//
// NopSCADlib Copyright Chris Palmer 2018
// nop.head@gmail.com
// hydraraptor.blogspot.com
//
// This file is part of NopSCADlib.
//
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
// GNU General Public License as published by the Free Software Foundation, either version 3 of
// the License, or (at your option) any later version.
//
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
// See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License along with NopSCADlib.
// If not, see .
//
include
include
include
include
include
include
include
include <7_segments.scad>
include
//
// l w t r h l c b h
// e i h a o a o o o
// n d i d l n l m l
// g t c i e d o e
// t h k u u s
// h n s d d r
// e
// s
// s
//
Ethernet = ["Ethernet", "Duet Ethernet piggy back",
33.8, 37.5, 1.6, 0, 2.54, 0, "#1D39AB", false, [[27.1, -6.3], [7.5, -2.7], [21.3, -31.1]],
[[10.7, -13.1, 180, "rj45"],
[7.75, -36.2, 0, "-2p54header", 6, 1],
[7.75, -26.04, 0, "-2p54header", 6, 1],
[27.1, -6.3, 0, "-standoff", 5, 4.5, 12.5, 2.54],
[7.5, -2.70, 0, "-standoff", 5, 4.5, 12.5, 2.54],
[21.3, -31.1, 0, "-standoff", 5, 4.5, 12.5, 2.54],
],
[]];
DuetE = ["DuetE", "Duet 2 Ethernet electronics",
123, 100, 1.6, 0, 4.2, 0, "#2140BE", false, [[-4, 4], [-4, -4], [4, -4],[4, 4]],
[[ 18.5, -69.15, 0, "pcb", 5, Ethernet],
[ 42.9, -3.2, 90, "molex_hdr", 4],
[ 59.8, -3.2, 90, "molex_hdr", 4],
[ 76.2, -3.2, 90, "molex_hdr", 4],
[ 92.6, -3.2, 90, "molex_hdr", 4],
[109.9, -3.2, 90, "molex_hdr", 4],
[109.9, -9.6, 90, "molex_hdr", 4],
[119.7, -31, 0, "molex_hdr", 3],
[119.7, -88.6, 0, "molex_hdr", 2],
[114.9, -75.1, 0, "gterm635", 2],
[114.9, -43.5, 0, "gterm635", 2],
[ 39, -97, -90, "molex_hdr", 4],
[ 27.9, -97, -90, "molex_hdr", 4],
[ 83.7, -38.7, -90, "molex_hdr", 3],
[ 74.3, -40.7, -90, "molex_hdr", 3],
[ 64.0, -40.7, -90, "molex_hdr", 3],
[ 54.0, -40.7, -90, "molex_hdr", 3],
[ 44.1, -40.7, -90, "molex_hdr", 3],
[ 35.0, -40.7, -90, "molex_hdr", 2],
[ 28.9, -40.7, -90, "molex_hdr", 2],
[103.0, -48.8, -90, "molex_hdr", 2],
[ 97.0, -48.8, -90, "molex_hdr", 2],
[ 90.3, -48.8, -90, "molex_hdr", 2],
[ 84.1, -48.8, -90, "molex_hdr", 2],
[ 77.9, -48.8, -90, "molex_hdr", 2],
[105.2, -54.9, 0, "2p54header", 2, 1],
[ 98.4, -54.9, 0, "2p54header", 2, 1],
[ 90.2, -54.9, 0, "2p54header", 3, 1],
[ 61.7, -83.1, 0, "2p54header", 5, 2],
[ 29.5, -3.6, 90, "gterm35", 4],
[ 45.0, -70.8, 45, "chip", 19, 19, 1.5],
[ 34.6, -18.8, 0, "chip", 10, 10, 2],
[ 53.2, -18.8, 0, "chip", 10, 10, 2],
[ 71.8, -18.8, 0, "chip", 10, 10, 2],
[ 90.4, -18.8, 0, "chip", 10, 10, 2],
[109.9, -22.0, 0, "chip", 10, 10, 2],
[105.8, -86.3, 0, "2p54boxhdr", 5, 2],
[ 85.2, -86.3, 0, "2p54boxhdr", 5, 2],
[ 79.9, -95.7, 180, "2p54boxhdr", 25, 2],
[ 2.0, -47.3, 180, "usb_uA"],
[ 8.4, -63.3, 180, "uSD", [15, 14.5, 2]],
[ 2.2, -9.7, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E1 heater
[ 2.2, -13.2, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E0 heater
[ 2.2, -16.7, 0, "chip", inch(0.03), inch(0.06), 1, "blue"], // Vin
[ 2.2, -20.2, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // 5V
[ 2.2, -24.0, 0, "chip", inch(0.03), inch(0.06), 1, "green"], // 3.3V
[ 1.8, -41.8, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // USB
[ 2.3, -53.5, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // Diag
[ 49.8, -2.0, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E1 stop
[ 52.9, -2.0, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E0 stop
[ 68.8, -2.4, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // X stop
[ 85.4, -2.4, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // Y stop
[101.6, -1.8, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // Z stop
[109.8, -58.8, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // Bed heater
[ 2.3, -37.2, 0, "chip", 3.6, 4.8, 2.0, "silver"], // Reset switch
[ 0.0, -37.2, 0, "chip", 2.0, 2.6, 1.4, grey(20)], // Reset button
],
[": Micro SD card", ": Cat 5 patch cable 300mm"]];
Duex2 = ["Duex2", "Duex2 expansion board",
123, 100, 1.6, 0, 4.2, 0, "#2140BE", false, [[-4, 4], [-4, -4], [4, -4],[4, 4]],
[ [ 79.8, -4.3, 180, "2p54boxhdr", 25, 2],
[ 27.8, -3.0, 0, "2p54header", 10, 1],
[ 45.7, -14.7, 0, "2p54header", 3, 1], // Endstop voltage select
[ 34.8, -15.1, 0, "2p54header", 3, 2], // Fan voltage select
[ 4.8, -55.2, 90, "2p54header", 1, 2], // 12V EN
[ 59.5, -30.3, 0, "2p54header", 3, 1], // 5V Aux select
[ 31.6, -41.4, 0, "2p54header", 2, 5], // SPIO
[ 4.7, -11.8, -90, "molex_hdr", 2], // Fan / LED 8
[ 4.9, -23.9, -90, "molex_hdr", 2], // Fan / LED 7
[ 12.0, -23.9, -90, "molex_hdr", 2], // Fan / LED 6
[ 19.7, -23.9, -90, "molex_hdr", 2], // Fan / LED 5
[ 27.3, -23.9, -90, "molex_hdr", 2], // Fan / LED 4
[ 34.9, -23.9, -90, "molex_hdr", 2], // Fan / LED 3
[ 44.3, -23.9, -90, "molex_hdr", 3], // E6 stop
[ 54.5, -23.9, -90, "molex_hdr", 3], // E5 stop
[ 64.6, -23.9, -90, "molex_hdr", 3], // E4 stop
[ 74.8, -23.9, -90, "molex_hdr", 3], // E3 stop
[ 84.9, -23.9, -90, "molex_hdr", 3], // E2 stop
[ 57.0, -46.8, -90, "molex_hdr", 2], // E6 temp
[ 64.6, -46.8, -90, "molex_hdr", 2], // E5 temp
[ 57.0, -36.6, -90, "molex_hdr", 2], // E4 temp
[ 64.6, -36.6, -90, "molex_hdr", 2], // E3 temp
[ 72.2, -36.6, -90, "molex_hdr", 2], // E2 temp
[ 26.5, -58.2, -90, "molex_hdr", 3], // PWM_5
[ 36.7, -58.2, -90, "molex_hdr", 3], // PWM_4
[ 46.8, -58.2, -90, "molex_hdr", 3], // PWM_3
[ 57.0, -58.2, -90, "molex_hdr", 3], // PWM_2
[ 67.2, -58.2, -90, "molex_hdr", 3], // PWM_1
[ 83.2, -18.3, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E2 stop
[ 74.5, -18.3, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E3 stop
[ 63.8, -18.7, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E4 stop
[ 54.7, -18.3, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E5 stop
[ 44.3, -18.4, 90, "chip", inch(0.03), inch(0.06), 1, "red"], // E6 stop
[112.4, -15.5, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E2 heat
[112.4, -22.9, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E3 heat
[112.4, -29.1, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E4 heat
[112.4, -36.1, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E5 heat
[112.4, -43.4, 0, "chip", inch(0.03), inch(0.06), 1, "red"], // E6 heat
[118.6, -30.3, 0, "gterm35", 10], // Heaters
[114.9, -56.5, 0, "gterm635", 2], // VIN
[119.6, -69.0, 0, "molex_hdr", 2], // 5V AUX in
[ 4.5, -49.4, 90, "molex_hdr", 2], // 12V
[110.7, -81.2, 0, "chip", 10, 10, 2],
[ 86.1, -81.2, 0, "chip", 10, 10, 2],
[109.9, -96.8, -90, "molex_hdr", 4],
[ 86.1, -96.8, -90, "molex_hdr", 4],
],
[]];
Duex5 = ["Duex5", "Duex5 expansion board",
123, 100, 1.6, 0, 4.2, 0, "#2140BE", false, [[-4, 4], [-4, -4], [4, -4],[4, 4]],
concat(Duex2[11], [
[ 61.5, -81.2, 0, "chip", 10, 10, 2],
[ 36.9, -81.2, 0, "chip", 10, 10, 2],
[ 12.3, -81.2, 0, "chip", 10, 10, 2],
[ 61.5, -96.4, -90, "molex_hdr", 4],
[ 36.9, -96.4, -90, "molex_hdr", 4],
[ 14.3, -96.4, -90, "molex_hdr", 4],
]),
[]];
BTT_RELAY_V1_2 = [
"BTT_RELAY_V1_2", "BigTreeTech Relay Module v1.2",
80.4, 36.3, 1.5, // size
1, // corner radius
3, // mounting hole diameter
5, // pad around mounting hole
grey(25), // color
false, // true if parts should be separate BOM items
[ // hole positions
[3, 3.5], [-3, 3.5], [3, -3.5], [-3, -3.5]
],
[ // components
[ 44.5, 10.0, 0, "block", 25, 20, 15.8, grey(20) ],
[ 47.5, -7.6, 0, "block", 19, 15.25, 15.8, "SkyBlue" ],
//[ -14.5, 18.15, 0, "block", 16, 30, 17.0, grey(25) ],
//[ -14.5, 18.15, 0, "block", 15, 25.5, 17.1, "PaleGoldenrod" ],
[ 2.5, 10.65, 270, "jst_xh", 2, false, grey(20), ],
[ 2.5, 18.15, 270, "jst_xh", 2, false, grey(20), ],
[ 2.5, 25.65, 270, "jst_xh", 2, false, grey(20), ],
[ 11.0, 2.0, 0, "2p54header", 2, 1 ],
[ 23.0, 2.0, 0, "2p54header", 4, 1 ],
[ 7.9, -3.3, 90, "2p54header", 2, 1 ],
[ -6.5, 2.45, 180, "terminal", 3, [10, 1.33, 13.2, 16, 7, 13] ],
],
[], // accessories
[], // grid
];
BTT_SKR_MINI_E3_V2_0 = [
"BTT_SKR_MINI_E3_V2_0", "BigTreeTech SKR Mini E3 v2.0",
100.75, 70.25, 1.6, // size
1, // corner radius
3, // mounting hole diameter
5, // pad around mounting hole
grey(30), // color
false, // true if parts should be separate BOM items
[ // hole positions
for (i = [ [0, 0], [62.15, 0] ])
(i + [20.3, -2.89]),
for (i = [ [0, -34.98], [31.80, -37.63], [95.68, -64.47] ])
(i + [2.535, -2.89])
],
[ // components
// cpu
[ 55, 33, 0, "chip", 10, 10, 1, grey(15) ],
// driver chips
for (x = [10.5, 30.5, 50.5, 70.5])
[ x, -17.5, 0, "chip", 5, 5, 1, grey(15) ],
// mock up heat sinks over the chips
for (x = [10.5, 30.5, 50.5, 70.5])
[ x, -17.5, 0, "block", 9, 8.5, 2, "DeepSkyBlue" ],
for(x = [10.5, 30.5, 50.5, 70.5], y = [-4,-2,0,2,4])
[ x, -17.5 + y, 0, "block", 9, 0.75, 11, "DeepSkyBlue" ],
// heat dissipation for drivers under board
[ 43, -17.5, 0, "-block", 85, 8, 0.1, gold ],
// heated bed
[ 26, 16, 0, "chip", 9.5, 8.5, 4, grey(15) ],
[ 27, 19, 0, "-block", 13, 14, 0.1, gold ],
// hotend
[ 37, 14, 0, "chip", 6, 6, 2.5, grey(15) ],
[ 40, 16, 0, "-block", 10, 8, 0.1, gold ],
// voltage regulator heat dissipation
[ 12, 28.5, 0, "-block", 11, 7, 0.1, gold ],
// terminals
[ 5.25, 5.3, 180, "gterm", gt_5x17, 2, undef, grey(20) ],
[ 18.1, 5.1, -90, "gterm", gt_5x17, 2, undef, grey(20) ],
[ 29.3, 5.1, -90, "gterm", gt_5x17, 2, undef, grey(20) ],
[ 40.5, 5.1, -90, "gterm", gt_5x11, 2, undef, grey(20) ],
// SD and USB
[ -3, -(22.27 + 29.92)/2, 0, "usb_uA" ],
[ -8, -( 2.13 + 17.17)/2, 0, "uSD", [17.17 - 2.13, 16, 2] ],
// EXP
[ -4.5, 17, -90, "2p54boxhdr", 5, 2 ],
// TFT
[ 66.1, 21.7, 0, "2p54header", 5, 1 ],
// FAN0
[ 50.25, 3.8, 0, "jst_xh", 2, false, grey(20) ],
// FAN1
[ 49.9, 16.1, 0, "jst_xh", 2, false, grey(20) ],
// PS-ON
[ 58.1, 16.1, 0, "jst_xh", 2, false, grey(20) ],
// PWR-DET
[ 67.5, 16.0, 0, "jst_xh", 3, false, grey(20) ],
// E0-STOP
[ 78.2, 16.0, 0, "jst_xh", 3, false, grey(20) ],
// Z-PROBE
[ 87.2, 20.5, -90,"jst_xh", 5, false, grey(20) ],
// NEO Pixel
[ 78.2, 27.1, 0, "jst_xh", 3, false, grey(20) ],
// end stops
[ 58.60, 3.8, 0, "jst_xh", 2, false, grey(20) ],
[ 66.70, 3.8, 0, "jst_xh", 2, false, grey(20) ],
[ 74.90, 3.8, 0, "jst_xh", 2, false, grey(20) ],
// thermistors
[ 83.00, 3.8, 0, "jst_xh", 2, false, grey(20) ],
[ 91.10, 3.8, 0, "jst_xh", 2, false, grey(20) ],
// motor connections
[ 10.15, -4.2, 0, "jst_xh", 4, false, grey(20) ],
[ 30.35, -4.2, 0, "jst_xh", 4, false, grey(20) ],
[ 43.90, -4.2, 0, "jst_xh", 4, false, grey(20) ],
[ 57.25, -4.2, 0, "jst_xh", 4, false, grey(20) ],
[ 70.75, -4.2, 0, "jst_xh", 4, false, grey(20) ],
// motor jumpers
[ 20.6, 44.1, 0, "2p54header", 2, 1 ],
[ 39.6, 44.2, 0, "2p54header", 2, 1 ],
[ 60.1, 44.1, 0, "2p54header", 2, 1 ],
[ 80.3, 44.1, 0, "2p54header", 2, 1 ],
// SWD
[ 43.9, 39.2, 0, "2p54header", 1, 5 ],
// SPI
[ -3.1, 31.9, 0, "2p54header", 2, 3 ],
// PWR-1
[ -12.8, 30.3, 0, "2p54header", 3, 1 ],
// VOUT
[ -14.0, 34.4, 0, "2p54header", 2, 2 ],
// VIN
[ 17.3, 19.6, 0, "2p54header", 2, 2 ],
],
[] // accessories
];
BTT_SKR_E3_TURBO = [
"BTT_SKR_E3_TURBO", "BigTreeTech SKR E3 Turbo",
102, 90.25, 1.6, // size
1, // corner radius
3.5, // mounting hole diameter
5, // pad around mounting hole
grey(30), // color
false, // true if parts should be separate BOM items
[ // hole positions
for ( i=[ [0, 0], [62.15, 0.25] ])
(i + [21.6, -13.3]),
for( i=[ [0, -34.98 ], [31.80, -37.62 ], [95.68, -64.47] ])
(i + [3.75, -13.25])
],
[ // components
// cpu
[ 62.8, 42.5, 0, "chip", 14, 14, 1, grey(15) ],
// driver chips
for (x = [8.5, 27.5, 43.2, 58.5, 74])
[x, -20, 0, "chip", 5, 5, 1, grey(15)],
// mock up heat sinks over the chips
for (x = [8.5, 27.5, 43.2, 58.5, 74])
[x, -20, 0, "chip", 9, 8.5, 2, "DeepSkyBlue" ],
for (x = [8.5, 27.5, 43.2, 58.5, 74], y = [-4,-2,0,2,4])
[x, -20 + y, 0, "chip", 9, 0.75, 11, "DeepSkyBlue" ],
// heat dissipation for drivers under board
[ 43, -21, 0, "-block", 85, 8, 0.1, gold ],
// hotend and heated bed
[ 25.5, 20, 0, "chip", 10, 8.5, 4, grey(15) ],
[ 25.5, 20, 0, "-block", 11, 11, 0.1, gold ],
[ 36.25, 16.75, 0, "chip", 6.5, 6, 2.5, grey(15) ],
[ 36.25, 17, 0, "-block", 7.5, 7.5, 0.1, gold ],
[ 44.25, 16.75, 0, "chip", 6.5, 6, 2.5, grey(15) ],
[ 44.25, 17, 0, "-block", 7.5, 7.5, 0.1, gold ],
// voltage regulator
[ 15.1, 44.2, 0, "chip", 4, 5, 2, grey(15) ],
[ 12.1, 44.2, 0, "-block", 10, 10, 0.1, gold ],
// terminals
[ 5.25, 5.3, 180, "gterm", gt_5x17, 2, undef, grey(20) ],
[ 16.25, 5.4, -90, "gterm", gt_5x17, 2, undef, grey(20) ],
[ 26.25, 5.4, -90, "gterm", gt_5x17, 2, undef, grey(20) ],
[ 36.1, 6.7, -90, "gterm", gt_5x11, 2, undef, "lightgreen" ],
[ 45.0, 6.7, -90, "gterm", gt_5x11, 2, undef, "lightgreen" ],
[ -3, -(32.27 + 39.92)/2, 0, "usb_uA" ],
[ -8, -(12.13 + 27.17)/2, 0, "uSD", [17.17 - 2.13, 16, 2] ],
[ -22.2, 51.6, 0, "button_6mm" ],
// EXP
[ -4.45, 27.2, -90, "2p54boxhdr", 5, 2 ],
// AUX-2
[ -3.4, 42.5, -90, "2p54header", 4, 2 ],
// TFT
[ 73.7, 21, 0, "2p54header", 5, 1 ],
// FAN0
[ 52.1, 15.3, 180, "jst_xh", 2, false, grey(20) ],
// FAN1
[ 60.1, 15.3, 180, "jst_xh", 2, false, grey(20) ],
// PS-ON
[ 67.9, 15.3, 180, "jst_xh", 2, false, grey(20) ],
// E0-STOP
[ 77.1, 15.3, 180, "jst_xh", 3, false, grey(20) ],
// E1-STOP
[ 87.5, 15.3, 180, "jst_xh", 3, false, grey(20) ],
// Z-PROBE
[ 85.05, 34.6, 180, "jst_xh", 5, false, grey(20) ],
// NEO Pixel
[ 77, 26.8, 180, "jst_xh", 3, false, grey(20) ],
// PWR-DET
[ 87.7, 26.8, 180, "jst_xh", 3, false, grey(20) ],
// FAN2
[ 52.1, 3.8, 0, "2p54header", 1, 2],
// end stops and thermistors
for (x = [58.5 : 7.9 : 98.1])
[x, 3.7, 180, "jst_xh", 2, false, grey(20)],
// motor connections
for (x = [7, 27.1, 47.3, 67.5, 87.9])
[x, -3.9, 0, "jst_xh", 4, false, grey(20)],
[47.3, -10.4, 0, "jst_xh", 4, false, grey(20)], // second Z connector
// motor jumpers
for (x = [9.4, 26.4, 42.5, 58.7, 75.3])
[x, -33.7, 0, "2p54header", 2, 1],
// SWD
[ 45.4, 35.7, 0, "2p54header", 5, 1 ],
// USB power jumber
[ -12.6, 40.3, 0, "2p54header", 3, 1 ],
// VOUT
[ -13.9, 44.5, 0, "2p54header", 2, 2 ],
// VIN
[ 18.6, 29.8, 0, "2p54header", 2, 2 ],
],
[] // accessories
];
TMC2130 = [
"TMC2130", "TMC2130",
20, 14, 1.6, // size
0, 0, 0, // corner radius, mounting hole diameter, pad around mounting hole
grey(95), // colour
false, // true if parts should be separate BOM items
[], // hole positions
[
[ 10, 1, 0, "-2p54header", 8, 1 ],
[ 10, 13, 0, "-2p54header", 8, 1 ],
[ 12, 7, 0, "-chip", 6, 4, 1, grey(20) ],
// mock up a heat sink
[ 10, 7, 0, "block", 9, 8.5, 2, "DeepSkyBlue" ],
for (y = [-4,-2,0,2,4]) [ 10, 7 + y, 0, "block", 9, 0.75, 11, "DeepSkyBlue" ],
],
[]
];
BTT_SKR_V1_4_TURBO = [
"BTT_SKR_V1_4_TURBO", "BigTreeTech SKR v1.4 Turbo",
110, 85, 1.6, // size
1, // corner radius
3, // mounting hole diameter
4, // pad around mounting hole
grey(30), // colour
false, // true if parts should be separate BOM items
[ // hole positions
[-4, 4], [-4, -4], [4, -4], [4, 4]
],
[ // components
[ (29.15+31.5)/2, 8, -90, "usb_B" ],
[ (46.9+51.55)/2, 7, -90, "uSD", [14, 14, 2] ],
[ 105, 13, 0, "button_6mm" ],
[ 58, 43, 0, "chip", 15, 15, 1, grey(20) ],
// ESP-01 socket
[ 69.8, 4, 0, "2p54socket", 4, 2 ],
// terminals
[ 5.3, 13.2, 180, "gterm", gt_5x17, 2, undef, grey(20)],
[ 5.3, 25.8, 180, "gterm", gt_5x17, 2, undef, grey(20)],
[ 5.3, 37.2, 180, "gterm", gt_5x11, 2, undef, grey(20)],
[ 5.3, 47.2, 180, "gterm", gt_5x11, 2, undef, grey(20)],
[ 2.8, 56.7, -90, "jst_xh", 2, false, grey(20) ],
[ 10.9, 56.7, 90, "jst_xh", 2, false, grey(20) ],
[ 82, 4, 0, "jst_xh", 2, false, grey(20) ],
[ 90, 4, 0, "jst_xh", 2, false, grey(20) ],
[ 98, 4, 0, "jst_xh", 2, false, grey(20) ],
[ 87.7, 29.0, -90, "jst_xh", 3, false, grey(20) ],
[ 87.7, 39.5, -90, "jst_xh", 3, false, grey(20) ],
[ 87.7, 50.1, -90, "jst_xh", 3, false, grey(20) ],
[ 95.3, 29.0, -90, "jst_xh", 3, false, grey(20) ],
[ 95.3, 39.5, -90, "jst_xh", 3, false, grey(20) ],
[ 95.3, 50.1, -90, "jst_xh", 3, false, grey(20) ],
[ 85.7, 18.2, 180, "jst_xh", 3, false, grey(20) ],
[ 94.9, 18.2, 180, "jst_xh", 2, false, grey(20) ],
[ 77.2, 19.6, -90, "jst_xh", 3, false, grey(20) ],
[ 69.8, 11.0, 0, "jst_xh", 5, false, grey(20) ],
[ 69.0, 19.2, 0, "2p54header", 4, 1 ],
[ 57.8, 18.0, 0, "2p54header", 3, 2 ],
[ 28.0, 19.7, 0, "2p54header", 2, 2 ],
[ 37.6, 28.8, 0, "2p54header", 1, 3, undef, "red" ],
[ 77.8, 27.5, 0, "2p54header", 2, 2 ],
[ 81.8, 26.4, 0, "2p54header", 1, 3, undef, "red" ],
[ 43.8, 42.8, 0, "2p54header", 1, 5 ],
// EXP1 & EXP2
[ -6.6, 29.4, 90, "2p54boxhdr", 5, 2 ],
[ -6.6, 50.4, 90, "2p54boxhdr", 5, 2 ],
// motor axes connections
[ 11.2, -3.75, 180, "jst_xh", 2, false, grey(20) ],
[ 21.8, -3.75, 180, "jst_xh", 4, false, grey(20) ],
[ 35.0, -3.75, 180, "jst_xh", 4, false, grey(20) ],
[ 48.2, -3.75, 180, "jst_xh", 4, false, grey(20) ],
[ 61.4, -3.75, 180, "jst_xh", 4, false, grey(20) ],
[ 74.7, -3.75, 180, "jst_xh", 4, false, grey(20) ],
[ 87.9, -3.75, 180, "jst_xh", 4, false, grey(20) ],
[ 98.5, -3.75, 180, "jst_xh", 2, false, grey(20) ],
// stepper drivers
[ 11.5, 62.5, 0, "2p54socket", 8, 1, undef, undef, undef, "red" ],
[ 11.5, 75.2, 0, "2p54socket", 8, 1 ],
[ 2.6, 66.3, 90, "2p54socket", 2, 1, undef, undef, undef, "red" ],
[ 11.5, 68.85, 0, "pcb", 11, TMC2130 ],
[ 33.1, 62.5, 0, "2p54socket", 8, 1, undef, undef, undef, "red" ],
[ 33.1, 75.2, 0, "2p54socket", 8, 1 ],
[ 24.2, 66.3, 90, "2p54socket", 2, 1, undef, undef, undef, "red" ],
[ 33.1, 68.85, 0, "pcb", 11, TMC2130 ],
[ 54.8, 62.5, 0, "2p54socket", 8, 1, undef, undef, undef, "red" ],
[ 54.8, 75.2, 0, "2p54socket", 8, 1 ],
[ 45.9, 66.3, 90, "2p54socket", 2, 1, undef, undef, undef, "red" ],
[ 54.8, 68.85, 0, "pcb", 11, TMC2130 ],
[ 76.4, 62.5, 0, "2p54socket", 8, 1, undef, undef, undef, "red" ],
[ 76.4, 75.2, 0, "2p54socket", 8, 1 ],
[ 67.5, 66.3, 90, "2p54socket", 2, 1, undef, undef, undef, "red" ],
[ 76.4, 68.85, 0, "pcb", 11, TMC2130 ],
[ 98.1, 62.5, 0, "2p54socket", 8, 1, undef, undef, undef, "red" ],
[ 98.1, 75.2, 0, "2p54socket", 8, 1 ],
[ 89.2, 66.3, 90, "2p54socket", 2, 1, undef, undef, undef, "red" ],
// closed loop pins
[ 24.4, 57.5, 0, "2p54header", 6, 1 ],
[ 40.6, 57.5, 0, "2p54header", 6, 1 ],
[ 56.7, 57.5, 0, "2p54header", 6, 1 ],
[ 72.9, 57.5, 0, "2p54header", 6, 1 ],
[ 89.1, 57.5, 0, "2p54header", 6, 1 ],
],
[] // accessories
];
Melzi = ["Melzi", "Melzi electronics", 203.2, 49.53, 1.6, 3.81, 3.1, 6, "green", false, [[3.81, 3.81], [-3.81, 3.81], [-3.81, -3.81], [3.81, -3.81]],
[],
[": USB A to Mini B lead", ": Micro SD card"]];
OPZ2 = ["OPZ2", "Orange Pi Zero 2", 60, 53, 1.4, 1.75, 3, 5, "blue", false, [[2.5, 2.5], [-2.5, 2.5], [-2.5, -2.5], [2.5, -2.5]],
[[-2.54, 53/2, 90, "2p54header", 13, 2],
[-10, -10-2.54*2, 0, "2p54header", 3, 1],
[2.54/2, 53/2, 90, "2p54header", 13, 1],
[6+16/2, -10.5+1, 90, "rj45"],
[24+9/2, -3.6+1, 90, "usb_C"],
[37+6.5/2, -8.5/2+1, 90, "micro_hdmi"],
[-7-5.8/2, -7+1, 90, "usb_vAx1"],
[-17, 18, 0, "chip", 13, 7.5, 1],
[-17, 28, 0, "chip", 13, 7.5, 1],
[26, 23, 0, "chip", 12.2, 14, 1],
[8.1+10.3/2, 3.7+10.3/2, 0, "chip", 10.3, 10.3, 1.8, "silver"],
[10.7+14.6/2, 14.7/2, 90, "-uSD", [14.6, 14.7, 2]],
],
[": Micro SD card"],
[60-2.54*1.5, 53/2 - 6*2.54, 2, 13]];
RPI3A = ["RPI3A", "Raspberry Pi 3 A+", 65, 56, 1.4, 3, 2.75, 6, "green", false, [[3.5, 3.5], [61.5, 3.5], [61.5, -3.5], [3.5, -3.5]],
[[32.5, -3.5, 0, "2p54header", 20, 2],
[27, -24.6, 0, "chip", 14, 14, 1],
[53.5, 6, -90, "jack"],
[32, 4.4, -90, "hdmi"],
[-6.5, 31.45, 0, "usb_Ax1"],
[10.6, 2, -90, "usb_uA"],
[3.6, 28, 90, "flex"],
[45, 11.5,-90, "flex"],
[7.75, 28, 180, "-uSD", [12, 11.5, 1.28]],
],
[": Micro SD card"],
[32.5 - 9.5 * 2.54, 52.5 - 1.27, 20, 2]];
RPI3 = ["RPI3", "Raspberry Pi 3", 85, 56, 1.4, 3, 2.75, 6, "green", false, [[3.5, 3.5], [61.5, 3.5], [61.5, -3.5], [3.5, -3.5]],
[[32.5, -3.5, 0, "2p54header", 20, 2],
[27, -24.6, 0, "chip", 14, 14, 1],
[60, -22.3, 0, "chip", 9, 9, 0.6],
[-8.5, 10.25, 0, "rj45"],
[-6.5, 29, 0, "usb_Ax2"],
[-6.5, 47, 0, "usb_Ax2"],
[53.5, 6, -90, "jack"],
[32, 4.4, -90, "hdmi"],
[10.6, 2, -90, "usb_uA"],
[3.6, 28, 90, "flex"],
[45, 11.5,-90, "flex"],
[7.75, 28, 180, "-uSD", [12, 11.5, 1.28]],
],
[": Micro SD card"],
[32.5 - 9.5 * 2.54, 52.5 - 1.27, 20, 2]];
RPI4 = ["RPI4", "Raspberry Pi 4", 85, 56, 1.4, 3, 2.75, 6, "green", false, [[3.5, 3.5], [61.5, 3.5], [61.5, -3.5], [3.5, -3.5]], [
[32.5, -3.5, 0, "2p54header", 20, 2],
[-6.5, 9, 0, "usb_Ax2"],
[-6.5, 27, 0, "usb_Ax2"],
[-8.5, 45.75, 0, "rj45"],
[ 4, 28, 90, "flex"],
[11.2, 3.675 - 1.6, -90, "usb_C"],
[ 26, 2.5, -90, "micro_hdmi"],
[39.5, 2.5, -90, "micro_hdmi"],
[46.5, 11.5, -90, "flex"],
[ 54, 6, -90, "jack"],
[ 29.25, 32.5, 0, "chip", 14, 14, 2.4],
[ 60, -22.3, 0, "chip", 9, 9, 0.6],
[7.75, 28, 180, "-uSD", [12, 11.5, 1.28]]
], [": Micro SD card"], [32.5 - 9.5 * 2.54, 52.5 - 1.27, 20, 2]
];
RPI0 = ["RPI0", "Raspberry Pi Zero", 65, 30, 1.4, 3, 2.75, 6, "green", false, [[3.5, 3.5], [-3.5, 3.5], [-3.5, -3.5], [3.5, -3.5]],
[//[32.5, -3.5, 0, "2p54header", 20, 2],
[25.5, 13, 0, "chip", 12, 12, 1.2],
[12.4, 3.4, -90, "mini_hdmi"],
[54, 2, -90, "usb_uA"],
[41.4, 2, -90, "usb_uA"],
[7.25, 16.7, 180, "uSD", [12, 11.5, 1.4]],
[-1.3, 15, -90, "flat_flex"],
],
[": Micro SD card"],
[32.5 - 9.5 * 2.54, 26.5 - 1.27, 20, 2]];
RPI_Pico = [
"RPI_Pico", "Raspberry Pi Pico",
51, 21, 1.6, // size
0.5, // corner radius
2.1, // mounting hole diameter
0, // pad around mounting hole, pad is actually 3.8, but unplated
"green", // colour
false, // true if parts should be separate BOM items
[ // hole positions
[-2, 4.8], [-2, -4.8], [2, -4.8], [2, 4.8]
],
[ // components
[ 1.75, 21/2, 180, "usb_uA" ],
[ 25, 21/2, 0, "chip", 7, 7, 0.8],
// mock up the reset button
[ 12.75, 7.5, 0, "block", 4.5, 3.35, 2, "DarkGray"],
[ 12.75, 7.5, 0, "block", 3, 2.25, 2.75, "LightGray"],
],
[], // accessories
[1.37, 1.61, 20, 2, gold, 2.54, 17.78], // 20x2 grid of holes
];
EnviroPlus = ["EnviroPlus", "Enviro+", 65, 30.6, 1.6, 3, 2.75, 6, "white", false, [[3.5, 3.8], [-3.5, 3.8], [-3.5, -3.8], [3.5, -3.8]],
[[32.5, -3.8, 0, "-2p54socket", 20, 2, false, 5, true],
[-15.5, 2.5, 0, "-chip", 15, 5, 3, "white"],
[-14.25,16.25, 0, "chip", 27.5, 13.5, 1.5]
],
[],
[8, 1.5, 9, 1]];
ArduinoUno3 = ["ArduinoUno3", "Arduino Uno R3", 68.58, 53.34, 1.6, 0, 3.3, 0, "#2140BE", false, [[15.24, 50.8],[66.04, 35.56],[66.04, 7.62],[13.97, 2.54]],
[[30.226, -2.54, 0, "2p54socket", 10, 1],
[54.61, -2.54, 0, "2p54socket", 8, 1],
[36.83, 2.54, 0, "2p54socket", 8, 1],
[57.15, 2.54, 0, "2p54socket", 6, 1],
[64.91, 27.89, 0, "2p54header", 2, 3],
[18.796, -7.00, 0, "2p54header", 3, 2],
[ 6.5, -3.5, 0, "button_6mm"],
[4.7625, 7.62, 180,"barrel_jack"],
[1.5875, 37.78, 180,"usb_B"],
[46.99, 17, 270,"pdip", 28, "ATMEGA328", true],
[18.7, 25.8, 0, "rd_xtal", HC49_4H],
[7.5, 17.2, 90, "smd_sot", SOT223],
[7.9, 26.5, 90, "smd_sot", SOT23],
[21.3, 2.7, 0, "smd_diode", DO214AC],
[27.8, 34.6, 0, "smd_led", LED0805, "red"],
[27.8, 37, 0, "smd_led", LED0805, "red"],
[27.8, 42.3, 0, "smd_led", LED0805, "red"],
[58.8, 37.1, 0, "smd_led", LED0805, "red"],
],
[],[],
inch([
[-1.35, -1.05],
[-1.35, 1.05],
[ 1.19, 1.05],
[ 1.25, 0.99],
[ 1.25, 0.54],
[ 1.35, 0.44],
[ 1.35, -0.85],
[ 1.25, -0.95],
[ 1.25, -1.05],
]),
M2p5_pan_screw
];
ArduinoLeonardo = ["ArduinoLeonardo", "Arduino Leonardo", 68.58, 53.34, 1.6, 0, 3.3, 0, "#2140BE", false, [[15.24, 50.8],[66.04, 35.56],[66.04, 7.62],[13.97, 2.54]],
[[30.226, -2.54, 0, "2p54socket", 10, 1],
[54.61, -2.54, 0, "2p54socket", 8, 1],
[36.83, 2.54, 0, "2p54socket", 8, 1],
[57.15, 2.54, 0, "2p54socket", 6, 1],
[64.91, 27.89, 0, "2p54header", 2, 3],
[ 6.5, -3.5, 0, "button_6mm"],
[4.7625, 7.62, 180, "barrel_jack"],
[1.5875, 38.1, 180,"usb_uA"],
],
[],[],
inch([
[-1.35, -1.05],
[-1.35, 1.05],
[ 1.19, 1.05],
[ 1.25, 0.99],
[ 1.25, 0.54],
[ 1.35, 0.44],
[ 1.35, -0.85],
[ 1.25, -0.95],
[ 1.25, -1.05],
]),
M2p5_pan_screw
];
Keyes5p1 = ["Keyes5p1", "Keyes5.1 Arduino Uno expansion board", 68.58, 53.34, 1.6, 0, 3.3, 0, "#2140BE", false, [[15.24, 50.8],[66.04, 35.56],[66.04, 7.62],[13.97, 2.54]],
[[30.226, -2.54, 0, "-2p54header", 10, 1],
[54.61, -2.54, 0, "-2p54header", 8, 1],
[36.83, 2.54, 0, "-2p54header", 8, 1],
[57.15, 2.54, 0, "-2p54header", 6, 1],
],
[],[],
inch([
[-1.35, -1.05],
[-1.35, 1.05],
[ 1.19, 1.05],
[ 1.25, 0.99],
[ 1.25, 0.54],
[ 1.35, 0.44],
[ 1.35, -0.85],
[ 1.25, -0.95],
[ 1.25, -1.05],
]),
M2p5_pan_screw
];
ExtruderPCB = ["ExtruderPCB", "Extruder connection PCB",
33.02, 24.13, 1.6, 0, 0, 0, "green", true, [],
[[3 * 1.27, 24.13 / 2, 90, "D_plug", DCONN15],
[-(8.89 + 2.75 * 2.54), 2.5 * 1.27 + 24.13 / 2, 90, "molex_hdr", 3],
[-(8.89 - 1.5 * 2.54), -3.5 * 1.27 + 24.13 / 2, -90, "molex_hdr", 2],
[-(8.89 - 2.54), 2.5 * 1.27 + 24.13 / 2, 90, "term254", 4],
[-(8.89 + 2 * 2.54), -3.5 * 1.27 + 24.13 / 2, -90, "term254", 4],
], []];
PI_IO = ["PI_IO", "PI_IO V2", 35.56, 25.4, 1.6, 0, 0, 0, "green", true, [],
[[(3.015 - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.685) * 25.4, 90, "term35", 2],
[(3.46 - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.69) * 25.4, 90, "term35", 2],
[(3.91 - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.69) * 25.4, 90, "term35", 2],
[(3.4 - 2.7) * 25.4, (4.5 - 4.15) * 25.4, 0, "2p54socket", 13, 2, true],
], []];
ZC_A0591 = ["ZC_A0591", "ZC-A0591 ULN2003 driver PCB", 35, 32, 1.6, 0, 2.5, 0, "green", false, [[2.25, 3.25], [-2.25, 3.25], [2.25, -3.25], [-2.25, -3.25] ],
[ [ 11.725, 8.3, -90, "jst_xh", 5],
[ -6.5, 10, 0, "2p54header", 1, 4],
[ 20.4, -4.5, 0, "2p54header", 4, 1],
[ 20.4, 11, 180, "pdip", 16, "ULN2803AN", true],
[ 5.5, 6, 0, "led", LED3mm, [1,1,1, 0.5]],
[ 5.5, 10.5, 0, "led", LED3mm, [1,1,1, 0.5]],
[ 5.5, 15, 0, "led", LED3mm, [1,1,1, 0.5]],
[ 5.5, 19.5, 0, "led", LED3mm, [1,1,1, 0.5]],
for(i = [0 : 3]) [5.5 + inch(0.1) * i, -5.5, -90, "ax_res", res1_8, 510, 5, 5.5]
], [], [], [], M2p5_pan_screw];
MT3608 = ["MT3608", "MT3608 boost converter module", 37, 17, 1.2, 2, 1.5, [5, 3], "#2140BE", false, [[3.0725, 5.095], [3.0725, -5.095], [-3.0725, 5.095], [-3.0725, -5.095]],
[ [-12.05 , -6.8, 180, "trimpot10"]
]];
TP4056 = ["TP4056", "TP4056 Li-lon Battery charger module", 26.2, 17.5, 1.0, 0, 1.0, [2.4, 2.4], "#2140BE", false,
[[1.67, 1.8], [1.67, -1.8], [-1.67, 1.8], [-1.67, -1.8], [-1.67, -4.98], [-1.67, 4.98]],
[ [ 2, 17.5 / 2, 180, "usb_uA"],
[ 7, -2 , 0, "smd_led", LED0805, "red"],
[ 11, -2 , 0, "smd_led", LED0805, "blue"],
]];
WD2002SJ = ["WD2002SJ", "WD2002SJ Buck Boost DC-DC converter", 78, 47, 1.6, 0, 3.2, 0, "#2140BE", false, [[4,4], [-4,4], [-4,-4], [4,-4]],
[ [ 39, -20.5, 0, "-chip", 63, 41, 3.4, "silver"],
[ -4, 12, 0, "gterm508", 2, [], "blue"],
[ 4, 12, 180, "gterm508", 2, [], "blue"],
[ -25.5, 3.1, 0, "trimpot10", true],
[ 30.5, 3.1, 0, "trimpot10", true],
[ 41.5, 3.1, 0, "trimpot10", true],
[ -10.4, 1.4, 0, "smd_led", LED0805, "blue"],
[ 15.7, 2.7, 0, "smd_led", LED0805, "red"],
],
[]];
MP1584EN = ["MP1584EN", "MP1584EN 3A buck converter", 22, 17, 1.25, 0, 1, [2, 2], "green", false,
[[1.75, 1.75], [-1.75, 1.75], [-1.75, 4.4], [1.75, 4.4]],
[ [1.75, 8.5, 90, "smd_cap", CAP1206, 1],
[-1.75, 8.5, 90, "smd_cap", CAP1206, 1],
[7.5, 8.5, 0, "smd_soic", SOIC8, "WP1584EN"],
[3.9, 8.3, 90, "smd_res", RES0603, "104"],
[3.9, 11.2, 90,"smd_cap", CAP0603, 0.5],
[3.9, 5.4, 90, "smd_res", RES0603, "822"],
[6.2, 3.5, 0, "smd_res", RES0603, "104"],
[6.2, 2.1, 0, "smd_cap", CAP0603, 0.5],
[9.2, 3.5, 0, "smd_res", RES0603, "104"],
[9.2, 2.1, 0, "smd_res", RES0603, "104"],
[6.3, 14.4, 0, "smd_diode",DO214AC, "SS34"],
[12.1, 4.9, 0, "smd_cap", CAP0603, 0.5],
[15.8, 4.9, 0, "smd_cap", CAP0603, 0.5],
[14.5, 10, 90, "smd_inductor", IND2525, "4R7"],
[14.7, 1.8,-90,"smd_pot", TC33X1, "10K"],
[13.9, -1.4, 0,"text", 5, 1.5, "D-SUN", "Liberation Mono:style=Bold"],
[17.7, -1.2, 0,"text", 1.5,1.5,"\u2296", "MS Gothic:style=Bold"],
[17.9, 1.75, 0,"text", 1.5,1.5,"\u2295", "MS Gothic:style=Bold"],
],
[],
[1.75,17 -4.4, 2, 2, silver, 18.5, 2.65], // Abuse the grid facility to get the round pads
];
PERF80x20 = ["PERF80x20", "Perfboard 80 x 20mm", 80, 20, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.71, 3.65]];
PERF70x50 = ["PERF70x50", "Perfboard 70 x 50mm", 70, 50, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.79, 3.41]];
PERF70x30 = ["PERF70x30", "Perfboard 70 x 30mm", 70, 30, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.79, 3.57]];
PERF60x40 = ["PERF60x40", "Perfboard 60 x 40mm", 60, 40, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.87, 3.49]];
PERF70x51 = ["PERF70x51", "Perfboard 70 x 51mm", 70, 51, 1.0, 0, 3.0, 0, "sienna", true, [[3.0, 5.25], [-3.0, 5.25], [3.0, -5.25], [-3.0, -5.25]], [], [], [5.79, 3.91]];
PERF74x51 = ["PERF74x51", "Perfboard 74 x 51mm", 74, 51, 1.0, 0, 3.0, 0, "sienna", true, [[3.0, 3.5], [-3.0, 3.5], [3.0, -3.5], [-3.0, -3.5]], [], [], [9.5, 4.5]];
PSU12V1A = ["PSU12V1A", "PSU 12V 1A", 67, 31, 1.7, 0, 3.9, 0, "green", true, [[3.5, 3.5], [-3.5, 3.5], [-3.5, -3.5], [3.5, -3.5]], [], []];
RAMPSEndstop = ["RAMPSEndstop", "RAMPS Endstop Switch",
40.0, 16.0, 1.6, 0.5, 2.54, 0, "red", false,
[
[2, 2, false], [2, 13.5, false], [17, 13.5], [36, 13.5]
],
[
[ 11.6, 8, -90, "jst_xh", 3, true, "white", "silver"],
[ 26.5, 12.75, 0, "microswitch", small_microswitch],
[ 27.5, 17.5, 15, "chip", 15, 0.5, 4.5, "silver"],
],
[]];
ESP_01 = [
"ESP-01", "ESP-01",
24.8, 14.6, 1, // size
0, // corner radius
0, // mounting hole diameter
0, // pad around mounting hole
grey(25), // color
false, // true if parts should be separate BOM items
[], // hole positions
[ // components
[ 2.8, -7.25, 0, "-2p54header", 2, 4 ],
[ -14.55, -11.3, 0, "chip", 5.25, 5.25, 2.25, grey(15) ],
[ -14, -5.2, 0, "chip", 4.5, 4.75, 1.1, grey(15) ],
// antenna
for (y = [ 2.8 : 2.3 : 7.4 ]) [ -0.7, -y, 0, "block", 0.7, 1.75, 0.1, gold ],
for (y = [ 4 : 2.3 : 10.6 ]) [ -4.3, -y, 0, "block", 0.7, 1.75, 0.1, gold ],
for (y = [ 3.4 : 2.3 : 10.1 ]) [ -2.5, -y, 0, "block", 4.3, 0.7, 0.1, gold ],
for (y = [ 4.55 : 2.3 : 11.2 ]) [ -2.5, -y, 0, "block", 4.3, 0.7, 0.1, gold ],
[ -0.7, -10.85, 0, "block", 0.7,3.75, 0.1, gold ],
[ -6.6, -5.8, 0, "block", 0.7, 7.5, 0.1, gold ],
[ -4.8, -2.3, 0, "block", 8.8, 0.7, 0.1, gold ],
],
[], // accessories
[2.8 - 1.27, 3.54, 2, 4, silver, 2.54, 2.54] // grid
];
XIAO = [
"XIAO", "Seeeduino XIAO",
21, 18, 1.2, // Size
1.5, // corner radius
0.8, // mounting hole diameter
[2, 2.6, 1- eps, gold], // pad around mounting hole
grey(25), // color
false, // true if parts should be separate BOM items
[for(x = [0:6], y = [-1,1]) [x * 2.54 + 2.71, y * 3 * 2.54 + 9], // Inboard hole positions
for(x = [0:6], y = [-1,1]) [x * 2.54 + 2.71, y * 9 + 9]], // Hole positions on the edge, pad overlaps the inboard holes
[ // components
[7.6, 9, 0, "block", 12.3, 12, 2.41, silver, false, 0.3, 0.3], // can
[21 + 1.76 - 7.35 / 2, 9, 0, "usb_C"],
],
[] // accessories
];
LIPO_fuel_gauge = [
"LIPO_fuel_gauge", "LIPO fuel gauge",
24, 10, 1.6, // Size
0, // corner radius
1, // mounting hole diameter
1.8, // pad around mounting hole
"red", // color
false, // true if parts should be separate BOM items
[for(x = [0:2], y = [-1,1]) [x * 2.54 + 5.27, y * 1.5 * 2.54 + 5],
for(x = 3, y = [-1,1]) [x * 2.54 + 5.27, y * 0.5 * 2.54 + 5]],
[ // components
[17, 5, 90, "jst_ph", 2, true],
[2.54 + 5.27, 1.5 * 2.54 + 5, 0, "-2p54joiner", 3, 1],
[2.54 + 5.27, -1.5 * 2.54 + 5, 0, "-2p54joiner", 3, 1],
[3 * 2.54 + 5.27, 5, 0, "-2p54joiner", 1, 2],
[6.4 + 1.5, 5, 0, "chip", 3, 2, 0.8],
[1.2, 2.5, 90, "smd_res", RES0603, "472"],
[2.4, 2.5, 90, "smd_res", RES0603, "472"],
[1.2, -2.5, 90, "smd_res", RES0603, "472"],
[2.4, -2.5, 90, "smd_res", RES0603, "472"],
[10.35, -4, -90, "smd_res", RES0603, "181"],
[10.35, 4, -90, "smd_res", RES0603, "102"],
[12.89, 1.5 * 2.54 + 5, 0, "smd_cap", CAP0603, 0.85],
[12.89,-1.5 * 2.54 + 5, 0, "smd_cap", CAP0603, 0.85],
],
[] // accessories
];
ESP32_DOIT_V1 = let(l = 51.45, w = 28.33, pitch = inch(1), pins = 15, poffset = inch(0.05)) [
"ESP32_DOIT_V1", "ESP32 DOIT DEV KIT V1",
l, w, 1.6, // Size
2, // corner radius
3, // mounting hole diameter
0, // pad around mounting hole
grey(20), // color
false, // true if parts should be separate BOM items
[for(x = [-1, 1], y = [-1, 1]) [x * 46.7 / 2 + l / 2, y * 23.4 / 2 + w / 2, false]],
[ // components
[l / 2 + poffset, w / 2 - pitch / 2, 0, "-2p54joiner", pins, 1],
[l / 2 + poffset, w / 2 + pitch / 2, 0, "-2p54joiner", pins, 1],
[1.75, w / 2, 180, "usb_uA" ],
[35, w / 2, 0, "block", 17.7, 16, 3, silver, false, 0.3, 0.3], // can
for(y=[-1,1]) [3.5, y * 6.5, 0, "chip", 4, 3, 1.6, silver], // Mock button surround
for(y=[-1,1]) [3.5, y * 6.5, 0, "chip", 1.8,0, 2.0, grey(20)], // Mock buttons
for(y=[-1,1]) [21.6, y * 9, 0, "smd_led", LED0603, y < 0 ? "red" : "blue"],
[14.8 - 2.5, 8, 0, "chip", 5, 5, 0.8],
[l / 2 + poffset + inch(0.7), w / 2 + pitch / 2 - 2, 90, "smd_cap", CAP1206, 1.75],
],
[], // accessories
[(l - inch(pins - 1) / 10) / 2 + inch(0.05), (w - pitch) / 2, pins, 2, silver, 2.54, pitch], // 15x2 grid of holes
];
ArduinoNano = let(l = 43.18, w = 17.78, pitch = inch(0.6), pins = 15, poffset = -0.05, led_spacing = [1.5, 1.8]) [
"ArduinoNano", "Arduino Nano",
l, w, 1.6, // Size
0, // corner radius
1.85, // mounting hole diameter
0, // pad around mounting hole
"#2140BE", // color
false, // true if parts should be separate BOM items
[for(x = [-1, 1], y = [-1, 1]) [x * 40.64 / 2 + l / 2, y * 15.24 / 2 + w / 2]],
[ // components
[l / 2 + poffset, w / 2 - pitch / 2, 0, "-2p54joiner", pins, 1],
[l / 2 + poffset, w / 2 + pitch / 2, 0, "-2p54joiner", pins, 1],
[l / 2 + poffset + inch(0.75), w / 2, 0, "2p54header", 2, 3, false, undef, false, false],
[3.1, w / 2, 180, "usb_miniA" ],
[l / 2 - inch(0.25), w / 2, 45, "chip", 7, 7, 1.3],
[l / 2 + poffset + inch(0.15), w / 2, 0, "chip", 3.5, 6, 1.8, silver ], // mock button
[l / 2 + poffset + inch(0.15), w / 2, 0, "chip", 1.3, 2.6, 2.6, grey(90) ], // mock button
for(y = [-1.5 : 1.5]) [l / 2 + poffset + inch(0.4) - led_spacing.x, w / 2 + y * led_spacing.y, 0, "smd_res", RES0603, "1K"],
for(y = [-1.5 : 1.5]) [l / 2 + poffset + inch(0.4) + led_spacing.x, w / 2 + y * led_spacing.y, 0, "smd_led", LED0603, ["green", "red", "orange", "orange"][y + 1.5]],
],
[], // accessories
[(l - inch(pins - 1) / 10) / 2 + poffset, (w - pitch) / 2, pins, 2, silver, 2.54, pitch], // 15x2 grid of holes
];
KY_040 = ["KY_040", "KY-040 rotart encoder breakout",
26.3, 19.5, 1.6, 0, 3, 0, grey(20), false,
[
[3.23 + 1.5, 1.3 + 1.5],
[3.23 + 1.5 + 16.775, 1.3 + 1.5]
],
[
[-3, 12, 90, "2p54header", 5, 1, undef, undef, true],
[10.8, 11.3, 0, "potentiometer", KY_040_encoder],
],
[]];
L9110S = ["L9110S", "L9110S 2-Channel motor driver module", 29.2, 23, 1.6, 0, 3, 0, "#2140BE", false, [[10.7, 2.3], [10.7, -2.3], [-5.3, 2.3], [-5.3, -2.3] ],
[
[ -1.3, 11.5, 0, "2p54header", 1, 6],
[ 16, 9.5 , 0, "smd_led", LED0805, "red"],
for(i = [-1, 1]) [ 4, 5.5*i, 180, "gterm508", 2],
for(i = [-1, 1]) [ 17.38, 3*i, 90, "smd_soic", SOIC8, "" ]
],
[]];
PanelDue_v3 = ["PanelDue_v3", "Panel Due v3.0a LCD Display interface", 53, 73, 1.2, 0, 3.2, 0, "#2140BE", false, [[5,5], [5, -5], [43.7, 37.2]],
[
[ 45.0, 26.5, 45, "buzzer", 6, 12],
[ 32.8, 36.5, 90, "2p54socket", 20, 2],
[ 31.3, 5.9, 180, "molex_hdr", 4, 1],
[ 38.0, 53.2, -90, "2p54boxhdr", 5, 2, false, true, true],
[ 40.8, 67.4, 0, "button_6mm"],
[ 45.1, 16.5, 0, "button_6mm"],
[ 51.2, 68.0, 0, "usb_uA"],
[ 13.6, 35.2, 0, "smd_qfp", QFP50P1200X1200X160_64N, "ATSAM4S4BA"],
[ 14.6, 7.9, 180, "smd_sot", SOT223],
[ 23.2, 14, 0, "smd_sot", SOT23],
[ 31.7, 65, 180, "smd_diode", DO214AC],
[ 24.9, 3.8, 180, "smd_diode", DO214AC],
[ 1.9, 33, -90, "smd_cap", CAP0603, 0.5],
[ 1.9, 28.9, 90, "smd_cap", CAP0603, 0.5],
[ 14.6, 13.2, 0, "smd_cap", CAP0805, 0.85],
[ 20.3, 57.5, 90, "smd_res", RES0603],
[ 18.1, 57.5, 90, "smd_res", RES0603],
[ 27.6, 57, 0, "smd_res", RES0603],
[ 27.3, 7.2, 0, "smd_res", RES0603],
[ 27.3, 9.7, 0, "smd_res", RES0603],
[ 18.5, 11.5, 90, "smd_cap", CAP0805, 0.85],
[ 32.5, 71.2, 180, "smd_cap", CAP0603, 0.5],
[ 14.1, 25.1, 90, "smd_cap", CAP0603, 0.5],
[ 4.2, 36.9, 0, "smd_cap", CAP0603, 0.5],
[ 7.7, 28.4, 90, "smd_cap", CAP0603, 0.5],
[ 22.0, 34.6, 0, "smd_cap", CAP0603, 0.5],
[ 11.4, 44.5, 90, "smd_cap", CAP0603, 0.5],
[ 22.1, 31.2, 0, "smd_cap", CAP0603, 0.5],
[ 12.0, 25.5, 90, "smd_cap", CAP0603, 0.5],
[ 16.2, 24.2, 90, "smd_cap", CAP0603, 0.85],
[ 9.3, 44.5, 90, "smd_cap", CAP0603, 0.85],
[ 5.3, 34.9, 0, "smd_cap", CAP0603, 0.5],
[ 37.5, 61.9, 90, "smd_res", RES0603, "0"],
[ 4.8, 26.5, 0, "smd_cap", CAP0603, 0.85],
[ 3.3, 24.5, 0, "smd_res", RES0603, "1"],
[ 4.8, 30.8, 90, "chip", 5, 3.2, 1.1],
[ 6.9, 24.5, 0, "smd_res", L2012C],
[ 21.8, 7.4, 0, "smd_res", L2012C],
[ 40.8, 71.9, 0, "text", 6, 1.42, "Erase"],
[ 51.4, 16.5, 90, "text", 6, 1.42, "Reset"],
[ 51.4, 52.2, 90, "text", 7.4, 1.42, "CONN_SD"],
[ 2.7, 9.7, 0, "text", 4, 1.27, "GND"],
[ 8.0, 9.7, 0, "text", 4, 1.27, "3.3V"],
[ 38.1, 21.2, 0, "text", 4, 1.42, "3.3V"],
[ 40.7, 12.2, 0, "text", 2, 1.42, "5V"],
[ 49.8, 9.8, 0, "text", 3, 1.27, "Din"],
[ 50.3, 7.3, 0, "text", 4, 1.27, "Dout"],
[ 49.8, 4.7, 0, "text", 3, 1.27, "Gnd"],
[ 49.8, 2.2, 0, "text", 3, 1.27, "+5V"],
],
[],
[6, 60.8 - inch(0.3), 1, 4, silver, 2.54, 2.54, // X4
38, 16.1 - inch(0.1), 1, 3, silver, 2.54, 2.54, // JP1
3.1, 12, 2, 1, silver, 4.6, 2.54, // test points
31.3, 5.9 - inch(0.15), 1, 4, silver, 2.54, 2.64, // X1
38 - inch(0.05), 53.2 - inch(0.2), 2, 5, silver, 2.54, 2.54, // X5
32.8- inch(0.05),36.5 - inch(0.95),2, 20, silver, 2.54, 2.54, // X3
],
];
tiny_pcbs = [XIAO, MP1584EN, TP4056, ESP_01, LIPO_fuel_gauge];
big_pcbs = [BTT_RELAY_V1_2, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5];
pcbs = [RAMPSEndstop, MT3608, KY_040, L9110S, ZC_A0591, ArduinoNano, RPI_Pico, ESP32_DOIT_V1, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, OPZ2, PanelDue_v3, RPI3A, RPI3, RPI4];
pcbs_not_shown = [Melzi, Duex2, PSU12V1A, Keyes5p1, PI_IO, ExtruderPCB];
perfboards = [PERF74x51, PERF70x51, PERF70x50, PERF60x40, PERF70x30, PERF80x20];
use