertex 17.49 -9.8 0
vertex 19.49 -9.8 0
endloop
endfacet
facet normal 0 -1 0
outer loop
vertex 19.49 -9.8 4
vertex 17.49 -9.8 4
vertex 19.49 -9.8 0
endloop
endfacet
facet normal 0.111544 -0.993759 0
outer loop
vertex 17 -9.855 4
vertex 17 -9.855 0
vertex 17.49 -9.8 0
endloop
endfacet
facet normal 0.111544 -0.993759 0
outer loop
vertex 17.49 -9.8 4
vertex 17 -9.855 4
vertex 17.49 -9.8 0
endloop
endfacet
facet normal 0.330802 -0.9437 0
outer loop
vertex 16.535 -10.018 4
vertex 16.535 -10.018 0
vertex 17 -9.855 0
endloop
endfacet
facet normal 0.330802 -0.9437 0
outer loop
vertex 17 -9.855 4
vertex 16.535 -10.018 4
vertex 17 -9.855 0
endloop
endfacet
facet normal 0.532005 -0.846741 0
outer loop
vertex 16.118 -10.28 4
vertex 16.118 -10.28 0
vertex 16.535 -10.018 0
endloop
endfacet
facet normal 0.532005 -0.846741 0
outer loop
vertex 16.535 -10.018 4
vertex 16.118 -10.28 4
vertex 16.535 -10.018 0
endloop
endfacet
facet normal 0.707107 -0.707107 0
outer loop
vertex 15.77 -10.628 4
vertex 15.77 -10.628 0
vertex 16.118 -10.28 0
endloop
endfacet
facet normal 0.707107 -0.707107 0
outer loop
vertex 16.118 -10.28 4
vertex 15.77 -10.628 4
vertex 16.118 -10.28 0
endloop
endfacet
facet normal 0.846741 -0.532005 0
outer loop
vertex 15.508 -11.045 4
vertex 15.508 -11.045 0
vertex 15.77 -10.628 0
endloop
endfacet
facet normal 0.846741 -0.532005 0
outer loop
vertex 15.77 -10.628 4
vertex 15.508 -11.045 4
vertex 15.77 -10.628 0
endloop
endfacet
facet normal 0.9437 -0.330802 0
outer loop
vertex 15.345 -11.51 4
vertex 15.345 -11.51 0
vertex 15.508 -11.045 0
endloop
endfacet
facet normal 0.9437 -0.330802 0
outer loop
vertex 15.508 -11.045 4
vertex 15.345 -11.51 4
vertex 15.508 -11.045 0
endloop
endfacet
facet normal 0.993759 -0.111544 0
outer loop
vertex 15.29 -12 4
vertex 15.29 -12 0
vertex 15.345 -11.51 0
endloop
endfacet
facet normal 0.993759 -0.111544 0
outer loop
vertex 15.345 -11.51 4
vertex 15.29 -12 4
vertex 15.345 -11.51 0
endloop
endfacet
facet normal -0.608761 1.7616e-016 0.793353
outer loop
vertex 6.10648 8.75 9.52258
vertex 6.10648 14.7 9.52258
vertex 5.44898 14.7 9.01806
endloop
endfacet
facet normal -0.608761 1.7616e-016 0.793353
outer loop
vertex 5.44898 8.75 9.01806
vertex 6.10648 8.75 9.52258
vertex 5.44898 14.7 9.01806
endloop
endfacet
facet normal -0.5373 1.8727e-016 0.843391
outer loop
vertex 5.44898 8.75 9.01806
vertex 5.44898 14.7 9.01806
vertex 4.75 14.7 8.57276
endloop
endfacet
facet normal -0.5373 1.8727e-016 0.843391
outer loop
vertex 4.75 8.75 8.57276
vertex 5.44898 8.75 9.01806
vertex 4.75 14.7 8.57276
endloop
endfacet
facet normal -0.461749 1.96956e-016 0.887011
outer loop
vertex 4.75 8.75 8.57276
vertex 4.75 14.7 8.57276
vertex 4.01487 14.7 8.19008
endloop
endfacet
facet normal -0.461749 1.96956e-016 0.887011
outer loop
vertex 4.01487 8.75 8.19008
vertex 4.75 8.75 8.57276
vertex 4.01487 14.7 8.19008
endloop
endfacet
facet normal -0.382684 2.05142e-016 0.923879
outer loop
vertex 4.01487 8.75 8.19008
vertex 4.01487 14.7 8.19008
vertex 3.24919 14.7 7.87292
endloop
endfacet
facet normal -0.382684 2.05142e-016 0.923879
outer loop
vertex 3.24919 8.75 7.87292
vertex 4.01487 8.75 8.19008
vertex 3.24919 14.7 7.87292
endloop
endfacet
facet normal -0.300705 2.11768e-016 0.953717
outer loop
vertex 3.24919 8.75 7.87292
vertex 3.24919 14.7 7.87292
vertex 2.45878 14.7 7.6237
endloop
endfacet
facet normal -0.300705 2.11768e-016 0.953717
outer loop
vertex 2.45878 8.75 7.6237
vertex 3.24919 8.75 7.87292
vertex 2.45878 14.7 7.6237
endloop
endfacet
facet normal -0.21644 2.16781e-016 0.976296
outer loop
vertex 2.45878 8.75 7.6237
vertex 2.45878 14.7 7.6237
vertex 1.64966 14.7 7.44433
endloop
endfacet
facet normal -0.21644 2.16781e-016 0.976296
outer loop
vertex 1.64966 8.75 7.44433
vertex 2.45878 8.75 7.6237
vertex 1.64966 14.7 7.44433
endloop
endfacet
facet normal -0.130526 2.20145e-016 0.991445
outer loop
vertex 1.64966 8.75 7.44433
vertex 1.64966 14.7 7.44433
vertex 0.82798 14.7 7.33615
endloop
endfacet
facet normal -0.130526 2.20145e-016 0.991445
outer loop
vertex 0.82798 8.75 7.33615
vertex 1.64966 8.75 7.44433
vertex 0.82798 14.7 7.33615
endloop
endfacet
facet normal -0.0436189 2.21833e-016 0.999048
outer loop
vertex 0.82798 8.75 7.33615
vertex 0.82798 14.7 7.33615
vertex 0 14.7 7.3
endloop
endfacet
facet normal -0.0436189 2.21833e-016 0.999048
outer loop
vertex 0 8.75 7.3
vertex 0.82798 8.75 7.33615
vertex 0 14.7 7.3
endloop
endfacet
facet normal 0.0436189 2.21833e-016 0.999048
outer loop
vertex 0 8.75 7.3
vertex 0 14.7 7.3
vertex -0.82798 14.7 7.33615
endloop
endfacet
facet normal 0.0436189 2.21833e-016 0.999048
outer loop
vertex -0.82798 8.75 7.33615
vertex 0 8.75 7.3
vertex -0.82798 14.7 7.33615
endloop
endfacet
facet normal 0.130526 2.20145e-016 0.991445
outer loop
vertex -0.82798 8.75 7.33615
vertex -0.82798 14.7 7.33615
vertex -1.64966 14.7 7.44433
endloop
endfacet
facet normal 0.130526 2.20145e-016 0.991445
outer loop
vertex -1.64966 8.75 7.44433
vertex -0.82798 8.75 7.33615
vertex -1.64966 14.7 7.44433
endloop
endfacet
facet normal 0.21644 2.16781e-016 0.976296
outer loop
vertex -1.64966 8.75 7.44433
vertex -1.64966 14.7 7.44433
vertex -2.45878 14.7 7.6237
endloop
endfacet
facet normal 0.21644 2.16781e-016 0.976296
outer loop
vertex -2.45878 8.75 7.6237
vertex -1.64966 8.75 7.44433
vertex -2.45878 14.7 7.6237
endloop
endfacet
facet normal 0.300705 2.11768e-016 0.953717
outer loop
vertex -2.45878 8.75 7.6237
vertex -2.45878 14.7 7.6237
vertex -3.24919 14.7 7.87292
endloop
endfacet
facet normal 0.300705 2.11768e-016 0.953717
outer loop
vertex -3.24919 8.75 7.87292
vertex -2.45878 8.75 7.6237
vertex -3.24919 14.7 7.87292
endloop
endfacet
facet normal 0.382684 2.05142e-016 0.923879
outer loop
vertex -3.24919 8.75 7.87292
vertex -3.24919 14.7 7.87292
vertex -4.01487 14.7 8.19008
endloop
endfacet
facet normal 0.382684 2.05142e-016 0.923879
outer loop
vertex -4.01487 8.75 8.19008
vertex -3.24919 8.75 7.87292
vertex -4.01487 14.7 8.19008
endloop
endfacet
facet normal 0.461749 1.96956e-016 0.887011
outer loop
vertex -4.01487 8.75 8.19008
vertex -4.01487 14.7 8.19008
vertex -4.75 14.7 8.57276
endloop
endfacet
facet normal 0.461749 1.96956e-016 0.887011
outer loop
vertex -4.75 8.75 8.57276
vertex -4.01487 8.75 8.19008
vertex -4.75 14.7 8.57276
endloop
endfacet
facet normal 0.5373 1.8727e-016 0.843391
outer loop
vertex -4.75 8.75 8.57276
vertex -4.75 14.7 8.57276
vertex -5.44898 14.7 9.01806
endloop
endfacet
facet normal 0.5373 1.8727e-016 0.843391
outer loop
vertex -5.44898 8.75 9.01806
vertex -4.75 8.75 8.57276
vertex -5.44898 14.7 9.01806
endloop
endfacet
facet normal 0.608761 1.7616e-016 0.793353
outer loop
vertex -5.44898 8.75 9.01806
vertex -5.44898 14.7 9.01806
vertex -6.10648 14.7 9.52258
endloop
endfacet
facet normal 0.608761 1.7616e-016 0.793353
outer loop
vertex -6.10648 8.75 9.52258
vertex -5.44898 8.75 9.01806
vertex -6.10648 14.7 9.52258
endloop
endfacet
facet normal 0.991445 2.89825e-017 0.130526
outer loop
vertex -9.84808 -8.75 15.0635
vertex -9.84808 8.75 15.0635
vertex -9.96195 8.75 15.9284
endloop
endfacet
facet normal 0.991445 2.89825e-017 0.130526
outer loop
vertex -9.96195 -8.75 15.9284
vertex -9.84808 -8.75 15.0635
vertex -9.96195 8.75 15.9284
endloop
endfacet
facet normal 0.999048 9.68545e-018 0.0436194
outer loop
vertex -9.96195 -8.75 15.9284
vertex -9.96195 8.75 15.9284
vertex -10 8.75 16.8
endloop
endfacet
facet normal 0.999048 9.68545e-018 0.0436194
outer loop
vertex -10 -8.75 16.8
vertex -9.96195 -8.75 15.9284
vertex -10 8.75 16.8
endloop
endfacet
facet normal 0.999048 -9.68545e-018 -0.0436194
outer loop
vertex -10 8.75 16.8
vertex -9.96195 8.75 17.6716
vertex -9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0.999048 -9.68545e-018 -0.0436194
outer loop
vertex -10 -8.75 16.8
vertex -10 8.75 16.8
vertex -9.96195 -8.75 17.6716
endloop
endfacet
facet normal 0.991445 -2.89825e-017 -0.130526
outer loop
vertex -9.96195 8.75 17.6716
vertex -9.84808 8.75 18.5365
vertex -9.84808 -8.75 18.5365
endloop
endfacet
facet normal 0.991445 -2.89825e-017 -0.130526
outer loop
vertex -9.96195 -8.75 17.6716
vertex -9.96195 8.75 17.6716
vertex -9.84808 -8.75 18.5365
endloop
endfacet
facet normal 0.976296 -4.80595e-017 -0.216441
outer loop
vertex -9.84808 8.75 18.5365
vertex -9.65926 8.75 19.3882
vertex -9.65926 -8.75 19.3882
endloop
endfacet
facet normal 0.976296 -4.80595e-017 -0.216441
outer loop
vertex -9.84808 -8.75 18.5365
vertex -9.84808 8.75 18.5365
vertex -9.65926 -8.75 19.3882
endloop
endfacet
facet normal -0.976296 -4.80595e-017 -0.216441
outer loop
vertex 9.84808 8.75 18.5365
vertex 9.84808 -8.75 18.5365
vertex 9.65926 8.75 19.3882
endloop
endfacet
facet normal -0.976296 -4.80595e-017 -0.216441
outer loop
vertex 9.65926 8.75 19.3882
vertex 9.84808 -8.75 18.5365
vertex 9.65926 -8.75 19.3882
endloop
endfacet
facet normal -0.991445 -2.89825e-017 -0.130526
outer loop
vertex 9.96195 8.75 17.6716
vertex 9.96195 -8.75 17.6716
vertex 9.84808 8.75 18.5365
endloop
endfacet
facet normal -0.991445 -2.89825e-017 -0.130526
outer loop
vertex 9.84808 8.75 18.5365
vertex 9.96195 -8.75 17.6716
vertex 9.84808 -8.75 18.5365
endloop
endfacet
facet normal -0.999048 -9.68545e-018 -0.0436194
outer loop
vertex 10 8.75 16.8
vertex 10 -8.75 16.8
vertex 9.96195 8.75 17.6716
endloop
endfacet
facet normal -0.999048 -9.68545e-018 -0.0436194
outer loop
vertex 9.96195 8.75 17.6716
vertex 10 -8.75 16.8
vertex 9.96195 -8.75 17.6716
endloop
endfacet
facet normal -0.999048 9.68545e-018 0.0436194
outer loop
vertex 10 8.75 16.8
vertex 9.96195 8.75 15.9284
vertex 10 -8.75 16.8
endloop
endfacet
facet normal -0.999048 9.68545e-018 0.0436194
outer loop
vertex 10 -8.75 16.8
vertex 9.96195 8.75 15.9284
vertex 9.96195 -8.75 15.9284
endloop
endfacet
facet normal -0.991445 2.89825e-017 0.130526
outer loop
vertex 9.96195 8.75 15.9284
vertex 9.84808 8.75 15.0635
vertex 9.96195 -8.75 15.9284
endloop
endfacet
facet normal -0.991445 2.89825e-017 0.130526
outer loop
vertex 9.96195 -8.75 15.9284
vertex 9.84808 8.75 15.0635
vertex 9.84808 -8.75 15.0635
endloop
endfacet
facet normal -0.976296 4.80595e-017 0.216441
outer loop
vertex 9.84808 8.75 15.0635
vertex 9.65926 8.75 14.2118
vertex 9.84808 -8.75 15.0635
endloop
endfacet
facet normal -0.976296 4.80595e-017 0.216441
outer loop
vertex 9.84808 -8.75 15.0635
vertex 9.65926 8.75 14.2118
vertex 9.65926 -8.75 14.2118
endloop
endfacet
facet normal -0.953717 6.67701e-017 0.300706
outer loop
vertex 9.65926 8.75 14.2118
vertex 9.39693 8.75 13.3798
vertex 9.65926 -8.75 14.2118
endloop
endfacet
facet normal -0.953717 6.67701e-017 0.300706
outer loop
vertex 9.65926 -8.75 14.2118
vertex 9.39693 8.75 13.3798
vertex 9.39693 -8.75 13.3798
endloop
endfacet
facet normal -0.92388 8.49726e-017 0.382683
outer loop
vertex 9.39693 8.75 13.3798
vertex 9.06308 8.75 12.5738
vertex 9.39693 -8.75 13.3798
endloop
endfacet
facet normal -0.92388 8.49726e-017 0.382683
outer loop
vertex 9.39693 -8.75 13.3798
vertex 9.06308 8.75 12.5738
vertex 9.06308 -8.75 12.5738
endloop
endfacet
facet normal -0.887011 1.02529e-016 0.461749
outer loop
vertex 9.06308 8.75 12.5738
vertex 8.66025 8.75 11.8
vertex 9.06308 -8.75 12.5738
endloop
endfacet
facet normal -0.887011 1.02529e-016 0.461749
outer loop
vertex 9.06308 -8.75 12.5738
vertex 8.66025 8.75 11.8
vertex 8.66025 -8.75 11.8
endloop
endfacet
facet normal -0.843391 1.19305e-016 0.5373
outer loop
vertex 8.66025 8.75 11.8
vertex 8.19152 8.75 11.0642
vertex 8.66025 -8.75 11.8
endloop
endfacet
facet normal -0.843391 1.19305e-016 0.5373
outer loop
vertex 8.66025 -8.75 11.8
vertex 8.19152 8.75 11.0642
vertex 8.19152 -8.75 11.0642
endloop
endfacet
facet normal -0.793353 1.35172e-016 0.608761
outer loop
vertex 8.19152 8.75 11.0642
vertex 7.66044 8.75 10.3721
vertex 8.19152 -8.75 11.0642
endloop
endfacet
facet normal -0.793353 1.35172e-016 0.608761
outer loop
vertex 8.19152 -8.75 11.0642
vertex 7.66044 8.75 10.3721
vertex 7.66044 -8.75 10.3721
endloop
endfacet
facet normal -0.737278 1.50011e-016 0.67559
outer loop
vertex 7.66044 8.75 10.3721
vertex 7.07107 8.75 9.72893
vertex 7.66044 -8.75 10.3721
endloop
endfacet
facet normal -0.737278 1.50011e-016 0.67559
outer loop
vertex 7.66044 -8.75 10.3721
vertex 7.07107 8.75 9.72893
vertex 7.07107 -8.75 9.72893
endloop
endfacet
facet normal -0.67559 1.63709e-016 0.737278
outer loop
vertex 7.07107 -8.75 9.72893
vertex 7.07107 8.75 9.72893
vertex 6.42788 8.75 9.13956
endloop
endfacet
facet normal -0.67559 1.63709e-016 0.737278
outer loop
vertex 6.42788 -8.75 9.13956
vertex 7.07107 -8.75 9.72893
vertex 6.42788 8.75 9.13956
endloop
endfacet
facet normal -0.608761 1.7616e-016 0.793353
outer loop
vertex 6.42788 -8.75 9.13956
vertex 6.42788 8.75 9.13956
vertex 5.73576 8.75 8.60848
endloop
endfacet
facet normal -0.608761 1.7616e-016 0.793353
outer loop
vertex 5.73576 -8.75 8.60848
vertex 6.42788 -8.75 9.13956
vertex 5.73576 8.75 8.60848
endloop
endfacet
facet normal -0.5373 1.8727e-016 0.843391
outer loop
vertex 5.73576 -8.75 8.60848
vertex 5.73576 8.75 8.60848
vertex 5 8.75 8.13975
endloop
endfacet
facet normal -0.5373 1.8727e-016 0.843391
outer loop
vertex 5 -8.75 8.13975
vertex 5.73576 -8.75 8.60848
vertex 5 8.75 8.13975
endloop
endfacet
facet normal -0.461749 1.96956e-016 0.887011
outer loop
vertex 5 -8.75 8.13975
vertex 5 8.75 8.13975
vertex 4.22618 8.75 7.73692
endloop
endfacet
facet normal -0.461749 1.96956e-016 0.887011
outer loop
vertex 4.22618 -8.75 7.73692
vertex 5 -8.75 8.13975
vertex 4.22618 8.75 7.73692
endloop
endfacet
facet normal -0.382683 2.05143e-016 0.92388
outer loop
vertex 4.22618 -8.75 7.73692
vertex 4.22618 8.75 7.73692
vertex 3.4202 8.75 7.40307
endloop
endfacet
facet normal -0.382683 2.05143e-016 0.92388
outer loop
vertex 3.4202 -8.75 7.40307
vertex 4.22618 -8.75 7.73692
vertex 3.4202 8.75 7.40307
endloop
endfacet
facet normal -0.300706 2.11768e-016 0.953717
outer loop
vertex 3.4202 -8.75 7.40307
vertex 3.4202 8.75 7.40307
vertex 2.58819 8.75 7.14074
endloop
endfacet
facet normal -0.300706 2.11768e-016 0.953717
outer loop
vertex 2.58819 -8.75 7.14074
vertex 3.4202 -8.75 7.40307
vertex 2.58819 8.75 7.14074
endloop
endfacet
facet normal -0.216441 2.16781e-016 0.976296
outer loop
vertex 2.58819 -8.75 7.14074
vertex 2.58819 8.75 7.14074
vertex 1.73648 8.75 6.95192
endloop
endfacet
facet normal -0.216441 2.16781e-016 0.976296
outer loop
vertex 1.73648 -8.75 6.95192
vertex 2.58819 -8.75 7.14074
vertex 1.73648 8.75 6.95192
endloop
endfacet
facet normal -0.130526 2.20145e-016 0.991445
outer loop
vertex 1.73648 -8.75 6.95192
vertex 1.73648 8.75 6.95192
vertex 0.871557 8.75 6.83805
endloop
endfacet
facet normal -0.130526 2.20145e-016 0.991445
outer loop
vertex 0.871557 -8.75 6.83805
vertex 1.73648 -8.75 6.95192
vertex 0.871557 8.75 6.83805
endloop
endfacet
facet normal -0.0436194 2.21833e-016 0.999048
outer loop
vertex 0.871557 -8.75 6.83805
vertex 0.871557 8.75 6.83805
vertex 0 8.75 6.8
endloop
endfacet
facet normal -0.0436194 2.21833e-016 0.999048
outer loop
vertex 0 -8.75 6.8
vertex 0.871557 -8.75 6.83805
vertex 0 8.75 6.8
endloop
endfacet
facet normal 0.0436194 2.21833e-016 0.999048
outer loop
vertex 0 -8.75 6.8
vertex 0 8.75 6.8
vertex -0.871557 8.75 6.83805
endloop
endfacet
facet normal 0.0436194 2.21833e-016 0.999048
outer loop
vertex -0.871557 -8.75 6.83805
vertex 0 -8.75 6.8
vertex -0.871557 8.75 6.83805
endloop
endfacet
facet normal 0.130526 2.20145e-016 0.991445
outer loop
vertex -0.871557 -8.75 6.83805
vertex -0.871557 8.75 6.83805
vertex -1.73648 8.75 6.95192
endloop
endfacet
facet normal 0.130526 2.20145e-016 0.991445
outer loop
vertex -1.73648 -8.75 6.95192
vertex -0.871557 -8.75 6.83805
vertex -1.73648 8.75 6.95192
endloop
endfacet
facet normal 0.216441 2.16781e-016 0.976296
outer loop
vertex -1.73648 -8.75 6.95192
vertex -1.73648 8.75 6.95192
vertex -2.58819 8.75 7.14074
endloop
endfacet
facet normal 0.216441 2.16781e-016 0.976296
outer loop
vertex -2.58819 -8.75 7.14074
vertex -1.73648 -8.75 6.95192
vertex -2.58819 8.75 7.14074
endloop
endfacet
facet normal 0.300706 2.11768e-016 0.953717
outer loop
vertex -2.58819 -8.75 7.14074
vertex -2.58819 8.75 7.14074
vertex -3.4202 8.75 7.40307
endloop
endfacet
facet normal 0.300706 2.11768e-016 0.953717
outer loop
vertex -3.4202 -8.75 7.40307
vertex -2.58819 -8.75 7.14074
vertex -3.4202 8.75 7.40307
endloop
endfacet
facet normal 0.382683 2.05143e-016 0.92388
outer loop
vertex -3.4202 -8.75 7.40307
vertex -3.4202 8.75 7.40307
vertex -4.22618 8.75 7.73692
endloop
endfacet
facet normal 0.382683 2.05143e-016 0.92388
outer loop
vertex -4.22618 -8.75 7.73692
vertex -3.4202 -8.75 7.40307
vertex -4.22618 8.75 7.73692
endloop
endfacet
facet normal 0.461749 1.96956e-016 0.887011
outer loop
vertex -4.22618 -8.75 7.73692
vertex -4.22618 8.75 7.73692
vertex -5 8.75 8.13975
endloop
endfacet
facet normal 0.461749 1.96956e-016 0.887011
outer loop
vertex -5 -8.75 8.13975
vertex -4.22618 -8.75 7.73692
vertex -5 8.75 8.13975
endloop
endfacet
facet normal 0.5373 1.8727e-016 0.843391
outer loop
vertex -5 -8.75 8.13975
vertex -5 8.75 8.13975
vertex -5.73576 8.75 8.60848
endloop
endfacet
facet normal 0.5373 1.8727e-016 0.843391
outer loop
vertex -5.73576 -8.75 8.60848
vertex -5 -8.75 8.13975
vertex -5.73576 8.75 8.60848
endloop
endfacet
facet normal 0.608761 1.7616e-016 0.793353
outer loop
vertex -5.73576 -8.75 8.60848
vertex -5.73576 8.75 8.60848
vertex -6.42788 8.75 9.13956
endloop
endfacet
facet normal 0.608761 1.7616e-016 0.793353
outer loop
vertex -6.42788 -8.75 9.13956
vertex -5.73576 -8.75 8.60848
vertex -6.42788 8.75 9.13956
endloop
endfacet
facet normal 0.67559 1.63709e-016 0.737278
outer loop
vertex -6.42788 -8.75 9.13956
vertex -6.42788 8.75 9.13956
vertex -7.07107 8.75 9.72893
endloop
endfacet
facet normal 0.67559 1.63709e-016 0.737278
outer loop
vertex -7.07107 -8.75 9.72893
vertex -6.42788 -8.75 9.13956
vertex -7.07107 8.75 9.72893
endloop
endfacet
facet normal 0.737278 1.50011e-016 0.67559
outer loop
vertex -7.07107 -8.75 9.72893
vertex -7.07107 8.75 9.72893
vertex -7.66044 8.75 10.3721
endloop
endfacet
facet normal 0.737278 1.50011e-016 0.67559
outer loop
vertex -7.66044 -8.75 10.3721
vertex -7.07107 -8.75 9.72893
vertex -7.66044 8.75 10.3721
endloop
endfacet
facet normal 0.793353 1.35172e-016 0.608761
outer loop
vertex -7.66044 -8.75 10.3721
vertex -7.66044 8.75 10.3721
vertex -8.19152 8.75 11.0642
endloop
endfacet
facet normal 0.793353 1.35172e-016 0.608761
outer loop
vertex -8.19152 -8.75 11.0642
vertex -7.66044 -8.75 10.3721
vertex -8.19152 8.75 11.0642
endloop
endfacet
facet normal 0.843391 1.19305e-016 0.5373
outer loop
vertex -8.19152 -8.75 11.0642
vertex -8.19152 8.75 11.0642
vertex -8.66025 8.75 11.8
endloop
endfacet
facet normal 0.843391 1.19305e-016 0.5373
outer loop
vertex -8.66025 -8.75 11.8
vertex -8.19152 -8.75 11.0642
vertex -8.66025 8.75 11.8
endloop
endfacet
facet normal 0.887011 1.02529e-016 0.461749
outer loop
vertex -8.66025 -8.75 11.8
vertex -8.66025 8.75 11.8
vertex -9.06308 8.75 12.5738
endloop
endfacet
facet normal 0.887011 1.02529e-016 0.461749
outer loop
vertex -9.06308 -8.75 12.5738
vertex -8.66025 -8.75 11.8
vertex -9.06308 8.75 12.5738
endloop
endfacet
facet normal 0.92388 8.49726e-017 0.382683
outer loop
vertex -9.06308 -8.75 12.5738
vertex -9.06308 8.75 12.5738
vertex -9.39693 8.75 13.3798
endloop
endfacet
facet normal 0.92388 8.49726e-017 0.382683
outer loop
vertex -9.39693 -8.75 13.3798
vertex -9.06308 -8.75 12.5738
vertex -9.39693 8.75 13.3798
endloop
endfacet
facet normal 0.953717 6.67701e-017 0.300706
outer loop
vertex -9.39693 -8.75 13.3798
vertex -9.39693 8.75 13.3798
vertex -9.65926 8.75 14.2118
endloop
endfacet
facet normal 0.953717 6.67701e-017 0.300706
outer loop
vertex -9.65926 -8.75 14.2118
vertex -9.39693 -8.75 13.3798
vertex -9.65926 8.75 14.2118
endloop
endfacet
facet normal 0.976296 4.80595e-017 0.216441
outer loop
vertex -9.65926 -8.75 14.2118
vertex -9.65926 8.75 14.2118
vertex -9.84808 8.75 15.0635
endloop
endfacet
facet normal 0.976296 4.80595e-017 0.216441
outer loop
vertex -9.84808 -8.75 15.0635
vertex -9.65926 -8.75 14.2118
vertex -9.84808 8.75 15.0635
endloop
endfacet
facet normal -0.608761 1.7616e-016 0.793353
outer loop
vertex 6.10648 -14.7 9.52258
vertex 6.10648 -8.75 9.52258
vertex 5.44898 -8.75 9.01806
endloop
endfacet
facet normal -0.608761 1.7616e-016 0.793353
outer loop
vertex 5.44898 -14.7 9.01806
vertex 6.10648 -14.7 9.52258
vertex 5.44898 -8.75 9.01806
endloop
endfacet
facet normal -0.5373 1.8727e-016 0.843391
outer loop
vertex 5.44898 -14.7 9.01806
vertex 5.44898 -8.75 9.01806
vertex 4.75 -8.75 8.57276
endloop
endfacet
facet normal -0.5373 1.8727e-016 0.843391
outer loop
vertex 4.75 -14.7 8.57276
vertex 5.44898 -14.7 9.01806
vertex 4.75 -8.75 8.57276
endloop
endfacet
facet normal -0.461749 1.96956e-016 0.887011
outer loop
vertex 4.75 -14.7 8.57276
vertex 4.75 -8.75 8.57276
vertex 4.01487 -8.75 8.19008
endloop
endfacet
facet normal -0.461749 1.96956e-016 0.887011
outer loop
vertex 4.01487 -14.7 8.19008
vertex 4.75 -14.7 8.57276
vertex 4.01487 -8.75 8.19008
endloop
endfacet
facet normal -0.382684 2.05142e-016 0.923879
outer loop
vertex 4.01487 -14.7 8.19008
vertex 4.01487 -8.75 8.19008
vertex 3.24919 -8.75 7.87292
endloop
endfacet
facet normal -0.382684 2.05142e-016 0.923879
outer loop
vertex 3.24919 -14.7 7.87292
vertex 4.01487 -14.7 8.19008
vertex 3.24919 -8.75 7.87292
endloop
endfacet
facet normal -0.300705 2.11768e-016 0.953717
outer loop
vertex 3.24919 -14.7 7.87292
vertex 3.24919 -8.75 7.87292
vertex 2.45878 -8.75 7.62371
endloop
endfacet
facet normal -0.300705 2.11768e-016 0.953717
outer loop
vertex 2.45878 -14.7 7.62371
vertex 3.24919 -14.7 7.87292
vertex 2.45878 -8.75 7.62371
endloop
endfacet
facet normal -0.21644 2.16781e-016 0.976296
outer loop
vertex 2.45878 -14.7 7.62371
vertex 2.45878 -8.75 7.62371
vertex 1.64966 -8.75 7.44433
endloop
endfacet
facet normal -0.21644 2.16781e-016 0.976296
outer loop
vertex 1.64966 -14.7 7.44433
vertex 2.45878 -14.7 7.62371
vertex 1.64966 -8.75 7.44433
endloop
endfacet
facet normal -0.130526 2.20145e-016 0.991445
outer loop
vertex 1.64966 -14.7 7.44433
vertex 1.64966 -8.75 7.44433
vertex 0.82798 -8.75 7.33615
endloop
endfacet
facet normal -0.130526 2.20145e-016 0.991445
outer loop
vertex 0.82798 -14.7 7.33615
vertex 1.64966 -14.7 7.44433
vertex 0.82798 -8.75 7.33615
endloop
endfacet
facet normal -0.0436189 2.21833e-016 0.999048
outer loop
vertex 0.82798 -14.7 7.33615
vertex 0.82798 -8.75 7.33615
vertex 0 -8.75 7.3
endloop
endfacet
facet normal -0.0436189 2.21833e-016 0.999048
outer loop
vertex 0 -14.7 7.3
vertex 0.82798 -14.7 7.33615
vertex 0 -8.75 7.3
endloop
endfacet
facet normal 0.0436189 2.21833e-016 0.999048
outer loop
vertex 0 -14.7 7.3
vertex 0 -8.75 7.3
vertex -0.82798 -8.75 7.33615
endloop
endfacet
facet normal 0.0436189 2.21833e-016 0.999048
outer loop
vertex -0.82798 -14.7 7.33615
vertex 0 -14.7 7.3
vertex -0.82798 -8.75 7.33615
endloop
endfacet
facet normal 0.130526 2.20145e-016 0.991445
outer loop
vertex -0.82798 -14.7 7.33615
vertex -0.82798 -8.75 7.33615
vertex -1.64966 -8.75 7.44433
endloop
endfacet
facet normal 0.130526 2.20145e-016 0.991445
outer loop
vertex -1.64966 -14.7 7.44433
vertex -0.82798 -14.7 7.33615
vertex -1.64966 -8.75 7.44433
endloop
endfacet
facet normal 0.21644 2.16781e-016 0.976296
outer loop
vertex -1.64966 -14.7 7.44433
vertex -1.64966 -8.75 7.44433
vertex -2.45878 -8.75 7.62371
endloop
endfacet
facet normal 0.21644 2.16781e-016 0.976296
outer loop
vertex -2.45878 -14.7 7.62371
vertex -1.64966 -14.7 7.44433
vertex -2.45878 -8.75 7.62371
endloop
endfacet
facet normal 0.300705 2.11768e-016 0.953717
outer loop
vertex -2.45878 -14.7 7.62371
vertex -2.45878 -8.75 7.62371
vertex -3.24919 -8.75 7.87292
endloop
endfacet
facet normal 0.300705 2.11768e-016 0.953717
outer loop
vertex -3.24919 -14.7 7.87292
vertex -2.45878 -14.7 7.62371
vertex -3.24919 -8.75 7.87292
endloop
endfacet
facet normal 0.382684 2.05142e-016 0.923879
outer loop
vertex -3.24919 -14.7 7.87292
vertex -3.24919 -8.75 7.87292
vertex -4.01487 -8.75 8.19008
endloop
endfacet
facet normal 0.382684 2.05142e-016 0.923879
outer loop
vertex -4.01487 -14.7 8.19008
vertex -3.24919 -14.7 7.87292
vertex -4.01487 -8.75 8.19008
endloop
endfacet
facet normal 0.461749 1.96956e-016 0.887011
outer loop
vertex -4.01487 -14.7 8.19008
vertex -4.01487 -8.75 8.19008
vertex -4.75 -8.75 8.57276
endloop
endfacet
facet normal 0.461749 1.96956e-016 0.887011
outer loop
vertex -4.75 -14.7 8.57276
vertex -4.01487 -14.7 8.19008
vertex -4.75 -8.75 8.57276
endloop
endfacet
facet normal 0.5373 1.8727e-016 0.843391
outer loop
vertex -4.75 -14.7 8.57276
vertex -4.75 -8.75 8.57276
vertex -5.44898 -8.75 9.01806
endloop
endfacet
facet normal 0.5373 1.8727e-016 0.843391
outer loop
vertex -5.44898 -14.7 9.01806
vertex -4.75 -14.7 8.57276
vertex -5.44898 -8.75 9.01806
endloop
endfacet
facet normal 0.608761 1.7616e-016 0.793353
outer loop
vertex -5.44898 -14.7 9.01806
vertex -5.44898 -8.75 9.01806
vertex -6.10648 -8.75 9.52258
endloop
endfacet
facet normal 0.608761 1.7616e-016 0.793353
outer loop
vertex -6.10648 -14.7 9.52258
vertex -5.44898 -14.7 9.01806
vertex -6.10648 -8.75 9.52258
endloop
endfacet
endsolid OpenSCAD_Model