diff --git a/vitamins/pcb.scad b/vitamins/pcb.scad index 2063d66..5aad53d 100644 --- a/vitamins/pcb.scad +++ b/vitamins/pcb.scad @@ -38,6 +38,7 @@ use use use use +use include function pcb_name(type) = type[1]; //! Description @@ -1088,6 +1089,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon if(show(comp, "smd_res")) smd_resistor(comp[4], comp[5]); if(show(comp, "smd_cap")) smd_capacitor(comp[4], comp[5]); if(show(comp, "vero_pin")) vero_pin(param(4, false)); + if(show(comp, "terminal")) terminal_block(comp[5], comp[4]); } } } diff --git a/vitamins/pcbs.scad b/vitamins/pcbs.scad index bd0174c..f95ed1c 100644 --- a/vitamins/pcbs.scad +++ b/vitamins/pcbs.scad @@ -198,6 +198,34 @@ Duex5 = ["Duex5", "Duex5 expansion board", ]), []]; +BTT_RELAY_V1_2 = [ + "BTT_RELAY_V1_2", "BigTreeTech Relay Module v1.2", + 80.4, 36.3, 1.5, // size + 1, // corner radius + 3, // mounting hole diameter + 5, // pad around mounting hole + grey(25), // color + false, // true if parts should be separate BOM items + [ // hole positions + [3, 3.5], [-3, 3.5], [3, -3.5], [-3, -3.5] + ], + [ // components + [ 44.5, 10.0, 0, "block", 25, 20, 15.8, grey(20) ], + [ 47.5, -7.6, 0, "block", 19, 15.25, 15.8, "SkyBlue" ], + //[ -14.5, 18.15, 0, "block", 16, 30, 17.0, grey(25) ], + //[ -14.5, 18.15, 0, "block", 15, 25.5, 17.1, "PaleGoldenrod" ], + [ 2.5, 10.65, 270, "jst_xh", 2, false, grey(20), ], + [ 2.5, 18.15, 270, "jst_xh", 2, false, grey(20), ], + [ 2.5, 25.65, 270, "jst_xh", 2, false, grey(20), ], + [ 11.0, 2.0, 0, "2p54header", 2, 1 ], + [ 23.0, 2.0, 0, "2p54header", 4, 1 ], + [ 7.9, -3.3, 90, "2p54header", 2, 1 ], + [ -6.5, 2.45, 180, "terminal", 3, [10, 1.33, 13.2, 16, 7, 13] ], + ], + [], // accessories + [], // grid +]; + BTT_SKR_MINI_E3_V2_0 = [ "BTT_SKR_MINI_E3_V2_0", "BigTreeTech SKR Mini E3 v2.0", 100.75, 70.25, 1.6, // size @@ -882,7 +910,7 @@ KY_040 = ["KY_040", "KY-040 rotart encoder breakout", tiny_pcbs = [XIAO, MP1584EN, TP4056, ESP_01, LIPO_fuel_gauge]; -pcbs = [RAMPSEndstop, KY_040, MT3608, ZC_A0591, ArduinoNano, RPI_Pico, ESP32_DOIT_V1, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, RPI3, RPI4, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5]; +pcbs = [RAMPSEndstop, KY_040, MT3608, ZC_A0591, ArduinoNano, RPI_Pico, ESP32_DOIT_V1, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, RPI3, RPI4, BTT_RELAY_V1_2, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5]; pcbs_not_shown = [Melzi, Duex2, PSU12V1A, Keyes5p1, PI_IO, ExtruderPCB]; diff --git a/vitamins/psu.scad b/vitamins/psu.scad index 9a58a08..c70bec1 100644 --- a/vitamins/psu.scad +++ b/vitamins/psu.scad @@ -30,6 +30,7 @@ use <../utils/round.scad> use use use +use function psu_face_holes(type) = type[0]; //! List of screw hole positions function psu_face_thickness(type) = type[1]; //! The thickness @@ -55,65 +56,6 @@ function psu_terminals(type) = type[10]; //! How many terminals and t function psu_faces(type) = type[11]; //! List of face descriptions function psu_accessories(type) = type[12]; //! Accessories to add to BOM, e.g. mains lead -function terminal_block_pitch(type) = type[0]; //! Pitch between screws -function terminal_block_divider(type) = type[1]; //! Width of the dividers -function terminal_block_height(type) = type[2]; //! Height of the dividers -function terminal_block_depth(type) = type[3]; //! Total depth -function terminal_block_height2(type) = type[4]; //! Height under the contacts -function terminal_block_depth2(type) = type[5]; //! Depth of contact well - -function terminal_block_length(type, ways) = terminal_block_pitch(type) * ways + terminal_block_divider(type); //! Total length of terminal block - -module terminal_block(type, ways) { //! Draw a power supply terminal block - tl = terminal_block_length(type, ways); - depth = terminal_block_depth(type); - depth2 = terminal_block_depth2(type); - div = terminal_block_divider(type); - h = terminal_block_height(type); - h2 = terminal_block_height2(type); - pitch = terminal_block_pitch(type); - back_wall = depth - depth2; - contact_depth = depth2 - back_wall; - contact_width = pitch - div; - contact_h = 0.4; - washer_t = 1.2; - translate([0, -tl]) { - color(grey(20)) { - cube([depth, tl, h2]); - - translate([depth2, 0]) - cube([depth - depth2, tl, h]); - - for(i = [0 : ways]) - translate([0, i * pitch + div]) - rotate([90, 0, 0]) - linear_extrude(div) - hull() { - r = 2; - square([depth, eps]); - - translate([depth - eps, 0]) - square([eps, h]); - - translate([r, h - r]) - circle4n(r); - } - } - color("silver") - for(i = [0 : ways - 1]) translate([0, i * pitch + div, h2]) { - translate([back_wall, 1]) - cube([contact_depth, contact_width - 2, contact_h]); - - translate([back_wall + contact_depth / 2 - contact_width / 2, 0]) - cube([contact_width, contact_width, contact_h + washer_t]); - - translate([back_wall + contact_depth / 2, contact_width / 2, contact_h + washer_t]) - not_on_bom() no_explode() - screw(M3_pan_screw, 8); - } - } -} - function psu_face_transform(type, face) = //! Returns a transformation matrix to get to the specified face let(l = psu_length(type), w = psu_width(type), diff --git a/vitamins/terminal.scad b/vitamins/terminal.scad new file mode 100644 index 0000000..b762dca --- /dev/null +++ b/vitamins/terminal.scad @@ -0,0 +1,79 @@ +// +// NopSCADlib Copyright Chris Palmer 2018 +// nop.head@gmail.com +// hydraraptor.blogspot.com +// +// This file is part of NopSCADlib. +// +// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the +// GNU General Public License as published by the Free Software Foundation, either version 3 of +// the License, or (at your option) any later version. +// +// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; +// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +// See the GNU General Public License for more details. +// +// You should have received a copy of the GNU General Public License along with NopSCADlib. +// If not, see . +// + +include <../core.scad> + +function terminal_block_pitch(type) = type[0]; //! Pitch between screws +function terminal_block_divider(type) = type[1]; //! Width of the dividers +function terminal_block_height(type) = type[2]; //! Height of the dividers +function terminal_block_depth(type) = type[3]; //! Total depth +function terminal_block_height2(type) = type[4]; //! Height under the contacts +function terminal_block_depth2(type) = type[5]; //! Depth of contact well + +function terminal_block_length(type, ways) = terminal_block_pitch(type) * ways + terminal_block_divider(type); //! Total length of terminal block + +module terminal_block(type, ways) { //! Draw a power supply terminal block + tl = terminal_block_length(type, ways); + depth = terminal_block_depth(type); + depth2 = terminal_block_depth2(type); + div = terminal_block_divider(type); + h = terminal_block_height(type); + h2 = terminal_block_height2(type); + pitch = terminal_block_pitch(type); + back_wall = depth - depth2; + contact_depth = depth2 - back_wall; + contact_width = pitch - div; + contact_h = 0.4; + washer_t = 1.2; + translate([0, -tl]) { + color(grey(20)) { + cube([depth, tl, h2]); + + translate([depth2, 0]) + cube([depth - depth2, tl, h]); + + for(i = [0 : ways]) + translate([0, i * pitch + div]) + rotate([90, 0, 0]) + linear_extrude(div) + hull() { + r = 2; + square([depth, eps]); + + translate([depth - eps, 0]) + square([eps, h]); + + translate([r, h - r]) + circle4n(r); + } + } + color("silver") + for(i = [0 : ways - 1]) translate([0, i * pitch + div, h2]) { + translate([back_wall, 1]) + cube([contact_depth, contact_width - 2, contact_h]); + + translate([back_wall + contact_depth / 2 - contact_width / 2, 0]) + cube([contact_width, contact_width, contact_h + washer_t]); + + translate([back_wall + contact_depth / 2, contact_width / 2, contact_h + washer_t]) + not_on_bom() no_explode() + screw(M3_pan_screw, 8); + } + } +}