add some more integration howtos

README.md

@@ -5,7 +5,7 @@
 This repository contains custom firmwares for the following devices:
 
 Name | Picture
---- | --- 
+--- | ---
 Xiaomi Dafang | ![Dafang](/dafang.png)
 Xiaomi Xiaofang T20 | ![Xiaofang](/xiaofang.png)
 Wyzecam V2 | ![Xiaofang](/xiaofang.png)
@@ -36,7 +36,9 @@ Start [here](/hacks/technical.md)
 After install, you can use this [android application](https://play.google.com/apps/testing/io.ext.medinvention.dafangcam) developed by [@medinvention](https://github.com/mmohamed) and available at [GitLab](https://gitlab.com/mmohamed/DafangCam)
 
 ## Integration in Home Automation Systems:
+[Domoticz](/integration/domoticz/domoticz.md)
 [Home Assistant](/integration/homeassistant/homeassistant.md)
+[Zoneminder](/integration/zoneminder/zoneminder.md)
 
 ## Contributions:
 Any contribution to the development is highly welcome. The best possibility is to open a pull request on GitHub.

integration/domoticz/domoticz.md

@@ -0,0 +1,12 @@
+## Xiaomi Dafang Integration in Domoticz
+
+To control the camera in Domoticz one can create four virtual switches with a script action as on command.
+Set a off delay at 1 sec
+And as http:// script:
+
+http://[ip_of_camera]/cgi-bin/action.cgi?cmd=motor_right
+http://[ip_of_camera]/cgi-bin/action.cgi?cmd=motor_left
+http://[ip_of_camera]/cgi-bin/action.cgi?cmd=motor_top
+http://[ip_of_camera]/cgi-bin/action.cgi?cmd=motor_bottom
+
+For more information please see the [original source](https://gadget-freakz.com/2018/03/xiaomi-1080p-xiaofang-camera-review/).

integration/homeassistant/homeassistant.md

@@ -1,9 +1,5 @@
 ## Xiaomi Dafang Integration in Home Assistant
 
-
-
-
-
 ### On the Home Assistant side
 
 First let's set up your camera stream. Make sure the rtsp-h264 service in the [service control panel](http://dafang/cgi-bin/scripts.cgi) is running and you can connect to [it](rtsp://dafang:8554/unicast) via e.g. vlc player.

integration/zoneminder/zoneminder.md

@@ -0,0 +1,60 @@
+## Xiaomi Dafang Integration in Zoneminder
+
+ZM Setup:
+
+Click "Add a Monitor"
+### General Tab
+
+Name your camera
+Select Source Type of "FFmpeg"
+Function (this depends on you, I picked modect)
+Left all other settings as-is on this tab
+![pic](https://www.dropbox.com/s/j7j6andnl8s62jz/Screenshot%202018-04-30%2011.50.15.png?dl=1)
+
+### Source Tab
+
+Source Path: rtsp://XX.XX.XX.XX:8554/unicast (Where XX.XX.XX.XX is the IP of your camera)
+Remote Method: UDP (This was the first I tired and it worked, not saying it's the only way.
+Target colorspace: 32 bit colour
+Capture Width: 1920
+Capture Height: 1080
+The rest as-is ![pic](https://www.dropbox.com/s/4ds8vfb1xohzpd1/Screenshot%202018-04-30%2011.52.42.png?dl=1)
+BEFORE you can configure the Control tab
+
+If you don't see this make sure you enabled OPT_CONTROL in the ZM options
+Copy the gist into a file named Xiaomi.pm in /usr/share/perl5/ZoneMinder/Control/ (May be different for your distro, make sure it has the same permissions as the other controls)
+Navigate to the control tab for your camera
+Click on the "Edit" next to "Control Type"
+Click "Add New Control" at the bottom of the popup
+Name: "Xiaomi Dafang"
+Type: "Fffmpeg"
+Protocol: "Xiaomi" (it has to match the .pm file from above)
+Can Reset: Yes
+Pic: ![pic](https://www.dropbox.com/s/mm0aquc8s9zpul4/Screenshot%202018-04-30%2011.58.31.png?dl=1)
+
+### Move Tab
+
+Can move: yes
+Can move relative: yes
+
+Pic: ![pic](https://www.dropbox.com/s/br17kax291ld2vk/Screenshot%202018-04-30%2011.59.42.png?dl=1)
+
+### Pan Tab
+
+Can pan: yes
+ ![pic](https://www.dropbox.com/s/912cznq42khwkkp/Screenshot%202018-04-30%2012.00.13.png?dl=1)
+
+### Tilt Tab
+
+Can tilt: yes
+ ![pic](https://www.dropbox.com/s/dafhvnsbv2v6bvr/Screenshot%202018-04-30%2012.00.44.png?dl=1)
+
+That's it, now save your new control type and head back to the control tab
+
+### Control Tab
+
+Select "Controllable"
+Control Type "Xiaomi Dafang"
+Control Device: leave this empty
+Control Address: root:ismart12@XX.XX.XX.XX (Where XX.XX.XX.XX is the IP of your camera)
+![pic](https://www.dropbox.com/s/gd2vrd8cj7d1cbj/Screenshot%202018-04-30%2012.02.19.png?dl=1)