Add files via upload

Slic3r settings MK2/printer/Original Prusa i3 MK2 0.6 nozzle.ini

@@ -0,0 +1,38 @@
+# generated by Slic3r 1.36.2-prusa3d-win64 on Thu Aug  3 16:00:43 2017
+bed_shape = 0x0,250x0,250x210,0x210
+before_layer_gcode = 
+deretract_speed = 0
+end_gcode = G4 ; wait\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nG1 X0 Y200; home X axis\nM84 ; disable motors
+extruder_colour = #FFFF00
+extruder_offset = 0x0
+gcode_flavor = reprap
+layer_gcode = 
+max_layer_height = 0.25
+min_layer_height = 0.07
+nozzle_diameter = 0.6
+octoprint_apikey = 
+octoprint_host = 
+printer_notes = 
+printer_settings_id = 
+retract_before_travel = 1
+retract_before_wipe = 0%
+retract_layer_change = 1
+retract_length = 0.8
+retract_length_toolchange = 3
+retract_lift = 0.5
+retract_lift_above = 1
+retract_lift_below = 199
+retract_restart_extra = 0
+retract_restart_extra_toolchange = 0
+retract_speed = 35
+serial_port = 
+serial_speed = 250000
+single_extruder_multi_material = 0
+start_gcode = M115 U3.0.12 ; tell printer latest fw version\nM83  ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG28 W ; home all without mesh bed level\nG80 ; mesh bed leveling\nG1 Y-3.0 F1000.0 ; go outside pritn area\nG1 X60.0 E9.0  F1000.0 ; intro line\nG1 X100.0 E12.5  F1000.0 ; intro line
+toolchange_gcode = 
+use_firmware_retraction = 0
+use_relative_e_distances = 1
+use_volumetric_e = 0
+variable_layer_height = 1
+wipe = 1
+z_offset = 0