Merge remote-tracking branch 'origin-prusa/master' into trilab-1.0.0

live/BIBO/0.0.4.ini

@@ -0,0 +1,853 @@
+# Print profiles for the BIBO printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = BIBO
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 0.0.4
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIBO/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:BIBO2]
+name = BIBO2 Touch
+variants = 0.4
+technology = FFF
+family = BIBO2
+bed_model = BIBO2_bed.stl
+bed_texture = BIBO2.svg
+default_materials = Generic PLA @BIBO2; Generic PETG @BIBO2; Generic ABS @BIBO2; Prusament PLA @BIBO2; Prusament PETG @BIBO2
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+# Common print preset
+[print:*common*]
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.40
+external_perimeter_speed = 25
+extra_perimeters = 0
+extruder_clearance_height = 12
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 15
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+interface_shells = 0
+max_print_speed = 60
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{if num_extruders==1}{filament_type[0]}{else}E1{filament_type[0]}_E2{filament_type[1]}{endif}_{printer_model}_{print_time}.gcode
+perimeters = 2
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 0
+skirts = 3
+skirt_distance = 2
+skirt_height = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.40
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_infill_extrusion_width = 0.40
+top_solid_infill_speed = 20
+travel_speed = 130
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 50
+wipe_tower_y = 50
+xy_size_compensation = 0
+
+[print:*0.05mm*]
+inherits = *common*
+bottom_solid_layers = 10
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+default_acceleration = 500
+external_perimeter_speed = 20
+fill_density = 20%
+first_layer_acceleration = 250
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 30
+max_print_speed = 60
+small_perimeter_speed = 20
+solid_infill_speed = 30
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+layer_height = 0.05
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+support_material_speed = 30
+top_solid_infill_speed = 20
+top_solid_layers = 15
+
+[print:*0.07mm*]
+inherits = *common*
+bottom_solid_layers = 8
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+default_acceleration = 1000
+external_perimeter_speed = 20
+fill_density = 15%
+first_layer_acceleration = 500
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 40
+max_print_speed = 60
+small_perimeter_speed = 20
+solid_infill_speed = 40
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+layer_height = 0.07
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+support_material_speed = 40
+top_solid_infill_speed = 30
+top_solid_layers = 11
+
+[print:*0.10mm*]
+inherits = *common*
+bottom_solid_layers = 7
+bridge_flow_ratio = 0.7
+layer_height = 0.1
+perimeter_acceleration = 800
+top_solid_layers = 9
+
+[print:*0.12mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.12
+perimeters = 3
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 6
+top_solid_layers = 7
+
+[print:*0.15mm*]
+inherits = *common*
+external_perimeter_speed = 25
+infill_acceleration = 1100
+infill_speed = 50
+layer_height = 0.15
+perimeter_acceleration = 800
+perimeter_speed = 40
+solid_infill_speed = 40
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 5
+top_solid_layers = 7
+
+[print:*0.20mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.20
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 4
+top_solid_layers = 5
+
+[print:*0.24mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.24
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:*0.28mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.28
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:*0.30mm*]
+inherits = *common*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 25
+infill_acceleration = 1100
+infill_speed = 60
+layer_height = 0.3
+perimeter_acceleration = 800
+perimeter_speed = 50
+solid_infill_speed = 50
+top_infill_extrusion_width = 0.4
+top_solid_layers = 4
+
+[print:*soluble_support*]
+inherits = *common*
+overhangs = 1
+skirts = 0
+support_material = 1
+support_material_contact_distance = 0
+support_material_extruder = 2
+support_material_extrusion_width = 0.45
+support_material_interface_extruder = 2
+support_material_interface_layers = 3
+support_material_interface_spacing = 0.1
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 1
+wipe_tower_bridging = 6
+support_material_interface_speed = 80%
+perimeter_speed = 40
+solid_infill_speed = 40
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+
+[print:0.05mm ULTRADETAIL @BIBO2]
+inherits = *0.05mm*
+# alias = 0.05mm ULTRADETAIL
+infill_extrusion_width = 0.5
+
+[print:0.07mm SUPERDETAIL @BIBO2]
+inherits = *0.07mm*
+# alias = 0.07mm SUPERDETAIL
+infill_extrusion_width = 0.5
+
+[print:0.10mm HIGHDETAIL @BIBO2]
+inherits = *0.10mm*
+# alias = 0.10mm HIGHDETAIL
+infill_extrusion_width = 0.5
+
+[print:0.12mm DETAIL @BIBO2]
+inherits = *0.12mm*
+# alias = 0.12mm DETAIL
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+
+[print:0.15mm OPTIMAL @BIBO2]
+inherits = *0.15mm*
+# alias = 0.15mm OPTIMAL
+top_infill_extrusion_width = 0.45
+
+[print:0.20mm NORMAL @BIBO2]
+inherits = *0.20mm*
+# alias = 0.20mm NORMAL
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+
+[print:0.24mm DRAFT @BIBO2]
+inherits = *0.24mm*
+# alias = 0.24mm DRAFT
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+
+[print:0.28mm SUPERDRAFT @BIBO2]
+inherits = *0.28mm*
+# alias = 0.28mm SUPERDRAFT
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+
+[print:0.30mm ULTRADRAFT @BIBO2]
+inherits = *0.30mm*
+# alias = 0.30mm ULTRADRAFT
+bottom_solid_layers = 3
+bridge_speed = 30
+external_perimeter_speed = 30
+infill_acceleration = 1100
+infill_speed = 55
+max_print_speed = 60
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 50
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+
+# Soluble Supports Profiles for dual extrusion #
+[print:0.15mm OPTIMAL SOLUBLE FULL @BIBO2]
+inherits = 0.15mm OPTIMAL @BIBO2; *soluble_support*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+external_perimeter_speed = 25
+notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
+support_material_extruder = 2
+perimeter_speed = 40
+solid_infill_speed = 40
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+
+[print:0.15mm OPTIMAL SOLUBLE INTERFACE @BIBO2]
+inherits = 0.15mm OPTIMAL SOLUBLE FULL @BIBO2
+notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
+support_material_interface_layers = 3
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+
+[print:0.20mm NORMAL SOLUBLE FULL @BIBO2]
+inherits = 0.20mm NORMAL @BIBO2; *soluble_support*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+external_perimeter_speed = 30
+notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
+support_material_extruder = 2
+perimeter_speed = 40
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+
+[print:0.20mm NORMAL SOLUBLE INTERFACE @BIBO2]
+inherits = 0.20mm NORMAL SOLUBLE FULL @BIBO2
+notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
+support_material_interface_layers = 3
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+
+# Common filament preset
+[filament:*common*]
+cooling = 0
+compatible_printers = 
+extrusion_multiplier = 1
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_minimal_purge_on_wipe_tower = 15
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 20
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/
+
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 60
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_max_volumetric_speed = 15
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 20
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+fan_always_on = 1
+cooling = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+disable_fan_first_layers = 3
+temperature = 200
+
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_max_volumetric_speed = 8
+filament_type = PETG
+filament_density = 1.27
+filament_cost = 30
+first_layer_bed_temperature =70
+first_layer_temperature = 240
+fan_always_on = 1
+max_fan_speed = 50
+min_fan_speed = 20
+bridge_fan_speed = 100
+temperature = 240
+
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 100
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #FFF2EC
+filament_max_volumetric_speed = 11
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+filament_density = 1.04
+filament_cost = 20
+first_layer_bed_temperature = 100
+first_layer_temperature = 245
+fan_always_on = 0
+max_fan_speed = 0
+min_fan_speed = 0
+bridge_fan_speed = 25
+top_fan_speed = 0
+temperature = 245
+
+[filament:*FLEX*]
+inherits = *common*
+bed_temperature = 50
+bridge_fan_speed = 80
+# For now, all but selected filaments are disabled for the MMU 2.0
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1.2
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #008000
+filament_max_volumetric_speed = 1.5
+filament_type = FLEX
+first_layer_bed_temperature = 50
+first_layer_temperature = 240
+max_fan_speed = 90
+min_fan_speed = 70
+#start_filament_gcode = "M900 K0"; Filament gcode"
+temperature = 240
+filament_retract_length = 0.8
+filament_deretract_speed = 15
+filament_retract_lift = 0
+filament_wipe = 0
+
+[filament:Generic PLA @BIBO2]
+inherits = *PLA*
+filament_vendor = Generic
+filament_notes = "List of materials which typically use standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+
+[filament:Generic PETG @BIBO2]
+inherits = *PET*
+filament_vendor = Generic
+
+[filament:Generic ABS @BIBO2]
+inherits = *ABS*
+first_layer_bed_temperature = 90		
+bed_temperature = 90
+filament_vendor = Generic
+filament_cost = 27.82
+filament_density = 1.08
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 15
+max_fan_speed = 15
+slowdown_below_layer_time = 20
+disable_fan_first_layers = 4
+fan_below_layer_time = 20
+bridge_fan_speed = 25
+
+[filament:Esun ABS @BIBO2]
+inherits = Generic ABS @BIBO2
+filament_vendor = Esun
+filament_cost = 27.82
+filament_density = 1.08
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 15
+max_fan_speed = 15
+slowdown_below_layer_time = 20
+disable_fan_first_layers = 4
+fan_below_layer_time = 20
+bridge_fan_speed = 25
+
+[filament:Hatchbox ABS @BIBO2]
+inherits = Generic ABS @BIBO2
+filament_vendor = Hatchbox
+filament_cost = 27.82
+filament_density = 1.08
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 15
+max_fan_speed = 15
+slowdown_below_layer_time = 20
+disable_fan_first_layers = 4
+fan_below_layer_time = 20
+bridge_fan_speed = 25
+
+[filament:Generic HIPS @BIBO2]
+inherits = *ABS*
+filament_vendor = Generic
+filament_cost = 27.3
+filament_density = 1.04
+bridge_fan_speed = 50
+cooling = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 10
+filament_colour = #FFFFD7
+filament_soluble = 1
+filament_type = HIPS
+first_layer_temperature = 230
+max_fan_speed = 20
+min_fan_speed = 20
+temperature = 230
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+
+[filament:AMOLEN bronze PLA @BIBO2]
+inherits = *PLA*
+filament_vendor = AMOLEN
+temperature = 205
+bed_temperature = 65
+filament_colour = #808040
+first_layer_bed_temperature = 65
+first_layer_temperature = 215
+filament_cost = 25.99
+filament_density = 1.24
+
+[filament:Prusament PLA @BIBO2]
+inherits = *PLA*
+filament_vendor = Prusa Polymers
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 24.99
+filament_density = 1.24
+
+[filament:Prusament PETG @BIBO2]
+inherits = *PET*
+filament_vendor = Prusa Polymers
+temperature = 245
+bed_temperature = 70
+first_layer_temperature = 245
+first_layer_bed_temperature =70
+filament_cost = 24.99
+filament_density = 1.27
+
+[filament:PrimaSelect PVA+ @BIBO2]
+inherits = *PLA*
+filament_vendor = PrimaSelect
+filament_cost = 108
+filament_density = 1.23
+cooling = 0
+fan_always_on = 0
+filament_colour = #FFFFD7
+filament_max_volumetric_speed = 3.8
+filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_soluble = 1
+filament_type = PVA
+first_layer_temperature = 195
+temperature = 195
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+
+[filament:No Filament - standby only @BIBO2]
+first_layer_temperature = 170
+temperature = 170
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+
+[filament:Generic FLEX @BIBO2]
+inherits = *FLEX*
+filament_vendor = Generic
+filament_cost = 82
+filament_density = 1.22
+filament_max_volumetric_speed = 1.2
+filament_retract_length = 0
+filament_retract_speed = nil
+filament_retract_lift = nil
+
+[filament:Overture TPU @BIBO2]
+inherits = *FLEX*
+filament_vendor = Overture
+filament_max_volumetric_speed = 1.5
+first_layer_temperature = 235
+first_layer_bed_temperature = 50
+temperature = 235
+bed_temperature = 50
+bridge_fan_speed = 100
+max_fan_speed = 80
+min_fan_speed = 80
+filament_retract_before_travel = 3
+filament_cost = 23.99
+filament_density = 1.21
+
+[filament:SainSmart TPU @BIBO2]
+inherits = *FLEX*
+filament_vendor = SainSmart
+fan_always_on = 1
+filament_max_volumetric_speed = 2.5
+extrusion_multiplier = 1.15
+first_layer_temperature = 230
+first_layer_bed_temperature = 50
+temperature = 230
+bed_temperature = 50
+bridge_fan_speed = 100
+max_fan_speed = 80
+min_fan_speed = 80
+filament_retract_before_travel = 3
+filament_cost = 32.99
+filament_density = 1.21
+filament_retract_length = 0.5
+filament_retract_speed = nil
+filament_deretract_speed = 15
+filament_retract_lift = 0
+filament_wipe = 0
+disable_fan_first_layers = 3
+min_print_speed = 15
+slowdown_below_layer_time = 10
+cooling = 1
+
+[filament:Filatech FilaFlex40 @BIBO2]
+inherits = *FLEX*
+filament_vendor = Filatech
+fan_always_on = 1
+filament_max_volumetric_speed = 2.5
+extrusion_multiplier = 1.15
+first_layer_temperature = 230
+first_layer_bed_temperature = 50
+temperature = 230
+bed_temperature = 50
+bridge_fan_speed = 100
+max_fan_speed = 50
+min_fan_speed = 50
+filament_retract_before_travel = 3
+filament_cost = 51.45
+filament_density = 1.22
+filament_retract_length = 0.5
+filament_retract_speed = 20
+filament_deretract_speed = 15
+filament_retract_lift = 0
+filament_wipe = 0
+disable_fan_first_layers = 3
+min_print_speed = 15
+slowdown_below_layer_time = 10
+cooling = 1
+
+# Common printer preset
+[printer:*common*]
+printer_technology = FFF
+bed_shape = -107x-93,107x-93,107x93,-107x93
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
+between_objects_gcode = 
+deretract_speed = 0 # By setting this value to 0 deretract used the retract_speed
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+silent_mode = 0
+remaining_times = 0
+machine_max_acceleration_e = 1100
+machine_max_acceleration_extruding = 5000
+machine_max_acceleration_retracting = 1100
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 20
+machine_max_feedrate_x = 350
+machine_max_feedrate_y = 350
+machine_max_feedrate_z = 2
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.3
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.30
+min_layer_height = 0.05
+max_print_height = 160
+printer_notes = 
+printer_settings_id = 
+printer_vendor = BIBO
+retract_before_travel = 1
+retract_before_wipe = 100%
+retract_layer_change = 1
+retract_length = 1.5
+retract_length_toolchange = 1.5
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 20
+single_extruder_multi_material = 0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+printer_model = 
+default_print_profile = 
+default_filament_profile = 
+
+[printer:BIBO2 Touch Dual extrusion]
+inherits = *common*
+printer_model = BIBO2
+between_objects_gcode = 
+default_filament_profile = Generic PLA @BIBO2
+default_print_profile = 0.20mm NORMAL @BIBO2
+deretract_speed = 0,0 # Setting this value to 0 uses the retract speed
+extruder_colour = #FFFF00;#229403
+extruder_offset = 0x0,0x0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.3,0.3
+min_layer_height = 0.05,0.05
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+printer_settings_id = 
+printer_variant = 0.4
+nozzle_diameter = 0.4,0.4
+remaining_times = 0
+retract_before_travel = 1,1
+retract_before_wipe = 100%,100%
+retract_layer_change = 1,1
+retract_length = 1.5,1.5
+retract_length_toolchange = 1.5,1.5
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 20,20
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers\nG21  ; set units to metric\nG90  ; absolute positioning\nM107 ; start with the fan off\nM190 S{max(first_layer_bed_temperature[0] - 5, first_layer_bed_temperature[1] - 5)} ; wait for bed temp\nM140 S{max(first_layer_bed_temperature[0], first_layer_bed_temperature[1])}  ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[1]} T1; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[1]} T1; wait for 2nd nozzle heat to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0      ; move X/Y to min endstops\nG28 Z0         ; move Z to min endstops\nG1 Z2.0 F400   ; move the platform down 2mm\nT[initial_tool]; switch to initial tool position\nG92 E0.0       ; reset extruder\nG28            ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nG92 E0.0       ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO now Printing... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
+thumbnails = 
+toolchange_gcode = 
+use_relative_e_distances = 1
+wipe = 1,1
+z_offset = 0
+
+[printer:BIBO2 Touch E1 right only extrusion]
+inherits = *common*
+printer_model = BIBO2
+printer_variant = 0.4
+extruder_colour = #FFFF00
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+nozzle_diameter = 0.4
+retract_before_travel = 1
+retract_length = 1.5
+retract_speed = 20
+deretract_speed = 0 # Setting this value to 0 uses the retract speed
+retract_before_wipe = 100%
+default_print_profile = 0.20mm NORMAL @BIBO2
+default_filament_profile = Generic PLA @BIBO2
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nG21            ; set units to metric\nG90            ; absolute positioning\nM107           ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]}  ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0] * 0.791} T1 ; set 2nd nozzle heater to 79.1 percent standby temp\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0] * 0.791} T1 ; wait for 2nd nozzle heat to 79.1 percent standby temp\nM105 ; Report Temperatures\nG28 X0 Y0        ; move X/Y to min endstops\nG28 Z0           ; move Z to min endstops\nG1 Y0 F1200 E0   ; move Y to min endstop and extrude 0 filament\nT[initial_tool]  ; switch to initial tool position\nG92 E0.0         ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0     ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2   ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0      ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4  ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0     ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6   ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0        ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8    ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
+thumbnails = 
+toolchange_gcode = 
+use_relative_e_distances = 1
+wipe = 1
+z_offset = 0
+
+
+[printer:BIBO2 Touch E2 left only extrusion]
+inherits = *common*
+printer_model = BIBO2
+printer_variant = 0.4
+extruder_colour = #229403
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+nozzle_diameter = 0.4
+retract_before_travel = 1
+retract_length = 1.5
+retract_speed = 20
+deretract_speed = 0 # Setting this value to 0 uses the retract speed
+retract_before_wipe = 100%
+default_print_profile = 0.20mm NORMAL @BIBO2
+default_filament_profile = Generic PLA @BIBO2
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nG21  ; set units to metric\nG90  ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0  ; move X/Y to min endstops\nG28 Z0     ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nT0 ; switch to tool position T0\nG90 ; absolute positioning\nG92 E0.0 ; zero the current extruder coordinate\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0       ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2     ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0        ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4    ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0       ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6     ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0          ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8      ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
+thumbnails = 
+toolchange_gcode = 
+use_relative_e_distances = 1
+wipe = 1
+z_offset = 0
+
+# Ditto Printing options with custom beds and special start end gcode for print duplication from one nozzle to the other
+[printer:BIBO2 E1 right E2 Ditto]
+inherits = BIBO2 Touch E1 right only extrusion
+printer_model = BIBO2
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+bed_shape = 0x-93,33x-93,33x93,0x93
+#bed_model = BIBO2_bed.stl
+#bed_texture = BIBO2.svg
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T1 ; set 2nd nozzle heater to print temperature\n
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nM420 S1 ; Turn on Ditto Printing\nG21            ; set units to metric\nG90            ; absolute positioning\nM107           ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]}  ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to same first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0]} T1 ; wait for 2nd nozzle heat to same first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0        ; move X/Y to min endstops\nG28 Z0           ; move Z to min endstops\nG1 Y0 F1200 E0   ; move Y to min endstop and extrude 0 filament\nT[initial_tool]  ; switch to initial tool position\nG92 E0.0         ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0     ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2   ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0      ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4  ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0     ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6   ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0        ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8    ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
+
+[printer:BIBO2 E2 left E1 Ditto]
+inherits = BIBO2 Touch E2 left only extrusion
+printer_model = BIBO2
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+bed_shape = -33x-93,0x-93,0x93,-33x93
+#bed_model = BIBO2_bed.stl
+#bed_texture = BIBO2.svg
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T0 ; set 1st nozzle heater to print temperature\n
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nM420 S1 ; Turn on Ditto Printing\nG21  ; set units to metric\nG90  ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto print temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto printing temperature\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0  ; move X/Y to min endstops\nG28 Z0     ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nT0 ; switch to tool position T0\nG90 ; absolute positioning\nG92 E0.0 ; zero the current extruder coordinate\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0       ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2     ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0        ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4    ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0       ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6     ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0          ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8      ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen

live/BIBO/0.0.5.ini

@@ -0,0 +1,853 @@
+# Print profiles for the BIBO printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = BIBO
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 0.0.5
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/BIBO/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:BIBO2]
+name = BIBO2 Touch
+variants = 0.4
+technology = FFF
+family = BIBO2
+bed_model = BIBO2_bed.stl
+bed_texture = BIBO2.svg
+default_materials = Generic PLA @BIBO2; Generic PETG @BIBO2; Generic ABS @BIBO2; Prusament PLA @BIBO2; Prusament PETG @BIBO2
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+# Common print preset
+[print:*common*]
+avoid_crossing_perimeters = 0
+bottom_fill_pattern = rectilinear
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 20
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.40
+external_perimeter_speed = 25
+extra_perimeters = 0
+extruder_clearance_height = 12
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 15
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 20%
+interface_shells = 0
+max_print_speed = 60
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{if num_extruders==1}{filament_type[0]}{else}E1{filament_type[0]}_E2{filament_type[1]}{endif}_{printer_model}_{print_time}.gcode
+perimeters = 2
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 0
+skirts = 3
+skirt_distance = 2
+skirt_height = 1
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.40
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_infill_extrusion_width = 0.40
+top_solid_infill_speed = 20
+travel_speed = 130
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 50
+wipe_tower_y = 50
+xy_size_compensation = 0
+
+[print:*0.05mm*]
+inherits = *common*
+bottom_solid_layers = 10
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+default_acceleration = 500
+external_perimeter_speed = 20
+fill_density = 20%
+first_layer_acceleration = 250
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 30
+max_print_speed = 60
+small_perimeter_speed = 20
+solid_infill_speed = 30
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+layer_height = 0.05
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+support_material_speed = 30
+top_solid_infill_speed = 20
+top_solid_layers = 15
+
+[print:*0.07mm*]
+inherits = *common*
+bottom_solid_layers = 8
+bridge_acceleration = 300
+bridge_flow_ratio = 0.7
+bridge_speed = 20
+default_acceleration = 1000
+external_perimeter_speed = 20
+fill_density = 15%
+first_layer_acceleration = 500
+gap_fill_speed = 20
+infill_acceleration = 800
+infill_speed = 40
+max_print_speed = 60
+small_perimeter_speed = 20
+solid_infill_speed = 40
+support_material_extrusion_width = 0.3
+support_material_spacing = 1.5
+layer_height = 0.07
+perimeter_acceleration = 300
+perimeter_speed = 30
+perimeters = 3
+support_material_speed = 40
+top_solid_infill_speed = 30
+top_solid_layers = 11
+
+[print:*0.10mm*]
+inherits = *common*
+bottom_solid_layers = 7
+bridge_flow_ratio = 0.7
+layer_height = 0.1
+perimeter_acceleration = 800
+top_solid_layers = 9
+
+[print:*0.12mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.12
+perimeters = 3
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 6
+top_solid_layers = 7
+
+[print:*0.15mm*]
+inherits = *common*
+external_perimeter_speed = 25
+infill_acceleration = 1100
+infill_speed = 50
+layer_height = 0.15
+perimeter_acceleration = 800
+perimeter_speed = 40
+solid_infill_speed = 40
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 5
+top_solid_layers = 7
+
+[print:*0.20mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.20
+top_infill_extrusion_width = 0.4
+bottom_solid_layers = 4
+top_solid_layers = 5
+
+[print:*0.24mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.24
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:*0.28mm*]
+inherits = *common*
+perimeter_speed = 40
+external_perimeter_speed = 25
+infill_speed = 50
+solid_infill_speed = 40
+layer_height = 0.28
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:*0.30mm*]
+inherits = *common*
+bottom_solid_layers = 4
+bridge_flow_ratio = 0.95
+external_perimeter_speed = 25
+infill_acceleration = 1100
+infill_speed = 60
+layer_height = 0.3
+perimeter_acceleration = 800
+perimeter_speed = 50
+solid_infill_speed = 50
+top_infill_extrusion_width = 0.4
+top_solid_layers = 4
+
+[print:*soluble_support*]
+inherits = *common*
+overhangs = 1
+skirts = 0
+support_material = 1
+support_material_contact_distance = 0
+support_material_extruder = 2
+support_material_extrusion_width = 0.45
+support_material_interface_extruder = 2
+support_material_interface_layers = 3
+support_material_interface_spacing = 0.1
+support_material_synchronize_layers = 1
+support_material_threshold = 80
+support_material_with_sheath = 1
+wipe_tower_bridging = 6
+support_material_interface_speed = 80%
+perimeter_speed = 40
+solid_infill_speed = 40
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+
+[print:0.05mm ULTRADETAIL @BIBO2]
+inherits = *0.05mm*
+# alias = 0.05mm ULTRADETAIL
+infill_extrusion_width = 0.5
+
+[print:0.07mm SUPERDETAIL @BIBO2]
+inherits = *0.07mm*
+# alias = 0.07mm SUPERDETAIL
+infill_extrusion_width = 0.5
+
+[print:0.10mm HIGHDETAIL @BIBO2]
+inherits = *0.10mm*
+# alias = 0.10mm HIGHDETAIL
+infill_extrusion_width = 0.5
+
+[print:0.12mm DETAIL @BIBO2]
+inherits = *0.12mm*
+# alias = 0.12mm DETAIL
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+
+[print:0.15mm OPTIMAL @BIBO2]
+inherits = *0.15mm*
+# alias = 0.15mm OPTIMAL
+top_infill_extrusion_width = 0.45
+
+[print:0.20mm NORMAL @BIBO2]
+inherits = *0.20mm*
+# alias = 0.20mm NORMAL
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+
+[print:0.24mm DRAFT @BIBO2]
+inherits = *0.24mm*
+# alias = 0.24mm DRAFT
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+
+[print:0.28mm SUPERDRAFT @BIBO2]
+inherits = *0.28mm*
+# alias = 0.28mm SUPERDRAFT
+travel_speed = 130
+infill_speed = 50
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+support_material_extrusion_width = 0.38
+
+[print:0.30mm ULTRADRAFT @BIBO2]
+inherits = *0.30mm*
+# alias = 0.30mm ULTRADRAFT
+bottom_solid_layers = 3
+bridge_speed = 30
+external_perimeter_speed = 30
+infill_acceleration = 1100
+infill_speed = 55
+max_print_speed = 60
+perimeter_speed = 50
+small_perimeter_speed = 30
+solid_infill_speed = 50
+top_solid_infill_speed = 40
+support_material_speed = 45
+external_perimeter_extrusion_width = 0.6
+extrusion_width = 0.5
+first_layer_extrusion_width = 0.42
+infill_extrusion_width = 0.5
+perimeter_extrusion_width = 0.5
+solid_infill_extrusion_width = 0.5
+top_infill_extrusion_width = 0.45
+support_material_extrusion_width = 0.38
+
+# Soluble Supports Profiles for dual extrusion #
+[print:0.15mm OPTIMAL SOLUBLE FULL @BIBO2]
+inherits = 0.15mm OPTIMAL @BIBO2; *soluble_support*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+external_perimeter_speed = 25
+notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
+support_material_extruder = 2
+perimeter_speed = 40
+solid_infill_speed = 40
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+
+[print:0.15mm OPTIMAL SOLUBLE INTERFACE @BIBO2]
+inherits = 0.15mm OPTIMAL SOLUBLE FULL @BIBO2
+notes = Set your soluble extruder in Multiple Extruders >  Support material/raft interface extruder
+support_material_interface_layers = 3
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+
+[print:0.20mm NORMAL SOLUBLE FULL @BIBO2]
+inherits = 0.20mm NORMAL @BIBO2; *soluble_support*
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+external_perimeter_speed = 30
+notes = Set your soluble extruder in Multiple Extruders > Support material/raft/skirt extruder & Support material/raft interface extruder
+support_material_extruder = 2
+perimeter_speed = 40
+solid_infill_speed = 40
+top_solid_infill_speed = 30
+
+[print:0.20mm NORMAL SOLUBLE INTERFACE @BIBO2]
+inherits = 0.20mm NORMAL SOLUBLE FULL @BIBO2
+notes = Set your soluble extruder in Multiple Extruders > Support material/raft interface extruder
+support_material_interface_layers = 3
+support_material_with_sheath = 0
+support_material_xy_spacing = 80%
+
+# Common filament preset
+[filament:*common*]
+cooling = 0
+compatible_printers = 
+extrusion_multiplier = 1
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_minimal_purge_on_wipe_tower = 15
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 20
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/
+
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 60
+fan_below_layer_time = 100
+filament_colour = #FF3232
+filament_max_volumetric_speed = 15
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 20
+first_layer_bed_temperature = 60
+first_layer_temperature = 215
+fan_always_on = 1
+cooling = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+disable_fan_first_layers = 3
+temperature = 200
+
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #FF8000
+filament_max_volumetric_speed = 8
+filament_type = PETG
+filament_density = 1.27
+filament_cost = 30
+first_layer_bed_temperature =70
+first_layer_temperature = 240
+fan_always_on = 1
+max_fan_speed = 50
+min_fan_speed = 20
+bridge_fan_speed = 100
+temperature = 240
+
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 100
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #FFF2EC
+filament_max_volumetric_speed = 11
+filament_ramming_parameters = "120 100 5.70968 6.03226 7 8.25806 9 9.19355 9.3871 9.77419 10.129 10.3226 10.4516 10.5161| 0.05 5.69677 0.45 6.15484 0.95 8.76774 1.45 9.20323 1.95 9.95806 2.45 10.3871 2.95 10.5677 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+filament_density = 1.04
+filament_cost = 20
+first_layer_bed_temperature = 100
+first_layer_temperature = 245
+fan_always_on = 0
+max_fan_speed = 0
+min_fan_speed = 0
+bridge_fan_speed = 25
+top_fan_speed = 0
+temperature = 245
+
+[filament:*FLEX*]
+inherits = *common*
+bed_temperature = 50
+bridge_fan_speed = 80
+# For now, all but selected filaments are disabled for the MMU 2.0
+cooling = 0
+disable_fan_first_layers = 3
+extrusion_multiplier = 1.2
+fan_always_on = 0
+fan_below_layer_time = 100
+filament_colour = #008000
+filament_max_volumetric_speed = 1.5
+filament_type = FLEX
+first_layer_bed_temperature = 50
+first_layer_temperature = 240
+max_fan_speed = 90
+min_fan_speed = 70
+#start_filament_gcode = "M900 K0"; Filament gcode"
+temperature = 240
+filament_retract_length = 0.8
+filament_deretract_speed = 15
+filament_retract_lift = 0
+filament_wipe = 0
+
+[filament:Generic PLA @BIBO2]
+inherits = *PLA*
+filament_vendor = Generic
+filament_notes = "List of materials which typically use standard PLA print settings:\n\nDas Filament\nEsun PLA\nEUMAKERS PLA\nFiberlogy HD-PLA\nFillamentum PLA\nFloreon3D\nHatchbox PLA\nPlasty Mladec PLA\nPrimavalue PLA\nProto pasta Matte Fiber\nVerbatim PLA\nVerbatim BVOH"
+
+[filament:Generic PETG @BIBO2]
+inherits = *PET*
+filament_vendor = Generic
+
+[filament:Generic ABS @BIBO2]
+inherits = *ABS*
+first_layer_bed_temperature = 90		
+bed_temperature = 90
+filament_vendor = Generic
+filament_cost = 27.82
+filament_density = 1.08
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 15
+max_fan_speed = 15
+slowdown_below_layer_time = 20
+disable_fan_first_layers = 4
+fan_below_layer_time = 20
+bridge_fan_speed = 25
+
+[filament:Esun ABS @BIBO2]
+inherits = Generic ABS @BIBO2
+filament_vendor = Esun
+filament_cost = 27.82
+filament_density = 1.08
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 15
+max_fan_speed = 15
+slowdown_below_layer_time = 20
+disable_fan_first_layers = 4
+fan_below_layer_time = 20
+bridge_fan_speed = 25
+
+[filament:Hatchbox ABS @BIBO2]
+inherits = Generic ABS @BIBO2
+filament_vendor = Hatchbox
+filament_cost = 27.82
+filament_density = 1.08
+fan_always_on = 0
+cooling = 0
+min_fan_speed = 15
+max_fan_speed = 15
+slowdown_below_layer_time = 20
+disable_fan_first_layers = 4
+fan_below_layer_time = 20
+bridge_fan_speed = 25
+
+[filament:Generic HIPS @BIBO2]
+inherits = *ABS*
+filament_vendor = Generic
+filament_cost = 27.3
+filament_density = 1.04
+bridge_fan_speed = 50
+cooling = 1
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 10
+filament_colour = #FFFFD7
+filament_soluble = 1
+filament_type = HIPS
+first_layer_temperature = 230
+max_fan_speed = 20
+min_fan_speed = 20
+temperature = 230
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+
+[filament:AMOLEN bronze PLA @BIBO2]
+inherits = *PLA*
+filament_vendor = AMOLEN
+temperature = 205
+bed_temperature = 65
+filament_colour = #808040
+first_layer_bed_temperature = 65
+first_layer_temperature = 215
+filament_cost = 25.99
+filament_density = 1.24
+
+[filament:Prusament PLA @BIBO2]
+inherits = *PLA*
+filament_vendor = Prusa Polymers
+temperature = 215
+bed_temperature = 60
+first_layer_temperature = 215
+first_layer_bed_temperature = 60
+filament_cost = 24.99
+filament_density = 1.24
+
+[filament:Prusament PETG @BIBO2]
+inherits = *PET*
+filament_vendor = Prusa Polymers
+temperature = 245
+bed_temperature = 70
+first_layer_temperature = 245
+first_layer_bed_temperature =70
+filament_cost = 24.99
+filament_density = 1.27
+
+[filament:PrimaSelect PVA+ @BIBO2]
+inherits = *PLA*
+filament_vendor = PrimaSelect
+filament_cost = 108
+filament_density = 1.23
+cooling = 0
+fan_always_on = 0
+filament_colour = #FFFFD7
+filament_max_volumetric_speed = 3.8
+filament_ramming_parameters = "120 100 8.3871 8.6129 8.93548 9.22581 9.48387 9.70968 9.87097 10.0323 10.2258 10.4194 10.6452 10.8065| 0.05 8.34193 0.45 8.73548 0.95 9.34836 1.45 9.78385 1.95 10.0871 2.45 10.5161 2.95 10.8903 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_soluble = 1
+filament_type = PVA
+first_layer_temperature = 195
+temperature = 195
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+
+[filament:No Filament - standby only @BIBO2]
+first_layer_temperature = 170
+temperature = 170
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_BIBO.*/ and num_extruders==2
+
+[filament:Generic FLEX @BIBO2]
+inherits = *FLEX*
+filament_vendor = Generic
+filament_cost = 82
+filament_density = 1.22
+filament_max_volumetric_speed = 1.2
+filament_retract_length = 0
+filament_retract_speed = nil
+filament_retract_lift = nil
+
+[filament:Overture TPU @BIBO2]
+inherits = *FLEX*
+filament_vendor = Overture
+filament_max_volumetric_speed = 1.5
+first_layer_temperature = 235
+first_layer_bed_temperature = 50
+temperature = 235
+bed_temperature = 50
+bridge_fan_speed = 100
+max_fan_speed = 80
+min_fan_speed = 80
+filament_retract_before_travel = 3
+filament_cost = 23.99
+filament_density = 1.21
+
+[filament:SainSmart TPU @BIBO2]
+inherits = *FLEX*
+filament_vendor = SainSmart
+fan_always_on = 1
+filament_max_volumetric_speed = 2.5
+extrusion_multiplier = 1.15
+first_layer_temperature = 230
+first_layer_bed_temperature = 50
+temperature = 230
+bed_temperature = 50
+bridge_fan_speed = 100
+max_fan_speed = 80
+min_fan_speed = 80
+filament_retract_before_travel = 3
+filament_cost = 32.99
+filament_density = 1.21
+filament_retract_length = 0.5
+filament_retract_speed = nil
+filament_deretract_speed = 15
+filament_retract_lift = 0
+filament_wipe = 0
+disable_fan_first_layers = 3
+min_print_speed = 15
+slowdown_below_layer_time = 10
+cooling = 1
+
+[filament:Filatech FilaFlex40 @BIBO2]
+inherits = *FLEX*
+filament_vendor = Filatech
+fan_always_on = 1
+filament_max_volumetric_speed = 2.5
+extrusion_multiplier = 1.15
+first_layer_temperature = 230
+first_layer_bed_temperature = 50
+temperature = 230
+bed_temperature = 50
+bridge_fan_speed = 100
+max_fan_speed = 50
+min_fan_speed = 50
+filament_retract_before_travel = 3
+filament_cost = 51.45
+filament_density = 1.22
+filament_retract_length = 0.5
+filament_retract_speed = 20
+filament_deretract_speed = 15
+filament_retract_lift = 0
+filament_wipe = 0
+disable_fan_first_layers = 3
+min_print_speed = 15
+slowdown_below_layer_time = 10
+cooling = 1
+
+# Common printer preset
+[printer:*common*]
+printer_technology = FFF
+bed_shape = -107x-93,107x-93,107x93,-107x93
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
+between_objects_gcode = 
+deretract_speed = 0 # By setting this value to 0 deretract used the retract_speed
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+silent_mode = 0
+remaining_times = 0
+machine_max_acceleration_e = 1100
+machine_max_acceleration_extruding = 5000
+machine_max_acceleration_retracting = 1100
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 20
+machine_max_feedrate_x = 350
+machine_max_feedrate_y = 350
+machine_max_feedrate_z = 2
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.3
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.30
+min_layer_height = 0.05
+max_print_height = 160
+printer_notes = 
+printer_settings_id = 
+printer_vendor = BIBO
+retract_before_travel = 1
+retract_before_wipe = 100%
+retract_layer_change = 1
+retract_length = 1.5
+retract_length_toolchange = 1.5
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 20
+single_extruder_multi_material = 0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+printer_model = 
+default_print_profile = 
+default_filament_profile = 
+
+[printer:BIBO2 Touch Dual extrusion]
+inherits = *common*
+printer_model = BIBO2
+between_objects_gcode = 
+default_filament_profile = Generic PLA @BIBO2
+default_print_profile = 0.20mm NORMAL @BIBO2
+deretract_speed = 0,0 # Setting this value to 0 uses the retract speed
+extruder_colour = #FFFF00;#229403
+extruder_offset = 0x0,0x0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.3,0.3
+min_layer_height = 0.05,0.05
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+printer_settings_id = 
+printer_variant = 0.4
+nozzle_diameter = 0.4,0.4
+remaining_times = 0
+retract_before_travel = 1,1
+retract_before_wipe = 100%,100%
+retract_layer_change = 1,1
+retract_length = 1.5,1.5
+retract_length_toolchange = 1.5,1.5
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 20,20
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers\nG21  ; set units to metric\nG90  ; absolute positioning\nM107 ; start with the fan off\nM190 S{max(first_layer_bed_temperature[0] - 5, first_layer_bed_temperature[1] - 5)} ; wait for bed temp\nM140 S{max(first_layer_bed_temperature[0], first_layer_bed_temperature[1])}  ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[1]} T1; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[1]} T1; wait for 2nd nozzle heat to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0      ; move X/Y to min endstops\nG28 Z0         ; move Z to min endstops\nG1 Z2.0 F400   ; move the platform down 2mm\nT[initial_tool]; switch to initial tool position\nG92 E0.0       ; reset extruder\nG28            ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and extrude 0 filament\nG92 E0.0       ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO now Printing... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
+thumbnails = 
+toolchange_gcode = 
+use_relative_e_distances = 1
+wipe = 1,1
+z_offset = 0
+
+[printer:BIBO2 Touch E1 right only extrusion]
+inherits = *common*
+printer_model = BIBO2
+printer_variant = 0.4
+extruder_colour = #FFFF00
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+nozzle_diameter = 0.4
+retract_before_travel = 1
+retract_length = 1.5
+retract_speed = 20
+deretract_speed = 0 # Setting this value to 0 uses the retract speed
+retract_before_wipe = 100%
+default_print_profile = 0.20mm NORMAL @BIBO2
+default_filament_profile = Generic PLA @BIBO2
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nG21            ; set units to metric\nG90            ; absolute positioning\nM107           ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]}  ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0] * 0.791} T1 ; set 2nd nozzle heater to 79.1 percent standby temp\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0] * 0.791} T1 ; wait for 2nd nozzle heat to 79.1 percent standby temp\nM105 ; Report Temperatures\nG28 X0 Y0        ; move X/Y to min endstops\nG28 Z0           ; move Z to min endstops\nG1 Y0 F1200 E0   ; move Y to min endstop and extrude 0 filament\nT[initial_tool]  ; switch to initial tool position\nG92 E0.0         ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0     ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2   ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0      ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4  ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0     ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6   ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0        ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8    ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
+thumbnails = 
+toolchange_gcode = 
+use_relative_e_distances = 1
+wipe = 1
+z_offset = 0
+
+
+[printer:BIBO2 Touch E2 left only extrusion]
+inherits = *common*
+printer_model = BIBO2
+printer_variant = 0.4
+extruder_colour = #229403
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+nozzle_diameter = 0.4
+retract_before_travel = 1
+retract_length = 1.5
+retract_speed = 20
+deretract_speed = 0 # Setting this value to 0 uses the retract speed
+retract_before_wipe = 100%
+default_print_profile = 0.20mm NORMAL @BIBO2
+default_filament_profile = Generic PLA @BIBO2
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nG21  ; set units to metric\nG90  ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0] * 0.791} T0 ; set 1st nozzle heater to 79.1 percent standby temp\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0  ; move X/Y to min endstops\nG28 Z0     ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nT0 ; switch to tool position T0\nG90 ; absolute positioning\nG92 E0.0 ; zero the current extruder coordinate\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0       ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2     ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0        ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4    ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0       ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6     ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0          ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8      ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM117 BIBO Print complete ; Put print complete message on screen
+thumbnails = 
+toolchange_gcode = 
+use_relative_e_distances = 1
+wipe = 1
+z_offset = 0
+
+# Ditto Printing options with custom beds and special start end gcode for print duplication from one nozzle to the other
+[printer:BIBO2 E1 right E2 Ditto]
+inherits = BIBO2 Touch E1 right only extrusion
+printer_model = BIBO2
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+bed_shape = 0x-93,33x-93,33x93,0x93
+#bed_model = BIBO2_bed.stl
+#bed_texture = BIBO2.svg
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T1 ; set 2nd nozzle heater to print temperature\nG92 E0\n
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers E1 only (i.e. T0)\nM420 S1 ; Turn on Ditto Printing\nG21            ; set units to metric\nG90            ; absolute positioning\nM107           ; start with the fan off\nM190 S{first_layer_bed_temperature[0] - 5} ; wait for bed temp\nM140 S{first_layer_bed_temperature[0]}  ; continue bed heating to full temp while other things are happening\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to first layer temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to same first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; wait for 1st nozzle heat to first layer temperature\nM109 S{first_layer_temperature[0]} T1 ; wait for 2nd nozzle heat to same first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0        ; move X/Y to min endstops\nG28 Z0           ; move Z to min endstops\nG1 Y0 F1200 E0   ; move Y to min endstop and extrude 0 filament\nT[initial_tool]  ; switch to initial tool position\nG92 E0.0         ; reset extruder\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nM117 Cleaning... ; Put Cleaning message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0     ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2   ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0      ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4  ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0     ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6   ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0        ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8    ; draw 4th line\nG92 E0.0 ; reset extruder and zero the current extruder coordinate before printing\nM117 BIBO E1 now Printing... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen
+
+[printer:BIBO2 E2 left E1 Ditto]
+inherits = BIBO2 Touch E2 left only extrusion
+printer_model = BIBO2
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_BIBO\nPRINTER_MODEL_BIBO2
+bed_shape = -33x-93,0x-93,0x93,-33x93
+#bed_model = BIBO2_bed.stl
+#bed_texture = BIBO2.svg
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nM104 S{temperature[0]} T0 ; set 1st nozzle heater to print temperature\nG92 E0\n
+start_gcode = ;Start code PrusaSlicer BIBO 2 printers E2 only (i.e. T1)\nM420 S1 ; Turn on Ditto Printing\nG21  ; set units to metric\nG90  ; absolute positioning\nM107 ; start with the fan off\nM140 S{first_layer_bed_temperature[0] - 5} ; set bed temp\nM105 ; Report Temperatures\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp\nM104 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto print temperature\nM104 S{first_layer_temperature[0]} T1 ; set 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nM109 S{first_layer_temperature[0]} T0 ; set 1st nozzle heater to ditto printing temperature\nM109 S{first_layer_temperature[0]} T1 ; Wait for 2nd nozzle heater to first layer temperature\nM105 ; Report Temperatures\nG28 X0 Y0  ; move X/Y to min endstops\nG28 Z0     ; move Z to min endstops\nG1 Z2 F400 ; move the print bed down 2mm\nT0 ; switch to tool position T0\nG90 ; absolute positioning\nG92 E0.0 ; zero the current extruder coordinate\nG28 ; Home all axis\nG1 Y0 F1200 E0 ; move Y to min endstop and reset extruder\nG92 E0.0 ; zero the current extruder coordinate\nT1 ; switch to tool position T1\nG92 E0.0 ; zero the current extruder coordinate\nM117 E2 nozzle wipe... ; Put Nozzle wipe message on screen, Attempt Nozzle Wipe (for ooze free startup)\nG1 X-15.0 Y-92.9 Z0.3 F2400.0       ; move to start-line position\nG1 X15.0 Y-92.9 Z0.3 F1000.0 E2     ; draw 1st line\nG1 X15.0 Y-92.6 Z0.3 F3000.0        ; move to side a little\nG1 X-15.0 Y-92.6 Z0.3 F1000.0 E4    ; draw 2nd line\nG1 X-15.0 Y-92.3 Z0.3 F3000.0       ; move to side a little\nG1 X15.0 Y-92.3 Z0.3 F1000.0 E6     ; draw 3rd line\nG1 X15.0 Y-92 Z0.3 F3000.0          ; move to side a little\nG1 X-15.0 Y-92 Z0.3 F1000.0 E8      ; draw 4th line\nG92 E0.0 ; reset extruder coordinate to zero before printing\nM117 BIBO Now Printing from E2... ; Put now printing message on screen
+end_gcode = ;BIBO End GCode\nM107 ; turn fans off\nG91 ; Relative positioning\nG1 Z1 F100\nM140 S0    ; Disable heated bed\nM104 T0 S0 ; extruder T0 heater off\nM104 T1 S0 ; extruder T1 heater off\nG1 Z+0.5 X-20 Y-20 F300 ; move Z down then move print head a bit out of the way\nG28 X0 Y0 ; move X/Y to min endstops, so the head is out of the way\nG90    ; Absolute positioning\nG92 E0.0 ; Reset extruder position\nM84    ; Turn steppers off\nM420 S0 ; Turn off Ditto Printing function\nM117 BIBO Print complete ; Put print complete message on screen

live/BIBO/index.idx

@@ -1,16 +1,19 @@
-min_slic3r_version = 2.3.0-beta2
-0.0.3 Removed obsolete host keys.
-min_slic3r_version = 2.2.0-alpha3
-0.0.2 General print quality improvements
-0.0.1 Multiple Print models were unified into a single one.
-0.0.1-beta2 Bed model and textures added. Materials all use the BOBO2 identifier. deretract speed set to 0 to use retract speed.
-0.0.1-beta1 Added new printer profiles for ditto printing. New retraction settings, new materials. Removed some settings which do not apply. More start gcode improvements.
-0.0.1-alpha13 Adjusted Jerk, Acceleration, and maximum feedrates to better match the stock firmware. For Dual extrusion, tool change retractions were increased.
-0.0.1-alpha12 github repo created for version history
-0.0.1-alpha11 Revised version available to community for testing. Removed PVA and HIPS disolvable support materials from single extruder versions. Improved single extruder second nozzle standby temperature
-0.0.1-alpha8 Available to community Early adopters for testing. Corrected filament settings to prevent duplicates, and reworked start and end gcode.
-# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 0.0.1-alpha12 and newer,
-# so they will see the print bed.
-max_slic3r_version = 2.2.0-alpha2
-min_slic3r_version = 2.2.0-alpha0
-0.0.1-alpha Initial version
+min_slic3r_version = 2.4.1-beta3
+0.0.5 Correct Marlin Error accumulation for Ditto printer profiles.
+0.0.4 Correct Marlin Error accumulation
+min_slic3r_version = 2.3.0-beta2
+0.0.3 Removed obsolete host keys.
+min_slic3r_version = 2.2.0-alpha3
+0.0.2 General print quality improvements
+0.0.1 Multiple Print models were unified into a single one.
+0.0.1-beta2 Bed model and textures added. Materials all use the BOBO2 identifier. deretract speed set to 0 to use retract speed.
+0.0.1-beta1 Added new printer profiles for ditto printing. New retraction settings, new materials. Removed some settings which do not apply. More start gcode improvements.
+0.0.1-alpha13 Adjusted Jerk, Acceleration, and maximum feedrates to better match the stock firmware. For Dual extrusion, tool change retractions were increased.
+0.0.1-alpha12 github repo created for version history
+0.0.1-alpha11 Revised version available to community for testing. Removed PVA and HIPS disolvable support materials from single extruder versions. Improved single extruder second nozzle standby temperature
+0.0.1-alpha8 Available to community Early adopters for testing. Corrected filament settings to prevent duplicates, and reworked start and end gcode.
+# The following line (max_slic3r_version) forces the users of PrusaSlicer 2.2.0-alpha3 and newer to update the profiles to 0.0.1-alpha12 and newer,
+# so they will see the print bed.
+max_slic3r_version = 2.2.0-alpha2
+min_slic3r_version = 2.2.0-alpha0
+0.0.1-alpha Initial version

live/PrusaResearch/index.idx

@@ -1,4 +1,6 @@
 min_slic3r_version = 2.4.0-rc
+1.4.5 Added MMU2/S profiles for 0.25mm nozzle. Updated FW version. Enabled g-code thumbnails for MK3 family printers. Updated end g-code.
+1.4.4 Added multiple Fiberlogy filament profiles. Updated Extrudr filament profiles.
 1.4.3 Added new filament profiles and SLA materials.
 1.4.2 Added SLA material profiles.
 1.4.1 Updated firmware version.
@@ -23,6 +25,7 @@ min_slic3r_version = 2.4.0-alpha0
 1.3.0-alpha1 Added Prusament PCCF. Increased travel acceleration for Prusa MINI. Updated start g-code for Prusa MINI. Added multiple add:north and Extrudr filament profiles. Updated Z travel speed values.
 1.3.0-alpha0 Disabled thick bridges, updated support settings.
 min_slic3r_version = 2.3.2-alpha0
+1.3.7 Updated firmware version.
 1.3.6 Updated firmware version.
 1.3.5 Added material profiles for Prusament Resins.
 1.3.4 Added material profiles for new Prusament Resins. Added profiles for multiple BASF filaments.
@@ -31,6 +34,7 @@ min_slic3r_version = 2.3.2-alpha0
 1.3.1 Added multiple add:north and Extrudr filament profiles. Updated support head settings (SL1S).
 1.3.0 Added SL1S SPEED profiles.
 min_slic3r_version = 2.3.0-rc1
+1.2.12 Updated firmware version.
 1.2.11 Updated firmware version.
 1.2.10 Added multiple profiles for Filatech filaments. Updated SLA print settings (pad wall slope angle).
 1.2.9 Added material profiles for Prusament Resin.
@@ -51,6 +55,7 @@ min_slic3r_version = 2.3.0-alpha4
 1.2.0-alpha1 Renamed MK3S and MINI printer profiles. Updated end g-code (MINI). Added new SLA materials and filament profiles.
 1.2.0-alpha0 Added filament spool weights
 min_slic3r_version = 2.2.0-alpha3
+1.1.16 Updated firmware version.
 1.1.15 Updated firmware version.
 1.1.14 Updated firmware version.
 1.1.13 Updated firmware version. Updated end g-code in MMU2 printer profiles.

live/PrusaSlicer.version2

@@ -1 +1 @@
-2.4.1
+2.4.2

live/Snapmaker/1.0.0.ini

@@ -0,0 +1,473 @@
+# Snapmaker profiles
+
+# Based on the profiles from: https://github.com/nivekmai/snapmaker-prusa by nivekmai, WilliamBosacker, mrworf
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Snapmaker
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the Slic3r configuration to be downgraded.
+config_version = 1.0.0
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Snapmaker/
+# The printer models will be shown by the Configuration Wizard in this order,
+
+[printer_model:A250]
+name = Snapmaker A250
+variants = 0.4
+technology = FFF
+bed_model = A250_bed.stl
+bed_texture = A250_texture.svg
+default_materials = Generic PLA @Snapmaker; Generic PETG @Snapmaker
+
+[printer_model:A350]
+name = Snapmaker A350
+variants = 0.4
+technology = FFF
+bed_model = A350_bed.stl
+bed_texture = A350_texture.svg
+default_materials = Generic PLA @Snapmaker; Generic PETG @Snapmaker
+
+[print:*common*]
+avoid_crossing_perimeters = 1
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_separation = 0
+brim_type = outer_only
+brim_width = 0
+clip_multipart_objects = 1
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 75
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = gyroid
+first_layer_acceleration = 0
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.2
+first_layer_speed = 15
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 100
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.25
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 100
+max_volumetric_speed = 0
+min_skirt_length = 4
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+overhangs = 0
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 60
+perimeters = 2
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 1
+skirt_distance = 5
+skirt_height = 1
+skirts = 3
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 25%
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 80%
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.15
+support_material_enforce_layers = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.38
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 0
+support_material_interface_layers = 2
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 60
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thick_bridges = 1
+thin_walls = 0
+threads = 8
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 60%
+top_solid_layers = 4
+top_solid_min_thickness = 0
+travel_speed = 150
+travel_speed_z = 0
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_brim_width = 2
+wipe_tower_no_sparse_layers = 0
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4
+
+[print:0.10mm HIGHDETAIL @SnapmakerA350]
+inherits = *common*
+layer_height = 0.1
+bottom_solid_layers = 7
+top_solid_layers = 8
+top_solid_min_thickness = 0.8
+bottom_solid_min_thickness = 0.8
+bridge_speed = 40
+infill_speed = 50
+perimeter_speed = 40
+support_material_speed = 40
+max_print_speed = 50
+skirt_distance = 10
+first_layer_speed = 25%
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
+
+[print:0.16mm OPTIMAL @SnapmakerA350]
+inherits = *common*
+layer_height = 0.16
+top_solid_layers = 6
+bottom_solid_layers = 6
+first_layer_speed = 25%
+max_print_speed = 60
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
+
+[print:0.20mm NORMAL @SnapmakerA350]
+inherits = *common*
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
+
+[print:0.20mm FAST @SnapmakerA350]
+inherits = 0.20mm NORMAL @SnapmakerA350
+bridge_speed = 80
+gap_fill_speed = 30
+infill_speed = 120
+ironing_speed = 20
+perimeter_speed = 80
+support_material_speed = 80
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A350"
+
+[print:0.08mm DETAIL @SnapmakerA250]
+inherits = 0.20mm NORMAL @SnapmakerA250
+layer_height = 0.08
+infill_speed = 40
+external_perimeter_speed = 10
+perimeter_speed = 15
+top_solid_infill_speed = 20
+travel_speed = 70
+first_layer_extrusion_width = 0.45
+perimeter_extrusion_width = 0.4
+external_perimeter_extrusion_width = 0.4
+infill_extrusion_width = 0.4
+solid_infill_extrusion_width = 0.4
+top_infill_extrusion_width = 0.4
+
+[print:0.20mm NORMAL @SnapmakerA250]
+inherits = *common*
+compatible_printers_condition = nozzle_diameter[0]==0.4 and printer_model=="A250"
+first_layer_speed = 15
+gap_fill_speed = 15
+infill_speed = 50
+perimeter_speed = 25
+small_perimeter_speed = 20
+external_perimeter_speed = 15
+support_material_speed = 25
+top_solid_infill_speed = 25
+travel_speed = 80
+max_print_speed = 80
+skirt_distance = 3
+min_skirt_length = 25
+
+[print:0.24mm FAST @SnapmakerA250]
+inherits = 0.20mm NORMAL @SnapmakerA250
+layer_height = 0.24
+infill_speed = 60
+external_perimeter_speed = 20
+top_solid_infill_speed = 30
+
+[filament:*common*]
+bed_temperature = 60
+bridge_fan_speed = 100
+compatible_printers = 
+compatible_printers_condition = 
+compatible_prints = 
+compatible_prints_condition = 
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_deretract_speed = nil
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 15
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_retract_before_travel = nil
+filament_retract_before_wipe = nil
+filament_retract_layer_change = nil
+filament_retract_length = nil
+filament_retract_lift = nil
+filament_retract_lift_above = nil
+filament_retract_lift_below = nil
+filament_retract_restart_extra = nil
+filament_retract_speed = nil
+filament_settings_id = ""
+filament_soluble = 0
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unload_time = 0
+filament_unloading_speed = 90
+filament_unloading_speed_start = 100
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+full_fan_speed_layer = 0
+inherits = 
+max_fan_speed = 100
+min_fan_speed = 35
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 210
+
+[filament:*PLA*]
+inherits = *common*
+
+[filament:*PETG*]
+inherits = *common*
+first_layer_bed_temperature = 80
+bed_temperature = 75
+first_layer_temperature = 245
+temperature = 245
+filament_density = 1.27
+disable_fan_first_layers = 3
+min_fan_speed = 20
+max_fan_speed = 50
+fan_below_layer_time = 20
+min_print_speed = 20
+filament_max_volumetric_speed = 8
+filament_type = PETG
+
+[filament:Generic PLA @Snapmaker]
+inherits = *PLA*
+filament_vendor = Generic
+
+[filament:Generic PETG @Snapmaker]
+inherits = *PETG*
+filament_vendor = Generic
+
+[filament:Snapmaker PLA @Snapmaker]
+inherits = *PLA*
+filament_vendor = Snapmaker
+
+[filament:Overture PLA @Snapmaker]
+inherits = *PLA*
+filament_vendor = Overture
+bed_temperature = 50
+first_layer_temperature = 205
+temperature = 205
+filament_density = 1.24
+disable_fan_first_layers = 1
+min_fan_speed = 100
+max_fan_speed = 100
+full_fan_speed_layer = 3
+fan_below_layer_time = 100
+min_print_speed = 15
+filament_max_volumetric_speed = 0
+
+[filament:MatterHackers Build Translucent @Snapmaker]
+inherits = *PETG*
+filament_vendor = MatterHackers
+
+[filament:MatterHackers Build White @Snapmaker]
+inherits = MatterHackers Build Translucent @Snapmaker
+bed_temperature = 65
+first_layer_bed_temperature = 70
+first_layer_temperature = 260
+temperature = 255
+filament_density = 1.28
+disable_fan_first_layers = 3
+full_fan_speed_layer = 5
+min_fan_speed = 40
+max_fan_speed = 100
+fan_below_layer_time = 60
+min_print_speed = 10
+
+[filament:Overture TPU @Snapmaker]
+inherits = *common*
+filament_vendor = Overture
+filament_type = FLEX
+first_layer_temperature = 220
+temperature = 220
+filament_density = 1.22
+disable_fan_first_layers = 1
+min_fan_speed = 100
+max_fan_speed = 100
+fan_below_layer_time = 100
+min_print_speed = 15
+filament_retract_speed = 40
+filament_deretract_speed = 25
+filament_retract_length = 1.8
+filament_max_volumetric_speed = 3
+
+# Common printer preset
+[printer:*common*]
+bed_shape = 0x0,320x0,320x350,0x350
+color_change_gcode = M600
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = ""
+default_print_profile = 
+end_gcode = ;End GCode begin\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off\nG90 ;absolute positioning\nG92 E0\nG1 E-2 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG28 X0 Y0 ; home\nM84 ;steppers off\nM107 ;fan off\nM82 ;absolute extrusion mode\n;End GCode end
+extra_loading_move = -2
+extruder_colour = ""
+extruder_offset = 0x0
+gcode_flavor = marlin
+high_current_on_filament_swap = 0
+machine_limits_usage = time_estimate_only
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1000
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_travel = 1500
+machine_max_acceleration_x = 3000
+machine_max_acceleration_y = 3000
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 25
+machine_max_feedrate_x = 150
+machine_max_feedrate_y = 150
+machine_max_feedrate_z = 50
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.3
+max_print_height = 330
+min_layer_height = 0.08
+nozzle_diameter = 0.4
+parking_pos_retraction = 92
+pause_print_gcode = 
+printer_technology = FFF
+remaining_times = 0
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 3
+retract_length_toolchange = 10
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 328
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 60
+deretract_speed = 40
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M82 ;absolute extrusion mode\n;Start GCode begin\nM140 S[first_layer_bed_temperature]   ;Start warming Bed\nM104 S[first_layer_temperature] ;Start warming Nozzle\nG28 ; home all axes\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000\nG1 Z0 F1800\nM190 S[first_layer_bed_temperature]   ;Wait For Bed Temperature\nM109 S[first_layer_temperature] ;Wait for Hotend Temperature\nG92 E0\nG1 E20 F200  ; Prime extrude for wipe\nG92 E0
+thumbnails = 16x16,220x124
+use_firmware_retraction = 0
+use_relative_e_distances = 0
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 0
+z_offset = 0
+
+[printer:Snapmaker A350]
+inherits = *common*
+printer_model = A350
+printer_variant = 0.4
+default_filament_profile = Generic PLA @Snapmaker
+default_print_profile = 0.20mm NORMAL @SnapmakerA350
+
+[printer:Snapmaker A250]
+inherits = *common*
+printer_model = A250
+printer_variant = 0.4
+bed_shape = 0x0,230x0,230x250,0x250
+thumbnails = 
+variable_layer_height = 0
+retract_lift_below = 0
+max_print_height = 235
+start_gcode = M82 ;absolute extrusion mode\n;Start GCode begin\nM140 S[first_layer_bed_temperature]   ;Start Warming Bed\nM104 S160 ;Preheat Nozzle\nG28 ; home all axes\nG90 ;absolute positioning\nG1 X-10 Y-10 F3000\nG1 Z0 F1800\nG1 Z5 F5000 ; lift nozzle\nM190 S[first_layer_bed_temperature]   ;Wait For Bed Temperature\nM109 S[first_layer_temperature] ;Wait for Hotend Temperature\nG92 E0\nG1 E10 F200\nG1 E-2 F300\nG92 E0\n;Start GCode end\nG1 F3600 E-2
+end_gcode = M140 S0\n;End GCode begin\nM104 S0 ;extruder heater off\nM140 S0 ;heated bed heater off (if you have it)\nG90 ;absolute positioning\nG92 E0\nG1 E-2 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure\nG1 Z330 E-1 F80 ;move Z up a bit and retract filament even more\nG1 X0 F3000 ;move X to min endstops, so the head is out of the way\nG1 Y250 F3000 ;so the head is out of the way and Plate is moved forward\nM84 ;steppers off\n;End GCode end\nM82 ;absolute extrusion mode\nM104 S0\nM107\n;End of Gcode
+default_filament_profile = Generic PLA @Snapmaker
+default_print_profile = 0.20mm NORMAL @SnapmakerA250

live/Snapmaker/index.idx

@@ -0,0 +1,2 @@
+min_slic3r_version = 2.4.1
+1.0.0 Initial Snapmaker bundle

live/Zonestar/1.0.0.ini

@@ -0,0 +1,744 @@
+# Zonestar print profiles
+
+# based on https://github.com/slic3r/slic3r-profiles/pull/19 by @ZONESTAR3D
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Zonestar
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 1.0.0
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Zonestar/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:Z5]
+name = Zonestar Z5
+variants = 0.4
+technology = FFF
+bed_model = bed_220.stl
+bed_texture = 220_texture.svg
+default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
+
+[printer_model:Z6]
+name = Zonestar Z6
+variants = 0.4
+technology = FFF
+bed_model = bed_150.stl
+bed_texture = 150_texture.svg
+default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
+
+[printer_model:Z5X]
+name = Zonestar Z5X
+variants = 0.4
+technology = FFF
+bed_model = bed_310.stl
+bed_texture = 310_texture.svg
+default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
+
+[printer_model:Z8]
+name = Zonestar Z8
+variants = 0.4
+technology = FFF
+bed_model = bed_310.stl
+bed_texture = 310_texture.svg
+default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
+
+[printer_model:Z9]
+name = Zonestar Z9
+variants = 0.4
+technology = FFF
+bed_model = bed_310.stl
+bed_texture = 310_texture.svg
+default_materials = Generic PLA @Zonestar; Generic ABS @Zonestar; Generic PETG @Zonestar; Generic TPU @Zonestar
+
+###################
+####   print   ####
+###################
+
+[print:*common*]
+avoid_crossing_perimeters = 0
+avoid_crossing_perimeters_max_detour = 0
+bottom_fill_pattern = monotonic
+bottom_solid_layers = 4
+bottom_solid_min_thickness = 0
+bridge_acceleration = 0
+bridge_angle = 0
+bridge_flow_ratio = 1
+bridge_speed = 60
+brim_separation = 0
+brim_type = outer_only
+brim_width = 4
+clip_multipart_objects = 1
+complete_objects = 0
+default_acceleration = 0
+dont_support_bridges = 1
+draft_shield = disabled
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 50%
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_acceleration = 0
+first_layer_acceleration_over_raft = 0
+first_layer_extrusion_width = 0.45
+first_layer_height = 0.3
+first_layer_speed = 25
+first_layer_speed_over_raft = 30
+fuzzy_skin = none
+fuzzy_skin_point_dist = 0.8
+fuzzy_skin_thickness = 0.3
+gap_fill_enabled = 1
+gap_fill_speed = 20
+gcode_comments = 0
+gcode_label_objects = 0
+gcode_resolution = 0.0125
+gcode_substitutions = 
+infill_acceleration = 0
+infill_anchor = 600%
+infill_anchor_max = 50
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+inherits = 
+interface_shells = 0
+ironing = 0
+ironing_flowrate = 15%
+ironing_spacing = 0.1
+ironing_speed = 15
+ironing_type = top
+layer_height = 0.2
+max_print_speed = 80
+max_volumetric_speed = 0
+min_skirt_length = 0
+mmu_segmented_region_max_width = 0
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {printer_model}_{input_filename_base}.gcode
+overhangs = 1
+perimeter_acceleration = 0
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 50
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_contact_distance = 0.1
+raft_expansion = 1.5
+raft_first_layer_density = 90%
+raft_first_layer_expansion = 3
+raft_layers = 0
+resolution = 0
+seam_position = aligned
+single_extruder_multi_material_priming = 0
+skirt_distance = 6
+skirt_height = 1
+skirts = 0
+slice_closing_radius = 0.049
+slicing_mode = regular
+small_perimeter_speed = 15
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 20
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_auto = 1
+support_material_bottom_contact_distance = 0
+support_material_bottom_interface_layers = -1
+support_material_buildplate_only = 0
+support_material_closing_radius = 2
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_contact_loops = 0
+support_material_interface_extruder = 1
+support_material_interface_layers = 3
+support_material_interface_pattern = rectilinear
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2.5
+support_material_speed = 60
+support_material_style = grid
+support_material_synchronize_layers = 0
+support_material_threshold = 0
+support_material_with_sheath = 1
+support_material_xy_spacing = 50%
+thick_bridges = 1
+thin_walls = 0
+threads = 4
+top_fill_pattern = monotonic
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 15
+top_solid_layers = 5
+top_solid_min_thickness = 0
+travel_speed = 100
+travel_speed_z = 0
+wipe_tower = 0
+xy_size_compensation = 0
+compatible_printers_condition = nozzle_diameter[0]==0.4 and num_extruders==1
+
+[print:0.20mm @Zonestar MULTI]
+inherits = *common*
+wipe_tower = 1
+wipe_tower_x = 125
+wipe_tower_y = 195
+compatible_printers_condition = nozzle_diameter[0]==0.4 and num_extruders>1
+
+
+[print:0.20mm @Zonestar SINGLE]
+inherits = *common*
+
+###################
+#### filament  ####
+###################
+[filament:Generic ABS @Zonestar]
+bed_temperature = 100
+bridge_fan_speed = 30
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_load_time = 0
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_minimal_purge_on_wipe_tower = 50
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_type = ABS
+filament_unloading_speed = 40
+filament_unloading_speed_start = 60
+filament_vendor = Generic
+first_layer_bed_temperature = 100
+first_layer_temperature = 245
+max_fan_speed = 0
+min_fan_speed = 0
+min_print_speed = 15
+slowdown_below_layer_time = 25
+temperature = 245
+
+[filament:Generic PETG @Zonestar]
+bed_temperature = 70
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+end_filament_gcode = "; Filament-specific end gcode \n;END gcode for filament\n"
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 50
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_spool_weight = 0
+filament_toolchange_delay = 0
+filament_type = PETG
+filament_unloading_speed = 40
+filament_unloading_speed_start = 60
+filament_vendor = Generic
+first_layer_bed_temperature = 70
+first_layer_temperature = 210
+full_fan_speed_layer = 0
+max_fan_speed = 50
+min_fan_speed = 25
+min_print_speed = 10
+slowdown_below_layer_time = 5
+start_filament_gcode = "; Filament gcode\n"
+temperature = 210
+
+[filament:Generic PLA @Zonestar]
+bed_temperature = 60
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 1
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 0
+filament_minimal_purge_on_wipe_tower = 50
+filament_notes = ""
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_toolchange_delay = 0
+filament_type = PLA
+filament_unloading_speed = 40
+filament_unloading_speed_start = 60
+filament_vendor = Generic
+filament_wipe = nil
+first_layer_bed_temperature = 60
+first_layer_temperature = 200
+full_fan_speed_layer = 5
+max_fan_speed = 100
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 5
+temperature = 200
+
+[filament:Generic TPU @Zonestar]
+bed_temperature = 50
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+extrusion_multiplier = 1
+fan_always_on = 0
+fan_below_layer_time = 60
+filament_colour = #29B2B2
+filament_cooling_final_speed = 3.4
+filament_cooling_initial_speed = 2.2
+filament_cooling_moves = 4
+filament_diameter = 1.75
+filament_loading_speed = 28
+filament_loading_speed_start = 3
+filament_max_volumetric_speed = 3
+filament_minimal_purge_on_wipe_tower = 50
+filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+filament_toolchange_delay = 0
+filament_type = FLEX
+filament_unloading_speed = 30
+filament_unloading_speed_start = 30
+filament_vendor = Generic
+first_layer_bed_temperature = 50
+first_layer_temperature = 225
+full_fan_speed_layer = 0
+max_fan_speed = 100
+min_fan_speed = 50
+min_print_speed = 10
+slowdown_below_layer_time = 5
+temperature = 225
+
+###################
+####  printer  ####
+###################
+[printer:*common*]
+printer_technology = FFF
+before_layer_gcode = 
+between_objects_gcode = 
+color_change_gcode = M600
+cooling_tube_retraction = 35
+default_filament_profile = 
+default_print_profile = 
+deretract_speed = 
+end_gcode = 
+extra_loading_move = -2
+gcode_flavor = marlin2
+high_current_on_filament_swap = 0
+host_type = octoprint
+layer_gcode = 
+machine_limits_usage = ignore
+machine_max_acceleration_e = 10000
+machine_max_acceleration_extruding = 1500
+machine_max_acceleration_retracting = 1500
+machine_max_acceleration_travel = 1500
+machine_max_acceleration_x = 9000
+machine_max_acceleration_y = 9000
+machine_max_acceleration_z = 500
+machine_max_feedrate_e = 120
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 12
+machine_max_jerk_e = 2.5
+machine_max_jerk_x = 10
+machine_max_jerk_y = 10
+machine_max_jerk_z = 0.2
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+max_layer_height = 0.3
+min_layer_height = 0.1
+nozzle_diameter = 0.4
+pause_print_gcode = 
+remaining_times = 0
+retract_speed = 40
+silent_mode = 0
+single_extruder_multi_material = 0
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 0
+wipe = 0
+z_offset = 0
+
+[printer:Zonestar Z5+M2 HOTEND]
+inherits = *common*
+printer_model = Z5
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar MULTI
+deretract_speed = 30,30
+before_layer_gcode = G92 E0
+end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #FF0000;#00FF00
+extruder_offset = 0x0,0x0
+max_layer_height = 0.3,0.3
+max_print_height = 220
+min_layer_height = 0.15,0.15
+nozzle_diameter = 0.4,0.4
+retract_before_travel = 2,2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 10,10
+retract_length_toolchange = 0,0
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 35,35
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 1
+wipe = 0,0
+
+
+[printer:Zonestar Z6]
+inherits = *common*
+printer_model = Z6
+printer_variant = 0.4
+bed_shape = 0x0,150x0,150x150,0x150
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar SINGLE
+deretract_speed = 30
+end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #00FF00
+extruder_offset = 0x0
+min_layer_height = 0.1
+max_layer_height = 0.3
+max_print_height = 150
+nozzle_diameter = 0.4
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 6.5
+retract_length_toolchange = 0
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000; lift nozzle\nG1 X5 Y5 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y100 E8 F600 ; prime nozzle\nG1 Y50 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 0
+
+[printer:Zonestar Z5X]
+inherits = *common*
+printer_model = Z5X
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar SINGLE
+deretract_speed = 30
+end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #00FF00
+extruder_offset = 0x0
+min_layer_height = 0.1
+max_layer_height = 0.3
+max_print_height = 400
+nozzle_diameter = 0.4
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 6.5
+retract_length_toolchange = 0
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000; lift nozzle\nG1 X5 Y5 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y50 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 0
+
+#Z8 with different types of hotend
+[printer:Zonestar Z8+M3 HOTEND]
+inherits = *common*
+printer_model = Z8
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar MULTI
+deretract_speed = 30,30,30
+before_layer_gcode = G92 E0
+end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #FF0000;#00FF00;#0000FF
+extruder_offset = 0x0,0x0,0x0
+max_layer_height = 0.3,0.3,0.3
+max_print_height = 400
+min_layer_height = 0.15,0.15,0.15
+nozzle_diameter = 0.4,0.4,0.4
+retract_before_travel = 2,2,2
+retract_before_wipe = 0%,0%,0%
+retract_layer_change = 0,0,0
+retract_length = 10,10,10
+retract_length_toolchange = 0,0,0
+retract_lift = 0,0,0
+retract_lift_above = 0,0,0
+retract_lift_below = 0,0,0
+retract_restart_extra = 0,0,0
+retract_restart_extra_toolchange = 0,0,0
+retract_speed = 35,35,35
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 1
+wipe = 0,0,0
+layer_gcode = G92 E0
+
+[printer:Zonestar Z8+M4 HOTEND]
+inherits = *common*
+printer_model = Z8
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar MULTI
+deretract_speed = 30,30,30,30
+before_layer_gcode = G92 E0
+end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
+extruder_offset = 0x0,0x0,0x0,0x0
+max_layer_height = 0.3,0.3,0.3,0.3
+max_print_height = 400
+min_layer_height = 0.15,0.15,0.15,0.15
+nozzle_diameter = 0.4,0.4,0.4,0.4
+retract_before_travel = 2,2,2,2
+retract_before_wipe = 0%,0%,0%,0%
+retract_layer_change = 0,0,0,0
+retract_length = 10,10,10,10
+retract_length_toolchange = 0,0,0,0
+retract_lift = 0,0,0,0
+retract_lift_above = 0,0,0,0
+retract_lift_below = 0,0,0,0
+retract_restart_extra = 0,0,0,0
+retract_restart_extra_toolchange = 0,0,0,0
+retract_speed = 35,35,35,35
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 1
+wipe = 0,0,0,0
+layer_gcode = G92 E0
+
+[printer:Zonestar Z8+E4 HOTEND]
+inherits = *common*
+printer_model = Z8
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar MULTI
+deretract_speed = 30,30,30,30
+before_layer_gcode = G92 E0
+end_gcode = G1 E-30 F2100 ;pull out filament\nG28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
+extruder_offset = 0x0,0x0,0x0,0x0
+max_layer_height = 0.3,0.3,0.3,0.3
+max_print_height = 400
+min_layer_height = 0.1,0.1,0.1,0.1
+nozzle_diameter = 0.4,0.4,0.4,0.4
+retract_before_travel = 2,2,2,2
+retract_before_wipe = 0%,0%,0%,0%
+retract_layer_change = 0,0,0,0
+retract_length = 8,8,8,8
+retract_length_toolchange = 0,0,0,0
+retract_lift = 0,0,0,0
+retract_lift_above = 0,0,0,0
+retract_lift_below = 0,0,0,0
+retract_restart_extra = 0,0,0,0
+retract_restart_extra_toolchange = 0,0,0,0
+retract_speed = 35,35,35,35
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+toolchange_gcode = G92 E0\nG1 E-30 F1200;pull filament\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E15 F1800; push filament-1\nG1 E25 F900; pushfilament-2\nG1 E29 F1200; push filament-3\nG92 E0
+use_relative_e_distances = 1
+wipe = 0,0,0,0
+layer_gcode = G92 E0
+
+[printer:Zonestar Z8+DDE]
+inherits = *common*
+printer_model = Z8
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic TPU @Zonestar
+default_print_profile = 0.20mm @Zonestar SINGLE
+deretract_speed = 30
+end_gcode = G28 X\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #00FF00
+extruder_offset = 0x0
+max_layer_height = 0.3
+max_print_height = 400
+min_layer_height = 0.1
+nozzle_diameter = 0.4
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 6.5
+retract_length_toolchange = 0
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 0
+
+#Z9 with different types of hotend
+[printer:Zonestar Z9+M3 HOTEND]
+inherits = *common*
+printer_model = Z9
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar MULTI
+deretract_speed = 30,30,30
+before_layer_gcode = G92 E0
+end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #FF0000;#00FF00;#0000FF
+extruder_offset = 0x0,0x0,0x0
+max_layer_height = 0.3,0.3,0.3
+max_print_height = 400
+min_layer_height = 0.15,0.15,0.15
+nozzle_diameter = 0.4,0.4,0.4
+retract_before_travel = 2,2,2
+retract_before_wipe = 0%,0%,0%
+retract_layer_change = 0,0,0
+retract_length = 10,10,10
+retract_length_toolchange = 0,0,0
+retract_lift = 0,0,0
+retract_lift_above = 0,0,0
+retract_lift_below = 0,0,0
+retract_restart_extra = 0,0,0
+retract_restart_extra_toolchange = 0,0,0
+retract_speed = 35,35,35
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 1
+wipe = 0,0,0
+layer_gcode = G92 E0
+
+[printer:Zonestar Z9+M4 HOTEND]
+inherits = *common*
+printer_model = Z9
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar MULTI
+deretract_speed = 30,30,30,30
+before_layer_gcode = G92 E0
+end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
+extruder_offset = 0x0,0x0,0x0,0x0
+max_layer_height = 0.3,0.3,0.3,0.3
+max_print_height = 400
+min_layer_height = 0.15,0.15,0.15,0.15
+nozzle_diameter = 0.4,0.4,0.4,0.4
+retract_before_travel = 2,2,2,2
+retract_before_wipe = 0%,0%,0%,0%
+retract_layer_change = 0,0,0,0
+retract_length = 10,10,10,10
+retract_length_toolchange = 0,0,0,0
+retract_lift = 0,0,0,0
+retract_lift_above = 0,0,0,0
+retract_lift_below = 0,0,0,0
+retract_restart_extra = 0,0,0,0
+retract_restart_extra_toolchange = 0,0,0,0
+retract_speed = 35,35,35,35
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 1
+wipe = 0,0,0,0
+layer_gcode = G92 E0
+
+[printer:Zonestar Z9+E4 HOTEND]
+inherits = *common*
+printer_model = Z9
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic PLA @Zonestar
+default_print_profile = 0.20mm @Zonestar MULTI
+deretract_speed = 30,30,30,30
+before_layer_gcode = G92 E0
+end_gcode = G1 E-30 F2100 ;pull out filament\nG28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #E0E0E0;#FF0000;#00FF00;#0000FF
+extruder_offset = 0x0,0x0,0x0,0x0
+max_layer_height = 0.3,0.3,0.3,0.3
+max_print_height = 400
+min_layer_height = 0.1,0.1,0.1,0.1
+nozzle_diameter = 0.4,0.4,0.4,0.4
+retract_before_travel = 2,2,2,2
+retract_before_wipe = 0%,0%,0%,0%
+retract_layer_change = 0,0,0,0
+retract_length = 8,8,8,8
+retract_length_toolchange = 0,0,0,0
+retract_lift = 0,0,0,0
+retract_lift_above = 0,0,0,0
+retract_lift_below = 0,0,0,0
+retract_restart_extra = 0,0,0,0
+retract_restart_extra_toolchange = 0,0,0,0
+retract_speed = 35,35,35,35
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nT[initial_tool]\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+toolchange_gcode = G92 E0\nG1 E-30 F1200;pull filament\nG92 E0\nT[next_extruder];Change extruder\nG92 E0\nG1 E15 F1800; push filament-1\nG1 E25 F900; pushfilament-2\nG1 E29 F1200; push filament-3\nG92 E0
+use_relative_e_distances = 1
+wipe = 0,0,0,0
+layer_gcode = G92 E0
+
+[printer:Zonestar Z9+DDE]
+inherits = *common*
+printer_model = Z9
+printer_variant = 0.4
+bed_shape = 0x0,310x0,310x310,0x310
+default_filament_profile = Generic TPU @Zonestar
+default_print_profile = 0.20mm @Zonestar SINGLE
+deretract_speed = 30
+end_gcode = G28 XY\nM106 S0 ; turn off FAN\nM104 S0 ; turn off extruder\nM140 S0 ; turn off bed\nM84 ; disable motors
+extruder_colour = #00FF00
+extruder_offset = 0x0
+max_layer_height = 0.3
+max_print_height = 400
+min_layer_height = 0.1
+nozzle_diameter = 0.4
+retract_before_travel = 2
+retract_before_wipe = 0%
+retract_layer_change = 0
+retract_length = 6.5
+retract_length_toolchange = 0
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 40
+start_gcode = M104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 ; home all axes\nG1 Z5 F3000 ; lift nozzle\nG1 X5 Y10 F1500 ; move to prime\nG1 Z0.2 F3000 ; get ready to prime\nG92 E0 ; reset extrusion distance\nG1 Y200 E15 F600 ; prime nozzle\nG1 Y100 F5000 ; quick wipe\nG92 E0
+use_relative_e_distances = 0

live/Zonestar/index.idx

@@ -0,0 +1,2 @@
+min_slic3r_version = 2.4.1
+1.0.0 Initial version