openscad/NopSCADlib
1
0
Fork 0
mirror of https://github.com/nophead/NopSCADlib.git synced 2025-09-03 04:12:35 +02:00
Code Issues Releases Wiki Activity
Files
v21.35.6
NopSCADlib/vitamins
History
Daniel Trnka 5d0eda87e4 barrel_jack: added cutout
2025-03-30 23:19:42 +02:00
..
microview
…
stl
Added can bus connectors to OpenGrab model.
2023-01-24 09:21:14 +00:00
7_segment.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
7_segments.scad
Single 7_segment objects can now have multiple digits.
2021-10-26 12:27:22 +01:00
antenna.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
antennas.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
axial.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
axials.scad
Added axial diodes, radial transistors, discs and modules.
2023-07-28 10:39:07 +01:00
ball_bearing.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
ball_bearings.scad
adding test code for weld nuts and rod ends, adding ball bearings to test code list, and updating code for dome screw heads to use an angle to determine inset distance of the lower taper
2024-08-23 14:32:03 -05:00
batteries.scad
Restored Lumintop colour to white and made text black on white batteries.
2024-10-10 00:14:58 +01:00
battery.scad
Restored Lumintop colour to white and made text black on white batteries.
2024-10-10 00:14:58 +01:00
bearing_block.scad
Rendred the 3D difference.
2023-07-22 16:36:11 +01:00
bearing_blocks.scad
Added SBR rails
2023-06-30 12:57:13 +02:00
belt.scad
Belt part number is not always the same as the pitch.
2024-01-12 22:30:34 +00:00
belts.scad
Added GT2x12, GT3x6, GT3x9 and GT3x12 belts.
2024-01-14 22:50:26 +00:00
bldc_motor.scad
Made includes relative in bldc_motors.
2022-06-30 13:34:32 +01:00
bldc_motors.scad
Added BLDC3548 motor.
2021-05-30 18:58:55 +01:00
blower.scad
Fixed blower_exit_offset() for square blowers with 2 screws.
2022-01-23 09:04:46 +00:00
blowers.scad
…
box_section.scad
Updated images and readme.
2021-04-13 14:56:08 +01:00
box_sections.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
bulldog.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
bulldogs.scad
…
button.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
buttons.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
cable_strip.scad
Ribbon clamps can now be made to hold multiple ribbons.
2022-01-29 13:57:40 +00:00
camera.scad
Added camera_lens_height() function.
2024-03-14 20:58:02 +00:00
cameras.scad
Fixed FOV for ESP32 camera being rotated.
2024-03-14 20:51:05 +00:00
circlip.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
circlips.scad
Added SBR rails
2023-06-30 12:57:13 +02:00
component.scad
MULTIWATT11 package now generates a BOM entry.
2023-10-30 17:47:25 +00:00
components.scad
Resistor and thermistor wires made more round.
2021-10-01 12:33:35 +01:00
d_connector.scad
Added d_hole() module.
2024-03-14 21:02:20 +00:00
d_connectors.scad
Added DCONN37 connector
2024-09-10 23:11:04 +02:00
dip.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
display.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
displays.scad
Reordered the display list into reducing height for better layout.
2024-02-04 22:56:09 +00:00
e3d.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
extrusion_bracket.scad
extrusion_corner_bracket_assembly() and extrusion_inner_corner_bracket() can now be passed the extrusion type.
2021-09-05 10:24:42 +01:00
extrusion_brackets.scad
extrusion_corner_bracket_assembly() and extrusion_inner_corner_bracket() can now be passed the extrusion type.
2021-09-05 10:24:42 +01:00
extrusion.scad
Set convexity to 8 for linear_extrude of extrusion.
2021-10-02 09:20:51 +01:00
extrusions.scad
Fixed dimensions of E1515 extrusion.
2022-06-21 08:32:13 +01:00
fan.scad
…
fans.scad
…
faston.scad
Fixed typo in comment.
2023-11-26 19:13:17 +00:00
fastons.scad
Added fastons.
2023-03-10 21:09:28 +00:00
fuseholder.scad
Dome option added to nut to draw acorn nuts.
2024-02-10 01:11:54 +00:00
gear_motor.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
gear_motors.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
geared_stepper.scad
Can now specify a rotation angle for a geared_stepper's shaft.
2024-06-30 12:30:29 +01:00
geared_steppers.scad
Added 35BYGHJ75 geared stepper.
2021-04-25 00:07:22 +01:00
green_terminal.scad
Added axial diodes, radial transistors, discs and modules.
2023-07-28 10:39:07 +01:00
green_terminals.scad
…
hot_end.scad
Added hot end style string literals following discussion.
2021-09-28 17:54:42 +01:00
hot_ends.scad
Added hot end style string literals following discussion.
2021-09-28 17:54:42 +01:00
ht_pipe.scad
Fixed incorrect parameters passed to tube() in ht_pipe().
2024-10-07 17:50:20 +01:00
ht_pipes.scad
added more pipes and some cleanup
2024-10-06 14:46:40 +02:00
hygrometer.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
iec.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
iecs.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
insert.scad
Fixed thread bug on threaded inserts revealed by latest OpenSCAD snapshot.
2024-06-12 21:18:11 +01:00
inserts.scad
Add threaded inserts
2024-02-15 22:01:36 +01:00
jack.scad
Dome option added to nut to draw acorn nuts.
2024-02-10 01:11:54 +00:00
jhead.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
ldr.scad
…
ldrs.scad
…
leadnut.scad
Leadnuts: add nuthousing
2022-09-27 21:50:28 +02:00
leadnuts.scad
Leadnuts: add nuthousing
2022-09-27 21:50:28 +02:00
led_meter.scad
Updated images due to pixel differences on new PC
2023-11-26 23:29:32 +00:00
led_meters.scad
…
led.scad
Add rectangular LEDs
2024-10-17 13:36:18 +02:00
leds.scad
Add rectangular LEDs
2024-10-17 13:36:18 +02:00
light_strip.scad
Spelling corrections.
2021-06-15 10:01:32 +01:00
light_strips.scad
…
linear_bearing.scad
open_bearing_theta() now derived from open_bearing_width().
2023-07-22 17:34:22 +01:00
linear_bearings.scad
open_bearing_theta() now derived from open_bearing_width().
2023-07-22 17:34:22 +01:00
magnet.scad
Allowed naming of magnets. Added radial encoder magnet.
2021-10-21 10:37:56 +01:00
magnets.scad
Allowed naming of magnets. Added radial encoder magnet.
2021-10-21 10:37:56 +01:00
mains_socket.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
mains_sockets.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
microswitch.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
microswitches.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
microview.scad
…
module.scad
Removed some unused dependencies.
2021-10-01 12:32:01 +01:00
modules.scad
…
nut.scad
Shortened the module comments by factoring out the parameter discriptions.
2025-03-27 00:50:21 +00:00
nuts.scad
Added rod_ends.scad to lib.scad and lib_test.scad.
2024-09-02 21:50:27 +01:00
o_ring.scad
…
opengrab.scad
Changed OpenGrab link as nicadrone.com has gone.
2023-01-28 20:15:15 +00:00
panel_meter.scad
Spelling corrections.
2021-06-15 10:01:32 +01:00
panel_meters.scad
…
pcb.scad
barrel_jack: added cutout
2025-03-30 23:19:42 +02:00
pcbs.scad
Updated images and readme.
2025-01-22 01:28:39 +00:00
photo_interrupter.scad
Fixed typos, corrected vitamin call, added boilerplate, updated images and readme.
2023-03-11 17:50:16 +00:00
photo_interrupters.scad
Fixed typos, corrected vitamin call, added boilerplate, updated images and readme.
2023-03-11 17:50:16 +00:00
pillar.scad
Metal hex pillars now chamfered.
2024-02-10 12:21:17 +00:00
pillars.scad
Metal hex pillars now chamfered.
2024-02-10 12:21:17 +00:00
pillow_block.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pillow_blocks.scad
Renamed kp_pillow_blocks files to pillow_blocks.
2021-03-06 16:13:09 +00:00
pin_header.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pin_headers.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
potentiometer.scad
Dome option added to nut to draw acorn nuts.
2024-02-10 01:11:54 +00:00
potentiometers.scad
Potentiometers now create a BOM entry and have a value specified.
2021-10-28 12:43:53 +01:00
psu.scad
Mods to allow the manifold experimetal option to be used.
2024-02-10 01:05:24 +00:00
psus.scad
Removed CB- prefix from PSU descriptions.
2022-01-25 20:02:13 +00:00
pulley.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pulleys.scad
Added rod_ends.scad to lib.scad and lib_test.scad.
2024-09-02 21:50:27 +01:00
radial.scad
Removed trailing comma in let() for compatibility with last release.
2024-10-02 08:41:41 +01:00
radials.scad
Added rd_cm_choke(), rd_coil() and spiral_wrap().
2024-09-30 01:58:04 +01:00
rail.scad
Corrected MGN12 rail end value.
2021-04-05 16:45:23 +01:00
rails.scad
Corrected HGH20CA carriage_pitch_x value.
2024-09-25 17:17:24 +02:00
ring_terminal.scad
Spelling corrections.
2021-06-15 10:01:32 +01:00
ring_terminals.scad
…
rocker.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
rockers.scad
Add 10x15 micro rocker switches
2024-10-20 01:03:09 +02:00
rod_end.scad
Relative paths for vitamin rod_end includes
2024-10-02 06:56:25 -04:00
rod_ends.scad
Added rod_ends.scad to lib.scad and lib_test.scad.
2024-09-02 21:50:27 +01:00
rod.scad
Spelling corrections.
2021-06-15 10:01:32 +01:00
sbr_rail.scad
open_bearing_theta() now derived from open_bearing_width().
2023-07-22 17:34:22 +01:00
sbr_rails.scad
Moved things around for better test images.
2023-07-22 16:37:35 +01:00
screw.scad
adding test code for weld nuts and rod ends, adding ball bearings to test code list, and updating code for dome screw heads to use an angle to determine inset distance of the lower taper
2024-08-23 14:32:03 -05:00
screws.scad
added chamfer distance variable to taper in the bottom of the dome heads
2024-08-16 16:49:04 -05:00
sealing_strip.scad
…
servo_motor.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
servo_motors.scad
Added Lichuan servo motors contributed by Niclas Hedhman.
2021-08-31 22:51:24 +01:00
shaft_coupling.scad
Shaft coupling: Add flexible SC / 6x8 flexible SC
2022-09-24 14:17:15 +02:00
shaft_couplings.scad
Shaft coupling: Add flexible SC / 6x8 flexible SC
2022-09-24 14:17:15 +02:00
sheet.scad
Fixed missing brackets for sheets with chamfered corners.
2022-02-25 10:27:23 +00:00
sheets.scad
Added Sellotape to sheets.
2024-03-14 20:58:54 +00:00
sk_bracket.scad
Removed some unused dependencies.
2021-10-01 12:32:01 +01:00
sk_brackets.scad
…
smd.scad
Added smd_250V_fuse() and rd_box_cap().
2024-08-15 22:52:32 +01:00
smds.scad
Added smd_250V_fuse() and rd_box_cap().
2024-08-15 22:52:32 +01:00
spade.scad
…
spades.scad
…
spool.scad
…
spools.scad
…
spring.scad
…
springs.scad
adding rod end bearing and a yellow bed spring
2024-08-14 10:05:45 -05:00
ssr.scad
…
ssrs.scad
…
stepper_motor.scad
updating after maybe breaking debian
2024-08-14 10:04:22 -05:00
stepper_motors.scad
updating after maybe breaking debian
2024-08-14 10:04:22 -05:00
swiss_clip.scad
…
swiss_clips.scad
…
terminal.scad
Added missing description for terminals.
2022-01-29 09:34:17 +00:00
toggle.scad
…
toggles.scad
…
transformer.scad
…
transformers.scad
…
ttrack.scad
Improved layout to fit into front page view.
2024-02-19 19:03:20 +00:00
ttracks.scad
Improved layout to fit into front page view.
2024-02-19 19:03:20 +00:00
tubing.scad
A optional path can now be specified for tubing.
2024-04-21 10:26:28 +01:00
tubings.scad
Added PTFE heatshrink sleeving.
2023-03-10 17:25:26 +00:00
variac.scad
…
variacs.scad
…
veroboard.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
washer.scad
Washer now uses sweep.scad instead of including it, leaking its interface.
2024-04-21 10:18:34 +01:00
washers.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
wire.scad
Cable clips can now handle up to 9 wires, have the nut and bolt flipped or use an insert.
2024-02-18 23:51:30 +00:00
ziptie.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
zipties.scad
…