openscad/NopSCADlib
1
0
Fork 0
mirror of https://github.com/nophead/NopSCADlib.git synced 2025-09-24 22:21:28 +02:00
Code Issues Releases Wiki Activity
Files
f032bb76db516a0265817e7c6d2233e2e847d51f
NopSCADlib/vitamins
History
Alex Verschoot f032bb76db added convexity to the linear extrude
2025-07-18 19:52:45 +02:00
..
microview
…
stl
…
7_segment.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
7_segments.scad
…
antenna.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
antennas.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
axial.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
axials.scad
Added axial diodes, radial transistors, discs and modules.
2023-07-28 10:39:07 +01:00
ball_bearing.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
ball_bearings.scad
adding test code for weld nuts and rod ends, adding ball bearings to test code list, and updating code for dome screw heads to use an angle to determine inset distance of the lower taper
2024-08-23 14:32:03 -05:00
batteries.scad
Restored Lumintop colour to white and made text black on white batteries.
2024-10-10 00:14:58 +01:00
battery.scad
Restored Lumintop colour to white and made text black on white batteries.
2024-10-10 00:14:58 +01:00
bearing_block.scad
Rendred the 3D difference.
2023-07-22 16:36:11 +01:00
bearing_blocks.scad
Added SBR rails
2023-06-30 12:57:13 +02:00
belt.scad
Belt part number is not always the same as the pitch.
2024-01-12 22:30:34 +00:00
belts.scad
Added GT2x12, GT3x6, GT3x9 and GT3x12 belts.
2024-01-14 22:50:26 +00:00
bldc_motor.scad
…
bldc_motors.scad
…
blower.scad
Fixed blower_exit_offset() for square blowers with 2 screws.
2022-01-23 09:04:46 +00:00
blowers.scad
…
box_section.scad
…
box_sections.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
bulldog.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
bulldogs.scad
…
button.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
buttons.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
cable_strip.scad
…
camera.scad
Added camera_lens_height() function.
2024-03-14 20:58:02 +00:00
cameras.scad
Fixed FOV for ESP32 camera being rotated.
2024-03-14 20:51:05 +00:00
circlip.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
circlips.scad
…
component.scad
MULTIWATT11 package now generates a BOM entry.
2023-10-30 17:47:25 +00:00
components.scad
…
corner_3d_connector.scad
added convexity to the linear extrude
2025-07-18 19:52:45 +02:00
corner_3d_connectors.scad
renamed variables + corrected horizontal directions
2025-07-15 23:13:09 +02:00
d_connector.scad
Added d_hole() module.
2024-03-14 21:02:20 +00:00
d_connectors.scad
Added DCONN37 connector
2024-09-10 23:11:04 +02:00
dip.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
display.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
displays.scad
Included pcbs.scad in displays.scad.
2025-04-15 11:31:46 +01:00
e3d.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
extrusion_bracket.scad
…
extrusion_brackets.scad
extrusion_corner_bracket_assembly() and extrusion_inner_corner_bracket() can now be passed the extrusion type.
2021-09-05 10:24:42 +01:00
extrusion.scad
Makerbeam work in progress
2025-06-28 13:17:56 -05:00
extrusions.scad
Makerbeam work in progress
2025-06-28 13:17:56 -05:00
fan.scad
…
fans.scad
25mm fans are actually 25.4, i.e. 1".
2020-09-06 11:55:58 +01:00
faston.scad
Fixed typo in comment.
2023-11-26 19:13:17 +00:00
fastons.scad
…
fuseholder.scad
Dome option added to nut to draw acorn nuts.
2024-02-10 01:11:54 +00:00
gear_motor.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
gear_motors.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
geared_stepper.scad
Can now specify a rotation angle for a geared_stepper's shaft.
2024-06-30 12:30:29 +01:00
geared_steppers.scad
Added 35BYGHJ75 geared stepper.
2021-04-25 00:07:22 +01:00
green_terminal.scad
Added axial diodes, radial transistors, discs and modules.
2023-07-28 10:39:07 +01:00
green_terminals.scad
…
hot_end.scad
…
hot_ends.scad
…
ht_pipe.scad
Fixed incorrect parameters passed to tube() in ht_pipe().
2024-10-07 17:50:20 +01:00
ht_pipes.scad
added more pipes and some cleanup
2024-10-06 14:46:40 +02:00
hygrometer.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
iec.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
iecs.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
insert.scad
Fixed thread bug on threaded inserts revealed by latest OpenSCAD snapshot.
2024-06-12 21:18:11 +01:00
inserts.scad
Add threaded inserts
2024-02-15 22:01:36 +01:00
jack.scad
Dome option added to nut to draw acorn nuts.
2024-02-10 01:11:54 +00:00
jhead.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
ldr.scad
…
ldrs.scad
…
leadnut.scad
…
leadnuts.scad
…
led_meter.scad
Updated images due to pixel differences on new PC
2023-11-26 23:29:32 +00:00
led_meters.scad
…
led.scad
Add rectangular LEDs
2024-10-17 13:36:18 +02:00
leds.scad
Add rectangular LEDs
2024-10-17 13:36:18 +02:00
light_strip.scad
…
light_strips.scad
…
linear_bearing.scad
open_bearing_theta() now derived from open_bearing_width().
2023-07-22 17:34:22 +01:00
linear_bearings.scad
open_bearing_theta() now derived from open_bearing_width().
2023-07-22 17:34:22 +01:00
magnet.scad
…
magnets.scad
…
mains_socket.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
mains_sockets.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
microswitch.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
microswitches.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
microview.scad
Single backtick now used for all code quotes.
2020-12-24 16:04:59 +00:00
module.scad
…
modules.scad
Added source code
2019-06-08 22:10:47 +01:00
nut.scad
Shortened the module comments by factoring out the parameter discriptions.
2025-03-27 00:50:21 +00:00
nuts.scad
Added rod_ends.scad to lib.scad and lib_test.scad.
2024-09-02 21:50:27 +01:00
o_ring.scad
…
opengrab.scad
…
panel_meter.scad
Spelling corrections.
2021-06-15 10:01:32 +01:00
panel_meters.scad
Added JST PH connectors.
2020-11-12 23:34:59 +00:00
pcb.scad
Added 1/4" square trimpot to pcb.scad
2025-04-11 11:27:14 -03:00
pcbs.scad
Add the Mellow Fly D5 PCB
2025-06-28 13:39:16 -05:00
photo_interrupter.scad
Fixed typos, corrected vitamin call, added boilerplate, updated images and readme.
2023-03-11 17:50:16 +00:00
photo_interrupters.scad
…
pillar.scad
Metal hex pillars now chamfered.
2024-02-10 12:21:17 +00:00
pillars.scad
Metal hex pillars now chamfered.
2024-02-10 12:21:17 +00:00
pillow_block.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pillow_blocks.scad
…
pin_header.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pin_headers.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
potentiometer.scad
Dome option added to nut to draw acorn nuts.
2024-02-10 01:11:54 +00:00
potentiometers.scad
Potentiometers now create a BOM entry and have a value specified.
2021-10-28 12:43:53 +01:00
psu.scad
Mods to allow the manifold experimetal option to be used.
2024-02-10 01:05:24 +00:00
psus.scad
…
pulley.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pulleys.scad
Added rod_ends.scad to lib.scad and lib_test.scad.
2024-09-02 21:50:27 +01:00
radial.scad
Removed trailing comma in let() for compatibility with last release.
2024-10-02 08:41:41 +01:00
radials.scad
Added rd_cm_choke(), rd_coil() and spiral_wrap().
2024-09-30 01:58:04 +01:00
rail.scad
…
rails.scad
Corrected HGH20CA carriage_pitch_x value.
2024-09-25 17:17:24 +02:00
ring_terminal.scad
…
ring_terminals.scad
…
rocker.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
rockers.scad
Add 10x15 micro rocker switches
2024-10-20 01:03:09 +02:00
rod_end.scad
Relative paths for vitamin rod_end includes
2024-10-02 06:56:25 -04:00
rod_ends.scad
Added rod_ends.scad to lib.scad and lib_test.scad.
2024-09-02 21:50:27 +01:00
rod.scad
…
sbr_rail.scad
open_bearing_theta() now derived from open_bearing_width().
2023-07-22 17:34:22 +01:00
sbr_rails.scad
Moved things around for better test images.
2023-07-22 16:37:35 +01:00
screw.scad
adding test code for weld nuts and rod ends, adding ball bearings to test code list, and updating code for dome screw heads to use an angle to determine inset distance of the lower taper
2024-08-23 14:32:03 -05:00
screws.scad
added chamfer distance variable to taper in the bottom of the dome heads
2024-08-16 16:49:04 -05:00
sealing_strip.scad
Removed the height parameter from linear_extrude
2020-03-29 20:18:57 +01:00
servo_motor.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
servo_motors.scad
…
shaft_coupling.scad
…
shaft_couplings.scad
…
sheet.scad
…
sheets.scad
Added Sellotape to sheets.
2024-03-14 20:58:54 +00:00
sk_bracket.scad
…
sk_brackets.scad
…
smd.scad
Added smd_250V_fuse() and rd_box_cap().
2024-08-15 22:52:32 +01:00
smds.scad
Added smd_250V_fuse() and rd_box_cap().
2024-08-15 22:52:32 +01:00
spade.scad
…
spades.scad
…
spool.scad
…
spools.scad
…
spring.scad
…
springs.scad
adding rod end bearing and a yellow bed spring
2024-08-14 10:05:45 -05:00
ssr.scad
…
ssrs.scad
…
stepper_motor.scad
updating after maybe breaking debian
2024-08-14 10:04:22 -05:00
stepper_motors.scad
updating after maybe breaking debian
2024-08-14 10:04:22 -05:00
swiss_clip.scad
…
swiss_clips.scad
Added Swiss clip.
2020-04-16 00:59:27 +01:00
terminal.scad
…
toggle.scad
…
toggles.scad
…
transformer.scad
…
transformers.scad
…
ttrack.scad
Improved layout to fit into front page view.
2024-02-19 19:03:20 +00:00
ttracks.scad
Improved layout to fit into front page view.
2024-02-19 19:03:20 +00:00
tubing.scad
A optional path can now be specified for tubing.
2024-04-21 10:26:28 +01:00
tubings.scad
…
variac.scad
…
variacs.scad
Added source code
2019-06-08 22:10:47 +01:00
veroboard.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
washer.scad
Washer now uses sweep.scad instead of including it, leaking its interface.
2024-04-21 10:18:34 +01:00
washers.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
wire.scad
Cable clips can now handle up to 9 wires, have the nut and bolt flipped or use an insert.
2024-02-18 23:51:30 +00:00
ziptie.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
zipties.scad
…