Added new print settings for 0.15mm and 0.25mm nozzle

Slic3r settings MK2/print/0.15mm OPTIMAL.ini

@@ -0,0 +1,92 @@
+# generated by Slic3r 1.31.1.3-prusa3d-win64 on Tue Oct 25 15:41:30 2016
+avoid_crossing_perimeters = 0
+bottom_solid_layers = 7
+bridge_acceleration = 1000
+bridge_flow_ratio = 0.8
+bridge_speed = 20
+brim_width = 0
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 20
+extruder_clearance_radius = 20
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 10%
+fill_pattern = grid
+first_layer_acceleration = 1000
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.15
+first_layer_speed = 70%
+gap_fill_speed = 40
+gcode_comments = 0
+infill_acceleration = 2000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 60
+interface_shells = 0
+layer_height = 0.15
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = [input_filename_base].gcode
+overhangs = 0
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+perimeters = 3
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+skirt_distance = 2
+skirt_height = 1
+skirts = 1
+small_perimeter_speed = 20
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_contact_distance = 0.2
+support_material_enforce_layers = 0
+support_material_extruder = 1
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 1
+support_material_interface_layers = 0
+support_material_interface_spacing = 0
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 1.5
+support_material_speed = 50
+support_material_threshold = 40
+support_material_with_sheath = 0
+thin_walls = 0
+threads = 4
+top_infill_extrusion_width = 0.45
+top_solid_infill_speed = 30
+top_solid_layers = 9
+travel_speed = 120
+xy_size_compensation = 0

Slic3r settings MK2/printer/Original Prusa i3 MK2 0.25 nozzle with ZHop.ini

@@ -0,0 +1,31 @@
+# generated by Slic3r 1.31.1-prusa3d-win64 on Mon Oct 24 12:11:37 2016
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = 
+end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+nozzle_diameter = 0.25
+octoprint_apikey = 
+octoprint_host = 
+pressure_advance = 0
+printer_settings_id = 
+retract_before_travel = 1
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 3
+retract_lift = 0.5
+retract_lift_above = 1
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 50
+serial_port = 
+serial_speed = 250000
+start_gcode = M115 U3.0.8 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+wipe = 1
+z_offset = 0