Removed the config bundles, moved one level up

config_bundles/175mm.ini

@@ -1,836 +0,0 @@
-# generated by Slic3r 1.2.9 on Sat Oct 31 14:35:13 2015
-
-[filament:ColorFabb Brass Bronze  1.75mm]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #B79A39
-filament_diameter = 1.75
-first_layer_bed_temperature = 50
-first_layer_temperature = 210
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 5
-slowdown_below_layer_time = 20
-temperature = 210
-
-[filament:ColorFabb Wood Bamboo 1.75mm]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #5A4110
-filament_diameter = 1.75
-first_layer_bed_temperature = 50
-first_layer_temperature = 210
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 5
-slowdown_below_layer_time = 20
-temperature = 210
-
-[filament:ColorFabb XT 1.75mm]
-bed_temperature = 65
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 3
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #A36FFD
-filament_diameter = 1.75
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 240
-
-[filament:ColorFabb XT-CF20 1.75mm]
-bed_temperature = 65
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 3
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #000000
-filament_diameter = 1.75
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 250
-
-[filament:Fillamentum ABS 1.75mm]
-bed_temperature = 100
-bridge_fan_speed = 30
-cooling = 0
-disable_fan_first_layers = 3
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_diameter = 1.75
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 255
-
-[filament:Prusa ABS 1.75mm]
-bed_temperature = 100
-bridge_fan_speed = 30
-cooling = 0
-disable_fan_first_layers = 3
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #3A80CA
-filament_diameter = 1.75
-first_layer_bed_temperature = 100
-first_layer_temperature = 255
-max_fan_speed = 30
-min_fan_speed = 10
-min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 255
-
-[filament:Prusa FLEX 1.75mm]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 0
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #00CA0A
-filament_diameter = 1.75
-first_layer_bed_temperature = 50
-first_layer_temperature = 230
-max_fan_speed = 90
-min_fan_speed = 70
-min_print_speed = 5
-slowdown_below_layer_time = 10
-temperature = 230
-
-[filament:Prusa HIPS 1.75mm]
-bed_temperature = 100
-bridge_fan_speed = 80
-cooling = 1
-disable_fan_first_layers = 3
-extrusion_multiplier = 0.9
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #FFE130
-filament_diameter = 1.75
-first_layer_bed_temperature = 100
-first_layer_temperature = 220
-max_fan_speed = 80
-min_fan_speed = 50
-min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 220
-
-[filament:Prusa PET 1.75mm]
-bed_temperature = 90
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 3
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 20
-filament_colour = #B5F5FD
-filament_diameter = 1.75
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 50
-min_fan_speed = 30
-min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 240
-
-[filament:Prusa PLA 1.75mm]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 1
-extrusion_multiplier = 1
-fan_always_on = 1
-fan_below_layer_time = 100
-filament_colour = #FF14E2
-filament_diameter = 1.75
-first_layer_bed_temperature = 50
-first_layer_temperature = 210
-max_fan_speed = 100
-min_fan_speed = 85
-min_print_speed = 5
-slowdown_below_layer_time = 20
-temperature = 210
-
-[filament:Taulman Bridge 1.75mm]
-bed_temperature = 50
-bridge_fan_speed = 40
-cooling = 0
-disable_fan_first_layers = 3
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #DEE0E6
-filament_diameter = 1.75
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 250
-
-[filament:Taulman T-Glase 1.75mm]
-bed_temperature = 79
-bridge_fan_speed = 40
-cooling = 0
-disable_fan_first_layers = 3
-extrusion_multiplier = 1
-fan_always_on = 0
-fan_below_layer_time = 20
-filament_colour = #FD0200
-filament_diameter = 1.75
-first_layer_bed_temperature = 90
-first_layer_temperature = 240
-max_fan_speed = 5
-min_fan_speed = 0
-min_print_speed = 5
-slowdown_below_layer_time = 15
-temperature = 240
-
-[presets]
-filament = Prusa PLA 1.75mm.ini
-print = 0.20mm NORMAL.ini
-printer = Prusa i3 1.75.ini
-
-[print:0.05mm PLA ULTRADETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 8
-bridge_acceleration = 0
-bridge_flow_ratio = 0.1
-bridge_speed = 20
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.3
-fill_angle = 45
-fill_density = 15%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.45
-first_layer_height = 0.2
-first_layer_speed = 80%
-gap_fill_speed = 0
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.5
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 4%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.05
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 40
-perimeters = 4
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = random
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 50
-support_material_threshold = 0
-thin_walls = 0
-threads = 1
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 10
-travel_speed = 200
-xy_size_compensation = 0
-
-[print:0.10mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 8
-bridge_acceleration = 0
-bridge_flow_ratio = 0.1
-bridge_speed = 25
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.3
-fill_angle = 45
-fill_density = 15%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.15
-first_layer_speed = 80%
-gap_fill_speed = 0
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.5
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 2%
-infill_speed = 60
-interface_shells = 0
-layer_height = 0.1
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 40
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.3
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 50
-support_material_threshold = 0
-thin_walls = 0
-threads = 1
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 25
-top_solid_layers = 9
-travel_speed = 100
-xy_size_compensation = 0
-
-[print:0.20mm FLEX]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 0
-bridge_flow_ratio = 0.65
-bridge_speed = 15
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 15
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 22%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.2
-first_layer_speed = 100%
-gap_fill_speed = 15
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 0.25
-infill_speed = 15
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 15
-perimeters = 2
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 15
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 15
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.05
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 15
-support_material_threshold = 40
-thin_walls = 0
-threads = 1
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 15
-top_solid_layers = 6
-travel_speed = 100
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_flow_ratio = 0.65
-bridge_speed = 15
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0.45
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 22%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0.45
-first_layer_height = 0.2
-first_layer_speed = 70%
-gap_fill_speed = 40
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0.45
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 0
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 50
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0.45
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 40
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0.45
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.05
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.35
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_threshold = 40
-thin_walls = 0
-threads = 1
-top_infill_extrusion_width = 0.45
-top_solid_infill_speed = 20
-top_solid_layers = 3
-travel_speed = 100
-xy_size_compensation = 0
-
-[print:0.25mm DRAFT]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 4
-bridge_acceleration = 0
-bridge_flow_ratio = 0.65
-bridge_speed = 15
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.65
-fill_angle = 45
-fill_density = 22%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.25
-first_layer_speed = 50%
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 0.1
-infill_speed = 55
-interface_shells = 0
-layer_height = 0.25
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-raft_layers = 0
-resolution = 0
-seam_position = nearest
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 40
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.1
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.6
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1
-support_material_speed = 50
-support_material_threshold = 43
-thin_walls = 0
-threads = 1
-top_infill_extrusion_width = 0.75
-top_solid_infill_speed = 20
-top_solid_layers = 5
-travel_speed = 100
-xy_size_compensation = 0
-
-[printer:Prusa i3 1.75]
-bed_shape = 200.01x-0.00091,200.012x0.005409,200.01x0.006186,200.01x199.994,200.012x199.995,200.01x200.001,200.011x200.017,200.01x200.016,199.998x200.01,199.991x200.01,199.99x200.01,189.99x200.01,189.99x195.01,170.01x195.01,170.01x199.99,170.01x199.99,170.01x200,170.01x200.01,170x200.01,29.99x200.01,29.99x195.01,10.01x195.01,10.01x200.01,0.009509x200.01,0.009496x200.01,0.002241x200.01,-0.010875x200.017,-0.010069x200.001,-0.011561x199.995,-0.01001x199.994,-0.01001x0.006186,-0.011561x0.005409,-0.010069x-0.00091,-0.010875x-0.016628,0.002241x-0.01007,0.009496x-0.010256,0.009509x-0.01001,10.01x-0.01001,10.01x4.98999,29.99x4.98999,29.99x-0.01001,170x-0.01001,170.01x-0.010373,170.01x-8.9e-05,170.01x0.009652,170.01x0.009658,170.01x4.98999,189.99x4.98999,189.99x-0.01001,199.99x-0.01001,199.991x-0.010256,199.998x-0.01007,200.01x-0.016188,200.011x-0.016628
-before_layer_gcode = 
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = 
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-pressure_advance = 0.035
-retract_before_travel = 1
-retract_layer_change = 1
-retract_length = 1.5
-retract_length_toolchange = 3
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-start_gcode = M201 X1000 Y1000 E600\nM109 S[first_layer_temperature]\nM92 E161.3\nG28\nG92 E0.0\nG1 X8.0 F2000\nG1 Y60.0 E4.0  F1000.0\nG1 Y100.0 E8.5  F1000.0\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0
-
-[printer:Prusa i3 1.75 FLEX]
-bed_shape = 200.01x-0.00091,200.012x0.005409,200.01x0.006186,200.01x199.994,200.012x199.995,200.01x200.001,200.011x200.017,200.01x200.016,199.998x200.01,199.991x200.01,199.99x200.01,189.99x200.01,189.99x195.01,170.01x195.01,170.01x199.99,170.01x199.99,170.01x200,170.01x200.01,170x200.01,29.99x200.01,29.99x195.01,10.01x195.01,10.01x200.01,0.009509x200.01,0.009496x200.01,0.002241x200.01,-0.010875x200.017,-0.010069x200.001,-0.011561x199.995,-0.01001x199.994,-0.01001x0.006186,-0.011561x0.005409,-0.010069x-0.00091,-0.010875x-0.016628,0.002241x-0.01007,0.009496x-0.010256,0.009509x-0.01001,10.01x-0.01001,10.01x4.98999,29.99x4.98999,29.99x-0.01001,170x-0.01001,170.01x-0.010373,170.01x-8.9e-05,170.01x0.009652,170.01x0.009658,170.01x4.98999,189.99x4.98999,189.99x-0.01001,199.99x-0.01001,199.991x-0.010256,199.998x-0.01007,200.01x-0.016188,200.011x-0.016628
-before_layer_gcode = 
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = 
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-pressure_advance = 0.035
-retract_before_travel = 1
-retract_layer_change = 1
-retract_length = 1.5
-retract_length_toolchange = 3
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-start_gcode = M201 X1000 Y1000 E80\nM109 S[first_layer_temperature]\nM92 E161.3\nG28\nG92 E0.0\nG1 X8.0 F2000\nG1 Y60.0 E4.0  F1000.0\nG1 Y100.0 E8.5  F1000.0\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0
-
-[settings]
-autocenter = 1
-mode = expert
-
-[simple]
-avoid_crossing_perimeters = 1
-bed_shape = 0x0,200x0,200x200,0x200
-bed_temperature = 0
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-complete_objects = 0
-cooling = 1
-default_acceleration = 0
-disable_fan_first_layers = 1
-dont_support_bridges = 1
-duplicate_distance = 6
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
-external_fill_pattern = rectilinear
-external_perimeter_speed = 70%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extruder_offset = 0x0
-extrusion_axis = E
-extrusion_multiplier = 1
-extrusion_width = 0
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_diameter = 2.95
-fill_angle = 45
-fill_density = 30%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_bed_temperature = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.4
-first_layer_speed = 30%
-first_layer_temperature = 0
-gap_fill_speed = 20
-gcode_arcs = 0
-gcode_comments = 0
-gcode_flavor = reprap
-infill_acceleration = 0
-infill_every_layers = 10
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_speed = 60
-interface_shells = 0
-layer_gcode = 
-layer_height = 0.3
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-min_skirt_length = 0
-notes = 
-nozzle_diameter = 0.4
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-retract_before_travel = 2
-retract_layer_change = 1
-retract_length = 0.6
-retract_length_toolchange = 10
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-seam_position = aligned
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slowdown_below_layer_time = 30
-small_perimeter_speed = 30
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extrusion_width = 0
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0  F1000.0\nG1 Y100.0 E2.3  F1000.0\nG92 Z[layer_height]\nG92 E0.0
-support_material = 0
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = pillars
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_threshold = 0
-temperature = 0
-thin_walls = 1
-threads = 2
-toolchange_gcode = 
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 50
-top_solid_layers = 3
-travel_speed = 100
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0

config_bundles/3mm.ini

@@ -1,623 +0,0 @@
-# generated by Slic3r 1.2.9 on Wed Sep 23 14:17:59 2015
-
-[filament:Prusa ABS 2.85mm]
-bed_temperature = 100
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 0
-extrusion_multiplier = 0.98
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #3A80CA
-filament_diameter = 2.9
-first_layer_bed_temperature = 0
-first_layer_temperature = 0
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 10
-temperature = 285
-
-[filament:Prusa HIPS 2.85mm]
-bed_temperature = 100
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 0
-extrusion_multiplier = 0.98
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #1CCA00
-filament_diameter = 2.9
-first_layer_bed_temperature = 0
-first_layer_temperature = 0
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 10
-temperature = 285
-
-[filament:Prusa PET 2.85mm]
-bed_temperature = 100
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 0
-extrusion_multiplier = 0.98
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #BCBECA
-filament_diameter = 2.9
-first_layer_bed_temperature = 0
-first_layer_temperature = 0
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 10
-temperature = 285
-
-[filament:Prusa PLA 2.85mm]
-bed_temperature = 50
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 0
-extrusion_multiplier = 0.98
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #CA2630
-filament_diameter = 2.9
-first_layer_bed_temperature = 0
-first_layer_temperature = 0
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 10
-temperature = 215
-
-[filament:Prusa PP Flex 2.85mm]
-bed_temperature = 100
-bridge_fan_speed = 100
-cooling = 1
-disable_fan_first_layers = 0
-extrusion_multiplier = 0.98
-fan_always_on = 0
-fan_below_layer_time = 100
-filament_colour = #9A40CA
-filament_diameter = 2.9
-first_layer_bed_temperature = 0
-first_layer_temperature = 0
-max_fan_speed = 100
-min_fan_speed = 100
-min_print_speed = 5
-slowdown_below_layer_time = 10
-temperature = 285
-
-[presets]
-filament = Prusa ABS 2.85mm.ini
-print = 0.20mm NORMAL.ini
-printer = Prusa i3.ini
-
-[print:0.15mm DETAIL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 0
-bridge_flow_ratio = 0.65
-bridge_speed = 15
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 40
-external_perimeters_first = 1
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.45
-fill_angle = 45
-fill_density = 22%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.15
-first_layer_speed = 80%
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 0.02
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.15
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-raft_layers = 0
-resolution = 0.02
-seam_position = random
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 40
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.5
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 50
-support_material_threshold = 0
-thin_walls = 1
-threads = 1
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 8
-travel_speed = 100
-xy_size_compensation = 0
-
-[print:0.20mm NORMAL]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 0
-bridge_flow_ratio = 0.65
-bridge_speed = 15
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 40
-external_perimeters_first = 0
-extra_perimeters = 0
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.55
-fill_angle = 45
-fill_density = 22%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.25
-first_layer_speed = 80%
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 2%
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 0
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-raft_layers = 0
-resolution = 0.02
-seam_position = random
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 40
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.5
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 50
-support_material_threshold = 45
-thin_walls = 0
-threads = 1
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 6
-travel_speed = 100
-xy_size_compensation = 0
-
-[print:0.28mm FAST]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 0
-bridge_flow_ratio = 0.65
-bridge_speed = 15
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 40
-external_perimeters_first = 1
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.6
-fill_angle = 45
-fill_density = 22%
-fill_pattern = honeycomb
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.2
-first_layer_speed = 80%
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 0.02
-infill_speed = 40
-interface_shells = 0
-layer_height = 0.28
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 40
-perimeters = 2
-post_process = 
-raft_layers = 0
-resolution = 0.02
-seam_position = random
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 40
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 40
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.5
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 50
-support_material_threshold = 0
-thin_walls = 1
-threads = 1
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 4
-travel_speed = 100
-xy_size_compensation = 0
-
-[print:Flex]
-avoid_crossing_perimeters = 0
-bottom_solid_layers = 5
-bridge_acceleration = 0
-bridge_flow_ratio = 0.65
-bridge_speed = 15
-brim_width = 0
-complete_objects = 0
-default_acceleration = 0
-dont_support_bridges = 1
-external_fill_pattern = rectilinear
-external_perimeter_extrusion_width = 0
-external_perimeter_speed = 20
-external_perimeters_first = 1
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extrusion_width = 0.6
-fill_angle = 45
-fill_density = 90%
-fill_pattern = line
-first_layer_acceleration = 0
-first_layer_extrusion_width = 0
-first_layer_height = 0.2
-first_layer_speed = 80%
-gap_fill_speed = 20
-gcode_comments = 0
-infill_acceleration = 0
-infill_every_layers = 1
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_overlap = 0.1
-infill_speed = 20
-interface_shells = 0
-layer_height = 0.2
-max_print_speed = 80
-max_volumetric_speed = 0
-min_skirt_length = 4
-notes = 
-only_retract_when_crossing_perimeters = 0
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 20
-perimeters = 2
-post_process = 
-raft_layers = 0
-resolution = 0.02
-seam_position = random
-skirt_distance = 2
-skirt_height = 1
-skirts = 1
-small_perimeter_speed = 20
-solid_infill_below_area = 0
-solid_infill_every_layers = 0
-solid_infill_extruder = 1
-solid_infill_extrusion_width = 0
-solid_infill_speed = 20
-spiral_vase = 0
-standby_temperature_delta = -5
-support_material = 0
-support_material_angle = 0
-support_material_contact_distance = 0.2
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0.5
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = rectilinear
-support_material_spacing = 1.5
-support_material_speed = 20
-support_material_threshold = 0
-thin_walls = 1
-threads = 1
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 20
-top_solid_layers = 4
-travel_speed = 100
-xy_size_compensation = 0
-
-[printer:Prusa i3]
-bed_shape = 0x3,200x3,200x203,0x203
-before_layer_gcode = 
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = 
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-pressure_advance = 0
-retract_before_travel = 1
-retract_layer_change = 1
-retract_length = 2.5
-retract_length_toolchange = 3
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 20
-start_gcode = M201 X750 Y750 E100\nG28 X0.0 Y0.0\nG28 Z\nG92 E0.0\nG1 X5.0 Y60.0 E2.0  F1000.0\nG1 X5.0 Y100.0 E4.5  F1000.0\nG92 Z0.35\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-vibration_limit = 0
-wipe = 1
-z_offset = 0
-
-[printer:Prusa i3 Flex]
-bed_shape = 0x3,200x3,200x203,0x203
-before_layer_gcode = 
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
-extruder_offset = 0x0
-gcode_flavor = reprap
-layer_gcode = 
-nozzle_diameter = 0.4
-octoprint_apikey = 
-octoprint_host = 
-pressure_advance = 0
-retract_before_travel = 1
-retract_layer_change = 1
-retract_length = 0
-retract_length_toolchange = 3
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 20
-start_gcode = M201 X750 Y750 E100\nG28 X0.0 Y0.0\nG28 Z\nG92 E0.0\nG1 X5.0 Y60.0 E2.0  F1000.0\nG1 X5.0 Y100.0 E4.5  F1000.0\nG92 Z0.35\nG92 E0.0
-toolchange_gcode = 
-use_firmware_retraction = 0
-use_relative_e_distances = 1
-use_volumetric_e = 0
-vibration_limit = 0
-wipe = 1
-z_offset = 0
-
-[settings]
-autocenter = 1
-mode = expert
-
-[simple]
-avoid_crossing_perimeters = 1
-bed_shape = 0x0,200x0,200x200,0x200
-bed_temperature = 0
-bottom_solid_layers = 3
-bridge_acceleration = 0
-bridge_fan_speed = 100
-bridge_flow_ratio = 1
-bridge_speed = 60
-brim_width = 0
-complete_objects = 0
-cooling = 1
-default_acceleration = 0
-disable_fan_first_layers = 1
-dont_support_bridges = 1
-duplicate_distance = 6
-end_gcode = M104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nG28 X0  ; home X axis\nM84     ; disable motors
-external_fill_pattern = rectilinear
-external_perimeter_speed = 70%
-external_perimeters_first = 0
-extra_perimeters = 1
-extruder_clearance_height = 20
-extruder_clearance_radius = 20
-extruder_offset = 0x0
-extrusion_axis = E
-extrusion_multiplier = 1
-extrusion_width = 0
-fan_always_on = 0
-fan_below_layer_time = 60
-filament_diameter = 2.95
-fill_angle = 45
-fill_density = 30%
-fill_pattern = rectilinear
-first_layer_acceleration = 0
-first_layer_bed_temperature = 0
-first_layer_extrusion_width = 200%
-first_layer_height = 0.4
-first_layer_speed = 30%
-first_layer_temperature = 0
-gap_fill_speed = 20
-gcode_arcs = 0
-gcode_comments = 0
-gcode_flavor = reprap
-infill_acceleration = 0
-infill_every_layers = 10
-infill_extruder = 1
-infill_extrusion_width = 0
-infill_first = 0
-infill_only_where_needed = 0
-infill_speed = 60
-interface_shells = 0
-layer_gcode = 
-layer_height = 0.3
-max_fan_speed = 100
-min_fan_speed = 35
-min_print_speed = 10
-min_skirt_length = 0
-notes = 
-nozzle_diameter = 0.4
-only_retract_when_crossing_perimeters = 1
-ooze_prevention = 0
-output_filename_format = [input_filename_base].gcode
-overhangs = 1
-perimeter_acceleration = 0
-perimeter_extruder = 1
-perimeter_extrusion_width = 0
-perimeter_speed = 30
-perimeters = 3
-post_process = 
-raft_layers = 0
-resolution = 0
-retract_before_travel = 2
-retract_layer_change = 1
-retract_length = 0.6
-retract_length_toolchange = 10
-retract_lift = 0
-retract_restart_extra = 0
-retract_restart_extra_toolchange = 0
-retract_speed = 30
-seam_position = aligned
-skirt_distance = 6
-skirt_height = 1
-skirts = 1
-slowdown_below_layer_time = 30
-small_perimeter_speed = 30
-solid_infill_below_area = 70
-solid_infill_every_layers = 0
-solid_infill_extrusion_width = 0
-solid_infill_speed = 60
-spiral_vase = 0
-standby_temperature_delta = -5
-start_gcode = G28 ; home all axes\nG92 E0.0\nG1 Y75.0 E2.0  F1000.0\nG1 Y100.0 E2.3  F1000.0\nG92 Z[layer_height]\nG92 E0.0
-support_material = 0
-support_material_angle = 0
-support_material_enforce_layers = 0
-support_material_extruder = 1
-support_material_extrusion_width = 0
-support_material_interface_extruder = 1
-support_material_interface_layers = 3
-support_material_interface_spacing = 0
-support_material_interface_speed = 100%
-support_material_pattern = pillars
-support_material_spacing = 2.5
-support_material_speed = 60
-support_material_threshold = 0
-temperature = 0
-thin_walls = 1
-threads = 2
-toolchange_gcode = 
-top_infill_extrusion_width = 0
-top_solid_infill_speed = 50
-top_solid_layers = 3
-travel_speed = 100
-use_firmware_retraction = 0
-use_relative_e_distances = 0
-vibration_limit = 0
-wipe = 0
-z_offset = 0