Guide_3DS/docs/de_DE/installing-boot9strap-(ntrboot).md

Installing boot9strap (ntrboot)

Required Reading

To use the magnet links on this page, you will need a torrent client like qBittorrent or Deluge.

What You Need

• A magnet that triggers the sleep mode of your console (if using a folding style console)
• Your ntrboot flashed flashcart
• The latest release of SafeB9SInstaller (direct download)
• The latest release of boot9strap (direct download)
• The latest release of Luma3DS (the Luma3DS .zip file)

Instructions

Section I - Prep Work

1. Power off your console

2. Insert your console's SD card into your computer

   • This is the SD card from your 3DS, not the SD card from your flashcart

3. Copy SafeB9SInstaller.firm from the SafeB9SInstaller .zip to the root of your SD card and rename it to boot.firm

   • The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it

4. Create a folder named boot9strap on the root of your console's SD card

5. Copy boot9strap.firm and boot9strap.firm.sha from the boot9strap .zip to the /boot9strap/ folder on your console's SD card

   ::: info

   

   :::

6. Reinsert your SD card into your console

7. Power on your console

Section II - ntrboot

1. Use the magnet to find the spot on your console where the sleep sensor is triggered
   • This step is not needed on the old 2DS (which has a sleep mode switch)
2. Power off your console
3. Insert your flashcart into your console
4. Place the magnet on your console to trigger the sleep sensor
   • On old 2DS, you should instead enable the sleep mode switch
5. Halte (Start) + (Select) + (X) + (Powerknopf) für mehrere Sekunden gedrückt und lass sie danach wieder los
   • It may take a few attempts to get this to work because the positioning is awkward
6. Wenn der Exploit erfolgreich war, wird SafeBS9Installer gestartet
7. Remove the magnet from your console
   • On old 2DS, you should instead disable the sleep mode switch

Section III - Installing boot9strap

In this section, you will install custom firmware onto your console.

1. Wenn du gebeten wirst, eine Tastenkombination einzugeben, gib die Tastenkombination auf dem oberen Bildschirm ein, um boot9strap zu installieren
   • If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
2. Once it is completed, force your console to power off by holding down the power button
   • Your console will only boot to the SafeB9SInstaller screen until the next section is completed

Section IV - Configuring Luma3DS

1. Insert your console's SD card into your computer
2. Lösche boot.firm aus dem Stammverzeichnis deiner SD-Karte
3. Copy everything from the Luma3DS .zip to the root of your SD card
4. Reinsert your SD card into your console
5. Power on your console

---

::: tip

Continue to Finalizing Setup

:::

---

Das Folgende ist optional und erlaubt es dir, deine Flashkarte in den Ursprungszustand zu versetzen (für das Verwenden ihrer Standardfunktionen).

Beachte, dass die Acekard 2i ihre Fähigkeit behält, .nds-Dateien zu starten, selbst während der ntrboot-Exploit installiert ist. Dies gilt nur, wenn die Acekard 2i in einem NDS oder einem 3DS mit Custom Firmware ist! Während der ntrboot-Exploit auf der Acekard 2i installiert ist, kann diese keine .nds-Dateien auf DSi oder unmodifizierten 3DS-Konsolen starten.

Folge diesen Schritten erst, wenn du den Rest der Anweisungen auf dieser Seite abgeschlossen hast.

Section V - Removing ntrboot

What You Need

• The latest release of ntrboot_flasher (ntrboot_flasher.firm)
• The flashrom backup corresponding to your flashcart
  • Note that if you followed Flashing ntrboot (3DS Multi System), the flashrom backup already exists in the correct location and does not need to be downloaded
  • Note that if you followed Flashing ntrboot (3DS Single System) or Flashing ntrboot (NDS), the flashrom backup already exists on your flashcart's SD card and should be copied to the location specified below
  • If you do not know which HW revision you have, just try each for your cart of them. Only the correct one will allow your flashcart to launch properly from the HOME Menu, but flashing the wrong one will not brick the cart

Flashcart	Hardware Revision	Flashrom
Ace3DS X		N/A
Acekard 2i	HW 81	- Acekard_2i_(HW_81)-Flashrom.zip
Acekard 2i	HW 44	- Acekard_2i_(HW_44)-Flashrom.zip
DSTT		Missing
Infinity 3 R4i	HW A5	- R4i_Gold_3DS_(HW_A5)-Flashrom.zip
R4 3D Revolution	HW A6	- R4i_Gold_3DS_(HW_A6)-Flashrom.zip
R4i Gold 3DS Deluxe "Starter"		Missing
R4i Gold 3DS	HW 4	- R4i_Gold_3DS_(HW_4)-Flashrom.zip
R4i Gold 3DS	HW 5	Missing
R4i Gold 3DS	HW 6	Missing
R4i Gold 3DS	HW 7	Missing
R4i Gold 3DS	HW 8	- R4i_Gold_3DS_(HW_8)-Flashrom.zip
R4i Gold 3DS	HW D	- R4i_Gold_3DS_(HW_D)-Flashrom.zip
R4i Gold 3DS Plus		N/A
R4i Gold 3DS RTS	HW A5	- R4i_Gold_3DS_(HW_A5)-Flashrom.zip
R4i Gold 3DS RTS	HW A6	- R4i_Gold_3DS_(HW_A6)-Flashrom.zip
R4i Gold 3DS RTS	HW A7	- R4i_Gold_3DS_(HW_A7)-Flashrom.zip
R4i Ultra		- R4i_Ultra-Flashrom.zip
R4i-SDHC 3DS RTS		- R4i-SDHC_3DS_RTS_B9S-Flashrom.zip
R4i-SDHC B9S		- R4i-SDHC_3DS_RTS_B9S-Flashrom.zip
R4iSDHC GOLD Pro 20XX from r4isdhc .com		- R4iSDHC.com_20XX-Flashrom.zip
R4iSDHC RTS LITE 20XX from r4isdhc .com		- R4iSDHC.com_20XX-Flashrom.zip
R4iSDHC Dual-Core 20XX from r4isdhc .com		- R4iSDHC.com_20XX-Flashrom.zip

Instructions

1. Power off your console
2. Stecke deine SD-Karte in deinen Computer
   • This is the SD card from your 3DS, not the SD card from your flashcart
3. Erstelle einen Ordner mit dem Namen ntrboot im Stammverzeichnis deiner SD-Karte
4. Kopiere die .bin-Datei von deiner Flashrom-Backup .zip in den Ordner /ntrboot/ auf dem Stammverzeichnis der SD-Karte
5. Erstelle einen Ordner mit dem Namen payloads im luma-Ordner auf deiner SD-Karte
6. Kopiere ntrboot_flasher.firm in den /luma/payloads Ordner der SD-Karte
7. Reinsert your SD card into your console
8. Insert your ntrboot compatible DS / DSi flashcart into your console
9. Starte ntrboot_flasher, indem du während dem Starten deiner Konsole die Taste (Start) gedrückt hältst
10. Lies die rote Warnung auf dem Bildschirm
11. Drücke (A), um fortzufahren
12. Wähle deine Flashcart aus
    • If you do not see your flashcart in the list at the top, read the bottom screen for more info on each option
13. Wähle "Restore Flash"
14. Drücke (A), um fortzufahren
15. Warte bis der Prozess beendet ist
16. Drücke (A), um zum Hauptmenü zurückzukehren
17. Press (B) to power off your console