Add files via upload

Slic3r settings MK2MM/printer/Original Prusa i3 MK2 MultiMaterial 0.6 nozzle.ini

@@ -0,0 +1,38 @@
+# generated by Slic3r 1.37.0.7-prusa3d-win64 on Mon Aug 14 13:22:12 2017
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\n\n
+deretract_speed = 0,0,0,0
+end_gcode = M107 ; fan off\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors\n\n
+extruder_colour = #FFAA55;#5182DB;#4ECDD3;#FB7259
+extruder_offset = 0x0,0x0,0x0,0x0
+gcode_flavor = reprap
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.25,0.25,0.25,0.25
+min_layer_height = 0.07,0.07,0.07,0.07
+nozzle_diameter = 0.6,0.6,0.6,0.6
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 3,3,3,3
+retract_before_wipe = 0%,0%,0%,0%
+retract_layer_change = 0,0,0,0
+retract_length = 4,4,4,4
+retract_length_toolchange = 4,4,4,4
+retract_lift = 0.5,0.5,0.5,0.5
+retract_lift_above = 0,0,0,0
+retract_lift_below = 199,199,199,199
+retract_restart_extra = 0,0,0,0
+retract_restart_extra_toolchange = 0,0,0,0
+retract_speed = 50,50,50,50
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 1
+start_gcode = M115 U3.0.12 ; tell printer latest fw version\n; Start G-Code sequence START\nT[initial_tool]\nM109 S[first_layer_temperature]\nG21 ; set units to millimeters\nG90 ; use absolute coordinates\nM83 ; use relative distances for extrusion\nG28 W\nG80\nG92 E0.0\nM203 E100\nM92 E140\nG1 Z0.250 F7200.000\nG1 X50.0 E80.0  F1000.0\nG1 X160.0 E20.0  F1000.0\nG1 Z0.200 F7200.000\nG1 X220.0 E13 F1000.0\nG1 X240.0 E0 F1000.0\nG1 E-4 F1000.0\nG92 E0.0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 0
+wipe = 1,1,1,1
+z_offset = 0