Added Eolas Prints filaments.

live/Anycubic/index.idx

@@ -1,4 +1,5 @@
 min_slic3r_version = 2.6.0-alpha2
+0.2.1 Added Eolas Prints filaments.
 0.2.0 Added Photon Mono X printer.
 min_slic3r_version = 2.4.1-rc1
 0.1.2 Added VOXELPLA filament profile.

live/Artillery/0.0.7.ini

@@ -0,0 +1,576 @@
+###############
+# AUTHOR: Szabolcs Hornyak / design85@gmail.com
+# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-genius/
+###############
+
+## Artillery Hornet printer profile is based on PR https://github.com/slic3r/slic3r-profiles/pull/14 created by https://github.com/newbeetle
+
+# Print profiles for the Artillery printers.
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Artillery
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 0.0.7
+# Where to get the updates from?
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Artillery/
+# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+#############
+## PRINTER ##
+#############
+
+[printer_model:X1]
+name = Artillery Sidewinder X1
+variants = 0.4
+technology = FFF
+bed_model = bed-x1.stl
+bed_texture = bed-x1.png
+default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
+
+[printer_model:Genius]
+name = Artillery Genius
+variants = 0.4
+technology = FFF
+bed_model = bed-genius.stl
+bed_texture = bed-genius.png
+default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
+
+[printer_model:Hornet]
+name = Artillery Hornet
+variants = 0.4
+technology = FFF
+bed_model = bed-hornet.stl
+bed_texture = bed-hornet.png
+default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery
+
+# Common printer preset
+[printer:*common*]
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
+between_objects_gcode = 
+cooling_tube_length = 5
+cooling_tube_retraction = 91.5
+default_filament_profile = Generic PLA @Artillery
+default_print_profile = 0.20mm NORMAL @Artillery
+deretract_speed = 0
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = marlin
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+machine_limits_usage = emit_to_gcode
+machine_max_acceleration_e = 5000,5000
+machine_max_acceleration_extruding = 1250,1250
+machine_max_acceleration_retracting = 1250,1250
+machine_max_acceleration_x = 1000,960
+machine_max_acceleration_y = 1000,960
+machine_max_acceleration_z = 1000,1000
+machine_max_feedrate_e = 120,120
+machine_max_feedrate_x = 200,100
+machine_max_feedrate_y = 200,100
+machine_max_feedrate_z = 12,12
+machine_max_jerk_e = 1.5,1.5
+machine_max_jerk_x = 8,8
+machine_max_jerk_y = 8,8
+machine_max_jerk_z = 0.4,0.4
+machine_min_extruding_rate = 0,0
+machine_min_travel_rate = 0,0
+max_layer_height = 0.25
+max_print_height = 250
+min_layer_height = 0.07
+nozzle_diameter = 0.4
+pause_print_gcode = 
+printer_technology = FFF
+remaining_times = 0
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 4
+retract_lift = 0.6
+retract_lift_above = 0
+retract_lift_below = 380
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+silent_mode = 0
+single_extruder_multi_material = 0
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+end_gcode = G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n
+
+[printer:*common_STOCK_FW*]
+inherits = *common*
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
+
+[printer:*common_UPD_FW*]
+inherits = *common*
+start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12 ; K factor\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S[first_layer_temperature] ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S[first_layer_temperature] ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}
+
+[printer:*bowden*]
+inherits = *common_STOCK_FW*
+retract_length = 5
+retract_lift = 0.1
+retract_before_wipe = 50%
+default_filament_profile = Generic PLA @Artillery
+
+[printer:*0.4nozzle*]
+nozzle_diameter = 0.4
+max_layer_height = 0.32
+min_layer_height = 0.04
+printer_variant = 0.4
+default_print_profile = 0.20mm NORMAL @Artillery
+
+[printer:Artillery Sidewinder X1]
+inherits = *common_STOCK_FW*
+renamed_from = "Sidewinder X1"
+printer_model = X1
+printer_variant = 0.4
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 400
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1
+
+[printer:Artillery Sidewinder X1 BL-TOUCH]
+inherits = *common_UPD_FW*
+renamed_from = "Sidewinder X1 BL-TOUCH"
+printer_model = X1
+printer_variant = 0.4
+bed_shape = 0x0,300x0,300x300,0x300
+max_print_height = 400
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1
+
+[printer:Artillery Genius]
+inherits = *common_STOCK_FW*
+renamed_from = "Genius"
+printer_model = Genius
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius
+
+[printer:Artillery Genius BL-TOUCH]
+inherits = *common_UPD_FW*
+renamed_from = "Genius BL-TOUCH"
+printer_model = Genius
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius
+
+[printer:Artillery Hornet]
+inherits = *bowden*
+printer_model = Hornet
+printer_variant = 0.4
+bed_shape = 0x0,220x0,220x220,0x220
+max_print_height = 250
+machine_limits_usage = time_estimate_only
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Hornet\nPRINTER_HAS_Bowden
+
+###########
+## PRINT ##
+###########
+# Common print preset
+[print:*common*]
+# V2.2 #
+#bottom_fill_pattern = rectilinear
+#top_fill_pattern = rectilinear
+#fill_pattern = cubic
+# V2.3 #
+top_fill_pattern = monotonic
+bottom_fill_pattern = monotonic
+fill_pattern = adaptivecubic
+
+avoid_crossing_perimeters = 0
+bridge_acceleration = 1000
+bridge_angle = 0
+bridge_flow_ratio = 0.78
+bridge_speed = 20
+# brim_width = 5
+bottom_solid_min_thickness = 1.2
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+default_acceleration = 1000
+dont_support_bridges = 1
+elefant_foot_compensation = 0
+ensure_vertical_shell_thickness = 1
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+external_perimeters_first = 0
+extra_perimeters = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 15%
+first_layer_acceleration = 500
+first_layer_extrusion_width = 0.42
+first_layer_height = 150%
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 1
+gcode_label_objects = 1
+infill_acceleration = 1000
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+interface_shells = 0
+max_print_speed = 150
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 1
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeters = 3
+perimeter_acceleration = 800
+perimeter_extruder = 1
+perimeter_extrusion_width = 0
+perimeter_speed = 45
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirts = 1
+skirt_distance = 6
+skirt_height = 1
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 50
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.35
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 50
+support_material_synchronize_layers = 0
+support_material_threshold = 55
+support_material_with_sheath = 0
+support_material_xy_spacing = 50%
+thin_walls = 1
+travel_speed = 130
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 125
+xy_size_compensation = 0
+
+[print:*0.08mm*]
+inherits = *common*
+default_acceleration = 500
+layer_height = 0.08
+perimeters = 3
+bottom_solid_layers = 9
+top_solid_layers = 11
+
+[print:*0.10mm*]
+inherits = *common*
+default_acceleration = 500
+layer_height = 0.1
+perimeters = 3
+bottom_solid_layers = 7
+top_solid_layers = 9
+
+[print:*0.12mm*]
+inherits = *common*
+default_acceleration = 500
+layer_height = 0.12
+perimeters = 3
+bottom_solid_layers = 6
+top_solid_layers = 7
+
+[print:*0.16mm*]
+inherits = *common*
+layer_height = 0.16
+bottom_solid_layers = 5
+top_solid_layers = 7
+
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.20
+bottom_solid_layers = 4
+top_solid_layers = 5
+
+[print:*0.24mm*]
+inherits = *common*
+layer_height = 0.24
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:*0.28mm*]
+inherits = *common*
+layer_height = 0.28
+first_layer_height = 0.36
+top_infill_extrusion_width = 0.45
+first_layer_extrusion_width = 0.75
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:0.08mm SUPERDETAIL @Artillery]
+inherits = *0.08mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+
+[print:0.10mm HIGHDETAIL @Artillery]
+inherits = *0.10mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+
+[print:0.12mm DETAIL @Artillery]
+inherits = *0.12mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+
+[print:0.16mm OPTIMAL @Artillery]
+inherits = *0.16mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+
+[print:0.20mm SLOW @Artillery]
+inherits = *0.20mm*
+external_perimeter_speed = 15
+fill_density = 20%
+gap_fill_speed = 25
+infill_speed = 50
+perimeter_speed = 30
+perimeters = 3
+solid_infill_speed = 50
+top_solid_infill_speed = 25
+first_layer_speed = 15
+travel_speed = 100
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+
+[print:0.20mm NORMAL @Artillery]
+inherits = *0.20mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+
+[print:0.20mm SPEED @Artillery]
+inherits = *0.20mm*
+external_perimeter_speed = 35
+fill_density = 15%
+fill_pattern = grid
+gap_fill_speed = 45
+infill_speed = 150
+infill_only_where_needed = 1
+perimeter_speed = 60
+perimeters = 2
+solid_infill_speed = 150
+top_solid_infill_speed = 50
+travel_speed = 170
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+
+[print:0.24mm DRAFT @Artillery]
+inherits = *0.24mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+
+[print:0.28mm SUPERDRAFT @Artillery]
+inherits = *0.28mm*
+compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4
+
+###############
+## FILAMENTS ##
+###############
+
+# Common filament preset
+[filament:*common*]
+cooling = 1
+compatible_printers = 
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 15
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Artillery.*/
+
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 60
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 1
+fan_always_on = 1
+fan_below_layer_time = 100
+filament_colour = #428AF5
+filament_cost = 20
+filament_density = 1.24
+filament_max_volumetric_speed = 15
+filament_type = PLA
+first_layer_bed_temperature = 65
+first_layer_temperature = 210
+full_fan_speed_layer = 3
+max_fan_speed = 100
+min_fan_speed = 100
+temperature = 205
+
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+bridge_fan_speed = 100
+cooling = 1
+disable_fan_first_layers = 3
+fan_always_on = 1
+fan_below_layer_time = 20
+filament_colour = #42E9F5
+filament_cost = 30
+filament_density = 1.27
+filament_max_volumetric_speed = 8
+filament_type = PETG
+first_layer_bed_temperature = 70
+first_layer_temperature = 235
+max_fan_speed = 50
+min_fan_speed = 20
+temperature = 230
+
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 90
+bridge_fan_speed = 30
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #6603FC
+filament_cost = 20
+filament_density = 1.04
+filament_max_volumetric_speed = 11
+filament_type = ABS
+first_layer_bed_temperature = 90
+first_layer_temperature = 240
+max_fan_speed = 0
+min_fan_speed = 0
+temperature = 240
+top_fan_speed = 0
+
+[filament:*TPU*]
+inherits = *common*
+bed_temperature = 55
+cooling = 0
+disable_fan_first_layers = 3
+fan_always_on = 0
+fan_below_layer_time = 20
+filament_colour = #CFFFFB
+filament_cost = 30
+filament_density = 1.2
+filament_max_volumetric_speed = 11
+filament_retract_before_travel = 4
+filament_retract_length = 2.5
+filament_retract_speed = 30
+filament_type = TPU
+first_layer_bed_temperature = 55
+first_layer_temperature = 210
+max_fan_speed = 70
+min_fan_speed = 0
+
+[filament:Generic PLA @Artillery]
+inherits = *PLA*
+filament_vendor = Generic
+
+[filament:Generic PETG @Artillery]
+inherits = *PET*
+filament_vendor = Generic
+
+[filament:Generic ABS @Artillery]
+inherits = *ABS*
+filament_vendor = Generic
+
+[filament:Generic TPU @Artillery]
+inherits = *TPU*
+filament_vendor = Generic
+
+[filament:Eolas Prints PLA @Artillery]
+inherits = *PLA*
+filament_vendor = Eolas Prints
+filament_cost = 23.50
+filament_density = 1.24
+filament_spool_weight = 0
+filament_colour = #4D9398
+first_layer_bed_temperature = 65
+first_layer_temperature = 208
+temperature = 202
+
+[filament:Eolas Prints PLA Matte @Artillery]
+inherits = Eolas Prints PLA @Artillery
+filament_cost = 25.50
+filament_max_volumetric_speed = 14
+temperature = 210
+
+[filament:Eolas Prints INGEO 850 @Artillery]
+inherits = Eolas Prints PLA @Artillery
+filament_cost = 25.90
+temperature = 210
+
+[filament:Eolas Prints INGEO 870 @Artillery]
+inherits = Eolas Prints PLA @Artillery
+filament_cost = 25.90
+temperature = 215
+first_layer_bed_temperature = 68
+first_layer_temperature = 220
+bed_temperature = 65
+
+[filament:Eolas Prints PETG @Artillery]
+inherits = *PET*
+filament_vendor = Eolas Prints
+filament_cost = 29.90
+filament_density = 1.27
+filament_spool_weight = 0
+filament_colour = #4D9398
+temperature = 240
+first_layer_bed_temperature = 85
+first_layer_temperature = 235
+bed_temperature = 90
+
+[filament:Eolas Prints PETG - UV Resistant @Artillery]
+inherits = Eolas Prints PETG @Artillery
+filament_cost = 35.90
+temperature = 242
+first_layer_temperature = 237
+
+[filament:Eolas Prints TPU 93A @Artillery]
+inherits = *TPU*
+filament_vendor = Eolas Prints
+filament_cost = 34.99
+filament_density = 1.21
+filament_colour = #4D9398
+filament_max_volumetric_speed = 1.2
+temperature = 230
+first_layer_bed_temperature = 30
+bed_temperature = 30
+filament_retract_length = 0
+extrusion_multiplier = 1.16

live/Artillery/index.idx

@@ -1,4 +1,5 @@
 min_slic3r_version = 2.4.1-alpha0
+0.0.7 Added Eolas Prints filaments.
 0.0.6 Reduced retract_length for direct extruders
 0.0.5 Added Artillery Hornet
 min_slic3r_version = 2.3.1-beta

live/Creality/index.idx

@@ -1,4 +1,5 @@
 min_slic3r_version = 2.6.0-alpha0
+0.2.7 Added Eolas Prints filaments.
 0.2.6 Add Ender-5 Pro, Ender-5 S1, Sermoon-V1, Sermoon-V1 Pro. Unlock HIGHSPEED/SUPERSPEED presets for Ender-5 S1/Ender-6/Ender-7.
 min_slic3r_version = 2.5.0-alpha0
 0.2.4 Add SPEED presets. More conservative extruder clearance.

live/Elegoo/1.0.3.ini

@@ -0,0 +1,596 @@
+# PrusaSlicer print profiles for the Elegoo printers.
+# By Andrew Suzuki (andrewsuzuki.com), adapted from Creality.ini
+
+[vendor]
+# Vendor name will be shown by the Config Wizard.
+name = Elegoo
+# Configuration version of this file. Config file will only be installed, if the config_version differs.
+# This means, the server may force the PrusaSlicer configuration to be downgraded.
+config_version = 1.0.3
+config_update_url = https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Elegoo/
+
+# The printer models will be shown by the Configuration Wizard in this order,
+# also the first model installed & the first nozzle installed will be activated after install.
+# Printer model name will be shown by the installation wizard.
+
+[printer_model:NEPTUNE1]
+name = Elegoo Neptune-1
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNE2]
+name = Elegoo Neptune-2
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNE2D]
+name = Elegoo Neptune-2D
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNE2S]
+name = Elegoo Neptune-2S
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNE3]
+name = Elegoo Neptune-3
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNE3MAX]
+name = Elegoo Neptune-3 Max
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNE3PLUS]
+name = Elegoo Neptune-3 Plus
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNE3PRO]
+name = Elegoo Neptune-3 Pro
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+[printer_model:NEPTUNEX]
+name = Elegoo Neptune-X
+variants = 0.4
+technology = FFF
+family = NEPTUNE
+bed_model = 
+bed_texture = 
+default_materials = Generic PLA @ELEGOO; Generic PETG @ELEGOO; Generic ABS @ELEGOO
+
+# All presets starting with asterisk, for example *common*, are intermediate and they will
+# not make it into the user interface.
+
+# Common print preset
+[print:*common*]
+avoid_crossing_perimeters = 0
+bridge_angle = 0
+bridge_flow_ratio = 0.95
+bridge_speed = 25
+brim_width = 0
+clip_multipart_objects = 1
+compatible_printers = 
+complete_objects = 0
+dont_support_bridges = 1
+elefant_foot_compensation = 0.1
+ensure_vertical_shell_thickness = 1
+external_fill_pattern = rectilinear
+external_perimeters_first = 0
+external_perimeter_extrusion_width = 0.45
+external_perimeter_speed = 25
+extra_perimeters = 0
+extruder_clearance_height = 25
+extruder_clearance_radius = 45
+extrusion_width = 0.45
+fill_angle = 45
+fill_density = 20%
+fill_pattern = grid
+first_layer_extrusion_width = 0.42
+first_layer_height = 0.2
+first_layer_speed = 20
+gap_fill_speed = 30
+gcode_comments = 0
+infill_every_layers = 1
+infill_extruder = 1
+infill_extrusion_width = 0.45
+infill_first = 0
+infill_only_where_needed = 0
+infill_overlap = 25%
+infill_speed = 50
+interface_shells = 0
+max_print_speed = 100
+max_volumetric_extrusion_rate_slope_negative = 0
+max_volumetric_extrusion_rate_slope_positive = 0
+max_volumetric_speed = 0
+min_skirt_length = 4
+notes = 
+overhangs = 0
+only_retract_when_crossing_perimeters = 0
+ooze_prevention = 0
+output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
+perimeters = 2
+perimeter_extruder = 1
+perimeter_extrusion_width = 0.45
+perimeter_speed = 40
+post_process = 
+print_settings_id = 
+raft_layers = 0
+resolution = 0
+seam_position = nearest
+single_extruder_multi_material_priming = 0
+skirts = 1
+skirt_distance = 2
+skirt_height = 2
+small_perimeter_speed = 25
+solid_infill_below_area = 0
+solid_infill_every_layers = 0
+solid_infill_extruder = 1
+solid_infill_extrusion_width = 0.45
+solid_infill_speed = 40
+spiral_vase = 0
+standby_temperature_delta = -5
+support_material = 0
+support_material_extruder = 0
+support_material_extrusion_width = 0.38
+support_material_interface_extruder = 0
+support_material_angle = 0
+support_material_buildplate_only = 0
+support_material_enforce_layers = 0
+support_material_contact_distance = 0.15
+support_material_interface_contact_loops = 0
+support_material_interface_layers = 2
+support_material_interface_spacing = 0.2
+support_material_interface_speed = 100%
+support_material_pattern = rectilinear
+support_material_spacing = 2
+support_material_speed = 40
+support_material_synchronize_layers = 0
+support_material_threshold = 45
+support_material_with_sheath = 0
+support_material_xy_spacing = 60%
+thin_walls = 0
+top_infill_extrusion_width = 0.4
+top_solid_infill_speed = 30
+travel_speed = 150
+wipe_tower = 0
+wipe_tower_bridging = 10
+wipe_tower_rotation_angle = 0
+wipe_tower_width = 60
+wipe_tower_x = 170
+wipe_tower_y = 140
+xy_size_compensation = 0
+
+[print:*0.08mm*]
+inherits = *common*
+layer_height = 0.08
+perimeters = 3
+bottom_solid_layers = 9
+top_solid_layers = 11
+
+[print:*0.10mm*]
+inherits = *common*
+layer_height = 0.1
+perimeters = 3
+bottom_solid_layers = 7
+top_solid_layers = 9
+
+[print:*0.12mm*]
+inherits = *common*
+layer_height = 0.12
+perimeters = 3
+bottom_solid_layers = 6
+top_solid_layers = 7
+
+[print:*0.16mm*]
+inherits = *common*
+layer_height = 0.16
+bottom_solid_layers = 5
+top_solid_layers = 7
+
+[print:*0.20mm*]
+inherits = *common*
+layer_height = 0.20
+bottom_solid_layers = 4
+top_solid_layers = 5
+
+[print:*0.24mm*]
+inherits = *common*
+layer_height = 0.24
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:*0.28mm*]
+inherits = *common*
+layer_height = 0.28
+top_infill_extrusion_width = 0.45
+bottom_solid_layers = 3
+top_solid_layers = 4
+
+[print:0.08mm SUPERDETAIL @ELEGOO]
+inherits = *0.08mm*
+compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
+
+[print:0.10mm HIGHDETAIL @ELEGOO]
+inherits = *0.10mm*
+compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
+
+[print:0.12mm DETAIL @ELEGOO]
+inherits = *0.12mm*
+compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
+
+[print:0.16mm OPTIMAL @ELEGOO]
+inherits = *0.16mm*
+compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
+
+[print:0.20mm NORMAL @ELEGOO]
+inherits = *0.20mm*
+compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
+
+[print:0.24mm DRAFT @ELEGOO]
+inherits = *0.24mm*
+compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
+
+[print:0.28mm SUPERDRAFT @ELEGOO]
+inherits = *0.28mm*
+compatible_printers_condition = printer_model=~/(NEPTUNE).*/ and nozzle_diameter[0]==0.4
+
+# When submitting new filaments please print the following temperature tower at 0.1mm layer height:
+#   https://www.thingiverse.com/thing:2615842
+# Pay particular attention to bridging, overhangs and retractions.
+# Also print the following bed adhesion test at 0.1 layer height as well:
+#   https://www.prusaprinters.org/prints/4634-bed-adhesion-warp-test
+# At least for PLA, please keep bed temp at 60, as many Elegoo printers do not have any ABL
+# So having some leeway to get good bed adhesion is not a luxury for many users
+
+[filament:*common*]
+cooling = 0
+compatible_printers = 
+extrusion_multiplier = 1
+filament_cost = 0
+filament_density = 0
+filament_diameter = 1.75
+filament_notes = ""
+filament_settings_id = ""
+filament_soluble = 0
+min_print_speed = 15
+slowdown_below_layer_time = 20
+compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_ELEGOO.*/
+
+[filament:*PLA*]
+inherits = *common*
+bed_temperature = 60
+fan_below_layer_time = 100
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 15
+filament_type = PLA
+filament_density = 1.24
+filament_cost = 20
+first_layer_bed_temperature = 60
+first_layer_temperature = 210
+fan_always_on = 1
+cooling = 1
+max_fan_speed = 100
+min_fan_speed = 100
+bridge_fan_speed = 100
+disable_fan_first_layers = 1
+temperature = 205
+
+[filament:*PET*]
+inherits = *common*
+bed_temperature = 70
+cooling = 1
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 8
+filament_type = PETG
+filament_density = 1.27
+filament_cost = 20
+first_layer_bed_temperature = 70
+first_layer_temperature = 240
+fan_always_on = 1
+max_fan_speed = 50
+min_fan_speed = 20
+bridge_fan_speed = 100
+temperature = 240
+
+[filament:*ABS*]
+inherits = *common*
+bed_temperature = 100
+cooling = 0
+disable_fan_first_layers = 3
+fan_below_layer_time = 20
+filament_colour = #DDDDDD
+filament_max_volumetric_speed = 11
+filament_type = ABS
+filament_density = 1.04
+filament_cost = 20
+first_layer_bed_temperature = 100
+first_layer_temperature = 245
+fan_always_on = 0
+max_fan_speed = 0
+min_fan_speed = 0
+bridge_fan_speed = 30
+top_fan_speed = 0
+temperature = 245
+
+[filament:Generic PLA @ELEGOO]
+inherits = *PLA*
+filament_vendor = Generic
+
+[filament:Generic PETG @ELEGOO]
+inherits = *PET*
+filament_vendor = Generic
+
+[filament:Generic ABS @ELEGOO]
+inherits = *ABS*
+first_layer_bed_temperature = 90
+bed_temperature = 90
+filament_vendor = Generic
+
+[filament:Eolas Prints PLA @ELEGOO]
+inherits = *PLA*
+filament_vendor = Eolas Prints
+filament_cost = 23.50
+filament_density = 1.24
+filament_spool_weight = 0
+filament_colour = #4D9398
+first_layer_bed_temperature = 65
+first_layer_temperature = 208
+temperature = 202
+
+[filament:Eolas Prints PLA Matte @ELEGOO]
+inherits = Eolas Prints PLA @ELEGOO
+filament_cost = 25.50
+filament_max_volumetric_speed = 14
+temperature = 210
+
+[filament:Eolas Prints INGEO 850 @ELEGOO]
+inherits = Eolas Prints PLA @ELEGOO
+filament_cost = 25.90
+temperature = 210
+
+[filament:Eolas Prints INGEO 870 @ELEGOO]
+inherits = Eolas Prints PLA @ELEGOO
+filament_cost = 25.90
+temperature = 215
+first_layer_bed_temperature = 68
+first_layer_temperature = 220
+bed_temperature = 65
+
+[filament:Eolas Prints PETG @ELEGOO]
+inherits = *PET*
+filament_vendor = Eolas Prints
+filament_cost = 29.90
+filament_density = 1.27
+filament_spool_weight = 0
+filament_colour = #4D9398
+temperature = 240
+first_layer_bed_temperature = 85
+first_layer_temperature = 235
+bed_temperature = 90
+
+[filament:Eolas Prints PETG - UV Resistant @ELEGOO]
+inherits = Eolas Prints PETG @ELEGOO
+filament_cost = 35.90
+temperature = 242
+first_layer_temperature = 237
+
+# Common printer preset
+[printer:*common*]
+printer_technology = FFF
+before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n
+bed_shape = 0x0,220x0,220x220,0x220
+between_objects_gcode = 
+pause_print_gcode = 
+deretract_speed = 0
+extruder_colour = #FCE94F
+extruder_offset = 0x0
+gcode_flavor = marlin
+silent_mode = 0
+remaining_times = 0
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
+max_layer_height = 0.3
+min_layer_height = 0.07
+max_print_height = 250
+nozzle_diameter = 0.4
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 1
+retract_length_toolchange = 1
+retract_lift = 0
+retract_lift_above = 0
+retract_lift_below = 0
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+single_extruder_multi_material = 0
+thumbnails = 16x16,220x124
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0
+printer_model = 
+default_print_profile = 0.16mm OPTIMAL @ELEGOO
+default_filament_profile = Generic PLA @ELEGOO
+
+[printer:Elegoo Neptune-2]
+inherits = *common*
+printer_model = NEPTUNE2
+printer_variant = 0.4
+max_layer_height = 0.28
+min_layer_height = 0.08
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2\nPRINTER_HAS_BOWDEN
+max_print_height = 250
+machine_max_acceleration_e = 5000
+machine_max_acceleration_extruding = 500
+machine_max_acceleration_retracting = 1000
+machine_max_acceleration_x = 500
+machine_max_acceleration_y = 500
+machine_max_acceleration_z = 100
+machine_max_feedrate_e = 60
+machine_max_feedrate_x = 500
+machine_max_feedrate_y = 500
+machine_max_feedrate_z = 10
+machine_max_jerk_e = 5
+machine_max_jerk_x = 8
+machine_max_jerk_y = 8
+machine_max_jerk_z = 0.4
+machine_min_extruding_rate = 0
+machine_min_travel_rate = 0
+nozzle_diameter = 0.4
+retract_before_travel = 2
+retract_length = 5
+retract_speed = 60
+deretract_speed = 40
+retract_before_wipe = 70%
+start_gcode = M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+
+# Intended for printers with dual extruders and a single hotend/nozzle
+[printer:*dualextruder*]
+single_extruder_multi_material = 1
+cooling_tube_length = 23
+cooling_tube_retraction = 35
+extra_loading_move = -2
+parking_pos_retraction = 80
+deretract_speed = 40,40
+extruder_colour = #0080C0;#FFFF9F
+extruder_offset = 0x0,0x0
+max_layer_height = 0.28,0.28
+min_layer_height = 0.08,0.08
+nozzle_diameter = 0.4,0.4
+retract_before_travel = 2,2
+retract_before_wipe = 70%,70%
+retract_layer_change = 1,1
+retract_length = 5,5
+retract_length_toolchange = 1,1
+retract_lift = 0,0
+retract_lift_above = 0,0
+retract_lift_below = 0,0
+retract_restart_extra = 0,0
+retract_restart_extra_toolchange = 0,0
+retract_speed = 60,60
+wipe = 1,1
+start_gcode = T[initial_tool] ; set active extruder\nM413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; auto bed levelling - remove ; at beginning of line to enable\n;M420 S1 ; enable mesh - remove ; at beginning of line to enable\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240 ; move down to prime nozzle\nG92 E0 ; reset extruder\nG1 E90 ; load filament\nG92 E0 ; reset extruder\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000 ; move over for second prime line\nG92 E0 ; reset extruder\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0 ; reset extruder
+end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\nG1 E-80 F2000 ; unload filament\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors
+
+# Copy of Creality CR-X config for the Neptune 2D (dual extruder, single hotend)
+
+[printer:Elegoo Neptune-2D]
+inherits = Elegoo Neptune-2; *dualextruder*
+retract_length = 6,6
+printer_model = NEPTUNE2D
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2D
+
+[printer:Elegoo Neptune-2S]
+inherits = Elegoo Neptune-2
+printer_model = NEPTUNE2S
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE2S
+
+[printer:Elegoo Neptune-X]
+inherits = Elegoo Neptune-2
+max_print_height = 300
+printer_model = NEPTUNEX
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNEX
+
+[printer:Elegoo Neptune-3]
+inherits = Elegoo Neptune-2
+max_print_height = 280
+start_gcode = M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[first_layer_bed_temperature] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\nM104 S[first_layer_temperature] ; set final nozzle temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp to stabilize\nM109 S[first_layer_temperature] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
+printer_model = NEPTUNE3
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3
+
+[printer:Elegoo Neptune-1]
+inherits = Elegoo Neptune-2
+bed_shape = 0x0,210x0,210x210,0x210
+max_print_height = 200
+printer_model = NEPTUNE1
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE1
+
+[printer:Elegoo Neptune-3 Max]
+inherits = Elegoo Neptune-3
+retract_length = 2.5
+retract_speed = 25
+bed_shape = 0x0,420x0,420x420,0x420
+max_print_height = 500
+printer_model = NEPTUNE3MAX
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3MAX
+
+[printer:Elegoo Neptune-3 Plus]
+inherits = Elegoo Neptune-3
+retract_length = 2.5
+retract_speed = 25
+bed_shape = 0x0,320x0,320x320,0x320
+max_print_height = 400
+printer_model = NEPTUNE3PLUS
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3PLUS
+
+[printer:Elegoo Neptune-3 Pro]
+inherits = Elegoo Neptune-3
+bed_shape = 0x0,225x0,225x225,0x225
+max_print_height = 280
+retract_length = 2.5
+retract_speed = 25
+printer_model = NEPTUNE3PRO
+printer_notes = Do not remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_ELEGOO\nPRINTER_MODEL_NEPTUNE3PRO
+

live/Elegoo/index.idx

@@ -1,4 +1,5 @@
 min_slic3r_version = 2.6.0-alpha1
+1.0.3 Added Eolas Prints filaments.
 1.0.2 Added new printer models.
 min_slic3r_version = 2.5.0-alpha3
 1.0.1 Decreased bed size to 220x220.