openscad/Mendel90
1
0
Fork 0
mirror of https://github.com/nophead/Mendel90.git synced 2025-01-16 20:38:15 +01:00
Code Issues Releases Wiki Activity

Various design improvements:

Browse Source 
The X ends now have much stronger bar clamps and the nut traps are moved to the top for less lead screw wobble.

X motor bracket now has two screws in the front of the motor and one at the back allowing it to be much smaller.

The Z couplings now use neoprene tubing instead of PVC and close completely.

The tube end caps are now nut traps to allow the tube to just have a single hole.
The rear fixing blocks now have the central screw going the other way so have onyl two nut traps.

The extruder springs now have washers to increase the default tension.

The spool holder now has the washers on the outside of the spool.

The carriage fan bracket has been strengthened.

The fan duct now has a hole to cool the top of the hot end.

Small printed parts now aggregated onto one build plate.

Hole in the Wade's big gear increased slightly.

The heat shield is now 5 layers of cardboard instead of foil and an air gap.

Bom generation and exploded view mode can now be enabled on the command line.

The assembly diagrams for the manual are now built from the command line.

Some mods for the Huxley version but still broken.

Fixed the long ATX bracket holes ending coincident with the face.

Can now have non square print beds.

Cap screws now shown silver instead of black as now all BZP.

Now shows the motor wire position.

% operator no longer used for transparency as OpenScad behaviour has changed.

Now includes the Skeinforge and Pronteface configurations on the SD card of priovided in the kit.
This commit is contained in:
Chris Palmer 2013-09-25 01:28:24 +01:00
parent 9345a5b85a
commit 4849e642e2
488 changed files with 564970 additions and 587239 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

29
Settings/.pronsolerc Normal file
View File

@ -0,0 +1,29 @@
macro HOME
G28
G1X0Y0F12000
macro BL
G1 X90 Y-95 F12000
M84
macro BR
G1 X-90 Y-95 F12000
G84
set xy_feedrate 50000
set z_feedrate 240
set e_feedrate 60
button 0 "HOME" /c "green" HOME
button 1 "BL" /c "blue" BL
button 2 "BM" /c "blue" G1X0Y-95
button 3 "BR" /c "blue" BR
button 4 "FL" /c "blue" G1 X90 Y90 F12000
button 5 "FM" /c "blue" G1 X0 Y90 F12000
button 6 "FR" /c "blue" G1 X-90 Y90 F12000
button 7 "ORIGIN" /c "green" G1X0Y0Z0
button 8 "FOFF" /c "yellow" M107
button 9 "FON" /c "red" M106
set last_file_path R:\Melzi
set build_dimensions 200x200x100-100-100+0
set port /dev/ttyUSB0
set baudrate 115200
set temperature_abs 240
set temperature_pla 220
set bedtemp_abs 130

41
Settings/.skeinforge/profiles/behold.csv Normal file
View File

@ -0,0 +1,41 @@
Format is tab separated behold settings.
Name Value
WindowPosition 0+0
WindowVisibilities
Open File for Behold H:/CHRIS/Projects/RepRaptor/Mendel/brackets1_export.gcode
Activate Behold False
Frame List
Animation Line Quickening (ratio): 1.0
Animation Slide Show Rate (layers/second): 2.0
Axis Rulings True
Band Height (layers): 5
Bottom Band Brightness (ratio): 0.7
Bottom Layer Brightness (ratio): 1.0
From the Bottom False
From the Top True
Draw Arrows False
Go Around Extruder Off Travel True
Layer (index): 0
Layer Extra Span (integer): 912345678
Line (index): 8
Display Line True
View Move False
View Rotate False
Number of Fill Bottom Layers (integer): 1
Number of Fill Top Layers (integer): 1
Scale (pixels per millimeter): 2.5
Screen Horizontal Inset (pixels): 96
Screen Vertical Inset (pixels): 199
Viewpoint Latitude (degrees): 28.5
Viewpoint Longitude (degrees): 58.1
Width of Axis Negative Side (pixels): 2
Width of Axis Positive Side (pixels): 6
Width of Fill Bottom Thread (pixels): 2
Width of Fill Top Thread (pixels): 2
Width of Infill Thread (pixels): 1
Width of Loop Thread (pixels): 2
Width of Perimeter Inside Thread (pixels): 8
Width of Perimeter Outside Thread (pixels): 8
Width of Raft Thread (pixels): 1
Width of Selection Thread (pixels): 6
Width of Travel Thread (pixels): 0
1 Format is tab separated behold settings.
2 Name Value
3 WindowPosition 0+0
4 WindowVisibilities
5 Open File for Behold H:/CHRIS/Projects/RepRaptor/Mendel/brackets1_export.gcode
6 Activate Behold False
7 Frame List
8 Animation Line Quickening (ratio): 1.0
9 Animation Slide Show Rate (layers/second): 2.0
10 Axis Rulings True
11 Band Height (layers): 5
12 Bottom Band Brightness (ratio): 0.7
13 Bottom Layer Brightness (ratio): 1.0
14 From the Bottom False
15 From the Top True
16 Draw Arrows False
17 Go Around Extruder Off Travel True
18 Layer (index): 0
19 Layer Extra Span (integer): 912345678
20 Line (index): 8
21 Display Line True
22 View Move False
23 View Rotate False
24 Number of Fill Bottom Layers (integer): 1
25 Number of Fill Top Layers (integer): 1
26 Scale (pixels per millimeter): 2.5
27 Screen Horizontal Inset (pixels): 96
28 Screen Vertical Inset (pixels): 199
29 Viewpoint Latitude (degrees): 28.5
30 Viewpoint Longitude (degrees): 58.1
31 Width of Axis Negative Side (pixels): 2
32 Width of Axis Positive Side (pixels): 6
33 Width of Fill Bottom Thread (pixels): 2
34 Width of Fill Top Thread (pixels): 2
35 Width of Infill Thread (pixels): 1
36 Width of Loop Thread (pixels): 2
37 Width of Perimeter Inside Thread (pixels): 8
38 Width of Perimeter Outside Thread (pixels): 8
39 Width of Raft Thread (pixels): 1
40 Width of Selection Thread (pixels): 6
41 Width of Travel Thread (pixels): 0

6
Settings/.skeinforge/profiles/comment.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated comment settings.
Name Value
WindowPosition 0+0
WindowVisibilities
Activate Comment False
Open File to Write Comments for
1 Format is tab separated comment settings.
2 Name Value
3 WindowPosition 0+0
4 WindowVisibilities
5 Activate Comment False
6 Open File to Write Comments for

5
Settings/.skeinforge/profiles/cutting.csv Normal file
View File

@ -0,0 +1,5 @@
Format is tab separated cutting settings.
Name Value
WindowPosition 0+400
WindowVisibilities
Profile Selection: end_mill
1 Format is tab separated cutting settings.
2 Name Value
3 WindowPosition 0+400
4 WindowVisibilities
5 Profile Selection: end_mill

5
Settings/.skeinforge/profiles/description.csv Normal file
View File

@ -0,0 +1,5 @@
Format is tab separated description settings.
Name Value
WindowPosition 0+0
WindowVisibilities
Description Text: Write your description of the profile here.___replaced___newline___replaced___newlineSuggested format is a description, followed by a link to the profile post or web page.
1 Format is tab separated description settings.
2 Name Value
3 WindowPosition 0+0
4 WindowVisibilities
5 Description Text: Write your description of the profile here.___replaced___newline___replaced___newlineSuggested format is a description, followed by a link to the profile post or web page.

4
Settings/.skeinforge/profiles/extrusion.csv Normal file
View File

@ -0,0 +1,4 @@
Format is tab separated extrusion settings.
_Name Value
WindowPosition 0+400
Profile Selection: PLA0.2
1 Format is tab separated extrusion settings.
2 _Name Value
3 WindowPosition 0+400
4 Profile Selection: PLA0.2

9
Settings/.skeinforge/profiles/extrusion/PLA0.2/alteration.csv Normal file
View File

@ -0,0 +1,9 @@
Format is tab separated alteration settings.
_Name Value
WindowPosition 700+0
Open File for Alteration
Activate Alteration True
Name of End File: end.gcode
Name of Start File: start_PLA.gcode
Remove Redundant Mcode True
Replace Variable with Setting True
1 Format is tab separated alteration settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Alteration
5 Activate Alteration True
6 Name of End File: end.gcode
7 Name of Start File: start_PLA.gcode
8 Remove Redundant Mcode True
9 Replace Variable with Setting True

8
Settings/.skeinforge/profiles/extrusion/PLA0.2/bottom.csv Normal file
View File

@ -0,0 +1,8 @@
Format is tab separated bottom settings.
_Name Value
WindowPosition 700+0
Open File for Bottom
Activate Bottom True
Additional Height over Layer Thickness (ratio): 1.0
Altitude (mm): 0.0
SVG Viewer: webbrowser
1 Format is tab separated bottom settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Bottom
5 Activate Bottom True
6 Additional Height over Layer Thickness (ratio): 1.0
7 Altitude (mm): 0.0
8 SVG Viewer: webbrowser

14
Settings/.skeinforge/profiles/extrusion/PLA0.2/carve.csv Normal file
View File

@ -0,0 +1,14 @@
Format is tab separated carve settings.
_Name Value
WindowPosition 700+0
Open File for Carve
Add Layer Template to SVG True
Edge Width over Height (ratio): 2.5
Extra Decimal Places (float): 2.0
Import Coarseness (ratio): 1.0
Layer Height (mm): 0.2
Layers From (index): 0
Layers To (index): 10000
Correct Mesh True
Unproven Mesh False
SVG Viewer: webbrowser
1 Format is tab separated carve settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Carve
5 Add Layer Template to SVG True
6 Edge Width over Height (ratio): 2.5
7 Extra Decimal Places (float): 2.0
8 Import Coarseness (ratio): 1.0
9 Layer Height (mm): 0.2
10 Layers From (index): 0
11 Layers To (index): 10000
12 Correct Mesh True
13 Unproven Mesh False
14 SVG Viewer: webbrowser

11
Settings/.skeinforge/profiles/extrusion/PLA0.2/chamber.csv Normal file
View File

@ -0,0 +1,11 @@
Format is tab separated chamber settings.
_Name Value
WindowPosition 700+0
Open File for Chamber
Activate Chamber False
Bed Temperature (Celcius): 60.0
Bed Temperature Begin Change Height (mm): -1.0
Bed Temperature End Change Height (mm): -1.0
Bed Temperature End (Celcius): 20.0
Chamber Temperature (Celcius): 30.0
Holding Force (bar): 0.0
1 Format is tab separated chamber settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Chamber
5 Activate Chamber False
6 Bed Temperature (Celcius): 60.0
7 Bed Temperature Begin Change Height (mm): -1.0
8 Bed Temperature End Change Height (mm): -1.0
9 Bed Temperature End (Celcius): 20.0
10 Chamber Temperature (Celcius): 30.0
11 Holding Force (bar): 0.0

6
Settings/.skeinforge/profiles/extrusion/PLA0.2/clairvoyance.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated clairvoyance settings.
_Name Value
WindowPosition 700+0
Activate Clairvoyance False
Open File to Generate Clairvoyances for
Gcode Program: webbrowser
1 Format is tab separated clairvoyance settings.
2 _Name Value
3 WindowPosition 700+0
4 Activate Clairvoyance False
5 Open File to Generate Clairvoyances for
6 Gcode Program: webbrowser

7
Settings/.skeinforge/profiles/extrusion/PLA0.2/clip.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated clip settings.
_Name Value
WindowPosition 700+0
Open File for Clip
Activate Clip False
Clip Over Perimeter Width (ratio): 1.0
Maximum Connection Distance Over Perimeter Width (ratio): 10.0
1 Format is tab separated clip settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Clip
5 Activate Clip False
6 Clip Over Perimeter Width (ratio): 1.0
7 Maximum Connection Distance Over Perimeter Width (ratio): 10.0

6
Settings/.skeinforge/profiles/extrusion/PLA0.2/comb.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated comb settings.
_Name Value
WindowPosition 700+0
Open File for Comb
Activate Comb True
Running Jump Space (mm): 2.0
1 Format is tab separated comb settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Comb
5 Activate Comb True
6 Running Jump Space (mm): 2.0

5
Settings/.skeinforge/profiles/extrusion/PLA0.2/comment.csv Normal file
View File

@ -0,0 +1,5 @@
Format is tab separated comment settings.
_Name Value
WindowPosition 700+0
Activate Comment False
Open File to Write Comments for
1 Format is tab separated comment settings.
2 _Name Value
3 WindowPosition 700+0
4 Activate Comment False
5 Open File to Write Comments for

21
Settings/.skeinforge/profiles/extrusion/PLA0.2/cool.csv Normal file
View File

@ -0,0 +1,21 @@
Format is tab separated cool settings.
_Name Value
WindowPosition 700+0
Open File for Cool
Activate Cool True
Full Fan Speed (0 - 255): 255
Turn Fan On at Beginning False
Do Not Use Fan Before Layer (integer): 1
Force Fan on Bridge Layers False
Maximum Layer Time for Fan use (seconds): 240.0
Full Fan Speed Bellow Layer Time (seconds): 239.0
Orbit False
Slow Down True
Maximum Cool (Celcius): 2.0
Minimum Layer Time (seconds): 10.0
Minimum Orbital Radius (millimeters): 10.0
Name of Cool End File: cool_end.gcode
Name of Cool Start File: cool_start.gcode
Bridge Cool (Celcius): 1.0
Orbital Outset (millimeters): 2.0
Turn Fan Off at Ending False
1 Format is tab separated cool settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Cool
5 Activate Cool True
6 Full Fan Speed (0 - 255): 255
7 Turn Fan On at Beginning False
8 Do Not Use Fan Before Layer (integer): 1
9 Force Fan on Bridge Layers False
10 Maximum Layer Time for Fan use (seconds): 240.0
11 Full Fan Speed Bellow Layer Time (seconds): 239.0
12 Orbit False
13 Slow Down True
14 Maximum Cool (Celcius): 2.0
15 Minimum Layer Time (seconds): 10.0
16 Minimum Orbital Radius (millimeters): 10.0
17 Name of Cool End File: cool_end.gcode
18 Name of Cool Start File: cool_start.gcode
19 Bridge Cool (Celcius): 1.0
20 Orbital Outset (millimeters): 2.0
21 Turn Fan Off at Ending False

4
Settings/.skeinforge/profiles/extrusion/PLA0.2/description.csv Normal file
View File

@ -0,0 +1,4 @@
Format is tab separated description settings.
_Name Value
WindowPosition 700+0
Description Text: Write your description of the profile here.___replaced___newline___replaced___newlineSuggested format is a description, followed by a link to the profile post or web page.
1 Format is tab separated description settings.
2 _Name Value
3 WindowPosition 700+0
4 Description Text: Write your description of the profile here.___replaced___newline___replaced___newlineSuggested format is a description, followed by a link to the profile post or web page.

15
Settings/.skeinforge/profiles/extrusion/PLA0.2/dimension.csv Normal file
View File

@ -0,0 +1,15 @@
Format is tab separated dimension settings.
_Name Value
WindowPosition 700+0
Open File for Dimension
Activate Dimension True
Absolute Extrusion Distance False
Relative Extrusion Distance True
Extruder Retraction Speed (mm/s): 20.0
Filament Diameter (mm): 2.86
Filament Packing Density (ratio): 1.0
Maximum E Value before Reset (float): 91234.0
Minimum Travel for Retraction (millimeters): 1.0
Retract Within Island True
Retraction Distance (millimeters): 1.0
Restart Extra Distance (millimeters): 0.0
1 Format is tab separated dimension settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Dimension
5 Activate Dimension True
6 Absolute Extrusion Distance False
7 Relative Extrusion Distance True
8 Extruder Retraction Speed (mm/s): 20.0
9 Filament Diameter (mm): 2.86
10 Filament Packing Density (ratio): 1.0
11 Maximum E Value before Reset (float): 91234.0
12 Minimum Travel for Retraction (millimeters): 1.0
13 Retract Within Island True
14 Retraction Distance (millimeters): 1.0
15 Restart Extra Distance (millimeters): 0.0

9
Settings/.skeinforge/profiles/extrusion/PLA0.2/dwindle.csv Normal file
View File

@ -0,0 +1,9 @@
Format is tab separated dwindle settings.
_Name Value
WindowPosition 700+0
Open File for Dwindle
Activate Dwindle False
End Rate Multiplier (ratio): 0.5
Pent Up Volume (cubic millimeters): 0.4
Slowdown Steps (positive integer): 3
Slowdown Volume (cubic millimeters): 5.0
1 Format is tab separated dwindle settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Dwindle
5 Activate Dwindle False
6 End Rate Multiplier (ratio): 0.5
7 Pent Up Volume (cubic millimeters): 0.4
8 Slowdown Steps (positive integer): 3
9 Slowdown Volume (cubic millimeters): 5.0

22
Settings/.skeinforge/profiles/extrusion/PLA0.2/export.csv Normal file
View File

@ -0,0 +1,22 @@
Format is tab separated export settings.
_Name Value
WindowPosition 700+0
Open File for Export
Activate Export True
Add Descriptive Extension False
Add Export Suffix True
Add Profile Extension False
Add Timestamp Extension False
Also Send Output To:
Analyze Gcode True
Do Not Delete Comments False
Delete Crafting Comments False
Delete All Comments True
Do Not Change Output True
binary_16_byte False
gcode_step False
gcode_time_segment False
gcode_small False
File Extension: gcode
Name of Replace File: replace.csv
Save Penultimate Gcode False
1 Format is tab separated export settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Export
5 Activate Export True
6 Add Descriptive Extension False
7 Add Export Suffix True
8 Add Profile Extension False
9 Add Timestamp Extension False
10 Also Send Output To:
11 Analyze Gcode True
12 Do Not Delete Comments False
13 Delete Crafting Comments False
14 Delete All Comments True
15 Do Not Change Output True
16 binary_16_byte False
17 gcode_step False
18 gcode_time_segment False
19 gcode_small False
20 File Extension: gcode
21 Name of Replace File: replace.csv
22 Save Penultimate Gcode False

35
Settings/.skeinforge/profiles/extrusion/PLA0.2/fill.csv Normal file
View File

@ -0,0 +1,35 @@
Format is tab separated fill settings.
_Name Value
WindowPosition 700+0
Open File for Fill
Activate Fill True
Diaphragm Period (layers): 100
Diaphragm Thickness (layers): 0
Extra Shells on Alternating Solid Layer (layers): 1
Extra Shells on Base (layers): 1
Extra Shells on Sparse Layer (layers): 1
Grid Circle Separation over Perimeter Width (ratio): 0.2
Grid Extra Overlap (ratio): 0.1
Grid Junction Separation Band Height (layers): 10
Grid Junction Separation over Octogon Radius At End (ratio): 0.0
Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0
Infill Begin Rotation (degrees): 45.0
Infill Begin Rotation Repeat (layers): 1
Infill Odd Layer Extra Rotation (degrees): 90.0
Grid Circular False
Grid Hexagonal True
Grid Rectangular False
Line False
Infill Perimeter Overlap (ratio): 0.07
Infill Solidity (ratio): 0.25
Sharpest Angle (degrees): 60.0
Solid Surface Thickness (layers): 5
Lower Left True
Nearest False
Surrounding Angle (degrees): 60.0
Infill > Loops > Perimeter False
Infill > Perimeter > Loops False
Loops > Infill > Perimeter False
Loops > Perimeter > Infill True
Perimeter > Infill > Loops False
Perimeter > Loops > Infill False
1 Format is tab separated fill settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Fill
5 Activate Fill True
6 Diaphragm Period (layers): 100
7 Diaphragm Thickness (layers): 0
8 Extra Shells on Alternating Solid Layer (layers): 1
9 Extra Shells on Base (layers): 1
10 Extra Shells on Sparse Layer (layers): 1
11 Grid Circle Separation over Perimeter Width (ratio): 0.2
12 Grid Extra Overlap (ratio): 0.1
13 Grid Junction Separation Band Height (layers): 10
14 Grid Junction Separation over Octogon Radius At End (ratio): 0.0
15 Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0
16 Infill Begin Rotation (degrees): 45.0
17 Infill Begin Rotation Repeat (layers): 1
18 Infill Odd Layer Extra Rotation (degrees): 90.0
19 Grid Circular False
20 Grid Hexagonal True
21 Grid Rectangular False
22 Line False
23 Infill Perimeter Overlap (ratio): 0.07
24 Infill Solidity (ratio): 0.25
25 Sharpest Angle (degrees): 60.0
26 Solid Surface Thickness (layers): 5
27 Lower Left True
28 Nearest False
29 Surrounding Angle (degrees): 60.0
30 Infill > Loops > Perimeter False
31 Infill > Perimeter > Loops False
32 Loops > Infill > Perimeter False
33 Loops > Perimeter > Infill True
34 Perimeter > Infill > Loops False
35 Perimeter > Loops > Infill False

13
Settings/.skeinforge/profiles/extrusion/PLA0.2/fillet.csv Normal file
View File

@ -0,0 +1,13 @@
Format is tab separated fillet settings.
_Name Value
WindowPosition 700+0
Open File to be Filleted
Activate Fillet False
Arc Point False
Arc Radius False
Arc Segment False
Bevel True
Corner Feed Rate Multiplier (ratio): 1.0
Fillet Radius over Perimeter Width (ratio): 0.35
Reversal Slowdown Distance over Perimeter Width (ratio): 0.5
Use Intermediate Feed Rate in Corners True
1 Format is tab separated fillet settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File to be Filleted
5 Activate Fillet False
6 Arc Point False
7 Arc Radius False
8 Arc Segment False
9 Bevel True
10 Corner Feed Rate Multiplier (ratio): 1.0
11 Fillet Radius over Perimeter Width (ratio): 0.35
12 Reversal Slowdown Distance over Perimeter Width (ratio): 0.5
13 Use Intermediate Feed Rate in Corners True

6
Settings/.skeinforge/profiles/extrusion/PLA0.2/home.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated home settings.
_Name Value
WindowPosition 700+0
Open File for Home
Activate Home False
Name of Home File: home.gcode
1 Format is tab separated home settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Home
5 Activate Home False
6 Name of Home File: home.gcode

7
Settings/.skeinforge/profiles/extrusion/PLA0.2/hop.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated hop settings.
_Name Value
WindowPosition 700+0
Open File for Hop
Activate Hop False
Hop Over Layer Thickness (ratio): 1.0
Minimum Hop Angle (degrees): 30.0
1 Format is tab separated hop settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Hop
5 Activate Hop False
6 Hop Over Layer Thickness (ratio): 1.0
7 Minimum Hop Angle (degrees): 30.0

12
Settings/.skeinforge/profiles/extrusion/PLA0.2/inset.csv Normal file
View File

@ -0,0 +1,12 @@
Format is tab separated inset settings.
_Name Value
WindowPosition 700+0
Open File for Inset
Add Custom Code for Temperature Reading False
Infill in Direction of Bridge True
Infill Width over Thickness (ratio): 2.25
Ascending Area False
Descending Area True
Overlap Removal Width over Perimeter Width (ratio): 0.0
Turn Extruder Heater Off at Shut Down False
Volume Fraction (ratio): 0.9
1 Format is tab separated inset settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Inset
5 Add Custom Code for Temperature Reading False
6 Infill in Direction of Bridge True
7 Infill Width over Thickness (ratio): 2.25
8 Ascending Area False
9 Descending Area True
10 Overlap Removal Width over Perimeter Width (ratio): 0.0
11 Turn Extruder Heater Off at Shut Down False
12 Volume Fraction (ratio): 0.9

7
Settings/.skeinforge/profiles/extrusion/PLA0.2/interpret.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated interpret settings.
_Name Value
WindowPosition 700+0
Open File for Interpret
Activate Interpret False
Print Interpretion False
Text Program: webbrowser
1 Format is tab separated interpret settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Interpret
5 Activate Interpret False
6 Print Interpretion False
7 Text Program: webbrowser

6
Settings/.skeinforge/profiles/extrusion/PLA0.2/jitter.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated jitter settings.
_Name Value
WindowPosition 700+0
Open File for Jitter
Activate Jitter True
Jitter Over Perimeter Width (ratio): 10.0
1 Format is tab separated jitter settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Jitter
5 Activate Jitter True
6 Jitter Over Perimeter Width (ratio): 10.0

7
Settings/.skeinforge/profiles/extrusion/PLA0.2/lash.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated lash settings.
_Name Value
WindowPosition 700+0
Open File for Lash
Activate Lash False
X Backlash (mm): 0.2
Y Backlash (mm): 0.3
1 Format is tab separated lash settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Lash
5 Activate Lash False
6 X Backlash (mm): 0.2
7 Y Backlash (mm): 0.3

6
Settings/.skeinforge/profiles/extrusion/PLA0.2/limit.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated limit settings.
_Name Value
WindowPosition 700+0
Open File for Limit
Activate Limit False
Maximum Initial Feed Rate (mm/s): 1.0
1 Format is tab separated limit settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Limit
5 Activate Limit False
6 Maximum Initial Feed Rate (mm/s): 1.0

11
Settings/.skeinforge/profiles/extrusion/PLA0.2/multiply.csv Normal file
View File

@ -0,0 +1,11 @@
Format is tab separated multiply settings.
_Name Value
WindowPosition 700+0
Open File for Multiply H:/CHRIS/Projects/RepRaptor/Mendel/YAGE/drive-gear-with-boss_export.gcode
Activate Multiply True
Center X (mm): 0.0
Center Y (mm): 0.0
Number of Columns (integer): 1
Number of Rows (integer): 1
Reverse Sequence every Odd Layer False
Separation over Perimeter Width (ratio): 3.0
1 Format is tab separated multiply settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Multiply H:/CHRIS/Projects/RepRaptor/Mendel/YAGE/drive-gear-with-boss_export.gcode
5 Activate Multiply True
6 Center X (mm): 0.0
7 Center Y (mm): 0.0
8 Number of Columns (integer): 1
9 Number of Rows (integer): 1
10 Reverse Sequence every Odd Layer False
11 Separation over Perimeter Width (ratio): 3.0

13
Settings/.skeinforge/profiles/extrusion/PLA0.2/oozebane.csv Normal file
View File

@ -0,0 +1,13 @@
Format is tab separated oozebane settings.
_Name Value
WindowPosition 700+0
Open File for Oozebane
Activate Oozebane False
After Startup Distance (millimeters): 1.2
Early Shutdown Distance (millimeters): 1.2
Early Startup Distance Constant (millimeters): 20.0
Early Startup Maximum Distance (millimeters): 1.2
First Early Startup Distance (millimeters): 25.0
Minimum Distance for Early Startup (millimeters): 0.0
Minimum Distance for Early Shutdown (millimeters): 0.0
Slowdown Startup Steps (positive integer): 3
1 Format is tab separated oozebane settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Oozebane
5 Activate Oozebane False
6 After Startup Distance (millimeters): 1.2
7 Early Shutdown Distance (millimeters): 1.2
8 Early Startup Distance Constant (millimeters): 20.0
9 Early Startup Maximum Distance (millimeters): 1.2
10 First Early Startup Distance (millimeters): 25.0
11 Minimum Distance for Early Startup (millimeters): 0.0
12 Minimum Distance for Early Shutdown (millimeters): 0.0
13 Slowdown Startup Steps (positive integer): 3

10
Settings/.skeinforge/profiles/extrusion/PLA0.2/preface.csv Normal file
View File

@ -0,0 +1,10 @@
Format is tab separated preface settings.
_Name Value
WindowPosition 700+0
Open File for Preface
Meta:
Set Positioning to Absolute False
Set Units to Millimeters False
Start at Home False
Turn Extruder Off at Shut Down False
Turn Extruder Off at Start Up False
1 Format is tab separated preface settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Preface
5 Meta:
6 Set Positioning to Absolute False
7 Set Units to Millimeters False
8 Start at Home False
9 Turn Extruder Off at Shut Down False
10 Turn Extruder Off at Start Up False

33
Settings/.skeinforge/profiles/extrusion/PLA0.2/raft.csv Normal file
View File

@ -0,0 +1,33 @@
Format is tab separated raft settings.
_Name Value
WindowPosition 700+0
Open File for Raft
Activate Raft False
Add Raft, Elevate Nozzle, Orbit: True
Base Feed Rate Multiplier (ratio): 1.0
Base Flow Rate Multiplier (ratio): 1.0
Base Infill Density (ratio): 0.5
Base Layer Thickness over Layer Thickness: 2.0
Base Layers (integer): 0
Base Nozzle Lift over Base Layer Thickness (ratio): 0.4
Initial Circling: False
Infill Overhang over Extrusion Width (ratio): 0.05
Interface Feed Rate Multiplier (ratio): 1.0
Interface Flow Rate Multiplier (ratio): 1.0
Interface Infill Density (ratio): 1.0
Interface Layer Thickness over Layer Thickness: 1.0
Interface Layers (integer): 0
Interface Nozzle Lift over Interface Layer Thickness (ratio): 0.45
Name of Support End File: support_end.gcode
Name of Support Start File: support_start.gcode
Operating Nozzle Lift over Layer Thickness (ratio): 0.5
Raft Additional Margin over Length (%): 1.0
Raft Margin (mm): 5.0
Support Cross Hatch False
Support Flow Rate over Operating Flow Rate (ratio): 1.0
Support Gap over Perimeter Extrusion Width (ratio): 0.0
None False
Empty Layers Only False
Everywhere False
Exterior Only True
Support Minimum Angle (degrees): 40.0
1 Format is tab separated raft settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Raft
5 Activate Raft False
6 Add Raft, Elevate Nozzle, Orbit: True
7 Base Feed Rate Multiplier (ratio): 1.0
8 Base Flow Rate Multiplier (ratio): 1.0
9 Base Infill Density (ratio): 0.5
10 Base Layer Thickness over Layer Thickness: 2.0
11 Base Layers (integer): 0
12 Base Nozzle Lift over Base Layer Thickness (ratio): 0.4
13 Initial Circling: False
14 Infill Overhang over Extrusion Width (ratio): 0.05
15 Interface Feed Rate Multiplier (ratio): 1.0
16 Interface Flow Rate Multiplier (ratio): 1.0
17 Interface Infill Density (ratio): 1.0
18 Interface Layer Thickness over Layer Thickness: 1.0
19 Interface Layers (integer): 0
20 Interface Nozzle Lift over Interface Layer Thickness (ratio): 0.45
21 Name of Support End File: support_end.gcode
22 Name of Support Start File: support_start.gcode
23 Operating Nozzle Lift over Layer Thickness (ratio): 0.5
24 Raft Additional Margin over Length (%): 1.0
25 Raft Margin (mm): 5.0
26 Support Cross Hatch False
27 Support Flow Rate over Operating Flow Rate (ratio): 1.0
28 Support Gap over Perimeter Extrusion Width (ratio): 0.0
29 None False
30 Empty Layers Only False
31 Everywhere False
32 Exterior Only True
33 Support Minimum Angle (degrees): 40.0

8
Settings/.skeinforge/profiles/extrusion/PLA0.2/scale.csv Normal file
View File

@ -0,0 +1,8 @@
Format is tab separated scale settings.
_Name Value
WindowPosition 700+0
Open File for Scale
Activate Scale False
XY Plane Scale (ratio): 1.01
Z Axis Scale (ratio): 1.0
SVG Viewer: webbrowser
1 Format is tab separated scale settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Scale
5 Activate Scale False
6 XY Plane Scale (ratio): 1.01
7 Z Axis Scale (ratio): 1.0
8 SVG Viewer: webbrowser

9
Settings/.skeinforge/profiles/extrusion/PLA0.2/skeinforge.csv Normal file
View File

@ -0,0 +1,9 @@
Format is tab separated skeinforge settings.
_Name Value
WindowPosition 548+0
Open File for Skeinforge W:/chris/projects/RepRaptor/FlatPackBot/dibond/stls/printed/cal.stl
analyze False
craft True
help False
meta False
profile False
1 Format is tab separated skeinforge settings.
2 _Name Value
3 WindowPosition 548+0
4 Open File for Skeinforge W:/chris/projects/RepRaptor/FlatPackBot/dibond/stls/printed/cal.stl
5 analyze False
6 craft True
7 help False
8 meta False
9 profile False

12
Settings/.skeinforge/profiles/extrusion/PLA0.2/skeinforge_analyze.csv Normal file
View File

@ -0,0 +1,12 @@
Format is tab separated skeinforge analyze settings.
_Name Value
WindowPosition 600+0
Open File for Analyze
clairvoyance False
comment False
interpret False
skeiniso False
skeinlayer False
statistic False
synopsis False
vectorwrite True
1 Format is tab separated skeinforge analyze settings.
2 _Name Value
3 WindowPosition 600+0
4 Open File for Analyze
5 clairvoyance False
6 comment False
7 interpret False
8 skeiniso False
9 skeinlayer False
10 statistic False
11 synopsis False
12 vectorwrite True

49
Settings/.skeinforge/profiles/extrusion/PLA0.2/skeinforge_craft.csv Normal file
View File

@ -0,0 +1,49 @@
Format is tab separated skeinforge craft settings.
_Name Value
WindowPosition 600+0
Open File for Craft
alteration False
bottom False
carve False
chamber False
chop False
cleave False
clip False
coil False
comb False
cool True
dimension False
drill False
dwindle False
export False
feed False
fill False
fillet False
flow False
home False
hop False
inset False
jitter False
lash False
lift False
limit False
mill False
multiply False
oozebane False
original_cool False
outset False
preface False
raft False
scale False
skin False
skirt False
smooth False
speed False
splodge False
stretch False
temperature False
tower False
unpause False
whittle False
widen False
wipe False
1 Format is tab separated skeinforge craft settings.
2 _Name Value
3 WindowPosition 600+0
4 Open File for Craft
5 alteration False
6 bottom False
7 carve False
8 chamber False
9 chop False
10 cleave False
11 clip False
12 coil False
13 comb False
14 cool True
15 dimension False
16 drill False
17 dwindle False
18 export False
19 feed False
20 fill False
21 fillet False
22 flow False
23 home False
24 hop False
25 inset False
26 jitter False
27 lash False
28 lift False
29 limit False
30 mill False
31 multiply False
32 oozebane False
33 original_cool False
34 outset False
35 preface False
36 raft False
37 scale False
38 skin False
39 skirt False
40 smooth False
41 speed False
42 splodge False
43 stretch False
44 temperature False
45 tower False
46 unpause False
47 whittle False
48 widen False
49 wipe False

4
Settings/.skeinforge/profiles/extrusion/PLA0.2/skeinforge_help.csv Normal file
View File

@ -0,0 +1,4 @@
Format is tab separated skeinforge help settings.
_Name Value
WindowPosition 600+0
Wiki Manual Primary True
1 Format is tab separated skeinforge help settings.
2 _Name Value
3 WindowPosition 600+0
4 Wiki Manual Primary True

5
Settings/.skeinforge/profiles/extrusion/PLA0.2/skeinforge_meta.csv Normal file
View File

@ -0,0 +1,5 @@
Format is tab separated skeinforge meta settings.
_Name Value
WindowPosition 600+0
description False
polyfile True
1 Format is tab separated skeinforge meta settings.
2 _Name Value
3 WindowPosition 600+0
4 description False
5 polyfile True

5
Settings/.skeinforge/profiles/extrusion/PLA0.2/skeinforge_polyfile.csv Normal file
View File

@ -0,0 +1,5 @@
Format is tab separated skeinforge polyfile settings.
_Name Value
WindowPosition 600+0
Execute All Unmodified Files in a Directory False
Execute File True
1 Format is tab separated skeinforge polyfile settings.
2 _Name Value
3 WindowPosition 600+0
4 Execute All Unmodified Files in a Directory False
5 Execute File True

41
Settings/.skeinforge/profiles/extrusion/PLA0.2/skeiniso.csv Normal file
View File

@ -0,0 +1,41 @@
Format is tab separated skeiniso settings.
_Name Value
WindowPosition 700+0
Open File for Skeiniso
Activate Skeiniso False
Frame List
Animation Line Quickening (ratio): 1.0
Animation Slide Show Rate (layers/second): 2.0
Axis Rulings True
Band Height (layers): 5
Bottom Band Brightness (ratio): 0.7
Bottom Layer Brightness (ratio): 1.0
From the Bottom False
From the Top True
Draw Arrows False
Go Around Extruder Off Travel False
Layer (index): 0
Layer Extra Span (integer): 912345678
Line (index): 0
Display Line True
View Move False
View Rotate False
Number of Fill Bottom Layers (integer): 1
Number of Fill Top Layers (integer): 1
Scale (pixels per millimeter): 15.0
Screen Horizontal Inset (pixels): 100
Screen Vertical Inset (pixels): 220
Show Gcode True
Viewpoint Latitude (degrees): 15.0
Viewpoint Longitude (degrees): 210.0
Width of Axis Negative Side (pixels): 2
Width of Axis Positive Side (pixels): 6
Width of Fill Bottom Thread (pixels): 2
Width of Fill Top Thread (pixels): 2
Width of Infill Thread (pixels): 1
Width of Loop Thread (pixels): 2
Width of Perimeter Inside Thread (pixels): 8
Width of Perimeter Outside Thread (pixels): 8
Width of Raft Thread (pixels): 1
Width of Selection Thread (pixels): 6
Width of Travel Thread (pixels): 0
1 Format is tab separated skeiniso settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Skeiniso
5 Activate Skeiniso False
6 Frame List
7 Animation Line Quickening (ratio): 1.0
8 Animation Slide Show Rate (layers/second): 2.0
9 Axis Rulings True
10 Band Height (layers): 5
11 Bottom Band Brightness (ratio): 0.7
12 Bottom Layer Brightness (ratio): 1.0
13 From the Bottom False
14 From the Top True
15 Draw Arrows False
16 Go Around Extruder Off Travel False
17 Layer (index): 0
18 Layer Extra Span (integer): 912345678
19 Line (index): 0
20 Display Line True
21 View Move False
22 View Rotate False
23 Number of Fill Bottom Layers (integer): 1
24 Number of Fill Top Layers (integer): 1
25 Scale (pixels per millimeter): 15.0
26 Screen Horizontal Inset (pixels): 100
27 Screen Vertical Inset (pixels): 220
28 Show Gcode True
29 Viewpoint Latitude (degrees): 15.0
30 Viewpoint Longitude (degrees): 210.0
31 Width of Axis Negative Side (pixels): 2
32 Width of Axis Positive Side (pixels): 6
33 Width of Fill Bottom Thread (pixels): 2
34 Width of Fill Top Thread (pixels): 2
35 Width of Infill Thread (pixels): 1
36 Width of Loop Thread (pixels): 2
37 Width of Perimeter Inside Thread (pixels): 8
38 Width of Perimeter Outside Thread (pixels): 8
39 Width of Raft Thread (pixels): 1
40 Width of Selection Thread (pixels): 6
41 Width of Travel Thread (pixels): 0

23
Settings/.skeinforge/profiles/extrusion/PLA0.2/skeinlayer.csv Normal file
View File

@ -0,0 +1,23 @@
Format is tab separated skeinlayer settings.
_Name Value
WindowPosition 700+0
Open File for Skeinlayer
Activate Skeinlayer True
Frame List
Animation Line Quickening (ratio): 1.0
Animation Slide Show Rate (layers/second): 2.0
Draw Arrows True
Go Around Extruder Off Travel False
Layer (index): 0
Layer Extra Span (integer): 0
Line (index): 526
Display Line True
View Move False
Scale (pixels per millimeter): 10.0
Screen Horizontal Inset (pixels): 100
Screen Vertical Inset (pixels): 220
Show Gcode True
Show Position True
Width of Extrusion Thread (pixels): 3
Width of Selection Thread (pixels): 6
Width of Travel Thread (pixels): 1
1 Format is tab separated skeinlayer settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Skeinlayer
5 Activate Skeinlayer True
6 Frame List
7 Animation Line Quickening (ratio): 1.0
8 Animation Slide Show Rate (layers/second): 2.0
9 Draw Arrows True
10 Go Around Extruder Off Travel False
11 Layer (index): 0
12 Layer Extra Span (integer): 0
13 Line (index): 526
14 Display Line True
15 View Move False
16 Scale (pixels per millimeter): 10.0
17 Screen Horizontal Inset (pixels): 100
18 Screen Vertical Inset (pixels): 220
19 Show Gcode True
20 Show Position True
21 Width of Extrusion Thread (pixels): 3
22 Width of Selection Thread (pixels): 6
23 Width of Travel Thread (pixels): 1

10
Settings/.skeinforge/profiles/extrusion/PLA0.2/skin.csv Normal file
View File

@ -0,0 +1,10 @@
Format is tab separated skin settings.
_Name Value
WindowPosition 700+0
Open File for Skin
Activate Skin False
Horizontal Infill Divisions (integer): 2
Horizontal Perimeter Divisions (integer): 1
Vertical Divisions (integer): 2
Hop When Extruding Infill False
Layers From (index): 1
1 Format is tab separated skin settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Skin
5 Activate Skin False
6 Horizontal Infill Divisions (integer): 2
7 Horizontal Perimeter Divisions (integer): 1
8 Vertical Divisions (integer): 2
9 Hop When Extruding Infill False
10 Layers From (index): 1

8
Settings/.skeinforge/profiles/extrusion/PLA0.2/skirt.csv Normal file
View File

@ -0,0 +1,8 @@
Format is tab separated skirt settings.
_Name Value
WindowPosition 700+0
Open File for Skirt
Activate Skirt True
Convex: False
Gap over Perimeter Width (ratio): 10.0
Layers To (index): 1
1 Format is tab separated skirt settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Skirt
5 Activate Skirt True
6 Convex: False
7 Gap over Perimeter Width (ratio): 10.0
8 Layers To (index): 1

7
Settings/.skeinforge/profiles/extrusion/PLA0.2/smooth.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated smooth settings.
_Name Value
WindowPosition 700+0
Open File for Smooth
Activate Smooth False
Layers From (index): 1
Maximum Shortening over Width (float): 1.2
1 Format is tab separated smooth settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Smooth
5 Activate Smooth False
6 Layers From (index): 1
7 Maximum Shortening over Width (float): 1.2

21
Settings/.skeinforge/profiles/extrusion/PLA0.2/speed.csv Normal file
View File

@ -0,0 +1,21 @@
Format is tab separated speed settings.
_Name Value
WindowPosition 700+0
Open File for Speed
Activate Speed True
Add Flow Rate: True
Bridge Feed Rate Multiplier (ratio): 1.0
Bridge Flow Rate Multiplier (ratio): 1.0
Duty Cyle at Beginning (portion): 1.0
Duty Cyle at Ending (portion): 0.0
Feed Rate (mm/s): 50.0
Flow Rate Setting (float): 50.0
Object First Layer Feed Rate Infill Multiplier (ratio): 0.5
Object First Layer Feed Rate Perimeter Multiplier (ratio): 0.5
Object First Layer Flow Rate Infill Multiplier (ratio): 0.5
Object First Layer Flow Rate Perimeter Multiplier (ratio): 0.5
Orbital Feed Rate over Operating Feed Rate (ratio): 0.5
Maximum Z Feed Rate (mm/s): 8.0
Perimeter Feed Rate Multiplier (ratio): 1.0
Perimeter Flow Rate Multiplier (ratio): 0.914
Travel Feed Rate (mm/s): 200.0
1 Format is tab separated speed settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Speed
5 Activate Speed True
6 Add Flow Rate: True
7 Bridge Feed Rate Multiplier (ratio): 1.0
8 Bridge Flow Rate Multiplier (ratio): 1.0
9 Duty Cyle at Beginning (portion): 1.0
10 Duty Cyle at Ending (portion): 0.0
11 Feed Rate (mm/s): 50.0
12 Flow Rate Setting (float): 50.0
13 Object First Layer Feed Rate Infill Multiplier (ratio): 0.5
14 Object First Layer Feed Rate Perimeter Multiplier (ratio): 0.5
15 Object First Layer Flow Rate Infill Multiplier (ratio): 0.5
16 Object First Layer Flow Rate Perimeter Multiplier (ratio): 0.5
17 Orbital Feed Rate over Operating Feed Rate (ratio): 0.5
18 Maximum Z Feed Rate (mm/s): 8.0
19 Perimeter Feed Rate Multiplier (ratio): 1.0
20 Perimeter Flow Rate Multiplier (ratio): 0.914
21 Travel Feed Rate (mm/s): 200.0

11
Settings/.skeinforge/profiles/extrusion/PLA0.2/splodge.csv Normal file
View File

@ -0,0 +1,11 @@
Format is tab separated splodge settings.
_Name Value
WindowPosition 700+0
Open File for Splodge
Activate Splodge False
Initial Lift over Extra Thickness (ratio): 1.0
Initial Splodge Feed Rate (mm/s): 1.0
Initial Splodge Quantity Length (millimeters): 30.0
Operating Lift over Extra Thickness (ratio): 1.0
Operating Splodge Feed Rate (mm/s): 1.0
Operating Splodge Quantity Length (millimeters): 1.0
1 Format is tab separated splodge settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Splodge
5 Activate Splodge False
6 Initial Lift over Extra Thickness (ratio): 1.0
7 Initial Splodge Feed Rate (mm/s): 1.0
8 Initial Splodge Quantity Length (millimeters): 30.0
9 Operating Lift over Extra Thickness (ratio): 1.0
10 Operating Splodge Feed Rate (mm/s): 1.0
11 Operating Splodge Quantity Length (millimeters): 1.0

10
Settings/.skeinforge/profiles/extrusion/PLA0.2/statistic.csv Normal file
View File

@ -0,0 +1,10 @@
Format is tab separated statistic settings.
_Name Value
WindowPosition 700+0
Activate Statistic True
Machine Time ($/hour): 1.0
Material ($/kg): 20.0
Density (kg/m3): 930.0
Open File to Generate Statistics for
Print Statistics True
Save Statistics False
1 Format is tab separated statistic settings.
2 _Name Value
3 WindowPosition 700+0
4 Activate Statistic True
5 Machine Time ($/hour): 1.0
6 Material ($/kg): 20.0
7 Density (kg/m3): 930.0
8 Open File to Generate Statistics for
9 Print Statistics True
10 Save Statistics False

11
Settings/.skeinforge/profiles/extrusion/PLA0.2/stretch.csv Normal file
View File

@ -0,0 +1,11 @@
Format is tab separated stretch settings.
_Name Value
WindowPosition 700+0
Open File for Stretch
Activate Stretch False
Cross Limit Distance Over Perimeter Width (ratio): 5.0
Loop Stretch Over Perimeter Width (ratio): 0.11
Path Stretch Over Perimeter Width (ratio): 0.0
Perimeter Inside Stretch Over Perimeter Width (ratio): 0.32
Perimeter Outside Stretch Over Perimeter Width (ratio): 0.1
Stretch From Distance Over Perimeter Width (ratio): 2.0
1 Format is tab separated stretch settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Stretch
5 Activate Stretch False
6 Cross Limit Distance Over Perimeter Width (ratio): 5.0
7 Loop Stretch Over Perimeter Width (ratio): 0.11
8 Path Stretch Over Perimeter Width (ratio): 0.0
9 Perimeter Inside Stretch Over Perimeter Width (ratio): 0.32
10 Perimeter Outside Stretch Over Perimeter Width (ratio): 0.1
11 Stretch From Distance Over Perimeter Width (ratio): 2.0

7
Settings/.skeinforge/profiles/extrusion/PLA0.2/synopsis.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated synopsis settings.
_Name Value
WindowPosition 700+0
Activate Synopsis False
Open File to Write Synopsis for
Export Profile As CSV File True
Export Profile As Zip File False
1 Format is tab separated synopsis settings.
2 _Name Value
3 WindowPosition 700+0
4 Activate Synopsis False
5 Open File to Write Synopsis for
6 Export Profile As CSV File True
7 Export Profile As Zip File False

14
Settings/.skeinforge/profiles/extrusion/PLA0.2/temperature.csv Normal file
View File

@ -0,0 +1,14 @@
Format is tab separated temperature settings.
_Name Value
WindowPosition 600+0
Open File for Temperature
Activate Temperature False
Cooling Rate (Celcius/second): 3.0
Heating Rate (Celcius/second): 10.0
Base Temperature (Celcius): 200.0
Interface Temperature (Celcius): 200.0
Object First Layer Infill Temperature (Celcius): 195.0
Object First Layer Perimeter Temperature (Celcius): 220.0
Object Next Layers Temperature (Celcius): 230.0
Support Layers Temperature (Celcius): 200.0
Supported Layers Temperature (Celcius): 230.0
1 Format is tab separated temperature settings.
2 _Name Value
3 WindowPosition 600+0
4 Open File for Temperature
5 Activate Temperature False
6 Cooling Rate (Celcius/second): 3.0
7 Heating Rate (Celcius/second): 10.0
8 Base Temperature (Celcius): 200.0
9 Interface Temperature (Celcius): 200.0
10 Object First Layer Infill Temperature (Celcius): 195.0
11 Object First Layer Perimeter Temperature (Celcius): 220.0
12 Object Next Layers Temperature (Celcius): 230.0
13 Support Layers Temperature (Celcius): 200.0
14 Supported Layers Temperature (Celcius): 230.0

8
Settings/.skeinforge/profiles/extrusion/PLA0.2/tower.csv Normal file
View File

@ -0,0 +1,8 @@
Format is tab separated tower settings.
_Name Value
WindowPosition 700+0
Open File for Tower
Activate Tower False
Extruder Possible Collision Cone Angle (degrees): 60.0
Maximum Tower Height (layers): 5
Tower Start Layer (integer): 1
1 Format is tab separated tower settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Tower
5 Activate Tower False
6 Extruder Possible Collision Cone Angle (degrees): 60.0
7 Maximum Tower Height (layers): 5
8 Tower Start Layer (integer): 1

7
Settings/.skeinforge/profiles/extrusion/PLA0.2/unpause.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated unpause settings.
_Name Value
WindowPosition 700+0
Open File for Unpause
Activate Unpause False
Delay (milliseconds): 28.0
Maximum Speed (ratio): 1.3
1 Format is tab separated unpause settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Unpause
5 Activate Unpause False
6 Delay (milliseconds): 28.0
7 Maximum Speed (ratio): 1.3

12
Settings/.skeinforge/profiles/extrusion/PLA0.2/vectorwrite.csv Normal file
View File

@ -0,0 +1,12 @@
Format is tab separated vectorwrite settings.
_Name Value
WindowPosition 700+0
Activate Vectorwrite False
Open File to Write Vector Graphics for
Add Layer Template to SVG True
Add Loops True
Add Paths True
Add Perimeters True
Layers From (index): 0
Layers To (index): 0
SVG Viewer: webbrowser
1 Format is tab separated vectorwrite settings.
2 _Name Value
3 WindowPosition 700+0
4 Activate Vectorwrite False
5 Open File to Write Vector Graphics for
6 Add Layer Template to SVG True
7 Add Loops True
8 Add Paths True
9 Add Perimeters True
10 Layers From (index): 0
11 Layers To (index): 0
12 SVG Viewer: webbrowser

6
Settings/.skeinforge/profiles/extrusion/PLA0.2/widen.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated widen settings.
_Name Value
WindowPosition 700+0
Open File for Widen
Activate Widen False
Widen Width over Edge Width (ratio): 2
1 Format is tab separated widen settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Widen
5 Activate Widen False
6 Widen Width over Edge Width (ratio): 2

15
Settings/.skeinforge/profiles/extrusion/PLA0.2/wipe.csv Normal file
View File

@ -0,0 +1,15 @@
Format is tab separated wipe settings.
_Name Value
WindowPosition 700+0
Open File for Wipe
Activate Wipe False
Arrival X (mm): -70.0
Arrival Y (mm): -50.0
Arrival Z (mm): 50.0
Departure X (mm): -70.0
Departure Y (mm): -40.0
Departure Z (mm): 50.0
Wipe X (mm): -70.0
Wipe Y (mm): -70.0
Wipe Z (mm): 50.0
Wipe Period (layers): 3
1 Format is tab separated wipe settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Wipe
5 Activate Wipe False
6 Arrival X (mm): -70.0
7 Arrival Y (mm): -50.0
8 Arrival Z (mm): 50.0
9 Departure X (mm): -70.0
10 Departure Y (mm): -40.0
11 Departure Z (mm): 50.0
12 Wipe X (mm): -70.0
13 Wipe Y (mm): -70.0
14 Wipe Z (mm): 50.0
15 Wipe Period (layers): 3

9
Settings/.skeinforge/profiles/extrusion/PLA0.3/alteration.csv Normal file
View File

@ -0,0 +1,9 @@
Format is tab separated alteration settings.
_Name Value
WindowPosition 700+0
Open File for Alteration
Activate Alteration True
Name of End File: end.gcode
Name of Start File: start_PLA.gcode
Remove Redundant Mcode True
Replace Variable with Setting True
1 Format is tab separated alteration settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Alteration
5 Activate Alteration True
6 Name of End File: end.gcode
7 Name of Start File: start_PLA.gcode
8 Remove Redundant Mcode True
9 Replace Variable with Setting True

8
Settings/.skeinforge/profiles/extrusion/PLA0.3/bottom.csv Normal file
View File

@ -0,0 +1,8 @@
Format is tab separated bottom settings.
_Name Value
WindowPosition 700+0
Open File for Bottom
Activate Bottom True
Additional Height over Layer Thickness (ratio): 1.0
Altitude (mm): 0.0
SVG Viewer: webbrowser
1 Format is tab separated bottom settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Bottom
5 Activate Bottom True
6 Additional Height over Layer Thickness (ratio): 1.0
7 Altitude (mm): 0.0
8 SVG Viewer: webbrowser

14
Settings/.skeinforge/profiles/extrusion/PLA0.3/carve.csv Normal file
View File

@ -0,0 +1,14 @@
Format is tab separated carve settings.
_Name Value
WindowPosition 700+0
Open File for Carve
Add Layer Template to SVG True
Edge Width over Height (ratio): 1.5
Extra Decimal Places (float): 2.0
Import Coarseness (ratio): 1.0
Layer Height (mm): 0.3
Layers From (index): 0
Layers To (index): 10000
Correct Mesh True
Unproven Mesh False
SVG Viewer: webbrowser
1 Format is tab separated carve settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Carve
5 Add Layer Template to SVG True
6 Edge Width over Height (ratio): 1.5
7 Extra Decimal Places (float): 2.0
8 Import Coarseness (ratio): 1.0
9 Layer Height (mm): 0.3
10 Layers From (index): 0
11 Layers To (index): 10000
12 Correct Mesh True
13 Unproven Mesh False
14 SVG Viewer: webbrowser

11
Settings/.skeinforge/profiles/extrusion/PLA0.3/chamber.csv Normal file
View File

@ -0,0 +1,11 @@
Format is tab separated chamber settings.
_Name Value
WindowPosition 700+0
Open File for Chamber
Activate Chamber False
Bed Temperature (Celcius): 60.0
Bed Temperature Begin Change Height (mm): -1.0
Bed Temperature End Change Height (mm): -1.0
Bed Temperature End (Celcius): 20.0
Chamber Temperature (Celcius): 30.0
Holding Force (bar): 0.0
1 Format is tab separated chamber settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Chamber
5 Activate Chamber False
6 Bed Temperature (Celcius): 60.0
7 Bed Temperature Begin Change Height (mm): -1.0
8 Bed Temperature End Change Height (mm): -1.0
9 Bed Temperature End (Celcius): 20.0
10 Chamber Temperature (Celcius): 30.0
11 Holding Force (bar): 0.0

6
Settings/.skeinforge/profiles/extrusion/PLA0.3/clairvoyance.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated clairvoyance settings.
_Name Value
WindowPosition 700+0
Activate Clairvoyance False
Open File to Generate Clairvoyances for
Gcode Program: webbrowser
1 Format is tab separated clairvoyance settings.
2 _Name Value
3 WindowPosition 700+0
4 Activate Clairvoyance False
5 Open File to Generate Clairvoyances for
6 Gcode Program: webbrowser

7
Settings/.skeinforge/profiles/extrusion/PLA0.3/clip.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated clip settings.
_Name Value
WindowPosition 700+0
Open File for Clip
Activate Clip False
Clip Over Perimeter Width (ratio): 1.0
Maximum Connection Distance Over Perimeter Width (ratio): 10.0
1 Format is tab separated clip settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Clip
5 Activate Clip False
6 Clip Over Perimeter Width (ratio): 1.0
7 Maximum Connection Distance Over Perimeter Width (ratio): 10.0

6
Settings/.skeinforge/profiles/extrusion/PLA0.3/comb.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated comb settings.
_Name Value
WindowPosition 700+0
Open File for Comb
Activate Comb True
Running Jump Space (mm): 2.0
1 Format is tab separated comb settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Comb
5 Activate Comb True
6 Running Jump Space (mm): 2.0

5
Settings/.skeinforge/profiles/extrusion/PLA0.3/comment.csv Normal file
View File

@ -0,0 +1,5 @@
Format is tab separated comment settings.
_Name Value
WindowPosition 700+0
Activate Comment False
Open File to Write Comments for
1 Format is tab separated comment settings.
2 _Name Value
3 WindowPosition 700+0
4 Activate Comment False
5 Open File to Write Comments for

21
Settings/.skeinforge/profiles/extrusion/PLA0.3/cool.csv Normal file
View File

@ -0,0 +1,21 @@
Format is tab separated cool settings.
_Name Value
WindowPosition 700+0
Open File for Cool
Activate Cool True
Full Fan Speed (0 - 255): 255
Turn Fan On at Beginning False
Do Not Use Fan Before Layer (integer): 1
Force Fan on Bridge Layers False
Maximum Layer Time for Fan use (seconds): 240.0
Full Fan Speed Bellow Layer Time (seconds): 239.0
Orbit False
Slow Down True
Maximum Cool (Celcius): 2.0
Minimum Layer Time (seconds): 10.0
Minimum Orbital Radius (millimeters): 10.0
Name of Cool End File: cool_end.gcode
Name of Cool Start File: cool_start.gcode
Bridge Cool (Celcius): 1.0
Orbital Outset (millimeters): 2.0
Turn Fan Off at Ending False
1 Format is tab separated cool settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Cool
5 Activate Cool True
6 Full Fan Speed (0 - 255): 255
7 Turn Fan On at Beginning False
8 Do Not Use Fan Before Layer (integer): 1
9 Force Fan on Bridge Layers False
10 Maximum Layer Time for Fan use (seconds): 240.0
11 Full Fan Speed Bellow Layer Time (seconds): 239.0
12 Orbit False
13 Slow Down True
14 Maximum Cool (Celcius): 2.0
15 Minimum Layer Time (seconds): 10.0
16 Minimum Orbital Radius (millimeters): 10.0
17 Name of Cool End File: cool_end.gcode
18 Name of Cool Start File: cool_start.gcode
19 Bridge Cool (Celcius): 1.0
20 Orbital Outset (millimeters): 2.0
21 Turn Fan Off at Ending False

4
Settings/.skeinforge/profiles/extrusion/PLA0.3/description.csv Normal file
View File

@ -0,0 +1,4 @@
Format is tab separated description settings.
_Name Value
WindowPosition 700+0
Description Text: Write your description of the profile here.___replaced___newline___replaced___newlineSuggested format is a description, followed by a link to the profile post or web page.
1 Format is tab separated description settings.
2 _Name Value
3 WindowPosition 700+0
4 Description Text: Write your description of the profile here.___replaced___newline___replaced___newlineSuggested format is a description, followed by a link to the profile post or web page.

15
Settings/.skeinforge/profiles/extrusion/PLA0.3/dimension.csv Normal file
View File

@ -0,0 +1,15 @@
Format is tab separated dimension settings.
_Name Value
WindowPosition 700+0
Open File for Dimension
Activate Dimension True
Absolute Extrusion Distance False
Relative Extrusion Distance True
Extruder Retraction Speed (mm/s): 20.0
Filament Diameter (mm): 2.86
Filament Packing Density (ratio): 1.0
Maximum E Value before Reset (float): 91234.0
Minimum Travel for Retraction (millimeters): 1.0
Retract Within Island True
Retraction Distance (millimeters): 1.0
Restart Extra Distance (millimeters): 0.0
1 Format is tab separated dimension settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Dimension
5 Activate Dimension True
6 Absolute Extrusion Distance False
7 Relative Extrusion Distance True
8 Extruder Retraction Speed (mm/s): 20.0
9 Filament Diameter (mm): 2.86
10 Filament Packing Density (ratio): 1.0
11 Maximum E Value before Reset (float): 91234.0
12 Minimum Travel for Retraction (millimeters): 1.0
13 Retract Within Island True
14 Retraction Distance (millimeters): 1.0
15 Restart Extra Distance (millimeters): 0.0

9
Settings/.skeinforge/profiles/extrusion/PLA0.3/dwindle.csv Normal file
View File

@ -0,0 +1,9 @@
Format is tab separated dwindle settings.
_Name Value
WindowPosition 700+0
Open File for Dwindle
Activate Dwindle False
End Rate Multiplier (ratio): 0.5
Pent Up Volume (cubic millimeters): 0.4
Slowdown Steps (positive integer): 3
Slowdown Volume (cubic millimeters): 5.0
1 Format is tab separated dwindle settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Dwindle
5 Activate Dwindle False
6 End Rate Multiplier (ratio): 0.5
7 Pent Up Volume (cubic millimeters): 0.4
8 Slowdown Steps (positive integer): 3
9 Slowdown Volume (cubic millimeters): 5.0

22
Settings/.skeinforge/profiles/extrusion/PLA0.3/export.csv Normal file
View File

@ -0,0 +1,22 @@
Format is tab separated export settings.
_Name Value
WindowPosition 700+0
Open File for Export
Activate Export True
Add Descriptive Extension False
Add Export Suffix True
Add Profile Extension False
Add Timestamp Extension False
Also Send Output To:
Analyze Gcode True
Do Not Delete Comments False
Delete Crafting Comments False
Delete All Comments True
Do Not Change Output True
binary_16_byte False
gcode_step False
gcode_time_segment False
gcode_small False
File Extension: gcode
Name of Replace File: replace.csv
Save Penultimate Gcode False
1 Format is tab separated export settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Export
5 Activate Export True
6 Add Descriptive Extension False
7 Add Export Suffix True
8 Add Profile Extension False
9 Add Timestamp Extension False
10 Also Send Output To:
11 Analyze Gcode True
12 Do Not Delete Comments False
13 Delete Crafting Comments False
14 Delete All Comments True
15 Do Not Change Output True
16 binary_16_byte False
17 gcode_step False
18 gcode_time_segment False
19 gcode_small False
20 File Extension: gcode
21 Name of Replace File: replace.csv
22 Save Penultimate Gcode False

35
Settings/.skeinforge/profiles/extrusion/PLA0.3/fill.csv Normal file
View File

@ -0,0 +1,35 @@
Format is tab separated fill settings.
_Name Value
WindowPosition 700+0
Open File for Fill
Activate Fill True
Diaphragm Period (layers): 100
Diaphragm Thickness (layers): 0
Extra Shells on Alternating Solid Layer (layers): 1
Extra Shells on Base (layers): 1
Extra Shells on Sparse Layer (layers): 1
Grid Circle Separation over Perimeter Width (ratio): 0.2
Grid Extra Overlap (ratio): 0.1
Grid Junction Separation Band Height (layers): 10
Grid Junction Separation over Octogon Radius At End (ratio): 0.0
Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0
Infill Begin Rotation (degrees): 45.0
Infill Begin Rotation Repeat (layers): 1
Infill Odd Layer Extra Rotation (degrees): 90.0
Grid Circular False
Grid Hexagonal False
Grid Rectangular False
Line True
Infill Perimeter Overlap (ratio): 0.07
Infill Solidity (ratio): 0.25
Sharpest Angle (degrees): 60.0
Solid Surface Thickness (layers): 3
Lower Left True
Nearest False
Surrounding Angle (degrees): 60.0
Infill > Loops > Perimeter False
Infill > Perimeter > Loops False
Loops > Infill > Perimeter False
Loops > Perimeter > Infill True
Perimeter > Infill > Loops False
Perimeter > Loops > Infill False
1 Format is tab separated fill settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Fill
5 Activate Fill True
6 Diaphragm Period (layers): 100
7 Diaphragm Thickness (layers): 0
8 Extra Shells on Alternating Solid Layer (layers): 1
9 Extra Shells on Base (layers): 1
10 Extra Shells on Sparse Layer (layers): 1
11 Grid Circle Separation over Perimeter Width (ratio): 0.2
12 Grid Extra Overlap (ratio): 0.1
13 Grid Junction Separation Band Height (layers): 10
14 Grid Junction Separation over Octogon Radius At End (ratio): 0.0
15 Grid Junction Separation over Octogon Radius At Middle (ratio): 0.0
16 Infill Begin Rotation (degrees): 45.0
17 Infill Begin Rotation Repeat (layers): 1
18 Infill Odd Layer Extra Rotation (degrees): 90.0
19 Grid Circular False
20 Grid Hexagonal False
21 Grid Rectangular False
22 Line True
23 Infill Perimeter Overlap (ratio): 0.07
24 Infill Solidity (ratio): 0.25
25 Sharpest Angle (degrees): 60.0
26 Solid Surface Thickness (layers): 3
27 Lower Left True
28 Nearest False
29 Surrounding Angle (degrees): 60.0
30 Infill > Loops > Perimeter False
31 Infill > Perimeter > Loops False
32 Loops > Infill > Perimeter False
33 Loops > Perimeter > Infill True
34 Perimeter > Infill > Loops False
35 Perimeter > Loops > Infill False

13
Settings/.skeinforge/profiles/extrusion/PLA0.3/fillet.csv Normal file
View File

@ -0,0 +1,13 @@
Format is tab separated fillet settings.
_Name Value
WindowPosition 700+0
Open File to be Filleted
Activate Fillet False
Arc Point False
Arc Radius False
Arc Segment False
Bevel True
Corner Feed Rate Multiplier (ratio): 1.0
Fillet Radius over Perimeter Width (ratio): 0.35
Reversal Slowdown Distance over Perimeter Width (ratio): 0.5
Use Intermediate Feed Rate in Corners True
1 Format is tab separated fillet settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File to be Filleted
5 Activate Fillet False
6 Arc Point False
7 Arc Radius False
8 Arc Segment False
9 Bevel True
10 Corner Feed Rate Multiplier (ratio): 1.0
11 Fillet Radius over Perimeter Width (ratio): 0.35
12 Reversal Slowdown Distance over Perimeter Width (ratio): 0.5
13 Use Intermediate Feed Rate in Corners True

6
Settings/.skeinforge/profiles/extrusion/PLA0.3/home.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated home settings.
_Name Value
WindowPosition 700+0
Open File for Home
Activate Home False
Name of Home File: home.gcode
1 Format is tab separated home settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Home
5 Activate Home False
6 Name of Home File: home.gcode

7
Settings/.skeinforge/profiles/extrusion/PLA0.3/hop.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated hop settings.
_Name Value
WindowPosition 700+0
Open File for Hop
Activate Hop False
Hop Over Layer Thickness (ratio): 1.0
Minimum Hop Angle (degrees): 30.0
1 Format is tab separated hop settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Hop
5 Activate Hop False
6 Hop Over Layer Thickness (ratio): 1.0
7 Minimum Hop Angle (degrees): 30.0

12
Settings/.skeinforge/profiles/extrusion/PLA0.3/inset.csv Normal file
View File

@ -0,0 +1,12 @@
Format is tab separated inset settings.
_Name Value
WindowPosition 700+0
Open File for Inset
Add Custom Code for Temperature Reading False
Infill in Direction of Bridge True
Infill Width over Thickness (ratio): 1.5
Ascending Area False
Descending Area True
Overlap Removal Width over Perimeter Width (ratio): 0.0
Turn Extruder Heater Off at Shut Down False
Volume Fraction (ratio): 0.9
1 Format is tab separated inset settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Inset
5 Add Custom Code for Temperature Reading False
6 Infill in Direction of Bridge True
7 Infill Width over Thickness (ratio): 1.5
8 Ascending Area False
9 Descending Area True
10 Overlap Removal Width over Perimeter Width (ratio): 0.0
11 Turn Extruder Heater Off at Shut Down False
12 Volume Fraction (ratio): 0.9

7
Settings/.skeinforge/profiles/extrusion/PLA0.3/interpret.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated interpret settings.
_Name Value
WindowPosition 700+0
Open File for Interpret
Activate Interpret False
Print Interpretion False
Text Program: webbrowser
1 Format is tab separated interpret settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Interpret
5 Activate Interpret False
6 Print Interpretion False
7 Text Program: webbrowser

6
Settings/.skeinforge/profiles/extrusion/PLA0.3/jitter.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated jitter settings.
_Name Value
WindowPosition 700+0
Open File for Jitter
Activate Jitter True
Jitter Over Perimeter Width (ratio): 10.0
1 Format is tab separated jitter settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Jitter
5 Activate Jitter True
6 Jitter Over Perimeter Width (ratio): 10.0

7
Settings/.skeinforge/profiles/extrusion/PLA0.3/lash.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated lash settings.
_Name Value
WindowPosition 700+0
Open File for Lash
Activate Lash False
X Backlash (mm): 0.2
Y Backlash (mm): 0.3
1 Format is tab separated lash settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Lash
5 Activate Lash False
6 X Backlash (mm): 0.2
7 Y Backlash (mm): 0.3

6
Settings/.skeinforge/profiles/extrusion/PLA0.3/limit.csv Normal file
View File

@ -0,0 +1,6 @@
Format is tab separated limit settings.
_Name Value
WindowPosition 700+0
Open File for Limit
Activate Limit False
Maximum Initial Feed Rate (mm/s): 1.0
1 Format is tab separated limit settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Limit
5 Activate Limit False
6 Maximum Initial Feed Rate (mm/s): 1.0

11
Settings/.skeinforge/profiles/extrusion/PLA0.3/multiply.csv Normal file
View File

@ -0,0 +1,11 @@
Format is tab separated multiply settings.
_Name Value
WindowPosition 700+0
Open File for Multiply H:/CHRIS/Projects/RepRaptor/Mendel/YAGE/drive-gear-with-boss_export.gcode
Activate Multiply True
Center X (mm): 0.0
Center Y (mm): 0.0
Number of Columns (integer): 1
Number of Rows (integer): 1
Reverse Sequence every Odd Layer False
Separation over Perimeter Width (ratio): 3.0
1 Format is tab separated multiply settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Multiply H:/CHRIS/Projects/RepRaptor/Mendel/YAGE/drive-gear-with-boss_export.gcode
5 Activate Multiply True
6 Center X (mm): 0.0
7 Center Y (mm): 0.0
8 Number of Columns (integer): 1
9 Number of Rows (integer): 1
10 Reverse Sequence every Odd Layer False
11 Separation over Perimeter Width (ratio): 3.0

13
Settings/.skeinforge/profiles/extrusion/PLA0.3/oozebane.csv Normal file
View File

@ -0,0 +1,13 @@
Format is tab separated oozebane settings.
_Name Value
WindowPosition 700+0
Open File for Oozebane
Activate Oozebane False
After Startup Distance (millimeters): 1.2
Early Shutdown Distance (millimeters): 1.2
Early Startup Distance Constant (millimeters): 20.0
Early Startup Maximum Distance (millimeters): 1.2
First Early Startup Distance (millimeters): 25.0
Minimum Distance for Early Startup (millimeters): 0.0
Minimum Distance for Early Shutdown (millimeters): 0.0
Slowdown Startup Steps (positive integer): 3
1 Format is tab separated oozebane settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Oozebane
5 Activate Oozebane False
6 After Startup Distance (millimeters): 1.2
7 Early Shutdown Distance (millimeters): 1.2
8 Early Startup Distance Constant (millimeters): 20.0
9 Early Startup Maximum Distance (millimeters): 1.2
10 First Early Startup Distance (millimeters): 25.0
11 Minimum Distance for Early Startup (millimeters): 0.0
12 Minimum Distance for Early Shutdown (millimeters): 0.0
13 Slowdown Startup Steps (positive integer): 3

10
Settings/.skeinforge/profiles/extrusion/PLA0.3/preface.csv Normal file
View File

@ -0,0 +1,10 @@
Format is tab separated preface settings.
_Name Value
WindowPosition 700+0
Open File for Preface
Meta:
Set Positioning to Absolute False
Set Units to Millimeters False
Start at Home False
Turn Extruder Off at Shut Down False
Turn Extruder Off at Start Up False
1 Format is tab separated preface settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Preface
5 Meta:
6 Set Positioning to Absolute False
7 Set Units to Millimeters False
8 Start at Home False
9 Turn Extruder Off at Shut Down False
10 Turn Extruder Off at Start Up False

33
Settings/.skeinforge/profiles/extrusion/PLA0.3/raft.csv Normal file
View File

@ -0,0 +1,33 @@
Format is tab separated raft settings.
_Name Value
WindowPosition 700+0
Open File for Raft
Activate Raft False
Add Raft, Elevate Nozzle, Orbit: True
Base Feed Rate Multiplier (ratio): 1.0
Base Flow Rate Multiplier (ratio): 1.0
Base Infill Density (ratio): 0.5
Base Layer Thickness over Layer Thickness: 2.0
Base Layers (integer): 0
Base Nozzle Lift over Base Layer Thickness (ratio): 0.4
Initial Circling: False
Infill Overhang over Extrusion Width (ratio): 0.05
Interface Feed Rate Multiplier (ratio): 1.0
Interface Flow Rate Multiplier (ratio): 1.0
Interface Infill Density (ratio): 1.0
Interface Layer Thickness over Layer Thickness: 1.0
Interface Layers (integer): 0
Interface Nozzle Lift over Interface Layer Thickness (ratio): 0.45
Name of Support End File: support_end.gcode
Name of Support Start File: support_start.gcode
Operating Nozzle Lift over Layer Thickness (ratio): 0.5
Raft Additional Margin over Length (%): 1.0
Raft Margin (mm): 5.0
Support Cross Hatch False
Support Flow Rate over Operating Flow Rate (ratio): 1.0
Support Gap over Perimeter Extrusion Width (ratio): 0.0
None False
Empty Layers Only False
Everywhere False
Exterior Only True
Support Minimum Angle (degrees): 40.0
1 Format is tab separated raft settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Raft
5 Activate Raft False
6 Add Raft, Elevate Nozzle, Orbit: True
7 Base Feed Rate Multiplier (ratio): 1.0
8 Base Flow Rate Multiplier (ratio): 1.0
9 Base Infill Density (ratio): 0.5
10 Base Layer Thickness over Layer Thickness: 2.0
11 Base Layers (integer): 0
12 Base Nozzle Lift over Base Layer Thickness (ratio): 0.4
13 Initial Circling: False
14 Infill Overhang over Extrusion Width (ratio): 0.05
15 Interface Feed Rate Multiplier (ratio): 1.0
16 Interface Flow Rate Multiplier (ratio): 1.0
17 Interface Infill Density (ratio): 1.0
18 Interface Layer Thickness over Layer Thickness: 1.0
19 Interface Layers (integer): 0
20 Interface Nozzle Lift over Interface Layer Thickness (ratio): 0.45
21 Name of Support End File: support_end.gcode
22 Name of Support Start File: support_start.gcode
23 Operating Nozzle Lift over Layer Thickness (ratio): 0.5
24 Raft Additional Margin over Length (%): 1.0
25 Raft Margin (mm): 5.0
26 Support Cross Hatch False
27 Support Flow Rate over Operating Flow Rate (ratio): 1.0
28 Support Gap over Perimeter Extrusion Width (ratio): 0.0
29 None False
30 Empty Layers Only False
31 Everywhere False
32 Exterior Only True
33 Support Minimum Angle (degrees): 40.0

8
Settings/.skeinforge/profiles/extrusion/PLA0.3/scale.csv Normal file
View File

@ -0,0 +1,8 @@
Format is tab separated scale settings.
_Name Value
WindowPosition 700+0
Open File for Scale
Activate Scale False
XY Plane Scale (ratio): 1.01
Z Axis Scale (ratio): 1.0
SVG Viewer: webbrowser
1 Format is tab separated scale settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Scale
5 Activate Scale False
6 XY Plane Scale (ratio): 1.01
7 Z Axis Scale (ratio): 1.0
8 SVG Viewer: webbrowser

9
Settings/.skeinforge/profiles/extrusion/PLA0.3/skeinforge.csv Normal file
View File

@ -0,0 +1,9 @@
Format is tab separated skeinforge settings.
_Name Value
WindowPosition 548+0
Open File for Skeinforge D:/dist/android.stl
analyze False
craft True
help False
meta False
profile False
1 Format is tab separated skeinforge settings.
2 _Name Value
3 WindowPosition 548+0
4 Open File for Skeinforge D:/dist/android.stl
5 analyze False
6 craft True
7 help False
8 meta False
9 profile False

12
Settings/.skeinforge/profiles/extrusion/PLA0.3/skeinforge_analyze.csv Normal file
View File

@ -0,0 +1,12 @@
Format is tab separated skeinforge analyze settings.
_Name Value
WindowPosition 600+0
Open File for Analyze
clairvoyance False
comment False
interpret False
skeiniso False
skeinlayer False
statistic False
synopsis False
vectorwrite True
1 Format is tab separated skeinforge analyze settings.
2 _Name Value
3 WindowPosition 600+0
4 Open File for Analyze
5 clairvoyance False
6 comment False
7 interpret False
8 skeiniso False
9 skeinlayer False
10 statistic False
11 synopsis False
12 vectorwrite True

49
Settings/.skeinforge/profiles/extrusion/PLA0.3/skeinforge_craft.csv Normal file
View File

@ -0,0 +1,49 @@
Format is tab separated skeinforge craft settings.
_Name Value
WindowPosition 600+0
Open File for Craft
alteration False
bottom False
carve False
chamber False
chop False
cleave False
clip False
coil False
comb False
cool False
dimension False
drill False
dwindle False
export False
feed False
fill False
fillet False
flow False
home False
hop False
inset False
jitter False
lash False
lift False
limit False
mill False
multiply False
oozebane False
original_cool False
outset False
preface False
raft False
scale False
skin False
skirt False
smooth False
speed True
splodge False
stretch False
temperature False
tower False
unpause False
whittle False
widen False
wipe False
1 Format is tab separated skeinforge craft settings.
2 _Name Value
3 WindowPosition 600+0
4 Open File for Craft
5 alteration False
6 bottom False
7 carve False
8 chamber False
9 chop False
10 cleave False
11 clip False
12 coil False
13 comb False
14 cool False
15 dimension False
16 drill False
17 dwindle False
18 export False
19 feed False
20 fill False
21 fillet False
22 flow False
23 home False
24 hop False
25 inset False
26 jitter False
27 lash False
28 lift False
29 limit False
30 mill False
31 multiply False
32 oozebane False
33 original_cool False
34 outset False
35 preface False
36 raft False
37 scale False
38 skin False
39 skirt False
40 smooth False
41 speed True
42 splodge False
43 stretch False
44 temperature False
45 tower False
46 unpause False
47 whittle False
48 widen False
49 wipe False

4
Settings/.skeinforge/profiles/extrusion/PLA0.3/skeinforge_help.csv Normal file
View File

@ -0,0 +1,4 @@
Format is tab separated skeinforge help settings.
_Name Value
WindowPosition 600+0
Wiki Manual Primary True
1 Format is tab separated skeinforge help settings.
2 _Name Value
3 WindowPosition 600+0
4 Wiki Manual Primary True

5
Settings/.skeinforge/profiles/extrusion/PLA0.3/skeinforge_meta.csv Normal file
View File

@ -0,0 +1,5 @@
Format is tab separated skeinforge meta settings.
_Name Value
WindowPosition 600+0
description False
polyfile True
1 Format is tab separated skeinforge meta settings.
2 _Name Value
3 WindowPosition 600+0
4 description False
5 polyfile True

5
Settings/.skeinforge/profiles/extrusion/PLA0.3/skeinforge_polyfile.csv Normal file
View File

@ -0,0 +1,5 @@
Format is tab separated skeinforge polyfile settings.
_Name Value
WindowPosition 600+0
Execute All Unmodified Files in a Directory False
Execute File True
1 Format is tab separated skeinforge polyfile settings.
2 _Name Value
3 WindowPosition 600+0
4 Execute All Unmodified Files in a Directory False
5 Execute File True

41
Settings/.skeinforge/profiles/extrusion/PLA0.3/skeiniso.csv Normal file
View File

@ -0,0 +1,41 @@
Format is tab separated skeiniso settings.
_Name Value
WindowPosition 700+0
Open File for Skeiniso
Activate Skeiniso False
Frame List
Animation Line Quickening (ratio): 1.0
Animation Slide Show Rate (layers/second): 2.0
Axis Rulings True
Band Height (layers): 5
Bottom Band Brightness (ratio): 0.7
Bottom Layer Brightness (ratio): 1.0
From the Bottom False
From the Top True
Draw Arrows False
Go Around Extruder Off Travel False
Layer (index): 0
Layer Extra Span (integer): 912345678
Line (index): 0
Display Line True
View Move False
View Rotate False
Number of Fill Bottom Layers (integer): 1
Number of Fill Top Layers (integer): 1
Scale (pixels per millimeter): 15.0
Screen Horizontal Inset (pixels): 100
Screen Vertical Inset (pixels): 220
Show Gcode True
Viewpoint Latitude (degrees): 15.0
Viewpoint Longitude (degrees): 210.0
Width of Axis Negative Side (pixels): 2
Width of Axis Positive Side (pixels): 6
Width of Fill Bottom Thread (pixels): 2
Width of Fill Top Thread (pixels): 2
Width of Infill Thread (pixels): 1
Width of Loop Thread (pixels): 2
Width of Perimeter Inside Thread (pixels): 8
Width of Perimeter Outside Thread (pixels): 8
Width of Raft Thread (pixels): 1
Width of Selection Thread (pixels): 6
Width of Travel Thread (pixels): 0
1 Format is tab separated skeiniso settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Skeiniso
5 Activate Skeiniso False
6 Frame List
7 Animation Line Quickening (ratio): 1.0
8 Animation Slide Show Rate (layers/second): 2.0
9 Axis Rulings True
10 Band Height (layers): 5
11 Bottom Band Brightness (ratio): 0.7
12 Bottom Layer Brightness (ratio): 1.0
13 From the Bottom False
14 From the Top True
15 Draw Arrows False
16 Go Around Extruder Off Travel False
17 Layer (index): 0
18 Layer Extra Span (integer): 912345678
19 Line (index): 0
20 Display Line True
21 View Move False
22 View Rotate False
23 Number of Fill Bottom Layers (integer): 1
24 Number of Fill Top Layers (integer): 1
25 Scale (pixels per millimeter): 15.0
26 Screen Horizontal Inset (pixels): 100
27 Screen Vertical Inset (pixels): 220
28 Show Gcode True
29 Viewpoint Latitude (degrees): 15.0
30 Viewpoint Longitude (degrees): 210.0
31 Width of Axis Negative Side (pixels): 2
32 Width of Axis Positive Side (pixels): 6
33 Width of Fill Bottom Thread (pixels): 2
34 Width of Fill Top Thread (pixels): 2
35 Width of Infill Thread (pixels): 1
36 Width of Loop Thread (pixels): 2
37 Width of Perimeter Inside Thread (pixels): 8
38 Width of Perimeter Outside Thread (pixels): 8
39 Width of Raft Thread (pixels): 1
40 Width of Selection Thread (pixels): 6
41 Width of Travel Thread (pixels): 0

23
Settings/.skeinforge/profiles/extrusion/PLA0.3/skeinlayer.csv Normal file
View File

@ -0,0 +1,23 @@
Format is tab separated skeinlayer settings.
_Name Value
WindowPosition 700+0
Open File for Skeinlayer
Activate Skeinlayer True
Frame List
Animation Line Quickening (ratio): 1.0
Animation Slide Show Rate (layers/second): 2.0
Draw Arrows True
Go Around Extruder Off Travel False
Layer (index): 25
Layer Extra Span (integer): 0
Line (index): 0
Display Line True
View Move False
Scale (pixels per millimeter): 10.0
Screen Horizontal Inset (pixels): 100
Screen Vertical Inset (pixels): 220
Show Gcode True
Show Position True
Width of Extrusion Thread (pixels): 3
Width of Selection Thread (pixels): 6
Width of Travel Thread (pixels): 1
1 Format is tab separated skeinlayer settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Skeinlayer
5 Activate Skeinlayer True
6 Frame List
7 Animation Line Quickening (ratio): 1.0
8 Animation Slide Show Rate (layers/second): 2.0
9 Draw Arrows True
10 Go Around Extruder Off Travel False
11 Layer (index): 25
12 Layer Extra Span (integer): 0
13 Line (index): 0
14 Display Line True
15 View Move False
16 Scale (pixels per millimeter): 10.0
17 Screen Horizontal Inset (pixels): 100
18 Screen Vertical Inset (pixels): 220
19 Show Gcode True
20 Show Position True
21 Width of Extrusion Thread (pixels): 3
22 Width of Selection Thread (pixels): 6
23 Width of Travel Thread (pixels): 1

10
Settings/.skeinforge/profiles/extrusion/PLA0.3/skin.csv Normal file
View File

@ -0,0 +1,10 @@
Format is tab separated skin settings.
_Name Value
WindowPosition 700+0
Open File for Skin
Activate Skin False
Horizontal Infill Divisions (integer): 2
Horizontal Perimeter Divisions (integer): 1
Vertical Divisions (integer): 2
Hop When Extruding Infill False
Layers From (index): 1
1 Format is tab separated skin settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Skin
5 Activate Skin False
6 Horizontal Infill Divisions (integer): 2
7 Horizontal Perimeter Divisions (integer): 1
8 Vertical Divisions (integer): 2
9 Hop When Extruding Infill False
10 Layers From (index): 1

8
Settings/.skeinforge/profiles/extrusion/PLA0.3/skirt.csv Normal file
View File

@ -0,0 +1,8 @@
Format is tab separated skirt settings.
_Name Value
WindowPosition 700+0
Open File for Skirt
Activate Skirt True
Convex: False
Gap over Perimeter Width (ratio): 10.0
Layers To (index): 1
1 Format is tab separated skirt settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Skirt
5 Activate Skirt True
6 Convex: False
7 Gap over Perimeter Width (ratio): 10.0
8 Layers To (index): 1

7
Settings/.skeinforge/profiles/extrusion/PLA0.3/smooth.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated smooth settings.
_Name Value
WindowPosition 700+0
Open File for Smooth
Activate Smooth False
Layers From (index): 1
Maximum Shortening over Width (float): 1.2
1 Format is tab separated smooth settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Smooth
5 Activate Smooth False
6 Layers From (index): 1
7 Maximum Shortening over Width (float): 1.2

21
Settings/.skeinforge/profiles/extrusion/PLA0.3/speed.csv Normal file
View File

@ -0,0 +1,21 @@
Format is tab separated speed settings.
_Name Value
WindowPosition 700+0
Open File for Speed
Activate Speed True
Add Flow Rate: True
Bridge Feed Rate Multiplier (ratio): 1.0
Bridge Flow Rate Multiplier (ratio): 1.0
Duty Cyle at Beginning (portion): 1.0
Duty Cyle at Ending (portion): 0.0
Feed Rate (mm/s): 40.0
Flow Rate Setting (float): 40.0
Object First Layer Feed Rate Infill Multiplier (ratio): 0.5
Object First Layer Feed Rate Perimeter Multiplier (ratio): 0.5
Object First Layer Flow Rate Infill Multiplier (ratio): 0.5
Object First Layer Flow Rate Perimeter Multiplier (ratio): 0.5
Orbital Feed Rate over Operating Feed Rate (ratio): 0.5
Maximum Z Feed Rate (mm/s): 8.0
Perimeter Feed Rate Multiplier (ratio): 1.0
Perimeter Flow Rate Multiplier (ratio): 0.857
Travel Feed Rate (mm/s): 200.0
1 Format is tab separated speed settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Speed
5 Activate Speed True
6 Add Flow Rate: True
7 Bridge Feed Rate Multiplier (ratio): 1.0
8 Bridge Flow Rate Multiplier (ratio): 1.0
9 Duty Cyle at Beginning (portion): 1.0
10 Duty Cyle at Ending (portion): 0.0
11 Feed Rate (mm/s): 40.0
12 Flow Rate Setting (float): 40.0
13 Object First Layer Feed Rate Infill Multiplier (ratio): 0.5
14 Object First Layer Feed Rate Perimeter Multiplier (ratio): 0.5
15 Object First Layer Flow Rate Infill Multiplier (ratio): 0.5
16 Object First Layer Flow Rate Perimeter Multiplier (ratio): 0.5
17 Orbital Feed Rate over Operating Feed Rate (ratio): 0.5
18 Maximum Z Feed Rate (mm/s): 8.0
19 Perimeter Feed Rate Multiplier (ratio): 1.0
20 Perimeter Flow Rate Multiplier (ratio): 0.857
21 Travel Feed Rate (mm/s): 200.0

11
Settings/.skeinforge/profiles/extrusion/PLA0.3/splodge.csv Normal file
View File

@ -0,0 +1,11 @@
Format is tab separated splodge settings.
_Name Value
WindowPosition 700+0
Open File for Splodge
Activate Splodge False
Initial Lift over Extra Thickness (ratio): 1.0
Initial Splodge Feed Rate (mm/s): 1.0
Initial Splodge Quantity Length (millimeters): 30.0
Operating Lift over Extra Thickness (ratio): 1.0
Operating Splodge Feed Rate (mm/s): 1.0
Operating Splodge Quantity Length (millimeters): 1.0
1 Format is tab separated splodge settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Splodge
5 Activate Splodge False
6 Initial Lift over Extra Thickness (ratio): 1.0
7 Initial Splodge Feed Rate (mm/s): 1.0
8 Initial Splodge Quantity Length (millimeters): 30.0
9 Operating Lift over Extra Thickness (ratio): 1.0
10 Operating Splodge Feed Rate (mm/s): 1.0
11 Operating Splodge Quantity Length (millimeters): 1.0

10
Settings/.skeinforge/profiles/extrusion/PLA0.3/statistic.csv Normal file
View File

@ -0,0 +1,10 @@
Format is tab separated statistic settings.
_Name Value
WindowPosition 700+0
Activate Statistic True
Machine Time ($/hour): 1.0
Material ($/kg): 20.0
Density (kg/m3): 930.0
Open File to Generate Statistics for
Print Statistics True
Save Statistics False
1 Format is tab separated statistic settings.
2 _Name Value
3 WindowPosition 700+0
4 Activate Statistic True
5 Machine Time ($/hour): 1.0
6 Material ($/kg): 20.0
7 Density (kg/m3): 930.0
8 Open File to Generate Statistics for
9 Print Statistics True
10 Save Statistics False

11
Settings/.skeinforge/profiles/extrusion/PLA0.3/stretch.csv Normal file
View File

@ -0,0 +1,11 @@
Format is tab separated stretch settings.
_Name Value
WindowPosition 700+0
Open File for Stretch
Activate Stretch False
Cross Limit Distance Over Perimeter Width (ratio): 5.0
Loop Stretch Over Perimeter Width (ratio): 0.11
Path Stretch Over Perimeter Width (ratio): 0.0
Perimeter Inside Stretch Over Perimeter Width (ratio): 0.32
Perimeter Outside Stretch Over Perimeter Width (ratio): 0.1
Stretch From Distance Over Perimeter Width (ratio): 2.0
1 Format is tab separated stretch settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Stretch
5 Activate Stretch False
6 Cross Limit Distance Over Perimeter Width (ratio): 5.0
7 Loop Stretch Over Perimeter Width (ratio): 0.11
8 Path Stretch Over Perimeter Width (ratio): 0.0
9 Perimeter Inside Stretch Over Perimeter Width (ratio): 0.32
10 Perimeter Outside Stretch Over Perimeter Width (ratio): 0.1
11 Stretch From Distance Over Perimeter Width (ratio): 2.0

7
Settings/.skeinforge/profiles/extrusion/PLA0.3/synopsis.csv Normal file
View File

@ -0,0 +1,7 @@
Format is tab separated synopsis settings.
_Name Value
WindowPosition 700+0
Activate Synopsis False
Open File to Write Synopsis for
Export Profile As CSV File True
Export Profile As Zip File False
1 Format is tab separated synopsis settings.
2 _Name Value
3 WindowPosition 700+0
4 Activate Synopsis False
5 Open File to Write Synopsis for
6 Export Profile As CSV File True
7 Export Profile As Zip File False

14
Settings/.skeinforge/profiles/extrusion/PLA0.3/temperature.csv Normal file
View File

@ -0,0 +1,14 @@
Format is tab separated temperature settings.
_Name Value
WindowPosition 600+0
Open File for Temperature
Activate Temperature False
Cooling Rate (Celcius/second): 3.0
Heating Rate (Celcius/second): 10.0
Base Temperature (Celcius): 200.0
Interface Temperature (Celcius): 200.0
Object First Layer Infill Temperature (Celcius): 195.0
Object First Layer Perimeter Temperature (Celcius): 220.0
Object Next Layers Temperature (Celcius): 230.0
Support Layers Temperature (Celcius): 200.0
Supported Layers Temperature (Celcius): 230.0
1 Format is tab separated temperature settings.
2 _Name Value
3 WindowPosition 600+0
4 Open File for Temperature
5 Activate Temperature False
6 Cooling Rate (Celcius/second): 3.0
7 Heating Rate (Celcius/second): 10.0
8 Base Temperature (Celcius): 200.0
9 Interface Temperature (Celcius): 200.0
10 Object First Layer Infill Temperature (Celcius): 195.0
11 Object First Layer Perimeter Temperature (Celcius): 220.0
12 Object Next Layers Temperature (Celcius): 230.0
13 Support Layers Temperature (Celcius): 200.0
14 Supported Layers Temperature (Celcius): 230.0

8
Settings/.skeinforge/profiles/extrusion/PLA0.3/tower.csv Normal file
View File

@ -0,0 +1,8 @@
Format is tab separated tower settings.
_Name Value
WindowPosition 700+0
Open File for Tower
Activate Tower False
Extruder Possible Collision Cone Angle (degrees): 60.0
Maximum Tower Height (layers): 5
Tower Start Layer (integer): 1
1 Format is tab separated tower settings.
2 _Name Value
3 WindowPosition 700+0
4 Open File for Tower
5 Activate Tower False
6 Extruder Possible Collision Cone Angle (degrees): 60.0
7 Maximum Tower Height (layers): 5
8 Tower Start Layer (integer): 1

Some files were not shown because too many files have changed in this diff Show More