mirror/Grbl_Esp32
1
0
Fork 0
mirror of https://github.com/bdring/Grbl_Esp32.git synced 2025-08-27 08:14:31 +02:00
Code Issues Releases Wiki Activity

Update lowrider_v1p2.h to define probe pin (#485)

Browse Source 
* Update lowrider_v1p2.h

Define missing probe pin.

* Add files via upload
This commit is contained in:
Cows2Computers
2020-07-19 08:22:41 -05:00
committed by GitHub
parent 22da3a1e77
commit 947ae88859
1 changed files with 15 additions and 14 deletions
Download Patch File Download Diff File Expand all files Collapse all files

29
Grbl_Esp32/Machines/lowrider_v1p2.h
View File

@@ -30,19 +30,19 @@
#define USE_GANGED_AXES // allow two motors on an axis
#define X_STEP_PIN GPIO_NUM_27 // use Z labeled connector
#define X_DIRECTION_PIN GPIO_NUM_33 // use Z labeled connector
#define Y_STEP_PIN GPIO_NUM_27 // use Z labeled connector
#define Y_DIRECTION_PIN GPIO_NUM_33 // use Z labeled connector
#define Y_STEP_PIN GPIO_NUM_14
#define Y2_STEP_PIN GPIO_NUM_21 // ganged motor
#define Y_DIRECTION_PIN GPIO_NUM_25
#define Y_AXIS_SQUARING
#define Z_STEP_PIN GPIO_NUM_12 // use X labeled connector
#define Z2_STEP_PIN GPIO_NUM_22 // use X labeled connector
#define Z_DIRECTION_PIN GPIO_NUM_26 // use X labeled connector
#define Z_STEP_PIN GPIO_NUM_14 // use Y labeled connector
#define Z2_STEP_PIN GPIO_NUM_21 // ganged motor
#define Z_DIRECTION_PIN GPIO_NUM_25 // use Y labeled connector
#define Z_AXIS_SQUARING
#define X_STEP_PIN GPIO_NUM_12 // use X labeled connector
#define X2_STEP_PIN GPIO_NUM_22 // ganged motor
#define X_DIRECTION_PIN GPIO_NUM_26 // use X labeled connector
#define X_AXIS_SQUARING
// OK to comment out to use pin for other features
#define STEPPERS_DISABLE_PIN GPIO_NUM_13
@@ -55,16 +55,16 @@
#else
#define SPINDLE_TYPE SPINDLE_TYPE_PWM
#define SPINDLE_OUTPUT_PIN GPIO_NUM_16
#define SPINDLE_ENABLE_PIN GPIO_NUM_32
#define SPINDLE_ENABLE_PIN GPIO_NUM_32
#endif
// Note: Only uncomment this if USE_SPINDLE_RELAY is commented out.
// Relay can be used for Spindle or Coolant
//#define COOLANT_FLOOD_PIN GPIO_NUM_17
#define X_LIMIT_PIN GPIO_NUM_15
#define Y_LIMIT_PIN GPIO_NUM_4
#define Z_LIMIT_PIN GPIO_NUM_17
#define Y_LIMIT_PIN GPIO_NUM_15
#define Z_LIMIT_PIN GPIO_NUM_4
#define X_LIMIT_PIN GPIO_NUM_17
#define LIMIT_MASK B111
@@ -72,6 +72,7 @@
#define ENABLE_SOFTWARE_DEBOUNCE
#endif
#define PROBE_PIN GPIO_NUM_35
// The default value in config.h is wrong for this controller
#ifdef INVERT_CONTROL_PIN_MASK