mirror/Grbl_Esp32
1
0
Fork 0
mirror of https://github.com/bdring/Grbl_Esp32.git synced 2025-09-02 19:02:35 +02:00
Code Issues Releases Wiki Activity

Changed ISR attachment a bit. It should trigger on PinCapabilities, not PinAttributes

Browse Source
This commit is contained in:
Stefan de Bruijn
2020-10-28 08:48:52 +01:00
parent 5f1cad9dac
commit 463c92babf
4 changed files with 62 additions and 52 deletions
Download Patch File Download Diff File Expand all files Collapse all files

86
Grbl_Esp32/src/Grbl.cpp
View File

@@ -22,57 +22,66 @@
#include <WiFi.h>
void grbl_init() {
try {
#ifdef USE_I2S_OUT
i2s_out_init(); // The I2S out must be initialized before it can access the expanded GPIO port
i2s_out_init(); // The I2S out must be initialized before it can access the expanded GPIO port
#endif
WiFi.persistent(false);
WiFi.disconnect(true);
WiFi.enableSTA(false);
WiFi.enableAP(false);
WiFi.mode(WIFI_OFF);
serial_init(); // Setup serial baud rate and interrupts
grbl_msg_sendf(CLIENT_SERIAL, MsgLevel::Info, "Grbl_ESP32 Ver %s Date %s", GRBL_VERSION, GRBL_VERSION_BUILD); // print grbl_esp32 verion info
grbl_msg_sendf(CLIENT_SERIAL, MsgLevel::Info, "Compiled with ESP32 SDK:%s", ESP.getSdkVersion()); // print the SDK version
WiFi.persistent(false);
WiFi.disconnect(true);
WiFi.enableSTA(false);
WiFi.enableAP(false);
WiFi.mode(WIFI_OFF);
serial_init(); // Setup serial baud rate and interrupts
grbl_msg_sendf(
CLIENT_SERIAL, MsgLevel::Info, "Grbl_ESP32 Ver %s Date %s", GRBL_VERSION, GRBL_VERSION_BUILD); // print grbl_esp32 verion info
grbl_msg_sendf(CLIENT_SERIAL, MsgLevel::Info, "Compiled with ESP32 SDK:%s", ESP.getSdkVersion()); // print the SDK version
// show the map name at startup
#ifdef MACHINE_NAME
report_machine_type(CLIENT_SERIAL);
report_machine_type(CLIENT_SERIAL);
#endif
settings_init(); // Load Grbl settings from non-volatile storage
stepper_init(); // Configure stepper pins and interrupt timers
init_motors();
system_ini(); // Configure pinout pins and pin-change interrupt (Renamed due to conflict with esp32 files)
memset(sys_position, 0, sizeof(sys_position)); // Clear machine position.
settings_init(); // Load Grbl settings from non-volatile storage
stepper_init(); // Configure stepper pins and interrupt timers
init_motors();
system_ini(); // Configure pinout pins and pin-change interrupt (Renamed due to conflict with esp32 files)
memset(sys_position, 0, sizeof(sys_position)); // Clear machine position.
#ifdef USE_MACHINE_INIT
machine_init(); // user supplied function for special initialization
machine_init(); // user supplied function for special initialization
#endif
// Initialize system state.
// Initialize system state.
#ifdef FORCE_INITIALIZATION_ALARM
// Force Grbl into an ALARM state upon a power-cycle or hard reset.
sys.state = State::Alarm;
#else
sys.state = State::Idle;
#endif
// Check for power-up and set system alarm if homing is enabled to force homing cycle
// by setting Grbl's alarm state. Alarm locks out all g-code commands, including the
// startup scripts, but allows access to settings and internal commands. Only a homing
// cycle '$H' or kill alarm locks '$X' will disable the alarm.
// NOTE: The startup script will run after successful completion of the homing cycle, but
// not after disabling the alarm locks. Prevents motion startup blocks from crashing into
// things uncontrollably. Very bad.
#ifdef HOMING_INIT_LOCK
if (homing_enable->get()) {
// Force Grbl into an ALARM state upon a power-cycle or hard reset.
sys.state = State::Alarm;
}
#else
sys.state = State::Idle;
#endif
Spindles::Spindle::select();
// Check for power-up and set system alarm if homing is enabled to force homing cycle
// by setting Grbl's alarm state. Alarm locks out all g-code commands, including the
// startup scripts, but allows access to settings and internal commands. Only a homing
// cycle '$H' or kill alarm locks '$X' will disable the alarm.
// NOTE: The startup script will run after successful completion of the homing cycle, but
// not after disabling the alarm locks. Prevents motion startup blocks from crashing into
// things uncontrollably. Very bad.
#ifdef HOMING_INIT_LOCK
if (homing_enable->get()) {
sys.state = State::Alarm;
}
#endif
Spindles::Spindle::select();
#ifdef ENABLE_WIFI
WebUI::wifi_config.begin();
WebUI::wifi_config.begin();
#endif
#ifdef ENABLE_BLUETOOTH
WebUI::bt_config.begin();
WebUI::bt_config.begin();
#endif
WebUI::inputBuffer.begin();
WebUI::inputBuffer.begin();
} catch (const AssertionFailed& ex) {
// This means something is terribly broken:
grbl_sendf(CLIENT_ALL, "Critical error in run_once: %s", ex.stackTrace.c_str());
while (true) {
sleep(1000);
}
}
}
static void reset_variables() {
@@ -118,7 +127,10 @@ void run_once() {
protocol_main_loop();
} catch (const AssertionFailed& ex) {
// This means something is terribly broken:
grbl_sendf(CLIENT_ALL, "Critical error: %s", ex.stackTrace.c_str());
grbl_sendf(CLIENT_ALL, "Critical error in run_once: %s", ex.stackTrace.c_str());
while (true) {
sleep(1000);
}
}
}

20
Grbl_Esp32/src/PinUsers/Uart.cpp
View File

@@ -34,12 +34,12 @@ namespace PinUsers {
// Iterate options:
uart_config_t uart_config = { 0 };
int bufferSize = 128;
int bufferSize = 128;
for (auto opt : options) {
// if (opt.is("baud")) { baudRate = opt.valueInt(); }
// if (opt.is("mode")) { mode = opt.valueString(); /* 8N1 etc */ }
// if (opt.is("bufsize")) { mode = opt.valueString(); /* 128 etc */ }
// if (opt.is("protocol")) { protocol= opt.valueString(); /* RS485 etc */ }
// if (opt.is("baud")) { uart_config.baud_rate = opt.iValue(); }
// if (opt.is("mode")) { mode = opt.value(); /* 8N1 etc */ }
// if (opt.is("bufsize")) { mode = opt.iValue(); /* 128 etc */ }
// if (opt.is("protocol")) { protocol= opt.value(); /* RS485 etc */ }
// etc...
}
for (auto opt : userOptions) {
@@ -94,16 +94,14 @@ namespace PinUsers {
}
};
Uart::Uart(Pin tx, Pin rx, Pin rts, String config, String userConfig) {
Pins::PinOptionsParser configParser(config.begin(), config.end());
Uart::Uart(Pin tx, Pin rx, Pin rts, String config, String userConfig) {
Pins::PinOptionsParser configParser(config.begin(), config.end());
Pins::PinOptionsParser userConfigParser(userConfig.begin(), userConfig.end());
// Decide on the RX pin what to do:
if (rx.capabilities().has(Pin::Capabilities::Native))
{
if (rx.capabilities().has(Pin::Capabilities::Native)) {
this->_detail = new NativeUart(tx, rx, rts, configParser, userConfigParser);
}
else {
} else {
Assert(false, "Pin is not supported for UART.");
}
}

4
Grbl_Esp32/src/Pins/GPIOPinDetail.cpp
View File

@@ -161,12 +161,12 @@ namespace Pins {
}
void GPIOPinDetail::attachInterrupt(void (*callback)(void*), void* arg, int mode) {
Assert(_attributes.has(PinAttributes::ISR), "Pin has no ISR attribute defined. Cannot bind ISR.");
Assert(_capabilities.has(PinCapabilities::ISR), "Pin has no ISR capability defined. Cannot bind ISR.");
::attachInterruptArg(_index, callback, arg, mode);
}
void GPIOPinDetail::detachInterrupt() {
Assert(_attributes.has(PinAttributes::ISR), "Pin has no ISR attribute defined. Cannot unbind ISR.");
Assert(_capabilities.has(PinCapabilities::ISR), "Pin has no ISR capability defined. Cannot unbind ISR.");
::detachInterrupt(_index);
}

4
X86TestSupport/Arduino.h
View File

@@ -23,9 +23,9 @@
// GPIO FUNCTIONS
#define INPUT 0x01
#define OUTPUT 0x02
// #define PULLUP 0x04
#define PULLUP 0x04
#define INPUT_PULLUP 0x05
// #define PULLDOWN 0x08
#define PULLDOWN 0x08
#define INPUT_PULLDOWN 0x09
// #define OPEN_DRAIN 0x10
// #define OUTPUT_OPEN_DRAIN 0x12