Guide_3DS/docs/zh_TW/a9lh-to-b9s.md

A9LH to B9S

Required Reading

This page is for existing arm9loaderhax users to update their consoles to boot9strap.

未來所有的 Luma3DS 版本都將以 .firm 形式推出，且此格式僅相容於 boot9strap 以及 sighax。 也就是說，如果您想要繼續使用最新版的 Luma3DS，您應透過本章節來更新您的主機。

What You Need

::: warning

To use the magnet links on this page, you will need a torrent client like qBittorrent or Deluge.

:::

::: info

請注意，只有在使用 New 3DS 時，secret_sector.bin 是用來還原 arm9loaderhax 漏洞用的，這也就是為什麼在原廠主機上安裝 boot9strap 時不會用到它。 若您的主機不是 New 3DS 的機型，您則不需要使用 secret_sector.bin。

:::

• - New 3DS Users Only: secret_sector.bin (magnet link)
• The latest release of Luma3DS (the Luma3DS .zip file)
• The v7.0.5 release of Luma3DS (direct download)
• The latest release of SafeB9SInstaller (direct download)
• The latest release of boot9strap (direct download)

Instructions

Section I - Prep Work

::: info

在本節中，請覆蓋所有 SD 卡中可能相衝的檔案。

:::

1. Power off your console

2. 將 SD 卡插入至電腦中

3. Copy everything from Luma3DS .zip to the root of your SD card

   • The root of the SD card refers to the initial directory on your SD card where you can see the Nintendo 3DS folder, but are not inside of it

4. Copy arm9loaderhax.bin from the v7.0.5 Luma3DS .zip to the root of your SD card

5. 解壓 SafeB9SInstaller.zip 中的 SafeB9SInstaller.bin 到 SD 中的 /luma/payloads/ 下

   • If the luma or payloads folder doesn't exist, create them
   • Delete any other existing .bin payloads (GodMode9.bin, Decrypt9WIP.bin, Hourglass9.bin, etc.) in the /luma/payloads/ folder on your SD card as they will not be compatible with boot9strap compatible Luma3DS versions

6. 在 SD 卡的根目錄底下建立一個新的資料夾 boot9strap

7. 解壓 boot9strap .zip 的 boot9strap.firm 及 boot9strap.firm.sha 檔案至 SD 卡的 /boot9strap/ 資料夾中

8. **僅限 New 3DS 使用者：**將 secret_sector.bin 複製到 SD 卡的 /boot9strap/ 資料夾中

   ::: info

   

   :::

9. Reinsert your SD card into your console

Section II - Installing boot9strap

1. Boot your console while holding (Start) to launch SafeB9SInstaller
   • If you see the luma configuration screen instead of SafeB9SInstaller, simply press (Start), then shut down your 3DS and try again
   • If this gives you an error, try either using a new SD card or formatting your current SD card (backup existing files first)
2. 等待所有的安全性檢查檢查完畢
   • If you get an "OTP Crypto Fail" error, download - aeskeydb.bin, then put it in the /boot9strap/ folder on your SD card and try again
3. When prompted, input the key combo given on the top screen to install boot9strap
   • If a step on the lower screen has red-colored text, and you are not prompted to input a key combo, follow this troubleshooting guide
4. Once it is complete, press (A) to reboot your console
5. Your console should have rebooted into the Luma3DS configuration menu
   • Luma3DS configuration menu are settings for the Luma3DS custom firmware. Many of these settings may be useful for customization or debugging
   • For the purpose of this guide, these settings will be left on default settings
   • If you get a black screen, follow this troubleshooting guide
6. 按『Start』鍵以存檔並重新啟動系統

---

::: tip

Continue to Finalizing Setup

:::