mirror/slic3r-settings
1
0
Fork 0
mirror of https://github.com/prusa3d/Slic3r-settings.git synced 2025-08-30 00:49:53 +02:00
Code Issues Releases Wiki Activity

Moved MK1 settings to an old directory, merged the MK2S,MK2MM and MK3 settings

Browse Source
This commit is contained in:
jindrichbenes
2017-12-21 16:18:50 +01:00
parent 3d512fae00
commit 0b3ebe1d83
120 changed files with 2243 additions and 2452 deletions
Download Patch File Download Diff File Expand all files Collapse all files

116
Slic3r settings MK2/simple.ini
View File

@@ -1,116 +0,0 @@
# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
avoid_crossing_perimeters = 1
bed_shape = 0x0,200x0,200x200,0x200
bed_temperature = 0
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 1
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors
external_fill_pattern = rectilinear
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 2.95
fill_angle = 45
fill_density = 30%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_bed_temperature = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.4
first_layer_speed = 30%
first_layer_temperature = 0
gap_fill_speed = 20
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 10
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 60
interface_shells = 0
layer_gcode =
layer_height = 0.3
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
min_skirt_length = 0
notes =
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 0.6
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 30
small_perimeter_speed = 30
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0 F1000.0\nG1 Y100.0 E2.3 F1000.0\nG92 Z[layer_height]\nG92 E0.0
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 0
temperature = 0
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 100
use_firmware_retraction = 0
use_relative_e_distances = 0
wipe = 0
z_offset = 0

24
Slic3r settings MK2/slic3r.ini
View File

@@ -1,24 +0,0 @@
# generated by Slic3r 1.35.3.3-prusa3d-win64 on Wed Jun 14 13:38:56 2017
autocenter =
background_processing = 0
last_output_path = C:\Users\Jindřich Beneš\Desktop
main_frame_maximized =
main_frame_pos = 69,42
main_frame_size = 900,623
mode = expert
no_controller = 1
no_defaults = 1
version = 1.35.3.3-prusa3d-win64
version_check = 1
[presets]
filament = Prusa PLA 1.75mm.ini
filament_1 = Prusa PLA 1.75mm
filament_2 = Prusa PLA 1.75mm
filament_3 = Prusa PLA 1.75mm
print = 0.15mm OPTIMAL.ini
printer = Original Prusa i3 MK2 with ZHop.ini
[recent]
config_directory = C:\Users\Jindřich Beneš\Desktop
skein_directory = C:\Users\Jindřich Beneš\Desktop\dual extrusion konkurence

26
Slic3r settings MK2MM/filament/ColorFabb HT 1.75mm.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.37.0.7-prusa3d-win64 on Thu Aug 17 13:04:36 2017
bed_temperature = 105
bridge_fan_speed = 30
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 10
filament_colour = #ACFDF8
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = PET
first_layer_bed_temperature = 105
first_layer_temperature = 270
max_fan_speed = 20
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 8
start_filament_gcode = "; Filament gcode\n"
temperature = 270

26
Slic3r settings MK2MM/filament/ColorFabb PLA-PHA.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:42:47 2017
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 55
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 25
start_filament_gcode = "; Filament gcode\n"
temperature = 210

18
Slic3r settings MK2MM/filament/ColorFabb Woodfill 1.75mm.ini
View File

@@ -1,18 +0,0 @@
# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
bed_temperature = 50
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1.2
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #5A4110
filament_diameter = 1.75
filament_settings_id =
first_layer_bed_temperature = 50
first_layer_temperature = 200
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 5
slowdown_below_layer_time = 20
temperature = 200

26
Slic3r settings MK2MM/filament/ColorFabb XT 1.75mm.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.37.0.7-prusa3d-win64 on Thu Aug 17 13:05:28 2017
bed_temperature = 65
bridge_fan_speed = 50
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #A36FFD
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = PET
first_layer_bed_temperature = 90
first_layer_temperature = 240
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
temperature = 240

24
Slic3r settings MK2MM/filament/ColorFabb XT-CF20 1.75mm.ini
View File

@@ -1,24 +0,0 @@
# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
bed_temperature = 90
bridge_fan_speed = 50
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1.2
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #000000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 1
filament_notes =
filament_soluble = 0
filament_type = PET
first_layer_bed_temperature = 90
first_layer_temperature = 260
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 15
temperature = 260

24
Slic3r settings MK2MM/filament/ColorFabb nGen 1.75mm.ini
View File

@@ -1,24 +0,0 @@
# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:26:24 2017
bed_temperature = 85
bridge_fan_speed = 40
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 10
filament_colour = #ACFDF8
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = NGEN
first_layer_bed_temperature = 85
first_layer_temperature = 240
max_fan_speed = 35
min_fan_speed = 20
min_print_speed = 5
slowdown_below_layer_time = 8
temperature = 240

26
Slic3r settings MK2MM/filament/E3D Edge.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:47:49 2017
bed_temperature = 90
bridge_fan_speed = 50
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #B5F5FD
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes =
filament_settings_id =
filament_soluble = 0
filament_type = PET
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
temperature = 240

26
Slic3r settings MK2MM/filament/E3D PC-ABS 1.75mm.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.37.0.7-prusa3d-win64 on Fri Aug 25 14:29:32 2017
bed_temperature = 100
bridge_fan_speed = 30
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #3A80CA
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 270
max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
temperature = 270

24
Slic3r settings MK2MM/filament/Fillamentum ABS 1.75mm.ini
View File

@@ -1,24 +0,0 @@
# generated by Slic3r 1.35.0.23-prusa3d-win64 on Mon Jun 5 15:23:45 2017
bed_temperature = 100
bridge_fan_speed = 30
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #3A80CA
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 240
max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 15
temperature = 240

26
Slic3r settings MK2MM/filament/Fillamentum CPE HG100 HM100.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.37.0.7-prusa3d-win64 on Tue Aug 29 15:46:46 2017
bed_temperature = 90
bridge_fan_speed = 50
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #B5F5FD
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = "CPE HG100 , CPE HM100"
filament_settings_id =
filament_soluble = 0
filament_type = PET
first_layer_bed_temperature = 90
first_layer_temperature = 260
max_fan_speed = 80
min_fan_speed = 80
min_print_speed = 5
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
temperature = 260

22
Slic3r settings MK2MM/filament/Fillamentum Timberfil.ini
View File

@@ -1,22 +0,0 @@
# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1.2
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
first_layer_bed_temperature = 55
first_layer_temperature = 190
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 25
temperature = 190

19
Slic3r settings MK2MM/filament/Generic ABS 1.75mm.ini
View File

@@ -1,19 +0,0 @@
# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
bed_temperature = 100
bridge_fan_speed = 30
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #3A80CA
filament_diameter = 1.75
filament_settings_id =
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 15
temperature = 255

26
Slic3r settings MK2MM/filament/Generic PET 1.75mm.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:43:21 2017
bed_temperature = 90
bridge_fan_speed = 50
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #B5F5FD
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
filament_settings_id =
filament_soluble = 0
filament_type = PET
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
temperature = 240

26
Slic3r settings MK2MM/filament/Generic PLA 1.75mm.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 11:42:47 2017
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 55
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 25
start_filament_gcode = "; Filament gcode\n"
temperature = 210

24
Slic3r settings MK2MM/filament/Primaselect PVA.ini
View File

@@ -1,24 +0,0 @@
# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:11:57 2017
bed_temperature = 55
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFD1A4
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = "List of materials tested with standart PVA print settings for MK2:\n\nPrimaSelect PVA+\nICE FILAMENTS PVA 'NAUGHTY NATURAL'\nVerbatim BVOH"
filament_settings_id =
filament_soluble = 1
filament_type = PVA
first_layer_bed_temperature = 55
first_layer_temperature = 195
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 25
temperature = 195

24
Slic3r settings MK2MM/filament/Prusa ABS 1.75mm.ini
View File

@@ -1,24 +0,0 @@
# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:02 2017
bed_temperature = 100
bridge_fan_speed = 30
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #3A80CA
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = "List of materials tested with standart ABS print settings for MK2:\n\nEsun ABS\nFil-A-Gehr ABS\nHatchboxABS\nPlasty Mladeč ABS"
filament_settings_id =
filament_soluble = 0
filament_type = ABS
first_layer_bed_temperature = 100
first_layer_temperature = 255
max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 15
temperature = 255

26
Slic3r settings MK2MM/filament/Prusa HIPS 1.75mm.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:14 2017
bed_temperature = 100
bridge_fan_speed = 50
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 0.9
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFE130
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = HIPS
first_layer_bed_temperature = 100
first_layer_temperature = 220
max_fan_speed = 20
min_fan_speed = 20
min_print_speed = 5
slowdown_below_layer_time = 5
start_filament_gcode = "; Filament gcode\n"
temperature = 220

24
Slic3r settings MK2MM/filament/Prusa PET 1.75mm.ini
View File

@@ -1,24 +0,0 @@
# generated by Slic3r 1.34.1.35-prusa3d-win64 on Thu May 18 10:20:09 2017
bed_temperature = 90
bridge_fan_speed = 50
cooling = 1
disable_fan_first_layers = 3
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #B5F5FD
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = "List of manufacturers tested with standart PET print settings for MK2:\n\nE3D Edge\nFillamentum CPE GH100\nPlasty Mladeč PETG"
filament_settings_id =
filament_soluble = 0
filament_type = PET
first_layer_bed_temperature = 85
first_layer_temperature = 230
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 15
temperature = 240

24
Slic3r settings MK2MM/filament/Prusa PLA 1.75mm.ini
View File

@@ -1,24 +0,0 @@
# generated by Slic3r 1.34.1.39-prusa3d-win64 on Mon May 22 10:12:50 2017
bed_temperature = 55
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 55
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 25
temperature = 210

26
Slic3r settings MK2MM/filament/Taulman T-Glase 1.75mm.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.37.0.39-prusa3d-win64 on Fri Sep 8 16:04:45 2017
bed_temperature = 90
bridge_fan_speed = 40
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #FD0200
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = PET
first_layer_bed_temperature = 90
first_layer_temperature = 240
max_fan_speed = 5
min_fan_speed = 0
min_print_speed = 5
slowdown_below_layer_time = 15
start_filament_gcode = "; Filament gcode\n"
temperature = 240

26
Slic3r settings MK2MM/filament/Verbatim BVOH.ini
View File

@@ -1,26 +0,0 @@
# generated by Slic3r 1.35.5.16-prusa3d-win64 on Thu Jul 6 09:59:30 2017
bed_temperature = 55
bridge_fan_speed = 100
cooling = 0
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 0
filament_notes = "List of materials tested with standart PLA print settings for MK2:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladeč PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 55
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 25
start_filament_gcode = "; Filament gcode\n"
temperature = 210

116
Slic3r settings MK2MM/simple.ini
View File

@@ -1,116 +0,0 @@
# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:45 2017
avoid_crossing_perimeters = 1
bed_shape = 0x0,200x0,200x200,0x200
bed_temperature = 0
bottom_solid_layers = 3
bridge_acceleration = 0
bridge_fan_speed = 100
bridge_flow_ratio = 1
bridge_speed = 60
brim_width = 0
complete_objects = 0
cooling = 1
default_acceleration = 0
disable_fan_first_layers = 1
dont_support_bridges = 1
duplicate_distance = 6
end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors
external_fill_pattern = rectilinear
external_perimeter_speed = 70%
external_perimeters_first = 0
extra_perimeters = 1
extruder_clearance_height = 20
extruder_clearance_radius = 20
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0
fan_always_on = 0
fan_below_layer_time = 60
filament_diameter = 2.95
fill_angle = 45
fill_density = 30%
fill_pattern = rectilinear
first_layer_acceleration = 0
first_layer_bed_temperature = 0
first_layer_extrusion_width = 200%
first_layer_height = 0.4
first_layer_speed = 30%
first_layer_temperature = 0
gap_fill_speed = 20
gcode_comments = 0
gcode_flavor = reprap
infill_acceleration = 0
infill_every_layers = 10
infill_extruder = 1
infill_extrusion_width = 0
infill_first = 0
infill_only_where_needed = 0
infill_speed = 60
interface_shells = 0
layer_gcode =
layer_height = 0.3
max_fan_speed = 100
min_fan_speed = 35
min_print_speed = 10
min_skirt_length = 0
notes =
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 1
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 0
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 30
perimeters = 3
post_process =
raft_layers = 0
resolution = 0
retract_before_travel = 2
retract_layer_change = 1
retract_length = 0.6
retract_length_toolchange = 10
retract_lift = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
seam_position = aligned
skirt_distance = 6
skirt_height = 1
skirts = 1
slowdown_below_layer_time = 30
small_perimeter_speed = 30
solid_infill_below_area = 70
solid_infill_every_layers = 0
solid_infill_extrusion_width = 0
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0 F1000.0\nG1 Y100.0 E2.3 F1000.0\nG92 Z[layer_height]\nG92 E0.0
support_material = 0
support_material_angle = 0
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0
support_material_interface_extruder = 1
support_material_interface_layers = 3
support_material_interface_spacing = 0
support_material_interface_speed = 100%
support_material_pattern = pillars
support_material_spacing = 2.5
support_material_speed = 60
support_material_threshold = 0
temperature = 0
thin_walls = 1
threads = 2
toolchange_gcode =
top_infill_extrusion_width = 0
top_solid_infill_speed = 50
top_solid_layers = 3
travel_speed = 100
use_firmware_retraction = 0
use_relative_e_distances = 0
wipe = 0
z_offset = 0

24
Slic3r settings MK2MM/slic3r.ini
View File

@@ -1,24 +0,0 @@
# generated by Slic3r 1.34.1.24-prusa3d-win64 on Wed Jun 14 13:41:34 2017
autocenter =
background_processing = 0
last_output_path = C:\Users\Jindřich Beneš\Desktop\dual extrusion konkurence
main_frame_maximized =
main_frame_pos = 47,69
main_frame_size = 1060,675
mode = expert
no_controller = 1
no_defaults = 1
version = 1.34.1.24-prusa3d-win64
version_check = 1
[presets]
filament = Prusa PLA 1.75mm.ini
filament_1 = Prusa PLA 1.75mm
filament_2 = Prusa PLA 1.75mm
filament_3 = Prusa PLA 1.75mm
print = 0.20mm NORMAL.ini
printer = Original Prusa i3 MK2 MultiMaterial.ini
[recent]
config_directory = C:\Users\Jindřich Beneš\Desktop
skein_directory = C:\Users\Jindřich Beneš\Desktop\dual extrusion konkurence

11
Slic3r settings MK2/filament/ColorFabb Brass Bronze 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Brass Bronze 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
bed_temperature = 50
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:59:23
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition = nozzle_diameter[0]>0.35
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1.3
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #B79A39
filament_colour = #804040
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -17,11 +18,11 @@ filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 50
first_layer_bed_temperature = 60
first_layer_temperature = 210
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 210

7
Slic3r settings MK2/filament/ColorFabb HT 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb HT 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:49:09
bed_temperature = 105
bridge_fan_speed = 30
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 10
filament_colour = #ACFDF8
filament_colour = #FF8000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 20
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K45 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
temperature = 270

11
Slic3r settings MK2/filament/ColorFabb PLA-PHA.ini → Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb PLA-PHA.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
bed_temperature = 55
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:49:28
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_colour = #FF3232
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -17,11 +18,11 @@ filament_notes = "List of materials tested with standart PLA print settings for
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 55
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 210

11
Slic3r settings MK2/filament/ColorFabb Woodfil 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb Woodfil 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
bed_temperature = 50
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:59:34
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition = nozzle_diameter[0]>0.35
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1.2
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #5A4110
filament_colour = #804040
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -17,11 +18,11 @@ filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 50
first_layer_bed_temperature = 60
first_layer_temperature = 200
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 200

13
Slic3r settings MK2/filament/ColorFabb XT 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
bed_temperature = 65
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:49:53
bed_temperature = 90
bridge_fan_speed = 50
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #A36FFD
filament_colour = #FF8000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -18,10 +19,10 @@ filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 90
first_layer_temperature = 240
first_layer_temperature = 260
max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K45 ; Filament gcode"
temperature = 240
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
temperature = 270

9
Slic3r settings MK2/filament/ColorFabb XT-CF20 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb XT-CF20 1.75mm.ini
View File

@@ -1,19 +1,20 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:05
bed_temperature = 90
bridge_fan_speed = 50
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1.2
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #000000
filament_colour = #804040
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 1
filament_notes =
filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = PET
@@ -23,5 +24,5 @@ max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 260

7
Slic3r settings MK2/filament/ColorFabb nGen 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:19
bed_temperature = 85
bridge_fan_speed = 40
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 10
filament_colour = #ACFDF8
filament_colour = #FF8000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 35
min_fan_speed = 20
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K45 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
temperature = 240

7
Slic3r settings MK2/filament/ColorFabb nGen flex.ini → Slic3r settings MK2S MK2MM and MK3/filament/ColorFabb nGen flex.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:31
bed_temperature = 85
bridge_fan_speed = 40
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 10
filament_colour = #ACFDF8
filament_colour = #FF8000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 35
min_fan_speed = 20
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 260

7
Slic3r settings MK2/filament/E3D Edge.ini → Slic3r settings MK2S MK2MM and MK3/filament/E3D Edge.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:45
bed_temperature = 90
bridge_fan_speed = 50
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #B5F5FD
filament_colour = #FF8000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K45 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
temperature = 240

5
Slic3r settings MK2/filament/E3D PC-ABS 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/E3D PC-ABS 1.75mm.ini
View File

@@ -1,7 +1,8 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:50:54
bed_temperature = 100
bridge_fan_speed = 30
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
@@ -23,5 +24,5 @@ max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 270

5
Slic3r settings MK2/filament/Fillamentum ABS 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ABS 1.75mm.ini
View File

@@ -1,7 +1,8 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:07
bed_temperature = 100
bridge_fan_speed = 30
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
@@ -23,5 +24,5 @@ max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 240

7
Slic3r settings MK2/filament/Fillamentum ASA 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum ASA 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:19
bed_temperature = 100
bridge_fan_speed = 30
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #FF8000
filament_colour = #3A80CA
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 265

7
Slic3r settings MK2/filament/Fillamentum CPE HG100 HM100.ini → Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum CPE HG100 HM100.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:33
bed_temperature = 90
bridge_fan_speed = 50
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #B5F5FD
filament_colour = #FF8000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 80
min_fan_speed = 80
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K45 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
temperature = 260

11
Slic3r settings MK2/filament/Fillamentum Timberfil.ini → Slic3r settings MK2S MK2MM and MK3/filament/Fillamentum Timberfil.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
bed_temperature = 55
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 16:00:00
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition = nozzle_diameter[0]>0.35
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1.2
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_colour = #804040
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -17,11 +18,11 @@ filament_notes = ""
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 55
first_layer_bed_temperature = 60
first_layer_temperature = 190
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 190

5
Slic3r settings MK2/filament/Generic ABS 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Generic ABS 1.75mm.ini
View File

@@ -1,7 +1,8 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:51:54
bed_temperature = 100
bridge_fan_speed = 30
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
@@ -23,5 +24,5 @@ max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 255

7
Slic3r settings MK2/filament/Generic PET 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Generic PET 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:04
bed_temperature = 90
bridge_fan_speed = 50
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #B5F5FD
filament_colour = #FF8000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K45 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
temperature = 240

11
Slic3r settings MK2/filament/Generic PLA 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Generic PLA 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
bed_temperature = 55
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:16
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_colour = #FF3232
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -17,11 +18,11 @@ filament_notes = "List of materials tested with standart PLA print settings for
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 55
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 210

5
Slic3r settings MK2/filament/Polymaker PC-Max.ini → Slic3r settings MK2S MK2MM and MK3/filament/Polymaker PC-Max.ini
View File

@@ -1,7 +1,8 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:26
bed_temperature = 120
bridge_fan_speed = 30
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
@@ -23,5 +24,5 @@ max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 270

11
Slic3r settings MK2/filament/Primavalue PVA.ini → Slic3r settings MK2S MK2MM and MK3/filament/Primavalue PVA.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
bed_temperature = 55
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:38
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FFD1A4
filament_colour = #FFFFD7
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -17,11 +18,11 @@ filament_notes = "List of materials tested with standart PVA print settings for
filament_settings_id =
filament_soluble = 1
filament_type = PVA
first_layer_bed_temperature = 55
first_layer_bed_temperature = 60
first_layer_temperature = 195
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 195

5
Slic3r settings MK2/filament/Prusa ABS 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Prusa ABS 1.75mm.ini
View File

@@ -1,7 +1,8 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:48
bed_temperature = 100
bridge_fan_speed = 30
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
@@ -23,5 +24,5 @@ max_fan_speed = 30
min_fan_speed = 10
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 255

7
Slic3r settings MK2/filament/Prusa HIPS 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Prusa HIPS 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:52:59
bed_temperature = 100
bridge_fan_speed = 50
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 0.9
fan_always_on = 1
fan_below_layer_time = 10
filament_colour = #FFE130
filament_colour = #FFFFD7
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 20
min_fan_speed = 20
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 220

7
Slic3r settings MK2/filament/Prusa PET 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Prusa PET 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:08
bed_temperature = 90
bridge_fan_speed = 50
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #B5F5FD
filament_colour = #FF8000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 50
min_fan_speed = 30
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K45 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}45{endif}; Filament gcode"
temperature = 240

11
Slic3r settings MK2/filament/Prusa PLA 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Prusa PLA 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
bed_temperature = 55
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:18
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_colour = #FF3232
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -17,11 +18,11 @@ filament_notes = "List of materials tested with standart PLA print settings for
filament_settings_id =
filament_soluble = 0
filament_type = PLA
first_layer_bed_temperature = 55
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 210

7
Slic3r settings MK2/filament/SemiFlex or Flexfill 98A.ini → Slic3r settings MK2S MK2MM and MK3/filament/SemiFlex or Flexfill 98A.ini
View File

@@ -1,7 +1,8 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 16:00:18
bed_temperature = 50
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition = nozzle_diameter[0]>0.35 and num_extruders==1
cooling = 0
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
@@ -12,7 +13,7 @@ filament_colour = #00CA0A
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_max_volumetric_speed = 5
filament_max_volumetric_speed = 2.5
filament_notes = "List of materials tested with FLEX print settings & FLEX material settings for MK2:\n\nFillamentum Flex 98A\nFillamentum Flex 92A\nPlasty Mladeč PP\nPlasty Mladeč TPE32 \nPlasty Mladeč TPE88"
filament_settings_id =
filament_soluble = 0
@@ -23,5 +24,5 @@ max_fan_speed = 90
min_fan_speed = 70
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 230

5
Slic3r settings MK2/filament/Taulman Bridge 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Taulman Bridge 1.75mm.ini
View File

@@ -1,7 +1,8 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:38
bed_temperature = 50
bridge_fan_speed = 40
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
@@ -23,5 +24,5 @@ max_fan_speed = 5
min_fan_speed = 0
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 250

7
Slic3r settings MK2/filament/Taulman T-Glase 1.75mm.ini → Slic3r settings MK2S MK2MM and MK3/filament/Taulman T-Glase 1.75mm.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:47
bed_temperature = 90
bridge_fan_speed = 40
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 3
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #FD0200
filament_colour = #FF8000
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 5
min_fan_speed = 0
min_print_speed = 5
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K30 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}30{endif}; Filament gcode"
temperature = 240

11
Slic3r settings MK2/filament/Verbatim BVOH.ini → Slic3r settings MK2S MK2MM and MK3/filament/Verbatim BVOH.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
bed_temperature = 55
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:53:58
bed_temperature = 60
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
cooling = 0
disable_fan_first_layers = 1
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_colour = #FFFFD7
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -17,11 +18,11 @@ filament_notes = "List of materials tested with standart PLA print settings for
filament_settings_id =
filament_soluble = 1
filament_type = PLA
first_layer_bed_temperature = 55
first_layer_bed_temperature = 60
first_layer_temperature = 215
max_fan_speed = 100
min_fan_speed = 85
min_print_speed = 15
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 210

7
Slic3r settings MK2/filament/Verbatim PP.ini → Slic3r settings MK2S MK2MM and MK3/filament/Verbatim PP.ini
View File

@@ -1,14 +1,15 @@
# generated by Slic3r 1.37.1.25-prusa3d-win64 on
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:54:08
bed_temperature = 100
bridge_fan_speed = 100
compatible_printers =
compatible_printers_condition =
cooling = 1
disable_fan_first_layers = 2
end_filament_gcode = "; Filament-specific end gcode"
extrusion_multiplier = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #FF14E2
filament_colour = #DEE0E6
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
@@ -23,5 +24,5 @@ max_fan_speed = 100
min_fan_speed = 100
min_print_speed = 15
slowdown_below_layer_time = 10
start_filament_gcode = "M900 K10 ; Filament gcode"
start_filament_gcode = "M900 K{if printer_notes=~/.*PRINTER_HAS_BOWDEN.*/}200{else}10{endif}; Filament gcode"
temperature = 220

6
Slic3r settings MK2/print/0.05mm DETAIL 0.25 nozzle.ini → Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL 0.25 nozzle.ini
View File

@@ -1,14 +1,18 @@
# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:46:47 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:35:08
avoid_crossing_perimeters = 0
bottom_solid_layers = 10
bridge_acceleration = 300
bridge_angle = 0
bridge_flow_ratio = 0.7
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25 and num_extruders==1
complete_objects = 0
default_acceleration = 500
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0

56
Slic3r settings MK2/print/0.20mm SemiFlex or Flexfill98A.ini → Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL MK3.ini
View File

@@ -1,14 +1,18 @@
# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:47:25 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:29:11
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_flow_ratio = 0.95
bottom_solid_layers = 10
bridge_acceleration = 300
bridge_angle = 0
bridge_flow_ratio = 0.7
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
complete_objects = 0
default_acceleration = 1000
default_acceleration = 500
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.45
@@ -19,25 +23,25 @@ extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.45
fill_angle = 45
fill_density = 10%
fill_density = 25%
fill_pattern = cubic
first_layer_acceleration = 1000
first_layer_acceleration = 500
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 20
gcode_comments = 0
infill_acceleration = 2000
infill_acceleration = 800
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_extrusion_width = 0.5
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 20
infill_speed = 30
interface_shells = 0
layer_height = 0.2
max_print_speed = 100
layer_height = 0.05
max_print_speed = 80
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
@@ -47,11 +51,11 @@ only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 0
perimeter_acceleration = 800
perimeter_acceleration = 300
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 20
perimeters = 2
perimeter_speed = 30
perimeters = 3
post_process =
print_settings_id =
raft_layers = 0
@@ -60,39 +64,39 @@ seam_position = nearest
skirt_distance = 2
skirt_height = 3
skirts = 1
small_perimeter_speed = 20
small_perimeter_speed = 15
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 20
solid_infill_speed = 30
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.3
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.35
support_material_extrusion_width = 0.3
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 20
support_material_spacing = 1.5
support_material_speed = 30
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_walls = 0
threads = 4
top_infill_extrusion_width = 0.4
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 20
top_solid_layers = 5
travel_speed = 120
top_solid_layers = 15
travel_speed = 180
wipe_tower = 0
wipe_tower_per_color_wipe = 15
wipe_tower_width = 60

6
Slic3r settings MK2/print/0.05mm DETAIL.ini → Slic3r settings MK2S MK2MM and MK3/print/0.05mm DETAIL.ini
View File

@@ -1,14 +1,18 @@
# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:46:42 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:54:48
avoid_crossing_perimeters = 0
bottom_solid_layers = 10
bridge_acceleration = 300
bridge_angle = 0
bridge_flow_ratio = 0.7
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
complete_objects = 0
default_acceleration = 500
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.45

6
Slic3r settings MK2/print/0.10mm DETAIL 0.25 nozzle.ini → Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL 0.25 nozzle.ini
View File

@@ -1,14 +1,18 @@
# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:46:57 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:37:04
avoid_crossing_perimeters = 0
bottom_solid_layers = 7
bridge_acceleration = 600
bridge_angle = 0
bridge_flow_ratio = 0.7
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.25

105
Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL MK3.ini Normal file
View File

@@ -0,0 +1,105 @@
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:29:38
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 30
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 40
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.45
fill_angle = 45
fill_density = 20%
fill_pattern = cubic
first_layer_acceleration = 1000
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 40
gcode_comments = 0
infill_acceleration = 3500
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 35%
infill_speed = 200
interface_shells = 0
layer_height = 0.1
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 0
perimeter_acceleration = 800
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 60
perimeters = 2
post_process =
print_settings_id =
raft_layers = 0
resolution = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 3
skirts = 1
small_perimeter_speed = 20
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 200
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_walls = 0
threads = 4
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50
top_solid_layers = 5
travel_speed = 250
wipe_tower = 0
wipe_tower_per_color_wipe = 15
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0

6
Slic3r settings MK2/print/0.10mm DETAIL.ini → Slic3r settings MK2S MK2MM and MK3/print/0.10mm DETAIL.ini
View File

@@ -1,14 +1,18 @@
# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:46:52 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:55:16
avoid_crossing_perimeters = 0
bottom_solid_layers = 7
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.7
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders==1
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.45

4
Slic3r settings MK2/print/0.15mm 100mms Linear Advance.ini → Slic3r settings MK2S MK2MM and MK3/print/0.15mm 100mms Linear Advance.ini
View File

@@ -1,4 +1,4 @@
# generated by Slic3r Prusa Edition 1.38.0.28-prusa3d-CPP_presets-win64 on 2017-11-21 at 16:18:46
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:57:50
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 1000
@@ -7,6 +7,8 @@ bridge_flow_ratio = 0.95
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1

105
Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.25 nozzle.ini Normal file
View File

@@ -0,0 +1,105 @@
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:38:12
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 600
bridge_angle = 0
bridge_flow_ratio = 0.7
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.25
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.25
external_perimeter_speed = 20
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.25
fill_angle = 45
fill_density = 20%
fill_pattern = cubic
first_layer_acceleration = 1000
first_layer_extrusion_width = 0.25
first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 40
gcode_comments = 0
infill_acceleration = 1600
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.25
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 40
interface_shells = 0
layer_height = 0.15
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes =
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 0
perimeter_acceleration = 600
perimeter_extruder = 1
perimeter_extrusion_width = 0.25
perimeter_speed = 25
perimeters = 2
post_process =
print_settings_id =
raft_layers = 0
resolution = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 3
skirts = 1
small_perimeter_speed = 10
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.25
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 1
support_material_extrusion_width = 0.2
support_material_interface_contact_loops = 0
support_material_interface_extruder = 1
support_material_interface_layers = 0
support_material_interface_spacing = 0.15
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 1
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 35
support_material_with_sheath = 0
support_material_xy_spacing = 150%
thin_walls = 0
threads = 4
top_infill_extrusion_width = 0.25
top_solid_infill_speed = 30
top_solid_layers = 7
travel_speed = 120
wipe_tower = 1
wipe_tower_per_color_wipe = 15
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0

5
Slic3r settings MK2/print/0.15mm OPTIMAL 0.6 nozzle.ini → Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL 0.6 nozzle.ini
View File

@@ -1,11 +1,14 @@
# generated by Slic3r 1.36.2-prusa3d-win64 on Thu Aug 3 16:02:36 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:38:26
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1

38
Slic3r settings MK2MM/print/0.15mm OPTIMAL.ini → Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL MK3.ini
View File

@@ -1,18 +1,22 @@
# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:53:54 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:29:48
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 20
bridge_speed = 30
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 25
external_perimeter_speed = 40
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
@@ -27,17 +31,17 @@ first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 40
gcode_comments = 0
infill_acceleration = 2000
infill_acceleration = 3500
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
infill_overlap = 35%
infill_speed = 200
interface_shells = 0
layer_height = 0.15
max_print_speed = 100
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
@@ -50,8 +54,8 @@ overhangs = 0
perimeter_acceleration = 800
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 40
perimeters = 3
perimeter_speed = 60
perimeters = 2
post_process =
print_settings_id =
raft_layers = 0
@@ -65,13 +69,13 @@ solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 40
solid_infill_speed = 200
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
@@ -86,13 +90,13 @@ support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 120%
support_material_xy_spacing = 60%
thin_walls = 0
threads = 4
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 30
top_solid_layers = 7
travel_speed = 120
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 50
top_solid_layers = 5
travel_speed = 250
wipe_tower = 1
wipe_tower_per_color_wipe = 15
wipe_tower_width = 60

5
Slic3r settings MK2MM/print/0.15mm OPTIMAL SOLUBLE FULL.ini → Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE FULL.ini
View File

@@ -1,11 +1,14 @@
# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:53:54 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:38:56
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1

5
Slic3r settings MK2MM/print/0.15mm OPTIMAL SOLUBLE INTERFACE.ini → Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL SOLUBLE INTERFACE.ini
View File

@@ -1,11 +1,14 @@
# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:53:54 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:39:18
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1

6
Slic3r settings MK2/print/0.15mm OPTIMAL.ini → Slic3r settings MK2S MK2MM and MK3/print/0.15mm OPTIMAL.ini
View File

@@ -1,14 +1,18 @@
# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:47:02 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:37:56
avoid_crossing_perimeters = 0
bottom_solid_layers = 5
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.45

4
Slic3r settings MK2/print/0.20mm 100mms Linear Advance.ini → Slic3r settings MK2S MK2MM and MK3/print/0.20mm 100mms Linear Advance.ini
View File

@@ -1,4 +1,4 @@
# generated by Slic3r Prusa Edition 1.38.0.28-prusa3d-CPP_presets-win64 on 2017-11-15 at 14:00:36
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:39:43
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 1000
@@ -7,6 +7,8 @@ bridge_flow_ratio = 0.95
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1

5
Slic3r settings MK2/print/0.20mm NORMAL 0.6 nozzle.ini → Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL 0.6 nozzle.ini
View File

@@ -1,11 +1,14 @@
# generated by Slic3r 1.36.2-prusa3d-win64 on Thu Aug 3 16:05:41 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:40:18
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1

32
Slic3r settings MK2MM/print/0.20mm NORMAL.ini → Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL MK3.ini
View File

@@ -1,18 +1,22 @@
# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:54:05 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:30:01
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_flow_ratio = 0.95
bridge_speed = 20
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 30
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 30
external_perimeter_speed = 40
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
@@ -27,17 +31,17 @@ first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 40
gcode_comments = 0
infill_acceleration = 2000
infill_acceleration = 3500
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
infill_overlap = 35%
infill_speed = 200
interface_shells = 0
layer_height = 0.2
max_print_speed = 100
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
@@ -50,7 +54,7 @@ overhangs = 0
perimeter_acceleration = 800
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_speed = 40
perimeter_speed = 60
perimeters = 2
post_process =
print_settings_id =
@@ -65,13 +69,13 @@ solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 40
solid_infill_speed = 200
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
@@ -86,13 +90,13 @@ support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 120%
support_material_xy_spacing = 60%
thin_walls = 0
threads = 4
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 30
top_solid_infill_speed = 50
top_solid_layers = 5
travel_speed = 120
travel_speed = 250
wipe_tower = 1
wipe_tower_per_color_wipe = 15
wipe_tower_width = 60

5
Slic3r settings MK2MM/print/0.20mm NORMAL SOLUBLE FULL.ini → Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE FULL.ini
View File

@@ -1,11 +1,14 @@
# generated by Slic3r 1.35.5.16-prusa3d-win64 on Mon Jul 3 09:28:31 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:57:25
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1

5
Slic3r settings MK2MM/print/0.20mm NORMAL SOLUBLE INTERFACE.ini → Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL SOLUBLE INTERFACE.ini
View File

@@ -1,11 +1,14 @@
# generated by Slic3r 1.36.0-prusa3d-win64 on Fri Jul 21 09:00:11 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:40:49
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4 and num_extruders>1
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1

6
Slic3r settings MK2/print/0.20mm NORMAL.ini → Slic3r settings MK2S MK2MM and MK3/print/0.20mm NORMAL.ini
View File

@@ -1,14 +1,18 @@
# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:47:19 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:39:58
avoid_crossing_perimeters = 0
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.45

5
Slic3r settings MK2/print/0.35mm FAST 0.6 nozzle.ini → Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST 0.6 nozzle.ini
View File

@@ -1,11 +1,14 @@
# generated by Slic3r 1.36.2-prusa3d-win64 on Thu Aug 3 16:03:47 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:27
avoid_crossing_perimeters = 0
bottom_solid_layers = 7
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1

36
Slic3r settings MK2MM/print/0.35mm FAST.ini → Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST MK3.ini
View File

@@ -1,18 +1,22 @@
# generated by Slic3r 1.34.1.24-prusa3d-win64 on Tue Jun 13 16:54:10 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:30:18
avoid_crossing_perimeters = 0
bottom_solid_layers = 3
bottom_solid_layers = 4
bridge_acceleration = 1000
bridge_flow_ratio = 0.95
bridge_speed = 20
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 30
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK3.*/
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 30
external_perimeter_speed = 40
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
@@ -27,17 +31,17 @@ first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 40
gcode_comments = 0
infill_acceleration = 2000
infill_acceleration = 3500
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.7
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
infill_overlap = 35%
infill_speed = 200
interface_shells = 0
layer_height = 0.35
max_print_speed = 100
max_print_speed = 250
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
@@ -49,8 +53,8 @@ output_filename_format = [input_filename_base].gcode
overhangs = 0
perimeter_acceleration = 800
perimeter_extruder = 1
perimeter_extrusion_width = 0.43
perimeter_speed = 40
perimeter_extrusion_width = 0.45
perimeter_speed = 60
perimeters = 2
post_process =
print_settings_id =
@@ -65,13 +69,13 @@ solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.7
solid_infill_speed = 60
solid_infill_speed = 200
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0.2
support_material_contact_distance = 0.15
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
@@ -86,13 +90,13 @@ support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 45
support_material_with_sheath = 0
support_material_xy_spacing = 120%
support_material_xy_spacing = 60%
thin_walls = 0
threads = 4
top_infill_extrusion_width = 0.43
top_infill_extrusion_width = 0.45
top_solid_infill_speed = 50
top_solid_layers = 4
travel_speed = 120
travel_speed = 250
wipe_tower = 1
wipe_tower_per_color_wipe = 15
wipe_tower_width = 60

105
Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol full 0.6 nozzle.ini Normal file
View File

@@ -0,0 +1,105 @@
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:51
avoid_crossing_perimeters = 0
bottom_solid_layers = 3
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 30
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.67
fill_angle = 45
fill_density = 20%
fill_pattern = cubic
first_layer_acceleration = 1000
first_layer_extrusion_width = 0.65
first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 40
gcode_comments = 0
infill_acceleration = 2000
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.75
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
interface_shells = 0
layer_height = 0.35
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 800
perimeter_extruder = 1
perimeter_extrusion_width = 0.65
perimeter_speed = 40
perimeters = 2
post_process =
print_settings_id =
raft_layers = 0
resolution = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 3
skirts = 0
small_perimeter_speed = 20
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0
support_material_enforce_layers = 0
support_material_extruder = 4
support_material_extrusion_width = 0.55
support_material_interface_contact_loops = 0
support_material_interface_extruder = 4
support_material_interface_layers = 3
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 1
support_material_threshold = 80
support_material_with_sheath = 0
support_material_xy_spacing = 120%
thin_walls = 0
threads = 4
top_infill_extrusion_width = 0.57
top_solid_infill_speed = 50
top_solid_layers = 4
travel_speed = 120
wipe_tower = 1
wipe_tower_per_color_wipe = 20
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0

105
Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST sol int 0.6 nozzle.ini Normal file
View File

@@ -0,0 +1,105 @@
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:58
avoid_crossing_perimeters = 0
bottom_solid_layers = 3
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.8
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.6 and num_extruders>1
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.6
external_perimeter_speed = 30
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 20
extruder_clearance_radius = 20
extrusion_width = 0.67
fill_angle = 45
fill_density = 20%
fill_pattern = cubic
first_layer_acceleration = 1000
first_layer_extrusion_width = 0.65
first_layer_height = 0.2
first_layer_speed = 30
gap_fill_speed = 40
gcode_comments = 0
infill_acceleration = 2000
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.75
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
interface_shells = 0
layer_height = 0.35
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = Set your solluble extruder in Multiple Extruders > Support material/raft interface extruder
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = [input_filename_base].gcode
overhangs = 1
perimeter_acceleration = 800
perimeter_extruder = 1
perimeter_extrusion_width = 0.65
perimeter_speed = 40
perimeters = 2
post_process =
print_settings_id =
raft_layers = 0
resolution = 0
seam_position = nearest
skirt_distance = 2
skirt_height = 3
skirts = 0
small_perimeter_speed = 20
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.65
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
support_material = 1
support_material_angle = 0
support_material_buildplate_only = 0
support_material_contact_distance = 0
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.55
support_material_interface_contact_loops = 0
support_material_interface_extruder = 4
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 1
support_material_threshold = 80
support_material_with_sheath = 0
support_material_xy_spacing = 150%
thin_walls = 0
threads = 4
top_infill_extrusion_width = 0.57
top_solid_infill_speed = 50
top_solid_layers = 4
travel_speed = 120
wipe_tower = 1
wipe_tower_per_color_wipe = 20
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
xy_size_compensation = 0

6
Slic3r settings MK2/print/0.35mm FAST.ini → Slic3r settings MK2S MK2MM and MK3/print/0.35mm FAST.ini
View File

@@ -1,14 +1,18 @@
# generated by Slic3r 1.35.3-prusa3d-win64 on Tue Jun 13 16:47:30 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:41:11
avoid_crossing_perimeters = 0
bottom_solid_layers = 3
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 20
brim_width = 0
clip_multipart_objects = 1
compatible_printers =
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_PRUSA3D.*/ and printer_notes=~/.*PRINTER_MODEL_MK2.*/ and nozzle_diameter[0]==0.4
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
elefant_foot_compensation = 0
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeter_extrusion_width = 0.6

9
Slic3r settings MK2/printer/Original Prusa i3 MK2 0.25 nozzle.ini → Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.25 nozzle.ini
View File

@@ -1,6 +1,7 @@
# generated by Slic3r 1.34.1.20-prusa3d-win64 on Fri May 12 15:34:46 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:46:48
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
between_objects_gcode =
deretract_speed = 0
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
extruder_colour = #FFFF00
@@ -12,15 +13,15 @@ min_layer_height = 0.05
nozzle_diameter = 0.25
octoprint_apikey =
octoprint_host =
printer_notes =
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
printer_settings_id =
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 3
retract_lift = 0.5
retract_lift_above = 1
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0

9
Slic3r settings MK2/printer/Original Prusa i3 MK2 0.6 nozzle.ini → Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 0.6 nozzle.ini
View File

@@ -1,6 +1,7 @@
# generated by Slic3r 1.36.2-prusa3d-win64 on Thu Aug 3 16:00:43 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:46:53
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
between_objects_gcode =
deretract_speed = 0
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
extruder_colour = #FFFF00
@@ -12,15 +13,15 @@ min_layer_height = 0.1
nozzle_diameter = 0.6
octoprint_apikey =
octoprint_host =
printer_notes =
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
printer_settings_id =
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 3
retract_lift = 0.5
retract_lift_above = 1
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0

13
Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini → Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode 0.6 nozzle.ini
View File

@@ -1,7 +1,8 @@
# generated by Slic3r 1.35.5-prusa3d-win64 on Thu Jul 6 12:55:27 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-20 at 11:34:25
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
deretract_speed = 0
between_objects_gcode =
deretract_speed = 50
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
extruder_colour = #FFAA55
extruder_offset = 0x0
@@ -12,14 +13,14 @@ min_layer_height = 0.07
nozzle_diameter = 0.6
octoprint_apikey =
octoprint_host =
printer_notes =
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
printer_settings_id =
retract_before_travel = 3
retract_before_wipe = 0%
retract_before_wipe = 60%
retract_layer_change = 0
retract_length = 4
retract_length_toolchange = 6
retract_lift = 0.5
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
@@ -33,6 +34,6 @@ toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 0
variable_layer_height = 1
wipe = 1
z_offset = 0

13
Slic3r settings MK2/printer/Original Prusa i3 MK2 MM Single Mode.ini → Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MM Single Mode.ini
View File

@@ -1,7 +1,8 @@
# generated by Slic3r 1.35.5-prusa3d-win64 on Thu Jul 6 12:55:27 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-20 at 11:34:34
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
deretract_speed = 0
between_objects_gcode =
deretract_speed = 50
end_gcode = G1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
extruder_colour = #FFAA55
extruder_offset = 0x0
@@ -12,14 +13,14 @@ min_layer_height = 0.07
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
printer_notes =
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
printer_settings_id =
retract_before_travel = 3
retract_before_wipe = 0%
retract_before_wipe = 60%
retract_layer_change = 0
retract_length = 4
retract_length_toolchange = 6
retract_lift = 0.5
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
@@ -33,6 +34,6 @@ toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 0
variable_layer_height = 1
wipe = 1
z_offset = 0

15
Slic3r settings MK2MM/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini → Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini
View File

@@ -1,8 +1,9 @@
# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 13:22:12 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:47:43
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
deretract_speed = 0,0,0,0
end_gcode = M107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
between_objects_gcode =
deretract_speed = 50,50,50,50
end_gcode = {if not has_wipe_tower}\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n
extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
extruder_offset = 0x0,0x0,0x0,0x0
gcode_flavor = reprap
@@ -12,23 +13,23 @@ min_layer_height = 0.07,0.07,0.07,0.07
nozzle_diameter = 0.6,0.6,0.6,0.6
octoprint_apikey =
octoprint_host =
printer_notes =
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
printer_settings_id =
retract_before_travel = 3,3,3,3
retract_before_wipe = 60%,60%,60%,60%
retract_layer_change = 0,0,0,0
retract_length = 4,4,4,4
retract_length_toolchange = 4,4,4,4
retract_lift = 0.5,0.5,0.5,0.5
retract_lift = 0.6,0.6,0.6,0.6
retract_lift_above = 0,0,0,0
retract_lift_below = 199,199,199,199
retract_restart_extra = 0,0,0,0
retract_restart_extra_toolchange = 0,0,0,0
retract_speed = 50,50,50,50
retract_speed = 80,80,80,80
serial_port =
serial_speed = 250000
single_extruder_multi_material = 1
start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG92 E0.0\nM900 K100
start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1

16
Slic3r settings MK2MM/printer/Original Prusa i3 MK2 MultiMaterial.ini → Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2 MultiMaterial.ini
View File

@@ -1,8 +1,9 @@
# generated by Slic3r 1.35.0.22-prusa3d-win64 on Thu Jun 1 11:02:50 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:47:34
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
deretract_speed = 0,0,0,0
end_gcode = M107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors\n\n
between_objects_gcode =
deretract_speed = 50,50,50,50
end_gcode = {if not has_wipe_tower}\n; Pull the filament into the cooling tubes.\nG1 E-4 F2100.00000\nG91\nG1 Z1 F7200.000\nG90\nG1 X245 Y1\nG1 X240 E4\nG1 F4000\nG1 X190 E2.7 \nG1 F4600\nG1 X110 E2.8\nG1 F5200\nG1 X40 E3 \nG1 E-15.0000 F5000\nG1 E-50.0000 F5400\nG1 E-15.0000 F3000\nG1 E-12.0000 F2000\nG1 F1600\nG1 X0 Y1 E3.0000\nG1 X50 Y1 E-5.0000\nG1 F2000\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-5.0000\nG1 F2400\nG1 X0 Y1 E5.0000\nG1 X50 Y1 E-3.0000\nG4 S0\n{endif}\nM107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0 ; home X axis\nM84 ; disable motors
extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
extruder_offset = 0x0,0x0,0x0,0x0
gcode_flavor = reprap
@@ -12,24 +13,23 @@ min_layer_height = 0.07,0.07,0.07,0.07
nozzle_diameter = 0.4,0.4,0.4,0.4
octoprint_apikey =
octoprint_host =
printer_notes =
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\nPRINTER_HAS_BOWDEN
printer_settings_id =
retract_before_travel = 3,3,3,3
retract_before_wipe = 60%,60%,60%,60%
retract_layer_change = 0,0,0,0
retract_length = 4,4,4,4
retract_length_toolchange = 4,4,4,4
retract_lift = 0.5,0.5,0.5,0.5
retract_lift = 0.6,0.6,0.6,0.6
retract_lift_above = 0,0,0,0
retract_lift_below = 199,199,199,199
retract_restart_extra = 0,0,0,0
retract_restart_extra_toolchange = 0,0,0,0
retract_speed = 50,50,50,50
retract_speed = 80,80,80,80
serial_port =
serial_speed = 250000
set_and_wait_temperatures = 0
single_extruder_multi_material = 1
start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG92 E0.0\nM900 K200
start_gcode = M115 U3.1.0 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100 ; set max feedrate\nM92 E140 ; E-steps per filament milimeter\n{if not has_wipe_tower}\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0 F1000.0\nG1 X160.0 E20.0 F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\n{endif}\nG92 E0.0
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1

10
Slic3r settings MK2/printer/Original Prusa i3 MK2.ini → Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK2.ini
View File

@@ -1,6 +1,7 @@
# generated by Slic3r 1.35.0.23-prusa3d-win64 on Tue Jun 6 11:50:10 2017
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:32:13
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
between_objects_gcode =
deretract_speed = 0
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
extruder_colour = #FFFF00
@@ -12,22 +13,21 @@ min_layer_height = 0.07
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
printer_notes =
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK2\n
printer_settings_id =
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 3
retract_lift = 0.5
retract_lift_above = 1
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 199
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
serial_port =
serial_speed = 250000
set_and_wait_temperatures = 0
single_extruder_multi_material = 0
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
toolchange_gcode =

38
Slic3r settings MK2S MK2MM and MK3/printer/Original Prusa i3 MK3.ini Normal file
View File

@@ -0,0 +1,38 @@
# generated by Slic3r Prusa Edition 1.38.4 on 2017-12-19 at 15:26:13
bed_shape = 0x0,250x0,250x210,0x210
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
between_objects_gcode =
deretract_speed = 0
end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = reprap
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
max_layer_height = 0.25
min_layer_height = 0.07
nozzle_diameter = 0.4
octoprint_apikey =
octoprint_host =
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_MK3\n
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 0.8
retract_length_toolchange = 3
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 209
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
serial_port =
serial_speed = 250000
single_extruder_multi_material = 0
start_gcode = M115 U3.1.0 ; tell printer latest fw version\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside print area\nG92 E0.0\nG1 X60.0 E9.0 F1000.0 ; intro line\nG1 X100.0 E12.5 F1000.0 ; intro line\nG92 E0.0
toolchange_gcode =
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0

24
Slic3r settings MK2S MK2MM and MK3/slic3r.ini Normal file
View File

@@ -0,0 +1,24 @@
# generated by Slic3r Prusa Edition 1.38.0.35-prusa3d-win64 on 2017-11-27 at 08:53:50
autocenter = 0
background_processing = 0
last_output_path = C:\Users\Jindřich Beneš\Desktop
main_frame_maximized = 1
main_frame_pos = -8,-8
main_frame_size = 1936,1066
mode = expert
no_controller = 1
no_defaults = 1
object_settings_pos = 68,45
object_settings_size = 1309,822
show_incompatible_presets = 1
version = 1.38.0.35-prusa3d-win64
version_check = 1
[presets]
filament = Prusa PLA 1.75mm
print = 0.15mm 100mms Linear Advance
printer = Original Prusa i3 MK2
[recent]
config_directory = C:\Users\Jindřich Beneš\Desktop
skein_directory = C:\Users\Jindřich Beneš\Desktop

0
Slic3r settings 175/filament/ColorFabb Brass Bronze 1.75mm.ini → old/Slic3r settings 175/filament/ColorFabb Brass Bronze 1.75mm.ini
View File

0
Slic3r settings 175/filament/ColorFabb Wood Bamboo 1.75mm.ini → old/Slic3r settings 175/filament/ColorFabb Wood Bamboo 1.75mm.ini
View File

0
Slic3r settings 175/filament/ColorFabb XT 1.75mm.ini → old/Slic3r settings 175/filament/ColorFabb XT 1.75mm.ini
View File

0
Slic3r settings 175/filament/ColorFabb XT-CF20 1.75mm.ini → old/Slic3r settings 175/filament/ColorFabb XT-CF20 1.75mm.ini
View File

0
Slic3r settings 175/filament/Fillamentum ABS 1.75mm.ini → old/Slic3r settings 175/filament/Fillamentum ABS 1.75mm.ini
View File

0
Slic3r settings 175/filament/Prusa ABS 1.75mm.ini → old/Slic3r settings 175/filament/Prusa ABS 1.75mm.ini
View File

0
Slic3r settings 175/filament/Prusa FLEX 1.75mm.ini → old/Slic3r settings 175/filament/Prusa FLEX 1.75mm.ini
View File

0
Slic3r settings 175/filament/Prusa HIPS 1.75mm.ini → old/Slic3r settings 175/filament/Prusa HIPS 1.75mm.ini
View File

0
Slic3r settings 175/filament/Prusa PET 1.75mm.ini → old/Slic3r settings 175/filament/Prusa PET 1.75mm.ini
View File

0
Slic3r settings 175/filament/Prusa PLA 1.75mm.ini → old/Slic3r settings 175/filament/Prusa PLA 1.75mm.ini
View File

0
Slic3r settings 175/filament/Taulman Bridge 1.75mm.ini → old/Slic3r settings 175/filament/Taulman Bridge 1.75mm.ini
View File

0
Slic3r settings 175/filament/Taulman T-Glase 1.75mm.ini → old/Slic3r settings 175/filament/Taulman T-Glase 1.75mm.ini
View File

0
Slic3r settings 175/print/0.05mm PLA ULTRADETAIL.ini → old/Slic3r settings 175/print/0.05mm PLA ULTRADETAIL.ini
View File

0
Slic3r settings 175/print/0.10mm DETAIL.ini → old/Slic3r settings 175/print/0.10mm DETAIL.ini
View File

Some files were not shown because too many files have changed in this diff Show More